Counting and measuring IMPs and pits: why accurate counts are exceedingly rare

Freeze fracture: new avenues for the ultrastructural analysis of cells in vitro

The ultrastructural analysis of biological membranes by freeze fracture has a 60-year tradition. In this review, we summarize the benefits of the freeze-fracture technique and review special structures analyzed by freeze fracture and by combined freeze-fracture replica immunogold labeling (FRIL) of cell cultures. In principle, every cellular membrane whether of cell suspensions, mono- or bilayers of cell cultures can be analyzed in freeze fracture. The combination of freeze fracture and immunogold labeling of the replica allows the ultrastructural identification of protein assemblies in combination with the molecular identification of their constituent proteins using specific antibodies. The analysis of fractured and labeled intramembrane particles enables determination of the arrangement and organization of proteins within the membrane due to the high resolution of the transmission electron microscope. Because of cell-specific ultrastructural features such as square arrays, identification of cell types can be performed in parallel. This review is aimed at presenting the possibilities of freeze fracture and FRIL in the high-resolution ultrastructural analysis of membrane proteins and their assembly in naïve, transfected or otherwise treated cultured cells. At the interface of molecular approaches and morphology, the application of FRIL in genetically modified cells provides a novel and intriguing aspect for their analysis.

Mixed Electrical-Chemical Synapses in Adult Rat Hippocampus are Primarily Glutamatergic and Coupled by Connexin-36

Dendrodendritic electrical signaling via gap junctions is now an accepted feature of neuronal communication in mammalian brain, whereas axodendritic and axosomatic gap junctions have rarely been described. We present ultrastructural, immunocytochemical, and dye-coupling evidence for “mixed” (electrical/chemical) synapses on both principal cells and interneurons in adult rat hippocampus. Thin-section electron microscopic images of small gap junction-like appositions were found at mossy fiber (MF) terminals on thorny excrescences of CA3 pyramidal neurons (CA3pyr), apparently forming glutamatergic mixed synapses. Lucifer Yellow injected into weakly fixed CA3pyr was detected in MF axons that contacted four injected CA3pyr, supporting gap junction-mediated coupling between those two types of principal cells. Freeze-fracture replica immunogold labeling revealed diverse sizes and morphologies of connexin-36-containing gap junctions throughout hippocampus. Of 20 immunogold-labeled gap junctions, seven were large (328–1140 connexons), three of which were consistent with electrical synapses between interneurons; but nine were at axon terminal synapses, three of which were immediately adjacent to distinctive glutamate receptor-containing postsynaptic densities, forming mixed glutamatergic synapses. Four others were adjacent to small clusters of immunogold-labeled 10-nm E-face intramembrane particles, apparently representing extrasynaptic glutamate receptor particles. Gap junctions also were on spines in stratum lucidum, stratum oriens, dentate gyrus, and hilus, on both interneurons and unidentified neurons. In addition, one putative GABAergic mixed synapse was found in thin-section images of a CA3pyr, but none were found by immunogold labeling, suggesting the rarity of GABAergic mixed synapses. Cx36-containing gap junctions throughout hippocampus suggest the possibility of reciprocal modulation of electrical and chemical signals in diverse hippocampal neurons.

Gap junction assembly: roles for the formation plaque and regulation by the C-terminus of connexin43

Gap junction (GJ) “formation plaques” are distinct membrane domains with GJ precursors; they assemble by means of a series of defined steps. The C-terminus of Cx43 is required for normal progression of assembly, normal aggregation of 10-nm particles into small GJs, and negative regulation of assembly involving protein kinase C.

Using an established gap junction (GJ) assembly system with experimentally reaggregated cells, we analyzed “formation plaques” (FPs), apparent sites of GJ assembly. Employing freeze-fracture electron microscopy methods combined with filipin labeling of sterols and immunolabeling for connexin43 (Cx43), we demonstrated that FPs constitute distinct membrane “domains” and that their characteristic 10-nm particles contain connexin43, thus representing precursors (i.e., GJ hemichannels) engaged in assembly. Analysis of FPs in new systems—HeLa and N2A cells—resolved questions surrounding several key but poorly understood steps in assembly, including matching of FP membranes in apposed cells, reduction in the separation between FP membranes during assembly, and the process of particle aggregation. Findings also indicated that “docking” of GJ hemichannels occurs within FP domains and contributes to reduction of intermembrane separation between FPs. Other experiments demonstrated that FPs develop following a major C-terminal truncation of Cx43 (M257), although assembly was delayed. Particle aggregation also occurred at lower densities, and densities of particles within developing GJ aggregates failed to achieve full-length levels. With regard to regulation, inhibition of assembly following protein kinase C activation failed to occur in the M257 truncation mutants, as measured by intercellular dye transfer. However, several C-terminal serine mutations failed to disrupt inhibition.

Aquaporin-4 square array assembly: opposing actions of M1 and M23 isoforms

Osmotic homeostasis in the brain involves movement of water through aquaporin-4 (AQP4) membrane channels. Perivascular astrocyte end-feet contain distinctive orthogonal lattices (square arrays) assembled from 4- to 6-nm intramembrane particles (IMPs) corresponding to individual AQP4 tetramers. Two isoforms of AQP4 result from translation initiation at methionine residues M1 and M23, but no functional differences are known. In this study, Chinese hamster ovary cells were transfected with M1, M23, or M1+M23 isoforms, and AQP4 expression was confirmed by immunoblotting, immunocytochemistry, and immunogold labeling. Square array organization was examined by freeze-fracture electron microscopy. In astrocyte end-feet, >90% of 4- to 6-nm IMPs were found in square arrays, with 65% in arrays of 13-30 IMPs. In cells transfected with M23, 95% of 4- to 6-nm IMPs were in large assemblies (rafts), 85% of which contained >100 IMPs. However, in M1 cells, >95% of 4- to 6-nm IMPs were present as singlets, with <5% in incipient arrays of 2-12 IMPs. In M1+M23 cells, 4- to 6-nm IMPs were in arrays of intermediate sizes, resembling square arrays in astrocytes. Structural cross-bridges of 1 x 2 nm linked >90% of IMPs in M23 arrays ( approximately 1,000 cross-bridges per microm2) but were rarely seen in M1 cells. These studies show that M23 and M1 isoforms have opposing effects on intramembrane organization of AQP4: M23 forms large square arrays with abundant cross-bridges; M1 restricts square array assembly.

Envelope structure of Synechococcus sp. WH8113, a nonflagellated swimming cyanobacterium

BACKGROUND

Many bacteria swim by rotating helical flagellar filaments. Waterbury et al. discovered an exception, strains of the cyanobacterium Synechococcus that swim without flagella or visible changes in shape. Other species of cyanobacteria glide on surfaces. The hypothesis that Synechococcus might swim using traveling surface waves prompted this investigation.

RESULTS

Using quick-freeze electron microscopy, we have identified a crystalline surface layer that encloses the outer membrane of the motile strain Synechococcus sp. WH8113, the components of which are arranged in a rhomboid lattice. Spicules emerge in profusion from the layer and extend up to 150 nm into the surrounding fluid. These spicules also send extensions inwards to the inner cell membrane where motility is powered by an ion-motive force.

CONCLUSION

The envelope structure of Synechococcus sp. WH8113 provides new constraints on its motile mechanism. The spicules are well positioned to transduce energy at the cell membrane into mechanical work at the cell surface. One model is that an unidentified motor embedded in the cell membrane utilizes the spicules as oars to generate a traveling wave external to the surface layer in the manner of ciliated eukaryotes.

Improved structural detail in freeze-fracture replicas: high-angle shadowing of gap junctions cooled below -170 degrees C and protected by liquid nitrogen-cooled shrouds

In conventional freeze-fracture replicas, precise complementarity of membrane faces is seldom achieved. In a model system frequently used to evaluate replica quality, vertebrate gap junctions are usually visualized as patches of 8-10 nm P-face intramembrane particles separated by 1-2 nm spaces, while E-face images are represented by 4-6 nm conical pits separated by 5-7 nm wide membrane ridges. However, that disparity in sizes of particles versus pits, as well as the disparity in the widths of the spaces separating particles versus pits, suggests that a significant reduction in complementarity of membrane faces has occurred. In this investigation, a JEOL JFD-9000 freeze-etch machine was modified so that fracturing and replication could be performed at temperatures much colder than commonly employed. With the addition of cryopumps to improve overall vacuum and the installation of optically tight LN2-cooled shrouds surrounding the specimen and the knife, water vapor contamination arising from all sources within the vacuum chamber was reduced substantially, allowing replicas to be made at temperatures down to -185 degrees C. With the specimen at these much colder temperatures, water vapor released by the heat of cleaving was also reduced significantly, providing additional improvement in replica quality. In addition, with higher shadowing angles (greater than 60 degrees) and with the specimen at a much lower temperature, the grain size of the platinum film was noticeably reduced, thereby improving resolution at the molecular level. Under these improved conditions, replicas of rat liver gap junctions revealed that many of the P-face IMPs were tubes 6-7 nm in diameter, but that other IMPs had been stretched and distorted by the fracturing process. More important, however, these high resolution replicas revealed that the replicas of the E-face pits represented three-dimensional molecular casts of the transmembrane proteins comprising the connexon hexamer. This means that before they were replicated, the E-face pits faithfully maintained the shape that the IMPs had before fracturing. These more detailed images revealed a new structure in the center of each E-face pit: a 2-3 nm "peg" that may represent the frozen aqueous matrix of the connexon ion channel that remained after elastic extraction of the surrounding six connexin molecules. Thus, high-angle shadowing at very low specimen temperature under virtually non-contaminating conditions has revealed a new level of detail for membrane structure in freeze-fracture replicas.