Anisotropic properties of bovine nasal cartilage

Properties of the Nasal Cartilage, from Development to Adulthood: A Scoping Review

OBJECTIVE

Nasal septum cartilage is a hyaline cartilage that provides structural support to the nasal cavity and midface. Currently, information on its cellular and mechanical properties is widely dispersed and has often been inferred from studies conducted on other cartilage types such as the knee. A detailed understanding of nasal cartilage properties is important for several biological, clinical, and engineering disciplines. The objectives of this scoping review are to (1) consolidate actual existing knowledge on nasal cartilage properties and (2) identify gaps of knowledge and research questions requiring future investigations.

DESIGN

This scoping review incorporated articles identified using PROSPERO, Cochrane Library (CDSR and Central), WOS BIOSIS, WOS Core Collection, and ProQuest Dissertations and Theses Global databases. Following the screening process, 86 articles were considered. Articles were categorized into three groups: growth, extracellular matrix, and mechanical properties.

RESULTS

Most articles investigated growth properties followed by extracellular matrix and mechanical properties. NSC cartilage is not uniform. Nasal cartilage growth varies with age and location. Similarly, extracellular matrix composition and mechanical properties are location-specific within the NSC. Moreover, most articles included in the review investigate these properties in isolation and only very few articles demonstrate the interrelationship between multiple cartilage properties.

CONCLUSIONS

This scoping review presents a first comprehensive description of research on NSC properties with a focus on NSC growth, extracellular matrix and mechanical properties. It additionally identifies the needs (1) to understand how these various cartilage properties intersect and (2) for more granular, standardized assessment protocols to describe NSC.

Facial Cartilaginous Reconstruction-A Historical Perspective, State-of-the-Art, and Future Directions

Importance: Reconstruction of facial deformity poses a significant surgical challenge due to the psychological, functional, and aesthetic importance of this anatomical area. There is a need to provide not only an excellent colour and contour match for skin defects, but also a durable cartilaginous structural replacement for nasal or auricular defects. The purpose of this review is to describe the history of, and state-of-the-art techniques within, facial cartilaginous surgery, whilst highlighting recent advances and future directions for this continually advancing specialty. Observations: Limitations of synthetic implants for nasal and auricular reconstruction, such as silicone and porous polyethylene, have meant that autologous cartilage tissue for such cases remains the current gold standard. Similarly, tissue engineering approaches using unrelated cells and synthetic scaffolds have shown limited in vivo success. There is increasing recognition that both the intrinsic and extrinsic microenvironment are important for tissue engineering and synthetic scaffolds fail to provide the necessary cues for cartilage matrix secretion. Conclusions and Relevance: We discuss the first-in-man studies in the context of biomimetic and developmental approaches to engineering durable cartilage for clinical translation. Implementation of engineered autologous tissue into clinical practise could eliminate donor site morbidity and represent the next phase of the facial reconstruction evolution.

Topographical and zonal patterns of T2 relaxation in osteoarthritic tibial cartilage by low- and high-resolution MRI

PURPOSE

This study aimed to establish the topographical and zonal T2 patterns of multi-resolution MRI in medial tibial cartilage in a canine model of osteoarthritis (OA), initiated by the anterior cruciate ligament (ACL) transection surgery, and studied after 8-weeks and 12-weeks post-surgery.

METHODS

Articular cartilage from healthy, two stages of contralateral, and of OA knees were quantitatively imaged by the MRI T2 protocols at two imaging resolutions (100 and 17.6 μm/pixel). The zonal T2 changes at five topographical locations (anterior (AMT), exterior (EMT), posterior (PMT), central (CMT) and interior (IMT) medial tibia) and subsequent two averaged regions (covered by meniscus and exposed) were analyzed. At each location, full-thickness cartilage was studied in four sub-tissue zones (superficial, transitional, upper and lower radial zones).

RESULTS

Tissue degradation can be detected by measurable changes of T2, which is resolution- and orientation-dependent. T2 changes ranging from +28.82% increase (SZ, PMT) to -23.15% decrease (RZ1, AMT) in healthy to disease (8C), with the largest increase of T2 in the surface tissue. Various location-dependent patterns of degradation are found over the tibial surface, most commonly shown in early-stage OA (8C) on the anterior site, different from the posterior. Finally, the contralateral cartilage has specific degradation patterns, different from those in OA cartilage.

CONCLUSIONS

This is the first quantitative and highest multi-resolution characterization of cartilage at five topographical locations over the medial tibial plateau with fine zonal resolution in an animal model of OA, which would benefit future investigation of human OA in clinics.

Morphological and biomechanical characterization of immature and mature nasoseptal cartilage

Nasoseptal cartilage has been assumed to be isotropic, unlike the well-defined zonal organization of articular cartilage attributed to postnatal biomechanical loading. We know from clinical experience that malrotation of surgical nasoseptal cartilage grafts can lead to increased graft absorption. Other studies have also suggested directionally dependent compressive stiffness suggesting anisotropy, but morphological investigations are lacking. This study characterizes immature and mature native bovine nasoseptal cartilage using a combination of immunohistochemistry, biomechanical testing and structural imaging. Our findings indicate that there is extensive postnatal synthesis and reorganization of the extracellular matrix in bovine nasoseptal cartilage, independent of joint loading forces responsible for articular cartilage anisotropy. Immature nasoseptal cartilage is more cellular and homogenous compared to the zonal organization of cells and extracellular matrix of mature cartilage. Mature samples also exhibited greater glycosaminoglycan content and type II collagen fibre alignment compared to immature cartilage and this correlates with greater compressive stiffness. Engineered neocartilage often consists of immature, isotropic, homogenous tissue that is unable to meet the functional and mechanical demands when implanted into the native environment. This study demonstrates the importance of anisotropy on biomechanical tissue strength to guide future cartilage tissue engineering strategies for surgical reconstruction.

Differences between human septal and alar cartilage with respect to biomechanical features and biochemical composition

Cartilage grafts have become popular in facial plastic surgery to reconstruct defects or to improve aesthetic outcomes in various applications. But there is a considerable rate of graft failure like resorption or deformation. To improve graft survival and function, accurate understanding of the properties of the recipient site is indispensable. Therefore 10 noses of human cadavers were meticulously dissected and specimens of alar and septal cartilage subjected to confined compression and tensile tests. Furthermore, cell number, glycosaminoglycan and hydroxyproline content were measured. RESULTS: showed a significant difference (p < 0.05) of alar and septal cartilage regarding Equilibrium Modulus, cell number and glycosaminoglycan but not hydroxyproline content. Tensile tests showed a significant difference (p < 0.001) between alar and septal cartilage (vertical vector of force) for E-modulus, maximal force and maximal strain but not for horizontal vector of force. There was a significant difference (p < 0.05) within septal cartilage samples depending on vector of force (vertical vs. horizontal). Finally multifactorial linear regression allowed an estimation of Equilibrium Modulus depending on compression, glycosaminoglycan content and cell number with statistical significance (p < 0.05). In conclusion, nasal cartilage differs in function and composition depending on anatomical location and the prevalent forces. Therefore further research will be necessary to evaluate if graft failure depends on a mismatch of functional properties and if grafts can be adapted to the recipient site.

Combination of Mesenchymal Stem Cells, Cartilage Pellet and Bioscaffold Supported Cartilage Regeneration of a Full Thickness Articular Surface Defect in Rabbits

BACKGROUND

Mesenchymal stem cells (MSCs) and/or biological scaffolds have been used to regenerate articular cartilage with variable success. In the present study we evaluated cartilage regeneration using a combination of bone marrow (BM)-MSCs, Hyalofast^TM and/or native cartilage tissue following full thickness surgical cartilage defect in rabbits.

METHODS

Full-thickness surgical ablation of the medial-tibial cartilage was performed in New Zealand white (NZW) rabbits. Control rabbits (Group-I) received no treatment; Animals in other groups were treated as follows. Group-II: BM-MSCs (1 × 10⁶ cells) + Hyalofast^TM; Group-III: BMMSCs (1 × 10⁶ cells) + cartilage pellet (CP); and Group-IV: BM-MSCs (1 × 10⁶ cells) + Hyalofast^TM + CP. Animals were sacrificed at 12 weeks and cartilage regeneration analyzed using histopathology, International Cartilage Repair Society (ICRS-II) score, magnetic resonance observation of cartilage repair tissue (MOCART) score and biomechanical studies.

RESULTS

Gross images showed good tissue repair (Groups IV > III > Group II) and histology demonstrated intact superficial layer, normal chondrocyte arrangement, tidemark and cartilage matrix staining (Groups III and IV) compared to the untreated control (Group I) respectively. ICRS-II score was 52.5, 65.0, 66 and 75% (Groups I-IV) and the MOCART score was 50.0, 73.75 and 76.25 (Groups II-IV) respectively. Biomechanical properties of the regenerated cartilage tissue in Group IV closed resembled that of a normal cartilage.

CONCLUSION

Hyalofast^TM together with BM-MSCs and CP led to efficient cartilage regeneration following full thickness surgical ablation of tibial articular cartilage in vivo in rabbits. Presence of hyaluronic acid in the scaffold and native microenvironment cues probably facilitated differentiation and integration of BM-MSCs.

The distribution patterns of COMP and matrilin-3 in septal, alar and triangular cartilages of the human nose

The biomechanical characteristics of septal cartilage depend strongly on the distinct extracellular matrix of cartilage tissue; therefore, it is essential that the components of this matrix are identified and understood. Cartilage oligomeric matrix protein (COMP) and matrilin-3 are localised in articular cartilage. This study was the first to examine all subtypes of mature human nasal cartilages (alar, triangular and septal) with specific attention to the distribution of COMP and matrilin-3. Three whole fresh-frozen noses from human donors were dissected, and exemplary biopsies were examined using histochemical staining (haematoxylin and eosin and Alcian blue) and immunohistochemistry (collagen II, COMP and matrilin-3). The following three zones within the nasal cartilage were identified: superficial, intermediate and central. COMP was detected as highest in the intermediate zones in all three subtypes of nasal cartilage, whereas matrilin-3 was detected with pericellular deposition mainly within septal cartilage predominantly in the superficial zones. The distinct staining patterns of COMP and matrilin-3 underscore the different functional roles of both proteins in nasal cartilage. According to the literature, COMP might be involved with collagen II in the formation of networks, whereas matrilin-3 is reported to prevent ossification or regulate mechanosensitivity. The predominant staining observed in septal cartilage suggests matrilin-3's modulatory role because of its presence in the osteochondral junctional zone and given that the biomechanical load in septal cartilage is different from that in alar or triangular cartilage. In conclusion, COMP and matrilin-3 were detected in mature human nasal cartilage but displayed different staining patterns that might be explained by the functional roles of the respective matrix protein; however, further research is necessary to identify and define the functional aspects of this morphological difference.

Quantifying NMR relaxation correlation and exchange in articular cartilage with time domain analysis

Measured nuclear magnetic resonance (NMR) transverse relaxation data in articular cartilage has been shown to be multi-exponential and correlated to the health of the tissue. The observed relaxation rates are dependent on experimental parameters such as solvent, data acquisition methods, data analysis methods, and alignment to the magnetic field. In this study, we show that diffusive exchange occurs in porcine articular cartilage and impacts the observed relaxation rates in T₁-T₂ correlation experiments. By using time domain analysis of T₂-T₂ exchange spectroscopy, the diffusive exchange time can be quantified by measurements that use a single mixing time. Measured characteristic times for exchange are commensurate with T₁ in this material and so impacts the observed T₁ behavior. The approach used here allows for reliable quantification of NMR relaxation behavior in cartilage in the presence of diffusive fluid exchange between two environments.

The biomechanical role of the chondrocranium and sutures in a lizard cranium

The role of soft tissues in skull biomechanics remains poorly understood. Not least, the chondrocranium, the portion of the braincase which persists as cartilage with varying degrees of mineralization. It also remains commonplace to overlook the biomechanical role of sutures despite evidence that they alter strain distribution. Here, we examine the role of both the sutures and the chondrocranium in the South American tegu lizard Salvator merianae We use multi-body dynamics analysis (MDA) to provide realistic loading conditions for anterior and posterior unilateral biting and a detailed finite element model to examine strain magnitude and distribution. We find that strains within the chondrocranium are greatest during anterior biting and are primarily tensile; also that strain within the cranium is not greatly reduced by the presence of the chondrocranium unless it is given the same material properties as bone. This result contradicts previous suggestions that the anterior portion (the nasal septum) acts as a supporting structure. Inclusion of sutures to the cranium model not only increases overall strain magnitudes but also leads to a more complex distribution of tension and compression rather than that of a beam under sagittal bending.

Biomechanical Characterization of Human Soft Tissues Using Indentation and Tensile Testing

Regenerative medicine aims to engineer materials to replace or restore damaged or diseased organs. The mechanical properties of such materials should mimic the human tissues they are aiming to replace; to provide the required anatomical shape, the materials must be able to sustain the mechanical forces they will experience when implanted at the defect site. Although the mechanical properties of tissue-engineered scaffolds are of great importance, many human tissues that undergo restoration with engineered materials have not been fully biomechanically characterized. Several compressive and tensile protocols are reported for evaluating materials, but with large variability it is difficult to compare results between studies. Further complicating the studies is the often destructive nature of mechanical testing. Whilst an understanding of tissue failure is important, it is also important to have knowledge of the elastic and viscoelastic properties under more physiological loading conditions. This report aims to provide a minimally destructive protocol to evaluate the compressive and tensile properties of human soft tissues. As examples of this technique, the tensile testing of skin and the compressive testing of cartilage are described. These protocols can also be directly applied to synthetic materials to ensure that the mechanical properties are similar to the native tissue. Protocols to assess the mechanical properties of human native tissue will allow a benchmark by which to create suitable tissue-engineered substitutes.

Biomechanical Characterisation of the Human Auricular Cartilages; Implications for Tissue Engineering

Currently, autologous cartilage provides the gold standard for auricular reconstruction. However, synthetic biomaterials offer a number of advantages for ear reconstruction including decreased donor site morbidity and earlier surgery. Critical to implant success is the material’s mechanical properties as this affects biocompatibility and extrusion. The aim of this study was to determine the biomechanical properties of human auricular cartilage. Auricular cartilage from fifteen cadavers was indented with displacement of 1 mm/s and load of 300 g to obtain a Young’s modulus in compression. Histological analysis of the auricle was conducted according to glycoprotein, collagen, and elastin content. The compression modulus was calculated for each part of the auricle with the tragus at 1.67 ± 0.61 MPa, antitragus 1.79 ± 0.56 MPa, concha 2.08 ± 0.70 MPa, antihelix 1.71 ± 0.63 MPa, and helix 1.41 ± 0.67 MPa. The concha showed to have a significantly greater Young’s Elastic Modulus than the helix in compression (p < 0.05). The histological analysis demonstrated that the auricle has a homogenous structure in terms of chondrocyte morphology, extracellular matrix and elastin content. This study provides new information on the compressive mechanical properties and histological analysis of the human auricular cartilage, allowing surgeons to have a better understanding of suitable replacements. This study has provided a reference, by which cartilage replacements should be developed for auricular reconstruction.

Biomechanical characterisation of the human nasal cartilages; implications for tissue engineering

Nasal reconstruction is currently performed using autologous grafts provides but is limited by donor site morbidity, tissue availability and potentially graft failure. Additionally, current alternative alloplastic materials are limited by their high extrusion and infection rates. Matching mechanical properties of synthetic materials to the native tissue they are replacing has shown to be important in the biocompatibility of implants. To date the mechanical properties of the human nasal cartilages has not been studied in depth to be able to create tissue-engineered replacements with similar mechanical properties to native tissue. The young's modulus was characterized in compression on fresh-frozen human cadaveric septal, alar, and lateral cartilage. Due to the functional differences experienced by the various aspects of the septal cartilage, 16 regions were evaluated with an average elastic modulus of 2.72 ± 0.63 MPa. Furthermore, the posterior septum was found to be significantly stiffer than the anterior septum (p < 0.01). The medial and lateral alar cartilages were tested at four points with an elastic modulus ranging from 2.09 ± 0.81 MPa, with no significant difference between the cartilages (p < 0.78). The lateral cartilage was tested once in all cadavers with an average elastic modulus of 0.98 ± 0.29 MPa. In conclusion, this study provides new information on the compressive mechanical properties of the human nasal cartilage, allowing surgeons to have a better understanding of the difference between the mechanical properties of the individual nasal cartilages. This study has provided a reference, by which tissue-engineered should be developed for effective cartilage replacements for nasal reconstruction.

Properties and Mechanobiological Behavior of Bovine Nasal Septum Cartilage

Bovine nasal septum (BNS) is a source of non-load bearing hyaline cartilage. Little information is available on its mechanical and biological properties. The aim of this work was to assess the characteristics of BNS cartilage and investigate its behavior in in vitro mechanobiological experiments. Mechanical tests, biochemical assays, and microscopic assessment were performed for tissue characterization. Compressions tests showed that the tissue is viscoelastic, although values of elastic moduli differ from the ones of other cartilaginous tissues. Water content was 78 ± 1.4%; glycosaminoglycans and collagen contents-measured by spectrophotometric assay and hydroxyproline assay-were 39 ± 5% and 25 ± 2.5% of dry weight, respectively. Goldner's Trichrome staining and transmission electron microscopy proved isotropic cells distribution and results of earlier cell division. Furthermore, gene expression was measured after uniaxial compression, showing variations depending on compression time as well as trends depending on equilibration time. In conclusion, BNS has been characterized at several levels, revealing that bovine nasal tissue is regionally homogeneous. Results suggest that, under certain conditions, BNS could be used to perform in vitro cartilage loading experiments.

Mechanical Loading of Cartilage Explants with Compression and Sliding Motion Modulates Gene Expression of Lubricin and Catabolic Enzymes

OBJECTIVE

Translation of the contact zone in articulating joints is an important component of joint kinematics, yet rarely investigated in a biological context. This study was designed to investigate how sliding contact areas affect cartilage mechanobiology. We hypothesized that higher sliding speeds would lead to increased extracellular matrix mechanical stress and the expression of catabolic genes.

DESIGN

A cylindrical Teflon indenter was used to apply 50 or 100 N normal forces at 10, 40, or 70 mm/s sliding speed. Mechanical parameters were correlated with gene expressions using a multiple linear regression model.

RESULTS

In both loading groups there was no significant effect of sliding speed on any of the mechanical parameters (strain, stress, modulus, tangential force). However, an increase in vertical force (from 50 to 100 N) led to a significant increase in extracellular matrix strain and stress. For 100 N, significant correlations between gene expression and mechanical parameters were found for TIMP-3 (r(2) = 0.89), ADAMTS-5 (r(2) = 0.73), and lubricin (r(2) = 0.73).

CONCLUSIONS

The sliding speeds applied do not have an effect on the mechanical response of the cartilage, this could be explained by a partial attainment of the "elastic limit" at and above a sliding speed of 10 mm/s. Nevertheless, we still found a relationship between sliding speed and gene expression when the tissue was loaded with 100 N normal force. Thus despite the absence of speed-dependent mechanical changes (strain, stress, modulus, tangential force), the sliding speed had an influence on gene expression.

Compressive and tensile mechanical properties of the porcine nasal septum

The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2-10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.

Experimental issues in the measurement of multi-component relaxation times in articular cartilage by microscopic MRI

A number of experimental issues in the measurement of multi-component T2 and T1ρ relaxations in native and enzymatically digested articular cartilage were investigated by microscopic MRI (μMRI). The issues included the bath solutions (physiological saline and phosphate buffered saline (PBS)), the imaging resolution (35-140 μm), the specimen orientations (0° and 55°), and the strength of spin-lock frequencies (0.5-2 kHz) in the T1ρ experiments. In addition to cartilage, the samples of agar gel and doped water solution were also used in the investigation. Two imaging sequences were used: CPMG-SE and MSME. All raw data were analyzed by the non-negative least square (NNLS) method. The MSME sequence was shown to result in the observation of multi-component T2, even in the gel and liquid samples, demonstrating the artificial uncleanness of this sequence in the multi-component measurements. The soaking of cartilage in PBS reduced the observable T2 components to one at both 0° and 55°, suggesting the effect of phosphate ions on proton exchange between different pools of water molecules. The cartilage orientation with respect to the external magnetic field and the spin-lock strengths in the T1ρ experiment both affected the quantification of the multi-component relaxation. The transitions between a mono-component and multi-components in cartilage under various experimental conditions call for the extra caution in interpreting the relaxation results.

Mechanical behavior of bovine nasal cartilage under static and dynamic loading

Abnormal mechanical loading may trigger cartilage degeneration associated with osteoarthritis. Tissue response to load has been the subject of several in vitro studies. However, simple stimuli were often applied, not fully mimicking the complex in vivo conditions. Therefore, a rolling/plowing explant test system (RPETS) was developed to replicate the combined in vivo loading patterns. In this work we investigated the mechanical behavior of bovine nasal septum (BNS) cartilage, selected as tissue approximation for experiments with RPETS, under static and dynamic loading. Biphasic material properties were determined and compared with those of other cartilaginous tissues. Furthermore, dynamic loading in plowing modality was performed to determine dynamic response and experimental results were compared with analytical models and Finite Elements (FE) computations. Results showed that BNS cartilage can be modeled as a biphasic material with Young's modulus E=2.03 ± 0.7 MPa, aggregate modulus HA=2.35 ± 0.7 MPa, Poisson's ratio ν=0.24 ± 0.07, and constant hydraulic permeability k0=3.0 ± 1.3 × 10(-15)m(4)(Ns)(-1). Furthermore, dynamic analysis showed that plowing induces macroscopic reactions in the tissue, proportionally to the applied loading force. The comparison among analytical, FE analysis and experimental results showed that predicted tangential forces and sample deformation lay in the range of variation of experimental results for one specific experimental condition. In conclusion, mechanical properties of BNS cartilage under both static and dynamic compression were assessed, showing that this tissue behave as a biphasic material and has a viscoelastic response to dynamic forces.

MRI of articular cartilage at microscopic resolution

This review briefly summarises some of the definitive studies of articular cartilage by microscopic MRI (µMRI) that were conducted with the highest spatial resolutions. The article has four major sections. The first section introduces the cartilage tissue, MRI and µMRI, and the concept of image contrast in MRI. The second section describes the characteristic profiles of three relaxation times (T1, T2 and T1ρ) and self-diffusion in healthy articular cartilage. The third section discusses several factors that can influence the visualisation of articular cartilage and the detection of cartilage lesion by MRI and µMRI. These factors include image resolution, image analysis strategies, visualisation of the total tissue, topographical variations of the tissue properties, surface fibril ambiguity, deformation of the articular cartilage, and cartilage lesion. The final section justifies the values of multidisciplinary imaging that correlates MRI with other technical modalities, such as optical imaging. Rather than an exhaustive review to capture all activities in the literature, the studies cited in this review are merely illustrative.

Fourier-transform infrared spectroscopic imaging of articular cartilage and biomaterials: A review

Fourier transform infrared spectroscopy (FTIR) has the potential to mark up the chemical changes of the materials, as almost all the materials contain their signatures in infrared region. Spectroscopy combined with spatial resolution enables the possibility of characterizing samples up to microscopic level. The emerging development of instrumentation to provide spatial information for infrared (IR) spectroscopy, termed as IR microscopy, provides an opening for newer applications in terms of image analysis, novel data processing tools, etc. Characterization of biomaterials using IR spectroscopy has a trace back to 1950s. The advent of FTIR with imaging capability made characterization possible in cartilage tissue and other biological systems. Extensive analysis of chemical constituents of cartilage and tendon, collagen orientation and polarization property of cartilage using FTIR imaging (FTIRI) has been actively explored during the last two decades. Also, studies using specialized instrumentations like synchrotron FTIR imaging have been attempted to understand the characteristics of biological samples like cartilage. This review covers most of those investigations on cartilage with FTIRI to characterize the same in terms of component characteristics and quantification, collagen orientation, zonal boundary determination, influence of mechanical compression on tissue nature and its correlation to other techniques in last 20 years.

Orientational dependent sensitivities of T2 and T1ρ towards trypsin degradation and Gd-DTPA2- presence in bovine nasal cartilage

OBJECTIVE

To study the orientational dependencies of T(2) and T(1ρ) in native and trypsin-degraded bovine nasal cartilage, with and without the presence of 1 mM Gd-DTPA(2-).

MATERIALS AND METHODS

Sixteen specimens were prepared in two orthogonal fibril directions (parallel and perpendicular), treated using different protocols (native, Gd treated, trypsin-treated, and combination), and imaged using μMRI at 0° and 55° (the magic angle) fibril orientations with respect to the magnetic field B(0). Two-dimensional (2D) T(2) and T(1ρ) images were then calculated quantitatively.

RESULTS

Without Gd, native perpendicular tissues demonstrated significant T(1ρ) dispersion (including T(2) at the zero spin-lock field) at 0° and less dispersion at 55°, while native parallel specimens exhibited smaller T(1ρ) dispersion at both 0° and 55°. Trypsin degradation caused a minimum 50% increase in T(1ρ). With Gd, trypsin degradation caused significant reduction in T(1ρ) values up to 60%.

CONCLUSION

The collagen orientation in nasal cartilage can influence T(2) and T(1ρ) MRI of cartilage. Without Gd, T(1ρ) was sensitive to the proteoglycan content and its sensitivity was nearly constant regardless of fibril orientation. In comparison, the T(2) sensitivity to proteoglycan was dependant upon fibril orientation, i.e., more sensitive at 55° than 0°. When Gd ions were present, both T(2) and T(1ρ) became insensitive to the proteoglycan content.