Polymer scaffold architecture is a key determinant in mast cell inflammatory and angiogenic responses

Electrospun meshes for abdominal wall hernia repair: Potential and challenges

Surgical meshes are widely used in abdominal wall hernia repairs. However, consensus on mesh treatment remains elusive due to varying repair outcomes, especially with the introduction of new meshes, posing a substantial challenge for surgeons. Addressing these issues requires communicating the features of emerging candidates with a focus on clinical considerations. Electrospinning is a versatile technique for producing meshes with biomechanical architectures that closely mimic the extracellular matrix and enable incorporation of bioactive and therapeutic agents into the interconnective porous network, providing a favorable milieu for tissue integration and remodeling. Although this promising technique has drawn considerable interest in mesh fabrication and functionalization, currently developed electrospun meshes have limitations in meeting clinical requirements for hernia repair. This review summarizes the advantages and limitations of meshes prepared through electrospinning based on biomechanical, biocompatible, and bioactive properties/functions, offering interdisciplinary insights into challenges and future directions toward clinical mesh-aided hernia repair. STATEMENT OF SIGNIFICANCE: Consensus for hernia treatments using surgical meshes remains elusive based on varying repair outcomes, presenting significant challenges for researchers and surgeons. Differences in understanding mesh between specialists, particularly regarding material characteristics and clinical requirements, contribute to this issue. Electrospinning has been increasingly applied in mesh preparation through various approaches and strategies, aiming to improve abdominal wall hernia by restoring mechanical, morphological and functional integrity. However, there is no comprehensive overview of these emerging meshes regarding their features, functions, and clinical potentials, emphasizing the necessity of interdisciplinary discussions on this topic that build upon recent developments in electrospun mesh and provide insights from clinically practical prospectives.

Advances in Nanomedicine and Biomaterials for Endometrial Regeneration: A Comprehensive Review

The endometrium is an extremely important component of the uterus and is crucial for individual health and human reproduction. However, traditional methods still struggle to ideally repair the structure and function of damaged endometrium and restore fertility. Therefore, seeking and developing innovative technologies and materials has the potential to repair and regenerate damaged or diseased endometrium. The emergence and functionalization of various nanomedicine and biomaterials, as well as the proposal and development of regenerative medicine and tissue engineering techniques, have brought great hope for solving these problems. In this review, we will summarize various nanomedicine, biomaterials, and innovative technologies that contribute to endometrial regeneration, including nanoscale exosomes, nanomaterials, stem cell-based materials, naturally sourced biomaterials, chemically synthesized biomaterials, approaches and methods for functionalizing biomaterials, as well as the application of revolutionary new technologies such as organoids, organ-on-chips, artificial intelligence, etc. The diverse design and modification of new biomaterials endow them with new functionalities, such as microstructure or nanostructure, mechanical properties, biological functions, and cellular microenvironment regulation. It will provide new options for the regeneration of endometrium, bring new hope for the reconstruction and recovery of patients' reproductive abilities.

Electrospun fiber-based immune engineering in regenerative medicine

Immune engineering, a burgeoning field within regenerative medicine, involves a spectrum of strategies to optimize the intricate interplay between tissue regenerative biomaterials and the host tissue. These strategies are applied across different types of biomaterials and various disease models, which encompasses finely modulating the immune response at the levels of immune cells and factors, aiming to mitigate adverse effects like fibrosis and persistent inflammation that may arise at the injury site and consequently promote tissue regeneration. With the continuous progress in electrospinning technology, the immunoregulatory capabilities of electrospun fibers have gained substantial attention over the years. Electrospun fibers, with their extracellular matrix-like characteristics, high surface-area-to-volume ratio, and reliable pharmaceutical compound capacity, have emerged as key players among tissue engineering materials. This review specifically focuses on the role of electrospun fiber-based immune engineering, emphasizing their unique design strategies. Notably, electrospinning actively engages in immune engineering by modulating immune responses through four essential strategies: (i) surface modification, (ii) drug loading, (iii) physicochemical parameters, and (iv) biological grafting. This review presents a comprehensive overview of the intricate mechanisms of the immune system in injured tissues while unveiling the key strategies adopted by electrospun fibers to orchestrate immune regulation. Furthermore, the review explores the current developmental trends and limitations concerning the immunoregulatory function of electrospun fibers, aiming to drive the advancements in electrospun fiber-based immune engineering to its full potential.

Tissue engineering modalities in skeletal muscles: focus on angiogenesis and immunomodulation properties

Muscular diseases and injuries are challenging issues in human medicine, resulting in physical disability. The advent of tissue engineering approaches has paved the way for the restoration and regeneration of injured muscle tissues along with available conventional therapies. Despite recent advances in the fabrication, synthesis, and application of hydrogels in terms of muscle tissue, there is a long way to find appropriate hydrogel types in patients with congenital and/or acquired musculoskeletal injuries. Regarding specific muscular tissue microenvironments, the applied hydrogels should provide a suitable platform for the activation of endogenous reparative mechanisms and concurrently deliver transplanting cells and therapeutics into the injured sites. Here, we aimed to highlight recent advances in muscle tissue engineering with a focus on recent strategies related to the regulation of vascularization and immune system response at the site of injury.

Modulation of Macrophage Function by Bioactive Wound Dressings with an Emphasis on Extracellular Matrix-Based Scaffolds and Nanofibrous Composites

Bioactive wound dressings that are capable of regulating the local wound microenvironment have attracted a very large interest in the field of regenerative medicine. Macrophages have many critical roles in normal wound healing, and the dysfunction of macrophages significantly contributes to impaired or non-healing skin wounds. Regulation of macrophage polarization towards an M2 phenotype provides a feasible strategy to enhance chronic wound healing, mainly by promoting the transition of chronic inflammation to the proliferation phase of wound healing, upregulating the level of anti-inflammatory cytokines around the wound area, and stimulating wound angiogenesis and re-epithelialization. Based on this, modulation of macrophage functions by the rational design of bioactive scaffolds has emerged as a promising way to accelerate delayed wound healing. This review outlines current strategies to regulate the response of macrophages using bioactive materials, with an emphasis on extracellular matrix-based scaffolds and nanofibrous composites.

Silk fibroin bioscaffold from Bombyx mori and Antheraea assamensis elicits a distinct host response and macrophage activation paradigm in vivo and in vitro

Biomaterials composed of silk fibroin from both mulberry and non-mulberry silkworm varieties have been investigated for their utility in tissue engineering and drug delivery, but these studies have largely excluded any evaluation of host immune response. The present study compares the macrophage activation response towards mulberry (Bombyx mori, BM) and non-mulberry (Antheraea assamensis, AA) silk types, individually and as a blend (BA) in a partial thickness rat abdominal wall defect model and in vitro primary murine bone marrow-derived macrophage (BMDM) assay. Biologic materials composed of liver extracellular matrix (LECM) and small intestinal submucosa (SIS) ECM that are recognized for constructive tissue remodeling, and polypropylene mesh that is associated with pro-inflammatory macrophage phenotype activation are used as controls in the animal model. The AA silk graft shows a host response similar to SIS with few foreign body multinucleate giant cells, vascularization, high CD206 expression, and high M2-like: M1-like macrophage phenotype ratio. Exposure to AA silk degradation products in vitro induces a higher arginase: iNOS ratio in both naive BMDM and pro-inflammatory activated BMDM; and higher Fizz1: iNOS ratio in pro-inflammatory activated BMDM. These data suggest that the AA silk supports a pro-remodeling macrophage response with potential therapeutic applications.

Correction of large jawbone defect in the mouse using immature osteoblast-like cells and a 3D polylactic acid scaffold

Bone tissue engineering has been developed using a combination of mesenchymal stem cells (MSCs) and calcium phosphate-based scaffolds. However, these complexes cannot regenerate large jawbone defects. To overcome this limitation of MSCs and ceramic scaffolds, a novel bone regeneration technology must be developed using cells possessing high bone forming ability and a scaffold that provides space for vertical bone augmentation. To approach this problem in our study, we developed alveolar bone-derived immature osteoblast-like cells (HAOBs), which have the bone regenerative capacity to correct a large bone defect when used as a grafting material in combination with polylactic acid fibers that organize the 3D structure and increase the strength of the scaffold material (3DPL). HAOB-3DPL constructs could not regenerate bone via xenogeneic transplantation in a micromini pig alveolar bone defect model. However, the autogenic transplantation of mouse calvaria-derived immature osteoblast-like cells (MCOBs) isolated using the identical protocol for HAOBs and mixed with 3DPL scaffolds successfully regenerated the bone in a large jawbone defect mouse model, compared to the 3DPL scaffold alone. Nanoindentation analysis indicated that the regenerated bone had a similar micromechanical strength to native bone. In addition, this MCOB-3DPL regenerated bone possesses osseointegration ability wherein a direct structural connection is established with the titanium implant surface. Hence, a complex formed between a 3DPL scaffold and immature osteoblast-like cells such as MCOBs represents a novel bone tissue engineering approach that enables the formation of vertical bone with the micromechanical properties required to treat large bone defects.

The Emerging Role of Immune Cells and Targeted Therapeutic Strategies in Diabetic Wounds Healing

Poor wound healing in individuals with diabetes has long plagued clinicians, and immune cells play key roles in the inflammation, proliferation and remodeling that occur in wound healing. When skin integrity is damaged, immune cells migrate to the wound bed through the actions of chemokines and jointly restore tissue homeostasis and barrier function by exerting their respective biological functions. An imbalance of immune cells often leads to ineffective and disordered inflammatory responses. Due to the maladjusted microenvironment, the wound is unable to smoothly transition to the proliferation and remodeling stage, causing it to develop into a chronic refractory wound. However, chronic refractory wounds consistently lead to negative outcomes, such as long treatment cycles, high hospitalization rates, high medical costs, high disability rates, high mortality rates, and many adverse consequences. Therefore, strategies that promote the rational distribution and coordinated development of immune cells during wound healing are very important for the treatment of diabetic wounds (DW). Here, we explored the following aspects by performing a literature review: 1) the current situation of DW and an introduction to the biological functions of immune cells; 2) the role of immune cells in DW; and 3) existing (or undeveloped) therapies targeting immune cells to promote wound healing to provide new ideas for basic research, clinical treatment and nursing of DW.

Tissue engineering application combining epoxidized natural rubber blend and mesenchymal stem cells in in vivo response

This study aimed to investigate biocompatibility, integration, and tissue host response of the Poly (Lactic-co-Glycolic acid) (PLGA)/Poly (isoprene) (PI) epoxidized (PLGA/PIepox) innovative scaffold combined with adipose derived mesenchymal stem cells (ADSC). We implanted the scaffold subcutaneously on the back of 18 female rats and monitored them for up to 14 days. When compared to controls, PLGA/PIepox + ADSC demonstrated an earlier vascularization, a tendency of inflammation reduction, an adequate tissue integration, higher cell proliferation, and a tendency of expression of collagen decreasing. However, 14 days post-implantation we found similar levels of CD31, Ki67 and AE1/AE3 in PLGA/PIepox when compared to control groups. The interesting results, lead us to the assumption that PLGA/PIepox is able to provide an effective delivery system for ADSC on tissue host. This animal study assesses PLGA/PIepox + ADSC in in vivo tissue functionality and validation of use, serving as a proof of concept for future clinical translation as it presents an innovative and promising tissue engineering opportunity for the use in tissue reconstruction.

Electrospun fiber-based strategies for controlling early innate immune cell responses: Towards immunomodulatory mesh designs that facilitate robust tissue repair

Electrospun fibrous meshes are widely used for tissue repair due to their ability to guide a host of cell responses including phenotypic differentiation and tissue maturation. A critical factor determining the eventual biological outcomes of mesh-based regeneration strategies is the early innate immune response following implantation. The natural healing process involves a sequence of tightly regulated, temporally varying and delicately balanced pro-/anti-inflammatory events which together promote mesh integration with host tissue. Matrix designs that do not account for the immune milieu can result in dysregulation, chronic inflammation and fibrous capsule formation, thus obliterating potential therapeutic outcomes. In this review, we provide systematic insights into the effects of specific fiber/mesh properties and mechanical stimulation on the responses of early innate immune modulators viz., neutrophils, monocytes and macrophages. We identify matrix characteristics that promote anti-inflammatory immune phenotypes, and we correlate such responses with pro-regenerative in vivo outcomes. We also discuss recent advances in 3D fabrication technologies, bioactive functionalization approaches and biomimetic/bioinspired immunomodulatory mesh design strategies for tissue repair and wound healing. The mechanobiological insights and immunoregulatory strategies discussed herein can help improve the translational outcomes of fiber-based regeneration and may also be leveraged for intervention in degenerative diseases associated with dysfunctional immune responses. STATEMENT OF SIGNIFICANCE: The crucial role played by immune cells in promoting biomaterial-based tissue regeneration is being increasingly recognized. In this review focusing on the interactions of innate immune cells (primarily neutrophils, monocytes and macrophages) with electrospun fibrous meshes, we systematically elucidate the effects of the fiber microenvironment and mechanical stimulation on biological responses, and build upon these insights to inform the rational design of immunomodulatory meshes for effective tissue repair. We discuss state-of-the-art fabrication methods and mechanobiological advances that permit the orchestration of temporally controlled phenotypic switches in immune cells during different phases of healing. The design strategies discussed herein can also be leveraged to target several complex autoimmune and inflammatory diseases.

Cell-Seeded Biomaterial Scaffolds: The Urgent Need for Unanswered Accelerated Angiogenesis

One of the most arduous challenges in tissue engineering is neovascularization, without which there is a lack of nutrients delivered to a target tissue. Angiogenesis should be completed at an optimal density and within an appropriate period of time to prevent cell necrosis. Failure to meet this challenge brings about poor functionality for the tissue in comparison with the native tissue, extensively reducing cell viability. Prior studies devoted to angiogenesis have provided researchers with some biomaterial scaffolds and cell choices for angiogenesis. For example, while most current angiogenesis approaches require a variety of stimulatory factors ranging from biomechanical to biomolecular to cellular, some other promising stimulatory factors have been underdeveloped (such as electrical, topographical, and magnetic). When it comes to choosing biomaterial scaffolds in tissue engineering for angiogenesis, key traits rush to mind including biocompatibility, appropriate physical and mechanical properties (adhesion strength, shear stress, and malleability), as well as identifying the appropriate biomaterial in terms of stability and degradation profile, all of which may leave essential trace materials behind adversely influencing angiogenesis. Nevertheless, the selection of the best biomaterial and cells still remains an area of hot dispute as such previous studies have not sufficiently classified, integrated, or compared approaches. To address the aforementioned need, this review article summarizes a variety of natural and synthetic scaffolds including hydrogels that support angiogenesis. Furthermore, we review a variety of cell sources utilized for cell seeding and influential factors used for angiogenesis with a concentrated focus on biomechanical factors, with unique stimulatory factors. Lastly, we provide a bottom-to-up overview of angiogenic biomaterials and cell selection, highlighting parameters that need to be addressed in future studies.

Pro-angiogenic approach for skeletal muscle regeneration

The angiogenesis process is a phenomenon in which numerous molecules participate in the stimulation of the new vessels' formation from pre-existing vessels. Angiogenesis is a crucial step in tissue regeneration and recovery of organ and tissue function. Muscle diseases affect millions of people worldwide overcome the ability of skeletal muscle to self-repair. Pro-angiogenic therapies are key in skeletal muscle regeneration where both myogenesis and angiogenesis occur. These therapies have been based on mesenchymal stem cells (MSCs), exosomes, microRNAs (miRs) and delivery of biological factors. The use of different calls of biomaterials is another approach, including ceramics, composites, and polymers. Natural polymers are use due its bioactivity and biocompatibility in addition to its use as scaffolds and in drug delivery systems. One of these polymers is the natural rubber latex (NRL) which is biocompatible, bioactive, versatile, low-costing, and capable of promoting tissue regeneration and angiogenesis. In this review, the advances in the field of pro-angiogenic therapies are discussed.

Evaluation of Polycaprolactone Electrospun Nanofiber-Composites for Artificial Skin Based on Dermal Fibroblast Culture

The study’s aim was to develop a dermal equivalent scaffold that can mimic the architecture and biological performance of the human dermis. Poly ε-caprolactone (PCL) electrospun nanofiber material (ENF) was assembled with polyethylene glycol diacrylate (PEGDA), sodium alginate (SA) and type I collagen (CG1) to develop three groups of dermal equivalent scaffolds. These scaffolds were named PEGDA-PCL, SA-PCL and CG1-PCL. Scanning electron microscopy (SEM) images of cell-free scaffolds’ top and cross-sectional surface were collected and analyzed to examine internal morphology, specifically the adhesiveness of PCL fibers with the different scaffolds. Human dermal fibroblasts were cultured on each of the scaffolds. Cell viability studies including cell adhesion, cell differentiation and stress fiber production were conducted on each scaffold. Furthermore, the architectural integrity of each scaffold was verified by degradation analysis for 2 weeks by soaking each scaffold in phosphate-buffered saline (PBS) solution. Finally, we conducted rheological characteristics of each scaffold. Based on our results from the above analysis, the study concluded that CG1-PCL is best suitable for the dermal equivalent model and has potential to be used as a graft for skin repair.

The role of biomaterials and scaffolds in immune responses in regenerative medicine: macrophage phenotype modulation by biomaterial properties and scaffold architectures

Scaffolds are an integral part of the regenerative medicine field. The contact of biomaterials with tissue, as was clearly observed over the years, induces immune reactions in a material and patient specific manner, where both surface and bulk properties of scaffolds, together with their 3D architecture, have a significant influence on the outcome. This review presents an overview of the reactions to the biomaterials with a specific focus on clinical complications with the implants in the context of immune reactions and an overview of the studies involving biomaterial properties and interactions with innate immune system cells. We emphasize the impact of these studies on scaffold selection and upscaling of microenvironments created by biomaterials from 2D to 3D using immune cell encapsulation, seeding in a 3D scaffold and co-culture with relevant tissue cells. 3D microenvironments are covered with a specific focus on innate cells since a large proportion of these studies used innate immune cells. Finally, the recent studies on the incorporation of adaptive immune cells in immunomodulatory systems are covered in this review. Biomaterial-immune cell interactions are a critical part of regenerative medicine applications. Current efforts in establishing the ground rules for such interactions following implantation can control immune response during all phases of inflammation. Thus, in the near future for complete functional recovery, tissue engineering and control over biomaterials must be considered at the first step of immune modulation and this review covers these interactions, which have remained elusive up to now.

Mast Cell-Biomaterial Interactions and Tissue Repair

Tissue engineers often use biomaterials to provide structural support along with mechanical and chemical signals to modulate the wound healing process. Biomaterials that are implanted into the body interact with a heterogeneous and dynamic inflammatory environment that is present at the site of injury. Whether synthetically derived, naturally derived, or a combination of both, it is important to assess biomaterials for their ability to modulate inflammation to understand their potential clinical use. One important, but underexplored cell in the context of biomaterials is the mast cell (MC). MCs are granulocytic leukocytes that engage in a variety of events in both the innate and adaptive immune systems. Although highly recognized for their roles in allergic reactions, MCs play an important role in wound healing by recognizing antigens through pattern recognition receptors and the high-affinity immunoglobulin E receptor (FceRI) and releasing granules that affect cell recruitment, fibrosis, extracellular matrix deposition, angiogenesis, and vasculogenesis. MCs also mediate the foreign body response, contributing to the incorporation or rejection of implants. Studies of MC-biomaterial interactions can aid in the elucidation of MC roles during the host tissue response and tissue repair. This review is designed for those in the tissue engineering and biomaterial fields who are interested in exploring the role MCs may play in wound-biomaterial interactions and wound healing. With this review, we hope to inspire more research in the MC-biomaterial space to accelerate the design and construction of optimized implants. Impact statement Mast cells (MCs) are highly specialized inflammatory cells that have crucial, but not fully understood, roles in wound healing and tissue repair. Upon stimulation, they recognize foreign antigens and release granules that help orchestrate the inflammatory response after tissue damage or biomaterial implantation. This review summarizes the current use of MCs in biomaterial research along with literature from the past decade focusing on MC interactions with materials used for tissue repair and regeneration. Studying MC-biomaterial interactions will help (i) further understand the process of inflammation and (ii) design biomaterials and tissue-engineered constructs for optimal repair and regeneration.

Control of innate immune response by biomaterial surface topography, energy, and stiffness

As the focus of implantable biomaterials has shifted from bioinert implants to bioactive designs, recent research has highlighted the complex interactions between cell physiologic systems and material properties, particularly physical cues. From the cells known to interact with implanted biomaterials, the response of the immune system has been a critical target of study recently. Here, we review studies characterizing the response of innate immune cells to various material cues, particularly of those at the surface of implanted materials.The innate immune system consists of cell types with various roles in inflammation. Neutrophils and macrophages serve both phagocytic and signaling roles, especially early in the inflammatory phase of biomaterial implantation. These cell types ultimately dictate the outcome of implants as chronic inflammation, fibrosis, or integration. Other cell types like dendritic cells, mast cells, natural killer cells, and innate lymphoid cells may also serve an immunomodulatory role in the biomaterial context. This review highlights recent advances in our understanding of the role of innate immunity in the response to implantable biomaterials as well as key mechanobiological findings in innate immune cells underpinning these advances. STATEMENT OF SIGNIFICANCE: This review highlights recent advances in the understanding of the role of innate immunity in the response to implantable biomaterials, especially in neutrophils and macrophages, as well as key mechanobiological findings in innate immune cells underpinning these advances. Here we discuss how physicochemical properties of biomaterials control innate immune cell behavior.

Biomaterials strategies to balance inflammation and tenogenesis for tendon repair

Adult tendon tissue demonstrates a limited regenerative capacity, and the natural repair process leaves fibrotic scar tissue with inferior mechanical properties. Surgical treatment is insufficient to provide the mechanical, structural, and biochemical environment necessary to restore functional tissue. While numerous strategies including biodegradable scaffolds, bioactive factor delivery, and cell-based therapies have been investigated, most studies have focused exclusively on either suppressing inflammation or promoting tenogenesis, which includes tenocyte proliferation, ECM production, and tissue formation. New biomaterials-based approaches represent an opportunity to more effectively balance the two processes and improve regenerative outcomes from tendon injuries. Biomaterials applications that have been explored for tendon regeneration include formation of biodegradable scaffolds presenting topographical, mechanical, and/or immunomodulatory cues conducive to tendon repair; delivery of immunomodulatory or tenogenic biomolecules; and delivery of therapeutic cells such as tenocytes and stem cells. In this review, we provide the biological context for the challenges in tendon repair, discuss biomaterials approaches to modulate the immune and regenerative environment during the healing process, and consider the future development of comprehensive biomaterials-based strategies that can better restore the function of injured tendon. STATEMENT OF SIGNIFICANCE: Current strategies for tendon repair focus on suppressing inflammation or enhancing tenogenesis. Evidence indicates that regulated inflammation is beneficial to tendon healing and that excessive tissue remodeling can cause fibrosis. Thus, it is necessary to adopt an approach that balances the benefits of regulated inflammation and tenogenesis. By reviewing potential treatments involving biodegradable scaffolds, biological cues, and therapeutic cells, we contrast how each strategy promotes or suppresses specific repair steps to improve the healing outcome, and highlight the advantages of a comprehensive approach that facilitates the clearance of necrotic tissue and recruitment of cells during the inflammatory stage, followed by ECM synthesis and organization in the proliferative and remodeling stages with the goal of restoring function to the tendon.

Oxidative stress in pancreatic alpha and beta cells as a selection criterion for biocompatible biomaterials

The clinical success rate of islet transplantation, namely independence from insulin injections, is limited by factors that lead to graft failure, including inflammation, acute ischemia, acute phase response, and insufficient vascularization. The ischemia and insufficient vascularization both lead to high levels of oxidative stress, which are further aggravated by islet encapsulation, inflammation, and undesirable cell-biomaterial interactions. To identify biomaterials that would not further increase damaging oxidative stress levels and that are also suitable for manufacturing a beta cell encapsulation device, we studied five clinically approved polymers for their effect on oxidative stress and islet (alpha and beta cell) function. We found that 300 poly(ethylene oxide terephthalate) 55/poly(butylene terephthalate) 45 (PEOT/PBT300) was more resistant to breakage and more elastic than other biomaterials, which is important for its immunoprotective function. In addition, it did not induce oxidative stress or reduce viability in the MIN6 beta cell line, and even promoted protective endogenous antioxidant expression over 7 days. Importantly, PEOT/PBT300 is one of the biomaterials we studied that did not interfere with insulin secretion in human islets.

Electrospun Fibres with Hyaluronic Acid-Chitosan Nanoparticles Produced by a Portable Device

Electrospinning is a versatile technique to produce nano/microscale fibrous scaffolds for tissue engineering and drug delivery applications. This research aims to demonstrate that hyaluronic acid-chitosan (HA-CS) nanoparticles can be electrospun together with polycaprolactone (PCL) and gelatine (Ge) fibres using a portable device to create scaffolds for tissue repair. A range of polymer solutions of PCL-gelatine at different weight/volume concentrations and ratios were electrospun and characterised. Fibre–cell interaction (F11 cells) was evaluated based on cell viability and proliferation and, from here, a few polymer blends were electrospun into random or aligned fibre arrangements. HA-CS nanoparticles were synthesised, characterised, and used to functionalise electrospun fibres (8% w/v at 70 PCL:30 Ge), which were chosen based on cell viability. Different concentrations of HA-CS nanoparticles were tested to determine cytotoxicity. A single dosage (1 × 10⁻² mg/mL) was associated with higher cell proliferation compared with the cell-only control. This nanoparticle concentration was embedded into the electrospun fibres as either surface modification or blend. Fibres with blended NPs delivered a higher cell viability than unmodified fibres, while NP-coated fibres resulted in a higher cell proliferation (72 h) than the NP-blended ones. These biocompatible scaffolds allow cell attachment, maintain fibre arrangement, promote directional growth and yield higher cell viability.

A scaffold laden with mesenchymal stem cell-derived exosomes for promoting endometrium regeneration and fertility restoration through macrophage immunomodulation

Endometrial traumas may cause intrauterine adhesions (IUAs), leading to infertility. Conventional methods in clinic have not solved the problem of endometrial regeneration in severe cases. Umbilical cord-derived mesenchymal stem cell (UC-MSC)-based therapies have shown some promising achievements in the treatment of IUAs. However, the limitations of potential tumorigenicity, low infusion and low retention are still controversial and restricted the clinical application of MSCs. In contrast, UC-MSC-derived exosomes exhibit a similar function to their source cells and are expected to overcome these limitations. Therefore, a novel and viable cell-free therapeutic strategy by UC-MSC-derived exosomes was proposed in this study. Here, we designed a construct of exosomes and collagen scaffold (CS/Exos) for endometrial regeneration in a rat endometrium-damage model, and investigated the regeneration mechanism through macrophage immunomodulation. The CS/Exos transplantation potently induced (i) endometrium regeneration, (ii) collagen remodeling, (iii) increased the expression of the estrogen receptor α/progesterone receptor, and (iv) restored fertility. Mechanistically, CS/Exos facilitated CD163⁺ M2 macrophage polarization, reduced inflammation, and increased anti-inflammatory responses in vivo and in vitro. By RNA-seq, miRNAs enriched in exosomes were the main mediator for exosomes-induced macrophage polarization. Overall, we demonstrated that CS/Exos treatment facilitated endometrium regeneration and fertility restoration by immunomodulatory functions of miRNAs. Our research highlights the therapeutic prospects of CS/Exos for the management of IUAs. STATEMENT OF SIGNIFICANCE: Severe endometrial traumas always result in intrauterine adhesions (IUAs) and infertility. The limited outcomes by conventional methods in the clinic make it very important to develop new strategies for endometrium regeneration and fertility restoration. In this study, an exosome-laden scaffold (CS/Exos) was designed and the transplantation of CS/Exos potently induced (i) endometrium regeneration, (ii) collagen remodeling, (iii) increased the expression of the estrogen receptor α/progesterone receptor, and (iv) restored fertility. In mechanism, the construct of CS/Exos facilitated M2 macrophage polarization, reduced inflammation, and increased anti-inflammatory responses. Furthermore, miRNAs enriched in exosomes were the main mediator for exosome-induced macrophage polarization. This study highlights the therapeutic prospects of CS/Exos and the translational application for the management of severe IUAs.

Electrospun Nanofibers for Improved Angiogenesis: Promises for Tissue Engineering Applications

Angiogenesis (or the development of new blood vessels) is a key event in tissue engineering and regenerative medicine; thus, a number of biomaterials have been developed and combined with stem cells and/or bioactive molecules to produce three-dimensional (3D) pro-angiogenic constructs. Among the various biomaterials, electrospun nanofibrous scaffolds offer great opportunities for pro-angiogenic approaches in tissue repair and regeneration. Nanofibers made of natural and synthetic polymers are often used to incorporate bioactive components (e.g., bioactive glasses (BGs)) and load biomolecules (e.g., vascular endothelial growth factor (VEGF)) that exert pro-angiogenic activity. Furthermore, seeding of specific types of stem cells (e.g., endothelial progenitor cells) onto nanofibrous scaffolds is considered as a valuable alternative for inducing angiogenesis. The effectiveness of these strategies has been extensively examined both in vitro and in vivo and the outcomes have shown promise in the reconstruction of hard and soft tissues (mainly bone and skin, respectively). However, the translational of electrospun scaffolds with pro-angiogenic molecules or cells is only at its beginning, requiring more research to prove their usefulness in the repair and regeneration of other highly-vascularized vital tissues and organs. This review will cover the latest progress in designing and developing pro-angiogenic electrospun nanofibers and evaluate their usefulness in a tissue engineering and regenerative medicine setting.

Drug-loading three-dimensional scaffolds based on hydroxyapatite-sodium alginate for bone regeneration

Bone tissue engineering is a promising approach for tackling clinical challenges. Osteoprogenitor cells, osteogenic factors, and osteoinductive/osteoconductive scaffolds are employed in bone tissue engineering. However, scaffold materials remain limited due to their source, low biocompatibility, and so on. In this study, a composite hydrogel scaffold composed of hydroxyapatite (HA) and sodium alginate (SA) was manufactured using three-dimensional printing. Naringin (NG) and calcitonin-gene-related peptide (CGRP) were used as osteogenic factors in the fabrication of drug-loaded scaffolds. Investigation using animal experiments, as well as scanning electron microscopy, cell counting kit-8 testing, alkaline phosphatase staining, and alizarin red-D staining of bone marrow mesenchymal stem cell culture showed that the three scaffolds displayed similar physicochemical properties and that the HA/SA/NG and HA/SA/CGRP scaffolds displayed better osteogenesis than that of the HA/SA scaffold. Thus, the HA/SA scaffold could be a biocompatible material with potential applications in bone regeneration. Meanwhile, NG and CGRP doping could result in better and more positive proliferation and differentiation.

TNF-α and INF-γ primed canine stem cell-derived extracellular vesicles alleviate experimental murine colitis

The inflammatory bowel diseases (IBD) are characterized by relapsing inflammation and immune activation diseases of the gastrointestinal tract. Extracellular vesicles, which elicit similar biological activity to the stem cell themselves, have been used experimentally to treat dextran sulfate sodium (DSS)-induced colitis in murine models though immunosuppressive potential. In this study, we investigated whether the Extracellular vesicles (EVs) obtained by stimulating inflammatory cytokine on canine adipose mesenchymal stem cells (cASC) improved anti-inflammatory and/or immunosuppressive potential of EVs, and/or their ability to alleviate inflammation in colitis. We also explored the correlation between immune cells and the inflammatory repressive effect of primed EVs. Pro-inflammatory cytokines such as TNF-α and IFN-γ increased immunosuppressive protein such as HGF, TSG-6, PGE2 and TGF-β in EVs. Moreover, the anti-inflammatory effect of EVs was improved through pretreatment with inflammatory cytokines. Importantly, EVs obtained from primed stem cells effectively induced macrophage polarization toward an anti-inflammatory M2 phenotype and suppressed activated immunity by enhancing regulatory T cells in inflamed colon in mice. Our results provide a new and effective therapy for the EVs obtained from ASC stimulated with TNF-α and IFN-γ against not only IBD, but also immune-mediated disease.

Reviewing recently developed technologies to direct cell activity through the control of pore size: From the macro- to the nanoscale

Scaffold pore size plays a fundamental role in the regeneration of new tissue since it has been shown to direct cell activity in situ. It is well known that cellular response changes in relation with pores diameter. Consequently, researchers developed efficient approaches to realize scaffolds with controllable macro-, micro-, and nanoporous architecture. In this context, new strategies aiming at the manufacturing of scaffolds with multiscale pore networks have emerged, in the attempt to mimic the complex hierarchical structures found in living systems. In this review, we aim at providing an overview of the fabrication methods currently adopted to realize scaffolds with controlled, multisized pores highlighting their specific influence on cellular activity.