Performance of teeth of lingcod, Ophiodon elongatus, over ontogeny

Forensic odontology: Assessing bite wounds to determine the role of teeth in piscivorous fishes

Teeth facilitate the acquisition and processing of food in most vertebrates. However, relatively little is known about the functions of the diverse tooth morphologies observed in fishes. Piscivorous fishes (fish-eating fish) are crucial in shaping community structure and rely on their oral teeth to capture and/or process prey. However, how teeth are utilized in capturing and/or processing prey remains unclear. Most studies have determined the function of teeth by assessing morphological traits. The behavior during feeding, however, is seldom quantified. Here, we describe the function of teeth within piscivorous fishes by considering how morphological and behavioral traits interact during prey capture and processing. This was achieved through aquarium-based performance experiments, where prey fish were fed to 12 species of piscivorous fishes. Building on techniques in forensic odontology, we incorporate a novel approach to quantify and categorize bite damage on prey fish that were extracted from the piscivore’s stomachs immediately after being ingested. We then assess the significance of morphological and behavioral traits in determining the extent and severity of damage inflicted on prey fish. Results show that engulfing piscivores capture their prey whole and head-first. Grabbing piscivores capture prey tail-first using their teeth, process them using multiple headshakes and bites, before spitting them out, and then re-capturing prey head-first for ingestion. Prey from engulfers sustained minimal damage, whereas prey from grabbers sustained significant damage to the epaxial musculature. Within grabbers, headshakes were significantly associated with more severe damage categories. Headshaking behavior damages the locomotive muscles of prey, presumably to prevent escape. Compared to non-pharyngognaths, pharyngognath piscivores inflict significantly greater damage to prey. Overall, when present, oral jaw teeth appear to be crucial for both prey capture and processing (immobilization) in piscivorous fishes.

The moment of tooth: rate, fate and pattern of Pacific lingcod dentition revealed by pulse-chase

Tooth replacement rates of polyphyodont cartilaginous and bony fishes are hard to determine because of a lack of obvious patterning and maintaining specimens long enough to observe replacement. Pulse-chase is a fluorescent technique that differentially colours developing mineralized tissue. We present in situ tooth replacement rate and position data for the oral and pharyngeal detentions of Ophiodon elongatus (Pacific lingcod). We assessed over 10 000 teeth, in 20 fish, and found a daily replacement rate of about two teeth (3.6% of the dentition). The average tooth is in the dental battery for 27 days. The replacement was higher in the lower pharyngeal jaw (LPJ). We found no difference between replacement rates of feeding and non-feeding fish, suggesting feeding was not a driver of tooth replacement. Lingcod teeth have both a size and location fate; smaller teeth at one spot will not grow into larger teeth, even if a large tooth nearby is lost. We also found increased rates of replacement at the posterior of the LPJ relative to the anterior. We propose that lingcod teeth do not migrate in the jaw as they develop; their teeth are fated in size and location, erupting in their functional position.

Predator-Prey Interactions Examined Using Lionfish Spine Puncture Performance

Puncture mechanics can be studied in the context of predator-prey interactions and provide bioinspiration for puncture tools and puncture-resistant materials. Lionfish have a passive puncture system where venomous spines (dorsal, anal, and pelvic), the tool, may embed into a predator's skin, the target material, during an encounter. To examine predator-prey interactions, we quantified the puncture performance of red lionfish, Pterois volitans, spines in buccal skin from two potential predators and porcine skin, a biological model for human skin. We punctured dorsal, anal, and pelvic lionfish spines into three regions of buccal skin from the black grouper (Mycteroperca bonaci) and the blacktip shark (Carcharhinus limbatus), and we examined spine macro-damage (visible without a microscope) post puncture. Lionfish spines were more effective, based on lower forces measured and less damage incurred, at puncturing buccal skin of groupers compared to sharks. Anal and dorsal spines incurred the most macro-damage during successful fish skin puncture trials, while pelvic spines did not incur any macro-damage. Lionfish spines were not damaged during porcine skin testing. Anal spines required the highest forces, while pelvic spines required intermediate forces to puncture fish skin. Dorsal spines required the lowest forces to puncture fish skins, but often incurred macro-damage of bent tips. All spine regions required similar forces to puncture porcine skin. These data suggest that lionfish spines may be more effective at puncturing humans such as divers than potential fish predators. These results emphasize that puncture performance is ultimately determined by both the puncture tool and target material choice. Lionfish puncture performance varies among spine region, when taking into account both the puncture force and damage sustained by the spine.

The Evolutionary Continuum of Functional Homodonty to Heterodonty in the Dentition of Halichoeres Wrasses

Vertebrate dentitions are often collapsed into a few discrete categories, obscuring both potentially important functional differences between them and insight into their evolution. The terms homodonty and heterodonty typically conflate tooth morphology with tooth function, and require context-dependent subcategories to take on any specific meaning. Qualifiers like incipient, transient, or phylogenetic homodonty attempt to provide a more rigorous definition but instead highlight the difficulties in categorizing dentitions. To address these issues, we recently proposed a method for quantifying the function of dental batteries based on the estimated stress of each tooth (inferred using surface area) standardized for jaw out-lever (inferred using tooth position). This method reveals a homodonty-heterodonty functional continuum where small and large teeth work together to transmit forces to a prey item. Morphological homodonty or heterodonty refers to morphology, whereas functional homodonty or heterodonty refers to transmission of stress. In this study, we use Halichoeres wrasses to explore how functional continuum can be used in phylogenetic analyses by generating two continuous metrics from the functional homodonty-heterodonty continuum. Here we show that functionally heterodont teeth have evolved at least three times in Halichoeres wrasses. There are more functionally heterodont teeth on upper jaws than on lower jaws, but functionally heterodont teeth on the lower jaws bear significantly more stress. These nuances, which have functional consequences, would be missed by binning entire dentitions into discrete categories. This analysis points out areas worth taking a closer look at from a mechanical and developmental point of view with respect to the distribution and type of heterodonty seen in different jaws and different areas of jaws. These data, on a small group of wrasses, suggest continuous dental variables can be a rich source of insight into the evolution of fish feeding mechanisms across a wider variety of species.

Dermal modifications of the red lionfish, Pterois volitans

Vertebrates have evolved flexible and hard dermal armor, but there is often a tradeoff between mobility and protection. Skeletal modifications include fish scales, the shells of tortoises and turtles, and the cranial projections that are found in marine iguanas and lionfish. Sexual dimorphisms of cranial structures are prominent in fishes; we hypothesized that cranial projections of Pterois volitans will change over ontogeny and are sexually dimorphic. The goal of this study is to quantify differences in the cranial armor of P. volitans over a range of sizes (juveniles to adults) to understand allometric growth and possible sexual dimorphisms using specimens from invaded ranges. We found no difference in the total number of cranial spines between sexes, suggesting that the number of cranial spines is not a sexually dimorphic trait in P. volitans. We found positive allometry for total cranial spine number, and length and width of the three largest cranial spines, with respect to the fish total length. Here, we also document another skeletal modification in P. volitans, which is the addition of spines on the caudal fin. Overall, these data show that P. volitans' develop robust dermal modifications as they grow larger, and we suggest that phenotypic plasticity of this species should be explored in their native and invaded ranges.

Not your father's homodonty-stress, tooth shape, and the functional homodont

Teeth tell the tale of interactions between predator and prey. If a dental battery is made up of teeth that look similar, they are morphologically homodont, but if there is an unspecified amount of regional specialization in size or shape, they are morphologically heterodont. These are vague terms with no useful functional implication because morphological homodonty does not necessarily equal functional homodonty. Teeth that look the same may not function the same. Conical teeth are prevalent in fishes, superficially tasked with the simple job of puncture. There is a great deal of variation in the shape and placement of conical teeth. Anterior teeth may be larger than posterior ones, larger teeth may be surrounded by small ones, and patches of teeth may all have the same size and shape. Such variations suggest that conical dentitions might represent a single morphological solution for different functional problems. We are interested in the concept of homodonty and using the conical tooth as a model to differentiate between tooth shape and performance. We consider the stress that a tooth can exert on prey as stress is what causes damage. To create a statistical measure of functional homodonty, stress was calculated from measurements of surface area, position, and applied force. Functional homodonty is then defined as the degree to which teeth along the jaw all bear/exert similar stresses despite changes in shape. We find that morphologically heterodont teeth are often functionally homodont and that position is a better predictor of performance than shape. Furthermore, the arrangement of teeth affects their function, such that there is a functional advantage to having several smaller teeth surrounding a singular large tooth. We demonstrate that this arrangement of teeth is useful to grab, rather than tear, prey upon puncture, with the smaller teeth dissipating large stress forces around the larger tooth. We show that measurements of how shape affects stress distribution in response to loading give us a clearer picture of the evolution of conically shaped teeth.

Beyond Description: The Many Facets of Dental Biomechanics

Teeth lie at the interface between an animal and its environment and, with some exceptions, act as a major component of resource procurement through food acquisition and processing. Therefore, the shape of a tooth is closely tied to the type of food being eaten. This tight relationship is of use to biologists describing the natural history of species and given the high instance of tooth preservation in the fossil record, is especially useful for paleontologists. However, correlating gross tooth morphology to diet is only part of the story, and much more can be learned through the study of dental biomechanics. We can explore the mechanics of how teeth work, how different shapes evolved, and the underlying forces that constrain tooth shape. This review aims to provide an overview of the research on dental biomechanics, in both mammalian and non-mammalian teeth, and to synthesize two main approaches to dental biomechanics to develop an integrative framework for classifying and evaluating dental functional morphology. This framework relates food material properties to the dynamics of food processing, in particular how teeth transfer energy to food items, and how these mechanical considerations may have shaped the evolution of tooth morphology. We also review advances in technology and new techniques that have allowed more in-depth studies of tooth form and function.

Functional implications of dentition-based morphotypes in piscivorous fishes

Teeth are crucial in elucidating the life history of vertebrates. However, most studies of teeth have focused on mammals. In heterodont mammals, tooth function is based on tooth shape and position along the jaw. However, the vast majority of vertebrates are homodont, and tooth function might not be based on the same principles (in homodonts, tooth shape is broadly similar along the jaw). We provide a quantitative framework and establish dentition-based morphotypes for piscivorous fishes. We then assess how these morphotypes relate to key functional feeding traits. We identified three broad morphotypes: edentulate, villiform and macrodont, with edentulate and villiform species displaying considerable functional overlap; macrodont species are more distinct. When analysing macrodonts exclusively, we found a major axis of variation between 'front-fanged' and 'back-fanged' species. The functional interpretations of this axis suggest that tooth-based functional decoupling could exist, even in homodont vertebrates, where teeth have similar shapes. This diversity is based not only on tooth shape but also solely on the position along the jaw.

Do sharks exhibit heterodonty by tooth position and over ontogeny? A comparison using elliptic Fourier analysis

Tooth morphology is often used to inform the feeding ecology of an organism as these structures are important to procure and process dietary resources. In sharks, differences in morphology may facilitate the capture and handling of prey with different physical properties. However, few studies have investigated differences in tooth morphology over ontogeny, throughout the jaws of a single species, or among species at multiple tooth positions. Bull (Carcharhinus leucas), blacktip (Carcharhinus limbatus), and bonnethead sharks (Sphyrna tiburo) are coastal predators that exhibit ontogenetic dietary shifts, but differ in their feeding ecologies. This study measured tooth morphology at six positions along the upper and lower jaws of each species using elliptic Fourier analysis to make comparisons within and among species over their ontogeny. Significant ontogenetic differences were detected at four of the six tooth positions in bull sharks, but only the posterior position on the lower jaw appeared to exhibit a functionally relevant shift in morphology. No ontogenetic changes in morphology were detected in blacktip or bonnethead sharks. Intraspecific comparisons found that most tooth positions significantly differed from one another across all species, but heterodonty was greatest in bull sharks. Additionally, interspecific comparisons found differences among all species at each tooth position except between bull and blacktip sharks at two positions. These morphological patterns within and among species may have implications for prey handling efficiency, as well as in providing insight for paleoichthyology studies and reevaluating heterodonty in sharks.

Mechanical properties of the venomous spines of Pterois volitans and morphology among lionfish species

The red lionfish, Pterois volitans, an invasive species, has 18 venomous spines: 13 dorsal, 3 anal, and one on each pelvic fin. Fish spines can have several purposes such as defense, intimidation, and for anchoring into crevices. Instead of having hollow spines, lionfish have a tri-lobed cross-sectional shape with grooves that deliver the venom, tapering towards the tip. We aim to quantify the impacts of shape (Second moment of area) and tapering on the mechanical properties of the spine. We performed two-point bending at several positions along the spines of P. volitans to determine mechanical properties (Young's modulus, Elastic energy storage, and Flexural stiffness). The short and recurved anal and pelvic spines are stiffer and resist bending more effectively than the long, dorsal spines. In addition, mechanical properties differ along the length of the spines, most likely because they are tapered. We hypothesize that the highly bendable dorsal spines are used for intimidation, making the fish look larger. The stiffer and energy absorbing anal and pelvic spines are smaller and less numerous, but they may be used for protection since they are located near important internal structures such as the swim bladder. Lastly, spine second moment of area varies across the Pterois genus. These data suggest there may be morphological and mechanical trade-offs among defense, protection, and intimidation of lionfish spines. Overall, the red lionfish venomous spine shape and mechanics may offer protection and intimidate potential predators, significantly contributing to their invasion success.

Teeth penetration force of the tiger shark Galeocerdo cuvier and sandbar shark Carcharhinus plumbeus

This study examined the minimum force required of functional teeth and replacement teeth in the tiger shark Galeocerdo cuvier and the sandbar shark Carcharhinus plumbeus to penetrate the scales and muscle of sheepshead Archosargus probatocephalus and pigfish Orthopristis chrysoptera. Penetration force ranged from 7·7-41·9 and 3·2-26·3 N to penetrate A. probatocephalus and O. chrysoptera, respectively. Replacement teeth required significantly less force to penetrate O. chrysoptera for both shark species, most probably due to microscopic wear of the tooth surfaces supporting the theory shark teeth are replaced regularly to ensure sharp teeth that are efficient for prey capture.

Scaling of dentition and prey size in the California moray (Gymnothorax mordax)

Scaling patterns of tooth morphology can provide insights on prey capture strategy and dietary patterns as species grow through ontogeny. We report the scaling of dentition and diet and how it relates to body size in the California moray, Gymnothorax mordax. We sampled lengths, widths, and curvature for teeth lining five distinct regions of the oral jaws across 21 G. mordax individuals ranging from 383 to 1110mm total length. Absolute tooth length in relation to moray size shows positive allometry only for the outer maxillary teeth, while teeth lining the inner maxilla display positive allometry in tooth base width. All other regions exhibit isometric growth in both length and width relative to moray size. Similar to previous descriptions of other moray species, the longest teeth in the oral jaws are the median intermaxillary teeth. This series of three teeth are depressible and rooted in the center of the ethmovomer, the bone that forms the roof of the rostrum. We hypothesize that caudal mobility of the median intermaxillary teeth aids in prey transport by enabling the pharyngeal jaws to remove pierced prey without requiring full abduction of the oral jaws. The predominantly isometric tooth growth in G. mordax suggests that the oral teeth grow proportionately as individuals increase in size. Stomach contents from the field suggest that G. mordax is highly piscivorous. While a strong positively allometric relationship between vertical gape and head length supports the expectation that moray increase relative prey size over ontogeny, we found no relationship between prey standard length and moray size. This suggests that while larger individuals are capable of consuming larger prey, individual G. mordax are opportunistic predators that do not specialize on prey of a specific size over ontogeny.