Preparation of RGO/TiO 2 photocatalyst and the mechanism of its hydrothermal process

A simple nanocomposite photocatalyst HT-rGO/TiO2 for deoxynivalenol degradation in liquid food

A simple nanocomposite photocatalyst HT-rGO/TiO₂ for deoxynivalenol (DON) degradation was synthesized by hydrothermal method to maintain the quality of cereal grains and byproducts. The characterization of HT-rGO/TiO₂ was analyzed by XRD, FTIR, Raman spectroscopy, and XPS. Moreover, according to UV-vis DRS analysis, HT-rGO/TiO₂ had a smaller band gap, indicating a wider response range to light and a higher utilized rate of quantum photons. Additionally, the results of LC-MS showed that the hydroxyl group at the C3 position, and the unsaturated bond between C9 and C10, and the epoxy group at C12 and C13 positions of DON molecule were destroyed step by step by photocatalytic degradation. These groups have active effects on the DON toxicity, which means it is successful to degrade DON in liquid-food by HT-rGO/TiO₂ photocatalyst.

Reduced Graphene Oxide/Waste-Derived TiO2 Composite Membranes: Preliminary Study of a New Material for Hybrid Wastewater Treatment

This work reports the preliminary results of the development of composite self-assembling membranes obtained by the combination of reduced graphene oxide (rGO) with commercial Degussa P25 titanium dioxide (TiO₂). The purpose is to demonstrate the possibility of combining, in the same self-standing material, the capability to treat wastewater containing both inorganic and organic pollutants by exploiting the established ability of rGO to capture metal ions together with that of TiO₂ to degrade organic substances. Moreover, this study also investigates the potential photocatalytic properties of tionite (TIO), to demonstrate the feasibility of replacing commercial TiO₂ with such waste-derived TiO₂-containing material, fulfilling a circular economy approach. Thus, rGO-TiO₂ and rGO-TIO composite membranes, 1:1 by weight, were prepared and characterized by SEM-EDX, XRD, thermogravimetry, as well as by Raman and UV-Vis spectroscopies to verify the effective and homogeneous integration of the two components. Then, they were tested towards 3-mg L^-1 aqueous synthetic solutions of Fe³⁺ and Cu²⁺ ions to evaluate their metal adsorption ability, with values of the order of 0.1-0.2 mmol g_membrane^-1, comparable or even slightly higher than those of pristine rGO. Finally, the ability of the composites to degrade a common organic pesticide, i.e., Imidacloprid^®, was assessed in preliminary photocatalysis experiments, in which maximum degradation efficiencies of 25% (after 3 h) for rGO-TiO₂ and of 21% (after 1 h) for rGO-TIO were found. The result of tionite-containing membranes is particularly promising and worthy of further investigation, given that the anatase content of tionite is roughly 1/6 of the one in commercial TiO₂.

Effective Strategies, Mechanisms, and Photocatalytic Efficiency of Semiconductor Nanomaterials Incorporating rGO for Environmental Contaminant Degradation

The water pollution problems severely affect the natural water resources due to the large disposal of dyes, heavy metals, antibiotics, and pesticides. Advanced oxidation processes (AOP) have been developed using semiconductor nanomaterials as photocatalysts for water treatment as an essential strategy to minimize environmental pollution. Significant research efforts have been dedicated over the past few years to enhancing the photocatalytic efficiencies of semiconductor nanomaterials. Graphene-based composites created by integrating reduced graphene oxide (rGO) into various semiconductor nanomaterials enable the unique characteristics of graphene, such as the extended range of light absorption, the separation of charges, and the high capacity of adsorption of pollutants. Therefore, rGO-based composites improve the overall visible-light photocatalytic efficiency and lead to a new pathway for high-performance photocatalysts’ potential applications. This brief review illustrates the strategies of combining rGO with various semiconductor nanomaterials and focuses primarily on modification and efficiency towards environmental contaminants.

Synthesis and degradation kinetics of TiO2/GO composites with highly efficient activity for adsorption and photocatalytic degradation of MB

Poriferous TiO₂/GO (denoted as TGO-x%) photocatalysts with ultrathin grapheme oxide (GO) layer were prepared by a hydrothermal method, the adsorption and photocatalytic degradation and its kinetics about Methylene blue(MB) were studied systematically. All the TGO-x% showed improved adsorption and photodegradation performance. TGO-25% had excellent adsorptivity while TGO-20% exhibit the highest visible light photocatalytic degradation activity. The adsorption capacity for TGO-25% was 20.25 mg/g_catalyst along with the k₁ was about 0.03393 min·g_catalyst/mg, this enhancement was mainly owing to the strong adsorption capacity of GO and the stacking structure of sheets and nanoparticles. GO sheets prevented the agglomeration of TiO₂ particles and TiO₂ nanoparticles also prevented the agglomeration of GO sheets, which could provides greater surface area. Besides, the remarkably superior photodegradation activity of TiO₂/GO composites is mainly attribute to the strong absorption of visible light and the effective charge separation revealed by the photoluminescence, the total removal rate of MB is 97.5% after 35 min adsorption and 140 min degradation, which is 3.5 times higher than that of TiO₂.