Regulating the osteogenic function of rhBMP 2 by different titanium surface properties

Osteogenic properties of bioactive titanium in inflammatory environment

OBJECTIVES

It is very important that the effects of surface modified titanium on osteogenic differentiation of bone marrow mesenchymal stem cells in the process of bone regeneration. The bio-function of modified titanium could be affected by the inflammatory micro-environment. The aim of this study was to investigate the effects of modified titanium on osteogenic differentiation in the inflammatory conditions and the osteogenic properties of the modified titanium dental implant in vivo.

METHODS

The medical pure titanium metals (PT-Ti) subjected to Anodic Oxidation (AO-Ti), Sand Blasting/acid etching (SLA-Ti) and Plasma-sprayed HA coating (HA coating-Ti) were used for regulating the osteogenic properties of MSCs in the normal and inflammatory conditions.

RESULTS

The amount of the MSCs in the inflammatory environment were more similar to that in the non-inflammatory environment after cultured on AO-Ti samples for 7D. However, the proliferation of the MSCs was obviously inhibited on the other groups in the inflammatory condition. The morphology of MSC cells on the modified titanium surface was affected in the inflammatory conditions and the AO-Ti was more conducive to maintain the skeletal morphology of MSCs. The results of osteogenic related proteins expression showed that the amount of BMP-2 on AO-Ti group was the highest in the inflammatory conditions, and followed the order of AO-Ti > HA coating-Ti > SLA-Ti > PT-Ti. What's more, the AO-Ti samples were more beneficial to promote the expression of osteogenic genes ALP, OCN, COL-I and Runx2 in the inflammatory conditions. The results of osteogenic properties in vivo showed that the gingival depth of the AO-Ti group was smaller than that on the other groups. Some new bone could be observed around the AO-Ti implant at two weeks. The bone binding rates on AO-Ti group was the highest of 81.3% after implanted for one year.

SIGNIFICANCE

The AO-Ti was beneficial to osteogenic differentiation than other modified titanium metals in inflammatory condition. The anodic oxidation is an effective surface modification method on titanium to promote bone regeneration.

Promoted Abutment-Soft Tissue Integration Around Self-Glazed Zirconia Surfaces with Nanotopography Fabricated by Additive 3D Gel Deposition

Introduction

Improving the biological sealing around dental abutments could promote the long-term success of implants. Although titanium abutments have a wide range of clinical applications, they incur esthetic risks due to their color, especially in the esthetic zone. Currently, zirconia has been applied as an esthetic alternative material for implant abutments; however, zirconia is purported to be an inert biomaterial. How to improve the biological activities of zirconia has thus become a popular research topic. In this study, we presented a novel self-glazed zirconia (SZ) surface with nanotopography fabricated by additive 3D gel deposition and investigated its soft tissue integration capability compared to that of clinically used titanium and polished conventional zirconia surfaces.

Materials and Methods

Three groups of disc samples were prepared for in vitro study and the three groups of abutment samples were prepared for in vivo study. The surface topography, roughness, wettability and chemical composition of the samples were examined. Moreover, we analyzed the effect of the three groups of samples on protein adsorption and on the biological behavior of human gingival keratinocytes (HGKs) and human gingival fibroblasts (HGFs). Furthermore, we conducted an in vivo study in which the bilateral mandibular anterior teeth of rabbits were extracted and replaced with implants and corresponding abutments.

Results

The surface of SZ showed a unique nanotopography with nm range roughness and a greater ability to absorb protein. The promoted expression of adhesion molecules in both HGKs and HGFs was observed on the SZ surface compared to the surfaces of Ti and PCZ, while the cell viability and proliferation of HGKs and the number of HGFs adhesion were not significant among all groups. In vivo results showed that the SZ abutment formed strong biological sealing at the abutment-soft tissue interface and exhibited markedly more hemidesmosomes when observed with a transmission electron microscope.

Conclusion

These results demonstrated that the novel SZ surface with nanotopography promoted soft tissue integration, suggesting its promising application as a zirconia surface for the dental abutment.

Nano-Hydroxyapatite Scaffold Based on Recombinant Human Bone Morphogenetic Protein 2 and Its Application in Bone Defect Repair

The best way in which to prepare scaffolds with good biological properties is an urgent problem in the field of tissue engineering. In this paper we discuss the preparation of nano-hydroxyapatite scaffold of recombinant human bone morphogenetic protein-2 (rhBMP-2) and its application in bone defect repair. rhBMP-2 reagent was dissolved in 1 mol/L sodium dihydrogen phosphate solution, and the rhBMP-2 solution was added to the nano-hydroxyapatite artificial bone with a 100 μL glass micro dropper at the rate of 10 drops/min to obtain Nano-HA/rhBMP-2 composite artificial bone. In in vivo experiments, rabbits were fixed on an operating table, a 2 cm longitudinal incision was made in the middle part of the radial forearm, and the radius was cut with a wire saw and periosteum, 2.5 cm away from the distal radius. After washing the wound with normal saline, Adv-hBMP-2/MC3T3-E1 nano-HA composite artificial bone, MC3T3-E1 nan-HA composite artificial bone, or Nano-HA artificial bone were implanted in different groups. The artificial bone scaffold prepared in this study has a stronger ability to repair bone defects than the alternatives, and is a promising prospect for the clinical treatment of bone defects.

Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features

Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.

Synergistic Effect of rhBMP-2 Protein and Nanotextured Titanium Alloy Surface to Improve Osteogenic Implant Properties

One of the major limitations during titanium (Ti) implant osseointegration is the poor cellular interactions at the biointerface. In the present study, the combined effect of recombinant human Bone Morphogenetic Protein-2 (rhBMP-2) and nanopatterned Ti6Al4V fabricated with Directed irradiation synthesis (DIS) is investigated in vitro. This environmentally-friendly plasma uses ions to create self-organized nanostructures on the surfaces. Nanocones (≈36.7 nm in DIS 80°) and thinner nanowalls (≈16.5 nm in DIS 60°) were fabricated depending on DIS incidence angle and observed via scanning electron microscopy. All samples have a similar crystalline structure and wettability, except for sandblasted/acid-etched (SLA) and acid-etched/anodized (Anodized) samples which are more hydrophilic. Biological results revealed that the viability and adhesion properties (vinculin expression and cell spreading) of DIS 80° with BMP-2 were similar to those polished with BMP-2, yet we observed more filopodia on DIS 80° (≈39 filopodia/cell) compared to the other samples (<30 filopodia/cell). BMP-2 increased alkaline phosphatase activity in all samples, tending to be higher in DIS 80°. Moreover, in the mineralization studies, DIS 80° with BMP-2 and Anodized with BMP-2 increased the formation of calcium deposits (>3.3 fold) compared to polished with BMP-2. Hence, this study shows there is a synergistic effect of BMP-2 and DIS surface modification in improving Ti biological properties which could be applied to Ti bone implants to treat bone disease.

Osteogenic properties of bioactive sodium titanate/titanium oxide composite coating prepared by anodic oxidation in NaOH electrolyte

Our sodium titanate/titanium oxide coating has excellent osteogenic performance and has potential to be used as a bone repair material.

Design of hydroxyapatite bioceramics with micro-/nano-topographies to regulate the osteogenic activities of bone morphogenetic protein-2 and bone marrow stromal cells

Biomimicking the nanostructure of natural bone apatite to enhance the bioactivity of hydroxyapatite (HA) biomaterials is an eternal topic in the bone regeneration field. In the present study, we designed four kinds of HA bioceramics with micro- to nanosized grains and investigated the effects of bioceramic topographies on the structures of bone morphogenetic protein-2 (BMP-2) and the effects on the responses of bone marrow stromal cells (BMSCs). Compared to the samples with submicron-scale crystalline particles, HA bioceramics with grain sizes of 104.6 ± 27.8 nm exhibited increased roughness, improved hydrophilicity and enhanced mechanical properties. The synergistic effects of these surface characteristics could well maintain the conformation of BMP-2, facilitate cell adhesion and spreading, and activate the osteogenic differentiation of BMSCs. Furthermore, SBF immersion and in vivo canine intramuscular implantation confirmed that the HA bioceramics with nanotopography also processed excellent bone-like apatite forming ability and outstanding osteoinductivity. In summary, these findings suggest that the nanotopography of HA bioceramics is a critical factor to enhance their bioactivity and osteoinductivity.

Effects of statherin on the biological properties of titanium metals subjected to different surface modification

The failure of dental implants is usually caused by bacteria infection, poor bioactivity and biocompatibility. It is a common phenomenon clinically. Statherin, a salivary protein, plays a crucial role of mediator between materials and cells/bacteria. However, the conformation of statherin might be changed by the implants in vivo. In this study, we investigated the effects of statherin on the bioactivities, antibacterial abilities and biocompatibilities of the titanium metals and the reaction mechanism. We found that the conformation of statherin was mainly influenced by surface composition, surface structure, surface roughness, surface hydrophilia and Ti-OH groups of materials. Statherin could decrease the cell biocompatibility of the titanium metals including pure titanium (PT), anodic oxidation (AO), sandblasting and etching (SLA) and plasma spraying hydroxyapatite (HA) coating in HGF cell experiments, regulate the bio-mineralization ability of HA coating in SBF, and enhance the antibacterial properties of PT and HA coating. This study revealed that surface properties of materials could change the conformation of statherin, which influenced the bioactivities, antibacterial properties and biocompatibilities of the materials in return.

Effect of Novel Micro-Arc Oxidation Implant Material on Preventing Peri-Implantitis

Dental implants occasionally fail for many reasons, especially peri-implantitis. The adhesion of bacteria to the surface of titanium is the initial factor in peri-implantitis. Therefore, the aim of this study was to assess the effect of a novel micro-arc oxidation (MAO) titanium on bacteria inhibition and regulation through periodontitis, and on a healthy saliva-derived biofilm, in vitro. MAO, sandblasting and acid etching (SLA), machined titanium and plasma-sprayed hydroxyapatite (HA) were selected for further study. The metabolic activity and biomass accumulation were tested using MTT (3-(4,5-Dimethyl-thiazol-2-yl)-2,5-diphenyltetrazolium bromide) and crystal violet assay after 24 h of anaerobic incubation. The structure was determined by scanning electron microscopy (SEM) and live/dead staining. Moreover, 16S rDNA sequencing was used to assess the microbial community. The results showed that biofilms on MAO were thinner compared to HA and SLA. In the periodontitis group, the biofilm accumulation and metabolic activity reached the highest levels in the HA group (p < 0.05); MAO titanium had the smallest biofilm accumulation and higher live/dead ratio; and the relative abundance of Lactobacillus in the SLA, HA and MAO groups increased significantly compared to the machined group (p < 0.05). In the healthy group, the relative abundance of Lactobacillus in the MAO group increased significantly compared to the other three groups (p < 0.05); the amount and metabolism activity of bacteria in the MAO group was lower (p < 0.05); MAO titanium had the least biofilm accumulation and a higher live/dead ratio. In conclusion, the novel MAO titanium had the ability to combat peri-implantitis by inhibiting the biofilm and regulating the microbial ecosystem to healthier conditions.

TGF-β activity in acid bone lysate adsorbs to titanium surface

Objectives

Osteoblasts lay down new bone on implant surfaces. The underlying cellular mechanism and the spatio‐temporal mode of action, however, remain unclear. It can be proposed that growth factors released upon acidification by osteoclasts adsorb to the implant surface and control the early stages of osseointegration.

Methods

To simulate bone lysis by osteoclasts, titanium discs were exposed to acid bone lysate (ABL) followed by vigorous washing and seeding of oral fibroblasts. The expression of TGF‐β target genes interleukin 11 (IL11) and NADPH oxidase 4 (NOX4) was evaluated by reverse transcriptase polymerase chain reaction and IL11 ELISA. TGF‐β signaling activation was assessed via Smad2/3 immunofluorescence. The impact of ABL on osteogenic differentiation was determined with murine ST2 mesenchymal stromal cells.

Results

We report here that ABL‐conditioned titanium discs, independent of turned or rough surface, increased the expression of IL11 and NOX4. This increase was blocked by the TGF‐β receptor 1 antagonist SB431542. Further support for the TGF‐β signaling activation came from the translocation of Smad2/3 into the nucleus of oral fibroblasts. Moreover, titanium discs exposed to ABL decreased alkaline phosphatase and osteopontin in ST2 cells.

Conclusions

These in vitro findings suggest that titanium can adsorb TGF‐β from ABLs. The data provide a strong impetus for studies on the protein adsorption on implant surfaces in vitro and in vivo, specifically for growth factors including bone‐derived TGF‐β during successful and failed osseointegration.

RhBMP-2 and concomitant rapid material degradation synergistically promote bone repair and regeneration with collagen-hydroxyapatite nanocomposites

The effective treatment of bone defects is still a great challenge in clinical practice. Synthetic bone-grafting substitutes of composition and structure analogous to bone as well as incorporated with growth factors are considered to be a promising solution. In this study, a collagen-hydroxyapatite (CHA) nanocomposite scaffold was developed by collagen self-assembly with simultaneous HA synthesis. The physicochemical properties such as morphology, inorganic phase, thermal decomposition, specific surface area and pore size distribution were characterized. The osteogenicity of CHA in the absence or presence of recombinant human bone morphogenetic protein-2 (rhBMP-2) was assessed both by cell culturing and animal implantation experiments. The gene expression results showed that the osteogenic differentiation capacity of rat bone mesenchymal stem cells (rBMSCs) has been enhanced both by CHA and rhBMP-2. The efficient bone regeneration of femoral defects in rabbits was achieved with CHA and CHA pre-absorbed rhBMP-2 (CHA/B), confirmed by micro-computed tomography measurements, histological observation and immunohistochemical analyses. The CHA nanocomposite was completely degraded within 8 weeks and replaced by new bone. It was found that rhBMP-2 not only accelerated and enhanced bone formation, but also expedited the degradation of CHA. It is believed that the rhBMP-2 and concomitant rapid material degradation synergistically promote bone repair and regeneration with CHA. The biodegradation behavior of CHA in the presence of rhBMP-2 can be further investigated to gain an in-depth understanding of the complex interplays among biomaterials, growth factors and their target cells. The relevant knowledge will facilitate the search for a reasonable, safe and efficient methodology for the introduction of growth factors to biomaterials so as to achieve satisfactory tissue regeneration.

Ectopic osteogenesis effect of antigen-extracted xenogeneic cancellous bone graft with chitosan/rhBMP-2/bFGF sequential sustained-release nanocapsules

To explore the ectopic osteogenesis effect of sequential sustained release application of recombinant human bone morphogenic protein-2 (rhBMP-2) and basic fibroblast growth factor (bFGF). Antigen-extracted xenogeneic cancellous bone coupled with growth factor-loaded chitosan nanocapsules were implanted in rats in intramuscular site in accordance with the following experimental pattern: group A: simultaneous burst release of rhBMP-2 and bFGF; group B: simultaneous sustained release of rhBMP-2 and bFGF; group C: preferential burst release of rhBMP-2, then sustained release of bFGF; group D: preferential burst release of bFGF, then sustained release of rhBMP-2; group E: sustained release of rhBMP-2 alone; group F: sustained release of bFGF alone, blank control group G: antigen-extracted xenogeneic cancellous bone graft only; negative control group H: not filled with anything. Specimens were obtained after executing the animals at 2 and 4 weeks for general observation and weighing, calcium content detection, micro-CT scanning and bone parameter measurement analysis, H&E staining, ALP staining and CD34 staining. The materials weight of A-2, B-2, C-2, A-4, B-4, C-4, D-4 and E-4 were significantly higher than that of preoperative materials ( P < 0.05). The concentration of calcium of group B-4 was the highest (414.7 ± 12.03 mg/dl). Micro-CT scanning and bone parameter measurement analysis showed that the values of bone mineral density and trabecular thickness of group A, B, D, E at 4 weeks were both higher than the ones at 2 weeks ( P < 0.05), and both the bone mineral density (367.52 ± 11.64 mg/cc) and the trabecular thickness (126.17 ± 11.36 μm) of group B-4 were the highest. H&E staining showed that a large region of calcified cartilage and haemopoietic tissues were newly formed, especially in group B-4. ALP staining and CD34 staining showed the most positive expression region in group B-4. Therefore, we conclude that simultaneous sustained release of rhBMP-2 and bFGF is the ideal way to release drug, and has better inducement of antigen-extracted xenogeneic cancellous bone graft.

Antimicrobial and Osseointegration Properties of Nanostructured Titanium Orthopaedic Implants

The surface design of titanium implants influences not only the local biological reactions but also affects at least the clinical result in orthopaedic application. During the last decades, strong efforts have been made to improve osteointegration and prevent bacterial adhesion to these surfaces. Following the rule of “smaller, faster, cheaper”, nanotechnology has encountered clinical application. It is evident that the hierarchical implant surface micro- and nanotopography orchestrate the biological cascades of early peri-implant endosseous healing or implant loosening. This review of the literature gives a brief overview of nanostructured titanium-base biomaterials designed to improve osteointegration and prevent from bacterial infection.

Comparison of the osteogenic capability of rat bone mesenchymal stem cells on collagen, collagen/hydroxyapatite, hydroxyapatite and biphasic calcium phosphate

Collagen (COL), collagen/hydroxyapatite (COL/HA), HA and biphasic calcium phosphate were prepared as representative bone grafting materials with composition analogous to bone, and their structural characteristics were analyzed. The rat bone mesenchymal stem cells (BMSCs) were further seeded onto four groups of materials, and BMSCs grown in basic medium and standard osteogenic medium were set as controls of a reference model to show the basic and osteogenic behavior of cells without the intervention of materials. Cellular behaviors were characterized, including proliferation, spreading morphology and expression of osteogenesis factors. The rat BMSCs proliferated properly with time on four groups of materials as well on two groups of controls, and typical cuboidal, polygonal and extremely-elongated morphologies of cells were observed. According to the real-time polymerase chain reaction data, a higher osteogenic gene expression level was dependent upon the growing morphology but not the proliferation rate of cells, and the osteogenic differentiation capacity of cells onto four groups of materials varied in specific genes. In general, BMSCs exhibited the highest osteogenic capacity onto COL/HA, but the poorest onto HA. The growing behaviors of cells on materials were further discussed in comparison with the cases of OC and BC of the reference model. The present attempt to comparatively analyze cell experimental data with a reference model is expected to be useful for revealing the difference in the osteogenic capability of MSCs onto materials or even the bioactivity of materials.

Bone Morphogenetic Protein Coating on Titanium Implant Surface: a Systematic Review

Objectives

The purpose of the study is to systematically review the osseointegration process improvement by bone morphogenetic protein coating on titanium implant surface.

Material and Methods

An electronic literature search was conducted through the MEDLINE (PubMed) and EMBASE databases. The search was restricted for articles published during the last 10 years from October 2006 to September 2016 and articles were limited to English language.

Results

A total of 41 articles were reviewed, and 8 of the most relevant articles that are suitable to the criteria were selected. Articles were analysed regarding concentration of bone morphogenetic protein (BMP), delivery systems, adverse reactions and the influence of the BMP on the bone and peri-implant surface in vivo. Finally, the present data included 340 implants and 236 models.

Conclusions

It’s clearly shown from most of the examined studies that bone morphogenetic protein increases bone regeneration. Further studies should be done in order to induce and sustain bone formation activity. Osteogenic agent should be gradually liberated and not rapidly released with priority to three-dimension reservoir (incorporated) titanium implant surface in order to avoid following severe side effects: inflammation, bleeding, haematoma, oedema, erythema, and graft failure.

Synergistic effects of fibronectin and bone morphogenetic protein on the bioactivity of titanium metal

To improve the biological properties of bioactive titanium metal, recombinant human bone morphogenetic protein 2(rhBMP-2) and fibronectin (Fn) were adsorbed on its surface solely or contiguously to modify the anodic oxidized titanium (AO-Ti), acid-alkali-treated titanium (AA-Ti), and polished titanium (P-Ti). It is found that the different bioactive titanium surface structures had great influence on protein adsorption. The adsorption amounts of BMP adsorbed solely and Fn/BMP adsorbed contiguously were AA-Ti > P-Ti > AO-Ti, and that for Fn adsorbed solely was AA-Ti ≈ P-Ti > AO-Ti. The conformation of proteins was changed remarkably after the adsorption. For BMP, the α-helix decreased on AA-Ti and stabilized on P-Ti and AO-Ti. For Fn, the β-sheet on PT-Ti and AA-Ti increased significantly. For Fn/BMP, the percentage of β-sheet on AA-Ti increased, and that of α-helix on all samples was stable. MSCs showed greater adhesion and spreading on Fn/BMP groups. MTT and Elisa tests showed that the synergistic effects of proteins made the cells proliferate and differentiate faster. It indicated both the surface structure and the synergistic effects of proteins could influence the biological properties of titanium metals. It provides research foundation for improving the biological properties of bioactive titanium metals by simultaneous application of several proteins. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2485-2498, 2017.

Bio-functionalization of biomedical metals

Bio-functionalization means to endow biomaterials with bio-functions so as to make the materials or devices more suitable for biomedical applications. Traditionally, because of the excellent mechanical properties, the biomedical metals have been widely used in clinic. However, the utilized functions are basically supporting or fixation especially for the implantable devices. Nowadays, some new functions, including bioactivity, anti-tumor, anti-microbial, and so on, are introduced to biomedical metals. To realize those bio-functions on the metallic biomedical materials, surface modification is the most commonly used method. Surface modification, including physical and chemical methods, is an effective way to alter the surface morphology and composition of biomaterials. It can endow the biomedical metals with new surface properties while still retain the good mechanical properties of the bulk material. Having analyzed the ways of realizing the bio-functionalization, this article briefly summarized the bio-functionalization concepts of six hot spots in this field. They are bioactivity, bony tissue inducing, anti-microbial, anti-tumor, anticoagulation, and drug loading functions.