Developing a self-organized tubulogenesis model of human renal proximal tubular epithelial cells in vitro

Role of extracellular matrix components and structure in new renal models in vitro

The extracellular matrix (ECM), a complex set of fibrillar proteins and proteoglycans, supports the renal parenchyma and provides biomechanical and biochemical cues critical for spatial-temporal patterning of cell development and acquisition of specialized functions. As in vitro models progress towards biomimicry, more attention is paid to reproducing ECM-mediated stimuli. ECM's role in in vitro models of renal function and disease used to investigate kidney injury and regeneration is discussed. Availability, affordability, and lot-to-lot consistency are the main factors determining the selection of materials to recreate ECM in vitro. While simpler components can be synthesized in vitro, others must be isolated from animal or human tissues, either as single isolated components or as complex mixtures, such as Matrigel or decellularized formulations. Synthetic polymeric materials with dynamic and instructive capacities are also being explored for cell mechanical support to overcome the issues with natural products. ECM components can be used as simple 2D coatings or complex 3D scaffolds combining natural and synthetic materials. The goal is to recreate the biochemical signals provided by glycosaminoglycans and other signaling molecules, together with the stiffness, elasticity, segmentation, and dimensionality of the original kidney tissue, to support the specialized functions of glomerular, tubular, and vascular compartments. ECM mimicking also plays a central role in recent developments aiming to reproduce renal tissue in vitro or even in therapeutical strategies to regenerate renal function. Bioprinting of renal tubules, recellularization of kidney ECM scaffolds, and development of kidney organoids are examples. Future solutions will probably combine these technologies.

Extended longevity geometrically-inverted proximal tubule organoids

This study reports the cellular self-organization of primary human renal proximal tubule epithelial cells (RPTECs) around a minimal Matrigel scaffold to produce basal-in and apical-out proximal tubule organoids (tubuloids). These tubuloids are produced and maintained in hanging drop cultures for 90+ days, the longest such culture of any kind reported to date. The tubuloids upregulate maturity markers, such as aquaporin-1 (AQP1) and megalin (LRP2), and exhibit less mesenchymal and proliferation markers, such as vimentin and Ki67, compared to 2D cultures. They also experience changes over time as revealed by a comparison of gene expression patterns of cells in 2D culture and in day 31 and day 67 tubuloids. Gene expression analysis and immunohistochemistry reveal an increase in the expression of megalin, an endocytic receptor that can directly bind and uptake protein or potentially assist protein uptake. The tubuloids, including day 90 tubuloids, uptake fluorescent albumin and reveal punctate fluorescent patterns, suggesting functional endocytic uptake through these receptors. Furthermore, the tubuloids release kidney injury molecule-1 (KIM-1), a common biomarker for kidney injury, when exposed to albumin in both dose- and time-dependent manners. While this study focuses on potential applications for modeling proteinuric kidney disease, the tubuloids may have broad utility for studies where apical proximal tubule cell access is required.

In Vitro Models of Biological Barriers for Nanomedical Research

Nanoconstructs developed for biomedical purposes must overcome diverse biological barriers before reaching the target where playing their therapeutic or diagnostic function. In vivo models are very complex and unsuitable to distinguish the roles plaid by the multiple biological barriers on nanoparticle biodistribution and effect; in addition, they are costly, time-consuming and subject to strict ethical regulation. For these reasons, simplified in vitro models are preferred, at least for the earlier phases of the nanoconstruct development. Many in vitro models have therefore been set up. Each model has its own pros and cons: conventional 2D cell cultures are simple and cost-effective, but the information remains limited to single cells; cell monolayers allow the formation of cell–cell junctions and the assessment of nanoparticle translocation across structured barriers but they lack three-dimensionality; 3D cell culture systems are more appropriate to test in vitro nanoparticle biodistribution but they are static; finally, bioreactors and microfluidic devices can mimicking the physiological flow occurring in vivo thus providing in vitro biological barrier models suitable to reliably assess nanoparticles relocation. In this evolving context, the present review provides an overview of the most representative and performing in vitro models of biological barriers set up for nanomedical research.

Processing-Structure-Properties Relationships of Glycerol-Plasticized Silk Films

Silk possesses excellent mechanical properties and biocompatibility due to its unique protein sequences and hierarchical structures. Thus, it has been widely used as a biomaterial in a broad spectrum of biomedical applications. In this study, an in-depth investigation of glycerol-plasticized silk films was carried out to understand the processing-structure-properties relationships. A series of glycerol-plasticized silk films with glycerol contents in the range of 0 to 30% (w/w) were prepared. The molecular structures and organizations of silk proteins and the interactions between glycerol and proteins were studied using FTIR, XRD, and DSC. At a low glycerol content (<12%), DSC revealed that the glass transition temperature and thermally induced crystallization temperature decreased as the glycerol content increased, implying that glycerol mainly interacts with silk proteins through hydrogen bonding. As the glycerol content further increased, the chain mobility of the silk proteins was promoted, leading to the formation of β-sheet structures, water insolubility, and increased crystallinity. In addition, the stretchability and toughness of the films were significantly enhanced. The role of glycerol as a plasticizer in regulating the silk protein structures and determining the properties of the films was thoroughly discussed.

Aligned Silk Sponge Fabrication and Perfusion Culture for Scalable Proximal Tubule Tissue Engineering

Chronic kidney disease and kidney failure are on the rise globally, yet there has not been a corresponding improvement in available therapies. A key challenge in a biological approach to developing kidney tissue is to identify scaffolding materials that support cell growth both in vitro and in vivo to facilitate translational goals. Scaffolds composed of silk fibroin protein possess the biocompatibility, mechanical robustness, and stability required for tissue engineering. Here, we use a silk sponge system to support kidney cells in a perfused bioreactor system. Silk fibroin protein underwent directional freezing to form parallel porous structures that mimic the native kidney structure of aligned tubules and are able to support more cells than nonaligned silk sponges. Adult immortalized renal proximal tubule epithelial cells were seeded into the sponges and cultured under static conditions for 1 week, then grown statically or with perfusion with culture media flowing through the sponge to enhance cell alignment and maturation. The sponges were imaged with confocal and scanning electron microscopies to analyze and quantify cell attachment, alignment, and expression of proteins important to proximal tubule differentiation and function. The perfused tissue constructs showed higher number of cells that are more evenly distributed through the construct and increased gene expression of several key markers of proximal tubule epithelial cell function compared to sponges grown under static conditions. These perfused tissue constructs represent a step toward a scalable approach to engineering proximal tubule structures with the potential to be used as in vitro models or as in vivo implantable tissues to supplement or replace impaired kidney function.

Advances in Engineering Human Tissue Models

Research in cell biology greatly relies on cell-based in vitro assays and models that facilitate the investigation and understanding of specific biological events and processes under different conditions. The quality of such experimental models and particularly the level at which they represent cell behavior in the native tissue, is of critical importance for our understanding of cell interactions within tissues and organs. Conventionally, in vitro models are based on experimental manipulation of mammalian cells, grown as monolayers on flat, two-dimensional (2D) substrates. Despite the amazing progress and discoveries achieved with flat biology models, our ability to translate biological insights has been limited, since the 2D environment does not reflect the physiological behavior of cells in real tissues. Advances in 3D cell biology and engineering have led to the development of a new generation of cell culture formats that can better recapitulate the in vivo microenvironment, allowing us to examine cells and their interactions in a more biomimetic context. Modern biomedical research has at its disposal novel technological approaches that promote development of more sophisticated and robust tissue engineering in vitro models, including scaffold- or hydrogel-based formats, organotypic cultures, and organs-on-chips. Even though such systems are necessarily simplified to capture a particular range of physiology, their ability to model specific processes of human biology is greatly valued for their potential to close the gap between conventional animal studies and human (patho-) physiology. Here, we review recent advances in 3D biomimetic cultures, focusing on the technological bricks available to develop more physiologically relevant in vitro models of human tissues. By highlighting applications and examples of several physiological and disease models, we identify the limitations and challenges which the field needs to address in order to more effectively incorporate synthetic biomimetic culture platforms into biomedical research.

Matrigel-Free Laminin-Entactin Matrix to Induce Human Renal Proximal Tubule Structure Formation In Vitro

A successful in vitro tissue model must recapitulate the native tissue features while also being reproducible. Currently, Matrigel is the principal biomaterial used to induce the formation of proximal convoluted tubules (PCTs) in vitro, because of its similar composition and structure with the kidney tubular basement membrane and the presence of critical growth factors. However, Matrigel is not well-defined, and batch-to-batch variability is a significant issue. Here, we define a Matrigel-free method, using a laminin-entactin (L-E) matrix to support the formation of proximal tubular-like structures in vitro using immortalized human renal epithelial cells (RPTEC/TERT1) cocultured with murine fibroblast stromal cells (FOXD1^lacZ+). The matrix supports the presence of specific components of the tubular basement membrane (laminin, entactin/nidogen, and heparan sulfate proteoglycan) in addition to fibroblast growth factor 8a (FGF-8a). The matrix also induces tubulogenesis, leading to the formation of PCTs based on several key markers, including E-cadherin, aquaporin-1, and Na⁺/K⁺ ATPase. Moreover, these PCT structures displayed cell polarity and a well-defined lumen after 18 days in culture. This laminin-entactin (L-E) matrix constitutes a defined and consistent biomaterial that can be used in kidney tissue engineering for understanding in vitro proximal tubule development and for nephrotoxicity studies.