Effect of Ni and Al doping on structural, optical, and CO2 gas sensing properties of 1D ZnO nanorods produced by hydrothermal method

The effect of seed layer cycles on the structural, optical, and morphological properties of ZnO nanorods

In this study, ZnO seed layers with different cycles were formed on glass substrates by the sol-gel technique, and ZnO nanorods were grown on them by the hydrothermal method. Morphology and the structural characterization of the seed films and the ZnO nanorods are carried out by field emission scanning electron microscopy (FE-SEM) and x-ray diffraction techniques. In addition, to investigate the effect of seed layer deposition cycles on the optical properties of the ZnO nanorod arrays, UV/visible spectrophotometer and photoluminescence (PL) measurements were performed. The changes in structural and optical parameters such as dislocation density, strain, crystallite size, and optical band gap values on each seed layer deposition cycle were examined. The highest optical band gap and crystallite size were obtained for ZnO nanorods with 4 cycles seed layer as 3.22 eV and 63.6 nm, respectively. Also, in the PL spectrum, the largest ratio of UV-emission region to weak-visible emission region was obtained in ZnO nanorods having 4 cycles. In addition, the glucose detection properties of ZnO nanorods having 4 cycles were investigated using the PL measurements and it was found that UV-emission peak intensity of ZnO nanorods decreased as the glucose concentration increased from 8 to 40 mM. The results show that the number of deposition cycles of the seed layer has a strong influence on the orientation, crystal quality, and optical band gap of the growing ZnO nanorods, as well as significantly affecting their morphological properties. RESEARCH HIGHLIGHTS: High quality ZnO nanorods were grown on glass substrates by hydrothermal method. The effect of ZnO seed layer cycles on the structural, optical, and morphological characteristics of ZnO nanorods grown on were examined. It was found that the number of cycles of the seed layer is a critical parameter for growing quality and well-aligned ZnO nanorods.

Highly Efficient NO2 Sensors Based on Al-ZnOHF under UV Assistance

Zinc hydroxyfluoride (ZnOHF) is a newly found resistive semiconductor used as a gas-sensing material with excellent selectivity to NO2 because of its unique energy band structure. In this paper, Al3+ doping and UV radiation were used to further improve the gas-sensing performance of ZnOHF. The optimized 0.5 at.% Al-ZnOHF sample exhibits improved sensitivity to 10 ppm NO2 at a lower temperature (100 °C) under UV assistance, as well as a short response/recovery time (35 s/96 s). The gas-sensing mechanism demonstrates that Al3+ doping increases electron concentration and promotes electron transfer of the nanorods by reducing the bandgap of ZnOHF, and the photogenerated electrons and holes with high activity under UV irradiation provide new reaction routes in the gas adsorption and desorption process, effectively promoting the gas-sensing process. The synergistic effect of Al3+ and UV radiation contribute to the enhanced performance of Al-ZnOHF.