The overview and perspectives of biosensors and Mycobacterium tuberculosis: A systematic review

Recent advances in gold nanoparticles-based biosensors for tuberculosis determination

Tuberculosis (TB) is one of the major killer diseases affecting lung parenchymal tissues. Mycobacterium tuberculosis (Mtb) is the bacterium that causes it. It most commonly affects the lungs, although it can affect any part of the body, including the stomach, glands, bones, and nervous system. Although anti-mycobacterial drugs are available, it remains a major threat to public health due to the rise of drug-resistant strains, and early and accurate diagnosis is very important. Currently, research science and medical communities are focusing on the use of cost-effective biosensors to manage human biological processes and assess accurate health diagnostics. Due to their high sensitivity in chemical and biological assays, nanomaterials have been considered in the field of biosensors for better diagnosis, and among them, gold nanoparticles (AuNPs) can play an important role in accelerating the diagnosis of TB. Superior biocompatibility, conductivity, catalytic properties, high surface-to-volume ratio, and high density enable their widespread use in the fabrication of biosensors. This review evaluates the diagnostic accuracy of AuNP-based biosensors for the detection of Mtb. According to different transducers of biosensors, their structure, performance, advantages and limitations are summarized and compared. Moreover, the upcoming challenges in their analytical performance have been highlighted and the strategies to overcome those challenges have been briefly discussed.

Advances in the detection and diagnosis of tuberculosis using optical-based devices

Tuberculosis (TB), a bacterial infection caused by Mycobacterium tuberculosis, is highly contagious and can lead to severe health complications if left untreated. This review article discusses the importance of early detection and treatment and its global incidence and epidemiology, emphasizing its impact on vulnerable populations and its role as a major cause of death worldwide. Furthermore, it highlights the challenges faced with diagnosing TB. To overcome these challenges, point-of-care devices have emerged as promising tools for rapid and accurate TB detection. These include devices such as nucleic acid amplification tests (NAATs), lateral flow assays (LFAs), and microfluidic-based assays, which offer advantages such as rapid results, portability, and the ability to detect drug-resistant strains. Optical-based devices, such as photonic micro-ring sensors, silicon platform-based sensors, plasmonic-based platforms, microfluidics, and smartphone imaging, are some of the highlighted optical-based devices with the potential to detect TB. These devices can detect TB in sputum samples with high sensitivity and specificity. Optical-based diagnostic devices have the potential to offer the advantages of detecting low concentrations of target molecules and being adaptable to detect multiple targets simultaneously. Using these devices in a clinical setting makes them suitable for their application in improving access to diagnostic testing that enables earlier detection and treatment of TB. Furthermore, these devices would improve TB's global health issue, which requires comprehensive research, prevention, and treatment efforts.

Current and Future Technologies for the Detection of Antibiotic-Resistant Bacteria

Antibiotic resistance is a global public health concern, posing a significant threat to the effectiveness of antibiotics in treating bacterial infections. The accurate and timely detection of antibiotic-resistant bacteria is crucial for implementing appropriate treatment strategies and preventing the spread of resistant strains. This manuscript provides an overview of the current and emerging technologies used for the detection of antibiotic-resistant bacteria. We discuss traditional culture-based methods, molecular techniques, and innovative approaches, highlighting their advantages, limitations, and potential future applications. By understanding the strengths and limitations of these technologies, researchers and healthcare professionals can make informed decisions in combating antibiotic resistance and improving patient outcomes.

A Methodical Review on the Applications and Potentialities of Using Nanobiosensors for Disease Diagnosis

Presently, with the introduction of nanotechnology, the evolutions and applications of biosensors and/or nanobiosensors are becoming prevalent in various scientific domains such as environmental and agricultural sciences as well as biomedical, clinical, and healthcare sciences. Trends in these aspects have led to the discovery of various biosensors/nanobiosensors with their tremendous benefits to mankind. The characteristics of the various biosensors/nanobiosensors are primarily based on the nature of nanomaterials/nanoparticles employed in the sensing mechanisms. In the last few years, the identification, as well as the detection of biological markers linked with any form of diseases (communicable or noncommunicable), has been accomplished by several sensing procedures using nanotechnology vis-à-vis biosensors/nanobiosensors. Hence, this study employs a systematic approach in reviewing some contemporary developed exceedingly sensitive nanobiosensors alongside their biomedical, clinical, or/and healthcare applications as well as their potentialities, specifically for the detection of some deadly diseases drawn from some of the recent publications. Ways forward in the form of future trends that will advance creative innovations of the potentialities of nanobiosensors for biomedical, clinical, or/and healthcare applications particularly for disease diagnosis are also highlighted.

Portable immunosensor directly and rapidly detects Mycobacterium tuberculosis in sputum

Tuberculosis (TB) remains a public health problem that cannot be ignored. The portable and efficient detection of Mycobacterium tuberculosis (MTB) is important for the effective control of this disease. However, current detection techniques do not meet the requirements for MTB detection in the actual environment and often require cumbersome detection steps that are time consuming and inflexible. In this study, a portable immunosensor to detect MTB in sputum was prepared and then subjected to interface characterizations, such as scanning electron microscopy, hydrophilic angle test, and fluorescence characterization. The source and gate voltage of the device were optimized and tested using a non-contact photoresponse. The results showed that the sensitivity of the sensor to luminance increases with the decrease in source voltage. The gate voltage can substantially improve the response of the immunosensor to the normalized current of protein and amplify the signal at least 1.6 times. The optimal voltage detection conditions of source voltage (0.3 V) and gate voltage (0.1 V) were also determined. Several common proteins present in simulated saliva were used for anti-interference tests, and the sensor exhibited good specificity. Finally, the dilution gradient of an actual TB sputum sample was optimized. In the absence of preconditioning, a double-blind experiment was used to distinguish between the sputum from patients with TB and healthy individuals to shorten the TB detection time to a few minutes. Compared with the hospital's conventional detection method using cultures, the proposed method can complete the detection in a shorter time. This study provides a new strategy for the portable diagnosis of TB.

Rapid detection of airborne protein from Mycobacterium tuberculosis using a biosensor detection system

The developed biosensor detection system can complete the detection of air samples by collecting exhaled breath condensate, greatly reducing the time to diagnose tuberculosis.

Differential Diagnosis of Abdominal Tuberculosis in the Adult-Literature Review

Tuberculosis (TB) is a public health issue that affects mostly, but not exclusively, developing countries. Abdominal TB is difficult to detect at first, with the incidence ranging from 10% to 30% of individuals with lung TB. Symptoms are non-specific, examinations can be misleading, and biomarkers commonly linked with other diseases can also make appropriate diagnosis difficult. As a background for this literature review, the method used was to look into the main characteristics and features of abdominal tuberculosis that could help with differentiation on the PubMed, Science Direct, and Academic Oxford Journals databases. The results were grouped into three categories: A. general features (the five forms of abdominal tuberculosis: wet and dry peritonitis, lymphadenopathy, lesions at the level of the cavitary organs, lesions at the level of the solid organs), B. different intra-abdominal organs and patterns of involvement (oesophageal, gastro-duodenal, jejunal, ileal, colorectal, hepatosplenic, and pancreatic TB with calcified lymphadenopathy, also with description of extraperitoneal forms), and C. special challenges of the differential diagnosis in abdominal TB (such as diagnostic overlap, the disease in transplant candidates and transplant recipients, and zoonotic TB). The study concluded that, particularly in endemic countries, any disease manifesting with peritonitis, lymphadenopathy, or lesions at the level of the intestines or solid organs should have workups and protocols applied that can confirm/dismiss the suspicion of abdominal tuberculosis.

Advances in Antimicrobial Resistance Monitoring Using Sensors and Biosensors: A Review

The indiscriminate use and mismanagement of antibiotics over the last eight decades have led to one of the main challenges humanity will have to face in the next twenty years in terms of public health and economy, i.e., antimicrobial resistance. One of the key approaches to tackling antimicrobial resistance is clinical, livestock, and environmental surveillance applying methods capable of effectively identifying antimicrobial non-susceptibility as well as genes that promote resistance. Current clinical laboratory practices involve conventional culture-based antibiotic susceptibility testing (AST) methods, taking over 24 h to find out which medication should be prescribed to treat the infection. Although there are techniques that provide rapid resistance detection, it is necessary to have new tools that are easy to operate, are robust, sensitive, specific, and inexpensive. Chemical sensors and biosensors are devices that could have the necessary characteristics for the rapid diagnosis of resistant microorganisms and could provide crucial information on the choice of antibiotic (or other antimicrobial medicines) to be administered. This review provides an overview on novel biosensing strategies for the phenotypic and genotypic determination of antimicrobial resistance and a perspective on the use of these tools in modern health-care and environmental surveillance.

A comprehensive review on the applications of nano-biosensor-based approaches for non-communicable and communicable disease detection

The outstretched applications of biosensors in diverse domains has become the reason for their attraction for scientific communities. Because they are analytical devices, they can detect both quantitative and qualitative biological components through the generation of detectable signals. In the recent past, biosensors witnessed significant changes and developments in their design as well as features. Nanotechnology has revolutionized sensing phenomena by increasing biodiagnostic capacity in terms of specificity, size, and cost, resulting in exceptional sensitivity and flexibility. The steep increase of non-communicable diseases across the world has emerged as a matter of concern. In parallel, the abrupt outbreak of communicable diseases poses a serious threat to mankind. For decreasing the morbidity and mortality associated with various communicable and non-communicable diseases, early detection and subsequent treatment are indispensable. Detection of different biological markers generates quantifiable signals that can be electrochemical, mass-based, optical, thermal, or piezoelectric. Speculating on the incumbent applicability and versatility of nano-biosensors in large disciplines, this review highlights different types of biosensors along with their components and detection mechanisms. Moreover, it deals with the current advancements made in biosensors and the applications of nano-biosensors in detection of various non-communicable and communicable diseases, as well as future prospects of nano-biosensors for diagnostics.