Inhibition of multi-species oral biofilm by bromide doped bioactive glass

Tailoring of bioactive glass and glass-ceramics properties for in vitro and in vivo response optimization: a review

Bioactive glasses are inorganic biocompatible materials that can find applications in many biomedical fields. The main application is bone and dental tissue engineering. However, some applications in contact with soft tissues are emerging. It is well known that both bulk (such as composition) and surface properties (such as morphology and wettability) of an implanted material influence the response of cells in contact with the implant. This review aims to elucidate and compare the main strategies that are employed to modulate cell behavior in contact with bioactive glasses. The first part of this review is focused on the doping of bioactive glasses with ions and drugs, which can be incorporated into the bioceramic to impart several therapeutic properties, such as osteogenic, proangiogenic, or/and antibacterial ones. The second part of this review is devoted to the chemical functionalization of bioactive glasses using drugs, extra-cellular matrix proteins, vitamins, and polyphenols. In the third and final part, the physical modifications of the surfaces of bioactive glasses are reviewed. Both top-down (removing materials from the surface, for example using laser treatment and etching strategies) and bottom-up (depositing materials on the surface, for example through the deposition of coatings) strategies are discussed.

Interfacial adaptation of newly prepared nano-tricalcium silicate-58s bioactive glass-based endodontic sealer

Background

The sealer's interfacial adaptability is one of the critical factors for successful root canal therapy. This study evaluated and compared the interfacial adaptability of newly prepared nano-tricalcium silicate-58s bioactive glass-based endodontic sealer (C3 S-BG-P) to root dentin with two bioactive sealers Nishika Canal Sealer BG and BioRootTM RCS.

Methods

Thirty newly extracted single-rooted lower premolars were decoronated and instrumented. The roots were assigned to three groups: C3 S-BG-P, Nishika Canal Sealer BG, and BioRootTM RCS (n=10) and obturated with the single-cone method. Each root was sectioned horizontally to obtain three slices at 2, 5, and 10 mm from the apex. The width of the gaps at the sealer‒dentin interface from each section's mesial and distal sides was measured under a field emission scanning electron microscope (FESEM) at×1.0 using the Digimizer software program. One-way ANOVA and post hoc Tukey tests for multiple comparisons were used to interpret and analyze the collected data.

Results

The mean gap width at the sealer‒dentin interface of C3 S-BG-P and Nishika Canal Sealer BG was significantly less than that of BioRootTM RCS at all root sections (P≤0.05). However, the mean gap width at the sealer‒dentin interface of C3 S-BG-P was not significantly different from Nishika Canal Sealer BG (P>0.05). Moreover, there were greater interfacial gaps at the apical level than at the coronal level for all the tested sealers.

Conclusion

C3 S-BG-P exhibited interfacial adaptation that was nearly comparable to Nishika Canal Sealer BG and superior to BioRootTM RCS.

Metal-doped silicate and phosphate glasses for antibacterial dental biomaterials

Owing to the development of glass 45S5 (Bioglass®) comprising 45 mol% SiO2, 24.5 mol% Na2O, 24.5 mol% CaO, and 6 mol% P2O5, different compositions of silicate glasses have been developed. When these silicate glasses contact an aqueous environment, such as body fluids, they induce apatite layer formation on their surfaces owing to ion exchange. In addition to promoting hard tissue formation, researchers have sought to enhance the antibacterial properties of these glasses, thereby resulting in the development of metal-doped silicate glasses. The addition of antibacterial metals (silver, copper, zinc, and gallium) to silicate glass offers a promising avenue for combating oral pathogens. In recent years, there has been growing interest in metal-doped phosphate glasses. The release of metal ions can be regulated by modifying the dissolution rate of the phosphate glasses. This review summarizes the metal-doped silicate and phosphate glasses that confer antibacterial activity. Future strategies for the development of dental biomaterials that incorporate metal-doped glass and exhibit antibacterial effects are discussed.

Physical-chemical properties and acellular bioactivity of newly prepared nano-tricalcium silicate-58s bioactive glass-based endodontic sealer

OBJECTIVES

To evaluate the physiochemical properties and apatite-forming ability of a newly prepared nano-tricalcium silicate-58s bioactive glass-based endodontic sealer (C3S-BG-P) and compare its results with the Nishika BG canal sealer and BioRoot™ RCS.

METHODS

The physicochemical properties (setting time, flow, solubility, film thickness, and radiopacity) of C3S-BG-P, Nishika BG canal sealer, and BioRoot™ RCS were evaluated in accordance with ANSI/ADA 57/2000 (reaffirmed 2012) and ISO 6876:2012 for root canal sealing materials. The in vitro apatite-forming ability was evaluated after 28 days of immersion of disc-shaped specimens in phosphate-buffered saline (PBS) using field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy.

RESULTS

The results of physiochemical tests indicated that all the tested sealers complied with the ADA and ISO standards; however, the solubility of the BioRoot did not meet the two standards. C3S-BG-P revealed significantly superior properties in all physicochemical tests compared to Nishika and BioRoot; however, the solubility of Nishika was significantly lower than that of C3S-BG-P. Furthermore, all tested sealers exhibited apatite precipitation on their surfaces after 28 days of immersion in PBS.

CONCLUSIONS

C3S-BG-P had superior physicochemical properties, which mitigated the disadvantages of calcium silicate-based sealers. Moreover, it exhibited apatite precipitation after immersion in PBS. Further in vivo studies utilizing animal models or clinical studies are necessary to support the rationale of the newly developed sealer for clinical application.

Dual-functional composite scaffolds for inhibiting infection and promoting bone regeneration

The treatment of infected bone defects is an intractable problem in orthopedics. It comprises two critical parts, namely that of infection control and bone defect repair. According to these two core tasks during treatment, the ideal approach of simultaneously controlling infection and repairing bone defects is promising treatment strategy. Several engineered biomaterials and drug delivery systems with dual functions of anti-bacterial action and ostogenesis-promotion have been developed and demonstrated excellent therapeutic effects. Compared with the conventional treatment method, the dual-functional composite scaffold can provide one-stage treatment avoiding multiple surgeries, thereby remarkably simplifying the treatment process and reducing the treatment time, overcoming the disadvantages of conventional bone transplantation. In this review, the impaired bone repair ability and its specific mechanisms in the microenvironment of pathogen infection and excessive inflammation were analyzed, providing a theoretical basis for the treatment of infectious bone defects. Furthermore, we discussed the composite dual-functional scaffold composed of a combination of antibacterial and osteogenic material. Finally, a series of advanced drug delivery systems with antibacterial and bone-promoting capabilities were summarized and discussed. This review provides a comprehensive understanding for the microenvironment of infectious bone defects and leading-edge design strategies for the antibacterial and bone-promoting dual-function scaffold, thus providing clinically significant treatment methods for infectious bone defects.

•

Antibacterial and bone-promoting dual-function scaffolds are ideal strategies for treatment of infectious bone defects.

•

The effect of infection on bone repair was summarized in detail from four important aspects.

•

A variety of dual-function scaffolds based on antibacterial and osteogenic materials were discussed.

•

Dual-function drug delivery systems promoting repair of infectious bone defects by locally releasing functional agents.

•

Leading-edge design strategies, challenges and prospects for dual-functional biomaterials were provided.

Antimicrobial and Antibiofilm Activities of 4,5-Dihydro-1H-pyrazole-1-carboximidamide Hydrochloride against Salmonella spp

In the present study, the antimicrobial and antibiofilm activities of two 4,5-dihydro-1H-pyrazole-1-carboximidamide hydrochloride, (trifluoromethyl) phenyl-substituted (compound 1) and bromophenyl-substituted (compound 2), were evaluated against four Salmonella spp. serotypes through broth microdilution and biofilm-forming activity. Further, the cytotoxicity of the compounds was evaluated by cell viability assays using cultures of HeLa and Vero cell lines, and the mutagenic potential was assessed by the Ames test. In the broth microdilution test, compound 1 inhibited 90% of the strains tested at the minimum inhibitory concentration of 62.5 μg mL−1. Furthermore, both compounds prevented biofilm formation, with a reduction of up to 5.2 log10. HeLa and Vero cells exhibited 100% viability in the presence of compound 1. In contrast, low cell viability was observed in the presence of 15 µg mL−1 of compound 2. Furthermore, no mutagenic potential was detected at any of the tested concentrations of compound 1.

Antibiofilm effects of titanium surfaces modified by laser texturing and hot-pressing sintering with silver

Peri-implant diseases are one of the main causes of dental implant failure. New strategies for dental implants manufacturing have been developed to prevent the accumulation of bacteria and related inflammatory reactions. The main aim of this work was to develop laser-treated titanium surfaces covered with silver that generate a electrical dipole to inhibit the oral bacteria accumulation. Two approaches were developed for that purpose. In one approach a pattern of different titanium dioxide thickness was produced on the titanium surface, using a Q-Switched Nd:YAG laser system operating at 1064 nm. The second approach was to incorporate silver particles on a laser textured titanium surface. The incorporation of the silver was performed by laser sintering and hot-pressing approaches. The anti-biofilm effect of the discs were tested against biofilms involving 14 different bacterial strains growth for 24 and 72 hr. The morphological aspects of the surfaces were evaluated by optical and field emission guns scanning electronical microscopy (FEGSEM) and therefore the wettability and roughness were also assessed. Physicochemical analyses revealed that the test surfaces were hydrophilic and moderately rough. The oxidized titanium surfaces showed no signs of antibacterial effects when compared to polished discs. However, the discs with silver revealed a decrease of accumulation of Porphyromonas gingivalis and Prevotella intermedia strains. Thus, the combination of Nd:YAG laser irradiation and hot-pressing was effective to produce silver-based patterns on titanium surfaces to inhibit the growth of pathogenic bacterial species. The laser parameters can be optimized to achieve different patterns, roughness, and thickness of the modified titanium layer regarding the type and region of the implant.

Cognizing the crystallization aspects of NaCaPO4 concomitant 53S bioactive-structures and their imprints in in vitro bio-mineralization

Compositional and bio-physico-chemical characteristic features of bioactive glasses are of great importance in biomedical field.

In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair

Bone defects resulting from infections, tumors, or traumas represent a major health care issue. Tissue engineering has been working togehter with medicine to develop techniques to repair bone damage and increase patient's life quality. In that context, scaffolds composed of bioactive ceramics have been explored, although their poor mechanical properties restrain their clinical applications as highly porous structures. As an alternative solution, this study aimed to evaluate the mechanical properties and biological response of novel zirconia reinforced bioactive glass scaffolds (ZRBG) manufactured by the replica method. The microstructure, chemical composition, compressive strength, density, in-vitro bioactivity, and cell viability were analyzed and compared to scaffolds made of monolithic zirconia of similar architecture (45, 60 and 85 ppi). The microstructure of ZRGB scaffolds consisted of a bioactive glass matrix with dispersed zirconia particles (~33% glassy phase) and the compressive strength values (ZRBG scaffolds: 0.33 ± 0.11, 0.41 ± 0.20 and 0.48 ± 0.6 MPa; ZRBG scaffolds with extra BG coating: 0.38 ± 0.13, 0.45 ± 0.11 and 0.50 ± 0.14 MPa for 45, 60 and 80 ppi, respectively) were not statistically different from those of zirconia scaffolds (0.25 ± 0.14 MPa for 45 ppi, 0.32 ± 0.11 MPa for 60 ppi and 0.44 ± 0.07 MPa for 80 ppi). No bioactivity was exhibited by monolithic zirconia scaffolds while significant bioactive response was found for ZRBG scaffolds. The cell viability of ZRBG scaffolds in osteogenic medium was improved up to 171% over zirconia scaffolds. This work provides promosing results for further exploring this technique for implant dentistry.

Nanointeraction: The profound influence of nanostructured and nano-drug delivery biomedical implant surfaces on cell behavior

Nanostructured surfaces feature promising biological properties on biomaterials attracting large interest at basic research, implant industry development, and bioengineering applications. Thou, nanoscale interactions at a molecular and cellular level are not yet completely understood and its biological and clinical implications need to be further elucidated. As follows, the aim of this comprehensive review was to evaluate nanostructured surfaces at biomedical implants focusing on surface development, nanostructuration, and nanoengineered drug delivery systems that can induce specific cell interactions in all relevant aspects of biological, reparative, anti-bacterial, anti-inflammatory and clinical processes. The methods and the physio-chemical properties involved in nanotopography performance, the main cellular characteristics involved at surface/cell interaction, and a summary of results and outlooks reported in studies applying nanostructured surfaces and nano-drug delivery systems is presented. The future prospects and commercial translation of this developing field, particularly concerning multifunctional nanostructured surfaces and its clinical implications are further discussed. At a cellular level, nanostructured biomedical implant surfaces can enhance osteogenesis by targeting osteoblasts, osteocytes, and mesenchymal cells, stimulate fibroblast/epithelial cells proliferation and adherence, inhibit bacterial cell proliferation and biofilm accumulation, and act as immune-modulating surfaces targeting macrophages and reducing pro-inflammatory cytokine expression. Moreover, several methodological options to create drug-delivery systems on metallic implant surfaces are available, however, the clinical translation is yet incomplete. The efficiency of which nanostructured/nano-delivery surfaces may target specific cell interactions and favor clinical outcomes needs to be further elucidated in pre-clinical and clinical studies, along with engineering solutions for commercial translation and approval of controlling agencies.

Nanostructured Materials for Artificial Tissue Replacements

This paper review current trends in applications of nanomaterials in tissue engineering. Nanomaterials applicable in this area can be divided into two groups: organic and inorganic. Organic nanomaterials are especially used for the preparation of highly porous scaffolds for cell cultivation and are represented by polymeric nanofibers. Inorganic nanomaterials are implemented as they stand or dispersed in matrices promoting their functional properties while preserving high level of biocompatibility. They are used in various forms (e.g., nano- particles, -tubes and -fibers)-and when forming the composites with organic matrices-are able to enhance many resulting properties (biologic, mechanical, electrical and/or antibacterial). For this reason, this contribution points especially to such type of composite nanomaterials. Basic information on classification, properties and application potential of single nanostructures, as well as complex scaffolds suitable for 3D tissues reconstruction is provided. Examples of practical usage of these structures are demonstrated on cartilage, bone, neural, cardiac and skin tissue regeneration and replacements. Nanomaterials open up new ways of treatments in almost all areas of current tissue regeneration, especially in tissue support or cell proliferation and growth. They significantly promote tissue rebuilding by direct replacement of damaged tissues.

Acidity-induced release of zinc ion from BioUnionTM filler and its inhibitory effects against Streptococcus mutans

BioUnion filler incorporated into restorative/coating materials is a new bio-functional glass powder. The most unique function of BioUnion filler is its ability to release Zn²⁺ in acidic environments. In this study, the ion release profile of BioUnion filler under acidic conditions and its antibacterial effects against Streptococcus mutans were evaluated. The concentrations of Zn²⁺ released from BioUnion fillers into acetic acids were greater than those released into water. S. mutans inhibition by BioUnion fillers was greater with sucrose than without sucrose, reflecting a decrease in suspension pH in response to the addition of sucrose. Exposure to acids increased Zn²⁺ release from BioUnion fillers, and the fillers after repeated exposure to acids demonstrated inhibitory effects against S. mutans. These findings suggest that BioUnion filler accelerated the release of Zn²⁺ under acidic conditions, which induced bactericidal/inhibitory effects against S. mutans.

Two to six-year disease resolution and marginal bone stability rates of a modified resective-implantoplasty therapy in 32 peri-implantitis cases

BACKGROUND

Different nonsurgical, antibacterial, surgical, and regenerative approaches to treat peri-implantitis have been proposed, but there is no an actual "gold" standard treatment showing the most favorable results to counteract peri-implantitis effects.

PURPOSE

To evaluate radiographically and clinically the disease resolution and peri-implant marginal bone stability rates of peri-implantitis cases treated through a combined resective-implantoplasty therapy in a moderate to long-term period.

MATERIALS AND METHODS

Records of patients diagnosed with peri-implantitis and treated through the same protocol applying a combined resective-implantoplasty therapy with minimum 2-year follow-up were screened. Eligible patients were contacted and asked to undergo clinical and radiologic examination. Progressive marginal bone loss, bleeding on probing, suppuration, implant mobility, and implant fracture were considered to establish the disease resolution rate and peri-implant bone stability of the treated implants.

RESULTS

Twenty-three patients with 32 treated implants fulfilled the inclusion criteria. Over the 2 to 6-year follow-up, (mean time: 3.4 ± 1.5 years), the disease resolution rate was 83% (patient level) and 87% (implant level). Four implants (13%) were lost or removed due to continuous MBL and osseointegration failure. At follow-up, peri-implant marginal bone remained stable with no further bone loss in 87% of the treated implants. BOP was absent in 89.3% (implant level), suppuration was resolved in all cases, and no pain or implant fracture was reported.

CONCLUSION

Implantoplasty treated cases showed high disease resolution rate and peri-implant marginal bone stability. This surgical antibiofilm strategy can counteract peri-implantitis progression providing an adequate environment for implant function and longevity over a moderate to long-term period.

Production and characterization of zirconia structures with a porous surface

The aim of this study was to produce zirconia structures with a porous surface by the dip coating technique and assess the mechanical properties of the structures as well as the integrity of the porous layers. Surface porous layers with homogenous and graded porosity were produced over zirconia substrate discs using zirconia powders with different average sizes (d₅₀ = 40 μm; d₅₀ = 70 μm and d₅₀ = 100 μm) and without pore forming fugitive phases. Specimens were inspected using Scanning Electron Microscopy. Bending strength of specimens was obtained from biaxial flexural tests (B3B). Porous layers were successfully produced on zirconia discs substrates and the bending strength of these specimens were ~35% lower than uncoated specimens. Delamination occurred especially in layers with higher thickness and made of bigger particles. Practical application examples were provided in this paper showing the versatility of these porous surfaces in the production of multifunctional surfaces for stronger interfaces.

The Anti-biofilm Activity of Nanometric Zinc doped Bioactive Glass against Putative Periodontal Pathogens: An in vitro Study

Colonization of periodontal pathogens on the surgical sites is one of the primary reasons for the failure of regenerative periodontal therapies. Bioactive glasses (BGs) owing to their favorable structural and antimicrobial properties have been proposed as promising materials for the reconstruction of periodontal and peri-implant bone defects. This study aimed to investigate the antibiofilm activity of zinc-doped BG (Zn/BG) compared with 45S5 Bioglass® (BG®) on putative periodontal pathogens. In this in vitro experimental study, the nano BG doped with 5-mol% zinc and BG® were synthesized by sol-gel method. Mono-species biofilms of Aggregatibacter actinomycetemcomitans (A. a), Porphyromonas gingivalis (P. g), and Prevotella intermedia (P. i)were prepared separately in a well-containing microplate. After 48 hours of exposure to generated materials at 37°C, the anti-biofilm potential of the samples was studied by measuring the optical density (OD) at 570nm wavelengths with a microplate reader. Two-way ANOVA then analyzed the results. Both Zn/BG and BG® significantly reduced the biofilm formation ability of all examined strains after 48 hours of incubation (P=0.0001). Moreover, the anti-biofilm activity of Zn/BG was significantly stronger than BG® (P=0.0001), which resulted in the formation of a weak biofilm (OD<1) compared with a moderately adhered biofilm observed with BG® (1<OD<2). Zn/BG showed a significant inhibitory effect on the biofilm formation of all examined periodontal pathogens. Given the enhanced regenerative and anti-biofilm properties of this novel biomaterial, further investigations are required for its implementation in clinical situations.

Physicochemical and biological assessment of PEEK composites embedding natural amorphous silica fibers for biomedical applications

The main aim of this study was to assess the physicochemical and biological properties of a novel poly(ether ether ketone) (PEEK) composite containing 30%wt natural amorphous silica fibers (NASF). PEEK and NASF powders were previously functionalized by atomization and citric acid in order to enhance adhesion between polymeric matrix and fillers. Then, composites were produced by cold compression molding technique at 350°C for 3h. Materials were characterized by chemical, microstructural, thermophysical, mechanical and cytotoxic analysis. The results of the mechanical assays showed that the incorporation fibers increased the elastic modulus of the resultant PEEK composite in 56% while its microhardness increased in 26.7%. Chemical and microscopic analyses detected a good interfacial adhesion between PEEK and NASF. The results of the cytotoxicity assays indicated that PEEK/NASF composites stimulated the metabolic activity of fibroblasts and therefore a high cytocompatibility was noticed. PEEK composites embedding natural amorphous silica fibers revealed a high potential to be used in medicine and dentistry replacing several polymeric and composite materials.