Scanning electron microscopy leads to identification of novel nonedible oil seeds as energy crops

Comparison of Seed Morphology and Seed Coat Chemistry in Ophrys (Orchidaceae) Species

Orchidaceae is the largest flowering plant family in the world and holds significant importance in terms of biological diversity. Many of the species are found in endemic regions, serving as important indicators for the conservation of biological diversity. Therefore, research on the morphology, seed and embryo structures, chemical composition, and taxonomy of orchids is crucial for species conservation, habitat restoration, and the sustainability of natural habitats. This research involves comparing the morphometric and chemical contents of seeds belonging to certain Ophrys L. species and examining interspecies relationships. The micromorphological features of the seeds were analyzed by using light microscopy and scanning electron microscopy (SEM), while their chemical contents were compared by using Fourier transform infrared spectroscopy (FT-IR) analysis. Seed and embryo morphology, morphometric analysis, and seed coat chemistry hold diagnostic significance. In species of the Ophrys genus, features like anticlinal wall structure and periclinal wall reticulation are considered weak taxonomic characters. FT-IR analysis identifies specific chemical groups in orchid samples, revealing significant differences in absorbance values and chemical compositions among the different orchid species. Particularly, Ophrys lycia (Lycian Kaş Orchid) shows distinct separation from closely related species at peak points such as 2917 and 2850, 1743, 1515, 1240, and 1031 cm-1. Common peak points in the fingerprint region (1200- 700 cm-1) indicate similarity between O. apifera and O. reinholdii subsp. reinholdii. O. ferrum-equinum, O. mammosa subsp. mammosa, O. fusca subsp. leucadica, O. reinholdii subsp. reinholdii, and O. iricolor exhibit similar absorbance values in the range of 1500-1000 cm-1. These results provide valuable preliminary information about the structure of orchid seed coats, reticulation presence and pattern, chemical profiles, distribution, and dormancy-germination processes.

Seed Coat Morphology and Sculpturing of Selected Invasive Alien Plants from Lesser Himalaya Pakistan and Their Systematic Implications

Invasive alien species (IAS) are considered as the second major threat to biodiversity after habitat destruction worldwide. They are aggressive competitors and dominate an ecosystem where they introduce and cause reduction in indigenous diversity. Invasive plants alter the evolutionary pathways of native species by competition, niche displacement, hybridization, introgression, predation, and ultimately extinction of native species. Biological invasion also results in economic and environmental damage and harm to human health. Invasive plants have an effective reproductive as well as dispersal mechanisms. Most invasive plants produce abundant fruits and seeds that are widely disseminated and remain viable in the soil for several years. Invasive plants may change their seed character in order to adapt themselves to the new environment and facilitate their performance. A study on seed coat sculpturing in invasive alien plants collected from Lesser Himalaya region, Pakistan, was conducted using scanning electron microscope to determine the importance of seed morphological characters as an additional tool for identification. Quantitative characters such as seed length and width, macromorphological characters including color, hilum position, and seed shape, and micromorphological characters of seed including surface patterns and periclinal and anticlinal wall of seeds were studied. Findings at the present indicate that most of the seeds were found spherical followed by ovate and elliptical in shape with smooth surface and showed terminal hilum. Almost reticulate seed patterns were observed in seeds. Majority of seeds showed raised anticlinal walls with protuberance periclinal walls. The seeds of Xanthium strumarium were observed with maximum length of 13 mm and with width of 8 mm. Length by width ratio of seeds was also calculated; it was found that maximum L/W ratio was observed in Sonchus oleraceus L., i.e., 2.66. Seed characters, both macro- and micromorphological, furnish useful data for classification and delimitation of invasive taxa. This study will help to understand the invasion mechanism in plants due to variations in seed surface, shape, and other characters. Adaptive behavior of the seed during the invasion process of the new ecosystem is also elaborated.

Implication of scanning electron microscopy as a tool for identification of novel, nonedible oil seeds for biodiesel production

Biodiesel is a promising, bio-based, renewable, nontoxic, environment friendly, and alternative fuel for petroleum derived fuels which helps to reduce dependency on conventional fossil fuels. In this study, six novel, nonedible seed oil producing feedstock were explored for their potential for sustainable production of biodiesel. It is very important to correctly identify oil yielding plant species. Scanning electron microscopy (SEM) was used as reliable tool for authentic identification of oil yielding seeds. Macromorphological characters of seeds were studied with light microscopy (LM). Outcomes of LM of seeds exposed distinctive variation in seed size from 16.3 to 3.2 mm in length and 12.4 to 0.9 mm in width, shape varied from oval to triangular, and color from black to light brown. Oil content of nonedible seed ranged from 25 to 30% (w/w). Free fatty acid content of seed oil varied from 0.32 to 2.5 mg KOH/g. Moreover, ultra structural study of seeds via SEM showed variation in surface sculpturing, cell arrangement, cell shape, periclinal wall shape, margins, protuberances, and anticlinal wall shape. Surface sculpturing varied from rugged, reticulate, varrucose, papillate, and striate. Periclinal wall arrangements confirmed variation from rough, wavy, raised, depressed, smooth, and elevated whereas, anticlinal walls pattern showed variation from profuse undulating, smooth, raised, grooved, deep, curved, and depressed. It was concluded that SEM could be a latent and advanced technique in unveiling hidden micromorphological characters of nonedible oil yielding seeds which delivers valuable information to researchers and indigenous people for precise and authentic identification and recognition.

Scanning electron microscopy as a tool for authentication of biodiesel synthesis from Linum usitatissimum seed oil

Utilization of renewable and alternative energy feedstocks such as nonedible seeds oil to deal with the increasing energy crises and related ecological concerns have gained the attention of researchers. Biodiesel is an efficient and renewable substitute for diesel engine. This work investigates the potential of inexpensive nonedible seed oil of Linum usitatissimum to synthesize biodiesel using iron sulfate green nanocatalyst through the process of transesterification. Flax seed contains about 37.5% oil content estimated through Soxhlet apparatus. Light microscopy revealed that seed size varies from 3.0 to 6.0 cm in length, 2.0 to 3.3 cm in width, and 0.7 to 1.0 mm in diameter. Color of seed varied from yellow to brown. Characterization of biodiesel is performed through GC-MS and FTIR. Scanning electron microscopy was carried out to study the morphological features of seed coat. Catalyst was characterized by scanning electron microscopy, energy diffraction X-ray, and X-ray diffraction. The diffraction peaks of Fe₃ O₄ green nanoparticles were found to be in 2θ values, 30.24°, 35.62°, 38.26°, 49.56°, 57.12°, and 62.78°. Fuel properties of biodiesel are also determined and compared with ASTM standards. Linum usitatissimum biodiesel has density 0.8722 (15°C kg/L), kinetic viscosity 5.45 (40°C cSt), flash point (90°C), pour point (-13°C), cloud point (-9°C), sulfur (0.0432% wt), and total acid number (0.245 mg KOH/g). It is concluded that L. usitatissimum seed oil is a highly potential source for biodiesel production to cope with the challenge of present energy demand.

Microscopic techniques for characterization and authentication of oil-yielding seeds

Investigation of alternative energy sources is need of current time due to growing power crisis and associated environmental issues. Biodiesel is considered as sustainable power source and promising alternative to fossil fuels. Therefore, our current investigation aimed to identify micromorphological characters of 10 novel nonedible oil-yielding seeds through scanning electron microscopy. It was revealed from light microscopic study that there is variation in seed size from 3 to 15 mm in length and 2 to 11 mm in width. Likewise, a huge variation in color was observed such as light green, greenish yellow, blackish brown, and various shades of brown. Presence and absence of Hilum was observed, and compression of seeds varied from depressed, lateral, and dorsoventral. Seed's shape differs from ovate, clavate, triangular ovate, cuneiform, ovoid, and elliptical shape. Seed oil content fall in range of 18-58% (wt/wt). Free fatty acid content of the seeds varies from 0.3 to 3.1 mg KOH/g. Ultrastructure of seeds exhibited huge variation in shape, size, periclinal wall, anticlinal wall, and surface ornamentation. Nonedible seeds varied in wall structure from angular, wavy, dentate entire, irregular, puzzled, elongated, even, and polygonal. The periclinal wall arrangements show alteration from flat, looped, raised, depressed, lofty, even, pentagonal, polygonal, and undulate seed margins. Outcomes of this investigation recommended that scanning electron microscopy could act as a helpful tool in disclosing the hidden micromorphological characters among nonedible oil-yielding seeds and subsequently helping in correct, authentic seed identification and classification as potential feedstock for biodiesel.

Implication of scanning electron microscopy in the seed morphology with special reference to three subfamilies of Fabaceae

The current research work was aimed to determine the morphological variation in the seeds of subfamilies Caesalpinioideae, Mimosoideae, and Papilionoideae using scanning electron microscope to investigate the different seed features including; Seed length, width, weight, hilum shape, position, fracture line pattern, pleurogram shape, texture crudeness, ornamentation wall, and surface ornamentation. A total of 12 species were collected. The study reveals that the seed types alters from psilate to rugose, pleurogram shape from lunar to U shape, hilum shape from elliptical to depressed, hilum position from terminal to subterminal, fracture line pattern from reticulate irregular ridges to psilate with regular ridges, texture crudeness from fine to coarse, surface ornamentation from reticulate to psilate, and ornamentation wall also varies from thin to thick. In all the studied species, it was found that seed surface was brown in color except in Senna alata, in which seed surface was black. Regarding the seed size, it was found that the smallest seed was observed for Sesbania sesban, while the largest seed was observed for Pongamia pinnata. The present research article indicates the taxonomic significance of seed morphology in the subfamilies Caesalpinioideae, Mimosaceae, and Papilionoideae.

Scanning electron microscopy of Sophora alopecuroides L. seeds and their cytotoxic, antimicrobial, antioxidant, and enzyme inhibition potentials

Sophora alopecuroides L. is a highly medicinal plant. The aim of the current study was to determine the phytochemical screening, pharmacological potentials and application of scanning electron microscope (SEM) of S. alopecuroides (SA) seeds. To achieve this purpose, six different solvents were used to prepare SA seed extracts. Phytochemical and antioxidant activities were determined calorimetrically. To investigate the antidiabetic activity, α-amylase inhibition assay was determined. Brine shrimp assay was used to determine cytotoxicity potential. Anti-leishmanial potential was confirmed using MTT assay. Disc-diffusion method was used to detect protein kinase inhibitory, antibacterial and antifungal activities and showed significant results. SEM analysis was used as an identification tool. Considerable amount of phenolic and flavonoid contents were identified in methanol extract (SASM) (93.76 ± 2.71 GAE/mg) and (77 ± 3.60 QE/mg). Highest DPPH scavenging potential (82%) was reported for SASM. Significant total antioxidant capacity (90.60 ± 1.55 alpha amylase enzyme [AAE]/mg) and total reducing power (94.44 ± 1.38 AAE/mg) were determined for LOSM. Highest α-amylase inhibition was reported in SASM (78.20 ± 1.58%). Highest LD₅₀ of brine shrimp was found for n-hexane extract (SASH) 13.03 μg/ml. All extracts showed strong anti-leishmanial activity except SASH. The seeds of SA were seen to be oblong to obovate, projections, wavy slightly straight, anticlinal wall was raised with apex acuminate. In conclusion, our experimental findings highly support the ethnomedicinal and biological potentials of the SA seeds. Moreover, SA seeds need to be explored for identification and isolation of bioactive compounds. In future, we recommend further in vivo toxicity assays and clinical efficacies to further evaluate its different biomedical properties.

Antimicrobial, cytotoxic, antioxidants, enzyme inhibition activities, and scanning electron microscopy of Lactuca orientalis (Boiss.) Boiss. seeds

Lactuca orientalis (Boiss.) Boiss. is one of the most frequently used ethnomedicinal plant. This research study was designed to decipher the phytochemical screening, pharmacological potential and implementation of scanning electron microscope (SEM). Six different solvents were used to prepare L. orientalis (LO) seed extracts. Phytochemical and antioxidant activities were determined calorimetrically. To investigate antidiabetic, α-amylase inhibition assay was performed. Brine shrimp assay was performed for cytotoxicity and anti-leishmanial via MTT assay. Disc-diffusion assay was performed to detect protein kinase inhibitory, antibacterial and antifungal activities. SEM was used as identification tool. Significant amount of phenolic and flavonoid content were identified in methanol extract (LOSM) (95.76 ± 3.71 GAE/mg) and (77 ± 3.60 QE/mg). Highest DPPH scavenging potential (82%) was reported for LOSM. Significant total antioxidant capacity (90.60 ± 1.55 AAE/mg) and total reducing power (94.44 ± 1.38 AAE/mg) were determined for LOSM. Highest α-amylase inhibition was found in LOSM (78.20 ± 1.58%). The highest LD₅₀ of brine shrimp was found for n-Hexane extract (LOSH) 13.03 𝜇g/ml. All extracts showed strong anti-leishmanial activity except LOSH. L. orientalis seeds showed significant protein kinase inhibition, antibacterial and antifungal activities. The seeds of L. orientalis were seen to be oblong to obovate, projections, wavy slightly straight, anticlinal wall was raised with apex acuminate. The outer-periclinal wall convex with fine texture. In conclusion, our findings scientifically support ethnomedicinal and biological potentials of L. orientalis seeds. In future, L. orientalis seeds need to be explored for identification and isolation of bioactive compounds. The results obtained necessitate further in vivo studies to evaluate their pharmacological potentials.

Implication, visualization, and characterization through scanning electron microscopy as a tool to identify nonedible oil seeds

Second-generation biofuels prove to be a distinctive and renewable source of sustainable energy and cleaner environment. The current study focuses on the exploration and identification of four nonedible sources, that is, Brassica oleracea L., Carthamus oxyacantha M.Bieb., Carthamus tinctorius L., and Beaumontia grandiflora Wall., utilizing light microscopy (LM) and scanning electron microscopy (SEM) for studying the detailed micromorphological features of these seeds. LM revealed that size ranges from 3 to 20 mm. furthermore, a great variety of color is observed from pitch black to greenish gray and yellowish white to off white. Seeds ultrastructure study with the help of SEM revealed a great variety in shape, size, color, sculpturing and periclinal wall shape, and so on. Followed by the production of fatty acid methyl esters from a novel source, that is, seeds oil of Brassica oleracea L. (seed oil content 42.20%, FFA content 0.329 mg KOH/g) using triple metal impregnated montmorillonite clay catalyst (Cu-Mg-Zn-Mmt). Catalyst was characterized using SEM-EDX, FT-IR. Maximum yield of Brassica oleracea L. biodiesel (87%) was obtained at the conditions; 1:9 of oil to methanol ratio, 0.5 g of catalyst, 5 hr reaction time, and 90°C of temperature. Synthesized biodiesel was characterized by FT-IR, GC-MS, and NMR. Fuel properties of the Brassica oleracea L. FAMES were determined and found in accordance with ASTM standards.

Identification of novel nonedible oil seeds via scanning electron microscopy for biodiesel production

Exploration of substitute energy feed-stocks is the much-debated topic in the scientific society due to increasing power crises and related ecological concerns. As a source of sustainable energy, biodiesel turns out to be the best alternative to petro fuels. In this context, nonedible oil-producing seeds might be a potential source for biodiesel production owing to their environment-friendly nature and cost-effectiveness. The current study, consequently, deals with the investigation and identification of micro-morphological characters between six novel nonedible oil-bearing seeds employing scanning electron microscopy as possible biodiesel feed-stocks. Light microscopic examinations show that seed size varies from 0.3 to 1.3 cm in width and 0.5 to 1.5 cm in. Additionally, a large difference in seed color ranges from dark brown, black, and various shades of light brown was also witnessed. The FFA content of the seeds ranges in 0.3-4.1 mg KOH/g, and the seed oil content fall in 30-65% (w/w) range. SEM-mediated seed ultrastructure investigations displays greater variation in seed size, shape, color, periclinal wall shape, and sculpturing and so on. All the seeds differ from rounded, ovoid, ovate, oblong, flattened, and elliptical shape. Greater variation in seed wall structure has been seen from angular, entire, irregular, straight, elongated, smooth, and polygonal. The periclinal wall arrangements show alteration from flat, depressed, elevated, smooth, pentagonal, bullate, and coarse seed margins. The results obtained from the current study suggest that scanning electron microscopy could be a beneficial tool in vitalizing the hidden micromorphological characters among various nonedible oil producing seeds, which eventually helps in exploration, correct identification, seed classification, and authentication in future.