Modification of human MSC surface with oligopeptide‐PEG‐lipids for selective binding to activated endothelium

Ex Vivo Peptide Decoration Strategies on Stem Cell Surfaces for Augmenting Endothelium Interaction

Ischemic vascular diseases remain leading causes of disability and death. Although various clinical therapies have been tried, reperfusion injury is a major issue, occurring when blood recirculates at the damaged lesion. As an alternative approach, cell-based therapy has emerged. Mesenchymal stem cells (MSCs) are attractive cellular candidates due to their therapeutic capacities, including differentiation, safety, angiogenesis, and tissue repair. However, low levels of receptors/ligands limit targeted migration of stem cells. Thus, it is important to improve homing efficacy of transplanted MSCs toward damaged endothelium. Among various MSC modulations, ex vivo cell surface engineering could effectively augment homing efficiency by decorating MSC surfaces with alternative receptors/ligands, thereby facilitating intercellular interactions with the endothelium. Especially, exogenous decoration of peptides onto stem cell surfaces could provide appropriate functional signaling moieties to achieve sufficient MSC homing. Based on their protein-like functionalities, high modularity in molecular design, and high specific affinities and multivalency to target receptors, peptides could be representative surface-presentable moieties. Moreover, peptides feature a mild synthetic process, enabling precise control of amino acid composition and sequence. Such ex vivo stem cell surface engineering could be achieved primarily by hydrophobic interactions of the cellular bilayer with peptide-conjugated anchor modules and by covalent conjugation between peptides and available compartments in membranes. To this end, this review provides an overview of currently available peptide-mediated, ex vivo stem cell surface engineering strategies for enhancing MSC homing efficiency by facilitating interactions with endothelial cells. Stem cell surface engineering techniques using peptide-based bioconjugates have the potential to revolutionize current vascular disease treatments while addressing their technical limitations.

Efficient delivery of mesenchymal stem/stromal cells to injured liver by surface PEGylation

BACKGROUND

Mesenchymal stem/stromal cells (MSCs) have been used in clinical trials for various diseases. These have certain notable functions such as homing to inflammation sites, tissue repair, and immune regulation. In many pre-clinical studies, MSCs administered into peripheral veins demonstrated effective therapeutic outcomes. However, most of the intravenously administered MSCs were entrapped in the lung, and homing to target sites was less than 1%. This occurred mainly because of the adhesion of MSCs to vascular endothelial cells in the lung. To prevent this adhesion, we modified the surface of MSCs with polyethylene glycol (PEG; a biocompatible polymer) using the avidin-biotin complex (ABC) method.

METHODS

The surface of MSCs was modified with PEG using the ABC method. Then, the cell adhesion to mouse aortic endothelial cells and the tissue distribution of PEG-modified MSCs were evaluated. Moreover, the homing to the injured liver and therapeutic effect of PEG-modified MSCs were evaluated using carbon tetrachloride-induced acute liver failure model mice.

RESULTS

The PEG modification significantly suppressed the adhesion of MSCs to cultured mouse aortic endothelial cells as well as the entrapment of MSCs in the lungs after intravenous injection in mice. PEG-modified MSCs efficiently homed to the injured liver of carbon tetrachloride-induced acute liver failure model mice. More importantly, the cells significantly suppressed serum transaminase levels and leukocyte infiltration into the injured liver.

CONCLUSION

These results indicate that PEG modification to the surface of MSCs can suppress the lung entrapment of intravenously administered MSCs and improve their homing to the injured liver.

Supporting wound healing by mesenchymal stem cells (MSCs) therapy in combination with scaffold, hydrogel, and matrix; State of the art

Non-healing wounds impose a huge annual cost on the survival of different countries and large populations in the world. Wound healing is a complex and multi-step process, the speed and quality of which can be changed by various factors. To promote wound healing, compounds such as platelet-rich plasma, growth factors, platelet lysate, scaffolds, matrix, hydrogel, and cell therapy, in particular, with mesenchymal stem cells (MSCs) are suggested. Nowadays, the use of MSCs has attracted a lot of attention. These cells can induce their effect by direct effect and secretion of exosomes. On the other hand, scaffolds, matrix, and hydrogels provide suitable conditions for wound healing and the growth, proliferation, differentiation, and secretion of cells. In addition to generating suitable conditions for wound healing, the combination of biomaterials and MSCs increases the function of these cells at the site of injury by favoring their survival, proliferation, differentiation, and paracrine activity. In addition, other compounds such as glycol, sodium alginate/collagen hydrogel, chitosan, peptide, timolol, and poly(vinyl) alcohol can be used along with these treatments to increase the effectiveness of treatments in wound healing. In this review article, we take a glimpse into the merging scaffolds, hydrogels, and matrix application with MSCs therapy to favor wound healing.

Polymeric biomaterial-inspired cell surface modulation for the development of novel anticancer therapeutics

Immune cell-based therapies are a rapidly emerging class of new medicines that directly treat and prevent targeted cancer. However multiple biological barriers impede the activity of live immune cells, and therefore necessitate the use of surface-modified immune cells for cancer prevention. Synthetic and/or natural biomaterials represent the leading approach for immune cell surface modulation. Different types of biomaterials can be applied to cell surface membranes through hydrophobic insertion, layer-by-layer attachment, and covalent conjugations to acquire surface modification in mammalian cells. These biomaterials generate reciprocity to enable cell-cell interactions. In this review, we highlight the different biomaterials (lipidic and polymeric)-based advanced applications for cell-surface modulation, a few cell recognition moieties, and how their interplay in cell-cell interaction. We discuss the cancer-killing efficacy of NK cells, followed by their surface engineering for cancer treatment. Ultimately, this review connects biomaterials and biologically active NK cells that play key roles in cancer immunotherapy applications.

Lipid-mediated ex vivo cell surface engineering for augmented cellular functionalities

Once administrated, intercellular adhesion to recognize and/or arrest target cells is essential for specific treatments, especially for cancer or tumor. However, immune cells administrated into the tumor-microenvironment could lose their intrinsic functionalities such as target recognition ability, resulting in an ineffective cancer immunotherapy. Various manipulation techniques for decorating functional moieties onto cell surface and enhancing target recognition have been developed. A hydrophobic interaction-mediated ex-vivo cell surface engineering using lipid-based biomaterials could be a state-of-the-art engineering technique that could achieve high-efficiency cell surface modification by a single method without disturbance of intrinsic characteristics of cells. In this regard, this review provides design principles for the development of lipid-based biomaterials with a linear structure of lipid, polyethylene glycol, and functional group, strategies for the synthesis process, and their practical applications in biomedical engineering. Especially, we provide new insights into the development of a novel surface coating techniques for natural killer (NK) cells with engineering decoration of cancer targeting moieties on their cell surfaces. Among immune cells, NK cells are interesting cell population for substituting T cells because of their excellent safety and independent anticancer efficacy. Thus, optimal strategies to select cancer-type-specific targeting moieties and present them onto the surface of immune cells (especially, NK cells) using lipid-based biomaterials could provide additional tools to capture cancer cells for developing novel immune cell therapy products. Enhanced anticancer efficacies by surface-engineered NK cells have been demonstrated both in vitro and in vivo. Therefore, it could be speculated that recent progresses in cell surface modification technology via lipid-based biomaterials could strengthen immune surveillance and immune synapses for utilization in a next-generation cancer immunotherapy, beyond currently available genetic engineering tool such as chimeric antigen receptor-mediated immune cell modulation.

Enhancement of intercellular interaction between iPSC-derived neural progenitor cells and activated endothelial cells using cell surface modification with functional oligopeptides

Cell-based therapy has been used to treat stroke related disorders, which have no treatment options available 4.5 hours after onset. Although the administration of tissue plasminogen activator and mechanical thrombectomy are potent treatments, their clinical implementation is limited within the available time. Here, we aimed to use induced pluripotent stem cell-derived neural progenitor cells (NPCs) for stroke treatment with higher delivery efficiency in stroke areas, which will improve the therapeutic effect. E-selectin binding oligopeptide (Esbp) was conjugated with poly(ethylene glycol)-conjugated-lipid (Esbp-PEG-lipid) with different molecular weights of PEG (5 and 40 kDa) for cell surface modification. Then, we optimized the cell surface modification of NPCs by studying cell-binding ability onto the model surfaces of stroke areas, such as recombinant E-selectin-immobilized surfaces and TNF-α activated endothelium. As a result, the cell surface modification of NPCs with Esbp-PEG-lipid was found to induce specific intercellular interactions with the activated endothelium through the binding of Esbp with E-selectin. Additionally, the shorter PEG spacer was suitable for intercellular interactions. Thus, our technique shows potential for use in cell therapy with enhanced cell accumulation in infarct areas.

Challenges and Improvements of Novel Therapies for Ischemic Stroke

Stroke is the third most common disease all over the world, which is regarded as a hotspot in medical research because of its high mortality and morbidity. Stroke, especially ischemic stroke, causes severe neural cell death, and no effective therapy is currently available for neuroregeneration after stroke. Although many therapies have been shown to be effective in preclinical studies of ischemic stroke, almost none of them passed clinical trials, and the reasons for most failures have not been well identified. In this review, we focus on several novel methods, such as traditional Chinese medicine, stem cell therapy, and exosomes that have not been used for ischemic stroke till recent decades. We summarize the proposed basic mechanisms underlying these therapies and related clinical results, discussing advantages and current limitations for each therapy emphatically. Based on the limitations such as side effects, narrow therapeutic window, and less accumulation at the injury region, structure transformation and drug combination are subsequently applied, providing a deep understanding to develop effective treatment strategies for ischemic stroke in the near future.

Overview of polyethylene glycol-based materials with a special focus on core-shell particles for drug delivery application

Polyethylene glycols (PEG) are water-soluble nonionic polymeric molecules. PEG and PEG-based materials are used for various important applications such as solvents, adhesives, adsorbents, drug delivery agents, tissue engineering scaffolds, etc. The coating of nanoparticles with PEG forms core-shell nanoparticles. The PEG-based core-shell nanoparticles are synthesized for the development of high-quality drug delivery systems. In the present review, we first explained the basics and various applications of PEGs and PEG-based composites materials and then concentrated on the PEG-based core-shell nanoparticles for biomedical applications specifically their use in drug delivery.

Anticancer drug-loaded mesenchymal stem cells for targeted cancer therapy

Mesenchymal stem cells (MSCs) have a tumor-homing ability-they accumulate inside tumors after systemic injection, and may thus be useful as carriers for tumor-targeting therapy. To use MSCs effectively as an anti-cancer therapy, they must first be functionalized with a large amount of anti-cancer drugs without causing any significant changes to their tumor-tropism. In the present study, we attempted to modify the cell surface of MSCs with doxorubicin-loaded liposomes (DOX-Lips), using the avidin-biotin complex method, and evaluated delivery efficiency and anti-tumor efficacy of DOX-Lip-modified MSCs. The amount of DOX in DOX-Lip-modified C3H10T1/2 cells, a murine mesenchymal stem cell line, was approximately 21.5 pg per cell, with no significant changes to the tumor-tropism of C3H10T1/2 cells. Notably, DOX-Lip-modified C3H10T1/2 cells significantly suppressed the proliferation of firefly luciferase-expressing murine colon adenocarcinoma colon26/fluc cells, compared to DOX-Lips alone. Fluorescent DOX accumulated at the cell contact surface and inside green fluorescence protein-expressing colon26 (colon26/GFP) in co-cultures of DOX-Lip-modified C3H10T1/2 and colon26/GFP cells. This localized distribution was not observed when only DOX-Lips was added to colon26/GFP cells. These results suggest that DOX-Lips are efficiently delivered from DOX-Lip-modified C3H10T1/2 cells to the neighboring colon26 cells. Furthermore, DOX-Lip-modified C3H10T1/2 cells suppressed tumor growth in subcutaneous tumor-bearing mice, and in a lung metastasis mouse model. Taken together, these results indicate that the intercellular delivery of DOX may be enhanced using DOX-Lip-modified MSCs as an efficient carrier system for targeted tumor therapy.

Potential of Cell Surface Engineering with Biocompatible Polymers for Biomedical Applications

The regulation of the cellular surface with biomaterials can contribute to the progress of biomedical applications. In particular, the cell surface is exposed to immunological surveillance and reactions in transplantation therapy, and modulation of cell surface properties might improve transplantation outcomes. The transplantation of therapeutic cells, tissue, and organs is an effective and fundamental treatment and has contributed to saving lives and improving quality of life. Because of shortages, donor cells, tissues, and organs are carefully transplanted with the goal of retaining activity and viability. However, some issues remain to be resolved in terms of reducing side effects, improving graft survival, managing innate and adaptive immune responses, and improving transplant storage and procedures. Given that the transplantation process involves multiple steps and is technically complicated, an engineering approach together with medical approaches to resolving these issues could enhance success. In particular, cell surface engineering with biocompatible polymers looks promising for improving transplantation therapy and has potential for other biomedical applications. Here we review the significance of polymer-based surface modification of cells and organs for biomedical applications, focusing on the following three topics: Cell protection: cellular protection through local immune regulation using cell surface modification with biocompatible polymers. This protection could extend to preventing attack by the host immune system, freeing recipients from taking immunosuppressive drugs, and avoiding a second transplantation. Cell attachment: cell manipulation, which is an important technique for delivery of therapeutic cells and their alignment for recellularization of decellularized tissues and organs in regenerative therapy. Cell fusion: fusion of different cells, which can lead to the formation of new functional cells that could be useful for generating, e.g., immunologically competent or metabolically active cells.

Identification of Metal-Binding Peptides and Their Conjugation onto Nanoparticles of Superparamagnetic Iron Oxides and Liposomes

Metallic materials are used for clinical medical devices such as vascular stents and coils to treat both ischemic and hemorrhagic vascular diseases. An antiplatelet drug is required to avoid thromboembolic complication until metallic surface is covered with a neo-endothelial cell layer. It is important to identify endothelial cell coverage on the metallic surface. However, it is difficult since there are no selective ligands. Here, we used the phage display method to identify peptide ligands that had high affinity for the metallic surface of Ni-Ti stents, Pt-W coils, and Co-Cr stents. The binding assay using fluorescence labeling revealed that several synthetic peptides could bind onto those surfaces. We also chose some oligopeptides for the conjugation onto superparamagnetic iron oxide (SPIO) nanoparticles and liposome-encapsulating SPIO nanoparticles and studied their ability to bind to the stent and coils. By SEM and fluorophotometry, we found that those modified SPIOs and liposomes were selectively bound onto those surfaces. In addition, both treated stents and coils could be detected by magnetic resonance imaging due to the magnetic artifact through the SPIOs and liposomes that were immobilized onto the surface. Thus, we identified metal-binding peptides which may enable to stop antiplatelet therapy after vascular stenting or coiling.

Promotion of cell membrane fusion by cell-cell attachment through cell surface modification with functional peptide-PEG-lipids

Cell fusion is a fundamental event in various biological processes and has been applied to a number of biotechnologies. However, cell fusion efficiency is still low and strongly depends on cell lines and skills, though some improvements have been made. Our hypothesis is that two distinct cell membranes need to be brought together for cell membrane fusion, which is important for mimicking cell fusion in vitro. Here, we aimed to improve the homogeneous and heterogeneous cell fusion efficiency using a cell-cell attachment technique. We modified cellular membranes with two distinctive poly(ethylene glycol)-lipids (PEG-lipids) carrying oligopeptide, three repeated units of the EIAALEK and KIAALKE sequences (fuE3 and fuK3, respectively), which induce cell-cell attachment. The ratio and area of cell-cell attachment can be controlled through surface modification with fuE3-and fuK3-PEG-lipids by changing the number of each incorporated peptide. By combining this technique with the PEG-induced method, the cell fusion efficiency was significantly improved for homogeneous and heterogeneous cell fusion compared to conventional PEG-induced methods. For homogeneous CCRF-CEM cell fusion, the efficiency increased up to 64% from the 8.4% with the PEG-induced method. In addition, for heterogeneous cell fusion of myeloma cells and splenocytes, the efficiency increased up to 18% from almost zero. Thus, cell membrane fusion could be promoted effectively between closely contacted cell membranes induced by the cell-cell attachment technique.