Novel Copper(II)-Selective Membrane Electrode Based on a New Synthesized Schiff Base

Membrane sensors based on Schiff bases as chelating ionophores--a review

The development of chemical sensors has received widespread attention during the past two decades because of their extensive use in environmental monitoring and clinical analysis via rapid, accurate, reproducible, and low-cost methods. Chemically modified CPEs have frequently been employed as potentiometric sensors in trace analysis for metal ions, organic pollutants and biological substances. Most of these electrodes are operated via the ion-exchange process of the active component incorporated into the carbon paste matrix. This review article concentrates on such achievements in the context of the general development across the field. An overview of potentiometric sensors that are capable of detecting metal ions in environmental samples is presented and discussed. A survey on important advances in potentiometric sensors with regard to high selectivity, lower detection limit, and fast response time is presented in this review article.

Poly(vinyl) chloride membrane copper-selective electrode based on 1-phenyl-2-(2-hydroxyphenylhydrazo)butane-1,3-dione

1-Phenyl-2-(2-hydroxyphenylhydrazo)butane-1,3-dione (H(2)L) was used as an effective ionophore for copper-selective poly(vinyl) chloride (PVC) membrane electrodes. Optimization of the composition of the membrane and of the conditions of the analysis was performed, and under the optimized conditions the electrode has a detection limit of 6.30×10(-7) M Cu(II) at pH 4.0 with response time 10s and displays a linear EMF versus log[Cu(2+)] response over the concentration range 2.0×10(-6) to 5.0×10(-3) M Cu(II) with a Nernstian slope of 28.80±0.11 mV/decade over the pH range of 3.0-8.0. The sensor is stable for 9 weeks and exhibits good selectivity with respect to alkali, alkali earth and transition metal ions (e.g. Na(+), K(+), Ba(2+), Ca(2+), Zn(2+), Cd(2+), Co(2+), Mn(2+), Ni(2+), Fe(2+), Al(3+)) in the 3.0-8.0 pH range. It was successfully applied for the direct determination of copper(II) in zinc, aluminum and nickel based alloys, in soils polluted by oil, and as an indicator electrode for potentiometric titration of copper ions with EDTA.