Intracortical Bone Mechanics Are Related to Pore Morphology and Remodeling in Human Bone

Intracortical remodelling increases in highly loaded bone after exercise cessation

Resorption within cortices of long bones removes excess mass and damaged tissue and increases during periods of reduced mechanical loading. Returning to high-intensity exercise may place bones at risk of failure due to increased porosity caused by bone resorption. We used point-projection X-ray microscopy images of bone slices from highly loaded (metacarpal, tibia) and minimally loaded (rib) bones from 12 racehorses, 6 that died during a period of high-intensity exercise and 6 that had a period of intense exercise followed by at least 35 days of rest prior to death, and measured intracortical canal cross-sectional area (Ca.Ar) and number (N.Ca) to infer remodelling activity across sites and exercise groups. Large canals that are the consequence of bone resorption (Ca.Ar >0.04 mm2 ) were 1.4× to 18.7× greater in number and area in the third metacarpal bone from rested than exercised animals (p = 0.005-0.008), but were similar in number and area in ribs from rested and exercised animals (p = 0.575-0.688). An intermediate relationship was present in the tibia, and when large canals and smaller canals that result from partial bony infilling (Ca.Ar >0.002 mm2 ) were considered together. The mechanostat may override targeted remodelling during periods of high mechanical load by enhancing bone formation, reducing resorption and suppressing turnover. Both systems may work synergistically in rest periods to remove excess and damaged tissue.

Trabecular bone deterioration in a postmenopausal female suffering multiple spontaneous vertebral fractures due to a delayed denosumab injection - A post-treatment re-initiation bone biopsy-based case study

Background

Denosumab, is a potent anti-resorptive that, increases bone mineral density, and reduces fracture risk in osteoporotic patients. However, several case studies have reported multiple vertebral fractures in patients discontinuing denosumab.

Case presentation

This case report describes a 64-year-old female with postmenopausal osteoporosis treated with denosumab, who had her 11th injection delayed by 4 months. The patient suffered eight spontaneous vertebral fractures. After consent, an iliac crest bone biopsy was obtained following re-initiation of the denosumab treatment and analyzed by micro-computed tomography and histomorphometry.

Results

micro-computed tomography analysis revealed a low trabecular bone volume of 10 %, a low trabecular thickness of 97 μm, a low trabecular spacing of 546 μm, a high trabecular number of 1.8/mm, and a high structure model index of 2.2, suggesting trabecular thinning and loss of trabecular plates. Histomorphometric trabecular bone analysis revealed an eroded perimeter per bone perimeter of 33 % and an osteoid perimeter per bone perimeter of 62 %. Importantly, 88 % of the osteoid perimeter was immediately above an eroded-scalloped cement line with no sign of mineralization, and often with no clear bone-forming osteoblasts on the surface. Moreover, only 5 % of the bone perimeter was mineralizing, reflecting that only 8 % of the osteoid perimeter underwent mineralization, resulting in a mineralization lag time of 545 days. Taken together, this indicates limited bone formation and delayed mineralization.

Conclusion

We present a case report of multiple vertebral fractures after denosumab discontinuation with histomorphometric evidence that denosumab discontinuation leads to extensive trabecular bone resorption followed by a limited bone formation and delayed mineralization if the denosumab treatment is reinitiated. This highlights the importance of developing optimal discontinuation strategies for patients that are to discontinue treatment.

Prediction of osteoporotic degradation of tibia human bone at trabecular scale

A theoretical numerical model is proposed to predict patient dependent osteoporotic bone degradation. The model parameters are identified through a particle swarm optimization algorithm and based on individual patient high resolution peripherical quantitative computer tomography (HRpQCT) scan data. The degradation model is based on cellular activity initiated by the elastic strain energy developed in the bone microstructure through patient's body weight. The macro (organ scale) and meso (trabecular scale) scale analyses are carried out and predicted bone volume fraction and microstructure evolution are compared with in-vivo experimental bone degradation for four elderly women over a period of 10 years. A significant correlation (r > 0.9) is observed between the model predictions and in-vivo experiments in all cases with an average deviation error of 1.46%. The model can easily be extended to other patients and provide good predictions for different population categories such as ethnicity, gender, age, etc.

In vivo measurement of three-dimensional load exerted on dental implants: a literature review

Background

For biomechanical consideration of dental implants, an understanding of the three-dimensional (3D) load exerted on the implant is essential, but little information is available on the in vivo load, including the measuring devices.

Purpose

This review aimed to evaluate studies that used specific load-measuring devices that could be mounted on an implant to measure the functional load in vivo.

Materials and methods

An electronic search utilizing the internet research databases PubMed, Google Scholar, and Scopus was performed. The articles were chosen by two authors based on the inclusion and exclusion criteria.

Results

In all, 132 studies were selected from the database search, and 16 were selected from a manual search. Twenty-three studies were finally included in this review after a complete full-text evaluation. Eleven studies were related to the force measurements using the strain gauges, and 12 were related to the piezoelectric force transducer. The principles of the two types of devices were completely different, but the devices produced comparable outcomes. The dynamics of the load magnitude and direction on the implant during function were clarified, although the number of participants in each study was small.

Conclusions

The load exerted on the implant during function was precisely measured in vivo using specific measuring devices, such as strain gauges or piezoelectric force transducers. The in vivo load data enable us to determine the actual biomechanical status in more detail, which might be useful for optimization of the implant prosthetic design and development of related materials. Due to the limited data and difficulty of in vivo measurements, the development of a new, simpler force measurement device and method might be necessary.

Estimation of Thickness and Speed of Sound for Transverse Cortical Bone Imaging Using Phase Aberration Correction Methods: An In Silico and Ex Vivo Validation Study

Delay-and-sum (DAS) beamforming of backscattered echoes is used for conventional ultrasound imaging. Although DAS beamforming is well suited for imaging in soft tissues, refraction, scattering, and absorption, porous mineralized tissues cause phase aberrations of reflected echoes and subsequent image degradation. The recently developed refraction corrected multi-focus technique uses subsequent focusing of waves at variable depths, the tracking of travel times of waves reflected from outer and inner cortical bone interfaces, the estimation of the shift needed to focus from one interface to another to determine cortical thickness (Ct.Th), and the speed of sound propagating in a radial bone direction (Ct.ν11). The method was validated previously in silico and ex vivo on plate shaped samples. The aim of this study was to correct phase aberration caused by bone geometry (i.e., curvature and tilt with respect to the transducer array) and intracortical pores for the multi-focus approach. The phase aberration correction methods are based on time delay estimation via bone geometry differences to flat bone plates and via the autocorrelation and cross correlation of the reflected ultrasound waves from the endosteal bone interface. We evaluate the multi-focus approach by incorporating the phase aberration correction methods by numerical simulation and one experiment on a human tibia bone, and analyze the precision and accuracy of measuring Ct.Th and Ct.ν11. Site-matched reference values of the cortical thickness of the human tibia bone were obtained from high-resolution peripheral computed tomography. The phase aberration correction methods resulted in a more precise (coefficient of variation of 5.7%) and accurate (root mean square error of 6.3%) estimation of Ct.Th, and a more precise (9.8%) and accurate (3.4%) Ct.ν11 estimation, than without any phase aberration correction. The developed multi-focus method including phase aberration corrections provides local estimations of both cortical thickness and sound velocity and is proposed as a biomarker of cortical bone quality with high clinical potential for the prevention of osteoporotic fractures.

Trabecular bone porosity and pore size distribution in osteoporotic patients - A low field nuclear magnetic resonance and microcomputed tomography investigation

The study of bone morphology is of great importance as bone morphology is influenced by factors such as age and underlying comorbidities and is associated with bone mechanical properties and fracture risk. Standard diagnostic techniques used in bone disease, such as Dual-Energy X-ray absorptiometry and ultrasonography do not provide qualitative and quantitative morphological information. In recent years, techniques such as High Resolution Computed Tomography (HR-CT), micro- CT, Magnetic Resonance Imaging (MRI), and Low Field Nuclear Magnetic Resonance (LF-NMR) have been developed for the study of bone structure and porosity. Data obtained from these techniques have been used to construct models to predict bone mechanical properties thanks to finite element analysis. Cortical porosity has been extensively studied and successfully correlated with disease progression and mechanical properties. Trabecular porosity and pore size distribution, however, have increasingly been taken into consideration to obtain a comprehensive analysis of bone pathology and mechanic. Therefore, we have decided to evaluate the ability of micro- CT (chosen for its high spatial resolving power) and LF-NMR (chosen to analyze the behavior of water molecules within trabecular bone pores) to characterize the morphology of trabecular bone in osteoporosis. Trabecular bone samples from human femoral heads collected during hip replacement surgery were from osteoporosis (test group) and osteoarthritis (control group) patients. Our data show that both micro- CT and LF-NMR can detect qualitative changes in trabecular bone (i.e., transition from plate-like to rod-like morphology). Micro- CT failed to detect significant differences in trabecular bone morphology parameters between osteoporotic and osteoarthritic specimens, with the exception of Trabecular Number and Connectivity Density, which are markers of osteoporosis progression. In contrast, LF-NMR was able to detect significant differences in porosity and pore size of trabecular bone from osteoporotic versus osteoarthritic (control) samples. However, only the combination of these two techniques allowed the detection of structural morphometric changes (increase in the larger pore fraction and enlargement of the larger pores) in the trabecular bone of osteoporotic specimens compared to osteoarthritic ones. In conclusion, the combined use of LF-NMR and micro- CT provides a valuable tool for characterizing the morphology of trabecular bone and may offer the possibility for a new approach to the study and modeling of bone mechanics in the context of aging and disease.

Large-scale quantification of human osteocyte lacunar morphological biomarkers as assessed by ultra-high-resolution desktop micro-computed tomography

Ultra-high-resolution imaging of the osteocyte lacuno-canalicular network (LCN) three-dimensionally (3D) in a high-throughput fashion has greatly improved the morphological knowledge about the constituent structures - positioning them as potential biomarkers. Technologies such as serial focused ion beam/scanning electron microscopy (FIB/SEM) and confocal scanning laser microscopy (CLSM) can image in extremely high resolution, yet only capture a small number of lacunae. Synchrotron radiation computed tomography (SR-CT) can image with both high resolution and high throughput but has a limited availability. Desktop micro-computed tomography (micro-CT) provides an attractive balance: high-throughput imaging on the micron level without the restrictions of SR-CT availability. In this study, accuracy, reproducibility, and sensitivity of large-scale quantification of human osteocyte lacunar morphometries were assessed by ultra-high-resolution desktop micro-computed tomography. For this purpose, thirty-one transiliac human bone biopsies containing trabecular and cortical regions were imaged using ultra-high-resolution desktop micro-CT at a nominal isotropic voxel resolution of 1.2 µm. The resulting 3D images were segmented, component labeled, and the following morphometric parameters of 7.71 million lacunae were measured: Lacunar number (Lc.N), density (Lc.N/BV), porosity (Lc.TV/BV), volume (Lc.V), surface area (Lc.S), surface area to volume ratio (Lc.S/Lc.V), stretch (Lc.St), oblateness (Lc.Ob), sphericity (Lc.Sr), equancy (Lc.Eq), and angle (Lc.θ). Accuracy was quantified by comparing automated lacunar identification to manual identification. Mean true positive rate (TPR), false positive rate (FPR), and false negative rate (FNR) were 89.0%, 3.4%, and 11.0%, respectively. Regarding the reproducibility of lacunar morphometry from repeated measurements, precision errors were low (0.2-3.0%) and intraclass correlation coefficients were high (0.960-0.999). Significant differences between cortical and trabecular regions (p<0.001) existed for Lc.N/BV, Lc.TV/BV, local lacunar surface area (<Lc.S>), and local lacunar volume (<Lc.V>), all of which demonstrate the sensitivity of the method and are possible biomarker candidates. This study provides the foundation required for future large-scale morphometric studies using ultra-high-resolution desktop micro-CT and high-throughput analysis of millions of osteocyte lacunae in human bone samples.

Mechanical stimuli-mediated modulation of bone cell function-implications for bone remodeling and angiogenesis

Bone remodeling, expressed as bone formation and turnover, is a complex and dynamic process closely related to its form and function. Different events, such as development, aging, and function, play a critical role in bone remodeling and metabolism. The ability of the bone to adapt to new loads and forces has been well known and has proven useful in orthopedics and insightful for research in bone and cell biology. Mechanical stimulation is one of the most important drivers of bone metabolism. Interestingly, different types of forces will have specific consequences in bone remodeling, and their beneficial effects can be traced using different biomarkers. In this narrative review, we summarize the major mediators and events in bone remodeling, focusing on the effects of mechanical stimulation on bone metabolism, cell populations, and ultimately, bone health.

Re-thinking the bone remodeling cycle mechanism and the origin of bone loss

Proper bone remodeling necessarily requires that osteoblasts reconstruct the bone that osteoclasts have resorbed. However, the cellular events connecting resorption to reconstruction have remained poorly known. The consequence is a fragmentary understanding of the remodeling cycle where only the resorption and formation steps are taken into account. New tools have recently made possible to elucidate how resorption shifts to formation, thereby allowing to comprehend the remodeling cycle as a whole. This new knowledge is reviewed herein. It shows how teams of osteoclasts and osteoblast lineage cells are progressively established and how they are subjected therein to reciprocal interactions. Contrary to the common view, osteoclasts and osteoprogenitors are intermingled on the eroded surfaces. The analysis of the resorption and cell population dynamics shows that osteoprogenitor cell expansion and resorption proceed as an integrated mechanism; that a threshold cell density of osteoprogenitors on the eroded surface is mandatory for onset of bone formation; that the cell initiating osteoprogenitor cell expansion is the osteoclast; and that the osteoclast therefore triggers putative osteoprogenitor reservoirs positioned at proximity of the eroded bone surface (bone lining cells, canopy cells, pericytes). The interplay between magnitude of resorption and rate of cell expansion governs how soon bone reconstruction is initiated and may determine uncoupling and permanent bone loss if a threshold cell density is not reached. The clinical perspectives opened by these findings are discussed.

Advancements in composition and structural characterization of bone to inform mechanical outcomes and modelling

Advancements in imaging, computing, microscopy, chromatography, spectroscopy and biological manipulations of animal models, have allowed for a more thorough examination of the hierarchical structure and composition of the skeleton. The ability to map cellular and molecular changes to nano-scale chemical composition changes (mineral, collagen cross-links) and structural changes (porosity, lacuno-canalicular network) to whole bone mechanics is at the forefront of an exciting era of discovery. In addition, there is increasing ability to genetically mimic phenotypes of human disease in animal models to study these structural and compositional changes. Combined, these recent developments have increased the ability to understand perturbations at multiple length scales to better realize the structure-function relationship in bone and inform biomechanical models. The intent of this review is to describe the multiple scales at which bone can characterized, highlighting new techniques such that structural, compositional, and biological changes can be incorporated into biomechanical modeling.

Cortical thinning and accumulation of large cortical pores in the tibia reflect local structural deterioration of the femoral neck

INTRODUCTION

Cortical bone thinning and a rarefaction of the trabecular architecture represent possible causes of increased femoral neck (FN) fracture risk. Due to X-ray exposure limits, the bone microstructure is rarely measurable in the FN of subjects but can be assessed at the tibia. Here, we studied whether changes of the tibial cortical microstructure, which were previously reported to be associated with femur strength, are also associated with structural deteriorations of the femoral neck.

METHODS

The cortical and trabecular architectures in the FN of 19 humans were analyzed ex vivo on 3D microcomputed tomography images with 30.3 μm voxel size. Cortical thickness (Ct.Th_tibia), porosity (Ct.Po_tibia) and pore size distribution in the tibiae of the same subjects were measured using scanning acoustic microscopy (12 μm pixel size). Femur strength during sideways falls was simulated with homogenized voxel finite element models.

RESULTS

Femur strength was associated with the total (vBMD_tot; R² = 0.23, p < 0.01) and trabecular (vBMD_trab; R² = 0.26, p < 0.01) volumetric bone mineral density (vBMD), with the cortical thickness (Ct.Th_FN; R² = 0.29, p < 0.001) and with the trabecular bone volume fraction (Tb.BV/TV_FN; R² = 0.34, p < 0.001), separation (Tb.Sp_FN; R² = 0.25, p < 0.01) and number (Tb.N_FN; R² = 0.32, p < 0.001) of the femoral neck. Moreover, smaller Ct.Th_tibia was associated with smaller Ct.Th_FN (R² = 0.31, p < 0.05), lower Tb.BV/TV_FN (R² = 0.29, p < 0.05), higher Tb.Sp_FN (R² = 0.33, p < 0.05) and lower Tb.N_FN (R² = 0.42, p < 0.01). A higher prevalence of pores with diameter > 100 μm in tibial cortical bone (relCt.Po_100μm-tibia) indicated higher Tb.Sp_FN (R² = 0.36, p < 0.01) and lower Tb.N_FN (R² = 0.45, p < 0.01).

CONCLUSION

Bone resorption and structural decline of the femoral neck may be identified in vivo by measuring cortical bone thickness and large pores in the tibia.

Integrational Technologies for the Development of Three-Dimensional Scaffolds as Platforms in Cartilage Tissue Engineering

The prevalence of osteoarthritis is on the rise, and an effective treatment for cartilage defects is still being sought. Cartilage tissue in vivo encompasses complex structures and composition, both of which influence cells and many properties of the native cartilage. The extracellular matrix structure and components provides both morphological cues and the necessary signals to promote cell functions including metabolism, proliferation, and differentiation. In the present study, cryo-printing and electrospinning were combined to produce multizone scaffolds that consist of three distinctive zones. These scaffolds successfully mimic the collagen fiber orientation of the native cartilage. Moreover, in vitro analysis of chondrocyte-seeded scaffolds demonstrated the ability of multizone scaffolds to support long-term chondrocyte attachment and survival over a 5 week culture period. Moreover, multizone scaffolds were found to regulate the expression of key genes in comparison to the controls and allowed the detection of sulfated glycosaminoglycan. Evaluation of the compressive properties revealed that the multizone scaffolds possess more suitable mechanical properties, for the native cartilage, in comparison to the electrospun and phase-separated controls. Multizone scaffolds provide viable initial platforms that capture the complex structure and compressive properties of the native cartilage. They also maintain chondrocyte phenotype and function, highlighting their potential in cartilage tissue engineering applications.

Estimation of Thickness and Speed of Sound in Cortical Bone Using Multifocus Pulse-Echo Ultrasound

Most bone loss during the development of osteoporosis occurs in cortical bone at the peripheral skeleton. Decreased cortical thickness (Ct.Th) and the prevalence of large pores at the tibia are associated with reduced bone strength at the hip. Ct.Th and cortical sound velocity, i.e., a surrogate marker for changes of cortical porosity (Ct.Po), are key biomarkers for the identification of patients at high fracture risk. In this study, we have developed a method using a conventional ultrasound array transducer to determine thickness (Ct.Th) and the compressional sound velocity propagating in the radial bone direction (Ct. ν₁₁ ) using a refraction-corrected multifocus imaging approach. The method was validated in-silico on porous bone plate models using a 2-D finite-difference time-domain method and ex vivo on plate-shaped plastic reference materials and on plate-shaped cortical bovine tibia samples. Plane-wave pulse-echo measurements provided reference values to assess precision and accuracy of our method. In-silico results revealed the necessity to account for inclination-dependent transmission losses at the bone surface. Moreover, the dependence of Ct. ν₁₁ on both porosity and pore density was observed. Ct.Th and Ct. ν₁₁ obtained ex vivo showed a high correlation ) with reference values. The ex-vivo accuracy and precision for Ct. ν₁₁ were 29.9 m/s and 0.94%, respectively, and those for Ct.Th were 0.04 mm and 1.09%, respectively. In conclusion, this numerical and experimental study demonstrates an accurate and precise estimation of Ct.Th and Ct. ν₁₁ . The developed multifocus technique may have high clinical potential to improve fracture risk prediction using noninvasive and nonionizing conventional ultrasound technology with image guidance.

The generation of enlarged eroded pores upon existing intracortical canals is a major contributor to endocortical trabecularization

The gradual conversion of cortical bone into trabecular bone on the endocortical surface contributes substantially to thinning of the cortical bone. The purpose of the present study was to characterize the intracortical canals (3D) and pores (2D) in human fibular bone, to identify the intracortical remodeling events leading to this endocortical trabecularization. The analysis was conducted in fibular diaphyseal bone specimens obtained from 20 patients (6 women and 14 men, age range 41-75 years). μCT revealed that endosteal bone had a higher cortical porosity (p< 0.05) and canals with a larger diameter (p< 0.05) than periosteal bone, while the canal spacing and number were similar in the endosteal and periosteal half. Histological analysis showed that the endosteal half versus the periosteal half: (i) had a higher likelihood of being non-quiescent type 2 pores (i.e. remodeling of existing pores) than other pore types (OR = 1.6, p< 0.01); (ii) that the non-quiescent type 2 pores contributed to a higher porosity (p< 0.001); and that (iii) amongst these pores especially eroded type 2 pores contributed to the elevated cortical porosity (p< 0.001). In conclusion, we propose that endocortical trabecularization results from the accumulation of eroded cavities upon existing intracortical canals, favored by delayed initiation of bone formation.

Acoustic diffusion constant of cortical bone: Numerical simulation study of the effect of pore size and pore density on multiple scattering

While osteoporosis assessment has long focused on the characterization of trabecular bone, the cortical bone micro-structure also provides relevant information on bone strength. This numerical study takes advantage of ultrasound multiple scattering in cortical bone to investigate the effect of pore size and pore density on the acoustic diffusion constant. Finite-difference time-domain simulations were conducted in cortical microstructures that were derived from acoustic microscopy images of human proximal femur cross sections and modified by controlling the density (Ct.Po.Dn) ∈[5-25] pore/mm² and size (Ct.Po.Dm) ∈[30-100] μm of the pores. Gaussian pulses were transmitted through the medium and the backscattered signals were recorded to obtain the backscattered intensity. The incoherent contribution of the backscattered intensity was extracted to give access to the diffusion constant D. At 8 MHz, significant differences in the diffusion constant were observed in media with different porous micro-architectures. The diffusion constant was monotonously influenced by either pore diameter or pore density. An increase in pore size and pore density resulted in a decrease in the diffusion constant (D =285.9Ct.Po.Dm^-1.49, R²=0.989 , p=4.96×10^-5,RMSE=0.06; D=6.91Ct.Po.Dn^-1.01, R²=0.94, p=2.8×10^-3 , RMSE=0.09), suggesting the potential of the proposed technique for the characterization of the cortical microarchitecture.

The role of EGFR signaling in age-related osteoporosis in mouse cortical bone

So far, there has been no effective cure for osteoporotic cortical bone, the most significant change in long bone structure during aging and the main cause of bone fragility fractures, because its underlying molecular and cellular mechanisms remain largely unknown. We used 3- and 15-mo-old mice as well as 15-mo-old mice treated with vehicle and gefitinib to evaluate structural, cellular, and molecular changes in cortical bone. We found that the senescence of osteoprogenitors was increased, whereas the expression of phosphorylated epidermal growth factor receptor (EGFR) on the endosteal surface of cortical bone down-regulated in middle-aged 15-mo-old mice compared with young 3-mo-old mice. Further decreasing EGFR signaling by gefitinib treatment in middle-aged mice resulted in promoted senescence of osteoprogenitors and accelerated cortical bone degeneration. Moreover, inhibiting EGFR signaling suppressed the expression of enhancer of zeste homolog 2 (Ezh2), the repressor of cell senescence-inducer genes, through ERK1/2 pathway, thereby promoting senescence in osteoprogenitors. Down-regulated EGFR signaling plays a physiologically significant role during aging by reducing Ezh2 expression, leading to the senescence of osteoprogenitors and the decline in bone formation on the endosteal surface of cortical bone.-Liu, G., Xie, Y., Su, J., Qin, H., Wu, H., Li, K., Yu, B., Zhang, X. The role of EGFR signaling in age-related osteoporosis in mouse cortical bone.

Large cortical bone pores in the tibia are associated with proximal femur strength

Alterations of structure and density of cortical bone are associated with fragility fractures and can be assessed in vivo in humans at the tibia. Bone remodeling deficits in aging women have been recently linked to an increase in size of cortical pores. In this ex vivo study, we characterized the cortical microarchitecture of 19 tibiae from human donors (aged 69 to 94 years) to address, whether this can reflect impairments of the mechanical competence of the proximal femur, i.e., a major fracture site in osteoporosis. Scanning acoustic microscopy (12 μm pixel size) provided reference microstructural measurements at the left tibia, while the bone vBMD at this site was obtained using microcomputed tomography (microCT). The areal bone mineral density of both left and right femoral necks (aBMD_neck) was measured by dual‐energy X‐ray absorptiometry (DXA), while homogenized nonlinear finite element models based on high-resolution peripheral quantitative computed tomography provided hip stiffness and strength for one-legged standing and sideways falling loads. Hip strength was associated with aBMD_neck (r = 0.74 to 0.78), with tibial cortical thickness (r = 0.81) and with measurements of the tibial cross-sectional geometry (r = 0.48 to 0.73) of the same leg. Tibial vBMD was associated with hip strength only for standing loads (r = 0.59 to 0.65). Cortical porosity (Ct.Po) of the tibia was not associated with any of the femoral parameters. However, the proportion of Ct.Po attributable to large pores (diameter > 100 μm) was associated with hip strength in both standing (r = -0.61) and falling (r = 0.48) conditions. When added to aBMD_neck, the prevalence of large pores could explain up to 17% of the femur ultimate force. In conclusion, microstructural characteristics of the tibia reflect hip strength as well as femoral DXA, but it remains to be tested whether such properties can be measured in vivo.

Understanding age-induced cortical porosity in women: Is a negative BMU balance in quiescent osteons a major contributor?

Cortical bone is remodeled by intracortical basic multicellular units (BMUs), whose end result can be observed as quiescent osteons in histological sections. These osteons offer a unique opportunity to investigate the BMU balance between the magnitude of bone resorption and subsequent bone formation at the BMU level. Our main objective was to investigate whether the latter parameters change between defined categories of osteons and with age, and to which extend these changes contribute to age-induced cortical porosity. Cortices of iliac bone specimens from 35 women (aged 16-78 years) with a higher porosity with age were investigated. A total of 3084 quiescent osteons reflecting 75% of the intracortical pores were histological examined. The osteons diameter, pore diameter, wall thickness, prevalence and contribution to the porosity were highly variable, but unchanged with age. Next, the osteons were categorized according to whether they reflected the remodeling of existing canals (type 2Q osteons) or the generation of new canals (type 1Q osteons). Type 2Q osteons versus type 1Q osteons: (i) had more frequently a pore diameter > 75 μm (7.4 vs. 1.3%; p < 0.001); (ii) had a larger mean pore diameter (40 ± 10 vs. 25 ± 4 μm; p < 0.001), osteon diameter (120 ± 21 vs. 94 ± 21 μm; p < 0.001) and wall thickness (40 ± 10 vs. 35 ± 9; p < 0.05); (iii) had a larger contribution to the cortical porosity (29 ± 18 vs. 8 ± 8%; p < 0.001); (iv) were more prevalent (44 ± 10 vs. 31 ± 11%; p < 0.001); and (v) were more prevalent with age. Collectively, this study demonstrates that quiescent osteons with age more frequently result from remodeling of existing canals, which in some cases had a more negative BMU balance. Still, the osteons showed no overall age-related change in their pore diameter i.e. BMU balance. In contrast to conventional wisdom, these data show that non-quiescent pores, not pores of quiescent osteons, were the main contributor to a higher cortical porosity.