PMMA-hydroxyapatite composite material retards fatigue failure of augmented bone compared to augmentation with plain PMMA: in vivo study using a sheep model

A composite of polymethylmethacrylate, hydroxyapatite, and β-tricalcium phosphate for bone regeneration in an osteoporotic rat model

The purpose of this study was to test several modifications of the polymethylmethacrylate (PMMA) bone cement by incorporating osteoconductive and biodegradable materials for enhancing bone regeneration capacity in an osteoporotic rat model. Three bio-composites (PHT-1 [80% PMMA, 16% HA, 4% β-TCP], PHT-2 [70% PMMA, 24% HA, 6% β-TCP], and PHT-3 [30% PMMA, 56% HA, 14% β-TCP]) were prepared using different concentrations of PMMA, hydroxyapatite (HA), and β-tricalcium phosphate (β-TCP). Their morphological structure was then examined using a scanning electron microscope (SEM) and mechanical properties were determined using a MTS 858 Bionics test machine (MTS, Minneapolis, MN, USA). For in vivo studies, 35 female Wister rats (250 g, 12 weeks of age) were prepared and divided into five groups including a sham group (control), an ovariectomy-induced osteoporosis group (OVX), an OVX with pure PMMA group (PMMA), an OVX with PHT-2 group (PHT-2), and an OVX with PHT-3 group (PHT-3). In vivo bone regeneration efficacy was assessed using micro-CT and histological analysis after injecting the prepared bone cement into the tibial defects of osteoporotic rats. SEM investigation showed that the PHT-3 sample had the highest porosity and roughness among all samples. In comparison to other samples, the PHT-3 exhibited favorable mechanical properties for use in vertebroplasty procedures. Micro-CT and histological analysis of OVX-induced osteoporotic rats revealed that PHT-3 was more effective in regenerating bone and restoring bone density than other samples. This study suggests that the PHT-3 bio-composite can be a promising candidate for treating osteoporosis-related vertebral fractures.

Mineralized collagen-modified PMMA cement enhances bone integration and reduces fibrous encapsulation in the treatment of lumbar degenerative disc disease

As a minimally invasive surgery, percutaneous cement discoplasty (PCD) is now contemplated to treat lumbar disc degeneration disease in elder population. Here, we investigated whether the osteogenic mineralized collagen (MC) modified polymethylmethacrylate (PMMA) cement could be a suitable material in PCD surgery. Injectability, hydrophilicity and mechanical properties of the MC-modified PMMA (PMMA-MC) was characterized. The introduction of MC did not change the application and setting time of PMMA and was easy to be handled in minimally invasive operation. Hydrophilicity of PMMA-MC was greatly improved and its elastic modulus was tailored to complement mechanical performance of bone under dynamic stress. Then, PCD surgery in a goat model with induced disc degeneration was performed with implantation of PMMA-MC or PMMA. Three months after implantation, micro-computed tomography analysis revealed a 36.4% higher circumferential contact index between PMMA-MC and bone, as compared to PMMA alone. Histological staining confirmed that the surface of PMMA-MC was in direct contact with new bone, while the PMMA was covered by fibrous tissue. The observed gathering of macrophages around the implant was suspected to be the cause of fibrous encapsulation. Therefore, the interactions of PMMA and PMMA-MC with macrophages were investigated in vitro. We discovered that the addition of MC could hinder the proliferation and fusion of the macrophages. Moreover, expressions of fibroblast-stimulating growth factors, insulin-like growth factor, basic fibroblast growth factor and tumor necrosis factor-β were significantly down-regulated in the macrophages cocultured with PMMA-MC. Together, the promoted osteointegration and reduced fibrous tissue formation observed with PMMA-MC material makes it a promising candidate for PCD surgery.

Augmented Fixation for Fractures of the Appendicular Skeleton

Despite advances in technology such as locked plating, osteoporotic bone and bone defects remain challenging complications for orthopaedic surgeons. The concept of augmented fixation is useful in these settings. Augmented fixation can be described as improving construct strength and stability by enhancing the surrounding environment. By understanding and using the techniques of alternative fixation strategies, endosteal or medullary support, structural grafting, or the use of bone graft substitutes in combination with standard or integrated fixation, surgeons can improve the chances of success when treating difficult fractures. The purpose of this article is to introduce the reader to the concept of augmented fixation, review strategies for its application, and review applicable published results.

Mineralized Collagen Modified Polymethyl Methacrylate Bone Cement for Osteoporotic Compression Vertebral Fracture at 1-Year Follow-up

STUDY DESIGN

Retrospective comparative study.

OBJECTIVE

This study aimed to compare the clinical effects and imaging features of polymethyl methacrylate (PMMA) bone cement with and without mineralized collagen (MC) in percutaneous kyphoplasty (PKP) for osteoporotic vertebral compression fractures (OVCFs).

SUMMARY OF BACKGROUND DATA

PKP with PMMA is widely performed for OVCF. However, numerous complications have also been reported about the PMMA bone cement. Moreover, PMMA bone cement with and without MC have not been compared with respect to their postoperative efficacy and long-term follow-up.

METHODS

From July 2016 to July 2017, 105 OVCF patients were randomly divided into two groups based on their PKP treatment: MC-PMMA group and PMMA group. Clinical operation, cement leakage, Oswestry Disability Index, visual analog scale, height of the fractured vertebrae, Cobb angle, refracture of the adjacent vertebra, recompression, and computed tomography values of the injured vertebra were compared between the two groups postoperatively and after 1-year follow-up.

RESULTS

Clinical operation showed no differences between the two groups. Visual analog scale scores, Oswestry Disability Index scores, and Cobb angles showed statistically significant differences between the two groups after 1-year follow-up. The height of the vertebral body showed significant difference at 3 days postoperatively and preoperatively in each group and significant difference after 1 year between the two groups. The rate of refracture and leakage of the MC-PMMA group was lower than that of the PMMA group. The computed tomography value of the MC-PMMA group was obviously higher than that of the PMMA group after 1-year follow-up.

CONCLUSION

MC-modified PMMA did not change the beneficial properties of PMMA. This new bone cement has better biocompatibility, can form a stable structure in the vertebral body, and improve the prognosis of patients by reducing pain and reoperation.

LEVEL OF EVIDENCE

3.

Healing potentials of polymethylmethacrylate bone cement combined with platelet gel in the critical-sized radial bone defect of rats

Polymethylmethacrylate (PMMA) is the most commonly used filler material that lacks biological properties and osteoconductivity or osteoinductivity. Platelet gel (PG) is a typical source of growth factors, cytokines and molecules efficient for bone formation and remodeling. The aim of this study was to evaluate bone healing and regeneration of bone defect in rat model by combining PMMA with PG. A total of 50 defects were created in the diaphysis of the radii of 25 male Sprague-Dawley rats. These defects were randomly divided into five groups (n = 10 defects for each group) and treated by autograft, plain PMMA, PG and PMMA-PG or left untreated. The rats were examined clinically and radiologically during the experiment and also after euthanasia at the 8^th post-operative week, the healed defects were evaluated by gross morphology, histopathology, histomorphometry, computed tomography, scanning electron microscopy and biomechanical testing. PG could function as efficiently as autograft in promoting bone healing of the radial bones. Additionally, bone formation, and densities of cartilaginous and osseous tissues in the defects treated with autograft, PG and PMMA-PG were more satisfactory than the untreated and PMMA treated defects. Compared with the PMMA-PG implant, more PMMA residuals remained in the defect area and induced more intense inflammatory reaction. In conclusion, addition of PG could improve the bone regenerative properties of PMMA bone cement compared with PMMA alone in vivo. Therefore, the PG-PMMA can be proposed as a promising option to increase regenerative potential of PMMA, particularly when it is used as fixator, filler or adhesive in the dentistry, neurosurgery and bone tissue engineering applications.

Orthopedic application of spikenard herbal rhizome decorated microstructured polymer biocomposites and their in vitro cytotoxicity

The present study explores the synthesis of highly potential polymer biocomposite from Nardostachys jatamansi rhizome extract. The polymer biocomposites were synthesized from methyl methacrylate by free radical polymerization. ATR-IR enunciate the functional groups attributed at 956 cm-1 (aromatic), a peak appeared at 1685 cm-1 (-C[bond, double bond]O), 1186 cm-1 (-O-CH3), 1149 cm-1 (-C-O-C) framework and 1279 cm-1 (-C-O), which are good agreement for the formation composites. The quantitative evaluations of antimicrobial studies were analyzed by serial dilution method and also improved activity in orthopedic infection pathogens. Cytocompatibility was analyzed by keratinocyte cell lines and it may be used for various biomedical applications.

A Novel, Minimally-Invasive Approach to Repair Degenerative Disk Disease in an Ovine Model Using Injectable Polymethyl-Methacrylate and Bovine Collagen (PMMA/BC)

BACKGROUND

The natural, inflammatory repair processes of an injured intervertebral degenerative disc can propagate further injury and destruction. While there are many different treatment modalities of the pain related to degenerative disc disease, none are actually reparative in nature. Treatment strategies to repair a degenerative disc without inducing a destructive inflammatory milieu have been elusive. 

PURPOSE

The purpose of this experiment is to discover the feasibility of reconstructing an injured intervertebral disc using an injected, inert polymer as the foundation for endogenous collagen growth.

STUDY DESIGN

In this ovine model of six subjects in total, we introduce a modality where a large inert polymer, polymethyl methacrylate (PMMA), in conjunction bovine collagen (BC) is injected into the intervertebral disc. Following six months of observation, histologic specimens were evaluated macroscopically and microscopically for evidence of a benefit of the injectable PMMA/BC.

METHODS

We obtained six merino sheep for this study. Concentric injuries were made to four of their lumbar intervertebral discs. Two of those levels were treated with a percutaneous injection of 0.3 cc of PMMA/BC. The remaining lumbar levels were left untreated and were our controls. After six months, all subjects were sacrificed. Their four levels were extracted and were examined macroscopically and microscopically.

RESULTS

All subjects tolerated the lumbar injury and percutaneous injection of PMMA/BC well. After the six month interval, all subjects have demonstrated an intact architecture of their lumbar disc height at the macroscopic and microscopic level. Microscopically, there was no evidence of external migration of the PMMA/BC microspheres, nor was there any evidence of an inflammatory response by its presence. Notably, the PMMA/BC microspheres were well-incorporated into the concentric disc tears and had undergone endogenous collagen formation in its environment. Treatment levels were revealing for maintenance of disc height without evidence of an ongoing degeneration. The controlled levels were revealing for continued disc degeneration with loss of disc height and evolving injury at the level of the concentric tear.

CONCLUSIONS

This ovine model demonstrates a novel and promising technique for prevention and arrest of lumbar intervertebral disc degeneration.

When 1+1>2: Nanostructured composites for hard tissue engineering applications

Multicomponent, synergistic and multifunctional nanostructures have taken over the spotlight in the realm of biomedical nanotechnologies. The most prospective materials for bone regeneration today are almost exclusively composites comprising two or more components that compensate for the shortcomings of each one of them alone. This is quite natural in view of the fact that all hard tissues in the human body, except perhaps the tooth enamel, are composite nanostructures. This review article highlights some of the most prospective breakthroughs made in this research direction, with the hard tissues in main focus being those comprising bone, tooth cementum, dentin and enamel. The major obstacles to creating collagen/apatite composites modeled after the structure of bone are mentioned, including the immunogenicity of xenogeneic collagen and continuously failing attempts to replicate the biomineralization process in vitro. Composites comprising a polymeric component and calcium phosphate are discussed in light of their ability to emulate the soft/hard composite structure of bone. Hard tissue engineering composites created using hard material components other than calcium phosphates, including silica, metals and several types of nanotubes, are also discoursed on, alongside additional components deliverable using these materials, such as cells, growth factors, peptides, antibiotics, antiresorptive and anabolic agents, pharmacokinetic conjugates and various cell-specific targeting moieties. It is concluded that a variety of hard tissue structures in the body necessitates a similar variety of biomaterials for their regeneration. The ongoing development of nanocomposites for bone restoration will result in smart, theranostic materials, capable of acting therapeutically in direct feedback with the outcome of in situ disease monitoring at the cellular and subcellular scales. Progress in this research direction is expected to take us to the next generation of biomaterials, designed with the purpose of fulfilling Daedalus' dream - not restoring the tissues, but rather augmenting them.

Calcium Orthophosphate-Containing Biocomposites and Hybrid Biomaterials for Biomedical Applications

The state-of-the-art on calcium orthophosphate (CaPO4)-containing biocomposites and hybrid biomaterials suitable for biomedical applications is presented. Since these types of biomaterials offer many significant and exciting possibilities for hard tissue regeneration, this subject belongs to a rapidly expanding area of biomedical research. Through the successful combinations of the desired properties of matrix materials with those of fillers (in such systems, CaPO4 might play either role), innovative bone graft biomaterials can be designed. Various types of CaPO4-based biocomposites and hybrid biomaterials those are either already in use or being investigated for biomedical applications are extensively discussed. Many different formulations in terms of the material constituents, fabrication technologies, structural and bioactive properties, as well as both in vitro and in vivo characteristics have been already proposed. Among the others, the nano-structurally controlled biocomposites, those containing nanodimensional compounds, biomimetically fabricated formulations with collagen, chitin and/or gelatin, as well as various functionally graded structures seem to be the most promising candidates for clinical applications. The specific advantages of using CaPO4-based biocomposites and hybrid biomaterials in the selected applications are highlighted. As the way from a laboratory to a hospital is a long one and the prospective biomedical candidates have to meet many different necessities, the critical issues and scientific challenges that require further research and development are also examined.

Study of the viability and adhesion of osteoblast cells to bone cements mixed with hydroxyapatite at different concentrations to use in vertebral augmentation techniques

OBJECTIVE

The purpose of this study is to compare the biocompatibility and the effect in osteoblasts of polymethyl methacrylate alone, and mixed with hydroxyapatite in different concentrations of 5, 10, 15 and 20%, without exceeding 20%, as it can alter mechanical properties of the composite.

MATERIAL AND METHODS

Experimental study comparing osteoblast response to Polymethyl methacrylate alone and with hydroxyapatite in different concentrations.

RESULTS

Composites at 15 and 20% obtained better osteoblast response, with higher osteoblastic activity markers, and lower apoptosis markers. Electron microscopy images show improved adhesion of osteoblasts.