Cells, Scaffolds and Their Interactions in Myocardial Tissue Regeneration

A Review on the Applications of Natural Biodegradable Nano Polymers in Cardiac Tissue Engineering

As cardiac diseases, which mostly result in heart failure, are increasing rapidly worldwide, heart transplantation seems the only solution for saving lives. However, this practice is not always possible due to several reasons, such as scarcity of donors, rejection of organs from recipient bodies, or costly medical procedures. In the framework of nanotechnology, nanomaterials greatly contribute to the development of these cardiovascular scaffolds as they provide an easy regeneration of the tissues. Currently, functional nanofibers can be used in the production of stem cells and in the regeneration of cells and tissues. The small size of nanomaterials, however, leads to changes in their chemical and physical characteristics that could alter their interaction and exposure to stem cells with cells and tissues. This article aims to review the naturally occurring biodegradable nanomaterials that are used in cardiovascular tissue engineering for the development of cardiac patches, vessels, and tissues. Moreover, this article also provides an overview of cell sources used for cardiac tissue engineering, explains the anatomy and physiology of the human heart, and explores the regeneration of cardiac cells and the nanofabrication approaches used in cardiac tissue engineering as well as scaffolds.

Human-derived decellularized extracellular matrix scaffold incorporating autologous bone marrow stem cells from patients with congenital heart disease for cardiac tissue engineering

BACKGROUND

Stem cells are used as an alternative treatment option for patients with congenital heart disease (CHD) due to their regenerative potential, but they are subject to low retention rate in the injured myocardium. Also, the diseased microenvironment in the injured myocardium may not provide healthy cues for optimal stem cell function.

OBJECTIVE

In this study, we prepared a novel human-derived cardiac scaffold to improve the functional behaviors of stem cells.

METHODS

Decellularized extracellular matrix (ECM) scaffolds were fabricated by removing cells of human-derived cardiac appendage tissues. Then, bone marrow c-kit+ progenitor cells from patients with congenital heart disease were seeded on the cardiac ECM scaffolds. Cell adhesion, survival, proliferation and cardiac differentiation on human cardiac decellularized ECM scaffold were evaluated in vitro. Label-free mass spectrometry was applied to analyze cardiac ECM proteins regulating cell behaviors.

RESULTS

It was shown that cardiac ECM scaffolds promoted stem cell adhesion and proliferation. Importantly, bone marrow c-kit+ progenitor cells cultured on cardiac ECM scaffold for 14 days differentiated into cardiomyocyte-like cells without supplement with any inducible factors, as confirmed by the increased protein level of Gata4 and upregulated gene levels of Gata4, Nkx2.5, and cTnT. Proteomic analysis showed the proteins in cardiac ECM functioned in multiple biological activities, including regulation of cell proliferation, regulation of cell differentiation, and cardiovascular system development.

CONCLUSION

The human-derived cardiac scaffold constructed in this study may help repair the damaged myocardium and hold great potential for tissue engineering application in pediatric patients with CHD.

Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration

Cardiovascular disease is still one of the leading causes of death in the world, and heart transplantation is the current major treatment for end-stage cardiovascular diseases. However, because of the shortage of heart donors, new sources of cardiac regenerative medicine are greatly needed. The prominent development of tissue engineering using bioactive materials has creatively laid a direct promising foundation. Whereas, how to precisely pattern a cardiac structure with complete biological function still requires technological breakthroughs. Recently, the emerging three-dimensional (3D) bioprinting technology for tissue engineering has shown great advantages in generating micro-scale cardiac tissues, which has established its impressive potential as a novel foundation for cardiovascular regeneration. Whether 3D bioprinted hearts can replace traditional heart transplantation as a novel strategy for treating cardiovascular diseases in the future is a frontier issue. In this review article, we emphasize the current knowledge and future perspectives regarding available bioinks, bioprinting strategies and the latest outcome progress in cardiac 3D bioprinting to move this promising medical approach towards potential clinical implementation.

Tissue regeneration: an overview from stem cells to micrografts

Regenerative medicine represents a major challenge for the scientific community. The choice of the biological sources used, such as stem cells and grafts, is crucial. Stem cell therapy is mainly related to the use of mesenchymal stem cells; however, clinical trials are still needed to investigate their safety. The micrografting technique was conceived by Cicero Parker Meek in 1958. It is based on the principle that by increasing the superficial area of skin grafts and reducing the size of its particles, it is possible to cover an area larger than the original donor site. Stem cells are pluripotent cells that have the capacity to differentiate into all cell types and are self-renewing, whereas micrografts derive from a small fragment of an autologous tissue and exhibit limited differentiative potential compared with stem cells. Therefore, stem cells and micrografts cannot be considered equivalent, although in some cases they exhibit similar regenerative potential, which is the focus of this review. Last, stem cell therapies remain limited because of complex and costly processes, making them not very feasible in clinical practice, whereas obtaining micrografts is generally a one-step procedure that does not require any advanced tissue manipulation.

Electrospun Scaffolds and Induced Pluripotent Stem Cell-Derived Cardiomyocytes for Cardiac Tissue Engineering Applications

Tissue engineering (TE) combines cells, scaffolds, and growth factors to assemble functional tissues for repair or replacement of tissues and organs. Cardiac TE is focused on developing cardiac cells, tissues, and structures-most notably the heart. This review presents the requirements, challenges, and research surrounding electrospun scaffolds and induced pluripotent stem cell (iPSC)-derived cardiomyocytes (CMs) towards applications to TE hearts. Electrospinning is an attractive fabrication method for cardiac TE scaffolds because it produces fibers that demonstrate the optimal potential for mimicking the complex structure of the cardiac extracellular matrix (ECM). iPSCs theoretically offer the capacity to generate limitless numbers of CMs for use in TE hearts, however these iPSC-CMs are electrophysiologically, morphologically, mechanically, and metabolically immature compared to adult CMs. This presents a functional limitation to their use in cardiac TE, and research aiming to address this limitation is presented in this review.

Small-molecule-based generation of functional cardiomyocytes from human umbilical cord-derived induced pluripotent stem cells

The purpose of this study was to investigate the cardiac-differentiation potential of induced pluripotent stem cells (iPSCs) generated from human umbilical cord-derived mesenchymal cells. Spontaneous beating colonies were observed at day 7 after the sequential addition of CHIR99021 and IWP-4. The combined use of CHIR99021 and IWP-4 downregulated the expression of pluripotency markers while upregulating cardiac transcription factors and cardiomyocyte-specific markers. The derived cardiomyocytes demonstrated typical sarcomeric structures and action-potential features; most importantly, the derived cells exhibited responsiveness to β-adrenergic and muscarinic stimulations. The analyses of molecular, structural, and functional properties revealed that the derived cardiomyocytes were similar to cardiomyocytes derived from BJ foreskin fibroblast cells. In summary, our results demonstrate that functional cardiomyocytes can be generated from human umbilical cord-derived cells. The methodology described here has potential as a means for the production of functional cardiomyocytes from discarded human umbilical cord tissue.

Minimally Invasive and Regenerative Therapeutics

Advances in biomaterial synthesis and fabrication, stem cell biology, bioimaging, microsurgery procedures, and microscale technologies have made minimally invasive therapeutics a viable tool in regenerative medicine. Therapeutics, herein defined as cells, biomaterials, biomolecules, and their combinations, can be delivered in a minimally invasive way to regenerate different tissues in the body, such as bone, cartilage, pancreas, cardiac, skeletal muscle, liver, skin, and neural tissues. Sophisticated methods of tracking, sensing, and stimulation of therapeutics in vivo using nano-biomaterials and soft bioelectronic devices provide great opportunities to further develop minimally invasive and regenerative therapeutics (MIRET). In general, minimally invasive delivery methods offer high yield with low risk of complications and reduced costs compared to conventional delivery methods. Here, minimally invasive approaches for delivering regenerative therapeutics into the body are reviewed. The use of MIRET to treat different tissues and organs is described. Although some clinical trials have been performed using MIRET, it is hoped that such therapeutics find wider applications to treat patients. Finally, some future perspective and challenges for this emerging field are highlighted.

Stem Cell-Mediated Angiogenesis in Tissue Engineering Constructs

Angiogenesis has always been a concern in the field of tissue engineering. Poor vascularization of engineered constructs is a problem for the clinical success of these structures. Among the various methods employed to induce angiogenesis, stem cells provide a promising tool for the future. The present review aims to present the application of stem cells in the induction of angiogenesis. Additionally, it summarizes recent advancements in stem cell-mediated angiogenesis of different tissue engineering constructs.

Current Progress in 3D Bioprinting of Tissue Analogs

Tissue engineering has progressed tremendously over recent decades through the generation of functional tissue analogs. Traditional approaches based on seeding cells into scaffold are limited in their capacity to produce tissues with precise biomimetic properties. Three-dimensional (3D) bioprinting is one kind of fabrication technology used to precisely dispense cell-laden biomaterials for the construction of functional tissues or organs. In recent years, much research progress has been made in 3D bioprinting technology and its application in generating tissue analogs, including skin, heart valves, blood vessels, bone, and cardiac tissue. However, it still faces many technical challenges. In this review, we introduce the current progress in 3D bioprinting technology and focus on biomaterials and their potential applications in regenerative medicine and drug discovery. Current challenges are also discussed.

3D bioprinting for cardiovascular regeneration and pharmacology

Cardiovascular disease (CVD) is a major cause of morbidity and mortality worldwide. Compared to traditional therapeutic strategies, three-dimensional (3D) bioprinting is one of the most advanced techniques for creating complicated cardiovascular implants with biomimetic features, which are capable of recapitulating both the native physiochemical and biomechanical characteristics of the cardiovascular system. The present review provides an overview of the cardiovascular system, as well as describes the principles of, and recent advances in, 3D bioprinting cardiovascular tissues and models. Moreover, this review will focus on the applications of 3D bioprinting technology in cardiovascular repair/regeneration and pharmacological modeling, further discussing current challenges and perspectives.

Intracellular calcium ions and morphological changes of cardiac myoblasts response to an intelligent biodegradable conducting copolymer

A novel biodegradable conducting polymer, PLA-b-AP-b-PLA (PAP) triblock copolymer of poly (l-lactide) (PLA) and aniline pentamer (AP) with electroactivity and biodegradability, was synthesized and its potential application in cardiac tissue engineering was studied. The PAP copolymer presented better biocompatibility compared to PANi and PLA because of promoted cell adhesion and spreading of rat cardiac myoblasts (H9c2 cell line) on PAP/PLA thin film. After pulse electrical stimulation (5 V, 1 Hz, 500 ms) for 6 days, the proliferation ratio, and intracellular calcium concentration of H9c2 cells on PAP/PLA were improved significantly. Meanwhile, cell morphology changed by varying the pulse electrical signals. Especially, the oriented pseudopodia-like structure was observed from H9c2 cells on PAP/PLA after electrical stimulation. It is regarded that the novel conducting copolymer could enhance electronic signals transferring between cells because of its special electrochemical properties, which may result in the differentiation of cardiac myoblasts.