Evaluation of a bioengineered construct for tissue engineering applications

Current Strategies for Engineered Vascular Grafts and Vascularized Tissue Engineering

Blood vessels not only transport oxygen and nutrients to each organ, but also play an important role in the regulation of tissue regeneration. Impaired or occluded vessels can result in ischemia, tissue necrosis, or even life-threatening events. Bioengineered vascular grafts have become a promising alternative treatment for damaged or occlusive vessels. Large-scale tubular grafts, which can match arteries, arterioles, and venules, as well as meso- and microscale vasculature to alleviate ischemia or prevascularized engineered tissues, have been developed. In this review, materials and techniques for engineering tubular scaffolds and vasculature at all levels are discussed. Examples of vascularized tissue engineering in bone, peripheral nerves, and the heart are also provided. Finally, the current challenges are discussed and the perspectives on future developments in biofunctional engineered vessels are delineated.

Anti-calcification potential of collagen based biological patch crosslinked by epoxidized polysaccharide

Biological patch is a kind of tissue substitute material derived from natural polymer materials for the repair of human soft tissue defects. The serious calcification of biological patch after implantation is one of the reasons for the decline and failure of patch. In previous studies, we synthesized a new biomaterial crosslinker epoxidized chitosan quaternary ammonium salt (EHTCC) and used it for the crosslinking of porcine acellular dermal matrix (pADM). The prepared EHTCC-pADM had good mechanical properties, biocompatibility and healing promoting properties. In order to broaden its application scenarios, the related properties of EHTCC-pADM as implant patch were further explored in this study. The results of X-ray diffraction (XRD) measurements showed that the structure of pADM did not change much before and after the crosslinking of EHTCC, which was conducive to the maintenance of the excellent biological properties of pADM. According to the enzymatic degradation resistance test in vitro, the resistance of EHTCC-pADM to type I collagenase degradation was significantly improved compared with non -crosslinked pADM. And with the increase of the amount of EHTCC, its degradation resistance was stronger. The experimental results showed that EHTCC-pADM can well support the growth of L929 fibroblasts and has good anti-calcification properties in vitro and in vivo.

Vascular Tissue Engineering: Challenges and Requirements for an Ideal Large Scale Blood Vessel

Since the emergence of regenerative medicine and tissue engineering more than half a century ago, one obstacle has persisted: the in vitro creation of large-scale vascular tissue (>1 cm³) to meet the clinical needs of viable tissue grafts but also for biological research applications. Considerable advancements in biofabrication have been made since Weinberg and Bell, in 1986, created the first blood vessel from collagen, endothelial cells, smooth muscle cells and fibroblasts. The synergistic combination of advances in fabrication methods, availability of cell source, biomaterials formulation and vascular tissue development, promises new strategies for the creation of autologous blood vessels, recapitulating biological functions, structural functions, but also the mechanical functions of a native blood vessel. In this review, the main technological advancements in bio-fabrication are discussed with a particular highlights on 3D bioprinting technologies. The choice of the main biomaterials and cell sources, the use of dynamic maturation systems such as bioreactors and the associated clinical trials will be detailed. The remaining challenges in this complex engineering field will finally be discussed.

The effect of Scrophularia striata on cell attachment and biocompatibility of decellularized bovine pericardia

Since using tissue transplantation has faced limitations all over the world, regenerative medicine has introduced decellularized tissues as natural scaffolds and researchers are trying to improve their efficiency and function. In this study, to increase cell attachment and ultimately cell proliferation on decellularized bovine pericardia, scrophularia striata extract was used. Scrophularia striata is an Iranian traditional medicinal plant. For this aim after decellularization of bovine pericardium and analysis of its morphology, it was incubated in scrophularia striata solution. Next, isolated human adipose-derived mesenchymal stem cells were cultured on the tissue. Finally, MTT assay, nitric oxide assay, and scanning electron microscopy observation were performed. MTT showed an increase in cell survival after treating the tissue with the plant extract after 48 h in a dose dependent manner significantly. The survival of cells in 0.5%, 2.5%, and 5% groups was about 5, 10 and 15 folds higher in comparison to control groups, respectively. Additionally, nitric oxide secretion in 2.5% and 5% samples was three and five folds higher than that in control group, respectively. Moreover, SEM observation indicated an impressive and dose-dependent effect of using Scrophularia striata on tissue biocompatibility. The results of this study showed that using Scrophularia striata increased cell viability and cell attachment on decellularized pericardia which could pave the way for the use of natural extracts of medicinal plants to reduce unwanted effects and make desired changes in decellularized tissues.

Evaluation of an electrochemically aligned collagen yarn for textile scaffold fabrication

Collagen is the major component of the extracellular matrix in human tissues and widely used in the fabrication of tissue engineered scaffolds for medical applications. However, these forms of collagen gels and films have limitations due to their inferior strength and mechanical performance and their relatively fast rate of degradation. A new form of continuous collagen yarn has recently been developed for potential usage in fabricating textile tissue engineering scaffolds. In this study, we prepared the continuous electrochemical aligned collagen yarns from acid-soluble collagen that was extracted from rat tail tendons (RTTs) using 0.25 M acetic acid. Sodium dodecyl sulfate polyacrylamide gel electrophoresis and Fourier transform infrared spectroscopy confirmed that the major component of the extracted collagen contained alpha 1 and alpha 2 chains and the triple helix structure of Type 1 collagen. The collagen solution was processed to monofilament yarns in continuous lengths by using a rotating electrode electrochemical compaction device. Exposing the non-crosslinked collagen yarns and the collagen yarns crosslinked with 1-ethyl-3-(-3-dimethyl-aminopropyl) carbodiimide hydrochloride to normal physiological hydrolytic degradation conditions showed that both yarns were able to maintain their tensile strength during the first 6 weeks of the study. Cardiosphere-derived cells showed significantly enhanced attachment and proliferation on the collagen yarns compared to synthetic polylactic acid filaments. Moreover, the cells were fully spread and covered the surface of the collagen yarns, which confirmed the superiority of collagen in terms of promoting cellular adhesion. The results of this work indicated that the aligned RTT collagen yarns are favorable for fabricating biotextile scaffolds and are encouraging for further studies of various textile structure for different tissue engineering applications.

Evaluating the effects of vacuum on the microstructure and biocompatibility of bovine decellularized pericardium

The aim of this study was evaluating the effects of vacuum on microstructure and biocompatibility of bovine decellularized pericardium. So the bovine pericardia were decellularized and then the vacuum was applied for two periods of time; 90 and 180 min. DNA, glucose amino glycan, collagen and elastin content assay, scanning electron microscopy (SEM) examination, hematoxylin and eosin (H&E) and Masson's trichrome stainings performed to evaluate microstructure of tissues. MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) test, subcutaneous implantation, and tensile test were used to assay biocompatibility and mechanical properties of decellularized tissues. The results showed that applying vacuum reduced residual DNA significantly. Vacuum after 180 min reduced more residual DNA. There were no significant differences in the content of glucose amino glycan (GAG), collagen, and elastin between the vacuumed and control groups. SEM examination was revealed that vacuum for 180 min increased pore size and porosity more than 90 min and control groups. H&E and Masson's trichrome stainings revealed extracellular matrix preservation after decellularization in all groups. Cell viability was increased in vacuumed samples significantly after 72 h in vaccumed samples. H&E staining and tensile test after implantation of tissues were showed less inflammation in the vacuum applied tissues and increased durability. The vacuum increased DNA removal, pore size, porosity, and biocompatibility in vitro and in vivo and durability of bovine decellularized pericardium in vivo. Considering the important role of time, more studies should be performed to optimize time, intensity, and method of application of vacuum in decellularization of different tissues as well as bovine pericardium.

From arteries to capillaries: approaches to engineering human vasculature

From micro-scaled capillaries to millimeter-sized arteries and veins, human vasculature spans multiple scales and cell types. The convergence of bioengineering, materials science, and stem cell biology has enabled tissue engineers to recreate the structure and function of different hierarchical levels of the vascular tree. Engineering large-scale vessels has been pursued over the past thirty years to replace or bypass damaged arteries, arterioles, and venules, and their routine application in the clinic may become a reality in the near future. Strategies to engineer meso- and microvasculature have been extensively explored to generate models to study vascular biology, drug transport, and disease progression, as well as for vascularizing engineered tissues for regenerative medicine. However, bioengineering of large-scale tissues and whole organs for transplantation, have failed to result in clinical translation due to the lack of proper integrated vasculature for effective oxygen and nutrient delivery. The development of strategies to generate multi-scale vascular networks and their direct anastomosis to host vasculature would greatly benefit this formidable goal. In this review, we discuss design considerations and technologies for engineering millimeter-, meso-, and micro-scale vessels. We further provide examples of recent state-of-the-art strategies to engineer multi-scale vasculature. Finally, we identify key challenges limiting the translation of vascularized tissues and offer our perspective on future directions for exploration.

Preparation and performance evaluation of electrospun poly(3-hydroxybutyrate) composite scaffolds as a potential hard tissue engineering application

In the present study, poly(3-hydroxybutyrate)-based composite scaffolds were prepared with multi-walled carbon nanotubes and hydroxyapatite nanoparticles for hard tissue engineering applications by electrospinning. All the prepared scaffolds showed connective porous structure, which were suitable for cell proliferation and migration. The mechanical properties of the poly(3-hydroxybutyrate) scaffold were improved by 0.5% of carbon nanotube addition, whereas the addition of hydroxyapatite nanoparticles up to 10% had an insignificant effect in tensile strength. However, scanning electron microscopy and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay results suggested that the mesenchymal stem cells attachment and their metabolic activities on the surface of the poly(3-hydroxybutyrate) scaffolds with hydroxyapatite were enhanced compared to poly(3-hydroxybutyrate) scaffolds. In addition, after 6 weeks of in vivo biocompatibility results in a model of rat indicated better tissue reactions for the scaffolds that contained hydroxyapatite. Overall, poly(3-hydroxybutyrate) composite scaffolds with 10% hydroxyapatite and 0.5% carbon nanotube showed optimal performances for the potential scaffold for hard tissue engineering application.

Evaluation of vacuum washing in the removal of SDS from decellularized bovine pericardium: method and device description

Aims

The aim of this study was to present a new method for removing Sodium dodecyl sulfate (SDS) detergent from decellularized bovine pericardium using vacuum.

Materials and Methods

The cows' pericardia were collected and decellularized. The samples were incubated with SDS1% for 48 h at 40 °C. To perform vacuum washing (VW: negative pressure was used to wash and remove detergents), every decellularized tissue was cut in 75mm diameter and fixed via a stainless-steel ring with 60mm diameter in the center of filtration Buchner Funnel which was connected to glass filtration flask The system was connected to a vacuum pump by a hose, and a negative pressure of -100 mmHg was applied for 15 min. Then, the samples were shaken and washed at 40-rpm in 100 ml of distilled water for 45 min. This process was repeated for samples of each group (6 times for sample VW6h, 12 times for sample VW12h, and 24 times for sample VW24h). At the end of every cycle, the effluent was collected to take a sample for SDS measurement. The normal washing (NW) group containing distilled water (NWd) and PBS (Phosphate buffered saline) (NWp) were used to wash and remove detergents. SDS measurements, MTT Assay, histological and tensile test, to compare two methods were used.

Results

The highest SDS in the effluent was in groups VW12h and VW24h (P ≤ 0.001) and the lowest residual SDS in scaffold was in two groups of VW12h and VW24h (P ≤ 0.001). MTT assay showed that cell survival in the VW12h and VW24h groups was higher than other groups and there' was no significant difference between cell survival in the VW12h and VW24h groups. Histological study showed destruction of tissue in the VW24h group. The results of the tensile test were shown that the native group had the highest module and the lowest amount was the VW24h sample which was reported with P ≤ 0.001 significance for all groups.

Conclusion

VW12h can be used as an effective method for SDS removal from decellularized pericardium which morphologically demonstrated a good structure in ECM.

Vascular Tissue Engineering: Progress, Challenges, and Clinical Promise

Although the clinical demand for bioengineered blood vessels continues to rise, current options for vascular conduits remain limited. The synergistic combination of emerging advances in tissue fabrication and stem cell engineering promises new strategies for engineering autologous blood vessels that recapitulate not only the mechanical properties of native vessels but also their biological function. Here we explore recent bioengineering advances in creating functional blood macro and microvessels, particularly featuring stem cells as a seed source. We also highlight progress in integrating engineered vascular tissues with the host after implantation as well as the exciting pre-clinical and clinical applications of this technology.