A review of decellurization methods caused by an urgent need for quality control of cell-free extracellular matrix' scaffolds and their role in regenerative medicine

Erythrocyte Membrane Coating Alleviate Immune Response And Promoted Adipogenesis In Adipose Matrix

Xenotransplantation of adipose extracellular matrix (AAM) has come to prominence as an intriguing option for soft tissue reconstruction. However, the presence of immunogenic antigens within AAM can trigger unfavorable immune reactions, leading to inadequate in vivo regeneration outcomes. Therefore, the development of advanced technology capable of modulating immune responses is crucial for the therapeutic implementation of AAM xenografts. In this work, a innovative technique is created to bypass the immune system by covering the surface of both AAM and RGD peptide-modified AAM xenografts with autologous red blood cell (RBC) membrane. The RBC membrane coating remained persistent and exhibited no significant decline even after 21 days. Moreover, it effectively reduced the expression of antigen MHC1 on the AAM surface. Following xenogeneic transplantation, the RBC coated xenografts demonstrated increased expression of the adipogenic factor PPAR-γ and higher numbers of adipocytes. Additionally, they exhibited decreased expression of immunological factors including IL-6, IL-2, IFN-γ and TNF-α, and fewer inflammatory cells. These findings indicate that RBC membrane coating successfully suppressed immune responses and promoted increased adipogenesis in AAM xenografts. Therefore, AAM camouflage coating with RBC has a lot of potential as a biomaterial for soft tissue reconstruction in clinical settings.

Biomaterials-Based Technologies in Skeletal Muscle Tissue Engineering

For many clinically prevalent severe injuries, the inherent regenerative capacity of skeletal muscle remains inadequate. Skeletal muscle tissue engineering (SMTE) seeks to meet this clinical demand. With continuous progress in biomedicine and related technologies including micro/nanotechnology and 3D printing, numerous studies have uncovered various intrinsic mechanisms regulating skeletal muscle regeneration and developed tailored biomaterial systems based on these understandings. Here, the skeletal muscle structure and regeneration process are discussed and the diverse biomaterial systems derived from various technologies are explored in detail. Biomaterials serve not merely as local niches for cell growth, but also as scaffolds endowed with structural or physicochemical properties that provide tissue regenerative cues such as topographical, electrical, and mechanical signals. They can also act as delivery systems for stem cells and bioactive molecules that have been shown as key participants in endogenous repair cascades. To achieve bench-to-bedside translation, the typical effect enabled by biomaterial systems and the potential underlying molecular mechanisms are also summarized. Insights into the roles of biomaterials in SMTE from cellular and molecular perspectives are provided. Finally, perspectives on the advancement of SMTE are provided, for which gene therapy, exosomes, and hybrid biomaterials may hold promise to make important contributions.

Exosome-loaded decellularized tissue: Opening a new window for regenerative medicine

Mesenchymal stem cell-derived exosomes (MSCs-EXO) have received a lot of interest recently as a potential therapeutic tool in regenerative medicine. Extracellular vesicles (EVs) known as exosomes (EXOs) are crucial for cell-cell communication throughout a variety of activities including stress response, aging, angiogenesis, and cell differentiation. Exploration of the potential use of EXOs as essential therapeutic effectors of MSCs to encourage tissue regeneration was motivated by success in the field of regenerative medicine. EXOs have been administered to target tissues using a variety of methods, including direct, intravenous, intraperitoneal injection, oral delivery, and hydrogel-based encapsulation, in various disease models. Despite the significant advances in EXO therapy, various methods are still being researched to optimize the therapeutic applications of these nanoparticles, and it is not completely clear which approach to EXO administration will have the greatest effects. Here, we will review emerging developments in the applications of EXOs loaded into decellularized tissues as therapeutic agents for use in regenerative medicine in various tissues.

Comparison of skeletal muscle decellularization protocols and recellularization with adipose-derived stem cells for tissue engineering

Decellularization is a novel technique employed for scaffold manufacturing, as a strategy for skeletal muscle (SM) tissue engineering applications. However, poor decellularization efficacy is still a problem for the use of decellularized scaffolds as truly biocompatible biomaterials. For recellularization, adipose-derived stem cells (ASCs) are a good option, due to their immunomodulatory and pro-regenerative capacity, but few studies have described their combination with muscle-decellularized matrices (mDMs). This work aimed to evaluate the efficiency of four multi-step decellularization protocols to produce mDMs and to investigate in vitro biocompatibility with ASCs. Here, we described the different efficacies of muscle decellularization methods, suggesting the need for stricter standardization of the method, considering the large range of applications in SM tissue engineering, which is also a promising platform for preclinical studies with rat disease models using autologous cells.

Three-dimensional printing and decellularized-extracellular-matrix based methods for advances in artificial blood vessel fabrication: A review

Blood vessels are the tubes through which blood flows and are divided into three types: millimeter-scale arteries, veins, and capillaries as well as micrometer-scale capillaries. Arteries and veins are the conduits that carry blood, while capillaries are where blood exchanges substances with tissues. Blood vessels are mainly composed of collagen fibers, elastic fibers, glycosaminoglycans and other macromolecular substances. There are about 19 feet of blood vessels per square inch of skin in the human body, which shows how important blood vessels are to the human body. Because cardiovascular disease and vascular trauma are common in the population, a great number of researches have been carried out in recent years by simulating the structures and functions of the person's own blood vessels to create different levels of tissue-engineered blood vessels that can replace damaged blood vessels in the human body. However, due to the lack of effective oxygen and nutrient delivery mechanisms, these tissue-engineered vessels have not been used clinically. Therefore, in order to achieve better vascularization of engineered vascular tissue, researchers have widely explored the design methods of vascular systems of various sizes. In the near future, these carefully designed and constructed tissue engineered blood vessels are expected to have practical clinical applications. Exploring how to form multi-scale vascular networks and improve their compatibility with the host vascular system will be very beneficial in achieving this goal. Among them, 3D printing has the advantages of high precision and design flexibility, and the decellularized matrix retains active ingredients such as collagen, elastin, and glycosaminoglycan, while removing the immunogenic substance DNA. In this review, technologies and advances in 3D printing and decellularization-based artificial blood vessel manufacturing methods are systematically discussed. Recent examples of vascular systems designed are introduced in details, the main problems and challenges in the clinical application of vascular tissue restriction are discussed and pointed out, and the future development trends in the field of tissue engineered blood vessels are also prospected.

O-alg-THAM/gel hydrogels functionalized with engineered microspheres based on mesenchymal stem cell secretion recruit endogenous stem cells for cartilage repair

Lacking self-repair abilities, injuries to articular cartilage can lead to cartilage degeneration and ultimately result in osteoarthritis. Tissue engineering based on functional bioactive scaffolds are emerging as promising approaches for articular cartilage regeneration and repair. Although the use of cell-laden scaffolds prior to implantation can regenerate and repair cartilage lesions to some extent, these approaches are still restricted by limited cell sources, excessive costs, risks of disease transmission and complex manufacturing practices. Acellular approaches through the recruitment of endogenous cells offer great promise for in situ articular cartilage regeneration. In this study, we propose an endogenous stem cell recruitment strategy for cartilage repair. Based on an injectable, adhesive and self-healable o-alg-THAM/gel hydrogel system as scaffolds and a biophysio-enhanced bioactive microspheres engineered based on hBMSCs secretion during chondrogenic differentiation as bioactive supplement, the as proposed functional material effectively and specifically recruit endogenous stem cells for cartilage repair, providing new insights into in situ articular cartilage regeneration.

Characterization of a Decellularized Sheep Pulmonary Heart Valves and Analysis of Their Capability as a Xenograft Initial Matrix Material in Heart Valve Tissue Engineering

In order to overcome the disadvantages of existing treatments in heart valve tissue engineering, decellularization studies are carried out. The main purpose of decellularization is to eliminate the immunogenicity of biologically derived grafts and to obtain a scaffold that allows recellularization while preserving the natural tissue architecture. SD and SDS are detergent derivatives frequently used in decellularization studies. The aim of our study is to decellularize the pulmonary heart valves of young Merino sheep by using low-density SDS and SD detergents together, and then to perform their detailed characterization to determine whether they are suitable for clinical studies. Pulmonary heart valves of 4-6-month-old sheep were decellularized in detergent solution for 24 h. The amount of residual DNA was measured to determine the efficiency of decellularization. Then, the effect of decellularization on the ECM by histological staining was examined. In addition, the samples were visualized by SEM to determine the surface morphologies of the scaffolds. A uniaxial tensile test was performed to examine the effect of decellularization on biomechanical properties. In vitro stability of scaffolds decellularized by collagenase treatment was determined. In addition, the cytotoxic effect of scaffolds on 3T3 cells was examined by MTT assay. The results showed DNA removal of 94% and 98% from the decellularized leaflet and pulmonary wall portions after decellularization relative to the control group. No cell nuclei were found in histological staining and it was observed that the three-layer leaflet structure was preserved. As a result of the tensile test, it was determined that there was no statistically significant difference between the control and decellularized groups in the UTS and elasticity modulus, and the biomechanical properties did not change. It was also observed that decellularized sheep pulmonary heart valves had no cytotoxic effect. In conclusion, we suggest that the pulmonary valves of decellularized young Merino sheep can be used as an initial matrix in heart valve tissue engineering studies.

Comprehensive ex vivo and in vivo preclinical evaluation of novel chemo enzymatic decellularized peripheral nerve allografts

As a reliable alternative to autografts, decellularized peripheral nerve allografts (DPNAs) should mimic the complex microstructure of native nerves and be immunogenically compatible. Nevertheless, there is a current lack of decellularization methods able to remove peripheral nerve cells without significantly altering the nerve extracellular matrix (ECM). The aims of this study are firstly to characterize ex vivo, in a histological, biochemical, biomechanical and ultrastructural way, three novel chemical-enzymatic decellularization protocols (P1, P2 and P3) in rat sciatic nerves and compared with the Sondell classic decellularization method and then, to select the most promising DPNAs to be tested in vivo. All the DPNAs generated present an efficient removal of the cellular material and myelin, while preserving the laminin and collagen network of the ECM (except P3) and were free from any significant alterations in the biomechanical parameters and biocompatibility properties. Then, P1 and P2 were selected to evaluate their regenerative effectivity and were compared with Sondell and autograft techniques in an in vivo model of sciatic defect with a 10-mm gap, after 15 weeks of follow-up. All study groups showed a partial motor and sensory recovery that were in correlation with the histological, histomorphometrical and ultrastructural analyses of nerve regeneration, being P2 the protocol showing the most similar results to the autograft control group.

Preliminary study of improving immune tolerance in vivo of bioprosthetic heart valves through a novel antigenic removal method

The durability of bioprosthetic heart valves is always compromised by the inherent antigenicity of biomaterials. Decellularization has been a promising approach to reducing the immunogenicity of biological valves. However, current methods are insufficient in eliminating all immunogenicity from the biomaterials, necessitating the exploration of novel techniques. In this study, we investigated using a novel detergent, fatty alcohol polyoxyethylene ether sodium sulfate (AES), to remove antigens from bovine pericardium. Our results demonstrated that AES treatment achieved a higher pericardial antigen removal rate than traditional detergent treatments while preserving the mechanical properties and biocompatibility of the biomaterials. Moreover, we observed excellent immune tolerance in the in vivo rat model. Overall, our findings suggest that AES treatment is a promising method for preparing biological valves with ideal clinical application prospects.

Biological Scaffolds for Congenital Heart Disease

Congenital heart disease (CHD) is the most predominant birth defect and can require several invasive surgeries throughout childhood. The absence of materials with growth and remodelling potential is a limitation of currently used prosthetics in cardiovascular surgery, as well as their susceptibility to calcification. The field of tissue engineering has emerged as a regenerative medicine approach aiming to develop durable scaffolds possessing the ability to grow and remodel upon implantation into the defective hearts of babies and children with CHD. Though tissue engineering has produced several synthetic scaffolds, most of them failed to be successfully translated in this life-endangering clinical scenario, and currently, biological scaffolds are the most extensively used. This review aims to thoroughly summarise the existing biological scaffolds for the treatment of paediatric CHD, categorised as homografts and xenografts, and present the preclinical and clinical studies. Fixation as well as techniques of decellularisation will be reported, highlighting the importance of these approaches for the successful implantation of biological scaffolds that avoid prosthetic rejection. Additionally, cardiac scaffolds for paediatric CHD can be implanted as acellular prostheses, or recellularised before implantation, and cellularisation techniques will be extensively discussed.

The impact of matrix age on intervertebral disc regeneration

With the lack of effective treatments for low back pain, the use of extracellular matrix (ECM)-based biomaterials have emerged with undeniable promise for IVD regeneration. Decellularized scaffolds can recreate an ideal microenvironment inducing tissue remodeling and repair. In particular, fetal tissues have a superior regenerative capacity given their ECM composition. In line with this, we unraveled age-associated alterations of the nucleus pulposus (NP) matrisome. Thus, the aim of the present work was to evaluate the impact of ECM donor age on IVD de/regeneration. Accordingly, we optimized an SDS (0.1 %, 1 h)-based decellularization protocol that preserves ECM cues in bovine NPs from different ages. After repopulation with adult NP cells, younger matrices showed the highest repopulation efficiency. Most importantly, cells seeded on younger scaffolds produced healthy ECM proteins suggesting an increased capacity to restore a functional IVD microenvironment. In vivo, only fetal matrices decreased neovessel formation, showing an anti-angiogenic potential. Our findings demonstrate that ECM donor age has a strong influence on angiogenesis and ECM de novo synthesis, opening new avenues for novel therapeutic strategies for the IVD. Additionally, more appropriate 3D models to study age-associated IVD pathology were unveiled.

Chemical modification of acellular fish skin as a promising biological scaffold by carbodiimide cross‐linker for wound healing

Biological matrices can be modified with cross-linkers to improve some of their characteristics as scaffolds for tissue engineering. In this study, chemical cross-linker 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) was used with different ratios (5, 10, 20, 30, and 40 mM) to improve properties such as mechanical strength, denaturation temperature, and degradability of the acellular fish skin as a biological scaffold for tissue engineering applications. Morphological analysis showed that the use of cross-linker at low concentrations had no effect on the structure and textiles of the scaffold, while increasing mechanical strength, denaturation temperature, and degradation time. Cytotoxicity and cellular studies showed that the optimal cross-linker concentration did not significantly affect cell viability as well as cell adhesion. In general, utilising the carbodiimide cross-linker with the optimal ratio can improve the characteristics and function of the biological tissues such as acellular fish skin.

Perfusion decellularization for vascularized composite allotransplantation

Vascularized composite allotransplantation is becoming the emerging standard for reconstructive surgery treatment for patients with limb trauma and facial injuries involving soft tissue loss. Due to the complex immunogenicity of composite grafts, patients who undergo vascularized composite allotransplantation are reliant on lifelong immunosuppressive therapy. Decellularization of donor grafts to create an extracellular matrix bio-scaffold provides an immunomodulatory graft that preserves the structural and bioactive function of the extracellular matrix. Retention of extracellular matrix proteins, growth factors, and signaling cascades allow for cell adhesion, migration, proliferation, and tissue regeneration. Perfusion decellularization of detergents through the graft vasculature allows for increased regent access to all tissue layers, and removal of cellular debris through the venous system. Grafts can subsequently be repopulated with appropriate cells through the vasculature to facilitate tissue regeneration. The present work reviews methods of decellularization, process parameters, evaluation of adequate cellular and nuclear removal, successful applications of perfusion decellularization for use in vascularized composite allotransplantation, and current limitations.

Co-Graft of Acellular Dermal Matrix and Split Thickness Skin Graft—A New Reconstructive Surgical Method in the Treatment of Hidradenitis Suppurativa

Hidradenitis suppurativa is a chronic disease that significantly reduces patients’ quality of life. Patients are chronically treated with systemic therapies, which are often ineffective. Surgical treatment for severe cases of hidradenitis suppurativa is one option for affected patients. Surgical treatment has its limitations, and wound closure may be particularly problematic. This requires the use of reconstructive techniques. The methods of choice for wound closure are split-thickness skin grafts or local flaps reconstructions. However, each method has its limitations. This is a presentation of a new reconstructive surgical method in hidradenitis suppurativa surgery: the use of a co-graft of Acellular dermal matrix and split thickness skin graft as a novel method in wound closure after wide excisions, based on two cases. The results of this method are very promising: we achieved very fast wound closure with good aesthetic results regarding scar formation. In this paper, we used several examinations: laser speckle analysis, cutometer tests, and health-related quality of life (QoL) questionnaire to check the clinical impact of this method. Our initial results are very encouraging. ADM with STSG as a co-graft could be widely used in reconstructive surgery. This is a preliminary study, which should be continued in further, extended research.

Biomaterials and advanced technologies for the evaluation and treatment of ovarian aging

Ovarian aging is characterized by a progressive decline in ovarian function. With the increase in life expectancy worldwide, ovarian aging has gradually become a key health problem among women. Over the years, various strategies have been developed to preserve fertility in women, while there are currently no clinical treatments to delay ovarian aging. Recently, advances in biomaterials and technologies, such as three-dimensional (3D) printing and microfluidics for the encapsulation of follicles and nanoparticles as delivery systems for drugs, have shown potential to be translational strategies for ovarian aging. This review introduces the research progress on the mechanisms underlying ovarian aging, and summarizes the current state of biomaterials in the evaluation and treatment of ovarian aging, including safety, potential applications, future directions and difficulties in translation.

Engineered artificial articular cartilage made of decellularized extracellular matrix by mechanical and IGF-1 stimulation

Cartilage engineering has the potential to overcome clinical deficiency in joint disorders. Decellularized extracellular matrix (dECM) has great biocompatibility and bioactivity and can be considered an appropriate natural scaffold for tissue engineering applications. Both insulin-like growth factor-1 (IGF-1) and mechanical compression stimulate the production of cartilage ECM, modulate mechanical properties, and gene expression. The current investigation aimed to fabricate a high-quality moldable artificial cartilage by exposing the chondrocytes in biomimicry conditions using cartilage dECM, IGF-1, and mechanical stimulations. In this study, an ad hoc bioreactor was designed to apply dynamic mechanical stimuli (10 % strain, 1 Hz) on chondrocyte-laden cartilage dECM-constructs with/without IGF-1 supplementation for 2 weeks, 3 h/day. Our data revealed that mechanical stimulation had no adverse effect on cell viability and proliferation. However, it elevated the expression of chondrogenic markers such as collagen type II (COL2A1), aggrecan (ACAN), and proteoglycan-4 (PRG-4), and reduced the expression of matrix metalloproteinase-3 (MMP-3). Mechanical stimulation also promoted higher newly formed glycosaminoglycan (GAG) and produced more aligned fibers that can be responsible for higher Young's modulus of the engineered construct. Even though IGF-1 demonstrated some extent of improvement in developing neocartilage, it was not as effective as mechanical stimulation. Neither IGF-1 nor compression elevated the collagen type I expression. Compression and IGF-1 showed a synergistic impact on boosting the level of COL2A1 but not the other factors. In conclusion, mechanical stimulation on moldable cartilage dECM can be considered a good technique to fabricate artificial cartilage with higher functionality.

Application of Acellular Dermal Matrix in Gynaecology—A Current Review

The aim of our study is to draw attention to the multitude of applications of acellular dermal matrix (ADM) in the surgical treatment of urogynaecological disorders, such as reduction in the reproductive organs, and in reconstructive gynaecology. Despite the existence of numerous operational methods and materials, the effectiveness of transvaginal operation is still insufficient. Native tissue operations are often not durable enough, while operations with synthetic materials have numerous side effects, such as infections, hematomas, vaginal erosion, or dyspareunia. Hence, the search continues for a different material with a better efficacy and safety profile than those previously mentioned. It seems that ADM can meet these requirements and be a useful material for urogynaecological surgery. Key words related to the usage of ADM in gynaecological reconstructive surgery were used to search relevant databases (NCBI MedLine, Clinical Key, Clinicaltrials.gov). This manuscript is based on 43 literature sources, 28 (65.11%) of which were released after 2016. Older sources are cited for the purpose of presenting basic science, or other important issues related to the manuscript. ADM seems to be an ideal material for urogynaecological and reconstructive surgery. It has high durability, and thus high effectiveness. Moreover, it does not have the side effects typical for synthetic materials. There are no reports of material rejection, erosion or dyspareunia directly related to the presence of the mesh. Due to the difficulties in obtaining ADM and the need to perform additional tests, this material is not common in routine clinical practice. Therefore, the number of cases and the size of the research groups are insufficient to clearly define the potential of mesh from biological tissue. However, the results are so promising that it is worth considering a wider introduction to the use of this material. Our hope is that increasing clinicians’ awareness of this topic will lead to more studies comparing methods using native tissues or synthetic materials and those using ADM.

Insights into the use of genetically modified decellularized biomaterials for tissue engineering and regenerative medicine

Various modifications have been performed on biomaterials to improve their applications in tissue engineering and regenerative medicine. However, the challenges of immunogenicity and biocompatibility existed since the application of biomaterials. As a method to solve this problem, the decellularization process removes most living cells from biomaterials to minimize their immunogenicity; and preserves the native structures and compositions that favour cell growth and the subsequent construction of functional tissue. On the other hand, genetic modification of biomaterials aims to achieve specific functions (low immunogenicity, osteogenesis, etc.) or analyse the genetic mechanisms underlying some diseases (cardiac dysfunction, liver fibrosis, etc.). The combination of decellularization and gene modification is highly superior to biomaterials; thus, we must obtain a deeper understanding of these novel biomaterials. In this review, we summarize the fabrication approaches and current applications of genetically modified decellularized biomaterials and then discuss their disadvantages and corresponding future perspectives.

Research Progress on the Immunogenicity and Regeneration of Acellular Adipose Matrix: A Mini Review

Acellular adipose matrix (AAM) has received increasing attention for soft tissue reconstruction, due to its abundant source, high long-term retention rate and in vivo adipogenic induction ability. However, the current decellularization methods inevitably affect native extracellular matrix (ECM) properties, and the residual antigens can trigger adverse immune reactions after transplantation. The behavior of host inflammatory cells mainly decides the regeneration of AAM after transplantation. In this review, recent knowledge of inflammatory cells for acellular matrix regeneration will be discussed. These advancements will inform further development of AAM products with better properties.

Gelatin/sodium alginate hydrogel-coated decellularized porcine coronary artery to construct bilayer tissue engineered blood vessels

Cardiovascular diseases and vascular trauma can be commonly found in the population. Scholars worldwide hope to develop small-diameter vascular grafts that can replace autologous vessels for clinical use. Decellularized blood vessels can retain the original morphology, structure, and physical properties of blood vessels, which is conducive to cell growth, proliferation, and differentiation. In this study, porcine coronary arteries (PCAs) were decellularized to prepare decellularized porcine coronary artery (DPCA), and bilayer hybrid scaffolds were prepared by coating gelatin and sodium alginate mixed hydrogel of seven different proportions and combined with mouse fibroblasts (L929 cells) to study the construction of tissue engineering vessels in vitro. The obtained bilayer hybrid scaffolds were 3-7 cm in length, 5 mm in external diameter, and 1 mm in average wall thickness. All seven bilayer hybrid scaffolds showed good biocompatibility after cell inoculation. Compared with 2D culture, cells on 3D scaffolds grew relatively slowly in the first 4 days, and the number of cells proliferated rapidly at 7 days. In the same culture days, different concentrations of hydrogel also had an impact on cell proliferation. With the increase of hydrogel content, cells on the 3D scaffold formed cell colonies faster. The results showed that the scaffold had good biocompatibility and could meet the needs of artificial blood vessel construction.

A Comparative Study Between Porcine Peritoneum and Pericardium as Cardiovascular Material

Decellularized porcine pericardium has many applications in the cardiovascular field for its excellent properties. The peritoneum is a single-layer bio-dialysis membrane with many similarities and differences in physical characteristics, biochemical composition, and structure to the pericardium. The limited available literature suggests that, similar to the pericardium, the peritoneum has good application potential in the field of cardiovascular substitute materials. This research focused on comparing the differences between decellularized peritoneum and decellularized pericardium in microstructure, biochemical composition, mechanical properties, hemocompatibility, in vitro enzymatic degradation, in vitro calcification, cytocompatibility, and other vital indicators. The peritoneum was consistent with pericardium in terms of fibrous structure, hemocompatibility, in vitro calcification, and cytocompatibility. The peritoneal elastic fiber content (219 μg/mg) was significantly higher than that of the pericardium (66 μg/mg), resulting in two to three times higher maximum load (21.1 N) and burst pressure (1309 mmHg), and better performance than the pericardium in terms of in vitro resistance to enzymatic degradation. In the cardiovascular field, decellularized peritoneum can be used as vascular substitute material. Impact statement There are many similarities between the embryonic origin and morphological structure of the porcine peritoneum and the porcine pericardium, but little research has been done on the use of the porcine peritoneum as a biomaterial. In this compared research, we showed that porcine peritoneum had better resistance to enzymatic degradation, better stretching, and more suitable burst pressure for being used as vascular substitute material. This research is the first to describe the structural composition of porcine peritoneum and its advantageous properties as a cardiovascular material.

Decellularization in Tissue Engineering and Regenerative Medicine: Evaluation, Modification, and Application Methods

Reproduction of different tissues using scaffolds and materials is a major element in regenerative medicine. The regeneration of whole organs with decellularized extracellular matrix (dECM) has remained a goal despite the use of these materials for different purposes. Recently, decellularization techniques have been widely used in producing scaffolds that are appropriate for regenerating damaged organs and may be able to overcome the shortage of donor organs. Decellularized ECM offers several advantages over synthetic compounds, including the preserved natural microenvironment features. Different decellularization methods have been developed, each of which is appropriate for removing cells from specific tissues under certain conditions. A variety of methods have been advanced for evaluating the decellularization process in terms of cell removal efficiency, tissue ultrastructure preservation, toxicity, biocompatibility, biodegradability, and mechanical resistance in order to enhance the efficacy of decellularization methods. Modification techniques improve the characteristics of decellularized scaffolds, making them available for the regeneration of damaged tissues. Moreover, modification of scaffolds makes them appropriate options for drug delivery, disease modeling, and improving stem cells growth and proliferation. However, considering different challenges in the way of decellularization methods and application of decellularized scaffolds, this field is constantly developing and progressively moving forward. This review has outlined recent decellularization and sterilization strategies, evaluation tests for efficient decellularization, materials processing, application, and challenges and future outlooks of decellularization in regenerative medicine and tissue engineering.

Tissue engineering of human ear pinna

Auricular deformities (Microtia) can cause physical, social as well as psychological impacts on a patient's wellbeing. Biofabrication of a complex structure such as ear pinna is not precise with currently available techniques. These limitations can be overcome with the help of tissue engineering. In this article, the authors presented molding and three dimensional (3D) printing to generate a flexible, human size ear pinna. The decellularization of goat ear cartilage protocol and bioink alkaline digestion protocol was followed to yield complete removal of all cellular components without changing the properties of the Extra Cellular Matrix (ECM). Decellularized scaffold used in molding technology and 3D printing technology Computer-Aided Design /Stereolithography (CAD/STL) uses bioink to construct the patient-specific ear. In vivo biocompatibility of the both ear pinnae showed demonstrable recellularization. Histology and scanning electron microscopy analysis revealed the recellularization of cartilage-specific cells and the development of ECM in molded and 3D printed ear pinna after transplantation. Both the techniques provided ideal results for mechanical properties such as elasticity. Vascular Associated Protein expression revealed specific vasculogenic pattern (angiogenesis) in transplanted molded pinna. Chondrocyte specific progenitor cells express CD⁹⁰⁺ which highlighted newly developed chondrocytes in both the grafts which indicated that the xenograft was accepted by the rat. Transplantation of molded as well as 3D ear pinna was successful in an animal model and can be available for clinical treatments as a medical object to cure auricular deformities.

TGF-β1 and its signal molecules: are they correlated with the elasticity characteristics of breast lesions?

Background

Shear wave elastography can evaluate tissue stiffness. Previous studies showed that the elasticity characteristics of breast lesions were related to the components of extracellular matrix which was regulated by transforming growth factor beta 1(TGF-β1) directly or indirectly. However, the correlation of the expression level of TGF-β1, its signal molecules and elasticity characteristics of breast lesions have rarely been reported. The purpose of this study was to investigate the correlation between the expression level of TGF-β1, its signal molecules, and the elasticity characteristics of breast lesions.

Methods

135 breast lesions in 130 patients were included. Elasticity parameters, including elasticity modulus, the elasticity ratio, the “stiff rim sign”, were recorded before biopsy and surgical excision. The expression levels of TGF-β1 and its signal molecules, including Smad2/3, Erk1/2, p38 mitogen-activated protein kinase (MAPK), c-Jun N-terminal kinase 2 (JNK2), phosphoinositide 3-kinase (PI3K), and protein kinase B (PKB/AKT) were detected by immunohistochemistry. The diagnostic performance of the expression level of those molecules and their correlation with the elasticity characteristics were analyzed.

Results

Elasticity parameters and the expression levels of TGF- β1 and its signal molecules of benign lesions were lower than those of malignant lesions (P<0.0001). The expression levels of TGF- β1 and its signal molecules were correlated with elasticity parameters. The expression levels of TGF- β1 and its signal molecules in lesions with “stiff rim sign” were higher than those without “stiff rim sign” (P<0.05). And the expression levels of Smad2/3, Erk1/2, p38 MAPK, JNK2, PI3K and AKT were correlated with that of TGF- β1. The area under the curve for receiver operator characteristic curve of TGF-β1 and its signal molecules in the differentiation of malignant and benign breast lesions ranged from 0.920–0.960.

Conclusions

The expression levels of TGF-β1, its signal molecules of breast lesions showed good diagnostic performance and were correlated with the elasticity parameters. The expression levels of signal molecules were correlated with that of TGF- β1, which speculated that TGF- β1 might play an important role in the regulation of breast lesion elasticity parameters and multiple signal molecule expressions.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12885-021-09036-4.

3D-printed dermis-specific extracellular matrix mitigates scar contraction via inducing early angiogenesis and macrophage M2 polarization

Scar contraction frequently happens in patients with deep burn injuries. Hitherto, porcine dermal extracellular matrix (dECM) has supplied microenvironments that assist in wound healing but fail to inhibit scar contraction. To overcome this drawback, we integrate dECM into three-dimensional (3D)-printed dermal analogues (PDA) to prevent scar contraction. We have developed thermally gelled, non-rheologically modified dECM powder (dECMp) inks and successfully transformed them into PDA that was endowed with a micron-scale spatial structure. The optimal crosslinked PDA exhibited desired structure, good mechanical properties as well as excellent biocompatibility. Moreover, in vivo experiments demonstrated that PDA could significantly reduced scar contraction and improved cosmetic upshots of split thickness skin grafts (STSG) than the commercially available dermal templates and STSG along. The PDA has also induced an early, intense neovascularization, and evoked a type-2-like immune response. PDA's superior beneficial effects may attribute to their desired porous structure, the well-balanced physicochemical properties, and the preserved dermis-specific ECM cues, which collectively modulated the expression of genes such as Wnt11, ATF3, and IL1β, and influenced the crucial endogenous signalling pathways. The findings of this study suggest that PDA is a clinical translatable material that possess high potential in reducing scar contraction.

•

Current dermal analogues have supplied microenvironments that assist in wound healing but cannot inhibit scar contraction.

•

dECMp ink was formulated and transformed into PDA endowed with a micron-scale designed spatial structure.

•

The PDAs were neatly superior to split thickness skin grafts and commercial dermal templates in hindering scar contraction.

•

The transcriptome data may reveal how at the molecular level the IS and skin wounds respond to biomaterial stimuli.

Methoxy polyethylene glycol modification promotes adipogenesis by inducing the production of regulatory T cells in xenogeneic acellular adipose matrix

Acellular adipose matrix (AAM) has emerged as an important biomaterial for adipose tissue regeneration. Current decellularization methods damage the bioactive components of the extracellular matrix (ECM), and the residual immunogenic antigens may induce adverse immune responses. Here, we adopted a modified decellularization method which can protect more bioactive components with less immune reaction by methoxy polyethylene glycol (mPEG). Then, we determined the adipogenic mechanisms of mPEG-modified AAM after xenogeneic transplantation. AAM transplantation caused significantly lesser adipogenesis in the wild-type group than in the immune-deficient group. The mPEG-modified AAM showed significantly lower immunogenicity and higher adipogenesis than the AAM alone after xenogeneic transplantation. Furthermore, mPEG modification increased regulatory T (Treg) cell numbers in the AAM grafts, which in turn enhanced the M2/M1 macrophage ratio by secreting IL-10, IL-13, and TGF-β1. These findings suggest that mPEG modification effectively reduces the immunogenicity of xenogeneic AAM and promotes adipogenesis in the AAM grafts. Hence, mPEG-modified AAM can serve as an ideal biomaterial for xenogeneic adipose tissue engineering.

Effect of cryoprotectants on rat kidney decellularization by freeze-thaw process

To overcome the shortage of organ donors and morbidity and mortality caused by lifetime immunosuppression, development of a transplantable graft to permanently replace the organ function is required. This study is focused on the effects of a freeze-thaw process and cryoprotectants on the ultrastructure and composition of decellularization scaffolds. Results showed that cryoprotectants and freezing temperatures had significant effects on the decellularization scaffold. The vascular network integrity at -20 °C was better than that at -80 °C. For low-concentration cryoprotectants, 10% dimethyl sulfoxide and 5% trehalose could achieve a better balance between preserving the vascular tree and decellularization. For high-concentration cryoprotectants (vitrification solutions VS55 and VS83), the vascular network integrity was best because of the absence of freezing damage and ice-induced disruption of cells, but the decellularization effect was poor because the cells remained in the scaffold. Collagen, elastic fiber, protein, and mechanical properties of the scaffold could be retained after decellularization using the freeze-thaw method. Further studies and further optimization of the freeze-thaw decellularization protocol are necessary for clinical applications.

Fabrication of a multi-layered decellularized amniotic membranes as tissue engineering constructs

As a promising approach in tissue engineering, decellularization has become one of the mostly-studied research areas in tissue engineering thanks to its potential to bring about several advantages over synthetic materials since it can provide a 3-dimensional ECM structure with matching biomechanical properties of the target tissue. Amniotic membranes are the tissues that nurture the embryos during labor. Similarly, these materials have also been proposed for tissue regeneration in several applications. The main drawback in using amniotic membranes is the limited thickness of these materials since most tissues require a 3D matrix for an enhance regeneration. In order to prevent this limitation, here we report a facile fabrication methodology for multilayered amniotic membrane-based tissue constructs. The amniotic membranes of Wistar albino rats were first decellularized with the physical and chemical methods and utilized as scaffolds. Secondly, the prepared decellularized membranes were sutured to form a multilayered 3D structure. Within the study, 7 groups including control (PBS), were prepared based on physical and chemical decellularization methods. UV exposure and freezing techniques were used as a physical decellularization methods while hypertonic medium and SDS (sodium dodecyl sulfate) protocols were used as chemical decellularization methods. The combinations of both protocols were also used. In groups, A was the control and group B was applied just UV. In group C was applied UV and freezing. In addition to UV and freezing, in group D was applied hypertonic solution while group E was applied SDS (0.03 %). In group F was applied UV, freezing, hypertonic solution and SDS (0.03 %). In group G was applied UV, hypertonic solution, SDS (0.03 %) and freezing, respectively. Based on the histological and quantitative analyses, F and G groups were found as the most efficient decellularization protocols in rat amniotic membranes. Then, group F and G decellularized amniotic membranes were used to form scaffolds and thus-formed matrices were further characterized in vitro cell culture studies and mechanical tests. Cytotoxicity analyses performed using MTT showed a good cell viability in F and G groups scaffolds. The percentage viability rate was higher in G group (81.3 %) compared to F (75.33 %) and also cell viability in G group was found more meaningful according to p value which was obtained 0.007. Cellular adhesions after in vitro cell culture and morphology of scaffolds were evaluated by scanning electron microscopy (SEM). It was observed that the cells cultivated in equal amounts of tissue scaffolds were higher in the F compared to that observed in group G. The mechanical testing with 40 N force revealed 0.77 mm displacement in group F while it was 0.75 mm in group G. Moreover, according to force-controlled test, 2.9 mm displacement of F group and 1.2 mm displacement of G group was measured. As a result, this study shows that the multilayered decellularized amniotic membrane scaffolds support cell survival and adhesion and can form a flexible biomaterial with desired handling properties.

An Adipose-Derived Injectable Sustained-Release Collagen Scaffold of Adipokines Prepared Through a Fast Mechanical Processing Technique for Preventing Skin Photoaging in Mice

Ultraviolet A (UVA) radiation is the major contributor to skin photoaging, associated with increased collagen degradation and reactive oxygen species (ROS) expression. Adipokines have been proven as promising therapeutic agents for skin photoaging. However, adipokine therapy is generally limited by the short in vivo release duration and biological instability. Therefore, developing a treatment that provides a sustained release of adipokines and enhanced therapeutic effects is desirable. In this study, we developed a novel mechanical processing technique to extract adipose tissue-derived ECM components, named the “adipose collagen fragment” (ACF). The physical characterization, injectability, collagen components, residual DNA/RNA and adipokine release pattern of ACF were identified in vitro. L929 cells were treated with ACF or phosphate-buffered saline for 24 h after UVA irradiation in vitro. The expression of senescence-associated xβ-galactosidase (SA-β-gal), ROS and antioxidase were investigated. Then, we evaluated its therapeutic efficacy by injecting ACF and phosphate-buffered saline, as a control, into the dermis of photoaging nude mice and harvesting skin samples at weeks 1, 2, and 4 after treatment for assessment. The content of adipokines released from ACF was identified in vivo. The collagen synthesis and collagen degradation in ACF implants were evaluated by immune staining. Dermal thickness, fibroblast expression, collagen synthesis, ROS level, antioxidase expression, capillary density, and apoptotic cell number were evaluated by histological assessment, immune staining, and polymerase chain reaction in the skin samples. We demonstrated that ACF is the concentrated adipose extracellular matrix collagen fragment without viable cells and can be injected through fine needles. The lower expression of SA-β-gal, ROS and higher expression of antioxidase were observed in the ACF-treated group. ACF undergoes collagen degradation and promotes neocollagen synthesis in ACF implants. Meanwhile, ACF serves as a sustained-release system of adipokines and exhibits a significantly higher therapeutic effect on mouse skin photoaging by enhancing angiogenesis, antioxidant abilities, antiapoptotic activities, and collagen synthesis through sustainedly releasing adipokines. To sum up, ACF is an adipokines-enriched, sustained-release extracellular matrix collagen scaffold that can prevent UVA-induced skin photoaging in mice. ACF may serve as a novel autologous skin filler for skin rejuvenation applications in the clinic.

Tissue Engineering in Skin Substitute

Thermal injuries may cause significant damage to large areas of the skin. Extensive and deep burn wounds require specialized therapy. The optimal method in the strategy of treating extensive, full thickness burns (III°) is the use of autologous split thickness skin grafts STSG (Busuioc et al. Rom J Morphol Embryol 4:1061-1067, 2012; Kitala D, Kawecki M, Klama-Baryła A, Łabuś W, Kraut M, Glik J, Ryszkiel I, Kawecki MP, Nowak M. Allogeneic vs. Autologous Skin Grafts in the Therapy of Patients with Burn Injuries: A Restrospective, Open-label Clinical Study with Pair Matching. Adv Clin Exp Med. 2016 Sep-Oct;25(5):923-929.; Glik J, Kawecki M, Kitala D, Klama-Baryła A, Łabuś W, Grabowski M, Durdzińska A, Nowak M, Misiuga M, Kasperczyk A. A new option for definitive burn wound closure - pair matching type of retrospective case-control study of hand burns in the hospitalized patients group in the Dr Stanislaw Sakiel Center for Burn Treatment between 2009 and 2015. Int Wound J. 2017 Feb 21. https://doi.org/10.1111/iwj.12720 . [Epub ahead of print]; Prim et al. May 24Wound Repair Regen., 2017; Grossova et al. Mar 31Ann Burns Fire Disasters 30:5-8, 2017). The main limitation of that method is the inadequate amount of healthy, undamaged skin (donor sites), which could be harvested and used as a graft. Moreover, donor sites are an additional wounds that require analgesic therapy, leave scars during the healing process and they are highly susceptible to infection (1-6). It must be emphasized that in terms of the treatment of severe, deep and extensive burns, and there should be no doubt that the search for a biocompatible skin substitute that would be able to replace autologous STSG is an absolute priority. The above-mentioned necessitates the search for new treatment methods of severe burn wounds. Such methods could consider the preparation and application of bioengineered, natural skin substitutes. At present, as the clinical standard considered by the physicians may be use of available biological skin substitutes, e.g., human allogeneic skin, in vitro cultured skin cells, acellular dermal matrix ADM and revitalized ADMs, etc. (Busuioc et al. Rom J Morphol Embryol 4:1061-1067, 2012; Kitala D, Kawecki M, Klama-Baryła A, Łabuś W, Kraut M, Glik J, Ryszkiel I, Kawecki MP, Nowak M. Allogeneic vs. Autologous Skin Grafts in the Therapy of Patients with Burn Injuries: A Restrospective, Open-label Clinical Study with Pair Matching. Adv Clin Exp Med. 2016 Sep-Oct;25(5):923-929.; Glik J, Kawecki M, Kitala D, Klama-Baryła A, Łabuś W, Grabowski M, Durdzińska A, Nowak M, Misiuga M, Kasperczyk A. A new option for definitive burn wound closure - pair matching type of retrospective case-control study of hand burns in the hospitalised patients group in the Dr Stanislaw Sakiel Center for Burn Treatment between 2009 and 2015. Int Wound J. 2017 Feb 21. https://doi.org/10.1111/iwj.12720 . [Epub ahead of print]; Prim et al. May 24Wound Repair Regen., 2017; Grossova et al. Mar 31Ann Burns Fire Disasters 30:5-8, 2017; Łabuś et al. FebJ Biomed Mater Res B Appl Biomater 106:726-733, 2018).

Characteristics of a decellularized human ovarian tissue created by combined protocols and its interaction with human endometrial mesenchymal cells

The present study makes assessments by analyzing the efficacy of combined decellularization protocol for human ovarian fragments. Tissues were decellularized by freeze-thaw cycles, and treated with Triton X-100 and four concentrations (0.1, 0.5, 1 and 1.5%) of sodium dodecyl sulfate (SDS) at two exposure times. The morphology and DNA content of decellularized tissues were analyzed, and the group with better morphology and lower DNA content was selected for further assessments. The Acridine orange, Masson's trichrome, Alcian blue, and Periodic Acid-Schiff staining were used for extracellular matrix (ECM) evaluation. The amount of collagen types I and IV, glycosaminoglycans (GAGs), and elastin was quantified by Raman spectroscopy. The fine structure of the scaffold by scanning electron microscopy was studied. The endometrial mesenchymal cells were seeded onto decellularized scaffold by centrifugal method and cultured for 7 days. After 72 h the treated group with 0.5% SDS showed well-preserved ECM morphology with the minimum level of DNA (2.23% ± 0.08). Raman spectroscopy analysis confirmed that, the amount of ECM components was not significantly decreased in the decellularized group (P < 0.001) in comparison with native control. The electron micrographs demonstrated that the porosity and structure of ECM fibers in the decellularized group was similar to native ovary. The endometrial mesenchymal cells were attached and penetrated into the decellularized scaffold. In conclusion this combined protocol was an effective method to decellularize human ovarian tissue with high preservation of ECM contents, and human endometrial mesenchymal cells which successfully interacted with this created scaffold.

Influence of electron beam irradiation on extracellular matrix of the human allogeneic skin grafts

The nonviable allogeneic human skin grafts might be considered as the most suitable skin substitutes in the treatment of extensive and deep burns. However, in accordance to biological security such grafts require the final sterilization prior to clinical application. The aim of the study was to verify the influence of electron beam irradiation of three selected doses: 18, 25, and 35 kGy on the extracellular matrix of human skin. Prior to sterilization, the microbiological tests were conducted and revealed contamination in all examined cases. Individual groups were subjected to single electron beam radiation sterilization at proposed doses and then subjected to microbiological tests again. The results of microbiological testing performed for all irradiation doses used were negative. Only in the control group was a growth of microorganisms observed. The FTIR spectrometry tests were conducted followed by the histological evaluation and mechanical tests. In addition, cost analysis of radiation sterilization of individual doses was performed. The results of spectroscopic analysis, mechanical tests, and histological staining showed no significant changes in composition and characteristics of tested tissues after their irradiation, in comparison to control samples. The cost analysis has shown that irradiation with 18 kGy is the most cost-effective and 35 kGy is the least favorable. However, according to biological risk reduction, the recommended sterilization dose is 35 kGy, despite the higher price compared to the other doses tested.

The decellularized ovary as a potential scaffold for maturation of preantral ovarian follicles of prepubertal mice

ABBREVIATIONS

GAG: glycosaminoglycan; ECM: extracellular matrix; 2D: two-dimensional; E2: estradiol; P4: progesterone; BMP15: bone morphogenetic protein 15; GDF9: growth differentiation factor 9; ZP2: zona pellucida 2; Gdf9: growth/differentiation factor-9; Bmp6: bone morphogenetic protein 6; Bmp15: bone morphogenetic protein 15.

Application of bone and cartilage extracellular matrices in articular cartilage regeneration

Articular cartilage has an avascular structure with a poor ability for self-repair; therefore, many challenges arise in cases of trauma or disease. It is of utmost importance to identify the proper biomaterial for tissue repair that has the capability to direct cell recruitment, proliferation, differentiation, and tissue integration by imitating the natural microenvironment of cells and transmitting an orchestra of intracellular signals. Cartilage extracellular matrix (cECM) is a complex nanostructure composed of divergent proteins and glycosaminoglycans (GAGs), which regulate many functions of resident cells. Numerous studies have shown the remarkable capacity of ECM-derived biomaterials for tissue repair and regeneration. Moreover, given the importance of biodegradability, biocompatibility, 3D structure, porosity, and mechanical stability in the design of suitable scaffolds for cartilage tissue engineering, demineralized bone matrix (DBM) appears to be a promising biomaterial for this purpose, as it possesses the aforementioned characteristics inherently. To the best of the authors' knowledge, no comprehensive review study on the use of DBM in cartilage tissue engineering has previously been published. Since so much work is needed to address DBM limitations such as pore size, cell retention, and so on, we decided to draw the attention of researchers in this field by compiling a list of recent publications. This review discusses the implementation of composite scaffolds of natural or synthetic origin functionalized with cECM or DBM in cartilage tissue engineering. Cutting-edge advances and limitations are also discussed in an attempt to provide guidance to researchers and clinicians.

Fast protocol for the processing of split-thickness skin into decellularized human dermal matrix

BACKGROUND

Dermal scaffolds for tissue regeneration are nowadays an effective alternative in not only wound healing surgeries but also breast reconstruction, abdominal wall reconstruction and tendon reinforcement. The present study describes the development of a decellularization protocol applied to human split-thickness skin from cadaveric donors to obtain dermal matrix using an easy and quick procedure.

METHODS

Complete split-thickness donor was decellularized through the combination of hypertonic and enzymatic methods. To evaluate the absence of epidermis and dermal cells, and ensure the integrity of the extracellular matrix (ECM) structure, histological analysis was performed. Residual genetic content and ECM biomolecules (collagen, elastin, and glycosaminoglycan) were quantified and tensile strength was tested to measure the effect of the decellularization technique on the mechanical properties of the tissue.

RESULTS

Biomolecules quantification, residual genetic content (below 50 ng/mg dry tissue) and histological structure assessment showed the efficacy of the decellularization process and the preservation of the ECM. The biomechanical tests confirmed the preservation of native properties in the acellular tissue.

CONCLUSIONS

The acellular dermal matrix obtained from whole split-thickness skin donor with the newly developed decellualrization protocol, maintains the desired biomechanical and structural properties and represents a viable treatment option for patients.

Solubilized Cartilage ECM Facilitates the Recruitment and Chondrogenesis of Endogenous BMSCs in Collagen Scaffolds for Enhancing Microfracture Treatment

Articular cartilage has very poor intrinsic healing ability and its repair remains a significant clinical challenge. To promote neocartilage regeneration, we fabricated two collagen (Col) scaffolds functionalized with a porcine decellularized extracellular matrix (dECM) in the forms of particle and solution named pE-Col and sE-Col, respectively. Their differences were systematically compared, including the biochemical compositions, scaffold properties, cell-material interactions, and in situ cartilage regeneration. While it is demonstrated that both forms of dECM could enhance the cell recruitment, proliferation, and chondrogenesis of bone marrow stem cells (BMSCs) in vitro, better performance was seen in the sE-Col group, which could quickly provide a more favorable chondrogenic microenvironment for endogenous BMSCs. The superiority of sE-Col was also proved by our in vivo study, which showed that the sE-Col scaffold achieved better structural hyaline-like neocartilage formation and subchondral bone repair compared to the pE-Col scaffold, according to the gross morphology, biological assessment, and micro-CT imaging analysis. Together, this study suggests that the sE-Col scaffold holds great potential in developing the one-step microfracture-based strategy for cartilage repair and also reminds us that despite dECM being a promising biomaterial in tissue engineering, the optimization of the proper processing methodology would be a crucial consideration in the future design of dECM-based scaffolds in articular cartilage regeneration.

Sonication-Assisted Method for Decellularization of Human Umbilical Artery for Small-Caliber Vascular Tissue Engineering

Decellularized vascular grafts are useful for the construction of biological small-diameter tissue-engineered vascular grafts (≤6 mm). Traditional chemical decellularization requires a long treatment time, which may damage the structure and alter the mechanical properties. Decellularization using sonication is expected to solve this problem. The aim of this study was to develop an effective decellularization method using ultrasound followed by washing. Different power values of sonication at 40 kHz were tested for 2, 4, and 8 h followed by a washing procedure. The efficacy of sonication of decellularized human umbilical artery (sDHUA) was evaluated via DNA content, histological staining, mechanical properties, and biocompatibility. The sDHUAs were further implanted into rats for up to 90 days and magnetic resonance angiography (MRA) was performed for the implanted grafts. The results demonstrated that treatment of human umbilical artery (HUA) by sonication at ultrasonic power of 204 W for 4 h followed by washing for 24 h in 2% SDS buffer could eliminate more than 90% of cells and retain similar mechanical properties of the HUA. Recellularization was assessed by scanning electron microscopy (SEM), which indicated that sDHUA provided niches for human umbilical vein endothelial cells (HUVECs) to reside, indicating in vitro cytocompatibility. Further implantation tests also indicated the fitness of the sonication-treated HUA as a scaffold for small-caliber tissue engineering vascular grafts.

Cell-free scaffolds functionalized with bionic cartilage acellular matrix microspheres to enhance the microfracture treatment of articular cartilage defects

Microfracture surgery remains the most popular treatment for articular cartilage lesions in the clinic, but often leads to the formation of inferior fibrocartilage tissue and damage to subchondral bone. To overcome these problems, extracellular matrix (ECM) scaffolds derived from decellularized natural cartilaginous tissues were introduced and showed excellent biological properties to direct the differentiation of bone marrow stem cells. However, besides the limited allogenic/allogenic supply and the risk of disease transfer from xenogeneic tissues, the effectiveness of ECM scaffolds always varied with a high variability of natural tissue quality. In this study, we developed composite scaffolds functionalized with a cell-derived ECM source, namely, bionic cartilage acellular matrix microspheres (BCAMMs), that support the chondrogenic differentiation of bone marrow cells released from microfracture. The scaffolds with BCAMMs at different developmental stages were investigated in articular cartilage regeneration and subchondral bone repair. Compared to microfracture, the addition of cell-free BCAMM scaffolds has demonstrated a great improvement of regenerated cartilage tissue quality in a rabbit model as characterized by a semi-quantitative analysis of cells, histology and biochemical assays as well as micro-CT images. Moreover, the variation in ECM properties was found to significantly affect the cartilage regeneration, highlighting the challenges of homogenous scaffolds in working with microfracture. Together, our results demonstrate that the biofunctionalized BCAMM scaffold with cell-derived ECM shows great potential to combine with microfracture for clinical translation to repair cartilage defects.

Decellularized xenogenic cartilage extracellular matrix (ECM) scaffolds for the reconstruction of osteochondral defects in rabbits

The use of decellularized native allogenic or xenogenic cartilaginous extracellular matrix (ECM) biomaterials is widely expanding in the fields of tissue engineering and regenerative medicine. In this study, we aimed to develop an acellular, affordable, biodegradable, easily available goat conchal cartilaginous ECM derived scaffolding biomaterial for repair and regeneration of osteochondral defects in rabbits. Cartilages harvested from freshly collected goat ears were decellularized using chemical agents, namely, hypotonic-hypertonic (HH) buffer and Triton X-100 solution, separately. The morphologies and ultrastructure orientations of the decellularized cartilages remained unaltered in spite of complete cellular loss. Furthermore, when the acellular cartilaginous ECMs were cultured with murine mesenchymal stem cells (MSCs) (C3H10T1/2 cells), cellular infiltration and proliferation were thoroughly monitored using SEM, DAPI and FDA stained images, whereas the MTT assay proved the biocompatibility of the matrices. The increasing amounts of secreted ECM proteins (collagen and sGAG) indicated successful chondrogenic differentiation of the MSCs in the presence of the treated cartilage samples. In vivo biocompatibility studies showed no significant immune response or tissue rejection in the treated samples but tissue necrosis in control samples after 3 months. Upon implantation of the constructs in rabbits' osteochondral defects for 3 months, the histological and micro-CT evaluation revealed significant enhancement and regeneration of neocartilage and subchondral bony tissues. The IGF-1 loaded cartilaginous constructs showed comparatively better healing response after 3 months. Our results showed that decellularized xenogenic cartilaginous biomaterials preserved the bioactivity and integrity of the matrices that also favored in vitro stem cell proliferation and chondrogenic differentiation and enabled osteochondral regeneration, thus paving a new way for articular cartilage reconstruction.

The Renal Extracellular Matrix as a Supportive Scaffold for Kidney Tissue Engineering: Progress and Future Considerations

During the past decades, diverse methods have been used toward renal tissue engineering in order to replace renal function. The goals of all these techniques included the recapitulation of renal filtration, re-absorptive, and secretary functions, and replacement of endocrine/metabolic activities. It is also imperative to develop a reliable, up scalable, and timely manufacturing process. Decellularization of the kidney with intact ECM is crucial for in-vivo compatibility and targeted clinical application. Contemporarily there is an increasing interest and research in the field of regenerative medicine including stem cell therapy and tissue bioengineering in search for new and reproducible sources of kidneys. In this chapter, we sought to determine the most effective method of renal decellularization and recellularization with emphasis on biologic composition and support of stem cell growth. Current barriers and limitations of bioengineered strategies will be also discussed, and strategies to overcome these are suggested.

The useful agent to have an ideal biological scaffold

Tissue engineering which is applied in regenerative medicine has three basic components: cells, scaffolds and growth factors. This multidisciplinary field can regulate cell behaviors in different conditions using scaffolds and growth factors. Scaffolds perform this regulation with their structural, mechanical, functional and bioinductive properties and growth factors by attaching to and activating their receptors in cells. There are various types of biological extracellular matrix (ECM) and polymeric scaffolds in tissue engineering. Recently, many researchers have turned to using biological ECM rather than polymeric scaffolds because of its safety and growth factors. Therefore, selection the right scaffold with the best properties tailored to clinical use is an ideal way to regulate cell behaviors in order to repair or improve damaged tissue functions in regenerative medicine. In this review we first divided properties of biological scaffold into intrinsic and extrinsic elements and then explain the components of each element. Finally, the types of scaffold storage methods and their advantages and disadvantages are examined.

Re-endothelialization of non-detergent decellularized porcine vessels

Tissue engineering utilizes an interdisciplinary approach to generate constructs for the treatment and repair of diseased organs. Generation of small vessels as vascular grafts or as envisioned central vessel for vascularized constructs is still a challenge. Here, the decellularization of porcine vessels by a non-detergent based protocol was developed and investigated. Perfusion-decellularization with sodium hydroxide solution resulted in removal of cellular material throughout the whole length of the vessel while preserving structural and mechanical integrity. A re-endothelialization of the retrieved matrix with human umbilical vein endothelial cells and cardiac endothelial cells was achieved through rotation-based seeding employing a custom-made bioreactor. A confluent monolayer was detected on the entire luminal surface. Thus, a non-detergent-based decellularization method allowing the re-endothelialization of the luminal surface was developed in this study, thereby paving the way for future implementation of the resulting construct as vascular graft or as central vessel for tissue engineered constructs in need of a perfusion system with readily available anastomosis sites.

Aptamer-Functionalized Natural Protein-Based Polymers as Innovative Biomaterials

Biomaterials science is one of the most rapidly evolving fields in biomedicine. However, although novel biomaterials have achieved well-defined goals, such as the production of devices with improved biocompatibility and mechanical properties, their development could be more ambitious. Indeed, the integration of active targeting strategies has been shown to allow spatiotemporal control of cell-material interactions, thus leading to more specific and better-performing devices. This manuscript reviews recent advances that have led to enhanced biomaterials resulting from the use of natural structural macromolecules. In this regard, several structural macromolecules have been adapted or modified using biohybrid approaches for use in both regenerative medicine and therapeutic delivery. The integration of structural and functional features and aptamer targeting, although still incipient, has already shown its ability and wide-reaching potential. In this review, we discuss aptamer-functionalized hybrid protein-based or polymeric biomaterials derived from structural macromolecules, with a focus on bioresponsive/bioactive systems.

Angiogenic Potential in Biological Hydrogels

Hydrogels are three-dimensional (3D) materials able to absorb and retain water in large amounts while maintaining their structural stability. Due to their considerable biocompatibility and similarity with the body’s tissues, hydrogels are one of the most promising groups of biomaterials. The main application of these hydrogels is in regenerative medicine, in which they allow the formation of an environment suitable for cell differentiation and growth. Deriving from these hydrogels, it is, therefore, possible to obtain bioactive materials that can regenerate tissues. Because vessels guarantee the right amount of oxygen and nutrients but also assure the elimination of waste products, angiogenesis is one of the processes at the base of the regeneration of a tissue. On the other hand, it is a very complex mechanism and the parameters to consider are several. Indeed, the factors and the cells involved in this process are numerous and, for this reason, it has been a challenge to recreate a biomaterial able to adequately sustain the angiogenic process. However, in this review the focal point is the application of natural hydrogels in angiogenesis enhancing and their potential to guide this process.

Natural hydrogels R&D process: technical and regulatory aspects for industrial implementation

Since hydrogel therapies have been introduced into clinic treatment procedures, the biomedical industry has to face the technology transfer and the scale-up of the processes. This will be key in the roadmap of the new technology implementation. Transfer technology and scale-up are already known for some applications but other applications, such as 3D printing, are still challenging. Decellularized tissues offer a lot of advantages when compared to other natural gels, for example they display enhanced biological properties, due to their ability to preserve natural molecules. For this reason, even though their use as a source for bioinks represents a challenge for the scale-up process, it is very important to consider the advantages that originate with overcoming this challenge. Therefore, many aspects that influence the scaling of the industrial process should be considered, like the addition of drugs or cells to the hydrogel, also, the gelling process is important to determine the chemical and physical parameters that must be controlled in order to guarantee a successful process. Legal aspects are also crucial when carrying out the scale-up of the process since they determine the industrial implementation success from the regulatory point of view. In this context, the new law Regulation (EU) 2017/745 on biomedical devices will be considered. This review summarizes the different aspects, including the legal ones, that should be considered when scaling up hydrogels of natural origin, in order to balance these different aspects and to optimize the costs in terms of raw materials and engine.

Epithelial basement membrane of human decellularized cornea as a suitable substrate for differentiation of embryonic stem cells into corneal epithelial-like cells

The ability to decellularize and recellularize the corneas deemed unsuitable for transplantation may increase the number of available grafts. Decellularized corneas (DCs) may provide a natural microenvironment for cell adhesion and differentiation. Despite this, no study to date has evaluated their efficacy as a substrate for the induction of stem cell differentiation into corneal cells. The present study aimed to compare the efficiency of NaCl and NaCl plus nucleases methods to decellularize whole human corneas, and to investigate the effect of epithelial basement membrane (EBM) of whole DCs on the ability of human embryonic stem cells (hESCs) to differentiate into corneal epithelial-like cells when cultured in animal serum-free differentiation medium. As laminin is the major component of EBM, we also investigated its effect on hESCs differentiation. The decellularization efficiency and integrity of the extracellular matrix (ECM) obtained were investigated by histology, electron microscopy, DNA quantification, immunofluorescence, and nuclear staining. The ability of hESCs to differentiate into corneal epithelial-like cells when seeded on the EBM of DCs or laminin-coated wells was evaluated by immunofluorescence and RT-qPCR analyses. NaCl treatment alone, without nucleases, was insufficient to remove cellular components, while NaCl plus nucleases treatment resulted in efficient decellularization and preservation of the ECM. Unlike cells induced to differentiate on laminin, hESCs differentiated on DCs expressed high levels of corneal epithelial-specific markers, keratin 3 and keratin 12. It was demonstrated for the first time that the decellularized matrices had a positive effect on the differentiation of hESCs towards corneal epithelial-like cells. Such a strategy supports the potential applications of human DCs and hESCs in corneal epithelium tissue engineering.

Molecular and Biomechanical Clues From Cardiac Tissue Decellularized Extracellular Matrix Drive Stromal Cell Plasticity

Decellularized-organ-derived extracellular matrix (dECM) has been used for many years in tissue engineering and regenerative medicine. The manufacturing of hydrogels from dECM allows to make use of the pro-regenerative properties of the ECM and, simultaneously, to shape the material in any necessary way. The objective of the present project was to investigate differences between cardiovascular tissues (left ventricle, mitral valve, and aorta) with respect to generating dECM hydrogels and their interaction with cells in 2D and 3D. The left ventricle, mitral valve, and aorta of porcine hearts were decellularized using a series of detergent treatments (SDS, Triton-X 100 and deoxycholate). Mass spectrometry-based proteomics yielded the ECM proteins composition of the dECM. The dECM was digested with pepsin and resuspended in PBS (pH 7.4). Upon warming to 37°C, the suspension turns into a gel. Hydrogel stiffness was determined for samples with a dECM concentration of 20 mg/mL. Adipose tissue-derived stromal cells (ASC) and a combination of ASC with human pulmonary microvascular endothelial cells (HPMVEC) were cultured, respectively, on and in hydrogels to analyze cellular plasticity in 2D and vascular network formation in 3D. Differentiation of ASC was induced with 10 ng/mL of TGF-β1 and SM22α used as differentiation marker. 3D vascular network formation was evaluated with confocal microscopy after immunofluorescent staining of PECAM-1. In dECM, the most abundant protein was collagen VI for the left ventricle and mitral valve and elastin for the aorta. The stiffness of the hydrogel derived from the aorta (6,998 ± 895 Pa) was significantly higher than those derived from the left ventricle (3,384 ± 698 Pa) and the mitral valve (3,233 ± 323 Pa) (One-way ANOVA, p = 0.0008). Aorta-derived dECM hydrogel drove non-induced (without TGF-β1) differentiation, while hydrogels derived from the left ventricle and mitral valve inhibited TGF-β1-induced differentiation. All hydrogels supported vascular network formation within 7 days of culture, but ventricular dECM hydrogel demonstrated more robust vascular networks, with thicker and longer vascular structures. All the three main cardiovascular tissues, myocardium, valves, and large arteries, could be used to fabricate hydrogels from dECM, and these showed an origin-dependent influence on ASC differentiation and vascular network formation.

Decellularized Human Dermal Matrix as a Biological Scaffold for Cardiac Repair and Regeneration

The complex and highly organized environment in which cells reside consists primarily of the extracellular matrix (ECM) that delivers biological signals and physical stimuli to resident cells. In the native myocardium, the ECM contributes to both heart compliance and cardiomyocyte maturation and function. Thus, myocardium regeneration cannot be accomplished if cardiac ECM is not restored. We hypothesize that decellularized human skin might make an easily accessible and viable alternate biological scaffold for cardiac tissue engineering (CTE). To test our hypothesis, we decellularized specimens of both human skin and human myocardium and analyzed and compared their composition by histological methods and quantitative assays. Decellularized dermal matrix was then cut into 600-μm-thick sections and either tested by uniaxial tensile stretching to characterize its mechanical behavior or used as three-dimensional scaffold to assess its capability to support regeneration by resident cardiac progenitor cells (hCPCs) in vitro. Histological and quantitative analyses of the dermal matrix provided evidence of both effective decellularization with preserved tissue architecture and retention of ECM proteins and growth factors typical of cardiac matrix. Further, the elastic modulus of the dermal matrix resulted comparable with that reported in literature for the human myocardium and, when tested in vitro, dermal matrix resulted a comfortable and protective substrate promoting and supporting hCPC engraftment, survival and cardiomyogenic potential. Our study provides compelling evidence that dermal matrix holds promise as a fully autologous and cost-effective biological scaffold for CTE.

Characterization of a heparinized decellularized scaffold and its effects on mechanical and structural properties

Decellularization is a promising approach in tissue engineering to generate small-diameter blood vessels. However, some challenges still exist. We performed two decellularization phases to develop an optimal decellularized scaffold and analyze the relationship between the extracellular matrix (ECM) composition and mechanical properties. In decellularization phase I, we tested sodium dodecylsulfate (SDS), Triton X-100 (TX100) and trypsin at different concentrations and exposure times. In decellularization phase II, we systematically compared five combined decellularization protocols based on the results of phase I to identify the optimal method. These protocols tested cell removal, ECM preservation, mechanical properties, and residual cytotoxicity. We further immobilized heparin to optimal decellularized scaffolds and determined its anticoagulant activity and mechanical properties. The combined decellularization protocol comprising treatment with 0.5% SDS followed by 1% TX100 could completely remove the cellular contents and preserve the mechanical properties and ECM architecture better. In addition, the heparinized decellularized scaffolds not only had sustained anticoagulant activity, but also similar mechanical properties to native vessels. In conclusion, heparinized decellularized scaffolds represent a promising direction for small-diameter vascular grafts, although further in vivo studies are needed.