Assessing near infrared optical properties of ceramic orthodontic brackets using cross-polarization optical coherence tomography

Optimization of X-ray Investigations in Dentistry Using Optical Coherence Tomography

The most common imaging technique for dental diagnoses and treatment monitoring is X-ray imaging, which evolved from the first intraoral radiographs to high-quality three-dimensional (3D) Cone Beam Computed Tomography (CBCT). Other imaging techniques have shown potential, such as Optical Coherence Tomography (OCT). We have recently reported on the boundaries of these two types of techniques, regarding. the dental fields where each one is more appropriate or where they should be both used. The aim of the present study is to explore the unique capabilities of the OCT technique to optimize X-ray units imaging (i.e., in terms of image resolution, radiation dose, or contrast). Two types of commercially available and widely used X-ray units are considered. To adjust their parameters, a protocol is developed to employ OCT images of dental conditions that are documented on high (i.e., less than 10 μm) resolution OCT images (both B-scans/cross sections and 3D reconstructions) but are hardly identified on the 200 to 75 μm resolution panoramic or CBCT radiographs. The optimized calibration of the X-ray unit includes choosing appropriate values for the anode voltage and current intensity of the X-ray tube, as well as the patient’s positioning, in order to reach the highest possible X-rays resolution at a radiation dose that is safe for the patient. The optimization protocol is developed in vitro on OCT images of extracted teeth and is further applied in vivo for each type of dental investigation. Optimized radiographic results are compared with un-optimized previously performed radiographs. Also, we show that OCT can permit a rigorous comparison between two (types of) X-ray units. In conclusion, high-quality dental images are possible using low radiation doses if an optimized protocol, developed using OCT, is applied for each type of dental investigation. Also, there are situations when the X-ray technology has drawbacks for dental diagnosis or treatment assessment. In such situations, OCT proves capable to provide qualitative images.

Detection and analyzing plane of non-cavitated approximal caries by cross-polarized optical coherence tomography (CP-OCT)

OBJECTIVE

The objective was to assess the detection ability and the effect of analyzing plane of CP-OCT for non-cavitated approximal caries.

METHODS

Thirty human extracted premolars were selected based on micro-computed tomography [μ-CT: μ- CT = 0: sound (n = 12), μ-CT = 1/2: caries into outer-/inner-half of enamel (n = 6 each), μ-CT = 3: caries into outer one-third of dentine (n = 6)]. Teeth were mounted in a custommade device to simulate approximal contact, and scanned from the marginal ridge above the contact area. CP-OCT images were analyzed by deepest caries extension from horizontal and coronal planes, and repeated 48-hrs later. Sensitivity, specificity,percent correct, area under the ROC curve (Az), intra-examiner repeatability and correlation with μ-CT were determined.

RESULTS

Sensitivity/specificity/Az for Horizontalplane, Coronal-plane, and Deepest from both planes were 94percent/58percent/0.76,81percent/100percent/0.90, and 94 %/58 %/0.82. Coronal-plane had significantly higher specificity than Horizontal-plane and Deepest (p = 0.004) but Horizontal-plane and Deepest were not different (p = 1.00). Horizontal-plane had significantly lower Az than Deepest (p = 0.048), but Coronal-plane was not different than Horizontal-plane (p = 0.07) or Deepest (p = 0.20). Correlation coefficients were Horizontal-plane (0.53, p < 0.001), Coronal-plane (0.84, p < 0.001), and Deepest (0.66, p < 0.001).

CONCLUSION

Within the limitations of this study, CP-OCT could be used to detect non-cavitated approximal caries. Analysis using the Coronal-plane is superior to the Horizontal-plane.

CLINICAL SIGNIFICANCE

It is challenging to detect non-cavitated approximal caries clinically due to the adjacent tooth. CP-OCT is a nondestructive, no ionized-radiation caries detection technique. CP-OCT seems suitable to detect non-cavitated approximal caries and observing the Coronal-plane appears better than Horizontal-plane.

Optical Coherence Tomography Investigations and Modeling of the Sintering of Ceramic Crowns

Dental prostheses are sintered in ovens that sometimes suffer from a loss of calibration. This can lead to variations of the sintering temperature outside the range recommended by the manufacturer. Stress and even fractures in dental ceramics may occur, and this leads to the necessity to rebuild the dental construct. The aim of this work is to monitor the quality of sintering processes using an established biomedical imaging technique-optical coherence tomography (OCT). Conventional current procedures imply the fabrication of supplemental samples that add to the expenses and are only evaluated visually. To our knowledge, we were the first to propose the use of OCT, a non-destructive method that brings objectivity for such assessments, focusing, in a previous study, on metal ceramic dental prostheses. Here, a different material, pressed ceramics, is considered, while we propose a quantitative assessment of the results-using reflectivity profiles of en-face (i.e., constant-depth) OCT images of sintered samples. The results for both the pressed ceramics and metal ceramics prostheses are discussed by obtaining the analytic functions of their reflectivity profiles. A multi-parametric analysis demonstrates the best parameter to characterize the loss of calibration of dental ovens. Rules-of-thumb are extracted; producing dental prostheses with defects can thus be avoided.

The effect of base material composition on demineralization assessment in CPOCT dental imaging

Cross-polarization optical coherence tomography (CP-OCT) is a promising imaging modality to detect demineralization under the margins of composite restorations. The aim of this study was to assess how base materials applied under composite resin may affect CP-OCT image assessment. Base materials are commonly used for managing deep dentinal decay but once applied residual amounts of the base materials can be inadvertently left on the inner enamel walls. This study determined that base materials have significantly different scattering properties. The order grouping in the mean backscattered reflectivity (mR) of the base material was Dycal>caries phantom>Fuji IX, Vitrebond, Fuji II (p<0.05). The calcium hydroxide base (Dycal) had a higher mR than demineralized dentin and Vitrebond before and after the resin restoration was placed (p<0.05). While calcium hydroxide maybe a confounder in CPOCT imaging, several protective base materials are compatible with this type of imaging modality.

The Use of Optical Coherence Tomography in Dental Diagnostics: A State-of-the-Art Review

Optical coherence tomography provides sections of tissues in a noncontact and noninvasive manner. The device measures the time delay and intensity of the light scattered or reflected from biological tissues, which results in tomographic imaging of their internal structure. This is achieved by scanning tissues at a resolution ranging from 1 to 15 μm. OCT enables real-time in situ imaging of tissues without the need for biopsy, histological procedures, or the use of X-rays, so it can be used in many fields of medicine. Its properties are not only particularly used in ophthalmology, in the diagnosis of all layers of the retina, but also increasingly in cardiology, gastroenterology, pulmonology, oncology, and dermatology. The basic properties of OCT, that is, noninvasiveness and low wattage of the used light, have also been appreciated in analytical technology by conservators, who use it to identify the quality and age of paintings, ceramics, or glass. Recently, the OCT technique of visualization is being tested in different fields of dentistry, which is depicted in the article.