Novel porous soy protein-based blend structures for biomedical applications: Microstructure, mechanical, and physical properties

Soy Protein-Based Wound Dressings: A Review of Their Preparation, Properties, and Perspectives

Wound healing is a major challenge worldwide, and people have been researching wound dressings that can promote wound healing for decades. Natural biobased materials, such as polysaccharides and proteins, have been widely used in the development of wound dressings. Among them, soy protein-based materials have attracted the interest of a wide range of researchers due to their safety, biocompatibility, controlled degradation, and ability to be mixed with other materials. However, there has been a lack of comments on these soy protein-based wound dressings. This work reviews various forms of soy protein-based wound dressings, such as hydrogels, films, and others, which could be prepared through physical/chemical cross-linking with synthetic or natural polymers. The important role played by soy protein-based materials in the wound healing phase and their properties will be examined, such as their anti-inflammatory, antioxidant, angiogenesis-promoting, cellular biocompatibility, self-healing ability, adhesion, antimicrobial, and tunable mechanical properties. Additionally, insights into the market prospects and trends for soy protein dressings are provided, clarifying the enormous development potential of soy protein as a new type of wound repair material.

Extraction and characterization of a functional protein from Millettia speciosa Champ. leaf

Natural plant-derived protein with excellent bioactivities has attracted much attention so a functional protein with molecular weight of 15.2 kDa was extracted from Millettia speciosa Champ. leaf for the first time. Under the pH of 12.0, solid-liquid ratio of 1:40 (w/v), extraction time of 2.0 h, and extraction temperature of 50 °C, the highest extracting efficiency (79.25 ± 0.78%) of the Millettia speciosa Champ. leaf protein (MLP) was achieved. The main structure of MLP contained β-fold and β-corner by Fourier transform infrared spectroscopy (FTIR) and Circular dichroism (CD) spectra analysis. Additionally, MLP was predominant with glutamic acid, aspartic acid, and leucine, which could be considered as a high quality natural protein. MLP showed great water holding capacity (WHC), oil absorption capacity (OAC), as well as emulsifying and foaming properties. Simultaneously, MLP exhibited considerable antioxidant activity. These results suggested that MLP could be utilised as a promising ingredient of functional foods.

Purification and Identification of Lipid-Lowering Protein from Barley Extract after Lactiplantibacillus plantarum dy-1 fermentation

Previous studies have found that the protein in barley extract fermented by Lactiplantibacillus plantarum dy-1 has the ability to inhibit lipid accumulation. However, the isolation, purification, and structural identification of the protein with lipid-lowering activity were still needed. In the present study, barley protein fermented by L. plantarum dy-1 with the optimal lipid-lowering ability was isolated and purified in three steps: using ammonium sulfate precipitation, anion-exchange chromatography, and size-exclusion chromatography. Combined with the model of HepG2 cells induced by oleic acid, the results showed that the pure protein LFBEP-C1 had the best lipid-lowering potential. Furthermore, our research found that LFBEP-C1 enriched the content of hydrophobic amino acids in LFBEP-C1. Ultraviolet spectroscopy analysis indicated that the glycosidic bond in LFBEP-C1 was an O-type glycosidic bond. The FTIR and circular dichroism spectra indicated that α-helix and random coil were the main secondary structures of LFBEP-C1. Mass spectrometry determined the theoretical molecular weight of LFBEP-C1 as 48 kDa, and its amino acid coverage was 63%. These findings suggest that the protein LFBEP-C1 with the best lipid-lowering activity was isolated and purified, and its structural characteristics were identified.

Optimization and characterization of a novel tea tree oil-integrated poly (ε-caprolactone)/soy protein isolate electrospun mat as a wound care system

A set of poly (ε-caprolactone)/soy protein isolate (PCL/SPI) mats with different ratios of PCL to SPI was fabricated using the electrospinning method. The mat with PCL to SPI ratio of 95:5 (PS 95:5) had the narrowest nanofibers, the highest percentage of porosity, the lowest swelling ratio, the least vapor transmission, and the slowest degradation rate among the prepared mats. The hemolysis assay indicated that all mats can be considered biocompatible biomaterials. In continue, three different weight ratios of tea tree oil (TTO) were loaded into the PS 95:5 mat. The release profiles illustrated that higher amounts of TTO could be released in an acidic environment. The antioxidant activity of the mats increased by the increase in their TTO content. The cell viability test, cell adhesion images, and live/dead assay of TTO-loaded mats affirmed that all fabricated mats were biocompatible. The scratch wound assay expressed that TTO accelerates the rate of wound closure. The TTO-loaded mats illustrated antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria. The obtained outcomes revealed that TTO-loaded PCL/SPI mats can be considered promising potential wound dressings.

Antibacterial and antioxidant activity of cinnamon essential oil-laden 45S5 bioactive glass/soy protein composite scaffolds for the treatment of bone infections and oxidative stress

This study aimed to fabricate cinnamon essential oil (CO)-laden 45S5 bioactive glass (BG)/soy protein (SP) scaffolds exhibiting antioxidant and antibacterial activity. In this regard, 45S5 BG-based scaffolds were produced by the foam replica method, and subsequently the scaffolds were coated with various concentrations of CO (2.5, 5 and 7 (v/v) %) incorporated SP solution. Scanning electron microscopy images revealed that the CO-laden SP effectively attached to the 45S5 BG scaffold struts. The presence of 45S5 BG, SP and CO was confirmed using Fourier transform infrared spectroscopy. Compressive strength results indicated that SP based coatings improved the scaffolds' mechanical properties compared to uncoated BG scaffolds. The loading efficiency and releasing behaviour of the different CO concentrations were tested by gas chromatography-mass spectroscopy and UV-Vis spectroscopy. The results showed that CO incorporated scaffolds have controlled releasing behaviour over seven days. Furthermore, the coating on the scaffold surfaces slightly retarded, but it did not inhibit, the in vitro bioactivity of the scaffolds. Moreover, the antioxidant and antibacterial activity of CO was studied. The free radical scavenging activity measured by DPPH was 5 ± 1, 41 ± 3, 44 ± 1 and 43 ± 1 % for BGSP, CO2.5, CO5 and CO7, respectively. The antioxidant activity was thus enhanced by incorporating CO. Agar diffusion and colony counting results indicated that the incorporation of CO increased the antibacterial activity of scaffolds against S. aureus and E. coli. In addition, cytotoxicity of the scaffolds was investigated using MG-63 osteoblast-like cells. The results showed that the BG-SP scaffold was non-toxic under the investigated conditions, whereas dose-dependent toxicity was observed in CO-laden scaffolds. Considered together, the developed phytotherapeutic agent laden 45S5 BG-based scaffolds are promising for bone tissue engineering exhibiting capability to combat bone infections and to protect against oxidative stress damage.

Electrospun, sepiolite-loaded poly(vinyl alcohol)/soy protein isolate nanofibers: Preparation, characterization, and their drug release behavior

Wound management and drug release are important applications for electrospun nanofibers. In this study, poly(vinyl alcohol)/soy protein isolate (PVA/SPI) nanofiber mats were produced by electrospinning and used as drug carriers. The mats were loaded with ketoprofen by dissolving the drug in the solutions for nanofiber electrospinning. To improve drug release control of the nanofiber mats, a natural tubular nanoparticle, sepiolite, was used as a secondary release control tool. Three types of nanofiber mats were fabricated by electrospinning the solutions prepared by 1) direct mixing of PVA, SPI, and ketoprofen, 2) direct mixing of PVA, SPI, sepiolite, and ketoprofen, and 3) mixing PVA, SPI, and ketoprofen-preloaded sepiolite. The drug release behavior of the mats was studied using UV-vis spectroscopy and the mechanical properties of the mats were investigated by tensile testing. The results showed that sepiolite had a high impact on the release of ketoprofen, with the drug-loaded sepiolite leading to the slowest release. The incorporation of SPI and sepiolite into the PVA nanofibers also increased the mechanical strength of the mats, making them easier to handle and potentially longer-lasting. This study demonstrated the potential of using natural biomaterials and nanomaterials as the components of controlled-release drug delivery vehicles.

In vitro characterization of novel multidrug-eluting soy protein wound dressings

Polymers derived from natural sources are of interest in the scientific and medical communities, especially soy protein which exhibits low immunogenicity and good mechanical properties, and supports cell proliferation. Soy protein is cost-effective compared to other natural polymers and is attractive also due to its non-animal origin and relatively long storage stability. In the current study, hybrid film structures were developed and studied as a novel wound dressing platform with controlled release of three bioactive agents. The dense top layer is designed to provide mechanical support, control the water vapor permeability and to elute the antibiotic drug cloxacillin and the analgesic drug bupivacaine to the wound site. The porous sub-layer is designed to absorb the wound exudates and release the hemostatic agent tranexamic acid for bleeding control. The results show that the formulation parameters, i.e. crosslinker and plasticizer concentrations, affected the mechanical properties of the wound dressings as well as relevant physical properties (water vapor transmission rate and swelling kinetics), but had almost no effect on the drug-release profiles. While the antibiotic drug and the analgesic drug were released within several hours, the hemostatic agent was released within several minutes, according to the well designed hybrid structure. In conclusion, our novel soy protein hybrid wound dressings are biocompatible, can deliver various drugs simultaneously in a controlled fashion for each drug individually, and can be adjusted to suit various types of wounds by altering their properties through formulation effects.

Innovative Human Three-Dimensional Tissue-Engineered Models as an Alternative to Animal Testing

Animal testing has long been used in science to study complex biological phenomena that cannot be investigated using two-dimensional cell cultures in plastic dishes. With time, it appeared that more differences could exist between animal models and even more when translated to human patients. Innovative models became essential to develop more accurate knowledge. Tissue engineering provides some of those models, but it mostly relies on the use of prefabricated scaffolds on which cells are seeded. The self-assembly protocol has recently produced organ-specific human-derived three-dimensional models without the need for exogenous material. This strategy will help to achieve the 3R principles.

Soy Protein Nanofiber Scaffolds for Uniform Maturation of Human Induced Pluripotent Stem Cell-Derived Retinal Pigment Epithelium

Retinal pigment epithelium (RPE) differentiated from human induced pluripotent stem cells, called induced retinal pigment epithelium (iRPE), is being explored as a cell-based therapy for the treatment of retinal degenerative diseases, especially age-related macular degeneration. The success of RPE implantation is linked to the use of biomimetic scaffolds that simulate Bruch's membrane and promote RPE maturation and integration as a functional tissue. Due to difficulties associated with animal protein-derived scaffolds, including sterility and pro-inflammatory responses, current practices favor the use of synthetic polymers, such as polycaprolactone (PCL), for generating nanofibrous scaffolds. In this study, we tested the hypothesis that plant protein-derived fibrous scaffolds can provide favorable conditions permissive for the maturation of RPE tissue sheets in vitro. Our natural, soy protein-derived nanofibrous scaffolds exhibited a J-shaped stress-strain curve that more closely resembled the mechanical properties of native tissues than PCL with significantly higher hydrophilicity of the natural scaffolds, favoring in vivo implantation. We then demonstrate that iRPE sheets growing on these soy protein scaffolds are equivalent to iRPE monolayers cultured on synthetic PCL nanofibrous scaffolds. Immunohistochemistry demonstrated RPE-like morphology and functionality with appropriate localization of RPE markers RPE65, PMEL17, Ezrin, and ZO1 and with anticipated histotypic polarization of vascular endothelial growth factor and pigment epithelium-derived growth factor as indicated by enzyme-linked immunosorbent assay. Scanning electron microscopy revealed dense microvilli on the cell surface and homogeneous tight junctional contacts between the cells. Finally, comparative transcriptome analysis in conjunction with principal component analysis demonstrated that iRPE on nanofibrous scaffolds, either natural or synthetic, matured more consistently than on nonfibrous substrates. Taken together, our studies suggest that the maturation of cultured iRPE sheets for subsequent clinical applications might benefit from the use of nanofibrous scaffolds generated from natural proteins. Impact statement Induced retinal pigment epithelium (iRPE) from patient-derived induced pluripotent stem cells (iPSCs) may yield powerful treatments of retinal diseases, including age-related macular degeneration. Recent studies, including early human clinical trials, demonstrate the importance of selecting appropriate biomaterial scaffolds to support tissue-engineered iRPE sheets during implantation. Electrospun scaffolds show particular promise due to their similarity to the structure of the native Bruch's membrane. In this study, we describe the use of electroprocessed nanofibrous soy protein scaffolds to generate polarized sheets of human iPSC-derived iRPE sheets. Our evaluation, including RNA-seq transcriptomics, indicates that these scaffolds are viable alternatives to scaffolds electrospun from synthetic polymers.

Status of Plant Protein-Based Green Scaffolds for Regenerative Medicine Applications

In recent decades, regenerative medicine has merited substantial attention from scientific and research communities. One of the essential requirements for this new strategy in medicine is the production of biocompatible and biodegradable scaffolds with desirable geometric structures and mechanical properties. Despite such promise, it appears that regenerative medicine is the last field to embrace green, or environmentally-friendly, processes, as many traditional tissue engineering materials employ toxic solvents and polymers that are clearly not environmentally friendly. Scaffolds fabricated from plant proteins (for example, zein, soy protein, and wheat gluten), possess proper mechanical properties, remarkable biocompatibility and aqueous stability which make them appropriate green biomaterials for regenerative medicine applications. The use of plant-derived proteins in regenerative medicine has been especially inspired by green medicine, which is the use of environmentally friendly materials in medicine. In the current review paper, the literature is reviewed and summarized for the applicability of plant proteins as biopolymer materials for several green regenerative medicine and tissue engineering applications.

Accelerated skin wound healing by soy protein isolate-modified hydroxypropyl chitosan composite films

In this study, a series of hydroxypropyl chitosan (HPCS)/soy protein isolate (SPI) composite films (HCSFs) with different SPI contents were developed via crosslinking, solution casting, and evaporation process. Effects of the SPI content on the structure and physical properties of the HCSFs were characterized by Fourier transform infrared spectroscopy, X-ray diffraction patterns, scanning electron microscopy, swelling kinetics analysis, and mechanical testing. The HCSFs exhibited a lower swelling ratio with an increase in the SPI content. The tensile strength was in a tunable range from 7.88 ± 3.08 to 40.44 ± 2.31 MPa by adjusting the SPI content. Cytocompatibility and hemocompatibility of the HCSFs were evaluated by a series of in vitro assays, including MTT assay, live/dead assay, cell morphology observation, hemolysis ratio testing, and plasma recalcification time measurement. Results showed that the HCSFs support L929 cells attachment and proliferation without obvious hemolysis, indicating good cytocompatibility and hemocompatibility. The potential of resultant HCSFs as the wound dressings was investigated using a full-thickness skin wound model in rats. Results exhibited that the HCSFs with 50% SPI content had the fastest healing speed and the best skin regeneration efficiency and may be a potential candidate as the wound dressing.

Bio-Based Polymers for 3D Printing of Bioscaffolds

Three-dimensional (3D) printing technologies enable not only faster bioconstructs development but also on-demand and customized manufacturing, offering patients a personalized biomedical solution. This emerging technique has a great potential for fabricating bioscaffolds with complex architectures and geometries and specifically tailored for use in regenerative medicine. The next major innovation in this area will be the development of biocompatible and histiogenic 3D printing materials with bio-based printable polymers. This review will briefly discuss 3D printing techniques and their current limitations, with a focus on novel bio-based polymers as 3D printing feedstock for clinical medicine and tissue regeneration.

Biomedical applications of soy protein: A brief overview

Soy protein (SP) based materials are gaining increasing interest for biomedical applications because of their tailorable biodegradability, abundance, being relatively inexpensive, exhibiting low immunogenicity, and for being structurally similar to components of the extracellular matrix (ECM) of tissues. Analysis of the available literature indicates that soy protein can be fabricated into different shapes, being relatively easy to be processed by solvent or melt based techniques. Furthermore soy protein can be blended with other synthetic and natural polymers and with inorganic materials to improve the mechanical properties and the bioactive behavior for several demands. This review discusses succinctly the biomedical applications of SP based materials focusing on processing methods, properties and applications highlighting future avenues for research.