Role of vascular endothelial growth factor in the communication between human osteoprogenitors and endothelial cells

Cascaded controlled delivering growth factors to build vascularized and osteogenic microenvironment for bone regeneration

The process of bone regeneration is intricately regulated by various cytokines at distinct stages. The establishment of early and efficient vascularization, along with the maintenance of a sustained osteoinductive microenvironment, plays a crucial role in the successful utilization of bone repair materials. This study aimed to develop a composite hydrogel that would facilitate the creation of an osteogenic microenvironment for bone repair. This was achieved by incorporating an early rapid release of VEGF and a sustained slow release of BMP-2. Herein, the Schiff base was formed between VEGF and the composite hydrogel, and VEGF could be rapidly released to promote vascularization in response to the early acidic bone injury microenvironment. Furthermore, the encapsulation of BMP-2 within mesoporous silica nanoparticles enabled a controlled and sustained release, thereby facilitating the process of bone repair. Our developed composite hydrogel released more than 80% of VEGF and BMP-2 in the acidic medium, which was significantly higher than that in the neutral medium (about 60%). Moreover, the composite hydrogel demonstrated a significant improvement in the migratory capacity and tube formation ability of human umbilical vein endothelial cells (HUVECs). Furthermore, the composite hydrogel exhibited an augmented ability for osteogenesis, as confirmed by the utilization of ALP staining, alizarin red staining, and the upregulation of osteogenesis-related genes. Notably, the composite hydrogel displayed substantial osteoinductive properties, compared with other groups, the skull defect in the composite hydrogels combined with BMP-2 and VEGF was full of new bone, basically completely repaired, and the BV/TV value was greater than 80%. The outcomes of animal experiments demonstrated that the composite hydrogel effectively promoted bone regeneration in cranial defects of rats by leveraging the synergistic effect of an early rapid release of VEGF and a sustained slow release of BMP-2, thereby facilitating vascularized bone regeneration. In conclusion, our composite hydrogel has demonstrated promising potential for vascularized bone repair through the enhancement of angiogenesis and osteogenic microenvironment.

Oxygen-Generating Biomaterials for Translational Bone Regenerative Engineering

Successful regeneration of critical-size defects remains one of the significant challenges in regenerative engineering. These large-scale bone defects are difficult to regenerate and are often reconstructed with matrices that do not provide adequate oxygen levels to stem cells involved in the regeneration process. Hypoxia-induced necrosis predominantly occurs in the center of large matrices since the host tissue's local vasculature fails to provide sufficient nutrients and oxygen. Indeed, utilizing oxygen-generating materials can overcome the central hypoxic region, induce tissue in-growth, and increase the quality of life for patients with extensive tissue damage. This article reviews recent advances in oxygen-generating biomaterials for translational bone regenerative engineering. We discussed different oxygen-releasing and delivery methods, fabrication methods for oxygen-releasing matrices, biology, oxygen's role in bone regeneration, and emerging new oxygen delivery methods that could potentially be used for bone regenerative engineering.

Standardized and axially vascularized calcium phosphate-based implants for segmental mandibular defects: A promising proof of concept

The reconstruction of massive segmental mandibular bone defects (SMDs) remains challenging even today; the current gold standard in human clinics being vascularized bone transplantation (VBT). As alternative to this onerous approach, bone tissue engineering strategies have been widely investigated. However, they displayed limited clinical success, particularly in failing to address the essential problem of quick vascularization of the implant. Although routinely used in clinics, the insertion of intrinsic vascularization in bioengineered constructs for the rapid formation of a feeding angiosome remains uncommon. In a clinically relevant model (sheep), a custom calcium phosphate-based bioceramic soaked with autologous bone marrow and perfused by an arteriovenous loop was tested to regenerate a massive SMD and was compared to VBT (clinical standard). Animals did not support well the VBT treatment, and the study was aborted 2 weeks after surgery due to ethical and animal welfare considerations. SMD regeneration was successful with the custom vascularized bone construct. Implants were well osseointegrated and vascularized after only 3 months of implantation and totally entrapped in lamellar bone after 12 months; a healthy yellow bone marrow filled the remaining space. STATEMENT OF SIGNIFICANCE: Regenerative medicine struggles with the generation of large functional bone volume. Among them segmental mandibular defects are particularly challenging to restore. The standard of care, based on bone free flaps, still displays ethical and technical drawbacks (e.g., donor site morbidity). Modern engineering technologies (e.g., 3D printing, digital chain) were combined to relevant surgical techniques to provide a pre-clinical proof of concept, investigating for the benefits of such a strategy in bone-related regenerative field. Results proved that a synthetic-biologics-free approach is able to regenerate a critical size segmental mandibular defect of 15 cm³ in a relevant preclinical model, mimicking real life scenarii of segmental mandibular defect, with a full physiological regeneration of the defect after 12 months.

Cross-Talk Between Mesenchymal Stromal Cells (MSCs) and Endothelial Progenitor Cells (EPCs) in Bone Regeneration

Bone regeneration is a complex, well-orchestrated process based on the interactions between osteogenesis and angiogenesis, observed in both physiological and pathological situations. However, specific conditions (e.g., bone regeneration in large quantity, immunocompromised regenerative process) require additional support. Tissue engineering offers novel strategies. Bone regeneration requires a cell source, a matrix, growth factors and mechanical stimulation. Regenerative cells, endowed with proliferation and differentiation capacities, aim to recover, maintain, and improve bone functions. Vascularization is mandatory for bone formation, skeletal development, and different osseointegration processes. The latter delivers nutrients, growth factors, oxygen, minerals, etc. The development of mesenchymal stromal cells (MSCs) and endothelial progenitor cells (EPCs) cocultures has shown synergy between the two cell populations. The phenomena of osteogenesis and angiogenesis are intimately intertwined. Thus, cells of the endothelial line indirectly foster osteogenesis, and conversely, MSCs promote angiogenesis through different interaction mechanisms. In addition, various studies have highlighted the importance of the microenvironment via the release of extracellular vesicles (EVs). These EVs stimulate bone regeneration and angiogenesis. In this review, we describe (1) the phenomenon of bone regeneration by different sources of MSCs. We assess (2) the input of EPCs in coculture in bone regeneration and describe their contribution to the osteogenic potential of MSCs. We discuss (3) the interaction mechanisms between MSCs and EPCs in the context of osteogenesis: direct or indirect contact, production of growth factors, and the importance of the microenvironment via the release of EVs.

3D bioprinting of prevascularised implants for the repair of critically-sized bone defects

For 3D bioprinted tissues to be scaled-up to clinically relevant sizes, effective prevascularisation strategies are required to provide the necessary nutrients for normal metabolism and to remove associated waste by-products. The aim of this study was to develop a bioprinting strategy to engineer prevascularised tissues in vitro and to investigate the capacity of such constructs to enhance the vascularisation and regeneration of large bone defects in vivo. From a screen of different bioinks, a fibrin-based hydrogel was found to best support human umbilical vein endothelial cell (HUVEC) sprouting and the establishment of a microvessel network. When this bioink was combined with HUVECs and supporting human bone marrow stem/stromal cells (hBMSCs), these microvessel networks persisted in vitro. Furthermore, only bioprinted tissues containing both HUVECs and hBMSCs, that were first allowed to mature in vitro, supported robust blood vessel development in vivo. To assess the therapeutic utility of this bioprinting strategy, these bioinks were used to prevascularise 3D printed polycaprolactone (PCL) scaffolds, which were subsequently implanted into critically-sized femoral bone defects in rats. Micro-computed tomography (µCT) angiography revealed increased levels of vascularisation in vivo, which correlated with higher levels of new bone formation. Such prevascularised constructs could be used to enhance the vascularisation of a range of large tissue defects, forming the basis of multiple new bioprinted therapeutics. STATEMENT OF SIGNIFICANCE: This paper demonstrates a versatile 3D bioprinting technique to improve the vascularisation of tissue engineered constructs and further demonstrates how this method can be incorporated into a bone tissue engineering strategy to improve vascularisation in a rat femoral defect model.

3D-Bioprinting Strategies Based on In Situ Bone-Healing Mechanism for Vascularized Bone Tissue Engineering

Over the past decades, a number of bone tissue engineering (BTE) approaches have been developed to address substantial challenges in the management of critical size bone defects. Although the majority of BTE strategies developed in the laboratory have been limited due to lack of clinical relevance in translation, primary prerequisites for the construction of vascularized functional bone grafts have gained confidence owing to the accumulated knowledge of the osteogenic, osteoinductive, and osteoconductive properties of mesenchymal stem cells and bone-relevant biomaterials that reflect bone-healing mechanisms. In this review, we summarize the current knowledge of bone-healing mechanisms focusing on the details that should be embodied in the development of vascularized BTE, and discuss promising strategies based on 3D-bioprinting technologies that efficiently coalesce the abovementioned main features in bone-healing systems, which comprehensively interact during the bone regeneration processes.

Renal Capsule Transplantation to Assay Angiogenesis in Skeletal Development and Repair

Renal capsule transplantation is a very helpful method to grow embryonic tissues or tumors in a vascular environment, allowing for long-term engraftment and biological analyses. This chapter describes the surgical procedure for the transplantation of embryonic skeletal elements in the renal capsule of adult mice and points out the manipulations that can be applied for assaying the role of angiogenesis during bone development and repair.

Aspiration-assisted bioprinting of co-cultured osteogenic spheroids for bone tissue engineering

Conventional top-down approaches in tissue engineering involving cell seeding on scaffolds have been widely used in bone engineering applications. However, scaffold-based bone tissue constructs have had limited clinical translation due to constrains in supporting scaffolds, minimal flexibility in tuning scaffold degradation, and low achievable cell seeding density as compared with native bone tissue. Here, we demonstrate a pragmatic and scalable bottom-up method, inspired from embryonic developmental biology, to build three-dimensional (3D) scaffold-free constructs using spheroids as building blocks. Human umbilical vein endothelial cells (HUVECs) were introduced to human mesenchymal stem cells (hMSCs) (hMSC/HUVEC) and spheroids were fabricated by an aggregate culture system. Bone tissue was generated by induction of osteogenic differentiation in hMSC/HUVEC spheroids for 10 days, with enhanced osteogenic differentiation and cell viability in the core of the spheroids compared to hMSC-only spheroids. Aspiration-assisted bioprinting (AAB) is a new bioprinting technique which allows precise positioning of spheroids (11% with respect to the spheroid diameter) by employing aspiration to lift individual spheroids and bioprint them onto a hydrogel. AAB facilitated bioprinting of scaffold-free bone tissue constructs using the pre-differentiated hMSC/HUVEC spheroids. These constructs demonstrated negligible changes in their shape for two days after bioprinting owing to the reduced proliferative potential of differentiated stem cells. Bioprinted bone tissues showed interconnectivity with actin-filament formation and high expression of osteogenic and endothelial-specific gene factors. This study thus presents a viable approach for 3D bioprinting of complex-shaped geometries using spheroids as building blocks, which can be used for various applications including but not limited to, tissue engineering, organ-on-a-chip and microfluidic devices, drug screening and, disease modeling.

The co-culture of ASCs and EPCs promotes vascularized bone regeneration in critical-sized bone defects of cranial bone in rats

Background

The repair of critical-sized bone defect represents a challenging problem in bone tissue engineering. To address the most important problem in bone defect repair, namely insufficient blood supply, this study aimed to find a method that can promote the formation of vascularized bone tissue.

Method

The phenotypes of ASCs and EPCs were identified respectively, and ASCs/EPCs were co-cultured in vitro to detect the expression of osteogenic and angiogenic genes. Furthermore, the co-culture system combined with scaffold material was used to repair the critical-sized bone defects of the cranial bone in rats.

Results

The co-culture of ASCs/EPCs could increase osteogenesis and angiogenesis-related gene expression in vitro. The results of in vivo animal experiments demonstrated that the ASC/EPC group could promote bone regeneration and vascularization in the meantime and then significantly accelerate the repair of critical-sized bone defects.

Conclusion

It is feasible to replace traditional single seed cells with ASC/EPC co-culture system for vascularized bone regeneration. This system could ultimately enable clinicians to better repair the defect of craniofacial bone and avoid donor site morbidity.

Cyclic tensile forces enhance the angiogenic properties of HUVECs by promoting the activities of human periodontal ligament cells

BACKGROUND

This study aimed to investigate whether human periodontal ligament (PDL) cells secrete pro-angiogenic factors that induce the vascularization of surrounding bone tissue under tensile stress.

METHODS

Quantitative real-time PCR and Western blotting were used to analyze the mRNA and protein expression levels of vascular endothelial growth factor (VEGF), basic fibroblast growth factor (bFGF), Angiopoietin-I (Ang-I), connective tissue growth factor （CTGF）, and macrophage colony-stimulating factor (M-CSF) in PDL cells after tensile force treatments of different durations. Enzyme-linked immunosorbent assay was used to measure the VEGF concentration in the supernatants of cell cultures. Cell viability assay, wound healing assay, and tube formation assay were performed to evaluate the angiogenic behaviors of human umbilical vein endothelial cells (HUVECs).

RESULTS

The mRNA expression and protein expression of VEGF, bFGF, Ang-I, and M-CSF was increased in the cells that received 6 to 48 hours of tensile force treatment. And, the VEGF level in the supernatant significantly increased in the human PDL cell cultures stressed for 6 to 48 hours. The abilities of HUVECs to proliferate, migrate, and form tubes were enhanced in media conditioned with tensile-stressed human PDL cells. Hence, tensile force induced human PDL cells to express and release pro-angiogenic factors enhancing the proliferation, migration, and angiogenic capacity of HUVECs.

CONCLUSION

Tensile stress induced human PDL cells to express and release pro-angiogenic factors, including VEGF, bFGF, Ang-I, and M-CSF, thereby enhancing the proliferation, migration, and angiogenic capacity of HUVECs.

Sulfated chitosan coated polylactide membrane enhanced osteogenic and vascularization differentiation in MC3T3-E1s and HUVECs co-cultures system

This study aimed to compare the effects of the two type chitosan derivatives, sulfated chitosan (SCS) and phosphorylated chitosan (PCS), coated on poly(d,l-lactide) (PDLLA) membrane via polydopamine, respectively, on vascularization and osteogenesis in vitro. Mouse preosteoblast cells (MC3T3-E1s) and human umbilical vein endothelial cells (HUVECs) were used as co-cultures system. The effects of two type membranes on calcium deposition, alkaline phosphatase (ALP) activity, vascularization related factors nitric oxide (NO) and angiogenic growth factor vascular endothelial growth factor (VEGF) were assessed. The changes of osteogenic and angiogenic related gene, and protein expression were evaluated too. In fact, SCS modified PDLLA membrane had the highest related gene and protein expression than other PDLLA membranes. Our results demonstrated that the SCS maybe a promising matrix for bone regeneration by co-cultures of ECs and OCs than PCS.

Advanced gelatin-based vascularization bioinks for extrusion-based bioprinting of vascularized bone equivalents

Bone tissue is highly vascularized. The crosstalk of vascular and osteogenic cells is not only responsible for the formation of the strongly divergent tissue types but also for their physiological maintenance and repair. Extrusion-based bioprinting presents a promising fabrication method for bone replacement. It allows for the production of large-volume constructs, which can be tailored to individual tissue defect geometries. In this study, we used the all-gelatin-based toolbox of methacryl-modified gelatin (GM), non-modified gelatin (G) and acetylated GM (GMA) to tailor both the properties of the bioink towards improved printability, and the properties of the crosslinked hydrogel towards enhanced support of vascular network formation by simple blending. The vasculogenic behavior of human dermal microvascular endothelial cells (HDMECs) and human adipose-derived stem cells (ASCs) was evaluated in the different hydrogel formulations for 14 days. Co-culture constructs including a vascular component and an osteogenic component (i.e. a bone bioink based on GM, hydroxyapatite and ASCs) were fabricated via extrusion-based bioprinting. Bioprinted co-culture constructs exhibited functional tissue-specific cells whose interplay positively affected the formation and maintenance of vascular-like structures. The setup further enabled the deposition of bone matrix associated proteins like collagen type I, fibronectin and alkaline phosphatase within the 30-day culture.

Dual-Functionalized Apatite Nanocomposites with Enhanced Cytocompatibility and Osteogenesis for Periodontal Bone Regeneration

The development of biomimetic bone graft materials for periodontal tissue engineering is a field of topical interest. In this study, we designed a dual-functionalized apatite nanocomposite, which could integrate multiple molecular cues for manipulating the fate of periodontal ligament stem cells (PDLSCs). Briefly, inspired by mussels, a biomimetic nanohydroxyapatite was fabricated using a polydopamine structure as a template (named as tHA) and then surface-modified with bone-forming peptide-1 (BFP-1) and vascular endothelial growth factor-mimicking peptide (QK) via a single step of catechol chemistry. Our study showed that the biofunctions of tethered peptides were not compromised on the surface of apatite nanoparticles. Because of the synergistic effect of BFP-1 and QK peptides, the dual-functionalized apatite nanocomposite showed improved cytocompatibility compared to controls. Moreover, it can boost the proliferation and osteogenic differentiation of PDLSCs, indicating excellent bioactivity of tHA-BFP/QK nanoparticles on cell fate decision. More importantly, animal experiments showed that dual-functionalized apatite nanocomposites could dramatically promote the regeneration of periodontal bone. It is concluded that our work provides an instructive insight into the design of biomimetic apatite nanocomposites, which holds a great potential for applications in periodontal bone repair.

Key components of engineering vascularized 3-dimensional bioprinted bone constructs

Vascularization has a pivotal role in engineering successful tissue constructs. However, it remains a major hurdle of bone tissue engineering, especially in clinical applications for the treatment of large bone defects. Development of vascularized and clinically-relevant engineered bone substitutes with sufficient blood supply capable of maintaining implant viability and supporting subsequent host tissue integration remains a major challenge. Since only cells that are 100-200 µm from blood vessels can receive oxygen through diffusion, engineered constructs that are thicker than 400 µm face a challenging oxygenation problem. Following implantation in vivo, spontaneous ingrowth of capillaries in thick engineered constructs is too slow. Thus, it is critical to provide optimal conditions to support vascularization in engineered bone constructs. To achieve this, an in-depth understanding of the mechanisms of angiogenesis and bone development is required. In addition, it is also important to mimic the physiological milieu of native bone to fabricate more successful vascularized bone constructs. Numerous applications of engineered vascularization with cell-and/or microfabrication-based approaches seek to meet these aims. Three-dimensional (3D) printing promises to create patient-specific bone constructs in the future. In this review, we discuss the major components of fabricating vascularized 3D bioprinted bone constructs, analyze their related challenges, and highlight promising future trends.

KLF2+ stemness maintains human mesenchymal stem cells in bone regeneration

Mesenchymal stem cells (MSCs), which are undifferentiated stem cells with the property of stemness and the potential to differentiate into multiple lineages, including osteoblasts, have attracted a great deal of attention in bone tissue engineering. Consistent with the heterogeneity of MSCs, various surface markers have been used. However, it is still unclear which markers of MSCs are best for cell amplification in vitro and later bone regeneration in vivo. Krüppel-like Factor 2 (KLF2) is an important indicator of the stemness of human MSCs (hMSCs) and as early vascularization is also critical for bone regeneration, we used KLF2 as a novel in vitro marker for MSCs and investigated the angiogenesis and osteogenesis between KLF2⁺ MSCs and endothelial cells (ECs). We found a synergistic interaction between hMSCs and human umbilical vein ECs (HUVECs) in that KLF2⁺ stemness-maintained hMSCs initially promoted the angiogenesis of HUVECs, which in turn more efficiently stimulated the osteogenesis of hMSCs. In fact, KLF2⁺ hMSCs secreted angiogenic factors initially, with some of the cells then differentiating into pericytes through the PDGF-BB/PDGFR-β signaling pathway, which improved blood vessel formation. The matured HUVECs in turn synergistically enhanced the osteogenesis of KLF2⁺ hMSCs through upregulated vascular endothelial growth factor. A three-dimensional coculture model using cell-laden gelatin methacrylate (GelMA) hydrogel further confirmed these results. This study provides insight into the stemness-directed synergistic interaction between hMSCs and HUVECs, and our results will have a profound impact on further strategies involving the application of KLF2⁺ hMSC/HUVEC-laden GelMA hydrogel in vascular network bioengineering and bone regeneration.

Inhibiting expression of Cxcl9 promotes angiogenesis in MSCs-HUVECs co-culture

The insufficient vascularization is a major challenge in bone tissue engineering, leading to partial necrosis of the implant. Pre-vascularization is a promising way via in vitro cells co-culture strategies using osteogenic cells and vasculogenic cells, and the cross-talk of cells is essential. In the present study, the effect of rat bone-marrow derived mesenchymal stem cells (BMSCs) on angiogenic capability of human umbilical vein endothelial cells (HUVECs) in growth medium (GM) and osteogenic induction medium (OIM) was investigated. It was demonstrated that cells co-cultured in OIM showed high efficiency in osteogenesis but failed to form capillary-like structure while the results of co-culture in GM were the opposite. By comparing the angiogenic capacity of co-cultures under GM and OIM, chemokine (C-X-C motif) ligand 9 (Cxcl9), secreted by BMSCs in OIM, was identified to be an angiostatic factor to counter-regulate vascular endothelial growth factor (VEGF) and prevent its binding to HUVECs, which abrogated angiogenesis of MSCs-ECs co-culture. Moreover, Cxcl9 was proved to suppress the osteogenic differentiation of BMSCs monoculture. The molecular mechanism of Cxcl9 activation in BMSCs involved mTOR/STAT1 signaling pathway. Therefore, blocking this signaling pathway via rapamycin addition resulted in the inhibition of Cxcl9 and improvement of osteogenic differentiation and angiogenic capacity of co-culture in OIM. These results reveal that Cxcl9 is a negative modulator of angiogenesis and osteogenesis, and its inhibition could promote pre-vascularization of bone tissue engineering.

Cultured cell-derived extracellular matrices to enhance the osteogenic differentiation and angiogenic properties of human mesenchymal stem/stromal cells

Cell-derived extracellular matrix (ECM) consists of a complex assembly of fibrillary proteins, matrix macromolecules, and associated growth factors that mimic the composition and organization of native ECM micro-environment. Therefore, cultured cell-derived ECM has been used as a scaffold for tissue engineering settings to create a biomimetic micro-environment, providing physical, chemical, and mechanical cues to cells, and support cell adhesion, proliferation, migration, and differentiation. Here, we present a new strategy to produce different combinations of decellularized cultured cell-derived ECM (dECM) obtained from different cultured cell types, namely, mesenchymal stem/stromal cells (MSCs) and human umbilical vein endothelial cells (HUVECs), as well as the coculture of MSC:HUVEC and investigate the effects of its various compositions on cell metabolic activity, osteogenic differentiation, and angiogenic properties of human bone marrow (BM)-derived MSCs, vital features for adult bone tissue regeneration and repair. Our findings demonstrate that dECM presented higher cell metabolic activity compared with tissue culture polystyrene. More importantly, we show that MSC:HUVEC ECM enhanced the osteogenic and angiogenic potential of BM MSCs, as assessed by in vitro assays. Interestingly, MSC:HUVEC (1:3) ECM demonstrated the best angiogenic response of MSCs in the conditions tested. To the best of our knowledge, this is the first study that demonstrates that dECM derived from a coculture of MSC:HUVEC impacts the osteogenic and angiogenic capabilities of BM MSCs, suggesting the potential use of MSC:HUVEC ECM as a therapeutic product to improve clinical outcomes in bone regeneration.

Bioprinting of Vascularized Tissue Scaffolds: Influence of Biopolymer, Cells, Growth Factors, and Gene Delivery

Over the past decades, tissue regeneration with scaffolds has achieved significant progress that would eventually be able to solve the worldwide crisis of tissue and organ regeneration. While the recent advancement in additive manufacturing technique has facilitated the biofabrication of scaffolds mimicking the host tissue, thick tissue regeneration remains challenging to date due to the growing complexity of interconnected, stable, and functional vascular network within the scaffold. Since the biological performance of scaffolds affects the blood vessel regeneration process, perfect selection and manipulation of biological factors (i.e., biopolymers, cells, growth factors, and gene delivery) are required to grow capillary and macro blood vessels. Therefore, in this study, a brief review has been presented regarding the recent progress in vasculature formation using single, dual, or multiple biological factors. Besides, a number of ways have been presented to incorporate these factors into scaffolds. The merits and shortcomings associated with the application of each factor have been highlighted, and future research direction has been suggested.

Micropatterning of endothelial cells to create a capillary-like network with defined architecture by laser-assisted bioprinting

Development of a microvasculature into tissue-engineered bone substitutes represents a current challenge. Seeding of endothelial cells in an appropriate environment can give rise to a capillary-like network to enhance prevascularization of bone substitutes. Advances in biofabrication techniques, such as bioprinting, could allow to precisely define a pattern of endothelial cells onto a biomaterial suitable for in vivo applications. The aim of this study was to produce a microvascular network following a defined pattern and preserve it while preparing the surface to print another layer of endothelial cells. We first optimise the bioink cell concentration and laser printing parameters and then develop a method to allow endothelial cells to survive between two collagen layers. Laser-assisted bioprinting (LAB) was used to pattern lines of tdTomato-labeled endothelial cells cocultured with mesenchymal stem cells seeded onto a collagen hydrogel. Formation of capillary-like structures was dependent on a sufficient local density of endothelial cells. Overlay of the pattern with collagen I hydrogel containing vascular endothelial growth factor (VEGF) allowed capillary-like structures formation and preservation of the printed pattern over time. Results indicate that laser-assisted bioprinting is a valuable technique to pre-organize endothelial cells into high cell density pattern in order to create a vascular network with defined architecture in tissue-engineered constructs based on collagen hydrogel.

Biodegradable Anisotropic Microparticles for Stepwise Cell Adhesion and Preparation of Janus Cell Microparticles

The biomimetic anisotropic particles have different physicochemical properties on the opposite two sides, enabling diverse applications in emulsion, photonic display, and diagnosis. However, the traditional anisotropic particles have a very small size, ranging from submicrons to a few microns. The design and fabrication of anisotropic macron-sized particles with new structures and properties is still challenging. In this study, anisotropic polycaprolactone (PCL) microparticles well separated with each other were prepared by crystallization from the dilute PCL solution in a porous 3D gelatin template. They had fuzzy and smooth surfaces on each side, and a size as large as 70 μm. The fuzzy surface of the particle adsorbed significantly larger amount of proteins, and was more cell-attractive regardless of the cell types. The particles showed stronger affinity toward fibroblasts over hepatocytes, which paved a new way for cell isolation merely based on the surface morphology. After a successive seeding process, Janus cell microparticles with fibroblasts and endothelial cells (ECs) on each side were designed and obtained by making use of the anisotropic surface morphology, which showed significant difference in EC functions in terms of prostacyclin (PGl2) secretion, demonstrating the unique and appealing functions of this type of anisotropic microspheres.

Angiogenic and Osteogenic Synergy of Human Mesenchymal Stem Cells and Human Umbilical Vein Endothelial Cells Cocultured on a Nanomatrix

To date, bone tissue regeneration strategies lack an approach that effectively provides an osteogenic and angiogenic environment conducive to bone growth. In the current study, we evaluated the osteogenic and angiogenic response of human mesenchymal stem cells (hMSCs) and green fluorescent protein-expressing human umbilical vein endothelial cells (GFP-HUVECs) cocultured on a self-assembled, peptide amphiphile nanomatrix functionalized with the cell adhesive ligand RGDS (PA-RGDS). Analysis of alkaline phosphatase activity, von Kossa staining, Alizarin Red quantification, and osteogenic gene expression, indicates a significant synergistic effect between the PA-RGDS nanomatrix and coculture that promoted hMSC osteogenesis. In addition, coculturing on PA-RGDS resulted in enhanced HUVEC network formation and upregulated vascular endothelial growth factor gene and protein expression. Though PA-RGDS and coculturing hMSCs with HUVECs were each previously reported to individually enhance hMSC osteogenesis, this study is the first to demonstrate a synergistic promotion of HUVEC angiogenesis and hMSC osteogenesis by integrating coculturing with the PA-RGDS nanomatrix. We believe that using the combination of hMSC/HUVEC coculture and PA-RGDS substrate is an efficient method for promoting osteogenesis and angiogenesis, which has immense potential as an efficacious, engineered platform for bone tissue regeneration.

Direct cell-cell communication with three-dimensional cell morphology on wrinkled microposts

Cell-cell communication plays a critical role in a myriad of processes, such as homeostasis, angiogenesis, and carcinogenesis, in multi-cellular organisms. Monolayer cell models have notably improved our understanding of cellular interactions. However, the cultured cells on the planar surfaces adopt a two-dimensional morphology, which poorly imitates cellular organization in vivo, providing physiologically-irrelevant cell responses. Non-planar surfaces comprising various patterns have demonstrated great abilities in directing cellular growth and producing different cell morphologies. In recent years, a few topographical substrates have provided valuable information about cell-cell signalling, however, none of these studies have reported a three-dimensional (3D) cell morphology. Here, we introduce a structurally tunable topographical platform that can maintain cell coupling while inducing a true 3D cell morphology. Optical imaging and fluorescence recovery after photobleaching are used to illustrate these capabilities. Our analyses suggest that the intercellular signalling on the present platform, which we propose is mainly through gap junctions, is comparable to that in natural tissue.

STATEMENT OF SIGNIFICANCE

A better understanding of direct cellular communication can help treating neurological diseases and cancers, which may be caused by dysfunctional intercellular signaling. To investigate cell-cell contact, cells are conventionally plated onto planar surfaces, where they flatten and adopt a two-dimensional cell morphology. These unrealistic models are physiologically-irrelevant since cells exhibit a three-dimensional (3D) shape in the body. Therefore, porous scaffolds and topographical surfaces, capable of inducing various cell morphologies, have been introduced, in which the latter is more desirable for sample imaging and screening. However, the few non-planar substrates used to study cell coupling have not produced a 3D cell shape. Here, we present a tunable culture platform that can control direct cell-cell communication while maintaining true 3D cell morphologies.

Two-Cell Spheroid Angiogenesis Assay System Using Both Endothelial Colony Forming Cells and Mesenchymal Stem Cells

Most angiogenesis assays are performed using endothelial cells. However, blood vessels are composed of two cell types: endothelial cells and pericytes. Thus, co-culture of two vascular cells should be employed to evaluate angiogenic properties. Here, we developed an in vitro 3-dimensional angiogenesis assay system using spheroids formed by two human vascular precursors: endothelial colony forming cells (ECFCs) and mesenchymal stem cells (MSCs). ECFCs, MSCs, or ECFCs+MSCs were cultured to form spheroids. Sprout formation from each spheroid was observed for 24 h by real-time cell recorder. Sprout number and length were higher in ECFC+MSC spheroids than ECFC-only spheroids. No sprouts were observed in MSC-only spheroids. Sprout formation by ECFC spheroids was increased by treatment with vascular endothelial growth factor (VEGF) or combination of VEGF and fibroblast growth factor-2 (FGF-2). Interestingly, there was no further increase in sprout formation by ECFC+MSC spheroids in response to VEGF or VEGF+FGF-2, suggesting that MSCs stimulate sprout formation by ECFCs. Immuno-fluorescent labeling technique revealed that MSCs surrounded ECFC-mediated sprout structures. We tested vatalanib, VEGF inhibitor, using ECFC and ECFC+MSC spheroids. Vatalanib significantly inhibited sprout formation in both spheroids. Of note, the IC₅₀ of vatalanib in ECFC+MSC spheroids at 24 h was 4.0 ± 0.40 μM, which are more correlated with the data of previous animal studies when compared with ECFC spheroids (0.2 ± 0.03 μM). These results suggest that ECFC+MSC spheroids generate physiologically relevant sprout structures composed of two types of vascular cells, and will be an effective pre-clinical in vitro assay model to evaluate pro- or anti-angiogenic property.

Improved vasculogenesis and bone matrix formation through coculture of endothelial cells and stem cells in tissue-specific methacryloyl gelatin-based hydrogels

The coculture of osteogenic and angiogenic cells and the resulting paracrine signaling via soluble factors are supposed to be crucial for successfully engineering vascularized bone tissue equivalents. In this study, a coculture system combining primary human adipose-derived stem cells (hASCs) and primary human dermal microvascular endothelial cells (HDMECs) within two types of hydrogels based on methacryloyl-modified gelatin (GM) as three-dimensional scaffolds was examined for its support of tissue specific cell functions. HDMECs, together with hASCs as supporting cells, were encapsulated in soft GM gels and were indirectly cocultured with hASCs encapsulated in stiffer GM hydrogels additionally containing methacrylate-modified hyaluronic acid and hydroxyapatite particles. After 14 days, the hASC in the stiffer gels (constituting the "bone gels") expressed matrix proteins like collagen type I and fibronectin, as well as bone-specific proteins osteopontin and alkaline phosphatase. After 14 days of coculture with HDMEC-laden hydrogels, the viscoelastic properties of the bone gels were significantly higher compared with the gels in monoculture. Within the soft vascularization gels, the formed capillary-like networks were significantly longer after 14 days of coculture than the structures in the control gels. In addition, the stability as well as the complexity of the vascular networks was significantly increased by coculture. We discussed and concluded that osteogenic and angiogenic signals from the culture media as well as from cocultured cell types, and tissue-specific hydrogel composition all contribute to stimulate the interplay between osteogenesis and angiogenesis in vitro and are a basis for engineering vascularized bone.

The effect of gap junction-mediated transfer of miR-200b on osteogenesis and angiogenesis in a co-culture of MSCs and HUVECs

For successful engineering of pre-vascularized bone tissue in vitro, understanding the interactions between vasculogenic cells and bone-forming cells is a prerequisite. Mounting evidence indicates that microRNAs can serve as intercellular signals that allow cell-cell communication. Here, the role of the transfer of the microRNA miR-200b between vasculogenic and osteogenic cells was explored in a co-culture system. Rat bone-marrow derived mesenchymal stem cells (BMSCs) formed functional gap junctions composed of connexin 43 (Cx43, also known as GJA1) with human umbilical vein endothelial cells (HUVECs), through which miR-200b could transfer from BMSCs to HUVECs to regulate osteogenesis and angiogenesis. As a negative regulator, the decrease in miR-200b level in BMSCs derepressed the expression of VEGF-A, leading to increased osteogenic differentiation. Once inside HUVECs, miR-200b reduced the angiogenic potential of HUVECs through downregulation of ZEB2, ETS1, KDR and GATA2 Additionally, TGF-β was found to trigger the transfer of miR-200b to HUVECs. Upon adding the TGF-β inhibitor SB431542 or TGF-β-neutralizing antibody, the formation of capillary-like structures in co-culture could be partially rescued. These findings may be fundamental to the development of a cell-based bone regeneration strategy.

Tension-loaded bone marrow stromal cells potentiate the paracrine osteogenic signaling of co-cultured vascular endothelial cells

Co-culture of bone marrow stromal cells (BMSCs) and vascular endothelial cells (VECs) is a promising strategy for better osteogenesis and pre-vascularization in bone tissue engineering. Recent reports have shown that mechanical stretching further promotes osteogenesis in BMSC/VEC co-culture systems, but the underlying mechanism of this process remains unclear. In this study, noncontact co-cultures of rat primary BMSCs and VECs were employed to interrogate paracrine cell-to-cell communications in response to tension. Exposure of VECs to 6% tension for 48 h elicited neither ALP activity nor mRNA expression of OCN and OPN in BMSCs incubated in a shared culture medium. Instead, BMSCs subjected to tension induced robust VEGF release, and its conditioned medium enhanced the proliferation and tubular formation of VECs with a concurrent increase in BMP-2 and IGF-1 production. Conditioned medium from activated VECs in turn promoted expression of osteogenic genes in BMSCs, followed by an increase in matrix mineralization. The addition of VEGF-R inhibitor Tivozanib to these systems abrogated the tension-induced paracrine effects on VECs and subsequently impaired BMSC osteogenesis. These results clearly demonstrate that the response of BMSCs to tension potentiates paracrine osteogenic signaling from VECs; this positive feedback loop is initiated by VEGF release.

Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model

Endothelial progenitor cells (EPCs) contribute to neovascularization in tumors. However, the relationship of EPCs and tumor-induced angiogenesis still remains to be clarified. The present study aimed at investigating the influence of 4 different tumor types on angiogenic properties of EPCs in an in vitro and in vivo rat model. It could be demonstrated that in vitro proliferation, migration, and angiogenic abilities and genetic modifications of EPCs are controlled in a tumor-type-dependent manner. The proangiogenic effect of mammary carcinoma, osteosarcoma, and rhabdomyosarcoma cells was more pronounced compared to colon carcinoma cells. Coinjection of encapsulated tumor cells, especially mammary carcinoma cells, and EPCs in a rat model confirmed a contributing effect of EPCs in tumor vascularization. Cytokines secreted by tumors such as monocyte chemoattractant protein 1, macrophage inflammatory protein 2, and TNF-related apoptosis-inducing ligand play a pivotal role in the tumor cell-EPC interaction, leading to enhanced migration and angiogenesis. With the present study, we were able to decipher possible underlying mechanisms by which EPCs are stimulated by tumor cells and contribute to tumor vascularization. The present study will contribute to a better understanding of tumor-induced vascularization, thus facilitating the development of therapeutic strategies targeting tumor-EPC interactions.-An, R., Schmid, R., Klausing, A., Robering, J. W., Weber, M., Bäuerle, T., Detsch, R., Boccaccini, A. R., Horch, R. E., Boos, A. M., Weigand, A. Proangiogenic effects of tumor cells on endothelial progenitor cells vary with tumor type in an in vitro and in vivo rat model.

Coculture of endothelial progenitor cells and mesenchymal stem cells enhanced their proliferation and angiogenesis through PDGF and Notch signaling

The beneficial effects of combined use of mesenchymal stem cells (MSCs) and endothelial progenitor cells (EPCs) on tissue repair and regeneration after injury have been demonstrated, but the underlying mechanism remains incompletely understood. This study aimed to investigate the effects of direct contact coculture of human bone marrow‐derived EPCs (hEPCs)/human bone marrow‐derived MSCs (hMSCs) on their proliferation and angiogenic capacities and the underlying mechanism. hEPCs and hMSCs were cocultured in a 2D mixed monolayer or a 3D transwell membrane cell‐to‐cell coculture system. Cell proliferation was determined by Cell Counting Kit‐8. Angiogenic capacity was evaluated by in vitro angiogenesis assay. Platelet‐derived growth factor‐BB (PDGF‐BB), PDGF receptor neutralizing antibody (AB‐PDGFR), and DAPT (a γ‐secretase inhibitor) were used to investigate PDGF and Notch signaling. Cell proliferation was significantly enhanced by hEPCs/hMSCs 3D‐coculture and PDGF‐BB treatment, but inhibited by AB‐PDGFR. Expression of cyclin D1, PDGFR, Notch1, and Hes1 was markedly enhanced by PDGF‐BB but inhibited by DAPT. In vitro angiogenesis assay showed that hEPCs/hMSCs coculture and PDGF‐BB significantly enhanced angiogenic capacity, whereas AB‐PDGFR significantly reduced the angiogenic capacity. PDGF‐BB increased the expression of kinase insert domain receptor (KDR, an endothelial marker) and activated Notch1 signaling in cocultured cells, while DAPT attenuated the promoting effect of PDGF‐BB on KDR expression of hEPCs/hMSCs coculture. hEPCs/hMSCs coculture enhanced their proliferation and angiogenic capacities. PDGF and Notch signaling pathways participated in the promoting effects of hEPCs/hMSCs coculture, and there was crosstalk between these two signaling pathways. Our findings should aid understanding of the mechanism of beneficial effects of hEPCs/hMSCs coculture.

Inhibiting PHD2 in bone marrow mesenchymal stem cells via lentiviral vector-mediated RNA interference facilitates the repair of periodontal tissue defects in SD rats

Hypoxia-inducible factors (HIFs) play an important role in angiogenesis, and they can activate the expression of several downstream angiogenic factors. HIF-1 is a major transcriptor of HIFs, composed of α and β subunits. Prolyl hydroxylase domain-containing protein 2 (PHD2) is the main catabolic enzyme for HIF-1α, and it can accelerate its degradation under normoxic conditions. PHD2 expression in bone marrow mesenchymal stem cells (BMMSCs) of SD rats was down-regulated under normoxic conditions in this study by utilizing lentiviral vector-mediated RNA interference to promote HIF-1α accumulation, thus enhancing the expression of angiogenic factors. A tissue-engineered compound was constructed using the composite collagen membrane of BMMSCs after PHD2 gene silencing to repair periodontal fenestration defects in SD rats. The results of this study indicated that, after PHD2 gene silencing, the osteogenic differentiation of BMMSCs was enhanced in vitro, the resistance of cells to oxidative stress was also validated in vitro, thereby illustrating the promotion of the repair of artificially constructed periodontal tissue defects in rats. The results of this study provide a reference and guidance for future applications of RNA interference in periodontal tissue engineering and serve as a basis for improving the survival of seed cells in recipient tissues.

Electrical stimulation of adipose-derived mesenchymal stem cells and endothelial cells co-cultured in a conductive scaffold for potential orthopaedic applications

Electrical stimulation (ES) has emerged as a useful tool to regulate cell behaviour, but the effect of ES on mesenchymal stem cell (MSC)/vasculogenic cell co-culture has not been investigated. Herein, human adipose-derived MSCs (AD-MSCs) and umbilical vein endothelial cells (HUVECs) were co-cultured in an electrically conductive polypyrrole/chitosan scaffold. Compared with AD-MSC monoculture, calcium deposition in the co-culture without and with ES (200 μA for 4 h/day) was 139% and 346% higher, respectively, after 7 days. As the application of ES to AD-MSC monoculture only increased calcium deposition by 56% compared with that without ES after 7 days, these results indicate that ES and co-culture with HUVECs have synergistic effects on AD-MSCs' osteogenic differentiation. ES application also significantly enhanced CD31 expression of HUVECs. In HUVEC monoculture, application of ES increased CD31 expression by 224%, whereas the corresponding increase in AD-MSC/HUVEC co-culture with ES application was 62%. The gene expression results indicate that ES enhanced the cellular functions in AD-MSC and HUVEC monoculture via autocrine bone morphogenetic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF), respectively. In co-culture, crosstalk between AD-MSCs and HUVECs due to paracrine BMP-2 and VEGF enhanced the cellular functions compared with the respective monoculture. With application of ES to the AD-MSC/HUVEC co-culture, autocrine signalling was enhanced, resulting in further promotion of cellular functions. These findings illustrate that co-culturing AD-MSC/HUVEC in a conductive scaffold with ES offers potential benefits for bone defect therapy.

Osteogenic Differentiation of Mesenchymal Stem Cells by Mimicking the Cellular Niche of the Endochondral Template

In vitro bone regeneration strategies that prime mesenchymal stem cells (MSCs) with chondrogenic factors, to mimic aspects of the endochondral ossification process, have been shown to promote mineralization and vascularization by MSCs both in vitro and when implanted in vivo. However, these approaches required the use of osteogenic supplements, namely dexamethasone, ascorbic acid, and β-glycerophosphate, none of which are endogenous mediators of bone formation in vivo. Rather MSCs, endothelial progenitor cells, and chondrocytes all reside in proximity within the cartilage template and might paracrineally regulate osteogenic differentiation. Thus, this study tests the hypothesis that an in vitro bone regeneration approach that mimics the cellular niche existing during endochondral ossification, through coculture of MSCs, endothelial cells, and chondrocytes, will obviate the need for extraneous osteogenic supplements and provide an alternative strategy to elicit osteogenic differentiation of MSCs and mineral production. The specific objectives of this study were to (1) mimic the cellular niche existing during endochondral ossification and (2) investigate whether osteogenic differentiation could be induced without the use of any external growth factors. To test the hypothesis, we evaluated the mineralization and vessel formation potential of (a) a novel methodology involving both chondrogenic priming and the coculture of human umbilical vein endothelial cells (HUVECs) and MSCs compared with (b) chondrogenic priming of MSCs alone, (c) addition of HUVECs to chondrogenically primed MSC aggregates, (d-f) the same experimental groups cultured in the presence of osteogenic supplements and (g) a noncoculture group cultured in the presence of osteogenic growth factors alone. Biochemical (DNA, alkaline phosphatase [ALP], calcium, CD31⁺, vascular endothelial growth factor [VEGF]), histological (alcian blue, alizarin red), and immunohistological (CD31⁺) analyses were conducted to investigate osteogenic differentiation and vascularization at various time points (1, 2, and 3 weeks). The coculture methodology enhanced both osteogenesis and vasculogenesis compared with osteogenic differentiation alone, whereas osteogenic supplements inhibited the osteogenesis and vascularization (ALP, calcium, and VEGF) induced through coculture alone. Taken together, these results suggest that chondrogenic and vascular priming can obviate the need for osteogenic supplements to induce osteogenesis of human MSCs in vitro, while allowing for the formation of rudimentary vessels.

Mechanical and Vascular Cues Synergistically Enhance Osteogenesis in Human Mesenchymal Stem Cells

Development and maintenance of a vascular network are critical for bone growth and homeostasis; strategies that promote vascular function are critical for clinical success of tissue-engineered bone constructs. Co-culture of endothelial cells (ECs) with mesenchymal stem cells (MSCs) and exposure to 10% cyclic tensile strain have both been shown to regulate osteogenesis in isolation, but potential synergistic effects have yet to be explored. The objective of this study was to expose an MSC-EC co-culture to 10% cyclic tensile strain to examine the role of this mechanical stimulus on MSC-EC behavior. We hypothesized that paracrine signaling from ECs would stimulate osteogenesis of MSCs, and exposure to 10% cyclic tensile strain would enhance this anabolic signal. Human umbilical vein ECs and human bone marrow-derived MSCs were either monocultured or co-cultured at a 1:1 ratio in a mixed osteo/angiogenic medium, exposed to 10% cyclic tensile strain at 1 Hz for 4 h/day for 2 weeks, and biochemically and histologically analyzed for endothelial and osteogenic markers. While neither 10% cyclic tensile strain nor co-culture alone had a significant effect on osteogenesis, the concurrent application of strain to an MSC-EC co-culture resulted in a significant increase in calcium accretion and mineral deposition, suggesting that co-culture and strain synergistically enhance osteogenesis. Neither co-culture, 10% cyclic tensile strain, nor a combination of these stimuli affected endothelial markers, indicating that the endothelial phenotype remained stable, but unresponsive to the stimuli evaluated in this study. This study is the first to investigate the role of cyclic tensile strain on the complex interplay between ECs and MSCs in co-culture. The results of this study provide key insights into the synergistic effects of 10% cyclic tensile strain and co-culture on osteogenesis. Understanding mechanobiological factors affecting MSC-EC crosstalk will help enhance strategies for creating vascularized tissues in tissue engineering and regenerative medicine.

Meloxicam temporally inhibits the expression of vascular endothelial growth factor receptor (VEGFR)-1 and VEGFR-2 during alveolar bone repair in rats

BACKGROUND

Vascular endothelial growth factor (VEGF) plays an important role during angiogenesis and bone repair. This study investigated whether the use of meloxicam alters bone repair via downregulation of VEGF and receptor expression.

METHODS

One hundred twenty male Wistar rats had their maxillary right incisor extracted. Animals were divided into a control group (CG; n = 60) and a meloxicam-treated group (TG; n = 60) that received either a single daily intraperitoneal injection of 0.9% NaCl or meloxicam 3 mg/kg, respectively, for 7 consecutive days. Alveolar bone repair was evaluated histomorphometrically, whereas VEGF and its receptors were analyzed by immunohistochemistry and quantitative polymerase chain reaction (qPCR). Data were submitted to two-way analysis of variance and Tukey post hoc test with P < 0.05.

RESULTS

Bone volume density increased significantly (P = 0.001) in both groups with a strong correlation between treatment and periods (P = 0.003). In the TG, a small amount of bone formation occurred compared with the CG between 3 and 21 days. No significant differences in the number of VEGF-positive cells per square millimeter (P = 0.07) and VEGF messenger RNA (mRNA) expression (P = 0.49) were found between groups. Immunostained cells per square millimeter and mRNA expression for VEGF receptor (VEGFR)-1 (P = 0.04 and P < 0.001) and VEGFR-2 (P < 0.001 for both analysis) showed a strong interaction between treatment groups and periods. In the TG, immunostained cells per square millimeter and mRNA expression for VEGFR-1 were, respectively, 89% and 37% lower from 3 to 10 days compared with the CG, whereas for VEGFR-2, these values were 252% and 60%, respectively, from 3 to 7 days.

CONCLUSION

In rat alveolar bone repair, meloxicam did not affect VEGF expression but downregulated VEGFR expression, which may cause a delay in the bone repair/remodeling process.

A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair

3D bioprinting has begun to show great promise in advancing the development of functional tissue/organ replacements. However, to realize the true potential of 3D bioprinted tissues for clinical use requires the fabrication of an interconnected and effective vascular network. Solving this challenge is critical, as human tissue relies on an adequate network of blood vessels to transport oxygen, nutrients, other chemicals, biological factors and waste, in and out of the tissue. Here, we have successfully designed and printed a series of novel 3D bone scaffolds with both bone formation supporting structures and highly interconnected 3D microvascular mimicking channels, for efficient and enhanced osteogenic bone regeneration as well as vascular cell growth. Using a chemical functionalization process, we have conjugated our samples with nano hydroxyapatite (nHA), for the creation of novel micro and nano featured devices for vascularized bone growth. We evaluated our scaffolds with mechanical testing, hydrodynamic measurements and in vitro human mesenchymal stem cell (hMSC) adhesion (4 h), proliferation (1, 3 and 5 d) and osteogenic differentiation (1, 2 and 3 weeks). These tests confirmed bone-like physical properties and vascular-like flow profiles, as well as demonstrated enhanced hMSC adhesion, proliferation and osteogenic differentiation. Additional in vitro experiments with human umbilical vein endothelial cells also demonstrated improved vascular cell growth, migration and organization on micro-nano featured scaffolds.

Transcriptomic Changes in Osteoblasts Following Endothelial Cell-Cocultivation Suggest a Role of Extracellular Matrix in Cellular Interaction

Vascularization is important for bone development, fracture healing and engineering of artificial bone tissue. In the context of bone tissue engineering, it was shown that coimplantation of human primary umbilical vein endothelial cells (HUVECs) and human osteoblasts (hOBs) results in the formation of functional blood vessels and enhanced bone regeneration. Implanted endothelial cells do not only contribute to blood vessel formation, but also support proliferation, cell survival and osteogenic differentiation of coimplanted hOBs. These effects are partially mediated by direct heterotypic cell contacts. In a previous report we could show that cocultivated hOBs strongly increase the expression of genes involved in extracellular matrix (ECM) formation in HUVECs, suggesting that ECM may be involved in the intercellular communication between hOBs and HUVECs. The present study aimed at investigating whether comparable changes occur in hOBs. We therefore performed a microarray analysis of hOBs cultivated in direct contact with HUVECs, revealing 1,004 differentially expressed genes. The differentially expressed genes could be assigned to the functional clusters ECM, proliferation, apoptosis and osteogenic differentiation. The microarray data could be confirmed by performing quantitative real time RT-PCR on selected genes. Furthermore, we could show that the ECM produced by HUVECs increased the expression of the osteogenic differentiation marker alkaline phosphatase (ALP) in hOBs. In summary, our data demonstrate that HUVECs provoke complex changes in gene expression patterns in cocultivated hOBs and that ECM plays and important role in this interaction. J. Cell. Biochem. 117: 1869-1879, 2016. © 2016 Wiley Periodicals, Inc.

Human endothelial and foetal femur-derived stem cell co-cultures modulate osteogenesis and angiogenesis

Background

A dynamic vasculature is a prerequisite for bone formation where the interaction of bone cells and endothelial cells is essential for both the development and the healing process of bone. Enhanced understanding of the specific mediators involved in bone cell and endothelial cell interactions offers new avenues for skeletal regenerative applications. This study has investigated the osteogenic and angiogenic potential of co-cultures of human foetal diaphyseal or epiphyseal cells with human umbilical vein endothelial cells (HUVEC) in the presence and absence of vascular endothelial growth factor (VEGF) supplementation.

Methods

Early osteogenic activities of the co-cultures (±VEGF) were assessed by alkaline phosphatase (ALP) activity. Osteogenic and angiogenic gene expression was measured using quantitative polymerase chain reaction. An ex vivo organotypic embryonic chick (E11) femur culture model was used to determine the osteogenic effects of VEGF as determined using micro-computed tomography (μCT) and Alcian blue/Sirius red histochemistry and immunocytochemistry for expression of CD31.

Results

ALP activity and gene expression of ALP and Type-1 collagen was enhanced in foetal skeletal/HUVECs co-cultures. In foetal diaphyseal/HUVECs co-cultures, VEGF reduced the levels of ALP activity and displayed a negligible effect on von Willebrand factor (vWF) and VEGF gene expression. In contrast, VEGF supplementation was observed to significantly increase FLT-1 and KDR gene expression in co-cultures with modulation of expression enhanced, compared to VEGF skeletal monocultures. In the organotypic chick model, addition of VEGF significantly enhanced bone formation, which coincided with elevated levels of CD31-positive  cells in the mid-diaphyseal region of the femurs.

Conclusion

These studies demonstrate a differential skeletal response of early foetal skeletal cells, when co-cultured with endothelial cells and the potential of co-culture models for bone repair. The differential effect of VEGF supplementation on markers of angiogenesis and osteogenesis in co-cultures and organ cultures, demonstrate the importance of the intricate temporal coordination of osteogenic and angiogenic processes during bone formation and implications therein for effective approaches to bone regenerative therapies.

Electronic supplementary material

The online version of this article (doi:10.1186/s13287-015-0270-3) contains supplementary material, which is available to authorized users.

Integrin-specific hydrogels functionalized with VEGF for vascularization and bone regeneration of critical-size bone defects

Vascularization of bone defects is considered a crucial component to the successful regeneration of large bone defects. Although vascular endothelial growth factor (VEGF) has been delivered to critical-size bone defect models to augment blood vessel infiltration into the defect area, its potential to increase bone repair remains ambiguous. In this study, we investigated whether integrin-specific biomaterials modulate the effects of VEGF on bone regeneration. We engineered protease-degradable, VEGF-loaded poly(ethylene glycol) (PEG) hydrogels functionalized with either a triple-helical, α2 β1 integrin-specific peptide GGYGGGP(GPP)5 GFOGER(GPP)5 GPC (GFOGER) or an αv β3 integrin-targeting peptide GRGDSPC (RGD). Covalent incorporation of VEGF into the PEG hydrogel allowed for protease degradation-dependent release of the protein while maintaining VEGF bioactivity. When applied to critical-size segmental defects in the murine radius, GFOGER-functionalized VEGF-free hydrogels exhibited significantly increased vascular volume and density and resulted in a larger number of thicker blood vessels compared to RGD-functionalized VEGF-free hydrogels. VEGF-loaded RGD hydrogels increased vascularization compared to VEGF-free RGD hydrogels, but the levels of vascularization for these VEGF-containing RGD hydrogels were similar to those of VEGF-free GFOGER hydrogels. VEGF transiently increased bone regeneration in RGD hydrogels but had no effect at later time points. In GFOGER hydrogels, VEGF did not show an effect on bone regeneration. However, VEGF-free GFOGER hydrogels resulted in increased bone regeneration compared to VEGF-free RGD hydrogels. These findings demonstrate the importance of integrin-specificity in engineering constructs for vascularization and associated bone regeneration.

Improving vascularization of engineered bone through the generation of pro-angiogenic effects in co-culture systems

One of the major problems with bone tissue engineering is the development of a rapid vascularization after implantation to supply the growing osteoblast cells with the nutrients to grow and survive as well as to remove waste products. It has been demonstrated that capillary-like structures produced in vitro will anastomose rapidly after implantation and become functioning blood vessels. For this reason, in recent years many studies have examined a variety of human osteoblast and endothelial cell co-culture systems in order to distribute osteoblasts on all parts of the bone scaffold and at the same time provide conditions for the endothelial cells to migrate to form a network of capillary-like structures throughout the osteoblast-colonized scaffold. The movement and proliferation of endothelial cells to form capillary-like structures is known as angiogenesis and is dependent on a variety of pro-angiogenic factors. This review summarizes human 2- and 3-D co-culture models to date, the types and origins of cells used in the co-cultures and the proangiogenic factors that have been identified in the co-culture models.

Influence of scaffold properties on the inter-relationship between human bone marrow derived stromal cells and endothelial cells in pro-osteogenic conditions

One of the significant challenges in bone tissue engineering is the integration of biomaterials designed to facilitate and stimulate mineralization with a simultaneously rapid rate of angiogenesis and vascularization of the tissue construct, a challenge complicated by our lack of knowledge of the interactions among key cell types and scaffold properties. This study compared functional activity of human bone marrow-derived stromal cells (hMSC) seeded onto a porous salt-leached poly(D,L-lactic acid) (PDLLA) scaffolds, with and without the incorporation of silk fibroin fibers and then further investigated their co-culture with human umbilical vein endothelial cells (HUVECs). Cell viability, proliferation, and alkaline phosphatase activity were measured for a range of time points in culture, with osteogenic and angiogenic marker immunolocalization and gene expression at selected stages. Our findings suggest that, despite similar porosity and pore size distribution exhibited by the PDLLA and PDLLA plus silk fibroin scaffolds, there were marked differences in cell distribution and function. In the absence of fibers, a highly osteogenic response was observed in hMSCs in the scaffolds co-cultured with endothelial cells, greater than that observed with hMSCs alone or in either of the scaffolds with fibers added. However, fiber presence clearly better supported endothelial cell cultures, as determined by greater levels of endothelial marker expression at both the gene and protein level after 3 weeks of culture. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research.

STATEMENT OF SIGNIFICANCE

A significant challenge in bone tissue engineering is to promote a rapid vascularization of the tissue construct in parallel to the extracellular matrix mineralization. The design of composite scaffolds integrating beneficial components of differing structures and materials to facilitate appropriate biological responses appears a promising yet challenging avenue of research. Here we investigated cultures of hMSCs and HUVECs on a silk fibroin enhanced PDLLA scaffold, showing that the final output of this in vitro system is not the linear sum of the effects of the single variables. These results are of interest as they demonstrate how the addition of endothelial cells can affect hMSC phenotype and that the output can be further modulated by the introduction of silk fibroin fibers.

Differential expression of vascular endothelial growth factor in human fetal skeletal site-specific tissues: Mandible versus femur

Vascular endothelial growth factor (VEGF) is a well-known mediator that signals through pathways in angiogenesis and osteogenesis. Angiogenesis and bone formation are coupled during either skeletal development or bone remodeling and repair occurring in postnatal life. In this study, we examined for the first time the expression of VEGF in human fetal mandibular and femoral bone in comparison with the respective adult tissues. Similarly to other craniofacial bones, but at variance with the axial and appendicular skeleton, during development mandible does not arise from mesoderm but neural crest cells of the neuroectoderm germ layer, and undergoes intramembranous instead of endochondral ossification. By quantitative real-time PCR technique, we could show that VEGF gene expression levels were significantly higher in fetal than in adult samples, especially in femoral tissue. Western blotting analysis confirmed higher protein expression of VEGF in the fetal femur respect to the mandible. Moreover, immunohistochemistry revealed that in both fetal tissues VEGF expression was mainly localized in pre- and osteoblasts. Differential expression of VEGF in femoral and mandibular bone tissues could be related to their different structure, function and development during organogenesis.

An in vitro bone tissue regeneration strategy combining chondrogenic and vascular priming enhances the mineralization potential of mesenchymal stem cells in vitro while also allowing for vessel formation

Chondrogenic priming (CP) of mesenchymal stem cells (MSCs) and coculture of MSCs with human umbilical vein endothelial stem cells (HUVECs) both have been shown to significantly increase the potential for MSCs to undergo osteogenic differentiation and mineralization in vitro and in vivo. Such strategies mimic cartilage template formation or vascularization that occur during endochondral ossification during early fetal development. However, although both chondrogenesis and vascularization are crucial precursors for bone formation by endochondral ossification, no in vitro bone tissue regeneration strategy has sought to incorporate both events simultaneously. The objective of this study is to develop an in vitro bone regeneration strategy that mimics critical aspects of the endochondral ossification process, specifically (1) the formation of a cartilage template and (2) subsequent vascularization of this template. We initially prime the MSCs with chondrogenic growth factors, to ensure the production of a cartilage template, and subsequently implement a coculture strategy involving MSC and HUVECs. Three experimental groups were compared; (1) CP for 21 days with no addition of cells; (2) CP for 21 days followed by coculture of HUVECs (250,000 cells); (3) CP for 21 days followed by coculture of HUVECs and MSCs (250,000 cells) at a ratio of 1:1. Each group was cultured for a further 21 days in osteogenic media after the initial CP period. Biochemical (DNA, Alkaline Phosphatase Activity, Calcium, and Vessel Endothelial Growth Factor) and histological analyses (Alcian blue, alizarin red, CD31(+), and collagen type X) were performed 1, 2, and 3 weeks after the media switch. The results of this study show that CP provides a cartilage-like template that provides a suitable platform for HUVEC and MSC cells to attach, proliferate, and infiltrate for up to 3 weeks. More importantly we show that the use of the coculture methodology, rudimentary vessels are formed within this cartilage template and enhanced the mineralization potential of MSCs. Taken together these results indicate for the first time that the application of both chondrogenic and vascular priming of MSCs enhances the mineralization potential of MSCs in vitro while also allowing the formation of immature vessels.

Fibroblast-endothelial partners for vascularization strategies in tissue engineering

Cell-based approaches have emerged as a promising therapy to achieve successful vascularization in tissue engineering. Since fibroblasts activation and migration is required for physiological events relying on angiogenesis, we hypothesize herein that different fibroblasts exhibit distinct capacity to promote capillary-like structures assembly, by mature and progenitor endothelial cells (ECs). Outgrowth endothelial cells (OECs) were isolated from human umbilical cord blood samples and characterized by immunofluorescence and imaging flow cytometry for endothelial markers. Coculture systems were established using either human umbilical vein ECs (HUVECs) or OECs with fibroblasts, being evaluated at 7, 14, and 21 days of culture. Two types of human dermal fibroblasts (HDF) were used, namely neonatal human foreskin fibroblasts-1 (HFF-1) and juvenile HDF. OECs expressed EC markers and formed capillary-like structures. HFF-1 exhibited higher expression of transglutaminase-2, while HDF exhibited a higher expression of α-smooth muscle actin (α-SMA) and podoplanin, which were not observed for HFF-1. Formation of capillary-like structures was only observed in cocultures with HDF and not with HFF-1. No significant differences were found between HDF and OECs or HUVECs cocultures. These findings suggest that HDF is a preferential cell source for promoting vascularization, either using mature or progenitor ECs, probably due to their higher expression of α-SMA and podoplanin, and increased synthesis of extracellular matrix. This work opens new research possibilities regarding the use of specific fibroblast populations cocultured with ECs, as efficient partners for vascular development in regenerative medicine strategies.