Biocompatibility and osseointegration of beta-TCP: histomorphological and biomechanical studies in a weight-bearing sheep model

Suspension-Sprayed Calcium Phosphate Coatings with Antibacterial Properties

Prosthesis loosening due to lack of osteointegration between an implant and surrounding bone tissue is one of the most common causes of implant failure. Further, bacterial contamination and biofilm formation onto implants represent a serious complication after surgery. The enhancement of osteointegration can be achieved by using bioconductive materials that promote biological responses in the body, stimulating bone growth and thus bonding to tissue. Through the incorporation of antibacterial substances in bioconductive, biodegradable calcium phosphate (CaP) coatings, faster osteointegration and bactericidal properties can be achieved. In this study, Cu-doped CaP supraparticles are spray-dried and suspension-sprayed CaP ceramic coatings with antibacterial properties are prepared using high-velocity suspension flame spraying (HVSFS). The objective was to increase the coatings' porosity and investigate which Cu-doped supraparticles have the strongest antibacterial properties when introduced into the coating layers. Biocompatibility was tested on human Osteosarcoma cells MG63. A porosity of at least 13% was achieved and the supraparticles could be implemented, enhancing it up to 16%. The results showed that the addition of Cu-doped supraparticles did not significantly reduce the number of viable cells compared to the Cu-free sample, demonstrating good biocompatibility. The antimicrobial activity was assessed against the bacterial strains Escherichia coli and Staphylococcus aureus, with Safe Airborne Antibacterial testing showing a significant reduction in both Gram-positive and Gram-negative strains on the Cu-doped coatings.

Scaffolds for Dentin-Pulp Complex Regeneration

Background and Objectives: Regenerative dentistry aims to regenerate the pulp-dentin complex and restore those of its functions that have become compromised by pulp injury and/or inflammation. Scaffold-based techniques are a regeneration strategy that replicate a biological environment by utilizing a suitable scaffold, which is considered crucial for the successful regeneration of dental pulp. The aim of the present review is to address the main characteristics of the different scaffolds, as well as their application in dentin-pulp complex regeneration. Materials and Methods: A narrative review was conducted by two independent reviewers to answer the research question: What type of scaffolds can be used in dentin-pulp complex regeneration? An electronic search of PubMed, EMBASE and Cochrane library databases was undertaken. Keywords including "pulp-dentin regeneration scaffold" and "pulp-dentin complex regeneration" were used. To locate additional reports, reference mining of the identified papers was undertaken. Results: A wide variety of biomaterials is already available for tissue engineering and can be broadly categorized into two groups: (i) natural, and (ii) synthetic, scaffolds. Natural scaffolds often contain bioactive molecules, growth factors, and signaling cues that can positively influence cell behavior. These signaling molecules can promote specific cellular responses, such as cell proliferation and differentiation, crucial for effective tissue regeneration. Synthetic scaffolds offer flexibility in design and can be tailored to meet specific requirements, such as size, shape, and mechanical properties. Moreover, they can be functionalized with bioactive molecules, growth factors, or signaling cues to enhance their biological properties and the manufacturing process can be standardized, ensuring consistent quality for widespread clinical use. Conclusions: There is still a lack of evidence to determine the optimal scaffold composition that meets the specific requirements and complexities needed for effectively promoting dental pulp tissue engineering and achieving successful clinical outcomes.

Adjustment of Micro- and Macroporosity of ß-TCP Scaffolds Using Solid-Stabilized Foams as Bone Replacement

To enable rapid osteointegration in bioceramic implants and to give them osteoinductive properties, scaffolds with defined micro- and macroporosity are required. Pores or pore networks promote the integration of cells into the implant, facilitating the supply of nutrients and the removal of metabolic products. In this paper, scaffolds are created from ß-tricalciumphosphate (ß-TCP) and in a novel way, where both the micro- and macroporosity are adjusted simultaneously by the addition of pore-forming polymer particles. The particles used are 10-40 wt%, spherical polymer particles of polymethylmethacrylate (PMMA) (Ø = 5 µm) and alternatively polymethylsilsesquioxane (PMSQ) (Ø = 2 µm), added in the course of ß-TCP slurry preparation. The arrangement of hydrophobic polymer particles at the interface of air bubbles was incorporated during slurry preparation and foaming of the slurry. The foam structures remain after sintering and lead to the formation of macro-porosity in the scaffolds. Furthermore, decomposition of the polymer particles during thermal debindering results in the formation of an additional network of interconnecting micropores in the stabilizing structures. It is possible to adjust the porosity easily and quickly in a range of 1.2-140 μm with a relatively low organic fraction. The structures thus prepared showed no cytotoxicity nor negative effects on the biocompatibility.

Accelerated bone regeneration through rational design of magnesium phosphate cements

Results of several studies during past years suggested that magnesium phosphate cements (MPCs) not only show excellent biocompatibility and osteoconductivity, but they also provide improved regeneration capacity due to higher solubility compared to calcium phosphates. These findings also highlighted that chemical similarity of bone substitutes to the natural bone tissue is not a determinant factor in the success of regenerative strategies. The aim of this study was to further improve the degradation speed of MPCs for a fast bone ingrowth within a few months. We confirmed our hypothesis, that decreasing the powder-liquid ratio (PLR) of cement results in an increased content of highly soluble phases such as struvite (MgNH₄PO₄⋅6H₂O) as well as K-struvite (MgKPO₄⋅6H₂O). Promising compositions with a low PLR of 1 g ml^-1 were implanted in partially-loaded tibia defects in sheep. Both cements were partially degraded and replaced by bone tissue after 4 months. The degradation speed of the K-struvite cement was significantly higher compared to the struvite cement, initially resulting in the formation of a cell-rich resorption zone at the surface of some implants, as determined by histology. Overall, both MPCs investigated in this study seem to be promising as an alternative to the clinically well-established, but slowly degrading calcium phosphate cements, depending on defect size and desired degradation rate. Whereas the K-struvite cement might require further modification towards a slower resorption and reduced inflammatory response in vivo, the struvite cement appears promising for the treatment of bone defects due to its continuous degradation with simultaneous new bone formation. STATEMENT OF SIGNIFICANCE: Cold setting bone cements are used for the treatment of bone defects that exceed a critical size and cannot heal on their own. They are applied pasty into the bone defect and harden afterwards so that the shape adapts to the individual defect. Magnesium phosphates such as magnesium ammonium phosphate hexahydrate (struvite) belong to a new class of these cold setting bone cements. They degrade much faster than the clinically established calcium phosphates. In this study, a magnesium phosphate that has hardly been investigated so far was implanted into partially-loaded defects in sheeps: Potassium magnesium phosphate hexahydrate. This showed even faster resorption compared to the struvite cement: after 4 months, 63% of the cement was already degraded.

Chiral Tartaric Acid Improves Fracture Toughness of Bioactive Brushite-Collagen Bone Cements

Brushite cements are promising bone regeneration materials with limited biological and mechanical properties. Here, we engineer a mechanically improved brushite-collagen type I cement with enhanced biological properties by use of chiral chemistry; d- and l-tartaric acid were used to limit crystal growth and increase the mechanical properties of brushite-collagen cements. The impact of the chiral molecules on the cements was examined with Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). A 3-point bend test was utilized to study the fracture toughness, and cell attachment and morphology studies were carried out to demonstrate biocompatibility. XRD and SEM analyses showed that l-, but not d-tartaric acid, significantly restrained brushite crystal growth by binding to the {010} plane of the mineral and increased brushite crystal packing and the collagen interaction area. l-Tartaric acid significantly improved fracture toughness compared to traditional brushite by 30%. Collagen significantly enhanced cell morphology and focal adhesion expression on l-tartaric acid-treated brushite cements.

Bone defect reconstruction with a novel biomaterial containing calcium phosphate and aluminum oxide reinforcement

Background

Reconstruction of metaphyseal fractures represents a clinical challenge for orthopedic surgeons. Especially in osteoporotic bone, these fractures are frequently accompanied by osseous substance defects. In order to ensure rapid mobilization of patients, high stability requirements must be met by osteosynthesis. Various bone graft materials have been introduced in the past, such as autologous bone or exogenous bone substitute materials. These are used as bone void fillers or as augmentation techniques to ensure safe fixation of osteosynthesis. New calcium phosphate-based bone void-filling materials could be a promising alternative to autologous bone or to the currently and widely used polymethylmethacrylate (PMMA)-based cement. The aim of this study was to evaluate a novel paste-like bone void filler in vivo and in vitro with regard to biocompatibility and osteoconductivity.

Methods

In addition to in vitro testing of cell compatibility using pre-osteoblasts (MC3T3-E1), 35 Wistar rats were treated in vivo with implantation of various material mixtures based on calcium phosphate and aluminum oxide reinforcement in a metaphyseal drill hole defect. After 4 weeks, an examination by micro-computed tomography (μCT) and histology was performed.

Results

The in vitro analysis showed good biocompatibility with a high cell survival of osteoblasts. In the in vivo experiments, a significantly higher bone ingrowth compared to the empty defect was shown by μCT and histological analysis. Here, the group receiving material reinforced with aluminum oxide (Al₂O₃) showed a bone volume/tissue volume (BV/TV) of 89.19% compared to a BV/TV of 83.14% for the empty defect (p = 0.0013). In the group treated with a polysaccharide matrix, no increase in BV/TV was observed given a mean ratio of 80.14%. Scoring of histological sections did not reveal a significant difference between CaP and CaP that was substituted with Al₂O₃.

Conclusion

The results of this study show an encouraging first step towards the development of new pasty, bone void-filling materials. We demonstrated that a new paste-like bone-filling material, based on calcium phosphate granulates and aluminum oxide to provide strength, exhibits good biocompatibility and osteoconductivity. Further biomechanical test in an osteoporotic animal model will have to be performed, to prove feasibility in metaphyseal defects.

Effect of Sintering on In Vivo Biological Performance of Chemically Deproteinized Bovine Hydroxyapatite

The influence of the manufacturing process on physicochemical properties and biological performance of xenogenic biomaterials has been extensively studied, but its quantification on bone-to-material contact remains poorly investigated. The aim of this study was to investigate the effect of different heat treatments of an experimental chemically-deproteinized bovine hydroxyapatite in vivo in terms of new bone formation and osteoconductivity. Protein-free hydroxyapatite from bovine origin was produced under sub-critical conditions and then either sintered at 820 °C or 1200 °C. Structural and morphological properties were assessed by scanning electron microscopy (SEM), measurement of surface area and X-ray diffractometry (XRD). The materials were then implanted in standardized alveolar bone defects in minipigs and histomorphometric evaluations were performed using non-decalcified sections. Marked topographical differences were observed by SEM analysis. As the sintering temperature of the experimental material increased, the surface area significantly decreased while crystallite size increased. In vivo samples showed that the highly sintered BHA presented a significantly lower percentage of newly formed bone than the unheated one (p = 0.009). In addition, the percentage of bone-to-material contact (BMC) was significantly lowered in the highly sintered group when compared to the unsintered (p = 0.01) and 820 °C sintered (p = 0.02) groups. Non-sintered or sintered at 820 °C BHA seems to maintain a certain surface roughness allowing better bone regeneration and BMC. On the contrary, sintering of BHA at 1200 °C has an effect on its morphological and structural characteristics and significantly modify its biological performance (osteoconductivity) and crystallinity.

Mineral-Coated Microparticles Enhance mRNA-Based Transfection of Human Bone Marrow Cells

The regenerative potential of bone marrow cells could be harnessed for tissue engineering applications. Bone marrow can be easily collected from patients, providing a valuable autologous source of therapeutic cells. However, years of delivery of bone marrow cells have highlighted the need for their genetic manipulation to overcome heterogeneity and to confer specificity to the regenerative process. In this study, we optimized the use of condensed mRNA as a non-viral alternative. As a proof of concept, we used mRNA encoding for reporter proteins such as EGFP or Firefly luciferase, which was condensed by complexing agents and delivered to human bone marrow cells using mineral-coated microparticles. We demonstrated that human bone marrow cells could be transfected with complexed mRNA, and that this approach was more efficient than the delivery of complexed plasmid DNA. In addition, human bone marrow cells were vulnerable to the toxicity of mRNA complexing agents, but these deleterious effects were mitigated by using mineral-coated microparticles as a carrier of complexed mRNA. Microparticle-mediated delivery of complexed mRNA also enabled higher cell metabolic activity and higher transfection in multiple in vitro culture conditions, including suspension culture and three-dimensional culture.

The effects of autologous platelet concentrate on the healing of intra-bony defects: a randomized clinical trial

PURPOSE

The present study aimed to evaluate the clinical and radiographic effects of autologous platelet concentrate (APC) on the healing of intra-bony defects filled with β-tricalcium phosphate (β-TCP) and covered with collagen membranes.

SUBJECTS AND METHODS

This study included 30 defects of 14 systemically healthy subjects. All of them had, at least, two deep intra-bony, inter-proximal periodontal defects. Minimum probing pocket depth (PPD) was 6 mm. Clinical and imaging examination was performed both at baseline and at 3, 6, and 9 months after surgery.

RESULTS

Both the test and control group revealed a significant reduction in all variables when compared with the base line. Mean reduction of the PPD in two groups at each follow-up time point showed no significant difference. Means of the clinical attachment gain of the same groups were significantly different (p<0.05). Mean gingival recession at 3 month was not significant. However, the means of gingival recession coverage of two groups were significantly different at 6 and 9 months (p<0.05 for both).

CONCLUSION

Sites treated with APC are more likely to demonstrate more clinical attachment gain and recession coverage at the end of 9 month compared to those without APC.

Glycosylated superparamagnetic nanoparticle gradients for osteochondral tissue engineering

In developmental biology, gradients of bioactive signals direct the formation of structural transitions in tissue that are key to physiological function. Failure to reproduce these native features in an in vitro setting can severely limit the success of bioengineered tissue constructs. In this report, we introduce a facile and rapid platform that uses magnetic field alignment of glycosylated superparamagnetic iron oxide nanoparticles, pre-loaded with growth factors, to pattern biochemical gradients into a range of biomaterial systems. Gradients of bone morphogenetic protein 2 in agarose hydrogels were used to spatially direct the osteogenesis of human mesenchymal stem cells and generate robust osteochondral tissue constructs exhibiting a clear mineral transition from bone to cartilage. Interestingly, the smooth gradients in growth factor concentration gave rise to biologically-relevant, emergent structural features, including a tidemark transition demarcating mineralized and non-mineralized tissue and an osteochondral interface rich in hypertrophic chondrocytes. This platform technology offers great versatility and provides an exciting new opportunity for overcoming a range of interfacial tissue engineering challenges.

Enhanced radiographic visualization of resorbable foils for orbital floor reconstruction: A proof of principle

PURPOSE

Despite the advantages and broad applications of alloplastic resorbable implants, postoperative radiological control is challenging due to its radiolucency. The aim of the present study was to evaluate the radiographic visibility of newly developed materials for orbital floor reconstruction.

MATERIALS AND METHODS

The radiographic visibility of four different material combinations consisting of poly-(L-lactic acid)/poly-glycolic acid (PLLA/PGA) or poly(D,L-lactic acid) (PDLLA) enriched with magnesium (Mg), hydroxyapatite (HA) or β-tricalcium phosphate (β-TCP) with various layers of thicknesses (0.3, 0.6, and 1 mm), surgically placed above the orbital floor of a human head specimen, was evaluated using computed tomography (CT) and cone beam computed tomography (CBCT). The visibility was rated on a scale of 0-10 in CT/CBCT and by Hounsfield Units in CT for each subject.

RESULTS

All of the materials were clearly detectable in CT scans. Visibility was significantly higher (p < 0.001) in the standard soft tissue window (mean score: 7.3, ranging from 2 to 10) in comparison to the standard bone window (mean score: 5.2, ranging from 1 to 10). In CBCT (mean score: 3.3, ranging from 0 to 7), there was significantly lower but still sufficient visibility of the materials compared to the CT soft tissue window (p < 0.001) and CT bone window (p < 0.001). Comparing the different materials' visibility among the group of same layer thicknesses with each other, in the majority of cases, PDLLA enriched with β-TCP appeared to be most visible in both CT and CBCT.

CONCLUSION

The incorporation of radiopaque elements to PLLA/PGA and PDLLA polymers is a promising strategy to improve their visibility in CT and CBCT. Our data suggest that the reconstruction of the orbital floor with these new materials could provide an advantageous postoperative radiographic control.

Mesenchymal stem cell seeded, biomimetic 3D printed scaffolds induce complete bridging of femoral critical sized defects

No current clinical treatments provide an ideal long-term solution for repair of long bone segment defects. Incomplete healing prevents patients from returning to preinjury activity and ultimately requires additional surgery to induce healing. Obtaining autologous graft material is costly, incurs morbidity, requires surgical time, and quality material is finite. In this pilot study, 3D printed biomimetic scaffolds were used to facilitate rapid bone bridging in critical sized defects in a sheep model. An inverse trabecular pattern based on micro-CT scans of sheep trabecular bone was printed in polybutylene terephthalate. Scaffolds were coated with micron-sized tricalcium phosphate particles to induce osteoconductivity. Mesenchymal stem cells (MSCs) were isolated from sheep inguinal and tail fat, in one group of sheep and scaffolds were infiltrated with MSCs in a bioreactor. Controls did not undergo surgery for cell extraction. Scaffolds were implanted into two experimental and two control adult sheep, and followed for either 3 or 6 months. Monthly radiographs and post explant micro-CT scanning demonstrated bone formation on the lateral, anterior, medial, and posterior-medial aspects along the entire length of the defect. Bone formation was absent on the posterior-lateral aspect where a muscle is generally attached to the bone. The 3-month time point showed 15.5% more cortical bone deposition around the scaffold circumference while the 6-month time point showed 40.9% more bone deposition within scaffold pores. Control sheep failed to unite. Serum collagen type-1C-terminus telopeptides (CTX-1) showed time-dependent levels of bone resorption, and calcein labeling demonstrated an increase in bone formation rate in treated animals compared with controls. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 242-252, 2019.

ß-TCP bone substitutes in tibial plateau depression fractures

BACKGROUND

The use of beta-tricalciumphospate (ß-TCP, Cerasorb®) ceramics as an alternative for autologous bone-grafting has been outlined previously, however with no study focusing on both clinical and histological outcomes of ß-TCP application in patients with multi-fragment tibial plateau fractures. The aim of this study was to analyze the long-term results of ß-TCP in patients with tibial plateau fractures.

METHODS

52 patients were included in this study. All patients underwent open surgery with ß-TCP block or granulate application. After a mean follow-up of 36months (14-64months), the patients were reviewed. Radiography and computed-tomography were performed, while the Rasmussen score was obtained for clinical outcome. Furthermore, seven patients underwent biopsy during hardware removal, which was subsequently analyzed by histology and backscattered electron microscopy (BSEM).

RESULTS

An excellent reduction with two millimeters or less of residual incongruity was achieved in 83% of the patients. At follow-up, no further changes occurred and no nonunions were observed. Functional outcome was good to excellent in 82%. Four patients underwent revision surgery due to reasons unrelated to the bone substitute material. Histologic analyses indicated that new bone was built around the ß-TCP-grafts, however a complete resorption of ß-TCP was not observed.

DISCUSSION

ß-TCP combined with internal fixation represents an effective and safe treatment of tibial plateau depression fractures with good functional recovery. While its osteoconductivity seems to be successful, the biological degradation and replacement of ß-TCP is less pronounced in humans than previous animal studies have indicated.

Dose effects of beta-tricalcium phosphate nanoparticles on biocompatibility and bone conductive ability of three-dimensional collagen scaffolds

Three-dimensional collagen scaffolds coated with beta-tricalcium phosphate (β-TCP) nanoparticles reportedly exhibit good bioactivity and biodegradability. Dose effects of β-TCP nanoparticles on biocompatibility and bone forming ability were then examined. Collagen scaffold was applied with 1, 5, 10, and 25 wt% β-TCP nanoparticle dispersion and designated TCP1, TCP5, TCP10, and TCP25, respectively. Compressive strength, calcium ion release and enzyme resistance of scaffolds with β-TCP nanoparticles applied increased with β-TCP dose. TCP5 showed excellent cell-ingrowth behavior in rat subcutaneous tissue. When TCP10 was applied, osteoblastic cell proliferation and rat cranial bone augmentation were greater than for any other scaffold. The bone area of TCP10 was 7.7-fold greater than that of non-treated scaffold. In contrast, TCP25 consistently exhibited adverse biological effects. These results suggest that the application dose of β-TCP nanoparticles affects the scaffold bioproperties; consequently, the bone conductive ability of TCP10 was remarkable.

Periodontal tissue engineering by nano beta-tricalcium phosphate scaffold and fibroblast growth factor-2 in one-wall infrabony defects of dogs

BACKGROUND AND OBJECTIVE

Nanoparticle bioceramics are being investigated for biomedical applications. We fabricated a regenerative scaffold comprising type I collagen and beta-tricalcium phosphate (β-TCP) nanoparticles. Fibroblast growth factor-2 (FGF-2) is a bioeffective signaling molecule that stimulates cell proliferation and wound healing. This study examined the effects, on bioactivity, of a nano-β-TCP/collagen scaffold loaded with FGF-2, particularly on periodontal tissue wound healing.

MATERIAL AND METHODS

Beta-tricalcium phosphate was pulverized into nanosize particles (84 nm) and was then dispersed. A nano-β-TCP scaffold was prepared by coating the surface of a collagen scaffold with a nanosize β-TCP dispersion. Scaffolds were characterized using scanning electron microscopy, compressive testing, cell seeding and rat subcutaneous implant testing. Then, nano-β-TCP scaffold, nano-β-TCP scaffold loaded with FGF-2 and noncoated collagen scaffold were implanted into a dog one-wall infrabony defect model. Histological observations were made at 10 d and 4 wk postsurgery.

RESULTS

Scanning electron microscopy images show that TCP nanoparticles were attached to collagen fibers. The nano-β-TCP scaffold showed higher compressive strength and cytocompatibility compared with the noncoated collagen scaffold. Rat subcutaneous implant tests showed that the DNA contents of infiltrating cells in the nano-β-TCP scaffold and the FGF-2-loaded scaffold were approximately 2.8-fold and 3.7-fold greater, respectively, than in the collagen scaffold. Histological samples from the periodontal defect model showed about five-fold greater periodontal tissue repair following implantation of the nano-β-TCP scaffold loaded with FGF-2 compared with the collagen scaffold.

CONCLUSION

The β-TCP nanoparticle coating strongly improved the collagen scaffold bioactivity. Nano-β-TCP scaffolds containing FGF-2 are anticipated for use in periodontal tissue engineering.

Bone augmentation using a new injectable bone graft substitute by combining calcium phosphate and bisphosphonate as composite--an animal model

Objective

The aim of this study was to create a new injectable bone graft substitute by combining the features of calcium phosphate and bisphosphonate as a composite bone graft to support bone healing and to evaluate the effect of alendronate to the bone healing process in an animal model.

Material and method

In this study, 24 New Zealand white rabbits were randomly divided into two groups: a calcium phosphate alendronate group and a calcium phosphate control group. A defect was created at the proximal medial tibia and filled with the new created injectable bone graft substitute calcium phosphate alendronate or with calcium phosphate. Healing process was documented by fluoroscopy. To evaluate the potential of the bone graft substitute, the proximal tibia was harvested 2, 4, and 12 weeks after operation. Histomorphological analysis was focused on the evaluation of the dynamic bone parameters using the Osteomeasure system.

Results

Radiologically, the bone graft materials were equally absorbed. No fracture was documented. The bones healed normally. After 2 weeks, the histological analysis showed an increased new bone formation for both materials. The osteoid volume per bone volume (OV/BV) was significantly higher for the calcium phosphate group. After 4 weeks, the results were almost equal. The trabecular thickness (Tb.Th) increased in comparison to week 2 in both groups with a slight advantage for the calcium phosphate group. The total mass of the bone graft (KEM.Ar) and the bone graft substitute surface density (KEM.Pm) were consistently decreasing. After 12 weeks, the new bone volume per tissue volume (BV/TV) was still constantly growing. Both bone grafts show a good integration. New bone was formed on the surface of both bone grafts. The calcium phosphate as well as the calcium phosphate alendronate paste had been enclosed by the bone. The trabecular thickness was higher in both groups compared to the first time point.

Conclusion

Calcium phosphate proved its good potential as a bone graft substitute. Initially, the diagrams seem to show a tendency that alendronate improves the known properties of calcium phosphate as a bone graft substitute. The composite graft induced a good and constant new bone formation. Not only the graft was incorporated into the bone but also a new bone was formed on its surface. But we could not prove a significant difference between the grafts. Both implants proved their function as a bone graft substitute, but the bisphosphonate alendronate does not support the bone healing process sufficiently that the known properties of calcium phosphate as a bone graft substitute were improved in the sense of a composite graft. In this study, alendronate used as a bone graft in a healthy bony environment did not influence the bone healing process in a positive or negative way.

Bone substitutes and implantation depths for subchondral bone repair in osteochondral defects of porcine knee joints

PURPOSE

The purpose of this study was to identify the optimal material and implantation method for subchondral bone repair.

METHODS

Four osteochondral defects in a femoral groove were created in both knees of 12 pigs, and the total number of defects was 96. Eight defects were left empty (empty group). Beta-tricalcium phosphate (β-TCP) bone substitutes with 75 and 67 % porosity were implanted in 30 and 29 defects, respectively (β-TCP75 and β-TCP67 groups). Hydroxyapatite (HA) bone substitutes with 75 % porosity were filled in 29 defects (HA group). Bone substitutes were implanted at 0, 2, or 4 mm below the subchondral bone plate (SBP). The reparative tissue was assessed using microfocus computed tomography and histology 3 months after implantation.

RESULTS

Regardless of the kind of bone substitutes, the defects were filled almost completely after implanting them at the level of the SBP, while the defects remained after implanting them at 2 or 4 mm below the SBP. Reparative tissue of the β-TCP75 group was similar to the normal cancellous bone, while that of the β-TCP67 or HA group was not.

CONCLUSIONS

Subchondral bone defects were filled almost completely only when bone substitutes were implanted at the level of the SBP. The reparative tissue after implanting the β-TCP bone substitutes with 75 % porosity was the most similar to the normal cancellous bone. Therefore, implanting the β-TCP bone substitutes with 75 % porosity at the level of the SBP could be recommended as a treatment method for subchondral bone repair in osteochondral defects.

LEVEL OF EVIDENCE

I.

Effect of platelet rich fibrin and beta tricalcium phosphate on bone healing. A histological study in pigs

PURPOSE

To investigate the effect of platelet rich fibrin (PRF) and beta tricalcium phosphate (β-TCP), alone or in combination, on bone regeneration in pig tibial defects.

METHODS

Four standardized defects were prepared in both tibias of three adult male pigs. The first defect was left unfilled as a control; the others were grafted with either PRF, β-TCP or PRF mixed with β-TCP. All animals were sacrificed on the 12th postoperative week and the tibial bones were removed, histologic sections were prepared and the experimental sites were examined microscopically and stereologically.

RESULTS

Histologic and stereologic examination revealed more new bone formation in the defects filled with PRF mixed β-TCP than in the defects grafted with either β-TCP or PRF alone.

CONCLUSION

The platelet rich fibrin and beta tricalcium phosphate combination effectively induces new bone formation.

Ultrathin sP(EO-stat-PO) hydrogel coatings are biocompatible and preserve functionality of surface bound growth factors in vivo

Hydrogel coatings prepared from reactive star shaped polyethylene oxide based prepolymers (NCO-sP(EO-stat-PO)) minimize unspecific protein adsorption in vitro, while proteins immobilized on NCO-sP(EO-stat-PO) coatings retain their structure and biological function. The aim of the present study was to assess biocompatibility and the effect on early osseointegrative properties of a NCO-sP(EO-stat-PO) coating with additional RGD-peptides and augmentation with bone morphogenetic protein-4 (BMP) used on a medical grade high-density polyethylene (HDPE) base under in vivo circumstances. For testing of biocompatibility dishes with large amounts of bulk NCO-sP(EO-stat-PO) were implanted subcutaneously into 14 Wistar rats. In a second set-up functionalization of implants with ultrathin surface layers by coating ammonia-plasma treated HDPE with NCO-sP(EO-stat-PO), functionalization with linear RGD-peptides, and augmentation with RGD and BMP-4 was analyzed. Therefore, implants were placed subcutaneously in the paravertebral tissue and transcortically in the distal femur of another 14 Wistar rats. Both tests revealed no signs of enhanced inflammation of the surrounding tissue analyzed by CD68, IL-1ß-/TNF-α-antibody staining, nor systemic toxic reactions according to histological analysis of various organs. The mean thickness of the fibrous tissue surrounding the femoral implants was highest in native HDPE-implants and tended to be lower in all NCO-sP(EO-stat-PO) modified implants. Micro-CT analysis revealed a significant increase of peri-implant bone volume in RGD/BMP-4 coated samples. These results demonstrate that even very low amounts of surface bound growth factors do have significant effects when immobilized in an environment that retains their biological function. Hence, NCO-sP(EO-stat-PO)-coatings could offer an attractive platform to improve integration of orthopedic implants.

Metaphyseal bone formation induced by a new injectable β-TCP-based bone substitute: a controlled study in rabbits

PURPOSE

Adequate filling of bone defects still poses a challenge in every day clinical work. As many bone defects are irregularly shaped the need for appropriate scaffolds reaching the complete defect surface are great. The purpose of this pre-clinical pilot study was to investigate the handling, biocompatibility, biodegradation and osteoconductivity of a new pasty bone substitute (pure phase β-TCP, hyaluronic acid, methylcellulose) in bone tissue.

METHODS

In an unilateral tibial defect model the peri-implant and bone tissue response to the new pasty bone substitute was tested in New Zealand white rabbits for up to 24 weeks compared to empty controls. Analysis included HR-pQCT scans, histomorphometric evaluation and quantification of vascularization of un-decalcified histological slices.

RESULTS

After 1 week the experimental group presented significantly higher new bone volume fraction (p = 0.021) primarily consisting of immature bone matrix and higher vessel density compared to controls (p = 0.013). After 4 weeks bone formation was not significantly different to controls but was distributed more evenly throughout the defect. Bone matrix was now mineralized and trabeculae were thicker than in controls (p = 0.002) indicating faster intramedullary bone maturation. Controls presented extensive periosteal bone formation, major fibrous tissue influx and high vascularization. After 12 and 24 weeks there was no new bone detectable. There were no severe signs of inflammation at all time points.

CONCLUSION

The substitute showed an early induction of bone formation. It promoted accelerated intramedullary bone repair and maturation and prevented periosteal bone formation indicating its potential use for reconstructive surgery of bone defects.

In vitro cytotoxicity and in vivo osseointergration properties of compression-molded HDPE-HA-Al2O3 hybrid biocomposites

The aim of this study was to investigate the in vivo biocompatibility in terms of healing of long segmental bone defect in rabbit model as well as in vitro cytotoxicity of eluates of compression-molded High density polyethylene (HDPE)-hydroxyapatite (HA)-aluminum oxide (Al2O3) composite-based implant material. Based on the physical property in terms of modulus and strength properties, as reported in our recent publication, HDPE-40 wt % HA and HDPE-20 wt % HA-20 wt % Al2O3 hybrid composites were used for biocompatibility assessment. Osteoblasts cells were cultured in conditioned media, which contains varying amount of composite eluate (0.01, 0.1, and 1.0 wt %). In vitro, the eluates did not exhibit any significant negative impact on proliferation, mineralization or on morphology of human osteoblast cells. In vivo, the histological assessment revealed neobone formation at the bone/implant interface, characterized by the presence of osteoid and osteoblasts. The observation of osteoclastic activity indicates the process of bone remodeling. No inflammation to any noticeable extent was observed at the implantation site. Overall, the combination of in vitro and in vivo results are suggestive of potential biomedical application of compression-molded HDPE- 20 wt % HA- 20 wt % Al2O3 composites to heal long segmental bone defects without causing any toxicity of bone cells.

Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds

This paper explores the use of selective laser sintering (SLS) for the generation of bone tissue engineering scaffolds from polycaprolactone (PCL) and PCL/tricalcium phosphate (TCP). Different scaffold designs are generated, and assessed from the point of view of manufacturability, porosity and mechanical performance. Large scaffold specimens are produced, with a preferred design, and are assessed through an in vivo study of the critical size bone defect in sheep tibia with subsequent microscopic, histological and mechanical evaluation. Further explorations are performed to generate scaffolds with increasing TCP content. Scaffold fabrication from PCL and PCL/TCP mixtures with up to 50 mass% TCP is shown to be possible. With increasing macroporosity the stiffness of the scaffolds is seen to drop; however, the stiffness can be increased by minor geometrical changes, such as the addition of a cage around the scaffold. In the animal study the selected scaffold for implantation did not perform as well as the TCP control in terms of new bone formation and the resulting mechanical performance of the defect area. A possible cause for this is presented.

A comparative assessment of synthetic ceramic bone substitutes with different composition and microstructure in rabbit femoral condyle model

Various bone substitutes with improved biocompatibility have been developed. Because these products vary in composition and microstructure, it is difficult to understand each feature and make an appropriate selection. Three recently developed highly porous ceramic bone substitutes were evaluated, including two made of hydroxyapatite with different structures (Apaceram-AX: 85%-porosity with micropores, NEOBONE: 75%-porosity without micropores) and one composed of beta-tricalcium phosphate (OSferion: 75%-porosity with micropores) in a rabbit model. Apaceram-AX showed gradual degradation, while NEOBONE remaining intact. OSferion was almost completely degraded at 24 weeks. Numerous osteoclasts were detected in materials with micropores, whether Apaceram-AX or OSferion, but not in NEOBONE. These differences of biodegradability seemed to be related to the presence of micropores. The compressive strength of OSferion increased for several weeks and decreased at a level of cancellous bone. The strength of NEOBONE gradually increased and remained at the highest level among three. The strength of Apaceram-AX increased two to three times that of cancellous bone. Surprisingly, the strength of all materials declined during the initial 1 week, suggesting that great care should be taken in the early period after implantation. These findings may help surgeons to select an appropriate porous substitute based on understanding of their features.

Microporous pure beta-tricalcium phosphate implants for press-fit fixation of anterior cruciate ligament grafts: strength and healing in a sheep model

PURPOSE

A sheep study was conducted to test a press-fit technique using microporous pure beta-tricalcium phosphate (beta-TCP) dowels for fixation of the anterior cruciate ligament (ACL) graft.

METHODS

Microporous (5 mum) cylindrical plugs of beta-TCP (diameter, 7 mm; length, 25 mm) with interconnecting pores were used. The material featured a novel configuration of structure and surface geometry. Implants were tested by use of press-fit fixation of ACL grafts with and without bone blocks in 42 sheep over a period of 24 weeks. Biomechanical, radiologic, histologic, and immunohistochemical evaluations were performed.

RESULTS

In load-to-failure tests at 6, 12, and 24 weeks after surgery, the intra-articular graft always failed, not the fixation. Grafts showed bony fixation in the tunnel at 6 weeks and primary healing at the junction of the tunnel and joint after 24 weeks. Tricalcium phosphate was resorbed and simultaneously replaced by bone. Remodeling was still incomplete at 24 weeks.

CONCLUSIONS

In the sheep model microporous beta-TCP implants used with press-fit fixation of ACL grafts permit early functional rehabilitation. After 6 weeks, the graft is fixed by woven bone or bony integration. Implanted microporous tricalcium phosphate is resorbed and replaced by bone.

CLINICAL RELEVANCE

In a sheep model we showed that primary healing of ACL grafts with resorption and bony replacement of the fixating implant can be achieved by means of press-fit fixation with pure beta-TCP.

Implantation of canine umbilical cord blood-derived mesenchymal stem cells mixed with beta-tricalcium phosphate enhances osteogenesis in bone defect model dogs

This study was performed to evaluate the osteogenic effect of allogenic canine umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs) mixed with beta-tricalcium phosphate (beta-TCP) in orthotopic implantation. Seven hundred milligrams of beta-TCP mixed with 1 x 10(6) UCB-MSCs diluted with 0.5 ml of saline (group CM) and mixed with the same volume of saline as control (group C) were implanted into a 1.5 cm diaphyseal defect and wrapped with PLGC membrane in the radius of Beagle dogs. Radiographs of the antebrachium were made after surgery. The implants were harvested 12 weeks after implantation and specimens were stained with H&E, toluidine blue and Villanueva-Goldner stains for histological examination and histomorphometric analysis of new bone formation. Additionally, UCB-MSCs were applied to a dog with non-union fracture. Radiographically, continuity between implant and host bone was evident at only one of six interfaces in group C by 12 weeks, but in three of six interfaces in group CM. Radiolucency was found only near the bone end in group C at 12 weeks after implantation, but in the entire graft in group CM. Histologically, bone formation was observed around beta-TCP in longitudinal sections of implant in both groups. Histomorphometric analysis revealed significantly increased new bone formation in group CM at 12 weeks after implantation (p < 0.05). When applied to the non-union fracture, fracture healing was identified by 6 weeks after injection of UCB-MSCs. The present study indicates that a mixture of UCB-MSCs and beta-TCP is a promising osteogenic material for repairing bone defects.

Biological activity of recombinant human growth factors released from biocompatible bone implants

The present investigation was performed to study the bioactivity of osteoinductive and osteoproliferative growth factors after release from biocompatible bone implants. Three types of porous carriers were used in this study: hydroxyapatite, alpha tricalcium phosphate, and a neutralized glass ceramic. Implants were loaded with recombinant human bone morphogenetic protein 2 (rh-BMP-2) and recombinant human basic fibroblast growth factor (rh-bFGF) in a concentration of 2 microg/150 microL PBS each. The released growth factors were then applicated into SAOS-2-cell cultures. After 3, 5, and 7 days cell differentiation was measured by the activity of alkaline phosphatase (ALP), cell proliferation by using a MTT assay as well as a cell counter. Rh-BMP-2 released during the first hour from the scaffolds led to a significant increase of the activity of ALP in the incubated SAOS-2-cell culture after 3, 5, and 7 days. However, the incubation with rh-BMP-2 released after 24 h was not found to increase the expression of ALP. The incubation of cell cultures with rh-bFGF released during the first hour led to a significant increase of cell number and of extinction in the MTT assay, whereas this increase was not observed after incubation with rh-bFGF released after 24 h. The in vitro measured biological activity of released growth factors from the surface of synthetic implants is time-depending. If prolonged osteoinductive and osteoproliferative potency of growth factors is desired, a modified application technique should be chosen to stabilize those proteins.

Preparation, characterization and mechanical performance of dense beta-TCP ceramics with/without magnesium substitution

Beta-tricalcium phosphate (beta-TCP) powder was prepared by a two-step process: wet precipitation of apatitic tricalcium phosphate [Ca(9)(HPO(4))(PO(4))(5)(OH)] (beta-TCP 'precursor') and calcination of the precursor at 800 degrees C for 3 h to produce beta-TCP. Magnesium-substituted tricalcium phosphate (beta-TCMP) was produced by adding Mg(NO(3))(2) . 6H(2)O into Ca(NO(3))(2) solution as Mg(2+) source before the precipitation step. The transition temperature from beta-TCP to alpha-TCP increases with the increase of Mg(2+) content in beta-TCMP. beta-TCMP with 3 mol.% Mg(2+) has beta-TCP to alpha-TCP transition temperature above 1,300 degrees C. Dense beta-TCMP (3 mol.% Mg(2+)) ceramics ( approximately 99.4% relative density) were produced by pressing the green bodies at 100 MPa and further sintering at 1,250 degrees C for 2 h. The average compressive strength of dense beta-TCP ceramics sintered at 1,100 degrees C is approximately 540 MPa, while that of beta-TCMP (3 mol.% Mg(2+)) ceramics is approximately 430 MPa.

Conversion of sea urchin spines to Mg-substituted tricalcium phosphate for bone implants

The skeleton of sea urchin spines is composed of large single crystals of Mg-rich calcite, which have smooth, continuously curved surfaces and form a three-dimensional fenestrated mineral network. Spines of the echinoids Heterocentrotus trigonarius and Heterocentrotus mammillatus were converted by the hydrothermal reaction at 180 degrees C to bioresorbable Mg-substituted tricalcium phosphate (beta-TCMP). Due to the presence of Mg in the calcite lattice, conversion to beta-TCMP occurs preferentially to hydroxyapatite formation. The converted beta-TCMP still maintains the three-dimensional interconnected porous structures of the original spine. The main conversion mechanism is the ion-exchange reaction, although there is also a dissolution-reprecipitation process that forms some calcium phosphate precipitates on the surfaces of the spine network. The average fracture strength of urchin spines and converted spines (beta-TCMP) in the compression tests are 42 and 23MPa, respectively. In vivo studies using a rat model demonstrated new bone growth up to and around the beta-TCMP implants after implantation in rat femoral defects for 6 weeks. Some new bone was found to migrate through the spine structural pores, starting from the outside of the implant through the pores at the edge of the implants. These results indicate good bioactivity and osteoconductivity of the porous beta-TCMP implants.

Sinus floor elevation using autogenous bone or bone substitute combined with platelet-rich plasma

OBJECTIVE

Sinus augmentation is a common approach for patients with severe alveolar ridge atrophy. However, autogenous bone sometimes results in donor site complications. Bone substitutes with platelet-rich plasma (PRP) promote early bone formation with autogenous bone. Use of PRP on autogenous bone and a bovine bone substitute were investigated in this split-mouth animal study.

STUDY DESIGN

Premolars were extracted from minipigs. Each animal received sinus augmentation using a lateral approach with simultaneous insertion of 3 implants in each site. Groups were randomized using autogenous bone alone and combined with PRP or a bovine hydroxyapatite alone in combination with PRP.

RESULTS

Microradiographic findings in the autogenous group did not show significantly different rates by using autogenous bone alone or combined with PRP. Using the bovine hydroxyapatite as augmentation material only at 8 weeks, a nonsignificant effect in the PRP group could be seen. At all other observation periods, no significant influence was observed.

CONCLUSION

No significant influence of PRP was found.

Histological and histomorphometrical comparative study of the degradation and osteoconductive characteristics of α- and β-tricalcium phosphate in block grafts

The purpose of the present study was to compare alpha- and beta-tricalcium phosphate (TCP) as bone graft material for augmenting highly resorbed alveolar ridges. The cranial bones of 15 rabbits were used. Three titanium chambers filled with porous blocks of alpha-TCP, beta-TCP, or blood clots were placed in each slit. The two TCP blocks had similar inner/outer structures and purities. Animals were sacrificed after 2, 4, and 8 weeks. Specimens were embedded in polyester resin as nondecalcified specimens, and evaluated both histologically and histomorphometrically. In both TCP groups, blocks had hardly degraded at 2 weeks while in the alpha-TCP group, the block had notably started degrading after 4 weeks. In the beta-TCP group, degradation began at 4 weeks and this degradation had increased just slightly after 8 weeks. The alpha-TCP block degraded significantly more than the beta-TCP block. Residual alpha-TCP particles surrounded by newly formed bone decreased over time, and both particles and newly formed bone were simultaneously absorbed by osteoclast-like cells. These observations suggest that residual alpha-TCP particles surrounded by newly formed bone may disappear progressively from bone and could be incorporated into the bone remodeling cycle in combination with newly formed bone.

Tissue-engineered bone formation using human bone marrow stromal cells and novel beta-tricalcium phosphate

In this study we investigated not only the cellular proliferation and osteogenic differentiation of human bone marrow stromal cells (hBMSCs) on the novel beta-tricalcium phosphate (beta-TCP) scaffolds in vitro but also bone formation by ectopic implantation in athymic mice in vivo. The interconnected porous beta-TCP scaffolds with pores of 300-500 microm in size were prepared by the polymeric sponge method. beta-TCP scaffolds with the dimension of 3 mm x 3 mm x 3 mm were combined with hBMSCs, and incubated with (+) or without (-) osteogenic medium in vitro. Cell proliferation and osteogenic differentiation on the scaffolds were evaluated by scanning electron microscopy (SEM) observation, MTT assay, alkaline phosphatase (ALP) activity and osteocalcin (OCN) content measurement. SEM observation showed that hBMSCs attached well on the scaffolds and proliferated rapidly. No significant difference in the MTT assay could be detected between the two groups, but the ALP activity and OCN content of scaffolds (+) were much higher than those of the scaffolds (-) (p < 0.05). These results indicated that the novel porous beta-TCP scaffolds can support the proliferation and subsequent osteogenic differentiation of hBMSCs in vitro. After being cultured in vitro for 14 days, the scaffolds (+) and (-) were implanted into subcutaneous sites of athymic mice. In beta-TCP scaffolds (+), woven bone formed after 4 weeks of implantation and osteogenesis progressed with time. Furthermore, tissue-engineered bone could be found at 8 weeks, and remodeled lamellar bone was also observed at 12 weeks. However, no bone formation could be found in beta-TCP scaffolds (-) at each time point checked. The above findings illustrate that the novel porous beta-TCP scaffolds developed in this work have prominent osteoconductive activity and the potential for applications in bone tissue engineering.

Synthetic, pure-phase beta-tricalcium phosphate ceramic granules (Cerasorb®) for bone regeneration in the reconstructive surgery of the jaws

The aim of this study was to investigate the long-term effect of the ceramic beta-tricalcium phosphate (beta-TCP) at different sites of alveolar reconstruction and to evaluate its properties. From 1997 to 2002, beta-TCP was implanted as bone substitute in 152 patients using a standardized study protocol. Main indications were the filling of large mandibular cysts (n=52), secondary and tertiary alveolar cleft grafting (n=38), periodontal defects (n=24) and maxillary sinus floor augmentation (n=16). For defects exceeding 2cm in diameter, beta-TCP was combined with autologous bone taken from the retromolar area, the maxillary tuberosity or the chin region. A radiological, clinical and ultrasonographical examination was carried out 4, 12 and 52 weeks postoperative. In 16 cases, biopsies were taken after 12 months indicating complete bony regeneration. While wound-healing disturbances occurred in 9.2% of cases, partial loss of the bone substitute material was found in 5.9%, while total loss occurred in only 2%. Complete radiological replacement of beta-TCP by autologous bone was found after approximately 12 months, indicating its osteoconductive properties. Because of its versatility, low complication rate and good long-term results, synthetic, pure-phase beta-TCP is a suitable material for the filling of bone defects in the alveolar region.