Palyno-morphological investigations of halophytic taxa of Amaranthaceae through SEM from Salt range of Northern Punjab, Pakistan

Plant-Derived Smoke Mitigates the Inhibitory Effects of the Auxin Inhibitor 2,3,5-Triiodo Benzoic Acid (TIBA) by Enhancing Root Architecture and Biochemical Parameters in Maize

The present study was designed to investigate and compare the effects of plant-derived smoke (PDS) and auxin (IAA and IBA) on maize growth under the application of 2,3,5-triiodo benzoic acid (TIBA). For this purpose, indole-3-acetic acid (IAA) and indole-3-butyric acid (IBA), each at a concentration of 10 ppm, along with PDS at a ratio of 1:500 (v/v) were used alone and in combination with 10 ppm of TIBA. The results indicate that the germination percentage (%) of maize seeds was enhanced under IAA, IBA and PDS treatment. However, IAA and IBA resulted in reduced germination when applied in combination with TIBA. Importantly, the germination percentage (%) was improved by PDS under TIBA treatment. The analysis of seedling height, length of leaves, and number of primary, seminal and secondary/lateral roots showed improvement under individual treatments of IAA and IBA, PDS and PDS + TIBA treatment, while these values were reduced under IAA + TIBA and IBA + TIBA application. Chlorophyll content, total soluble sugars and antioxidative enzymatic activity including POD and SOD increased in seedlings treated with PDS alone or both PDS and TIBA, while in seedlings treated with IAA and TIBA or IBA and TIBA, their levels were decreased. APX and CAT responded in the opposite way-under IAA, IBA and PDS treatment, their levels were found to be lower than the control (simple water treatment), while TIBA treatment with either IAA, IBA or PDS enhanced their levels as compared to the control. These results reveal that PDS has the potential to alleviate the inhibitory effects of TIBA. This study highlights the role of PDS in preventing TIBA from blocking the auxin entry sites.

Pollen Micromorphology among Amaranthaceous Species from Desert Rangeland: Exine Stratification and their Taxonomic Significance

The aim of the study was to visualize the micromorphology of Amaranthaceous pollen using scanning electron microscopy collected from the Thal Desert. Field collection was conducted from July to September 2021. A total of 14 taxa of the family Amaranthaceae were collected which belong to nine genera. Achyranthes aspera, Aerva javanica, Aerva lanata, Amaranthus graecizans, Amaranthus retroflexus, Amaranthus viridis, Bassia indica, Chenopodium album, Chenopodium ficifolium, Chenopodium murale, Digera muricata, Haloxylon stocksii, Salsola tragus, and Suaeda fruticosa were studied in terms of pollen morphotypes. Pollen were acetolyzed and observed under optical and scanning microscopy. Qualitative and quantitative characters were measured to analyze the pollen to uncover its taxonomic significance. Qualitative characters observed were the shape of pollen in polar and equatorial views; the most frequent shape observed was spheroidal in the polar view, whereas in the equatorial view, prolate spheroidal was the dominant shape. Exine ornamentation is the key characteristic of pollen which is very helpful, and eight different types of ornamentations were observed in collected taxa: smooth sparsely granulate, scabrate-spinulose, microspinulose perforate, microechinate scabrate to metareticulate, granulate, nanospinulate, granulate-spinulose perforate, granulate-perforate echinate, and microechinate perforate. Periporate-type aperture was observed among all taxa. Mesoporia, ektexinous bodies, and tectum features also show variations among Amaranthaceous grains. In quantitative character, A. retroflexus recorded highest in polar view 26.3 μm and the lowest was of C. album 12.2 μm. Highest P/E index ratio was recorded in S. fruticosa (1.12) whereas the lowest for D. muricta (0.94). Exine thickness was highest in S. tragus 2.15 μm and lowest in A. graecizans 0.78 μm. The maximum number of pores was recorded as 32-36 in D. muricata. Artificial taxonomic keys were constructed based on findings that reinforce the importance of the micromorphological ultrastructural diversity of pollen among Amaranthaceous taxa. It was concluded that the descriptions of pollen morphotypes presented greatly contribute to our understanding of desert species identification.

The old world salsola as a source of valuable secondary metabolites endowed with diverse pharmacological activities: a review

Salsola is an important genus in the plant kingdom with diverse traditional, industrial, and environmental applications. Salsola species are widely distributed in temperate regions and represent about 45% of desert plants. They are a rich source of diverse phytochemical classes, such as alkaloids, cardenolides, triterpenoids, coumarins, flavonoids, isoflavonoids, and phenolic acids. Salsola spp. were traditionally used as antihypertensive, anti-inflammatory, and immunostimulants. They attracted great interest from researchers as several pharmacological activities were reported, including analgesic, antipyretic, antioxidant, cytotoxic, hepatoprotective, contraceptive, antidiabetic, neuroprotective, and antimicrobial activities. Genus Salsola is one of the most notorious plant genera from the taxonomical point of view. Our study represents a comprehensive review of the previous phytochemical and biological research on the old world Salsola secies. It is designed to be a guide for future research on different plant species that still belong to this genus or have been transferred to other genera.

Microscopic (LM and SEM) visualization of pollen ultrastructure among honeybee flora from lower Margalla Hills and allied areas

Microscopic visualization of micro-morphological characters were analyzed using a scanning electron microscopic (SEM) tool, which has proven to be very successful to analyze the pollen surface peculiarities. The significant goal of this research was to perform microscopic examination of pollen of some of the most frequently visited honeybee floral species around apiaries. Micro-morphological characterization of frequented honeybees foraged plants were discussed. A total of 15 species, belonging to 11 different families were identified for the foraging activities of honeybees, namely, Lantana camara, Jatropha integerrima, Helianthus annuus, Tecoma stans, Lagerstroemia indica, Duranta erecta, Cosmos sulphureus, Hymenocollis littoralis, Moringa oleifera, Cestrum nocturnum, Parthenium hysterophorus, Volkameria inermis, Catharanthus roseus, Malvastrum coromandelianum, and Citharexylum spinosum. The microscopic slides were prepared using the acetolysis method, and the qualitative and quantitative features were measured and described using microscopic tools. The pollen type sculpture varies from psilate scabrate to echinate and colpi from tricolpate to tetracolpate. Quantitative parameters such as polar diameter, mesocolpium distance, equatorial dimensions, aperture size, spine diameter, and exine thickness were calculated using IBM SPSS Statistics 20. The exine thickness was measured at its maximum in C. roseus (3.85 μm), whereas it was at its minimum of 0.90 μm in L. indica and D. erecta. Pollen fertility was estimated to be highest in H. annus (88%). The current research validates scanning microscopic features of pollen of the honeybee floral species, which is helpful for the accurate identification and commercializing of honey production to generate revenue for beekeepers through the exploration of bee floral diversity.

Morpho-palynological and anatomical studies in desert cacti (Opuntia dillenii and Opuntia monacantha) using light and scanning electron microscopy

Opuntia is the most diverse and widely distributed drought resistant promising genus of family Cactaceae. The cladodes were utilized to quantify the chemical composition of these plants helpful in lignocellulose conversion and their application towards biofuel production. The present study was aimed to evaluate and compare the taxonomic relationship based on morphology, stem anatomy and palynology of important desert cacti including Opuntia dillenii and Opuntia monacantha. This study also evaluates the potential usefulness of morphological, anatomical and pollen traits using light and scanning electron microscopy. The obtained microcharacters of stem and flowers are considered diagnostic at the generic and specific levels. Some distinguishing morphological features observed were elliptical to obovate cladodes, 1-7 spines per areole and presence of glochidia in O. dillenii. Pollen and stem anatomical characters of the studied taxa are considered highly diagnostic at the generic and species levels. The epidermis has irregular and wavy cells, with straight to sinuate wall pattern and paracytic stomata. Pollen grains appear as pantoporate and prolate spheroidal having reticulate to perforate-reticulate sculpturing while exine semi-tectate to tectate. The taxonomic features studied could be valuable to elaborate and helpful in correctly identification of Opuntia species. The methods of diverse microscopic examination also providing sufficient evidence about the taxonomy of the Opuntia species.

Light and scanning electron microscopic observation of palynological characteristics in spineless Astragalus L. (Fabaceae) and its taxonomic significance

Palynological characterization is considered to be one of the significant taxonomic tools for the delimitation and identification of morphologically complicated taxa. Hence, the pollen morphology of 12 species of spineless Astragalus L. was examined using light and scanning electron microscopy. Studied pollen were small to medium, monad, prolate to per-prolate and tricolporate type in all studied taxa. The exine sculpturing varied from reticulate to microreticulate whereas colpus ornamentation ranged from scabrate to granulate. Furthermore, maximum polar and equatorial diameter was recorded in Astragalus leucocephalus Bunge. (45.00 μm) and A. pyrrhotrichus Boiss. (22.91 μm) while minimum in A. amherstianus Benth. ex Royle (28.75 μm) and A. amherstianus Benth. ex Royle (15.00 μm), respectively. Similarly, the ratio of polar to equatorial diameter was recorded maximum in A. ophiocarpus Boiss. (2.05). The width of colpi was larger in A. hamosus L. (1.29 μm) and smaller in A. ophiocarpus Boiss. (0.62 μm). We have also found the maximum value of mesocolpium in A. retamocarpus Boiss. (2.08 μm) while minimum in A. oxyglottis Steven ex M.Bieb. (1.87 μm). The quantitative pollen attributes helped in the development of pollen keys for the accurate and quick identification of the studied species. Furthermore, ordination and cluster analysis were performed for the differentiation of the investigated taxa at species level. Based on our results, we conclude that pollen features can be used for the delimitation and identification of the studied taxa.

Pollen morphology of selected melliferous plants and its taxonomic implications using microscopy

This research aimed to explore the melliferous bee flora pollen from arid zones of District Attock, Islamabad Capital and Rawalpindi. Morpho-palynological features has provided key information for the classification and help to explain the taxonomy of several genera and species. Therefore, in this work, we examined the morphological characters of pollen potentially to be used for the species delimitation of bee flora. A total of 18 bee floral species, classified into 12 different families were collected, pressed, identified and then acetolyized to observe the grains under microscopy. Bee pollen can be described by small, medium to large sized morphotypes presenting five types of shapes, prolate spheroidal in (seven species), sub-prolate (six species), oblate spheroidal (three species), oblate and prolate (one species each) was examined. The observed polar and equatorial diameter were found maximum in Zea mays 73.5 μm and Pelargonium inquinans 66.75 μm respectively. Pollen of six different types was found namely: tricolporate, 3-zonocolporate, monoportae, tetracolporate, tetraporate and mononsulcate. Whereas highest value of colpi length was measured in Grewia tenax (24.55 μm). Exine surface nature of pollen was examined echinate psilate and scabrate. Exine thickness noted to be maximum in Verbena tenuisecta (8.40 μm) and minimum in Citrus macrocarpa (0.4 μm). Bee floral species considered difficult to identify based on other morphological traits were successfully distinguished using pollen quantitative and qualitative traits, confirming the importance of pollen morphology to diagnose characters to correctly identify honeybee flora.

Palyno-anatomical microscopic characterization of selected species of Boraginaceae and Fabaceae

Palyno-anatomical characterization of some selected species of Boraginaceae and Fabaceae using light microscopy (LM) and scanning electron microscopy (SEM) was conducted. Six species of them belongs to four genera of family Boraginaceae and other six species belongs to four genera of Fabaceae. The current study aimed to investigate palyno-anatomical features for correct identification and taxonomic significance. Pollen grains were acetolyzed and observed both qualitatively and quantitatively through light microscopy and scanning electron microscopy. Statistical data was analyzed through cluster analysis which categorized plants into clusters. Principal component analysis (PCA) was carried out to illustrate morphological variation among selected plant species. Studied plant species showed variation in shape, size, aperture type, exine ornamentation of pollen, size and shape of epidermal cells, types of stomata, guard cells, subsidiary cells and trichome types. Exine thickness was recorded maximum 2.30 ± 0.1 μm in Lablab purpureus and minimum 1.05 ± 0.2 in Gastrocotyle hispida. PCA summarized 73.78% of accumulative variance. Trichome index was observed highest 62% on the adaxial surface of Heliotropium europaeum and lowest 21% on adaxial surface of L. purpureus. These findings reinforce the importance of palyno-anatomical features in the characterization and identification of taxa. It was concluded that description of palyno-anatomical characteristics presented in this study, highly contribute to our knowledge for correct identification of plant species.

Use of scanning electron microscopy to analyze sculpturing pattern and internal features of pollen grain wall in some members of Astragaleae (subfamily: Papilionoidae)

Palynological features of tribe Astagaleae L. have been observed with scanning electron microscopy (SEM), to assess features that can be used to re-examine the placement and taxonomic position of tribe. The palynomorph attributes of 10 species included in three genera of Astragaleae (Astragalus L., Glycyrrhiza L., and Oxytropis DC.) are investigated. The assignment of genus Oxytropis in tribe Astragaleae was also reevaluated based on pollen characters. Pollen appear to be prolate, prolate-spheroidal, and subprolate. Polar axis size (P) varies from 31.3 μm ±1 to 17.5 μm ±1.4 and equatorial axis size (E) varies from 22.2 μm ±1.8 to 13.1 μm ±0.9. Prominent apertures found consistently dispersed along the surface of pollen. Three kinds of ornamentation pattern were recorded, that is, reticulate or reticulate-perforate and perforate. The studied species display variation in equatorial and polar diameter, aperturation and sculpturing pattern, exine thickness, and pollen shape. On the basis of descriptive pollen features, a dichotomous taxonomic key and UPGMA analysis has been made for effortless and quick identification. The study concluded that disparities of the entire features are typically unrelenting and concerned with the species and shows potential systematic significance. The combination of palynological attributes in association with additional traits has prospective for systematic identification at species and genus level.

Implication of scanning electron microscopy as a tool for identification of novel, nonedible oil seeds for biodiesel production

Biodiesel is a promising, bio-based, renewable, nontoxic, environment friendly, and alternative fuel for petroleum derived fuels which helps to reduce dependency on conventional fossil fuels. In this study, six novel, nonedible seed oil producing feedstock were explored for their potential for sustainable production of biodiesel. It is very important to correctly identify oil yielding plant species. Scanning electron microscopy (SEM) was used as reliable tool for authentic identification of oil yielding seeds. Macromorphological characters of seeds were studied with light microscopy (LM). Outcomes of LM of seeds exposed distinctive variation in seed size from 16.3 to 3.2 mm in length and 12.4 to 0.9 mm in width, shape varied from oval to triangular, and color from black to light brown. Oil content of nonedible seed ranged from 25 to 30% (w/w). Free fatty acid content of seed oil varied from 0.32 to 2.5 mg KOH/g. Moreover, ultra structural study of seeds via SEM showed variation in surface sculpturing, cell arrangement, cell shape, periclinal wall shape, margins, protuberances, and anticlinal wall shape. Surface sculpturing varied from rugged, reticulate, varrucose, papillate, and striate. Periclinal wall arrangements confirmed variation from rough, wavy, raised, depressed, smooth, and elevated whereas, anticlinal walls pattern showed variation from profuse undulating, smooth, raised, grooved, deep, curved, and depressed. It was concluded that SEM could be a latent and advanced technique in unveiling hidden micromorphological characters of nonedible oil yielding seeds which delivers valuable information to researchers and indigenous people for precise and authentic identification and recognition.

Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan, KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75-100 (87.5 ± 13.6) μm and 87.5-117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20-22.5 (21 ± 1.36) μm and 22.5-25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.

Implication of light and scanning electron microscopy for pollen morphology of selected taxa of family Asteraceae and Brassicaceae

The present study was intended to assess pollen morphological attributes of selected Asteraceous and Brassicaceous species from tehsil Esa Khel (Mianwali), Punjab using scanning electron microscopy (SEM) and light microscopy (LM) techniques for its systematic and taxonomic significance for correct identification. Pollen from 12 different species belongs to two plant families from various distributional localities were collected, acetolyzed and measured. Different palynomorphological features were investigated using LM and SEM techniques. In Asteraceous species, three types of pollen (tricolporate, trizonocolporate, and tetracolporate) were observed. Pollen shape was observed prolate-spheroidal in three species while oblate and oblate-spheroidal were detected in Parthenium hysterophorus and Erigeron bonariensis. While sculpturing pattern of exine were echinate, echinate fenestrate, echinate perforate and scabrate echinate. Mesocolpium measurement was calculated maximum for Sonchus oleraceous (16.6 μm). Brassicaceae pollen were circular, lobate, tricolpate and exine show reticulate peculiarities. Whereas dominant shape was oblate-spheroidal followed by prolate-spheroidal and sub-prolate in Lepidium didymum and Sisymbrium irio, respectively. Mesocolpium distance was noted highest in Raphanus raphanistrum (14.4 μm). Exine thickness was noted maximum in Erigeron bonariensis (2.9 μm) in Asteraceous species and in Brassicaceae; Lepedium didymum exine measurement was 2.7 μm. The study showed that pollen micromorphology has important role to accurately identify and classify diverse plants genera belong to different families. Based on these taxonomic palynomorph features, the accurate identification of species from flora of tehsil Esa Khel, Mianwali were elaborated.

Micromorphological considerations on Alyssum nezaketiae Aytaç & H. Duman (Brassicaceae), endemic to gypsum habitats from Turkey: An electron microscopic study

Alyssum nezaketiae is a local endemic species in gypsum habitats of Çankırı province in Turkey. In this study, I used field collected specimens of A. nezaketiae in a scanning electron microscopy examination of vegetative and reproductive structures of A. nezaketiae. The objective of the study was to investigate the micromorphological properties that define the species and that represent its adaptation(s) to the extreme environmental conditions posed by gypsum habitats. The epidermis had one to two rows at transverse sections of leaf and stem. Cortex was composed six to eight rows parenchyma cells at stem. A number of adaptations to xeric habitats were observed, including: dense silvery lepidote hairs on leaves and stems, small leaves, stomata on the lower surfaces of the leaves occurring in stomatal crypts, intense lignification in the central cylinder of the stems, and bundles of sclerenchyma in the pith region of stems. These can be interpreted as gypsophytic characteristics associated with physiological drought. Micromorphological properties of plant parts are discussed in relation to environmental conditions and possible constraint factors occurring in these gypsum habitats. Furthermore, these micromorphological studies contribute important taxonomic characters that are needed to help identify a species whose habitat is under threat from a variety of human activities.

Palyno-morphological characterization of selected allergenic taxa of family Poaceae from Islamabad-Pakistan using microscopic techniques

Statistics around the world show an increased risk of high allergies associated with plants. The role of allergenic pollen is now well known. The most serious allergenic diseases are asthma and rhinitis, which affect 5-30% of the population of industrialized countries. This work focuses on the exploration of allergenic grass species of Islamabad, Pakistan and use microscopic techniques to correctly identify them. This study contains 11 species of grasses which showed variations in pollen morphological features. The dominant pollen shape was prolate, prolate-spheroidal and sub oblate. The largest polar diameter was calculated for Echinochloa crus-galli (56.00 μm) while the largest equatorial diameter was found in Cenchrus ciliaris (45.00 μm). Exine ornamentation varied from Gemmate-verrucate, Scabrate-reugulate, Verrucate-reticulate, Gemmate-Scabrate, Fine-Gemmate, Gemmate-rugulate, Gemmate-reticulate, Gemmate-scabrate, Scabrate-verrucate, and Scabrate. Maximum exine thickness was found in Eleusine indica (4.90 μm) while in C. ciliaris (1.50 μm) the minimum thickness of exine was measured. In E. crus-galli (1.54 μm), the largest P to E value was measured and the smallest value was noticed in Setaria verticillata (0.86 μm). The study was performed with an aim to identify the allergenic plant species in Islamabad-Pakistan using pollen morphological studies. This study provides significant information, to arrange the pollen types within their defined classes and to discuss various pollen features for developing an allergenic pollen atlas.

Pollen morphology of family Solanaceae and its taxonomic significance

The pollen micro-morphology of family Solanaceae from the different phytogeographical region of Pakistan has been assessed. In this study, thirteen species belonging to ten genera of Solanaceae have been studied using light and scanning electron microscopy for both qualitative and quantitative features. Solanaceae is a eurypalynous family and a significant variation was observed in pollen size, shape, polarity and exine sculpturing. Examined plant species includes, Brugmansia suaveolens, Capsicum annuum, Cestrum parqui, Datura innoxia, Solanum lycopersicum, Nicotiana plumbaginifolia, Petunia hybrida, Physalis minima, Solanum americanum, Solanum erianthum, Solanum melongena, Solanum surattense and Withania somnifera. The prominent pollen type is tricolporate and shed as a monad. High pollen fertility reflects that observed taxa are well-known in the study area. Based on the observed pollen traits a taxonomic key was developed for the accurate and quick identification of species. Principal Component Analysis was performed that shows some morphological features are the main characters in the identification. Cluster Analysis was performed that separate the plant species in a cluster. The findings highlight the importance of Palyno-morphological features in the characterization and identification of Solanaceous taxa. It is concluded that both LM and SEM significantly play a key role in correct identification of taxa studied.

Pollen morphology and viability of Tillandsia (Bromeliaceae) species by light microscopy and scanning electron microscopy

Tillandsia is the bromeliad genus containing the largest number of species, with wide geographic dispersion and an important ecological role in the ecosystems. Investigations of pollen morphology are important to support taxonomic and conservation studies as well as to choose promising species for cross-pollination to obtain hybrids. The objective of this study was to evaluate the morphology, production, and viability of pollen grains of 24 Tillandsia species that naturally occur in the state of Bahia, Brazil. Pollen grains were acetolized and analyzed by scanning electron microscopy. The pollen were germinated in vitro in two culture media (BM and BKM) and collected at three floral development stages (pre-anthesis, anthesis and post-anthesis). Pollen viability also was analyzed by staining with Alexander's solution and acetocarmine in three floral development stages. Variations in the ornamentation and size of the pollen were observed among the species studied, with the majority having medium size, while T. polystachia and T. juncea had large grains and the subgenera Diaphoranthema and Phytarrhiza had small grains. The pollen of the majority of species had bilateral symmetry, with a single irregularly shaped colpus, semitectate exine and reticulated-heterobrochate surface. The pollen presented high germination percentage, tube length and viability according to the histochemistry, except for T. recurvata, T. usneoides and T. loliacea. The BKM medium and collection of pollen during anthesis produced the best results for the Tillandsia species. The results can support studies of the taxonomy and conservation of these species, which have great environmental importance and high value for ornamental purposes.

Foliar micromorphology and its role in identification of the Apocynaceae taxa

In the present study, we evaluate the importance of foliar epidermal micromorphological characteristics of Apocyanaceae for accurate identification and classification. The species were collected from the University of Peshawar's main campus in the spring season to observe its qualitative and quantitative features. The length and width of guard cells, stomatal pore and subsidiary cells, trichomes, and crypts on both sides of the leaf were examined. Many species were observed to be hypostomatic. Plumeria rubra, Raulfia serpentine, Thevetia peruviana, Trachelospermum lucidum, Alstonia scholaris, and Catharanthus roseus demonstrated hypostomatic leaves. Nearly all the investigated species had anisocytic type of stomata only or in combination with other types of stomata on the upper and lower epidermis. Carissa carandas had anomocytic, anisocytic, and cyclocytic type of stomata on the upper epidermis, and the lower epidermis showed variations in stomatal type, such as anomocytic, stephanocytic, brachyparacytic, and hemiparacytic. Nerium oleander had no specific shape of stomata but showed stomatal crypts in which the stomata were enclosed inside many trichomes. The taxonomic key based on stomatal types, epidermal cells, stomatal index value, and statistical analysis, along with the variations in the epidermal cells, shows the link between the selected plants species, which will provide a baseline for future anatomical studies. This study highlights many undocumented micromorphological characteristics. The anatomical characteristics observed in this study will be helpful for taxonomic identification and species delimitation of the family Apocynaceae.