1
|
Petla RK, Lindsey I, Li J, Meng X. Interface Modifications of Lithium Metal Anode for Lithium Metal Batteries. ChemSusChem 2024:e202400281. [PMID: 38573033 DOI: 10.1002/cssc.202400281] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/08/2024] [Revised: 03/28/2024] [Accepted: 04/04/2024] [Indexed: 04/05/2024]
Abstract
Lithium metal batteries (LMBs) enable much higher energy density than lithium-ion batteries (LIBs) and thus hold great promise for future transportation electrification. However, the adoption of lithium metal (Li) as an anode poses serious concerns about cell safety and performance, which has been hindering LMBs from commercialization. To this end, extensive effort has been invested in understanding the underlying mechanisms theoretically and experimentally and developing technical solutions. In this review, we devote to providing a comprehensive review of the challenges, characterizations, and interfacial engineering of Li anodes in both liquid and solid LMBs. We expect that this work will stimulate new efforts and help peer researchers find new solutions for the commercialization of LMBs.
Collapse
Affiliation(s)
- Ramesh Kumar Petla
- Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701, USA
| | - Ian Lindsey
- Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701, USA
| | - Jianlin Li
- Applied Materials Division, Argonne National Laboratory, Lemont, IL 60439, USA
| | - Xiangbo Meng
- Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701, USA
| |
Collapse
|
2
|
Santoso LL, Prakoso SP, Bui HK, Hong QA, Huang SY, Chiang TC, Huang KY, Nurkhamidah S, Tristantini D, Chiu YC. A Green High-k Dielectric from Modified Carboxymethyl Cellulose-Based with Dextrin. Macromol Rapid Commun 2024:e2400059. [PMID: 38538294 DOI: 10.1002/marc.202400059] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2024] [Revised: 03/01/2024] [Indexed: 04/06/2024]
Abstract
Many crucial components inside electronic devices are made from non-renewable, non-biodegradable, and potentially toxic materials, leading to environmental damage. Finding alternative green dielectric materials is mandatory to align with global sustainable goals. Carboxymethyl cellulose (CMC) is a bio-polymer derived from cellulose and has outstanding properties. Herein, citric acid, dextrin, and CMC based hydrogels are prepared, which are biocompatible and biodegradable and exhibit rubber-like mechanical properties, with Young modulus values of 0.89 MPa. Hence, thin film CMC-based hydrogel is explored as a suitable green high-k dielectric candidate for operation at low voltages, demonstrating a high dielectric constant of up to 78. These fabricated transistors reveal stable high capacitance (2090 nF cm-2) for ≈±3 V operation. Using a polyelectrolyte-type approach and poly-(2-vinyl anthracene) (PVAn) surface modification, this study demonstrates a thin dielectric layer (d ≈30 nm) with a small voltage threshold (Vth ≈-0.8 V), moderate transconductance (gm ≈65 nS), and high ON-OFF ratio (≈105). Furthermore, the dielectric layer exhibits stable performance under bias stress of ± 3.5 V and 100 cycles of switching tests. The modified CMC-based hydrogel demonstrates desirable performance as a green dielectric for low-voltage operation, further highlighting its biocompatibility.
Collapse
Affiliation(s)
- Leon Lukhas Santoso
- Department of Chemical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei, 10607, Taiwan
- Advanced Research Center for Green Materials Science and Technology, National Taiwan University, Taipei, 10617, Taiwan
- Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI, Depok, 16424, Indonesia
| | - Suhendro Purbo Prakoso
- Department of Chemical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei, 10607, Taiwan
| | - Hai-Khue Bui
- Department of Chemical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei, 10607, Taiwan
| | - Qi-An Hong
- Department of Chemical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei, 10607, Taiwan
| | - Ssu-Yu Huang
- Industrial Technology Research Institute, Hsinchu, Taiwan
| | - Tai-Chin Chiang
- The Second Research Division, Chung-Hua Institution for Economic Research, Taipei, 10672, Taiwan
- School of Engineering, Tokyo Institute of Technology, Tokyo, 152-8550, Japan
| | - Kuan-Yeh Huang
- Industrial Technology Research Institute, Hsinchu, Taiwan
| | - Siti Nurkhamidah
- Chemical Engineering Department, Institut Teknologi Sepuluh Nopember (ITS), Kampus ITS Sukolilo, Surabaya, 60111, Indonesia
| | - Dewi Tristantini
- Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI, Depok, 16424, Indonesia
| | - Yu-Cheng Chiu
- Department of Chemical Engineering, National Taiwan University of Science and Technology, No. 43, Sec. 4, Keelung Rd., Da'an Dist., Taipei, 10607, Taiwan
- Advanced Research Center for Green Materials Science and Technology, National Taiwan University, Taipei, 10617, Taiwan
| |
Collapse
|
3
|
Uysal I, Tezcaner A, Evis Z. Methods to improve antibacterial properties of PEEK: A review. Biomed Mater 2024; 19:022004. [PMID: 38364280 DOI: 10.1088/1748-605x/ad2a3d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/24/2023] [Accepted: 02/16/2024] [Indexed: 02/18/2024]
Abstract
As a thermoplastic and bioinert polymer, polyether ether ketone (PEEK) serves as spine implants, femoral stems, cranial implants, and joint arthroplasty implants due to its mechanical properties resembling the cortical bone, chemical stability, and radiolucency. Although there are standards and antibiotic treatments for infection control during and after surgery, the infection risk is lowered but can not be eliminated. The antibacterial properties of PEEK implants should be improved to provide better infection control. This review includes the strategies for enhancing the antibacterial properties of PEEK in four categories: immobilization of functional materials and functional groups, forming nanocomposites, changing surface topography, and coating with antibacterial material. The measuring methods of antibacterial properties of the current studies of PEEK are explained in detail under quantitative, qualitative, andin vivomethods. The mechanisms of bacterial inhibition by reactive oxygen species generation, contact killing, trap killing, and limited bacterial adhesion on hydrophobic surfaces are explained with corresponding antibacterial compounds or techniques. The prospective analysis of the current studies is done, and dual systems combining osteogenic and antibacterial agents immobilized on the surface of PEEK are found the promising solution for a better implant design.
Collapse
Affiliation(s)
- Idil Uysal
- Department of Biomedical Engineering, Middle East Technical University, 06800 Ankara, Turkey
| | - Ayşen Tezcaner
- Department of Biomedical Engineering, Middle East Technical University, 06800 Ankara, Turkey
- Department of Engineering Sciences, Middle East Technical University, 06800 Ankara, Turkey
| | - Zafer Evis
- Department of Biomedical Engineering, Middle East Technical University, 06800 Ankara, Turkey
- Department of Engineering Sciences, Middle East Technical University, 06800 Ankara, Turkey
| |
Collapse
|
4
|
Cao X, Feng N, Huang Q, Liu Y. Nanoscale Metal-Organic Frameworks and Nanoscale Coordination Polymers: From Synthesis to Cancer Therapy and Biomedical Imaging. ACS Appl Bio Mater 2024. [PMID: 38382060 DOI: 10.1021/acsabm.3c01300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/23/2024]
Abstract
Recently, there has been significant interest in nanoscale metal-organic frameworks (NMOFs) characterized by ordered crystal structures and nanoscale coordination polymers (NCPs) featuring amorphous structures. These structures arise from the coordination interactions between inorganic metal ions or clusters and organic ligands. Their advantages, such as the ability to tailor composition and structure, efficiently encapsulate diverse therapeutic or imaging agents within porous frameworks, inherent biodegradability, and surface functionalization capability, position them as promising carriers in the biomedical fields. This review provides an overview of the synthesis and surface modification strategies employed for NMOFs and NCPs, along with their applications in cancer treatment and biological imaging. Finally, future directions and challenges associated with the utilization of NMOFs and NCPs in cancer treatment and diagnosis are also discussed.
Collapse
Affiliation(s)
- Xianghui Cao
- State Key Laboratory of Medicinal Chemical Biology, Key Laboratory of Functional Polymer Materials of Ministry of Education, College of Chemistry, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin 300071, China
| | - Nana Feng
- State Key Laboratory of Medicinal Chemical Biology, Key Laboratory of Functional Polymer Materials of Ministry of Education, College of Chemistry, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin 300071, China
| | - Qingqing Huang
- State Key Laboratory of Medicinal Chemical Biology, Key Laboratory of Functional Polymer Materials of Ministry of Education, College of Chemistry, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin 300071, China
| | - Yang Liu
- State Key Laboratory of Medicinal Chemical Biology, Key Laboratory of Functional Polymer Materials of Ministry of Education, College of Chemistry, Frontiers Science Center for New Organic Matter, Nankai University, Tianjin 300071, China
| |
Collapse
|
5
|
Major GS, Doan VK, Longoni A, Bilek MMM, Wise SG, Rnjak-Kovacina J, Yeo GC, Lim KS. Mapping the microcarrier design pathway to modernise clinical mesenchymal stromal cell expansion. Trends Biotechnol 2024:S0167-7799(24)00001-5. [PMID: 38320911 DOI: 10.1016/j.tibtech.2024.01.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2023] [Revised: 01/08/2024] [Accepted: 01/08/2024] [Indexed: 02/08/2024]
Abstract
Microcarrier expansion systems show exciting potential to revolutionise mesenchymal stromal cell (MSC)-based clinical therapies by providing an opportunity for economical large-scale expansion of donor- and patient-derived cells. The poor reproducibility and efficiency of cell expansion on commercial polystyrene microcarriers have driven the development of novel microcarriers with tuneable physical, mechanical, and cell-instructive properties. These new microcarriers show innovation toward improving cell expansion outcomes, although their limited biological characterisation and compatibility with dynamic culture systems suggest the need to realign the microcarrier design pathway. Clear headway has been made toward developing infrastructure necessary for scaling up these technologies; however, key challenges remain in characterising the wholistic effects of microcarrier properties on the biological fate and function of expanded MSCs.
Collapse
Affiliation(s)
- Gretel S Major
- School of Medical Sciences, University of Sydney, Sydney, Australia
| | - Vinh K Doan
- School of Medical Sciences, University of Sydney, Sydney, Australia
| | - Alessia Longoni
- Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands
| | - Marcela M M Bilek
- School of Biomedical Engineering, University of Sydney, Sydney, Australia; School of Physics, University of Sydney, Sydney, Australia; Charles Perkins Centre, University of Sydney, Sydney, Australia; Sydney Nano Institute, University of Sydney, Sydney, Australia
| | - Steven G Wise
- School of Medical Sciences, University of Sydney, Sydney, Australia; Charles Perkins Centre, University of Sydney, Sydney, Australia
| | - Jelena Rnjak-Kovacina
- Graduate School of Biomedical Engineering, University of New South Wales, Sydney, Australia; Tyree Institute of Health Engineering, University of New South Wales, Sydney, Australia
| | - Giselle C Yeo
- Charles Perkins Centre, University of Sydney, Sydney, Australia; School of Life and Environmental Sciences, University of Sydney, Sydney, Australia.
| | - Khoon S Lim
- School of Medical Sciences, University of Sydney, Sydney, Australia; Charles Perkins Centre, University of Sydney, Sydney, Australia; Sydney Nano Institute, University of Sydney, Sydney, Australia.
| |
Collapse
|
6
|
Agrawal PR, Chandak M, Nikhade PP, Patel AS, Bhopatkar JK. Revolutionizing endodontics: Advancements in nickel-titanium instrument surfaces. J Conserv Dent Endod 2024; 27:126-133. [PMID: 38463467 PMCID: PMC10923218 DOI: 10.4103/jcde.jcde_248_23] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/28/2023] [Revised: 11/19/2023] [Accepted: 12/05/2023] [Indexed: 03/12/2024]
Abstract
Nickel-titanium (NiTi) instruments have become the backbone of endodontics due to their exceptional properties, superelasticity, and shape memory. However, challenges such as unexpected breakage, poor cutting efficiency, and corrosion have prompted researchers to explore innovative surface modifications to enhance their performance. This comprehensive review discusses the latest advancements in NiTi metallurgy and their impact on rotary NiTi file systems. Various surface treatment techniques, including ion implantation, cryogenic treatment (CT), thermal nitridation, electropolishing, and physical or chemical vapor deposition, have been investigated to minimize defects, boost surface hardness, and improve cyclic fatigue resistance. Ion implantation has shown promise by increasing wear resistance and cutting efficiency through nitrogen ion incorporation. Thermal nitridation has successfully formed titanium nitride (TiN) coatings, resulting in improved corrosion resistance and cutting efficiency. CT has demonstrated increased cutting efficiency and overall strength by creating a martensite transformation and finer carbide particles. Electropolishing has yielded mixed results, providing smoother surfaces but varying impacts on fatigue resistance. Physical or chemical vapor deposition has proven effective in forming TiN coatings, enhancing hardness and wear resistance. Furthermore, the concept of surface functionalization with silver ions for antibacterial properties has been explored. These advancements present an exciting future for endodontic procedures, offering the potential for enhanced NiTi instruments with improved performance, durability, and patient outcomes.
Collapse
Affiliation(s)
- Paridhi Rajesh Agrawal
- Department of Conservative Dentistry and Endodontics, DMIHER, Sharad Pawar Dental College and Hospital, Wardha, Maharashtra, India
| | - Manoj Chandak
- Department of Conservative Dentistry and Endodontics, DMIHER, Sharad Pawar Dental College and Hospital, Wardha, Maharashtra, India
| | - Pradnya Prashant Nikhade
- Department of Conservative Dentistry and Endodontics, DMIHER, Sharad Pawar Dental College and Hospital, Wardha, Maharashtra, India
| | - Aditya Satyawansingh Patel
- Department of Conservative Dentistry and Endodontics, DMIHER, Sharad Pawar Dental College and Hospital, Wardha, Maharashtra, India
| | - Jay Kailas Bhopatkar
- Department of Conservative Dentistry and Endodontics, DMIHER, Sharad Pawar Dental College and Hospital, Wardha, Maharashtra, India
| |
Collapse
|
7
|
K S K, Sreevidya B, T K R, Bm D, Dedeepya NR, Kamal Badiyani B, Kumar A. Comparative Analysis of Surface Modification Techniques for Assessing Oral Implant Osseointegration: An Animal Study. Cureus 2024; 16:e54014. [PMID: 38476793 PMCID: PMC10928455 DOI: 10.7759/cureus.54014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/16/2023] [Accepted: 02/11/2024] [Indexed: 03/14/2024] Open
Abstract
BACKGROUND Effective implant placement depends critically on the implant's level of osseointegration with the alveolar bone. To increase osseointegration during implant placement, research has concentrated on the surface modification of implants, and morphological analyses have looked at the thread pattern in close interaction with the bone's surface. AIM This study aimed to assess and compare the extent of oral implant osseointegration in different surface modification techniques. MATERIALS AND METHODS In this study, 12 healthy adult dogs aged 18-24 months were used. Tooth extractions were performed on both sides of the mandible, and wounds were closed with sutures. Two months later, the right mandible of each dog underwent local anesthesia and general anesthesia. Four different implant types were placed based on their surface treatments: resorbable blast media (RBM)-treated implants, hydroxyapatite (HA) implants with an ultra-thin HA film, hydrothermal-treated HA implants coated with HA, and sandblasting combined acid etching (SLA) implants treated with plasma spray and acid etching. A total of 48 implants were divided into two- and four-week groups, with identical dimensions. Each dog received two implants from each group, for a total of eight implants per dog. The implants were securely placed into the superior alveolar bone with a torque greater than 35-N up to a depth of 1 mm. Periotest M (Medizintechnik Gulden e.K., Modautal, Germany) was used to calculate the periotest value (PTV) as a typical value on the buccal side of each implant immediately following placement and sacrifice to test the main fixation and stability of the implants. Resonance frequency analysis (RFA) was utilised by Osstell Mentor (Osstell AB, Gothenburg, Sweden) to simultaneously assess the implant stability quotient (ISQ) on the medial, distal, buccal, and lingual sides of the implant. The rotational torque in one of the sacrificed dogs was calculated using the MGT 50 (ELECTROMATIC Equipment Co., Inc., New York, USA) torque analyzer. The histomorphometric evaluation was performed using an optical microscope (Olympus Corporation, Tokyo, Japan). The upper half's bone-implant contact (BIC), which was found to be more important for implant stability, was studied together with the ratio of the new bone formation area (NBFA) to the complete implant. RESULTS The maximum stability was observed in HA-treated implants in the fourth week. The minimum stability was observed in hydrothermal-treated HA implants in the fourth week. The stability in each group was greater in the four-week evaluation as compared to the two-week evaluation. The stability was satisfactory in almost all implants at two- and three-week evaluations. The maximum value of the percentage area of newly formed bone at the two- and four-week evaluations was observed in HA-treated implants. The minimum value of the percentage of the area of newly formed bone at two- and four-week evaluations was observed in SLA and RBM-treated implants respectively. The difference was significant statistically (p ≤ 0.05). CONCLUSION All implant surface modifications, in general, produced satisfactory osseointegration. Excellent osseointegration was seen in the upper portion of the implant with hydrothermally treated HA.
Collapse
Affiliation(s)
- Karthik K S
- Department of Prosthodontics and Implantology, KGF (Kolar Gold Fields) College of Dental Sciences, Kolar, IND
| | - B Sreevidya
- Department of Oral and Maxillofacial Surgery, KGF (Kolar Gold Fields) College of Dental Sciences, Kolar, IND
| | - Ramya T K
- Department of Oral Medicine and Radiology, KGF (Kolar Gold Fields) College of Dental Sciences, Kolar, IND
| | - Divya Bm
- Department of Public Health Dentistry, D. A. Pandu Memorial RV (Rashtreeya Vidyalaya) Dental College, Bangalore, IND
| | - N R Dedeepya
- Department of Prosthodontics and Implantology, KGF (Kolar Gold Fields) College of Dental Sciences, Kolar, IND
| | - Bhumika Kamal Badiyani
- Department of Public Health Dentistry, Interdental Multispeciality Dental Clinic, Mumbai, IND
| | - Amit Kumar
- Department of Public Health Dentistry, Interdental Multispeciality Dental Clinic, Mumbai, IND
| |
Collapse
|
8
|
Akram B, Ali M, Liu Q. Polyoxometalate Induced Assembly Into Surface Functionalized Multidimensional Heterostructures with Enhanced Catalytic Activity. Small Methods 2024:e2301432. [PMID: 38213012 DOI: 10.1002/smtd.202301432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/18/2023] [Revised: 12/29/2023] [Indexed: 01/13/2024]
Abstract
The self-assembly of inorganic nanocrystals offers an efficient way for the fabrication of functional materials. However, it is still challenging for the construction of multidimensional nanostructures with controllable shapes, compositions and functions. Here, a series of heterostructures in different dimensions by surface modification of polyoxometalate (POM) clusters is developed. Three kinds of POM clusters (phosphomolybdic acid (PMA), phosphotungstic acid (PTA) and silicotungstic acid (STA) and five kinds of metal oxides (TiO2 , VOx , La2 O3 , In2 O3 and Gd2 O3 ) can be used as building blocks, and a class of 1D, 2D and 3D heterostructures can be achieved by the control of surface ligand coverage. Compared with individual building blocks and other cluster-based superstructures, TiO2 -PMA superstructures exhibit enhanced catalytic activity toward thioether oxidations, which is attributed to the electron transfer between TiO2 and POM clusters.
Collapse
Affiliation(s)
- Bilal Akram
- Department of Chemistry, Women University of Azad Jammu and Kashmir, AJ&K, Bagh, 12500, Pakistan
- Engineering Research Center of Advanced Rare Earth Materials, Department of Chemistry, Tsinghua University, Beijing, 100084, China
| | - Mudussar Ali
- Engineering Research Center of Advanced Rare Earth Materials, Department of Chemistry, Tsinghua University, Beijing, 100084, China
| | - Qingda Liu
- Engineering Research Center of Advanced Rare Earth Materials, Department of Chemistry, Tsinghua University, Beijing, 100084, China
| |
Collapse
|
9
|
Abdulghafor MA, Mahmood MK, Tassery H, Tardivo D, Falguiere A, Lan R. Biomimetic Coatings in Implant Dentistry: A Quick Update. J Funct Biomater 2023; 15:15. [PMID: 38248682 PMCID: PMC10816551 DOI: 10.3390/jfb15010015] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2023] [Revised: 12/20/2023] [Accepted: 12/25/2023] [Indexed: 01/23/2024] Open
Abstract
Biomimetic dental implants are regarded as one of the recent clinical advancements in implant surface modification. Coatings with varying thicknesses and roughness may affect the dental implant surface's chemical inertness, cell adhesion, and antibacterial characteristics. Different surface coatings and mechanical surface changes have been studied to improve osseointegration and decrease peri-implantitis. The surface medication increases surface energy, leading to enhanced cell proliferation and growth factors, and, consequently, to a rise in the osseointegration process. This review provides a comprehensive update on the numerous biomimetic coatings used to improve the surface characteristics of dental implants and their applications in two main categories: coating to improve osseointegration, including the hydroxyapatite layer and nanocomposites, growth factors (BMPs, PDGF, FGF), and extracellular matrix (collagen, elastin, fibronectin, chondroitin sulfate, hyaluronan, and other proteoglycans), and coatings for anti-bacterial performance, covering drug-coated dental implants (antibiotic, statin, and bisphosphonate), antimicrobial peptide coating (GL13K and human beta defensins), polysaccharide antibacterial coatings (natural chitosan and its coupling agents) and metal elements (silver, zinc, and copper).
Collapse
Affiliation(s)
| | - Mohammed Khalid Mahmood
- Faculty of Dentistry, Aix-Marseille University, CNRS, EFS, ADES, 13284 Marseille, France;
- College of Dentistry, The American University of Iraq, Sulaimani 46001, Kurdistan, Iraq
| | | | - Delphine Tardivo
- Faculty of Dentistry, Aix-Marseille University, CNRS, EFS, ADES, 13284 Marseille, France;
| | - Arthur Falguiere
- Oral Surgery Department, Timone Hospital, Aix-Marseille University, APHM, 13284 Marseille, France
| | - Romain Lan
- Oral Surgery Department, Timone Hospital, Aix-Marseille University, APHM, CNRS, EFS, ADES, 13284 Marseille, France;
| |
Collapse
|
10
|
Antoniac I, Manescu (Paltanea) V, Antoniac A, Paltanea G. Magnesium-based alloys with adapted interfaces for bone implants and tissue engineering. Regen Biomater 2023; 10:rbad095. [PMID: 38020233 PMCID: PMC10664085 DOI: 10.1093/rb/rbad095] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2023] [Revised: 10/03/2023] [Accepted: 10/22/2023] [Indexed: 12/01/2023] Open
Abstract
Magnesium and its alloys are one of the most used materials for bone implants and tissue engineering. They are characterized by numerous advantages such as biodegradability, high biocompatibility and mechanical properties with values close to the human bone. Unfortunately, the implant surface must be adequately tuned, or Mg-based alloys must be alloyed with other chemical elements due to their increased corrosion effect in physiological media. This article reviews the clinical challenges related to bone repair and regeneration, classifying bone defects and presenting some of the most used and modern therapies for bone injuries, such as Ilizarov or Masquelet techniques or stem cell treatments. The implant interface challenges are related to new bone formation and fracture healing, implant degradation and hydrogen release. A detailed analysis of mechanical properties during implant degradation is extensively described based on different literature studies that included in vitro and in vivo tests correlated with material properties' characterization. Mg-based trauma implants such as plates and screws, intramedullary nails, Herbert screws, spine cages, rings for joint treatment and regenerative scaffolds are presented, taking into consideration their manufacturing technology, the implant geometrical dimensions and shape, the type of in vivo or in vitro studies and fracture localization. Modern technologies that modify or adapt the Mg-based implant interfaces are described by presenting the main surface microstructural modifications, physical deposition and chemical conversion coatings. The last part of the article provides some recommendations from a translational perspective, identifies the challenges associated with Mg-based implants and presents some future opportunities. This review outlines the available literature on trauma and regenerative bone implants and describes the main techniques used to control the alloy corrosion rate and the cellular environment of the implant.
Collapse
Affiliation(s)
- Iulian Antoniac
- Faculty of Material Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania
- Academy of Romanian Scientists, 050094 Bucharest, Romania
| | - Veronica Manescu (Paltanea)
- Faculty of Material Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania
- Faculty of Electrical Engineering, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania
| | - Aurora Antoniac
- Faculty of Material Science and Engineering, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania
| | - Gheorghe Paltanea
- Faculty of Electrical Engineering, National University of Science and Technology POLITEHNICA Bucharest, 060042 Bucharest, Romania
| |
Collapse
|
11
|
Li J, Zhang Z, Qin C, Jiang Y, Han X, Xia Y, Sui M, Yan P. Thermal-Induced Dopant Precipitation Enabling High-Quality Surface Modification of LiCoO 2. Small 2023; 19:e2303474. [PMID: 37329197 DOI: 10.1002/smll.202303474] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/25/2023] [Revised: 06/05/2023] [Indexed: 06/18/2023]
Abstract
Surface modification is an effective approach for overcoming the interfacial degradations to enable high electrochemical performance of battery materials, yet it is still challenging to realize high-quality surface modification with simple processing, low cost, and mass production. Herein, a thermal-induced surface precipitation phenomenon is reported in a Ti-dopped LiCoO2 , which can realize an ultrathin (≈5 nm) and uniform surface modification by a simple annealing process. It is revealed that surface Li-deficiency enables bulk Ti to precipitate and segregate on the non-(003) surface facets, forming a Ti-enriched disordered layered structure. Such a surface modification layer can not only stabilize the interfacial chemistry but also significantly improve the charge/discharge reaction kinetics, leading to much-improved cycling stability and rate capability. Dopants surface precipitation is a unique outward diffusion process, which differs from the current surface modification techniques and further diversifies these approaches for realizing high-quality surface modification of battery materials.
Collapse
Affiliation(s)
- Jinhui Li
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Zhengfeng Zhang
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Changdong Qin
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Yuyuan Jiang
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Xiao Han
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Yueming Xia
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Manling Sui
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| | - Pengfei Yan
- Beijing Key Laboratory of Microstructure and Property of Solids, Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing, 100124, China
| |
Collapse
|
12
|
Ma T, Wang CX, Ge XY, Zhang Y. Applications of Polydopamine in Implant Surface Modification. Macromol Biosci 2023; 23:e2300067. [PMID: 37229654 DOI: 10.1002/mabi.202300067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2023] [Revised: 04/22/2023] [Indexed: 05/27/2023]
Abstract
There is great clinical demand for orthopedic and dental implant surface modification methods to prevent osseointegration failure and improve implant biological functions. Notably, dopamine (DA) can be polymerized to form polydopamine (PDA), which is similar to the adhesive proteins secreted by mussels, to form a stable bond between the bone surface and implants. Therefore, PDA has the potential to be used as an implant surface modification material with good hydrophilicity, roughness, morphology, mechanical strength, biocompatibility, antibacterial activity, cellular adhesion, and osteogenesis. In addition, PDA degradation releases DA into the surrounding microenvironment, which is found to play an important role in regulating DA receptors on both osteoblasts and osteoclasts during the bone remodeling process. Furthermore, the adhesion properties of PDA suggest its use as an intermediate layer in assisting other functional bone remodeling materials, such as nanoparticles, growth factors, peptides, and hydrogels, to form "dual modifications." The purpose of this review is to summarize the recent progress in research on PDA and its derivatives as orthopedic and dental implant surface modification materials and to analyze the multiple functions of PDA.
Collapse
Affiliation(s)
- Ting Ma
- Department of Oral Implantology, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology & Research Center of Engineering and Technology for Computerized Dentistry Ministry of Health & NMPA Key Laboratory for Dental Materials, Beijing, 100081, P. R. China
| | - Chen-Xi Wang
- Department of Oral Implantology, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology & Research Center of Engineering and Technology for Computerized Dentistry Ministry of Health & NMPA Key Laboratory for Dental Materials, Beijing, 100081, P. R. China
| | - Xi-Yuan Ge
- Central Laboratory, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology & Research Center of Engineering and Technology for Computerized Dentistry Ministry of Health & NMPA Key Laboratory for Dental Materials, Beijing, 100081, P. R. China
| | - Yu Zhang
- Department of Oral Implantology, Peking University School and Hospital of Stomatology & National Center of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology & Research Center of Engineering and Technology for Computerized Dentistry Ministry of Health & NMPA Key Laboratory for Dental Materials, Beijing, 100081, P. R. China
| |
Collapse
|
13
|
Rodríguez-Soto MA, Suárez Vargas N, Ayala-Velásquez M, Aragón-Rivera AM, Ostos C, Cruz JC, Muñoz Camargo C, Kim S, D’Amore A, Wagner WR, Briceño JC. Polyester urethane urea (PEUU) functionalization for enhanced anti-thrombotic performance: advancing regenerative cardiovascular devices through innovative surface modifications. Front Bioeng Biotechnol 2023; 11:1257778. [PMID: 37799814 PMCID: PMC10548217 DOI: 10.3389/fbioe.2023.1257778] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2023] [Accepted: 09/05/2023] [Indexed: 10/07/2023] Open
Abstract
Introduction: Thrombogenesis, a major cause of implantable cardiovascular device failure, can be addressed through the use of biodegradable polymers modified with anticoagulating moieties. This study introduces a novel polyester urethane urea (PEUU) functionalized with various anti-platelet deposition molecules for enhanced antiplatelet performance in regenerative cardiovascular devices. Methods: PEUU, synthesized from poly-caprolactone, 1,4-diisocyanatobutane, and putrescine, was chemically oxidized to introduce carboxyl groups, creating PEUU-COOH. This polymer was functionalized in situ with polyethyleneimine, 4-arm polyethylene glycol, seleno-L-cystine, heparin sodium, and fondaparinux. Functionalization was confirmed using Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy. Bio-compatibility and hemocompatibility were validated through metabolic activity and hemolysis assays. The anti-thrombotic activity was assessed using platelet aggregation, lactate dehydrogenase activation assays, and scanning electron microscopy surface imaging. The whole-blood clotting time quantification assay was employed to evaluate anticoagulation properties. Results: Results demonstrated high biocompatibility and hemocompatibility, with the most potent anti-thrombotic activity observed on pegylated surfaces. However, seleno-L-cystine and fondaparinux exhibited no anti-platelet activity. Discussion: The findings highlight the importance of balancing various factors and addressing challenges associated with different approaches when developing innovative surface modifications for cardiovascular devices.
Collapse
Affiliation(s)
| | | | | | | | - Carlos Ostos
- Group CATALAD, Instituto de Química, Universidad de Antioquia, Medellín, Colombia
| | - Juan C. Cruz
- Department of Biomedical Engineering, Universidad de los Andes, Bogotá, Colombia
| | | | - Seungil Kim
- McGowan Institute for Regenerative Medicine and Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA, United States
| | - Antonio D’Amore
- McGowan Institute for Regenerative Medicine and Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA, United States
| | - William R. Wagner
- McGowan Institute for Regenerative Medicine and Department of Bioengineering, University of Pittsburgh, Pittsburgh, PA, United States
| | - Juan C. Briceño
- Department of Biomedical Engineering, Universidad de los Andes, Bogotá, Colombia
- Department of Congenital Heart Disease and Cardiovascular Surgery, Fundación CardioInfantil Instituto de Cardiología, Bogotá, Colombia
| |
Collapse
|
14
|
Lou Y, Sun M, Zhang J, Wang Y, Ma H, Sun Z, Li S, Weng X, Ying B, Liu C, Yu M, Wang H. Ultraviolet Light-Based Micropattern Printing on Titanium Surfaces to Promote Early Osseointegration. Adv Healthc Mater 2023; 12:e2203300. [PMID: 37119120 DOI: 10.1002/adhm.202203300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/19/2022] [Revised: 04/24/2023] [Indexed: 04/30/2023]
Abstract
Patterned interfaces are widely used for surface modification of biomaterials because of a morphological unit similar to that of native tissue. However, engineering fast and cost-effective high-resolution micropatterns directly onto titanium surfaces remains a grand challenge. Herein, a simply designed ultraviolet (UV) light-based micropattern printing to obtain geometrical patterns on implant interfaces is fabricated by utilizing customized photomasks and titanium dioxide (TiO2 ) nanorods as a photo-responsive platform. The technique manipulates the cytoskeleton of micropatterning cells on the surface of TiO2 nanorods. The linear pattern surface shows the elongated morphology and parallel linear arrangements of human mesenchymal stem cells (hMSCs), significantly enhancing their osteogenic differentiation. In addition to the upregulated expression of key osteo-specific function genes in vitro, the accelerated osseointegration between the implant and the host bone is obtained in vivo. Further investigation indicates that the developed linear pattern surface has an outstanding effect on the cytoskeletal system, and finally activates Yes-Associated Protein (YAP)-mediated mechanotransduction pathways, initiating hMSCs osteogenic differentiation. This study not only offers a microfabrication method that can be extended to fabricate various shape- and size-controlled micropatterns on titanium surfaces, but also provides insight into the surface structure design for enhanced bone regeneration.
Collapse
Affiliation(s)
- Yiting Lou
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Mouyuan Sun
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Jingyu Zhang
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Yu Wang
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Haiying Ma
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Zheyuan Sun
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Shengjie Li
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
- Department of Stomatology, The First Affiliated Hospital of Ningbo University, 59 Liuting street, Ningbo, Zhejiang, 315000, China
| | - Xiaoyan Weng
- The Third Affiliated Hospital of Wenzhou Medical University (Ruian People's Hospital), 168 Ruifeng Avenue, Wenzhou, Zhejiang, 325016, China
| | - Binbin Ying
- Department of Stomatology, The First Affiliated Hospital of Ningbo University, 59 Liuting street, Ningbo, Zhejiang, 315000, China
| | - Chao Liu
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Mengfei Yu
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| | - Huiming Wang
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Zhejiang Provincial Clinical Research Center for Oral Diseases, Key Laboratory of Oral Biomedical Research of Zhejiang Province, Cancer Center of Zhejiang University, 395 Yan'an road, Hangzhou, Zhejiang, 310000, China
| |
Collapse
|
15
|
Ihlenburg RBJ, Petracek D, Schrank P, Davari MD, Taubert A, Rothenstein D. Identification of the First Sulfobetaine Hydrogel-Binding Peptides via Phage Display Assay. Macromol Rapid Commun 2023; 44:e2200896. [PMID: 36703485 DOI: 10.1002/marc.202200896] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2022] [Revised: 01/11/2023] [Indexed: 01/28/2023]
Abstract
Using the M13 phage display, a series of 7- and 12-mer peptides which interact with new sulfobetaine hydrogels are identified. Two peptides each from the 7- and 12-mer peptide libraries bind to the new sulfobetaine hydrogels with high affinity compared to the wild-type phage lacking a dedicated hydrogel binding peptide. This is the first report of peptides binding to zwitterionic sulfobetaine hydrogels and the study therefore opens up the pathway toward new phage or peptide/hydrogel hybrids with high application potential.
Collapse
Affiliation(s)
- Ramona B J Ihlenburg
- Institute of Chemistry, University of Potsdam, Karl-Liebknecht-Straße 24-25, D-14476, Potsdam, Germany
| | - David Petracek
- Department Bioinspired Materials, Institute for Materials Science, University of Stuttgart, Heisenbergstraße 3, D-70569, Stuttgart, Germany
| | - Paul Schrank
- Department of Bioorganic Chemistry, Leibniz Institute of Plant Biochemistry, Weinberg 3, D-06120, Halle, Germany
| | - Mehdi D Davari
- Department of Bioorganic Chemistry, Leibniz Institute of Plant Biochemistry, Weinberg 3, D-06120, Halle, Germany
| | - Andreas Taubert
- Institute of Chemistry, University of Potsdam, Karl-Liebknecht-Straße 24-25, D-14476, Potsdam, Germany
| | - Dirk Rothenstein
- Department Bioinspired Materials, Institute for Materials Science, University of Stuttgart, Heisenbergstraße 3, D-70569, Stuttgart, Germany
| |
Collapse
|
16
|
Nishchitha NK, Kumar PS, Goel S. Laser-induced in situsynthesis of nano-composite Co-Co 3O 4-rGO on paper: miniaturized biosensor for alkaline phosphatase detection. Nanotechnology 2023; 34. [PMID: 37129108 DOI: 10.1088/1361-6528/accc36] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/14/2023] [Accepted: 04/12/2023] [Indexed: 05/03/2023]
Abstract
Recent progress in thein situsynthesise of various nanomaterials has gained tremendous interest and wide applications in various fields. For the first time to the best of our knowledge, this work reports a methodology of ultra-fastin situsynthesis of cobalt-cobalt oxide-reduced graphene oxide (Co-Co3O4-rGO (CC-rGO)) composite by laser ablation. The photothermal reduction technique was leveraged to develop the CC-rGO. For this, a low-cost 450 nm blue diode laser was irradiated onto a grade 1 filter paper in the presence of cobalt ions readily patterns the carbon matrix of paper to the composite material. Moreover, the variation of cobalt concentrations from 0.1-0.5 M led to structural and morphological changes. Standard techniques were adopted for thorough characterizations of developed sensor material for conductivity analysis, specific surface area, crystal-structural information, surface morphology, and chemical composition. The observed results were highly promoting towards the electrochemical sensing applications. Further, the developed sensor was found to be highly selective toward detecting a vital bio analyte alkaline phosphatase (ALP). The sensors performance was highly significant in the linear range of 10-800 mU l-1with a detection limit of 10.13 mU l-1. The sensors applicability was further validated in actual human serum samples via a recovery-based approach. In the future, the developedin situmaterial methodology can begin a rapid composite material synthesis at a larger scale.
Collapse
Affiliation(s)
- N K Nishchitha
- MEMS, Microfluidics, and Nanoelectronics Lab (MMNE), Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science (BITS) Pilani, Hyderabad Campus, Hyderabad, 500078, India
| | - Pavar Sai Kumar
- MEMS, Microfluidics, and Nanoelectronics Lab (MMNE), Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science (BITS) Pilani, Hyderabad Campus, Hyderabad, 500078, India
| | - Sanket Goel
- MEMS, Microfluidics, and Nanoelectronics Lab (MMNE), Department of Electrical and Electronics Engineering, Birla Institute of Technology and Science (BITS) Pilani, Hyderabad Campus, Hyderabad, 500078, India
| |
Collapse
|
17
|
Kuroda PAB, Grandini CR, Afonso CRM. Surface Characterization of New β Ti-25Ta-Zr-Nb Alloys Modified by Micro-Arc Oxidation. Materials (Basel) 2023; 16:2352. [PMID: 36984232 PMCID: PMC10059760 DOI: 10.3390/ma16062352] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/16/2023] [Revised: 03/02/2023] [Accepted: 03/09/2023] [Indexed: 06/18/2023]
Abstract
The technique of surface modification using electrolytic oxidation, called micro-arc oxidation (MAO), has been used in altering the surface properties of titanium alloys for biomedical purposes, enhancing their characteristics as an implant (biocompatibility, corrosion, and wear resistance). The layer formed by the micro-arc oxidation process induces the formation of ceramic oxides, which can improve the corrosion resistance of titanium alloys from the elements in the substrate, enabling the incorporation of bioactive components such as calcium, phosphorus, and magnesium. This study aims to modify the surfaces of Ti-25Ta-10Zr-15Nb (TTZN1) and Ti-25Ta-20Zr-30Nb (TTZN2) alloys via micro-arc oxidation incorporating Ca, P, and Mg elements. The chemical composition results indicated that the MAO treatment was effective in incorporating the elements Ca (9.5 ± 0.4 %atm), P (5.7 ± 0.1 %atm), and Mg (1.1 ± 0.1 %atm), as well as the oxidized layer formed by micropores that increases the surface roughness (1160 nm for the MAO layer of TTZN1, 585 nm for the substrate of TTZN1, 1428 nm for the MAO layer of TTZN2, and 661 nm for the substrate of TTZN2). Regarding the phases formed, the films are amorphous, with low crystallinity (4 and 25% for TTZN2 and TTZN1, respectively). Small amounts of anatase, zirconia, and calcium carbonate were detected in the Ti-25Ta-10Zr-15Nb alloy.
Collapse
Affiliation(s)
- Pedro Akira Bazaglia Kuroda
- Materials Engineering Department (DEMa), Universidade Federal de São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
| | - Carlos Roberto Grandini
- Laboratório de Anelasticidade e Biomateriais, UNESP—Universidade Estadual Paulista, Bauru 17033-360, SP, Brazil
| | - Conrado Ramos Moreira Afonso
- Materials Engineering Department (DEMa), Universidade Federal de São Carlos (UFSCar), São Carlos 13565-905, SP, Brazil
| |
Collapse
|
18
|
Jeong SH, Nguyen KT, Nguyen MT, You JS, Kim BH, Choe HC, Ahn SG. DMP1 and IFITM5 Regulate Osteogenic Differentiation of MC3T3-E1 on PEO-Treated Ti-6Al-4V-Ca 2+/P i surface. ACS Biomater Sci Eng 2023; 9:1377-1390. [PMID: 36802481 DOI: 10.1021/acsbiomaterials.2c01296] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/22/2023]
Abstract
Despite numerous studies on various surface modifications on titanium and its alloys, it remains unclear what kind of titanium-based surface modifications are capable of controlling cell activity. This study aimed to understand the mechanism at the cellular and molecular levels and investigate the in vitro response of osteoblastic MC3T3-E1 cultured on the Ti-6Al-4V surface modified by plasma electrolytic oxidation (PEO) treatment. A Ti-6Al-4V surface was prepared by PEO at 180, 280, and 380 V for 3 or 10 min in an electrolyte containing Ca2+/Pi ions. Our results showed that PEO-treated Ti-6Al-4V-Ca2+/Pi surfaces enhanced the cell attachment and differentiation of MC3T3-E1 compared to the untreated Ti-6Al-4V control but did not affect cytotoxicity as shown by cell proliferation and cell death. Interestingly, on the Ti-6Al-4V-Ca2+/Pi surface treated by PEO at 280 V for 3 or 10 min, MC3T3-E1 showed a higher initial adhesion and mineralization. In addition, the alkaline phosphatase (ALP) activity significantly increased in MC3T3-E1 on the PEO-treated Ti-6Al-4V-Ca2+/Pi (280 V for 3 or 10 min). In RNA-seq analysis, the expression of dentin matrix protein 1 (DMP1), sortilin 1 (Sort1), signal-induced proliferation-associated 1 like 2 (SIPA1L2), and interferon-induced transmembrane protein 5 (IFITM5) was induced during the osteogenic differentiation of MC3T3-E1 on the PEO-treated Ti-6Al-4V-Ca2+/Pi. DMP1 and IFITM5 silencing decreased the expression of bone differentiation-related mRNAs and proteins and ALP activity in MC3T3-E1. These results suggest that the PEO-treated Ti-6Al-4V-Ca2+/Pi surface induces osteoblast differentiation by regulating the expression of DMP1 and IFITM5. Therefore, surface microstructure modification through PEO coatings with Ca2+/Pi ions could be used as a valuable method to improve biocompatibility properties of titanium alloys.
Collapse
Affiliation(s)
- Se-Ho Jeong
- Department of Pathology, School of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Khanh Toan Nguyen
- Department of Pathology, School of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Manh Tuong Nguyen
- Department of Pathology, School of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Jae-Seek You
- Department of Oral and Maxillofacial Surgery, School of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Byung-Hoon Kim
- Advanced Functional Surface and Biomaterials Research Lab, Department of Dental Materials and Research Center of Surface Control for Oral Tissue Regeneration (BRL Center of NRF), College of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Han-Cheol Choe
- Advanced Functional Surface and Biomaterials Research Lab, Department of Dental Materials and Research Center of Surface Control for Oral Tissue Regeneration (BRL Center of NRF), College of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| | - Sang-Gun Ahn
- Department of Pathology, School of Dentistry, Chosun University, Gwangju 61452, Republic of Korea
| |
Collapse
|
19
|
An HW, Lee J, Park JW. Surface characteristics and in vitro biocompatibility of surface-modified titanium foils as a regenerative barrier membrane for guided bone regeneration. J Biomater Appl 2023; 37:1228-1242. [PMID: 36205350 DOI: 10.1177/08853282221132351] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
This study evaluated surface characteristics and biocompatibility of surface-modified thin titanium (Ti) foils as a regenerative barrier membrane for future application in guided bone regeneration (GBR) surgery to augment atrophic alveolar bone. Anodic oxidation and post-heat treatment were performed to prepare various Ti foil samples. Then, the in vitro soft and hard tissue compatibility of the samples was evaluated by examining the cell responses using primary human gingival fibroblasts (HGFs) and MG63 human osteoblast-like cells. Investigated Ti foil samples showed marked differences in physicochemical surface properties. Additional 400°C heat treatment applied to the anodized Ti surface led to formation of an anatase titanium dioxide structure and well-organized nanoscale protrusions, and significantly increased surface wettability. Anodization and heat treatment enhanced the growth of HGFs and MG63 cells in Ti foil samples. Additional heat treatment for 10 and 30 min further significantly improved the response of HGFs including spreading and proliferation, and upregulated the mRNA expression of cell adhesion- and maturation-related genes as well as the osteoblast differentiation of MG63 cells. Ti foil sample with thin oxide coating obtained by a 30 min heat treatment exhibited poor clinical plasticity as a regenerative barrier membrane, which showed complete coating failure in the bending test. Our results indicate that anatase Ti oxide coating of a specific film thickness with nanoscale surface protrusion morphology and hydrophilic characteristics obtained by anodization and post-heat treatment would be an effective approach as a biocompatible Ti regenerative membrane for inducing better regeneration of both gingival tissue and bone.
Collapse
Affiliation(s)
- Hyun-Wook An
- Graduate School, 34986Kyungpook National University, Daegu, Korea.,Megagen Implant R&D Center, Daegu, Korea
| | - Jaesik Lee
- Megagen Implant R&D Center, Daegu, Korea
| | - Jin-Woo Park
- Department of Pediatric Dentistry, 65498Kyungpook National University School of Dentistry, Daegu, Korea
| |
Collapse
|
20
|
Lu S, Chen W, Wang J, Guo Z, Xiao L, Wei L, Yu J, Yuan Y, Chen W, Bian M, Huang L, Liu Y, Zhang J, Li YL, Jiang LB. Polydopamine-Decorated PLCL Conduit to Induce Synergetic Effect of Electrical Stimulation and Topological Morphology for Peripheral Nerve Regeneration. Small Methods 2023; 7:e2200883. [PMID: 36596669 DOI: 10.1002/smtd.202200883] [Citation(s) in RCA: 8] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2022] [Revised: 11/09/2022] [Indexed: 06/17/2023]
Abstract
Due to the limited self-repairing capacity after peripheral nerve injuries (PNI), artificial nerve conduits are widely applied to facilitate neural regeneration. Exogenous electrical stimulation (ES) that is carried out by the conductive conduit regulates the biological behavior of Schwann cells (SCs). Meanwhile, a longitudinal surface structure counts to guide axonal growth to accelerate the end-to-end connection. Currently, there are no conduits equipped with both electrical conduction and axon-guiding surface structure. Herein, a biodegradable, conductive poly(l-lactide-co-caprolactone)/graphene (PLCL/GN) composite conduit is designed. The conduit with 20.96 ± 1.26 MPa tensile strength has a micropatterned surface of 20 µm groove fabricated by microimprint technology and self-assembled polydopamine (PDA). In vitro evaluation shows that the conduits with ES effectively stimulate the directional cell migration, adhesion, and elongation, and enhance neuronal expression of SCs. The rat sciatic nerve crush model demonstrates that the conductive micropatterned conduit with ES promotes the growth of myelin sheath, faster nerve regeneration, and 20-fold functional recovery in vivo. These discoveries prove that the PLCL(G)/PDA/GN composite conduit is a promising tool for PNI treatment by providing the functional integration of physical guidance, biomimetic biological regulation, and bioelectrical stimulation, which inspires a novel therapeutic approach for nerve regeneration in the future.
Collapse
Affiliation(s)
- Shunyi Lu
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Wen Chen
- The Key Laboratory for Ultrafine Materials of Ministry of Education, State Key Laboratory of Bioreactor Engineering, Engineering Research Center for Biomedical Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China
| | - Jiayi Wang
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Zilong Guo
- School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, 200444, China
| | - Lan Xiao
- Centre for Biomedical Technologies, School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, 4059, Australia
| | - Lingyu Wei
- The Key Laboratory for Ultrafine Materials of Ministry of Education, State Key Laboratory of Bioreactor Engineering, Engineering Research Center for Biomedical Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China
| | - Jieqin Yu
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Ya Yuan
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Weisin Chen
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Mengxuan Bian
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Lei Huang
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Yuanyuan Liu
- School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, 200444, China
| | - Jian Zhang
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| | - Yu-Lin Li
- The Key Laboratory for Ultrafine Materials of Ministry of Education, State Key Laboratory of Bioreactor Engineering, Engineering Research Center for Biomedical Materials of Ministry of Education, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, 200237, China
- Wenzhou Institute of Shanghai University, Wenzhou, 325000, China
| | - Li-Bo Jiang
- Department of Orthopaedic Surgery, Zhongshan Hospital, Fudan University, Shanghai, 200032, China
| |
Collapse
|
21
|
Chen J, Wang C, Li H, Xu X, Yang J, Huo Z, Wang L, Zhang W, Xiao X, Ma Y. Recent Advances in Surface Modifications of Elemental Two-Dimensional Materials: Structures, Properties, and Applications. Molecules 2022; 28:molecules28010200. [PMID: 36615394 PMCID: PMC9822514 DOI: 10.3390/molecules28010200] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/11/2022] [Revised: 12/17/2022] [Accepted: 12/21/2022] [Indexed: 12/28/2022]
Abstract
The advent of graphene opens up the research into two-dimensional (2D) materials, which are considered revolutionary materials. Due to its unique geometric structure, graphene exhibits a series of exotic physical and chemical properties. In addition, single-element-based 2D materials (Xenes) have garnered tremendous interest. At present, 16 kinds of Xenes (silicene, borophene, germanene, phosphorene, tellurene, etc.) have been explored, mainly distributed in the third, fourth, fifth, and sixth main groups. The current methods to prepare monolayers or few-layer 2D materials include epitaxy growth, mechanical exfoliation, and liquid phase exfoliation. Although two Xenes (aluminene and indiene) have not been synthesized due to the limitations of synthetic methods and the stability of Xenes, other Xenes have been successfully created via elaborate artificial design and synthesis. Focusing on elemental 2D materials, this review mainly summarizes the recently reported work about tuning the electronic, optical, mechanical, and chemical properties of Xenes via surface modifications, achieved using controllable approaches (doping, adsorption, strain, intercalation, phase transition, etc.) to broaden their applications in various fields, including spintronics, electronics, optoelectronics, superconducting, photovoltaics, sensors, catalysis, and biomedicines. These advances in the surface modification of Xenes have laid a theoretical and experimental foundation for the development of 2D materials and their practical applications in diverse fields.
Collapse
Affiliation(s)
- Junbo Chen
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
| | - Chenhui Wang
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
| | - Hao Li
- School of Physical Science and Technology, Wuhan University, Wuhan 430072, China
- Key Laboratory of Artificial Micro- and Nano-Structures of Ministry of Education, Wuhan University, Wuhan 430072, China
| | - Xin Xu
- State Key Lab of Optoelectronic Materials and Technologies, Guangdong Province Key Laboratory of Display Material and Technology, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Jiangang Yang
- School of Physical Science and Technology, Wuhan University, Wuhan 430072, China
- Key Laboratory of Artificial Micro- and Nano-Structures of Ministry of Education, Wuhan University, Wuhan 430072, China
| | - Zhe Huo
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
| | - Lixia Wang
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
| | - Weifeng Zhang
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
- Correspondence: (W.Z.); (X.X.); (Y.M.)
| | - Xudong Xiao
- School of Physical Science and Technology, Wuhan University, Wuhan 430072, China
- Key Laboratory of Artificial Micro- and Nano-Structures of Ministry of Education, Wuhan University, Wuhan 430072, China
- Correspondence: (W.Z.); (X.X.); (Y.M.)
| | - Yaping Ma
- Key Laboratory of Quantum Matt Science, Henan Key Laboratory of Photovoltaic Materials, Henan University, Zhengzhou 450046, China
- Correspondence: (W.Z.); (X.X.); (Y.M.)
| |
Collapse
|
22
|
Nikolova MP, Apostolova MD. Advances in Multifunctional Bioactive Coatings for Metallic Bone Implants. Materials (Basel) 2022; 16:183. [PMID: 36614523 PMCID: PMC9821663 DOI: 10.3390/ma16010183] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/09/2022] [Revised: 12/19/2022] [Accepted: 12/21/2022] [Indexed: 06/17/2023]
Abstract
To fix the bone in orthopedics, it is almost always necessary to use implants. Metals provide the needed physical and mechanical properties for load-bearing applications. Although widely used as biomedical materials for the replacement of hard tissue, metallic implants still confront challenges, among which the foremost is their low biocompatibility. Some of them also suffer from excessive wear, low corrosion resistance, infections and shielding stress. To address these issues, various coatings have been applied to enhance their in vitro and in vivo performance. When merged with the beneficial properties of various bio-ceramic or polymer coatings remarkable bioactive, osteogenic, antibacterial, or biodegradable composite implants can be created. In this review, bioactive and high-performance coatings for metallic bone implants are systematically reviewed and their biocompatibility is discussed. Updates in coating materials and formulations for metallic implants, as well as their production routes, have been provided. The ways of improving the bioactive coating performance by incorporating bioactive moieties such as growth factors, osteogenic factors, immunomodulatory factors, antibiotics, or other drugs that are locally released in a controlled manner have also been addressed.
Collapse
Affiliation(s)
- Maria P. Nikolova
- Department of Material Science and Technology, University of Ruse “A. Kanchev”, 8 Studentska Str., 7017 Ruse, Bulgaria
| | - Margarita D. Apostolova
- Medical and Biological Research Lab., “Roumen Tsanev” Institute of Molecular Biology, Bulgarian Academy of Sciences, 1113 Sofia, Bulgaria
| |
Collapse
|
23
|
Pidhatika B, Widyaya VT, Nalam PC, Swasono YA, Ardhani R. Surface Modifications of High-Performance Polymer Polyetheretherketone (PEEK) to Improve Its Biological Performance in Dentistry. Polymers (Basel) 2022; 14:polym14245526. [PMID: 36559893 PMCID: PMC9787615 DOI: 10.3390/polym14245526] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Revised: 11/17/2022] [Accepted: 11/20/2022] [Indexed: 12/23/2022] Open
Abstract
This comprehensive review focuses on polyetheretherketone (PEEK), a synthetic thermoplastic polymer, for applications in dentistry. As a high-performance polymer, PEEK is intrinsically robust yet biocompatible, making it an ideal substitute for titanium-the current gold standard in dentistry. PEEK, however, is also inert due to its low surface energy and brings challenges when employed in dentistry. Inert PEEK often falls short of achieving a few critical requirements of clinical dental materials, such as adhesiveness, osseoconductivity, antibacterial properties, and resistance to tribocorrosion. This study aims to review these properties and explore the various surface modification strategies that enhance the performance of PEEK. Literatures searches were conducted on Google Scholar, Research Gate, and PubMed databases using PEEK, polyetheretherketone, osseointegration of PEEK, PEEK in dentistry, tribology of PEEK, surface modifications, dental applications, bonding strength, surface topography, adhesive in dentistry, and dental implant as keywords. Literature on the topics of surface modification to increase adhesiveness, tribology, and osseointegration of PEEK were included in the review. The unavailability of full texts was considered when excluding literature. Surface modifications via chemical strategies (such as sulfonation, plasma treatment, UV treatment, surface coating, surface polymerization, etc.) and/or physical approaches (such as sandblasting, laser treatment, accelerated neutral atom beam, layer-by-layer assembly, particle leaching, etc.) discussed in the literature are summarized and compared. Further, approaches such as the incorporation of bioactive materials, e.g., osteogenic agents, antibacterial agents, etc., to enhance the abovementioned desired properties are explored. This review presents surface modification as a critical and essential approach to enhance the biological performance of PEEK in dentistry by retaining its mechanical robustness.
Collapse
Affiliation(s)
- Bidhari Pidhatika
- Research Center for Polymer Technology, National Research and Innovation Agency, Republic of Indonesia PRTPL BRIN Indonesia, Serpong, Tangerang Selatan 15314, Indonesia
- Collaborative Research Center for Biomedical Scaffolds, National Research and Innovation Agency of the Republic Indonesia and Universitas Gadjah Mada, Jalan Denta No. 1, Sekip Utara, Yogyakarta 55281, Indonesia
| | - Vania Tanda Widyaya
- Research Center for Polymer Technology, National Research and Innovation Agency, Republic of Indonesia PRTPL BRIN Indonesia, Serpong, Tangerang Selatan 15314, Indonesia
| | - Prathima C. Nalam
- Department of Materials Design and Innovation, University at Buffalo, Buffalo, NY 14260-1900, USA
| | - Yogi Angga Swasono
- Research Center for Polymer Technology, National Research and Innovation Agency, Republic of Indonesia PRTPL BRIN Indonesia, Serpong, Tangerang Selatan 15314, Indonesia
| | - Retno Ardhani
- Department of Dental Biomedical Science, Faculty of Dentistry, Universitas Gadjah Mada, Jalan Denta No. 1, Sekip Utara, Yogyakarta 55281, Indonesia
- Correspondence:
| |
Collapse
|
24
|
Hajebi S, Yousefiasl S, Rahimmanesh I, Dahim A, Ahmadi S, Kadumudi FB, Rahgozar N, Amani S, Kumar A, Kamrani E, Rabiee M, Borzacchiello A, Wang X, Rabiee N, Dolatshahi-Pirouz A, Makvandi P. Genetically Engineered Viral Vectors and Organic-Based Non-Viral Nanocarriers for Drug Delivery Applications. Adv Healthc Mater 2022; 11:e2201583. [PMID: 35916145 DOI: 10.1002/adhm.202201583] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/30/2022] [Indexed: 01/28/2023]
Abstract
Conventional drug delivery systems are challenged by concerns related to systemic toxicity, repetitive doses, drug concentrations fluctuation, and adverse effects. Various drug delivery systems are developed to overcome these limitations. Nanomaterials are employed in a variety of biomedical applications such as therapeutics delivery, cancer therapy, and tissue engineering. Physiochemical nanoparticle assembly techniques involve the application of solvents and potentially harmful chemicals, commonly at high temperatures. Genetically engineered organisms have the potential to be used as promising candidates for greener, efficient, and more adaptable platforms for the synthesis and assembly of nanomaterials. Genetically engineered carriers are precisely designed and constructed in shape and size, enabling precise control over drug attachment sites. The high accuracy of these novel advanced materials, biocompatibility, and stimuli-responsiveness, elucidate their emerging application in controlled drug delivery. The current article represents the research progress in developing various genetically engineered carriers. Organic-based nanoparticles including cellulose, collagen, silk-like polymers, elastin-like protein, silk-elastin-like protein, and inorganic-based nanoparticles are discussed in detail. Afterward, viral-based carriers are classified, and their potential for targeted therapeutics delivery is highlighted. Finally, the challenges and prospects of these delivery systems are concluded.
Collapse
Affiliation(s)
- Sakineh Hajebi
- Department of Polymer Engineering, Sahand University of Technology, Tabriz, 51335-1996, Iran
- Institute of Polymeric Materials, Sahand University of Technology, Tabriz, 51335-1996, Iran
| | - Satar Yousefiasl
- School of Dentistry, Hamadan University of Medical Sciences, Hamadan, 6517838736, Iran
| | - Ilnaz Rahimmanesh
- Applied Physiology Research Center, Isfahan Cardiovascular Research Institute, Isfahan University of Medical Sciences, Isfahan, 8174673461, Iran
| | - Alireza Dahim
- Department of Anesthesia, Jundishapur University of Medical Sciences, Ahvaz, 61357-15794, Iran
| | - Sepideh Ahmadi
- Department of Biology, Faculty of Sciences, University of Zabol, Sistan and Baluchestan, Zabol, 98613-35856, Iran
| | - Firoz Babu Kadumudi
- Department of Health Technology, Technical University of Denmark, Kongens Lyngby, 2800, Denmark
| | - Nikta Rahgozar
- Department of Chemistry, Amirkabir University of Technology, Tehran, 15875-4413, Iran
| | - Sanaz Amani
- Department of Chemical Engineering, Sahand University of Technology, Tabriz, 51335-1996, Iran
| | - Arun Kumar
- Chitkara College of Pharmacy, Chitkara University, Himachal Pradesh, 174 103, India
| | - Ehsan Kamrani
- Harvard-MIT Health Science and Technology, Cambridge, MA, 02139, USA
- Wellman Center for Photomedicine, Harvard Medical School, Boston, MA, 02139, USA
| | - Mohammad Rabiee
- Biomaterials Group, Department of Biomedical Engineering, Amirkabir University of Technology, Tehran, 15875-4413, Iran
| | - Assunta Borzacchiello
- Institute for Polymers, Composites and Biomaterials, National Research Council, IPCB-CNR, Naples, 80125, Italy
| | - Xiangdong Wang
- Department of Pulmonary and Critical Care Medicine, Zhongshan Hospital, Fudan University Shanghai Medical College, Shanghai, 200032, China
| | - Navid Rabiee
- School of Engineering, Macquarie University, Sydney, NSW, 2109, Australia
- Department of Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-ro, Nam-gu, Pohang, Gyeongbuk, 37673, South Korea
| | | | - Pooyan Makvandi
- Centre for Materials Interfaces, Istituto Italiano di Tecnologia, Pontedera, Pisa, 56025, Italy
- The Quzhou Affiliated Hospital of Wenzhou Medical University, Quzhou People's Hospital, Quzhou, Zhejiang, 324000, China
- School of Chemistry, Damghan University, Damghan, 36716-41167, Iran
| |
Collapse
|
25
|
Yang L, Cui Y, Liang H, Li Z, Wang N, Wang Y, Zheng G. Multifunctional Selenium Nanoparticles with Different Surface Modifications Ameliorate Neuroinflammation through the Gut Microbiota-NLRP3 Inflammasome-Brain Axis in APP/PS1 Mice. ACS Appl Mater Interfaces 2022; 14:30557-30570. [PMID: 35758423 DOI: 10.1021/acsami.2c06283] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Neuroinflammation plays a critical role in Alzheimer's disease (AD). However, it is still unknown if neuroinflammation can be effectively treated using selenium nanoparticles (SeNPs) with different surface modifications. In this study, SeNPs were coated with dihydromyricetin (DMY), a natural polyphenol, to obtain DMY@SeNPs. Given that DMY@SeNPs are unstable under physiological conditions, they were decorated step-by-step with chitosan (CS/DMY@SeNPs) and with the blood brain barrier (BBB) targeting peptide Tg (TGNYKALHPHNG) to yield Tg-CS/DMY@SeNPs, which significantly reduced the aggregation of Aβ and improved the anti-inflammatory effects of SeNPs in vitro. The mechanisms of CS/DMY@SeNPs and Tg-CS/DMY@SeNPs on regulating neuroinflammation are different. Only Tg-CS/DMY@SeNPs can cross the BBB; therefore, Tg-CS/DMY@SeNPs more successfully inhibited Aβ aggregation and reduced inflammatory cytokine secretion via the NF-κB pathway in the brain of APP/PS1 mice compared to CS/DMY@SeNPs. Furthermore, both types of nanoparticles, however, were able to repair the gut barrier and regulate the population of inflammatory-related gut microbiota such as Bifidobacterium, Dubosiella, and Desulfovibrio. Of note, the relative abundance of Gordonibacter was only enhanced by Tg-CS/DMY@SeNPs, thereby downregulating the protein expression of the NLRP3 inflammasome and the concentrations of serum inflammatory factors. This demonstrates that Tg-CS/DMY@SeNPs ameliorate neuroinflammation through the gut microbiota-NLRP3 inflammasome-brain axis. Overall, our data suggest that Tg-CS/DMY@SeNPs are an ideal drug candidate for AD treatment.
Collapse
Affiliation(s)
- Licong Yang
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350108, China
| | - Yanan Cui
- College of Biological Science and Engineering, Fuzhou University, Fuzhou 350108, China
| | - Hanji Liang
- Jiangxi Key Laboratory of Natural Product and Functional Food, College of Food Science and Engineering, Jiangxi Agricultural University, Nanchang 330045, China
| | - Zhiwei Li
- Jiangxi Key Laboratory of Natural Product and Functional Food, College of Food Science and Engineering, Jiangxi Agricultural University, Nanchang 330045, China
| | - Na Wang
- Jiangxi Key Laboratory of Natural Product and Functional Food, College of Food Science and Engineering, Jiangxi Agricultural University, Nanchang 330045, China
| | - Yabin Wang
- Jiangxi Key Laboratory of Natural Product and Functional Food, College of Food Science and Engineering, Jiangxi Agricultural University, Nanchang 330045, China
| | - Guodong Zheng
- Jiangxi Key Laboratory of Natural Product and Functional Food, College of Food Science and Engineering, Jiangxi Agricultural University, Nanchang 330045, China
| |
Collapse
|
26
|
Liang L, Xu Y, Hu S. Bending and Crack Evolution Behaviors of Cemented Soil Reinforced with Surface Modified PVA Fiber. Materials (Basel) 2022; 15:ma15144799. [PMID: 35888264 PMCID: PMC9316012 DOI: 10.3390/ma15144799] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/24/2022] [Revised: 04/29/2022] [Accepted: 05/02/2022] [Indexed: 12/10/2022]
Abstract
To improve the flexural properties of cemented soils reinforced with fibers and avoid their brittle failure when subjected to complex loading conditions, a simple and cost-effective technique was explored to facilitate their application in retaining walls. In this study, how different fiber surface modifications, i.e., alkali treatment, acid treatment and silane coupling agent treatment, as well as different fiber contents, i.e., 0%, 0.25%, 0.5% and 1%, affect the bending properties of cemented soils was investigated by conducting three-point bending tests on notched beams. The digital image correlation (DIC) technology was used to examine the crack propagation process and the strain field distribution of cracks in specimens in the flexural tests. The results show that all fiber surface modifications increased peak strength and fracture energy, for example, the fracture energy of specimens AN1, AH1 and AK1 was increased by 180.4%, 121.5% and 155.4%, respectively, compared to PVA1. In addition, the crack tip strain, crack propagation rate and the initial crack width of the modified specimens were lower than those before modification. Lastly, scanning electron microscope (SEM) and mercury intrusion porosimetry tests were adopted to reveal the mechanism of bending performance in cemented soils reinforced by fiber surface modifications.
Collapse
Affiliation(s)
- Lisheng Liang
- Department of Civil and Architectural Engineering, Shanxi Institute of Technology, Yangquan 045000, China
- The Cultivation Base of Shanxi Key Laboratory of Mining Area Ecological Restoration and Solid Wastes Utilization, Yangquan 045000, China
- Correspondence:
| | - Yaxing Xu
- College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China; (Y.X.); (S.H.)
| | - Shunlei Hu
- College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China; (Y.X.); (S.H.)
| |
Collapse
|
27
|
Park JW, Seo JH, Lee HJ. Enhanced osteogenic differentiation of mesenchymal stem cells by surface lithium modification in a sandblasted/acid-etched titanium implant. J Biomater Appl 2022; 37:447-458. [PMID: 35594165 DOI: 10.1177/08853282221104242] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023]
Abstract
This study investigated the osteogenesis-related cell functions of osteoprogenitor cells modulated by surface chemistry modification using lithium (Li) ions in a current clinical oral implant surface in order to gain insights into the future development of titanium (Ti) implants with enhanced osteogenic capacity. Wet chemical treatment was performed to modify a sandblasted/acid-etched (SLA) Ti implant surface using Li ions. The osteogenesis-related cell response to the surface Li ion-modified SLA sample was evaluated using two kinds of murine bone marrow stem cells, bipotent ST2 cells and primary multipotent mesenchymal stem cells (MSCs). The modified surface exhibited the formation of an Li-containing Ti oxide layer with plate-like nanostructures. The Li-incorporated surface enhanced early cellular events, including spreading, focal adhesion formation and integrin mRNA expression (α2, α5, αv and β3), and accelerated osteogenic differentiation of bipotent ST2 cells compared with unmodified SLA surface. Surface Li modification significantly increased GSK-3β phosphorylation and suppressed β-catenin phosphorylation, and promoted the subsequent osteogenic differentiation of primary MSCs. These results indicate that surface chemistry modification of SLA implants by wet chemical treatment with Li ions induces a more favorable osseointegration outcome through the promotion of the osteogenic differentiation of bone marrow MSCs via the positive regulation of GSK-3β and β-catenin activity.
Collapse
Affiliation(s)
- Jin-Woo Park
- Department of Periodontology, School of Dentistry, 65498Kyungpook National University, Daegu, Korea.,Jin-Woo Park, Department of Periodontology, School of Dentistry, Kyungpook National University, 2177 Dalgubeol-daero, Jung-Gu, Daegu 41940, Korea.
| | - Ji-Hun Seo
- Department of Materials Science and Engineering, 542877Korea University, Seoul, Korea
| | - Heon-Jin Lee
- School of Dentistry, 65498Kyungpook National University, Daegu, Korea
| |
Collapse
|
28
|
Pierfelice TV, D'Amico E, Iezzi G, Piattelli A, Di Pietro N, D'Arcangelo C, Comuzzi L, Petrini M. Nanoporous Titanium Enriched with Calcium and Phosphorus Promotes Human Oral Osteoblast Bioactivity. Int J Environ Res Public Health 2022; 19:6212. [PMID: 35627749 DOI: 10.3390/ijerph19106212] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/24/2022] [Revised: 05/05/2022] [Accepted: 05/16/2022] [Indexed: 12/12/2022]
Abstract
Implant surfaces are known to influence the osseointegration process; therefore, their modifications represent an important subject of investigation. On this basis, the purpose of this study was to evaluate the response of human oral osteoblasts (hOBs) to three different GR4 titanium discs: Machined, double-etched (Osteopore), and double-etched, surface-enriched with calcium and phosphorus (CaP) (Nanopore). The superficial topography was investigated with scanning electron microscopy (SEM) and the sessile drop technique. To test cellular response and osteoinductive properties, the following points were evaluated: (i) proliferation by MTS assay after 2 and 5 days; (ii) adhesion by multiphoton microscopy at day 2; (iii) the interaction with Ti discs by blue toluidine staining at day 5; (iv) alkaline phosphatase (ALP) activity by ALP assay after 14 days; (v) calcium deposition by alizarin red staining and by cetylpyridinium chloride after 14 days. The SEM analysis showed that Nanopore and Osteopore surfaces were characterized by the same micro-topography. Nanopore and Osteopore discs, compared to Machined, stimulated higher osteoblast proliferation and showed more osteoinductive properties by promoting the ALP activity and calcium deposition. In conclusion, the CaP treatment on DAE surfaces seemed to favor the oral osteoblast response, encouraging their use for in vivo applications.
Collapse
|
29
|
Silva RCS, Agrelli A, Andrade AN, Mendes-Marques CL, Arruda IRS, Santos LRL, Vasconcelos NF, Machado G. Titanium Dental Implants: An Overview of Applied Nanobiotechnology to Improve Biocompatibility and Prevent Infections. Materials (Basel) 2022; 15:3150. [PMID: 35591484 PMCID: PMC9104688 DOI: 10.3390/ma15093150] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/29/2022] [Revised: 04/20/2022] [Accepted: 04/21/2022] [Indexed: 02/06/2023]
Abstract
This review addresses the different aspects of the use of titanium and its alloys in the production of dental implants, the most common causes of implant failures and the development of improved surfaces capable of stimulating osseointegration and guaranteeing the long-term success of dental implants. Titanium is the main material for the development of dental implants; despite this, different surface modifications are studied aiming to improve the osseointegration process. Nanoscale modifications and the bioactivation of surfaces with biological molecules can promote faster healing when compared to smooth surfaces. Recent studies have also pointed out that gradual changes in the implant, based on the microenvironment of insertion, are factors that may improve the integration of the implant with soft and bone tissues, preventing infections and osseointegration failures. In this context, the understanding that nanobiotechnological surface modifications in titanium dental implants improve the osseointegration process arouses interest in the development of new strategies, which is a highly relevant factor in the production of improved dental materials.
Collapse
Affiliation(s)
| | | | | | | | | | | | | | - Giovanna Machado
- Centro de Tecnologias Estratégicas do Nordeste-Cetene, Av. Prof. Luiz Freire, 01, Cidade Universitária, Recife CEP 50740-545, PE, Brazil; (R.C.S.S.); (A.A.); (A.N.A.); (C.L.M.-M.); (I.R.S.A.); (L.R.L.S.); (N.F.V.)
| |
Collapse
|
30
|
Xu R, Zhang Y, Ma S, Ma Z, Yu B, Cai M, Zhou F. A Universal Strategy for Growing a Tenacious Hydrogel Coating from a Sticky Initiation Layer. Adv Mater 2022; 34:e2108889. [PMID: 35014101 DOI: 10.1002/adma.202108889] [Citation(s) in RCA: 25] [Impact Index Per Article: 12.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/03/2021] [Revised: 01/04/2022] [Indexed: 06/14/2023]
Abstract
Controllably coating the surfaces of substrates/medical devices with hydrogels exhibits great application potential, but lacks universal techniques. Herein, a new method, namely ultraviolet-triggered surface catalytically initiated radical polymerization (UV-SCIRP) from a sticky initiation layer (SIL) (SIL@UV-SCIRP), is proposed for growing hydrogel coatings. The method involves three key steps: 1) depositing a sticky polydopamine/Fe3+ coating on the surface of the substrates-SIL, 2) reducing Fe3+ ions to Fe2+ ions as active catalysts by UV illumination with the assistance of citric acid, and 3) conducting SCIRP in a monomer solution at room temperature for growing hydrogel coatings. In this manner, practically any substrate's surface (natural or artificial materials) can be modified by hydrogel coatings with controllable thickness and diverse compositions. The hydrogel coatings exhibit good interface bonding with the substrates and enable easy changes in their wettability and lubrication performances. Importantly, this novel method facilitates the smooth growth of uniform hydrogel lubrication coatings on the surface of a range of medical devices with complex geometries. Finally, as a proof-of-concept, the slippery balls coated with hydrogel exhibited smooth movement within the catheter and esophagus. Hence, this method can prove to be a pioneering universal modification tool, especially in surface/interface science and engineering.
Collapse
Affiliation(s)
- Rongnian Xu
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
- College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou, 730070, China
| | - Yunlei Zhang
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
- College of Materials Science and Opto-Electronic Technology, University of Chinese Academy of Sciences, Beijing, 100049, China
| | - Shuanhong Ma
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
- Shandong Laboratory of Yantai Advanced Materials and Green Manufacture, Yantai, 264006, China
- Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
| | - Zhengfeng Ma
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
- Shandong Laboratory of Yantai Advanced Materials and Green Manufacture, Yantai, 264006, China
- Yantai Zhongke Research Institute of Advanced Materials and Green Chemical Engineering, Yantai, 264006, China
| | - Bo Yu
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| | - Meirong Cai
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| | - Feng Zhou
- State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, China
| |
Collapse
|
31
|
Raziq F, Aligayev A, Shen H, Ali S, Shah R, Ali S, Bakhtiar SH, Ali A, Zarshad N, Zada A, Xia X, Zu X, Khan M, Wu X, Kong Q, Liu C, Qiao L. Exceptional Photocatalytic Activities of rGO Modified (B,N) Co-Doped WO 3 , Coupled with CdSe QDs for One Photon Z-Scheme System: A Joint Experimental and DFT Study. Adv Sci (Weinh) 2022; 9:e2102530. [PMID: 34859614 PMCID: PMC8805570 DOI: 10.1002/advs.202102530] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/15/2021] [Revised: 08/18/2021] [Indexed: 05/06/2023]
Abstract
Artificial Z-scheme, a tandem structure with two-step excitation process, has gained significant attention in energy production and environmental remediation. By effectively connecting and matching the band-gaps of two different photosystems, it is significant to utilize more photons for excellent photoactivity. Herein, a novel one-photon (same energy-two-photon) Z-scheme system is constructed between rGO modified boron-nitrogen co-doped-WO3 , and coupled CdSe quantum dots-(QDs). The coctalyst-0.5%Rhx Cr2 O3 (0.5RCr) modified amount-optimized sample 6%CdSe/1%rGO3%BN-WO3 revealed an unprecedented visible-light driven overall-water-splitting to produce ≈51 µmol h-1 g-1 H2 and 25.5 µmol h-1 g-1 O2 , and it remained unchanged for 5 runs in 30 h. This superior performance is ascribed to the one-photon Z-scheme, which simultaneously stimulates a two photocatalysts system, and enhanced charge separation as revealed by various spectroscopy techniques. The density-functional theory is further utilized to understand the origin of this performance enhancement. This work provides a feasible strategy for constructing an efficient one-photon Z-scheme for practical applications.
Collapse
Affiliation(s)
- Fazal Raziq
- Yangtze Delta Region Institute (Huzhou)University of Electronic Science and Technology of ChinaHuzhou313001P. R. China
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Amil Aligayev
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Huahai Shen
- Institute of Nuclear Physics and ChemistryChinese Academy of Engineering PhysicsMianyang621900P. R. China
| | - Sharafat Ali
- Yangtze Delta Region Institute (Huzhou)University of Electronic Science and Technology of ChinaHuzhou313001P. R. China
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Rahim Shah
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Sajjad Ali
- Department of PhysicsSouthern University of Science and TechnologyShenzhen518055P. R. China
| | - Syedul H. Bakhtiar
- The State Key Laboratory of Advanced Technology for Materials Synthesis and ProcessingWuhan University of TechnologyWuhan430070P. R. China
| | - Asad Ali
- Department of ChemistryAbdul Wali Khan University MardanKPK23200Pakistan
| | - Naghat Zarshad
- Department of ChemistryAbdul Wali Khan University MardanKPK23200Pakistan
| | - Amir Zada
- Department of ChemistryAbdul Wali Khan University MardanKPK23200Pakistan
| | - Xiang Xia
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Xiaotao Zu
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Muslim Khan
- Department of ChemistryKohat University of Science and TechnologyKohatKPK26000Pakistan
| | - Xiaoqiang Wu
- School of Mechanical EngineeringChengdu UniversityChengdu610106P. R. China
| | - Qingquan Kong
- School of Mechanical EngineeringChengdu UniversityChengdu610106P. R. China
| | - Chunming Liu
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| | - Liang Qiao
- Yangtze Delta Region Institute (Huzhou)University of Electronic Science and Technology of ChinaHuzhou313001P. R. China
- School of PhysicsUniversity of Electronic Science and Technology of ChinaChengdu610054P. R. China
| |
Collapse
|
32
|
Stich T, Alagboso F, Křenek T, Kovářík T, Alt V, Docheva D. Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo. Bioeng Transl Med 2022; 7:e10239. [PMID: 35079626 PMCID: PMC8780039 DOI: 10.1002/btm2.10239] [Citation(s) in RCA: 34] [Impact Index Per Article: 17.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2021] [Revised: 06/08/2021] [Accepted: 06/13/2021] [Indexed: 12/12/2022] Open
Abstract
Titanium is commonly and successfully used in dental and orthopedic implants. However, patients still have to face the risk of implant failure due to various reasons, such as implant loosening or infection. The risk of implant loosening can be countered by optimizing the osteointegration capacity of implant materials. Implant surface modifications for structuring, roughening and biological activation in favor for osteogenic differentiation have been vastly studied. A key factor for a successful stable long-term integration is the initial cellular response to the implant material. Hence, cell-material interactions, which are dependent on the surface parameters, need to be considered in the implant design. Therefore, this review starts with an introduction to the basics of cell-material interactions as well as common surface modification techniques. Afterwards, recent research on the impact of osteogenic processes in vitro and vivo provoked by various surface modifications is reviewed and discussed, in order to give an update on currently applied and developing implant modification techniques for enhancing osteointegration.
Collapse
Affiliation(s)
- Theresia Stich
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| | - Francisca Alagboso
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| | - Tomáš Křenek
- New Technologies Research CentreUniversity of West BohemiaPilsenCzech Republic
| | - Tomáš Kovářík
- New Technologies Research CentreUniversity of West BohemiaPilsenCzech Republic
| | - Volker Alt
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
- Clinic and Polyclinic for Trauma Surgery, University Regensburg Medical CentreRegensburgGermany
| | - Denitsa Docheva
- Experimental Trauma Surgery, Department of Trauma SurgeryUniversity Regensburg Medical CentreRegensburgGermany
| |
Collapse
|
33
|
Yan X, Cao W, Li H. Biomedical Alloys and Physical Surface Modifications: A Mini-Review. Materials (Basel) 2021; 15:66. [PMID: 35009212 PMCID: PMC8745789 DOI: 10.3390/ma15010066] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/30/2021] [Revised: 12/03/2021] [Accepted: 12/10/2021] [Indexed: 01/10/2023]
Abstract
Biomedical alloys are essential parts of modern biomedical applications. However, they cannot satisfy the increasing requirements for large-scale production owing to the degradation of metals. Physical surface modification could be an effective way to enhance their biofunctionality. The main goal of this review is to emphasize the importance of the physical surface modification of biomedical alloys. In this review, we compare the properties of several common biomedical alloys, including stainless steel, Co-Cr, and Ti alloys. Then, we introduce the principle and applications of some popular physical surface modifications, such as thermal spraying, glow discharge plasma, ion implantation, ultrasonic nanocrystal surface modification, and physical vapor deposition. The importance of physical surface modifications in improving the biofunctionality of biomedical alloys is revealed. Future studies could focus on the development of novel coating materials and the integration of various approaches.
Collapse
Affiliation(s)
- Xinxin Yan
- Department of Orthopedics, Renmin Hospital, Wuhan University, Wuhan 430060, China;
| | - Wei Cao
- Key Laboratory of Artificial Micro- and Nano-Structures of Ministry of Education, School of Physics and Technology, Wuhan University, Wuhan 430072, China
| | - Haohuan Li
- Department of Orthopedics, Renmin Hospital, Wuhan University, Wuhan 430060, China;
| |
Collapse
|
34
|
Abstract
We introduce Viral Phrenology, a new scheme for understanding the genomic composition of spherical viruses based on the locations of their structural protrusions. We used icosahedral point arrays to classify 135 distinct viral capsids collected from over 600 capsids available in the VIPERdb. Using gauge points of point arrays, we found 149 unique structural protrusions. We then show how to use the locations of these protrusions to determine the genetic composition of the virus. We then show that ssDNA, dsDNA, dsRNA and ssRNA viruses use different arrangements for distributing their protrusions. We also found that Triangulation number is also partially dependent on the structural protrusions. This analysis begins to tie together Baltimore Classification and Triangulation number using point arrays.
Collapse
|
35
|
Syuhada DN, Azura AR. Waste Natural Polymers as Potential Fillers for Biodegradable Latex-Based Composites: A Review. Polymers (Basel) 2021; 13:3600. [PMID: 34685359 PMCID: PMC8541419 DOI: 10.3390/polym13203600] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/20/2021] [Revised: 10/12/2021] [Accepted: 10/13/2021] [Indexed: 11/16/2022] Open
Abstract
In recent years, biodegradable composites have become important in various fields because of the increasing awareness of the global environment. Waste natural polymers have received much attention as renewable, biodegradable, non-toxic and low-cost filler in polymer composites. In order to exploit the high potential for residual natural loading in latex composites, different types of surface modification techniques have been applied. This review discusses the preparation and characterization of the modified waste natural fillers for latex-based composites. The potency of the waste natural filler for the latex-based composites was explored with a focus on the mechanical, thermal, biodegradability and filler-latex interaction. This review also offers an update on the possible application of the waste natural filler towards the biodegradability of the latex-based composites for a more sustainable future.
Collapse
Affiliation(s)
| | - A. R. Azura
- School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, Nibong Tebal 14300, Penang, Malaysia;
| |
Collapse
|
36
|
Della Sala F, Fabozzi A, di Gennaro M, Nuzzo S, Makvandi P, Solimando N, Pagliuca M, Borzacchiello A. Advances in Hyaluronic-Acid-Based (Nano)Devices for Cancer Therapy. Macromol Biosci 2021; 22:e2100304. [PMID: 34657388 DOI: 10.1002/mabi.202100304] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/04/2021] [Revised: 10/08/2021] [Indexed: 12/12/2022]
Abstract
Cancer is the main cause of fatality all over the world with a considerable growth rate. Many biologically active nanoplatforms are exploited for tumor treatment. Of nanodevices, hyaluronic acid (HA)-based systems have shown to be promising candidates for cancer therapy due to their high biocompatibility and cell internalization. Herein, surface functionalization of different nanoparticles (NPs), e.g., organic- and inorganic-based NPs, is highlighted. Subsequently, HA-based nanostructures and their applications in cancer therapy are presented.
Collapse
Affiliation(s)
- Francesca Della Sala
- Institute of Polymers, Composites and Biomaterials, National Research Council, IPCB-CNR, Viale J.F. Kennedy 54, Naples, 80125, Italy
| | - Antonio Fabozzi
- Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040, Italy
| | - Mario di Gennaro
- Institute of Polymers, Composites and Biomaterials, National Research Council, IPCB-CNR, Viale J.F. Kennedy 54, Naples, 80125, Italy
| | - Stefano Nuzzo
- Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040, Italy
| | - Pooyan Makvandi
- Institute of Polymers, Composites and Biomaterials, National Research Council, IPCB-CNR, Viale J.F. Kennedy 54, Naples, 80125, Italy
| | - Nicola Solimando
- Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040, Italy
| | - Maurizio Pagliuca
- Altergon Italia s.r.l, Zona Industriale ASI, Morra De Sanctis (AV), 83040, Italy
| | - Assunta Borzacchiello
- Institute of Polymers, Composites and Biomaterials, National Research Council, IPCB-CNR, Viale J.F. Kennedy 54, Naples, 80125, Italy
| |
Collapse
|
37
|
Oh JW, Shin J, Chun S, Muthu M, Gopal J. Evaluating the Anticarcinogenic Activity of Surface Modified/Functionalized Nanochitosan: The Emerging Trends and Endeavors. Polymers (Basel) 2021; 13:3138. [PMID: 34578039 PMCID: PMC8471611 DOI: 10.3390/polym13183138] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2021] [Revised: 09/09/2021] [Accepted: 09/15/2021] [Indexed: 11/16/2022] Open
Abstract
Chitosan begins its humble journey from marine food shell wastes and ends up as a versatile nutraceutical. This review focuses on briefly discussing the antioxidant activity of chitosan and retrospecting the accomplishments of chitosan nanoparticles as an anticarcinogen. The various modified/functionalized/encapsulated chitosan nanoparticles and nanoforms have been listed and their biomedical deliverables presented. The anticancer accomplishments of chitosan and its modified composites have been reviewed and presented. The future of surface modified chitosan and the lacunae in the current research focus have been discussed as future perspective. This review puts forth the urge to expand the scientific curiosity towards attempting a variety of functionalization and surface modifications to chitosan. There are few well known modifications and functionalization that benefit biomedical applications that have been proven for other systems. Being a biodegradable, biocompatible polymer, chitosan-based nanomaterials are an attractive option for medical applications. Therefore, maximizing expansion of its bioactive properties are explored. The need for applying the ideal functionalization that will significantly promote the anticancer contributions of chitosan nanomaterials has also been stressed.
Collapse
Affiliation(s)
- Jae-Wook Oh
- Department of Stem Cell and Regenerative Biotechnology, Konkuk University, Seoul 143-701, Korea; (J.-W.O.); (J.S.)
| | - Juhyun Shin
- Department of Stem Cell and Regenerative Biotechnology, Konkuk University, Seoul 143-701, Korea; (J.-W.O.); (J.S.)
| | - Sechul Chun
- Department of Environmental Health Science, Konkuk University, Seoul 143-701, Korea; (S.C.); (M.M.)
| | - Manikandan Muthu
- Department of Environmental Health Science, Konkuk University, Seoul 143-701, Korea; (S.C.); (M.M.)
| | - Judy Gopal
- Department of Environmental Health Science, Konkuk University, Seoul 143-701, Korea; (S.C.); (M.M.)
| |
Collapse
|
38
|
Xie L, Wang G, Wu Y, Liao Q, Mo S, Ren X, Tong L, Zhang W, Guan M, Pan H, Chu PK, Wang H. Programmed surface on poly(aryl-ether-ether-ketone) initiating immune mediation and fulfilling bone regeneration sequentially. Innovation (N Y) 2021; 2:100148. [PMID: 34557785 PMCID: PMC8454576 DOI: 10.1016/j.xinn.2021.100148] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2021] [Accepted: 07/26/2021] [Indexed: 12/22/2022] Open
Abstract
The immune responses are involved in every stage after implantation but the reported immune-regulated materials only work at the beginning without fully considering the different phases of bone healing. Here, poly(aryl-ether-ether-ketone) (PEEK) is coated with a programmed surface, which rapidly releases interleukin-10 (IL-10) in the first week and slowly delivers dexamethasone (DEX) up to 4 weeks. Owing to the synergistic effects of IL-10 and DEX, an aptly weak inflammation is triggered within the first week, followed by significant M2 polarization of macrophages and upregulation of the autophagy-related factors. The suitable immunomodulatory activities pave the way for osteogenesis and the steady release of DEX facilitates bone regeneration thereafter. The sequential immune-mediated process is also validated by an 8-week implementation on a rat model. This is the first attempt to construct implants by taking advantage of both immune-mediated modulation and sequential regulation spanning all bone regeneration phases, which provides insights into the fabrication of advanced biomaterials for tissue engineering and immunological therapeutics. A programed surface is designed and fabricated for immune-mediated osteogenesis The degradation of PTMC coating enables a sequential release of IL-10 and DEX Initially, osteoimmunomodulation is achieved by IL-10 and a small amount of DEX Afterwards, sustained release of DEX fosters the peri-implant bone regeneration
Collapse
Affiliation(s)
- Lingxia Xie
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Guomin Wang
- Department of Physics, Department of Materials Science and Engineering, and Department of Biomedical Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Yuzheng Wu
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China.,Department of Physics, Department of Materials Science and Engineering, and Department of Biomedical Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Qing Liao
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Shi Mo
- Department of Physics, Department of Materials Science and Engineering, and Department of Biomedical Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Xiaoxue Ren
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Liping Tong
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Wei Zhang
- Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China
| | - Min Guan
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Haobo Pan
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Paul K Chu
- Department of Physics, Department of Materials Science and Engineering, and Department of Biomedical Engineering, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong, China
| | - Huaiyu Wang
- Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| |
Collapse
|
39
|
Abstract
Osseointegration of titanium (Ti) implants in bone is crucial for dental implant treatment. Bacterial challenge possibly leading to peri-implantitis threatens long-term success. For the improvement of osseointegration, an understanding of materials and tissue intervention is needed. This in vitro study analyzed changes of different implant surfaces exposed to simulated body fluid (SBF). Implants were analyzed by scanning electron microscopy/X-ray photoelectron spectroscopy. Supernatants (SNs) were assessed using inductively coupled plasma-mass spectrometry (ICP-MS). Additional calcium (Ca) and phosphate (P) crystals developed (Hank's buffered salt solution (HBSS)) on implants with layered surfaces. ICP of SN demonstrated a decreased Ca/P ratio. After incubation with human serum (HS), layers appeared flattened containing <1% Ca/P. The etched/machined implants showed the formation of a surface transformation layer or coating consisting of crystalline Ca/P precipitations and a decrease in the Ca/P ratio in the supernatant. Incubation in HS induced noncrystalline coverage, and increased Ti/Ca/P was detected in supernatants. HBSS induced crystals on surfaces of modified implants and crystalline covers on nonmodified implants containing Ca/P. The serum did not show the development of HA-like structures but showed dissolving effects. Titanium surfaces show completely altered behavior when incubated in serum-containing SBF.
Collapse
Affiliation(s)
- Sabine Groeger
- Dental School, Department of Periodontology, Justus-Liebig University Giessen, Schlangenzahl 14, 35392 Giessen, Germany
| | - Joerg Meyle
- Dental School, Department of Periodontology, Justus-Liebig University Giessen, Schlangenzahl 14, 35392 Giessen, Germany
| |
Collapse
|
40
|
Kun K, Weltsch Z. Effect of Femtosecond-Laser-Structured Injection Molding Tool on Mechanical Properties of the Manufactured Product. Polymers (Basel) 2021; 13:2187. [PMID: 34209350 DOI: 10.3390/polym13132187] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/07/2021] [Revised: 06/24/2021] [Accepted: 06/29/2021] [Indexed: 12/18/2022] Open
Abstract
During the injection molding process, the melt travels with a flow due to friction. As the velocity of the layers next to the wall is less than that of those flowing in the middle of the channel, a fountain flow is formed at the melt front. The temperature of the polymer surface decreases from the melt temperature to the contact temperature after contacting the mold surface. Based on all this, a complex shell–core structure is formed in injection-molded products, which can be influenced by the processing parameters and the surface of the tool insert. This paper focuses on investigating the effect of the microstructures replicated from the insert to the polymer product on its mechanical properties. During the research, two microstructured surfaces were created, with different effects on the melt flow formed by the femtosecond laser. These were compared with a ground insert to analyze the effects. For examining the effect of technological variables on the mechanical properties, an experimental design was used. The structure created by the femtosecond laser on the surface of the tool influenced the mechanical properties of the polymer products. Recognizing the effect of microstructures on the melt front and, through this, the change in mechanical properties, a predefined polymer product property can be achieved.
Collapse
|
41
|
Shen B, Huang L, Shen J, He K, Zheng CY, Dravid VP, Wolverton C, Mirkin CA. Crystal structure engineering in multimetallic high-index facet nanocatalysts. Proc Natl Acad Sci U S A 2021; 118:e2105722118. [PMID: 34162710 DOI: 10.1073/pnas.2105722118] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/18/2022] Open
Abstract
In the context of metal particle catalysts, composition, shape, exposed facets, crystal structure, and atom distribution dictate activity. While techniques have been developed to control each of these parameters, there is no general method that allows one to optimize all parameters in the context of polyelemental systems. Herein, by combining a solid-state, Bi-influenced, high-index facet shape regulation strategy with thermal annealing, we achieve control over crystal structure and atom distribution on the exposed high-index facets, resulting in an unprecedentedly diverse library of chemically disordered and ordered multimetallic (Pt, Co, Ni, Cu, Fe, and Mn) tetrahexahedral (THH) nanoparticles. Density functional theory calculations show that surface Bi modification stabilizes the {210} high-index facets of the nanoparticles, regardless of their internal atomic ordering. Moreover, we find that the ordering transition temperatures for the nanoparticles are dependent on their composition, and, in the case of Pt3Fe1 THH nanoparticles, increasing Ni substitution leads to an order-to-disorder transition at 900 °C. Finally, we have discovered that ordered intermetallic THH Pt1Co1 nanocatalysts exhibit a catalytic performance superior to disordered THH Pt1Co1 nanoparticles and commercial Pt/C catalysts toward methanol electrooxidation, highlighting the importance of crystal structure and atom distribution control on high-index facets in nanoscale catalysts.
Collapse
|
42
|
Sarcina L, Mangiatordi GF, Torricelli F, Bollella P, Gounani Z, Österbacka R, Macchia E, Torsi L. Surface Plasmon Resonance Assay for Label-Free and Selective Detection of HIV-1 p24 Protein. Biosensors (Basel) 2021; 11:180. [PMID: 34204930 PMCID: PMC8229864 DOI: 10.3390/bios11060180] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/05/2021] [Revised: 05/31/2021] [Accepted: 06/01/2021] [Indexed: 11/23/2022]
Abstract
The early detection of the human immunodeficiency virus (HIV) is of paramount importance to achieve efficient therapeutic treatment and limit the disease spreading. In this perspective, the assessment of biosensing assay for the HIV-1 p24 capsid protein plays a pivotal role in the timely and selective detection of HIV infections. In this study, multi-parameter-SPR has been used to develop a reliable and label-free detection method for HIV-1 p24 protein. Remarkably, both physical and chemical immobilization of mouse monoclonal antibodies against HIV-1 p24 on the SPR gold detecting surface have been characterized for the first time. The two immobilization techniques returned a capturing antibody surface coverage as high as (7.5 ± 0.3) × 1011 molecule/cm2 and (2.4 ± 0.6) × 1011 molecule/cm2, respectively. However, the covalent binding of the capturing antibodies through a mixed self-assembled monolayer (SAM) of alkanethiols led to a doubling of the p24 binding signal. Moreover, from the modeling of the dose-response curve, an equilibrium dissociation constant KD of 5.30 × 10-9 M was computed for the assay performed on the SAM modified surface compared to a much larger KD of 7.46 × 10-5 M extracted for the physisorbed antibodies. The chemically modified system was also characterized in terms of sensitivity and selectivity, reaching a limit of detection of (4.1 ± 0.5) nM and an unprecedented selectivity ratio of 0.02.
Collapse
Affiliation(s)
- Lucia Sarcina
- Dipartimento di Chimica, Universita’ degli Studi di Bari A. Moro, 70125 Bari, Italy; (L.S.); (P.B.); (L.T.)
| | | | - Fabrizio Torricelli
- Dipartimento di Ingegneria dell’Informazione, Università degli Studi di Brescia, 25123 Brescia, Italy;
| | - Paolo Bollella
- Dipartimento di Chimica, Universita’ degli Studi di Bari A. Moro, 70125 Bari, Italy; (L.S.); (P.B.); (L.T.)
| | - Zahra Gounani
- Physics, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland; (Z.G.); (R.Ö.)
| | - Ronald Österbacka
- Physics, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland; (Z.G.); (R.Ö.)
| | - Eleonora Macchia
- Physics, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland; (Z.G.); (R.Ö.)
| | - Luisa Torsi
- Dipartimento di Chimica, Universita’ degli Studi di Bari A. Moro, 70125 Bari, Italy; (L.S.); (P.B.); (L.T.)
- Physics, Faculty of Science and Engineering, Åbo Akademi University, 20500 Turku, Finland; (Z.G.); (R.Ö.)
- CSGI (Centre for Colloid and Surface Science), 70125 Bari, Italy
| |
Collapse
|
43
|
Agour M, Abdal-hay A, Hassan MK, Bartnikowski M, Ivanovski S. Alkali-Treated Titanium Coated with a Polyurethane, Magnesium and Hydroxyapatite Composite for Bone Tissue Engineering. Nanomaterials (Basel) 2021; 11:1129. [PMID: 33925403 PMCID: PMC8145718 DOI: 10.3390/nano11051129] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/25/2021] [Revised: 04/16/2021] [Accepted: 04/20/2021] [Indexed: 11/17/2022]
Abstract
The aim of this study was to form a functional layer on the surface of titanium (Ti) implants to enhance their bioactivity. Layers of polyurethane (PU), containing hydroxyapatite (HAp) nanoparticles (NPs) and magnesium (Mg) particles, were deposited on alkali-treated Ti surfaces using a cost-effective dip-coating approach. The coatings were assessed in terms of morphology, chemical composition, adhesion strength, interfacial bonding, and thermal properties. Additionally, cell response to the variably coated Ti substrates was investigated using MC3T3-E1 osteoblast-like cells, including assessment of cell adhesion, cell proliferation, and osteogenic activity through an alkaline phosphatase (ALP) assay. The results showed that the incorporation of HAp NPs enhanced the interfacial bonding between the coating and the alkali-treated Ti surface. Furthermore, the presence of Mg and HAp particles enhanced the surface charge properties as well as cell attachment, proliferation, and differentiation. Our results suggest that the deposition of a bioactive composite layer containing Mg and HAp particles on Ti implants may have the potential to induce bone formation.
Collapse
Affiliation(s)
- Mahmoud Agour
- Department of Production Engineering and Design, Faculty of Engineering, Minia University, Minia 61112, Egypt; (M.A.); (M.K.H.)
| | - Abdalla Abdal-hay
- Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), School of Dentistry, Herston Campus, The University of Queensland, 288 Herston Road, Herston, QLD 4006, Australia;
- Department of Engineering Materials and Mechanical Design, Faculty of Engineering, South Valley University, Qena 83523, Egypt
| | - Mohamed K. Hassan
- Department of Production Engineering and Design, Faculty of Engineering, Minia University, Minia 61112, Egypt; (M.A.); (M.K.H.)
- Department of Mechanical Engineering, College of Engineering, Umm Al-Qura University (UQU), Mecca 24381, Saudi Arabia
| | - Michal Bartnikowski
- Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), School of Dentistry, Herston Campus, The University of Queensland, 288 Herston Road, Herston, QLD 4006, Australia;
| | - Sašo Ivanovski
- Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), School of Dentistry, Herston Campus, The University of Queensland, 288 Herston Road, Herston, QLD 4006, Australia;
| |
Collapse
|
44
|
Shi Y, Li Z, Liu PY, Nguyen BTT, Wu W, Zhao Q, Chin LK, Wei M, Yap PH, Zhou X, Zhao H, Yu D, Tsai DP, Liu AQ. On-Chip Optical Detection of Viruses: A Review. Adv Photonics Res 2021; 2:2000150. [PMID: 33786535 PMCID: PMC7994989 DOI: 10.1002/adpr.202000150] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/18/2020] [Revised: 12/31/2020] [Indexed: 05/17/2023]
Abstract
The current outbreak of the coronavirus disease-19 (COVID-19) pandemic worldwide has caused millions of fatalities and imposed a severe impact on our daily lives. Thus, the global healthcare system urgently calls for rapid, affordable, and reliable detection toolkits. Although the gold-standard nucleic acid amplification tests have been widely accepted and utilized, they are time-consuming and labor-intensive, which exceedingly hinder the mass detection in low-income populations, especially in developing countries. Recently, due to the blooming development of photonics, various optical chips have been developed to detect single viruses with the advantages of fast, label-free, affordable, and point of care deployment. Herein, optical approaches especially in three perspectives, e.g., flow-free optical methods, optofluidics, and surface-modification-assisted approaches, are summarized. The future development of on-chip optical-detection methods in the wave of emerging new ideas in nanophotonics is also briefly discussed.
Collapse
Affiliation(s)
- Yuzhi Shi
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Zhenyu Li
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
- National Key Laboratory of Science and Technology on Micro/Nano FabricationInstitute of MicroelectronicsPeking UniversityBeijing100871China
| | - Patricia Yang Liu
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Binh Thi Thanh Nguyen
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Wenshuai Wu
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Qianbin Zhao
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Lip Ket Chin
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
- Center for Systems BiologyMassachusetts General HospitalBostonMA02141USA
| | - Minggui Wei
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| | - Peng Huat Yap
- Lee Kong Chian School of MedicineNanyang Technological UniversitySingapore308232Singapore
| | - Xiaohong Zhou
- State Key Joint Laboratory of ESPCSchool of EnvironmentTsinghua UniversityBeijing100084China
| | - Hongwei Zhao
- State Key Laboratory of Marine Resource Utilization of South China SeaHainan UniversityHaikou570228China
| | - Dan Yu
- Beijing Pediatric Research InstituteBeijing Children's HospitalCapital Medical UniversityNational Center for Children's HealthBeijing100045China
| | - Din Ping Tsai
- Department of Electronic and Information EngineeringThe Hong Kong Polytechnic UniversityHung HomKowloonHong KongChina
| | - Ai Qun Liu
- School of Electrical and Electronic EngineeringNanyang Technological UniversitySingapore639798Singapore
| |
Collapse
|
45
|
Barberi J, Spriano S. Titanium and Protein Adsorption: An Overview of Mechanisms and Effects of Surface Features. Materials (Basel) 2021; 14:1590. [PMID: 33805137 PMCID: PMC8037091 DOI: 10.3390/ma14071590] [Citation(s) in RCA: 53] [Impact Index Per Article: 17.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/05/2021] [Revised: 03/09/2021] [Accepted: 03/19/2021] [Indexed: 12/14/2022]
Abstract
Titanium and its alloys, specially Ti6Al4V, are among the most employed materials in orthopedic and dental implants. Cells response and osseointegration of implant devices are strongly dependent on the body-biomaterial interface zone. This interface is mainly defined by proteins: They adsorb immediately after implantation from blood and biological fluids, forming a layer on implant surfaces. Therefore, it is of utmost importance to understand which features of biomaterials surfaces influence formation of the protein layer and how to guide it. In this paper, relevant literature of the last 15 years about protein adsorption on titanium-based materials is reviewed. How the surface characteristics affect protein adsorption is investigated, aiming to provide an as comprehensive a picture as possible of adsorption mechanisms and type of chemical bonding with the surface, as well as of the characterization techniques effectively applied to model and real implant surfaces. Surface free energy, charge, microroughness, and hydroxylation degree have been found to be the main surface parameters to affect the amount of adsorbed proteins. On the other hand, the conformation of adsorbed proteins is mainly dictated by the protein structure, surface topography at the nano-scale, and exposed functional groups. Protein adsorption on titanium surfaces still needs further clarification, in particular concerning adsorption from complex protein solutions. In addition, characterization techniques to investigate and compare the different aspects of protein adsorption on different surfaces (in terms of roughness and chemistry) shall be developed.
Collapse
Affiliation(s)
- Jacopo Barberi
- Department of Applied Science and Technology, Politecnico di Torino, 10129 Turin, Italy;
| | | |
Collapse
|
46
|
Skowrońska J, Kosucki A, Stawiński Ł. Overview of Materials Used for the Basic Elements of Hydraulic Actuators and Sealing Systems and Their Surfaces Modification Methods. Materials (Basel) 2021; 14:1422. [PMID: 33804082 DOI: 10.3390/ma14061422] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/02/2021] [Revised: 03/08/2021] [Accepted: 03/10/2021] [Indexed: 11/29/2022]
Abstract
The article is an overview of various materials used in power hydraulics for basic hydraulic actuators components such as cylinders, cylinder caps, pistons, piston rods, glands, and sealing systems. The aim of this review is to systematize the state of the art in the field of materials and surface modification methods used in the production of actuators. The paper discusses the requirements for the elements of actuators and analyzes the existing literature in terms of appearing failures and damages. The most frequently applied materials used in power hydraulics are described, and various surface modifications of the discussed elements, which are aimed at improving the operating parameters of actuators, are presented. The most frequently used materials for actuators elements are iron alloys. However, due to rising ecological requirements, there is a tendency to looking for modern replacements to obtain the same or even better mechanical or tribological parameters. Sealing systems are manufactured mainly from thermoplastic or elastomeric polymers, which are characterized by low friction and ensure the best possible interaction of seals with the cooperating element. In the field of surface modification, among others, the issue of chromium plating of piston rods has been discussed, which, due, to the toxicity of hexavalent chromium, should be replaced by other methods of improving surface properties.
Collapse
|
47
|
Sousa HBA, Martins CSM, Prior JAV. You Don't Learn That in School: An Updated Practical Guide to Carbon Quantum Dots. Nanomaterials (Basel) 2021; 11:611. [PMID: 33804394 PMCID: PMC7998311 DOI: 10.3390/nano11030611] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/25/2021] [Revised: 02/15/2021] [Accepted: 02/22/2021] [Indexed: 12/25/2022]
Abstract
Carbon quantum dots (CQDs) have started to emerge as candidates for application in cell imaging, biosensing, and targeted drug delivery, amongst other research fields, due to their unique properties. Those applications are possible as the CQDs exhibit tunable fluorescence, biocompatibility, and a versatile surface. This review aims to summarize the recent development in the field of CQDs research, namely the latest synthesis progress concerning materials/methods, surface modifications, characterization methods, and purification techniques. Furthermore, this work will systematically explore the several applications CQDs have been subjected to, such as bioimaging, fluorescence sensing, and cancer/gene therapy. Finally, we will briefly discuss in the concluding section the present and future challenges, as well as future perspectives and views regarding the emerging paradigm that is the CQDs research field.
Collapse
Affiliation(s)
| | | | - João A. V. Prior
- LAQV, REQUIMTE, Laboratory of Applied Chemistry, Department of Chemical Sciences, Faculty of Pharmacy, University of Porto, Rua de Jorge Viterbo Ferreira n. 228, 4050-313 Porto, Portugal; (H.B.A.S.); (C.S.M.M.)
| |
Collapse
|
48
|
Qin L, Yao S, Zhao J, Zhou C, Oates TW, Weir MD, Wu J, Xu HHK. Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations. Materials (Basel) 2021; 14:408. [PMID: 33467576 DOI: 10.3390/ma14020408] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/19/2020] [Revised: 01/10/2021] [Accepted: 01/12/2021] [Indexed: 12/15/2022]
Abstract
Polyetheretherketone (PEEK) is an important high-performance thermoplastic. Its excellent strength, stiffness, toughness, fatigue resistance, biocompatibility, chemical stability and radiolucency have made PEEK attractive in dental and orthopedic applications. However, PEEK has an inherently hydrophobic and chemically inert surface, which has restricted its widespread use in clinical applications, especially in bonding with dental resin composites. Cutting edge research on novel methods to improve PEEK applications in dentistry, including oral implant, prosthodontics and orthodontics, is reviewed in this article. In addition, this article also discusses innovative surface modifications of PEEK, which are a focus area of active investigations. Furthermore, this article also discusses the necessary future studies and clinical trials for the use of PEEK in the human oral environment to investigate its feasibility and long-term performance.
Collapse
|
49
|
Zwawi M. A Review on Natural Fiber Bio-Composites, Surface Modifications and Applications. Molecules 2021; 26:E404. [PMID: 33466725 DOI: 10.3390/molecules26020404] [Citation(s) in RCA: 35] [Impact Index Per Article: 11.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/02/2020] [Revised: 01/09/2021] [Accepted: 01/11/2021] [Indexed: 12/21/2022] Open
Abstract
Increased environmental concerns and global warming have diverted focus from eco-friendly bio-composites. Naturals fibers are abundant and have low harvesting costs with adequate mechanical properties. Hazards of synthetic fibers, recycling issues, and toxic byproducts are the main driving factors in the research and development of bio-composites. Bio-composites are degradable, renewable, non-abrasive, and non-toxic, with comparable properties to those of synthetic fiber composites and used in many applications in various fields. A detailed analysis is carried out in this review paper to discuss developments in bio-composites. The review covers structure, morphology, and modifications of fiber, mechanical properties, degradable matrix materials, applications, and limitations of bio-composites. Some of the key sectors employing bio-composites are the construction, automobile, and packaging industries. Furthermore, bio-composites are used in the field of medicine and cosmetics.
Collapse
|
50
|
Chai JM, Amelia TSM, Mouriya GK, Bhubalan K, Amirul AA, Vigneswari S, Ramakrishna S. Surface-Modified Highly Biocompatible Bacterial-poly(3-hydroxybutyrate- co-4-hydroxybutyrate): A Review on the Promising Next-Generation Biomaterial. Polymers (Basel) 2020; 13:E51. [PMID: 33375622 DOI: 10.3390/polym13010051] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/30/2020] [Revised: 12/20/2020] [Accepted: 12/21/2020] [Indexed: 02/01/2023] Open
Abstract
Polyhydroxyalkanoates (PHAs) are bacteria derived bio-based polymers that are synthesised under limited conditions of nutritional elements with excess carbon sources. Among the members of PHAs, poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [(P(3HB-co-4HB)] emerges as an attractive biomaterial to be applied in medical applications owing to its desirable mechanical and physical properties, non-genotoxicity and biocompatibility eliciting appropriate host tissue responses. The tailorable physical and chemical properties and easy surface functionalisation of P(3HB-co-4HB) increase its practicality to be developed as functional medical substitutes. However, its applicability is sometimes limited due to its hydrophobic nature due to fewer bio-recognition sites. In this review, we demonstrate how surface modifications of PHAs, mainly P(3HB-co-4HB), will overcome these limitations and facilitate their use in diverse medical applications. The integration of nanotechnology has drastically enhanced the functionality of P(3HB-co-4HB) biomaterials for application in complex biological environments of the human body. The design of versatile P(3HB-co-4HB) materials with surface modifications promise a non-cytotoxic and biocompatible material without inducing severe inflammatory responses for enhanced effective alternatives in healthcare biotechnology. The enticing work carried out with P(3HB-co-4HB) promises to be one of the next-generation materials in biomedicines which will facilitate translation into the clinic in the future.
Collapse
|