Surface characteristics and biological studies of hydroxyapatite coating by a new method

On the Ion Implantation Synthesis of Ag-Embedded Over Sr-Substituted Hydroxyapatite on a Nano-Topography Patterned Ti for Application in Acetabular Fracture Sites

Introduction

There is an ongoing need for improved healing response and expedited osseointegration on the Ti implants in acetabular fracture sites. To achieve adequate bonding and mechanical stability between the implant surface and the acetabular fracture, a new coating technology must be developed to promote bone integration and prevent bacterial growth.

Methods

A cylindrical Ti substrate mounted on a rotating specimen holder was used to implant Ca2+, P2+, and Sr2+ ions at energies of 100 KeV, 75 KeV and 180 KeV, respectively, using a low-energy accelerator to synthesize strontium-substituted hydroxyapatite at varying conditions. Ag2+ ions of energy 100 KeV were subsequently implanted on the as-formed surface at the near-surface region to provide anti-bacterial properties to the as-formed specimen.

Results

The properties of the as-formed ion-implanted specimen were compared with the SrHA-Ag synthesized specimens by cathodic deposition and low-temperature high-speed collision technique. The adhesion strength of the ion-implanted specimen was 43 ± 2.3 MPa, which is well above the ASTM standard for Ca-P coating on Ti. Live/dead cell analysis showed higher osteoblast activity on the ion-implanted specimen than the other two. Ag in the SrHA implanted Ti by ion implantation process showed superior antibacterial activity.

Discussion

In the ion implantation technique, nano-topography patterned surfaces are not concealed after implantation, and their efficacy in interacting with the osteoblasts is retained. Although all three studies examined the antibacterial effects of Ag2+ ions and the ability to promote bone tissue formation by MC3T3-E1 cells on SrHA-Ag/Ti surfaces, ion implantation techniques demonstrated superior ability. The synthesized specimen can be used as an effective implant in acetabular fracture sites based on their mechanical and biological properties.

Dual response of osteoblast activity and antibacterial properties of polarized strontium substituted hydroxyapatite-Barium strontium titanate composites with controlled strontium substitution

To mimic the electrical properties of natural bone, controlled strontium substitution of both hydroxyapatite and ferroelectric barium titanate were achieved by mixing in the ratio 30:70 by weight. The composites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy to investigate the phase composition and microstructure of the composites. Unpolarized and polarized strontium hydroxyapatite (SrHA)-barium strontium titanate (BST) composites with controlled degree of Sr substitution were examined, including 5SrHA-5BST (5% Sr substitution in both components) and 10SrHA-10BST composites. The 10SrHA-10BST composite showed a higher osteoblast activity, as observed from the cell viability studies performed using CCK-8 assay. The polarized composites showed promise against Staphylococcus aureus bacteria by minimizing the adhesion and growth of bacteria, as compared with their unpolarized counterparts. The polarized 10SrHA-10BST was found to be superior than all other composites. As a result, the approach of polarization of SrHA-BST composites has been found to be an effective bone substitute material in controlled enhancement of osteoblast growth with simultaneous reduction of bacterial infection.

Native Osseous CaP Biomineral Coating on a Biomimetic Multi-Spiked Connecting Scaffold Prototype for Cementless Resurfacing Arthroplasty Achieved by Combined Electrochemical Deposition

The multi-spiked connecting scaffold (MSC-Scaffold) prototype with spikes mimicking the interdigitations of articular subchondral bone is an essential innovation in surgically initiated fixation of resurfacing arthroplasty (RA) endoprosthesis components. This paper aimed to present a determination of the suitable range of conditions for the calcium phosphate (CaP) potentiostatic electrochemical deposition (ECD_V=const) on the MSC-Scaffold prototype spikes to achieve a biomineral coating with a native Ca/P ratio. The CaP ECD_V=const process on the MSC-Scaffold Ti4Al6V pre-prototypes was investigated for potential V_ECDfrom −9 to −3 V, and followed by 48 h immersion in a simulated body fluid. An acid–alkaline pretreatment (AAT) was applied for a portion of the pre-prototypes. Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) studies of deposited coatings together with coatings weight measurements were performed. Themost suitable V_ECD range, from −5.25 to −4.75 V, was determined as the native biomineral Ca/P ratio of coatings was achieved. AAT increases the weight of deposited coatings (44% for V_ECD = −5.25 V, 9% for V_ECD = −5.00 V and 15% for V_ECD = −4.75 V) and the coverage degree of the lateral spike surfaces (40% for V_ECD = −5.25 V, 14% for V_ECD = −5.00 V and 100% for V_ECD = −4.75 V). XRD confirmed that the multiphasic CaP coating containing crystalline octacalcium phosphate is produced on the lateral surface of the spikes of the MSC-Scaffold. ECD_V=const preceded by AAT prevents micro-cracks on the bone-contacting surfaces of the MSC-Scaffold prototype, increases its spikes’ lateral surface coverage, and results in the best modification effect at V_ECD = −5.00 V. To conclude, the biomimetic MSC-Scaffold prototype with desired biomineral coating of native Ca/P ratio was obtained for cementless RA endoprostheses.

Enhanced bone healing in porous Ti implanted rabbit combining bioactive modification and mechanical stimulation

To improve the bone healing efficiency of porous titanium implants, desired biological properties of implants are mandatory, involving bioactivity, osteoconductivity, osteoinductivity and a stable environment. In this study, bare porous titanium (abbr. pTi) with the porosity of 70% was fabricated by vacuum diffusion bonding of titanium meshes. Hydroxyapatite-coated pTi (abbr. Hap-pTi) was obtained by successively subjecting pTi to alkali heat treatment, pre-calcification and simulated body fluid. Both pTi and Hap-pTi were respectively implanted into the tibia defect model (ϕ10 mm × 6 mm) in New Zealand white rabbits, then subjected to non-invasively axial compressive loads at high-magnitude low-frequency (HMLF), which were denoted as F-pTi and F-Hap-pTi, respectively. Bone repairing efficiencies were analyzed by postoperative X-ray examination, optical observation and HE staining after 14 and 30 days of implantation. ALP and OCN contents in serum were also examined at 30 days. Results showed that the sham group and sham group with mechanical stimulation (abbr. F-sham) preferably caused bone fractures. Qualitatively, Hap-pTi reduced the risk of bone fractures and enhanced bone healing slightly more effectively compared to bared pTi. However, both Hap-pTi combined with mechanical stimulation and F-pTi in the case of bioactive modification could result in a higher bone healing efficiency (F-Hap-pTi). The molecular signaling investigation of ALP and OCN contents in serum further revealed a probable synergistic effect of Hap coating coupling with HMLF compression on improving bone repairing efficiency. It provides a candidate of clinically applicable therapy for osseous defects.

Silver doped hydroxyapatite coatings by sacrificial anode deposition under magnetic field

Uniform distribution of silver (Ag) in the hydroxyapatite (HA) coated Ti surface has been a concern for which an attempt has been made to dope Ag in HA coating with and without magnetic field. Cathodic deposition technique was employed to coat Ag incorporated hydroxyapatite coating using a sacrificial silver anode method by using NdFeB bar magnets producing 12 Tesla magnetic field. While uniform deposition of Ag was observed in the coatings under magnetic field, dense coating was evident in the coating without magnetic field conditions. Uniformly distributed Ag incorporated HA in the present study has potential to fight microorganism while providing osseoconduction properties of the composite coating.

Enhanced biocompatibility and osseointegration of calcium titanate coating on titanium screws in rabbit femur

This study aimed to examine the biocompatibility of calcium titanate (CaTiO₃) coating prepared by a simplified technique in an attempt to assess the potential of CaTiO₃ coating as an alternative to current implant coating materials. CaTiO₃-coated titanium screws were implanted with hydroxyapatite (HA)-coated or uncoated titanium screws into medial and lateral femoral condyles of 48 New Zealand white rabbits. Imaging, histomorphometric and biomechanical analyses were employed to evaluate the osseointegration and biocompatibility 12 weeks after the implantation. Histology and scanning electron microscopy revealed that bone tissues surrounding the screws coated with CaTiO₃ were fully regenerated and they were also well integrated with the screws. An interfacial fibrous membrane layer, which was found in the HA coating group, was not noticeable between the bone tissues and CaTiO₃-coated screws. X-ray imaging analysis showed in the CaTiO₃ coating group, there was a dense and tight binding between implants and the bone tissues; no radiation translucent zone was found surrounding the implants as well as no detachment of the coating and femoral condyle fracture. In contrast, uncoated screws exhibited a fibrous membrane layer, as evidenced by the detection of a radiation translucent zone between the implants and the bone tissues. Additionally, biomechanical testing revealed that the binding strength of CaTiO₃ coating with bone tissues was significantly higher than that of uncoated titanium screws, and was comparable to that of HA coating. The study demonstrated that CaTiO₃ coating in situ to titanium screws possesses great biocompatibility and osseointegration comparable to HA coating.

Recent advances in the synthesis, functionalization and biomedical applications of hydroxyapatite: a review

Hydroxyapatite (HA) is a member of the Ca apatite family.

Hydroxyapatite/poly(ɛ-caprolactone) double coating on magnesium for enhanced corrosion resistance and coating flexibility

Hydroxyapatite was deposited on pure magnesium (Mg) with a flexible poly(ɛ-caprolactone) interlayer to reduce the corrosion rate of Mg and enhance coating flexibility. The poly(ɛ-caprolactone) interlayer was uniformly coated on Mg by a spraying method, followed by hydroxyapatite deposition on the poly(ɛ-caprolactone) using an aerosol deposition method. In scanning electron microscopy observations, inorganic/organic composite-like structure was observed between the hydroxyapatite and poly(ɛ-caprolactone) layers, resulting from the collisions of hydroxyapatite particles into the poly(ɛ-caprolactone) matrix at the initial stage of the aerosol deposition. The corrosion resistance of the coated Mg was examined using potentiodynamic polarization tests. The hydroxyapatite/poly(ɛ-caprolactone) double coating remarkably improved the corrosion resistance of Mg in Hank’s solution. In the in vitro cell tests, the coated Mg showed better cell adhesion compared with the bare Mg due to the reduced corrosion rate and enhanced biocompatibility. The stability and flexibility of hydroxyapatite/poly(ɛ-caprolactone) double coating was investigated by scanning electron microscopy inspections after the coated Mg was deformed. The hydroxyapatite coating on the poly(ɛ-caprolactone) interlayer revealed enhanced coating stability and flexibility without cracking or delamination during bending and stretching compared with the hydroxyapatite single coating. These results demonstrated that the hydroxyapatite/poly(ɛ-caprolactone) double coating significantly improved the surface corrosion resistance of Mg and enhanced coating flexibility for use of Mg as a biodegradable implant.

Drug delivery from hydroxyapatite-coated titanium surfaces using biodegradable particle carriers

The goal of this study was to develop a functional titanium (Ti) implant loaded with bioactive molecules using biodegradable polymeric particles as drug delivery carrier for dental applications. In this study, dexamethasone (DEX)-loaded poly(lactic-co-glycolic acid) (PLGA) particles were electrostatically immobilized on a Ti disc surface coated with hydroxyapatite (HA) nanocrystals using a low temperature high speed collision (LTHSC) method. Resorbable blasting media (RBM) Ti discs (S1), HA-Ti discs (S2), and HA-Ti discs treated with DEX-loaded PLGA particles (S3) were fabricated in this study as sample discs. To facilitate surface immobilization, PLGA particles were coated with polyethyleneimine (PEI) to produce a positive surface charge. This modification of PLGA particle surfaces, allowed DEX-loaded PLGA particles to be immobilized on negatively charged S2 disc surface. It was found that DEX-loaded PLGA particles were well dispersed and immobilized onto the S3 disc surfaces. Release profile studies of DEX from S3 discs in a 4-week immersion study indicated an initial burst release followed by sustained release. In vitro evaluation of bone marrow derived mesenchymal stem cells (BMSCs) cultured for 1 and 2 weeks on S3 discs showed greater BMSC differentiation than on S1 or S2 discs, demonstrating that this innovative delivery platform potently induced BMSC differentiation in vitro, and suggesting that it could be exploited for stem cell therapy purposes or to enhance in vivo osteogenesis. In addition, the results of the present study shows that various bioactive molecules that promote bone regeneration can be efficiently incorporated onto HA-Ti surfaces using biodegradable polymeric particles.

Adsorption of HSA, IgG and laminin-1 on model hydroxyapatite surfaces--effects of surface characteristics

Ellipsometry and mechanically assisted sodium dodecyl sulphate elution was utilized to study the adsorption of human serum albumin (HSA), human immunoglobulin G (IgG), and laminin-1, as well as competitive adsorption from a mixture of these proteins on spin-coated and sintered hydroxyapatite (HA) surfaces, respectively. The HA surfaces were characterized with respect to wettability and roughness by means of water contact angles and atomic force microscopy, respectively. Both surface types were hydrophilic, and the average roughness (Sa) and surface enlargement (Sdr) were lower for the sintered compared to the spin-coated HA surfaces. The adsorbed amounts on the sintered HA increased as follows: HSA < laminin-1 < IgG < the protein mixture. For the competitive adsorption experiments, the adsorbed fractions increased accordingly: HSA < laminin-1 < IgG on both types of HA substratum. However, a higher relative amount of HSA and laminin-1 and a lower relative amount of IgG was found on the spin-coated surfaces compared to the sintered surfaces. The effects observed could be ascribed to differences in surface roughness and chemical composition between the two types of HA substratum, and could have an influence on selection of future implant surface coatings.