Method of platinum-carbon coating of ultrathin sections for transmission and scanning electron microscopy: An application for study of biological composites

Attachment devices and the tarsal gland of the bug Coreus marginatus (Hemiptera: Coreidae)

The present ultrastructural investigation using scanning and transmission electron microscopy as well as light and fluorescence microscopy describes in detail the attachment devices and tarsal gland of the bug Coreus marginatus (L.) (Hemiptera: Coreidae). In particular, the fine structure of pulvilli reveals a ventral surface rich with pore channels, consistent with fluid emission, and a folded dorsal surface, which could be useful to enhance the pulvillus contact area during attachment to the substrate. The detailed description of the tarsal gland cells, whose structure is coherent with an active secretory function, allows us to consider the tarsal gland as the plausible candidate for the adhesive fluid production. Scolopidia strictly adhering to the gland cells are also described. On the basis of the fine structure of the tarsal gland, we hypothesise a fluid emission mechanism based on changes of the hydraulic pressure inside the gland, due to the unguitractor tendon movements. This mechanism could provide the fluid release based on compression of the pad and capillary suction, as demonstrated in other insects. The data here reported can contribute to understanding of insect adhesive fluid production, emission and control of its transport.

NEXAFS imaging to characterize the physio-chemical composition of cuticle from African Flower Scarab Eudicella gralli

The outermost surface of insect cuticle is a high-performance interface that provides wear protection, hydration, camouflage and sensing. The complex and inhomogeneous structure of insect cuticle imposes stringent requirements on approaches to elucidate its molecular structure and surface chemistry. Therefore, a molecular understanding and possible mimicry of the surface of insect cuticle has been a challenge. Conventional optical and electron microscopies as well as biochemical techniques provide information about morphology and chemistry but lack surface specificity. We here show that a near edge X-ray absorption fine structure microscope at the National Synchrotron Light Source can probe the surface chemistry of the curved and inhomogeneous cuticle of the African flower scarab. The analysis shows the distribution of organic and inorganic surface species while also hinting at the presence of aragonite at the dorsal protrusion region of the Eudicella gralli head, in line with its biological function.

Biology serves as inspiration in materials development; this requires improved understanding of the surface chemistry responsible for processes which are being mimicked. Here, the authors report on the use of near edge X-ray absorption fine structure (NEXAFS) imaging to analyze the surface chemistry of insect cuticle.

Functional morphology of tarsal adhesive pads and attachment ability in ticks Ixodes ricinus (Arachnida, Acari, Ixodidae)

The presence of well-developed, elastic claws on ticks and widely pilose hosts led us to hypothesise that ticks are mostly adapted to attachment and locomotion on rough, strongly corrugated and hairy, felt-like substrates. However, by using a combination of morphological and experimental approaches, we visualised the ultrastructure of attachment devices of Ixodes ricinus and showed that this species adheres more strongly to smooth surfaces than to rough ones. Between paired, elongated, curved, elastic claws, I. ricinus bears a large, flexible, foldable adhesive pad, which represents an adaptation to adhesion on smooth surfaces. Accordingly, ticks attached strongest to glass and to surface profiles similar to those of the human skin, generating safety factors (attachment force relative to body weight) up to 534 (females). Considerably lower attachment force was found on silicone substrates and as a result of thanatosis after jolting.

Visualisation of Native Surfaces by Two-Step Molding

One of the most important tasks of microscopy is to provide information about structures in their natural state. Since most life science microscopy procedures require fixation, dehydration, drying, and sectioning, diverse artefacts are unavoidable. It is also possible to dehydrate the water content of a specimen by freeze-drying. However, even relatively stable surface structures are changed during such treatments. Methods of liquid substitution and freezing-substitution show good results for biological specimens with a waxy solid coverage (Ensikat and Barthlott, 1993) and soft specimens in a mechanically deformed state (Gorb et al., 2000).

However, all these methods have certain restrictions for some types of specimens. For example, there are numerous biological surfaces covered with secretory fluids. Some specimens bear solid waxy coverings, which can be partly dissolved and washed out in organic solvents, such as ethanol, acetone, or propylenoxide. Often one would like to visualise dynamic processes (growth, deformation, or crystallisation) under environmental conditions, but at the high resolution in the SEM.

Topographic contrast of ultrathin cryo-sections for correlative super-resolution light and electron microscopy

Fluorescence microscopy reveals molecular expression at nanometer resolution but lacks ultrastructural context information. This deficit often hinders a clear interpretation of results. Electron microscopy provides this contextual subcellular detail, but protein identification can often be problematic. Correlative light and electron microscopy produces complimentary information that expands our knowledge of protein expression in cells and tissue. Inherent methodological difficulties are however encountered when combining these two very different microscopy technologies. We present a quick, simple and reproducible method for protein localization by conventional and super-resolution light microscopy combined with platinum shadowing and scanning electron microscopy to obtain topographic contrast from the surface of ultrathin cryo-sections. We demonstrate protein distribution at nuclear pores and at mitochondrial and plasma membranes in the extended topographical landscape of tissue.

Evaporation dynamics of tarsal liquid footprints in flies (Calliphora vicina)and beetles (Coccinella septempunctata)

Insect tarsal adhesive structures secrete a thin layer of fluid into the contact area. It was previously reported that the presence of this fluid significantly increases adhesion on various substrata. Previous data obtained from representatives of different insect groups suggest a difference not only in the chemical composition of the fluid, but also in its physical properties. In the present study, we have measured for the first time changes in the droplet geometry over time and the evaporation rate of the fluid in flies (Calliphora vicina) and beetles (Coccinella septempunctata) by the use of atomic force microscopy. Flattened droplets of the beetle had lower evaporation rates than hemispherical footprints of the fly. Within 1 h, the droplet volume reduced to 21% of the initial volume for the fly, and to 65% for the beetle, suggesting a larger fraction of volatile compounds in the fly fluid. It was revealed that drop geometry changes significantly during evaporation and shows pinning effects for the fly footprints due to an assumed self-organizing oil layer on top of the water fraction of the micro-emulsion. The data obtained suggest that the adhesion strength in capillarity-based switchable adhesive systems must be time-dependent because of the specific evaporation rate of the adhesive fluid. These results are important for our understanding of the functional mechanism of insect adhesive systems and also for biomimetics of artificial capillarity-based adhesive systems.

Tarsal morphology and attachment ability of the codling moth Cydia pomonella L. (Lepidoptera, Tortricidae) to smooth surfaces

Despite several studies on the attachment ability of different insect taxa, little is known about this phenomenon in adult Lepidoptera. In this study we combined morphological and experimental analyses of tarsal adhesive devices and the attachment ability of the codling moth Cydia pomonella (L.) (Lepidoptera, Tortricidae) to smooth surfaces. Pretarsi of C. pomonella attach to smooth substrates by means of their smooth, flexible and well developed arolia. Using the centrifugal force measurement technique, friction forces of males and females were assessed on hydrophobic and hydrophilic glass surfaces. Adults of both sexes generated similar forces in spite of the noticeable difference in their body masses. That is why males showed significantly higher safety factors (attachment force divided by body weight) compared to those of females. Hydrophobicity of the substrate had no considerable effect on friction forces. For females, friction forces (sliding parallel to the substrate plane) were compared with adhesive forces (pulling off perpendicularly from the substrate plane) measured on Plexiglas surfaces. It can be concluded that the attachment system of C. pomonella is rather robust against physico-chemical properties of the substrate and is able to achieve a very good attachment on vertical and horizontal substrata.

Composite structure of the crystalline epicuticular wax layer of the slippery zone in the pitchers of the carnivorous plant Nepenthes alata and its effect on insect attachment

The slippery zone situated below the peristome inside pitchers of most carnivorous plants from the genus Nepenthes is covered with a thick layer of epicuticular wax. This slippery zone is reported to play a crucial role in animal trapping and prey retention. In N. alata, the wax coverage consists of two clearly distinguished layers. These layers differ in their structure, chemical composition and mechanical properties, and they reduce the insect attachment in different ways. The lower layer resembles foam, composed of interconnected membraneous platelets protruding from the surface at acute angles. The upper layer consists of densely placed separate irregular platelets, located perpendicular to the subjacent layer. Crystals of the upper layer bear small stalks, directed downwards and providing connections to the lower layer. These morphological distinctions correlate with differences in the chemical composition of waxes. The compound classes of alkanes, aldehydes, primary alcohols, free fatty acids, esters and triterpenoids occurred in extracts from both wax layers, but in different proportions. Chain length distributions in aliphatics were different in extracts from the lower and the upper wax layers. Waxes of the upper and lower layers exhibited different mechanical properties: wax of the lower layer is harder and stiffer than that of the upper layer. Moreover, crystals of the upper layer are brittle and may be easily exfoliated or broken to tiny pieces. Laboratory experiments using tethered insects showed that both wax layers reduce the attachment force of insects. It is assumed that a decrease in insect attachment on the two distinct wax layers is provided by the two different mechanisms: (1) crystals of the upper wax layer contaminate insects' adhesive pads; (2) the lower wax layer leads to a reduction of the real contact area of insects' feet with the plant surface.