A survey of the year 2002 commercial optical biosensor literature

Nested micro-ring refractive index sensor based on a subwavelength grating waveguide and the Vernier effect

In this paper, a nested micro-ring refractive index sensor based on a subwavelength grating waveguide and the Vernier effect is proposed. In this scheme, the nested micro-ring structure is combined with a subwavelength grating structure to enhance the contact area between the optical field and the analyte, and the wavelength offset is doubled through the Vernier effect. The proposed sensor can effectively increase sensing sensitivity, taking into account the improvement of the free spectral range. This structure enables the device to reach a sensitivity of 8030 nm/RIU near 1550 nm wavelength in a deionized water environment, with a detection limit of 5.659×10-5 RIU and free spectral range of 41.956 nm. The device suggested in this study has a greater reduced footprint than the conventional micro-ring resonant sensor, measuring just 35µm×25µm. Due to its high integration, high sensitivity, and large free spectral range compared to conventional micro-ring resonant sensors, such structures are of great value in biosensing and environmental monitoring.

Discovery of small molecules binding to the normal conformation of prion by combining virtual screening and multiple biological activity evaluation methods

Conformational conversion of the normal cellular prion protein, PrP^C, into the misfolded isoform, PrP^Sc, is considered to be a central event in the development of fatal neurodegenerative diseases. Stabilization of prion protein at the normal cellular form (PrP^C) with small molecules is a rational and efficient strategy for treatment of prion related diseases. However, few compounds have been identified as potent prion inhibitors by binding to the normal conformation of prion. In this work, to rational screening of inhibitors capable of stabilizing cellular form of prion protein, multiple approaches combining docking-based virtual screening, steady-state fluorescence quenching, surface plasmon resonance and thioflavin T fluorescence assay were used to discover new compounds interrupting PrP^C to PrP^Sc conversion. Compound 3253-0207 that can bind to PrP^C with micromolar affinity and inhibit prion fibrillation was identified from small molecule databases. Molecular dynamics simulation indicated that compound 3253-0207 can bind to the hotspot residues in the binding pocket composed by β1, β2 and α2, which are significant structure moieties in conversion from PrP^C to PrP^Sc.

On-line identification of fermentation processes for ethanol production

A strategy for monitoring fermentation processes, specifically, simultaneous saccharification and fermentation (SSF) of corn mash, was developed. The strategy covered the development and use of first principles, semimechanistic and unstructured process model based on major kinetic phenomena, along with mass and energy balances. The model was then used as a reference model within an identification procedure capable of running on-line. The on-line identification procedure consists on updating the reference model through the estimation of corrective parameters for certain reaction rates using the most recent process measurements. The strategy makes use of standard laboratory measurements for sugars quantification and in situ temperature and liquid level data. The model, along with the on-line identification procedure, has been tested against real industrial data and have been able to accurately predict the main variables of operational interest, i.e., state variables and its dynamics, and key process indicators. The results demonstrate that the strategy is capable of monitoring, in real time, this complex industrial biomass fermentation. This new tool provides a great support for decision-making and opens a new range of opportunities for industrial optimization.

Measuring Protein-Protein Interactions Using Biacore

The use of optical biosensors for studying macromolecular interactions is gaining increasing popularity. In one study, 1514 papers that involved the application of biosensor data were identified for the year 2009 alone (Rich and Myszka, J Mol Recognit 24:892-914, 2011), the sheer volume and variety of which present a daunting task for the burgeoning biosensor user to accumulate and decipher. This chapter is designed to provide the reader with the tools necessary to prepare, design, and efficiently execute a kinetic experiment on Biacore. It is written to guide the Biacore user through basic theory, system maintenance, and assay setup while also offering some practical tips that we find useful for Biacore-based studies. Many kinetic-based screening assays require rigorous sample preparation and purification prior to analysis. To highlight these procedures, this protocol describes the kinetic characterization of single chain Fv (scFv) antibody fragments from crude bacterial lysates using an antibody affinity capture approach. Even though we specifically describe the capture of HA-tagged scFv antibody fragments to an anti-HA tag monoclonal antibody-immobilized surface prior to kinetic analysis, the same methodologies are universally applicable and can be used for practically any affinity pair and most Biacore systems.

Long-range surface plasmons supported by a bilayer metallic structure for sensing applications

We show, both theoretically and experimentally, that long-range surface plasmons (LRSPs) are supported by asymmetric structure, consisting of a thin silver/gold bilayer metallic film sandwiched between a magnesium fluoride (i.e., MgF₂) buffer layer and a sensing medium (water). The geometrical parameters of the structure are optimized to yield efficient excitation of LRSPs by using transfer matrix method based on Fresnel reflection. The excitation of LRSPs was performed by using a custom-made automated optical setup based on angular interrogation with the precision of 0.01°. We demonstrate that the bimetallic asymmetric structure achieves better minimum reflectivity resolution than monometallic (gold) asymmetric structure. Finally, figures of merit are compared for bimetallic, monometallic, and conventional SPR structures, and we found that the bimetallic asymmetric structure provides a higher figure of merit; e.g., more than double for monometallic LRSP configuration and 8 times as compared to the conventional surface plasmon resonance sensor.

Studying protein-protein interactions using surface plasmon resonance

Protein-protein interactions regulate many important cellular processes, including carbohydrate and lipid metabolism, cell cycle and cell death regulation, protein and nucleic acid metabolism, signal transduction, and cellular architecture. A complete understanding of cellular function depends on full characterization of the complex network of cellular protein-protein interactions, including measurements of their kinetic and binding properties. Surface plasmon resonance (SPR) is one of the commonly used technologies for detailed and quantitative studies of protein-protein interactions and determination of their equilibrium and kinetic parameters. SPR provides excellent instrumentation for a label-free, real-time investigation of protein-protein interactions. This chapter details the experimental design and proper use of the instrumentation for a kinetic experiment. It will provide readers with basic theory, assay setup, and the proper way of reporting this type of results with practical tips useful for SPR-based studies. A generic protocol for immobilizing ligands using amino coupling chemistry, also useful if an antibody affinity capture approach is used, performing kinetic studies, and collecting and analyzing data is described.

Plasmonic biosensors

The unique optical properties of plasmon resonant nanostructures enable exploration of nanoscale environments using relatively simple optical characterization techniques. For this reason, the field of plasmonics continues to garner the attention of the biosensing community. Biosensors based on propagating surface plasmon resonances (SPRs) in films are the most well-recognized plasmonic biosensors, but there is great potential for the new, developing technologies to surpass the robustness and popularity of film-based SPR sensing. This review surveys the current plasmonic biosensor landscape with emphasis on the basic operating principles of each plasmonic sensing technique and the practical considerations when developing a sensing platform with the various techniques. The 'gold standard' film SPR technique is reviewed briefly, but special emphasis is devoted to the up-and-coming localized surface plasmon resonance and plasmonically coupled sensor technology.

Why you should be using more SPR biosensor technology

There are three ways of looking at surface plasmon resonance biosensor technology: bewilderment (I can not believe this sort of technology actually exists), love (without this technology I would cry), or hate (this technology does not work). Whether you love them or hate them, or just have never heard of them, it is time to take a fresh look at how SPR biosensors can help you get from point A to point B in your drug discovery efforts.:

Analysis of affinity of dengue virus protein interaction using Biacore

Surface plasmon resonance (SPR) biosensors have become the mainstream method for biomolecular interaction analysis. It offers many advantages over conventional methods by its label-free, real-time monitoring, low sample consumption, high throughput, and remarkable sensitivity. We have examined dengue virus protein interactions in the context of antibody affinity measurement, protein-protein interaction, and in the screening of small molecule inhibitors as well as the characterization of the interactions between the small molecule binders and the relevant dengue protein. Here we describe the basic methods involved in performing SPR assays as well as in data processing and evaluation using some examples of dengue proteins.

Biosensor-Based Approach to the Identification of Protein Kinase Ligands with Dual-Site Modes of Action

The authors have used a surface plasmon resonance (SPR)–based biosensor approach to identify and characterize compounds with a unique binding mode to protein kinases. Biacore was used to characterize hits from an enzymatic high-throughput screen of the Tec family tyrosine kinase, IL2-inducible T cell kinase (ITK). Complex binding kinetics was observed for some compounds, which led to identification of compounds that bound simultaneously at both the adenosine triphosphate (ATP) binding site and a second, allosteric site on ITK. The presence of the second binding site was confirmed by X-ray crystallography. The second site is located in the N-terminal lobe of the protein kinase catalytic domain, adjacent to but distinct from the ATP site. To enable rapid optimization of binding properties, a competition-based Biacore assay has been developed to successfully identify second site noncompetitive binders that have been confirmed by X-ray crystallographic studies. The authors have found that SPR technology is a key method for rapid identification of compounds with dual-site modes of action.

Measuring protein-protein interactions using Biacore

The use of optical biosensors for studying macromolecular interactions is gaining increasing popularity. In one study, 1,179 papers that involved the application of biosensor data were identified for the year 2007 alone (Rich and Myszka, J Mol Recognit 21:355-400, 2008), the sheer volume and variety of which present a daunting task for the burgeoning biosensor user to accumulate and decipher. This chapter is designed to provide the reader with the tools necessary to prepare, design, and efficiently execute a kinetic experiment on Biacore. It is written to guide the Biacore user through basic theory, system maintenance, and assay set-up while also offering some practical tips that we find useful for Biacore-based studies. Many kinetic-based screening assays require rigorous sample preparation and purification prior to analysis. To highlight these procedures, this protocol describes the kinetic characterisation of single chain Fv (scFv) antibody fragments from crude bacterial lysates using an antibody affinity capture approach. Even though we specifically describe the capture of HA-tagged scFv antibody fragments to an anti-HA tag monoclonal antibody-immobilised surface prior to kinetic analysis, the same methodologies are universally applicable and can be used for practically any affinity pair and most Biacore systems.

Surface plasmon resonance spectroscopy: a new lead in studying the membrane binding of amyloidogenic transthyretin

Surface plasmon resonance (SPR) employs the optical principle of SPR to measure changes in mass on a sensor chip surface in real time. Surface chemistry has been developed which enables the immoblization of lipid bilayers and determination of protein-membrane interactions in real time. In the last decade, the plasma membrane has been demonstrated to play an important role in amyloidogenesis and cytotoxicity induced by amyloidogenic proteins. SPR provides an ideal way to study the membrane binding of amyloidogenic proteins. In this chapter, we describe the application of SPR to the study of amyloidogenic transthyretin binding to the plasma membrane and artificial lipid bilayers.

Surface plasmon resonance biosensorics in urine proteomics

Surface plasmon resonance (SPR) is a novel biophysical detection method. In combination with sophisticated surface chemistries and sensing instrumentations, SPR biosensors are approved as tools for molecular interaction studies. SPR plays also a role in interaction proteomics. Once being detected in urine, SPR helps to unravel the functions of new proteins. Due to its outstanding analytical characteristics, SPR also moves more and more into the realm of quantitative analyses in the clinical laboratory. Complex urine determinations of proteins and/or metabolites will bring the SPR biosensor both to the core lab and to point-of-care-testing.This review delineates first the optical phenomena of SPR near to the gold surface, and also the main features of bioconjugation chemistry on a solid-state surface. Then the kinetic calculation of molecular interaction analysis using SPR is introduced. In order to portray the capability of the method, new applications in urine proteomics and proteinuria diagnostics are finally described in detail.

Synthetic arabinomannan glycolipids and their effects on growth and motility of the Mycobacterium smegmatis

Arabinomannan-containing glycolipids, relevant to the mycobacterial cell-wall component lipoarabinomannan, were synthesized by chemical methods. The glycolipids were presented with tri- and tetrasaccharide arabinomannans as the sugar portion and a double alkyl chain as the lyophilic portion. Following synthesis, systematic biological and biophysical studies were undertaken in order to identify the effects of the glycolipids during mycobacterium growth. The studies included mycobacterial growth, biofilm formation and motility assays. From the studies, it was observed that the synthetic glycolipid with higher arabinan residues inhibited the mycobacterial growth, lessened the biofilm formation and impaired the motility of mycobacteria. A surface plasmon resonance study involving the immobilized glycan surface and the mycobacterial crude lysates as analytes showed specificities of the interactions. Further, it was found that cell lysates from motile bacteria bound oligosaccharide with higher affinity than non-motile bacteria.

The secretions of oviduct epithelial cells increase the equine in vitro fertilization rate: are osteopontin, atrial natriuretic peptide A and oviductin involved?

BACKGROUND

Oviduct epithelial cells (OEC) co-culture promotes in vitro fertilization (IVF) in human, bovine and porcine species, but no data are available from equine species. Yet, despite numerous attempts, equine IVF rates remain low. Our first aim was to verify a beneficial effect of the OEC on equine IVF. In mammals, oviductal proteins have been shown to interact with gametes and play a role in fertilization. Thus, our second aim was to identify the proteins involved in fertilization in the horse.

METHODS & RESULTS

In the first experiment, we co-incubated fresh equine spermatozoa treated with calcium ionophore and in vitro matured equine oocytes with or without porcine OEC. We showed that the presence of OEC increases the IVF rates. In the subsequent experiments, we co-incubated equine gametes with OEC and we showed that the IVF rates were not significantly different between 1) gametes co-incubated with equine vs porcine OEC, 2) intact cumulus-oocyte complexes vs denuded oocytes, 3) OEC previously stimulated with human Chorionic Gonadotropin, Luteinizing Hormone and/or oestradiol vs non stimulated OEC, 4) in vivo vs in vitro matured oocytes. In order to identify the proteins responsible for the positive effect of OEC, we first searched for the presence of the genes encoding oviductin, osteopontin and atrial natriuretic peptide A (ANP A) in the equine genome. We showed that the genes coding for osteopontin and ANP A are present. But the one for oviductin either has become a pseudogene during evolution of horse genome or has been not well annotated in horse genome sequence. We then showed that osteopontin and ANP A proteins are present in the equine oviduct using a surface plasmon resonance biosensor, and we analyzed their expression during oestrus cycle by Western blot. Finally, we co-incubated equine gametes with or without purified osteopontin or synthesized ANP A. No significant effect of osteopontin or ANP A was observed, though osteopontin slightly increased the IVF rates.

CONCLUSION

Our study shows a beneficial effect of homologous and heterologous oviduct cells on equine IVF rates, though the rates remain low. Furthers studies are necessary to identify the proteins involved. We showed that the surface plasmon resonance technique is efficient and powerful to analyze molecular interactions during fertilization.

Reactive surface coatings based on polysilsesquioxanes: controlled functionalization for specific protein immobilization

The key designing in reliable biosensors is the preparation of thin films in which biomolecular functions may be immobilized and addressed in a controlled and reproducible manner. This requires the controlled preparation of specific binding sites on planar surfaces. Poly(methylsilsesquioxane)-poly(pentafluorophenyl acrylates) (PMSSQ-PFPA) are promising materials to produce stable and adherent thin reactive coatings on various substrates. Those reactive surface coatings could be applied onto various materials, for example, gold, polycarbonate (PC), poly(tetrafluoroethylene) (PTFE), and glass. By dipping those substrates in a solution of a desired amine, specific binding sites for protein adsorption could be immobilized on the surface. The versatile strategy allowed the attachment of various linkers, for example, biotin, l-thyroxine, and folic acid. The adsorption processes of streptavidin, pre-albumin, and folate-binding protein were monitored using surface plasmon resonance (SPR), Fourier transform infrared (FTIR) spectroscopy, fluorescence spectroscopy, and atomic force microscopy (AFM). The presented protein immobilization strategy, consisting of four steps (a) spin-coating of PMSSQ-PFPA hybrid polymer from tetrahydrofuran (THF) solution, (b) annealing at 130 degrees C for 2 h to induce thermal cross-linking of the PMSSQ part, (c) surface analogues reaction with different amino-functionalized specific binding sites for proteins, and (d) controlled assembly of proteins on the surface, may find various applications in future biosensor design.

Phenolics: occurrence and immunochemical detection in environment and food

Phenolic compounds may be of natural or anthropogenic origin and be present in the environment as well as in food. They comprise a large and diverse group of compounds that may be either beneficial or harmful for consumers. In this review first a non-exhausting overview of interesting phenolics is given, in particular with regards to their presence in environment and food. For some of these compounds, beneficial, toxicological and/or optionally endocrine disrupting activities will be presented. Further, immunochemical detection and/or isolation methods developed will be discussed, including advantages and disadvantages thereof in comparison with conventional analytical methods such as HPLC, GC, MS. A short overview of new sensor-like methods will also be included for present and future application.

Chemical strategies for generating protein biochips

Protein biochips are at the heart of many medical and bioanalytical applications. Increasing interest has been focused on surface activation and subsequent functionalization strategies for immobilizing these biomolecules. Different approaches using covalent and noncovalent chemistry are reviewed; particular emphasis is placed on the chemical specificity of protein attachment and on retention of protein function. Strategies for creating protein patterns (as opposed to protein arrays) are also outlined. An outlook on promising and challenging future directions for protein biochip research and applications is also offered.

Biosensor-surface plasmon resonance methods for quantitative analysis of biomolecular interactions

The surface plasmon resonance (SPR) biosensor method has emerged as a very flexible and powerful approach for detecting a wide diversity of biomolecular interactions. SPR monitors molecular interactions in real time and provides significant advantages over optical or calorimetric methods for systems with strong binding and low spectroscopic signals or reaction heats. The SPR method simultaneously provides kinetic and equilibrium characterization of the interactions of biomolecules. Such information is essential for development of a full understanding of molecular recognition as well as for areas such as the design of receptor-targeted therapeutics. This article presents basic, practical procedures for conducting SPR experiments. Initial preparation of the SPR instrument, sensor chips, and samples are described. This is followed by suggestions for experimental design, data analysis, and presentation. Steady-state and kinetic studies of some small molecule-DNA complexes are used to illustrate the capability of this technique. Examples of the agreement between biosensor-SPR and solution studies are presented.

Biosensor-surface plasmon resonance: Quantitative analysis of small molecule–nucleic acid interactions

Surface plasmon resonance (SPR)-biosensor techniques directly provide essential information for the study and characterization of small molecule-nucleic acid interactions, and the use of these methods is steadily increasing. The method is label-free and monitors the interactions in real time. Both dynamic and steady-state information can be obtained for a wide range of reaction rates and binding affinities. This article presents the basics of the SPR technique, provides suggestions for experimental design, and illustrates data processing and analysis of results. A specific example of the interaction of a well-known minor groove binding agent, netropsin, with DNA is evaluated by both kinetic and steady-state SPR methods. Three different experiments are used to illustrate different approaches and analysis methods. The three sets of results show the reproducibility of the binding constants and agreement from both steady-state and kinetic analyses. These experiments also show that reliable kinetic information can be obtained, even with difficult systems, if the experimental conditions are optimized to minimize mass transport effects. Limitations of the biosensor-SPR technique are also discussed to provide an awareness of the care needed to conduct a successful experiment.

Quantitative studies of allosteric effects by biointeraction chromatography: analysis of protein binding for low-solubility drugs

A new chromatographic method was developed for characterizing allosteric interactions between an immobilized binding agent and low-solubility compounds. This approach was illustrated by using it to characterize the interactions between tamoxifen and warfarin during their binding to the protein human serum albumin (HSA), with beta-cyclodextrin being employed as a solubilizing agent for these drugs. It was confirmed in this work through several experiments that warfarin had a single binding site on HSA with an association equilibrium constant of (2-5) x 10(5) M(-1) (average, 3.9 x 10(5) M(-1)) at 37 degrees C, in agreement with previous reports. It was also found that tamoxifen had a single major binding site on HSA, with an association equilibrium constant of (3-4) x 10(7) M(-1) (average, 3.5 x 10(7) M(-1)) at 37 degrees C. When warfarin was used as a mobile-phase additive in competition studies with tamoxifen, this had a positive allosteric effect on tamoxifen/HSA binding, giving a coupling constant of 2.3 (+/-0.3). Competitive studies using tamoxifen as a mobile-phase additive indicated that tamoxifen had a negative allosteric effect on warfarin/HSA binding, providing a coupling constant of 0.79 (+/-0.03). A unique feature of the technique described in this report was its ability to independently examine both directions of the warfarin/tamoxifen allosteric interaction. This approach is not limited to warfarin, tamoxifen, and HSA but can also be used to study other solutes and binding agents.

Determining Surface Plasmon Resonance Response Factors for Deposition onto Three-Dimensional Surfaces

Intrinsic sorption rates of ligand/receptor binding have been measured by surface plasmon resonance (SPR) using response factors for deposition of proteins or smaller molecules on planar surfaces. In this study generalized expressions for SPR response factor and effective refractive index are developed to measure rates of analyte sorption onto 3-D surfaces. The expressions are specialized for two limiting cases of immediate practical interest and broad applicability: analyte deposition onto a homogeneous anisotropic porous media and deposition onto close-packed solid spheres adjacent to the sensor surface. These new equations specify media capacity, characteristic size and analyte concentration that are necessary to obtain identifiable responses from interaction with anisotropic porous media or chromatographic resin. These developments are illustrated by comparing response factors for Adenovirus Type 5 on planar surfaces, porous media and adsorptive spheres.

Optical immunosensors for environmental monitoring: How far have we come?

Immunosensing has proved to be a very interesting research area. This review discusses what has actually been achieved in the field of optical immunosensing for environmental screening, and what still needs to be done. The review is presented from a practical point of view. In terms of the basic design of the immunosensor, there is a trend towards decreasing assay time; indeed, this has been reduced from 15-20 minutes to less than 5 minutes. Another goal is to simplify the manifold, and label-free approaches combining indirect assay formats and the detection of antibody binding are popular. Rapid displacement assays have also been investigated thoroughly. In terms of some important features of immunosensing devices, the reusability of the sensing element has been studied in great depth, and working lifetimes of more than five hundred assays can now be found for all assay formats. Multianalyte assays are now being investigated, and current systems are able to monitor 2-3 target compounds, although this number is set to increase greatly (to >30) in the near future. In this sense, an increasing number of publications can be found on microarrays intended for multianalyte determinations. The application of immunosensing to real situations is the main challenge. Immunosensors are barely commercialized and are yet to be established as research or routine tools, due to a lack of validated protocols for a wide range of sample matrices. Regarding compounds considered as analytes, some significant pollutants such as dioxins or pharmaceuticals are rarely chosen as targets, although the current tendency is towards a broader spectrum of analytes. New immunoreagents should be raised for these compounds, for use in immunosensors that can be used as screening tools.

Comparative analysis of 10 small molecules binding to carbonic anhydrase II by different investigators using Biacore technology

In this benchmark study, 26 investigators were asked to characterize the kinetics and affinities of 10 sulfonamide inhibitors binding to the enzyme carbonic anhydrase II using Biacore optical biosensors. A majority of the participants collected data that could be fit to a 1:1 interaction model, but a subset of the data sets obtained from some instruments were of poor quality. The experimental errors in the k(a), k(d), and K(D) parameters determined for each of the compounds averaged 34, 24, and 37%, respectively. As expected, the greatest variation in the reported constants was observed for compounds with exceptionally weak affinity and/or fast association rates. The binding constants determined using the biosensor correlated well with solution-based titration calorimetry measurements. The results of this study provide insight into the challenges, as well as the level of experimental variation, that one would expect to observe when using Biacore technology for small molecule analyses.

Looking towards label-free biomolecular interaction analysis in a high-throughput format: a review of new surface plasmon resonance technologies

Surface plasmon resonance (SPR) biosensors have enabled a wide range of applications in which researchers can monitor biomolecular interactions in real time. Owing to the fact that SPR can provide affinity and kinetic data, unique features in applications ranging from protein-peptide interaction analysis to cellular ligation experiments have been demonstrated. Although SPR has historically been limited by its throughput, new methods are emerging that allow for the simultaneous analysis of many thousands of interactions. When coupled with new protein array technologies, high-throughput SPR methods give users new and improved methods to analyze pathways, screen drug candidates and monitor protein-protein interactions.

Analyzing ligand and small molecule binding activity of solubilized GPCRs using biosensor technology

We used Biacore technology to measure directly the binding of natural ligands and small molecules to the chemokine receptors CXCR4 and CCR5. Both G protein-coupled receptors were solubilized from whole cell pellets and captured on antibody surfaces for analysis. Our solubilization conditions maintained high-affinity binding of chemokines SDF-1alpha and RANTES to CXCR4 and CCR5, respectively. Surface density- and buffer-dependent binding responses, along with binding data for a selective ligand (RCP-168), further validated the biosensor assay. In addition, we showed that it is possible to collect high-quality binding responses for the archetypal small molecule inhibitors JM-2987 and TAK-779. Finally, using our biosensor-based method, we characterized the kinetics of 19 novel small molecule inhibitors of CCR5 and showed that their affinities correlated with values determined for the membrane-associated receptor. Together, the chemokine and small molecule binding data provide evidence that the solubilized receptors maintain native binding properties. These solubilized receptor preparations could be useful reagents for biophysical studies as well as for structural analysis.

Kinetic analysis of a high-affinity antibody/antigen interaction performed by multiple Biacore users

To explore the reliability of Biacore-based assays, 22 study participants measured the binding of prostate-specific antigen (PSA) to a monoclonal antibody (mAb). Each participant was provided with the same reagents and a detailed experimental protocol. The mAb was immobilized on the sensor chip at three different densities and a two-step assay was used to determine the kinetic and affinity parameters of the PSA/mAb complex. First, PSA was tested over a concentration range of 2.5-600 nM to obtain k(a) information. Second, to define the k(d) of this stable antigen/antibody complex accurately, the highest PSA concentration was retested with the dissociation phase of each binding cycle monitored for 1h. All participants collected data that could be analyzed to obtain kinetic parameters for the interaction. The association and the extended-dissociation data derived from the three antibody surfaces were globally fit using a simple 1:1 interaction model. The average k(a) and k(d) for the PSA/mAb interaction as calculated from the 22 analyses were (4.1+/-0.6) x 10(4) M(-1) s(-1) and (4.5+/-0.6) x 10(-5) s(-1), respectively. Overall, the experimental standard errors in the rate constants were only approximately 14%. Based on the kinetic rate constants, the affinity (K(D)) of the PSA/mAb interaction was 1.1+/-0.2 nM.

Substrate-Independent Transduction of Chromophore-Free Organic and Biomolecular Transformations into Color

The concept of synthetic multifunctional pores as substrate-independent optical signal transducers of chemical reactions is introduced with emphasis on the combination with substrate-specific signal generation in biomolecular transformations. Comparison with the general electrochemical transduction, known from conventional biosensors, and the general optical transduction of analyte-specific biomolecular recognition (rather than transformation), known from immunosensing, reveals the fundamental nature of the concept as well as an attractive complementarity to existing methods. Examples with transferases, hydrolases, lyases, and even an isomerase demonstrate that optical transduction with synthetic multifunctional pores is general far beyond the substrate-specific signal generators of electrochemical transduction, that is, the oxidoreductases, and absolutely unproblematic. In part very recent breakthroughs are used to highlight the remarkable promise of synthetic multifunctional pores as optical transducers of biomolecular transformation with regard to practical sensing and screening applications.

Surface plasmon resonance in protein-membrane interactions

Surface plasmon resonance (SPR) has become one of the most important techniques for studying macromolecular interactions. The most obvious advantages of SPR over other techniques are: direct and rapid determination of association and dissociation rates of binding process, no need for labelling of protein or lipids, and small amounts of sample used in the assay (often nM concentrations of proteins). In biochemistry, SPR is used mainly to study protein-protein interactions. On the other hand, protein-membrane interactions, although crucial for many cell processes, are less well studied. Recent advances in the preparation of stable membrane-like surfaces and the commercialisation of sensor chips has enabled widespread use of SPR in protein-membrane interactions. One of the most popular is Biacore's L1 sensor chip that allows capture of intact liposomes or even subcellular preparations. Lipid specificity of protein-membrane interactions can, therefore, be easily studied by manipulating the lipid composition of the immobilised membrane. The number of published papers has increased steadily in the last few years and the examples include domains or proteins that participate in cell signalling, pore-forming proteins, membrane-interacting peptides, coagulation factors, enzymes, amyloidogenic proteins, prions, etc. This paper gives a brief overview of different membrane-mimetic surfaces that can be prepared on the surface of SPR chips, properties of liposomes on the surface of L1 chips and some selected examples of protein-membrane interactions studied with such system.

A surface plasmon resonance-based assay for small molecule inhibitors of human cyclophilin A

A simple protocol for generating a highly stable and active surface plasmon resonance (SPR) sensor surface of recombinant human hexahistidine cyclophilin A (His-CypA) is described. The sensor surface was sensitive and stable enough to allow, for the first time, the screening and ranking of several novel small-molecule (M_r ∼250–500 Da) ligands in a competition binding assay with cyclosporin A (CsA). It also allowed us to accurately determine the kinetic rate constants for the interaction between His-CypA and CsA. His-CypA was first captured on a Ni²⁺–nitrilotriacetic acid (NTA) sensor chip and was then briefly covalently stabilized, coupling via primary amines. The significant baseline drift observed due to dissociation of weakly bound His-CypA from the Ni²⁺–NTA moiety was eliminated, resulting in a surface that was stable for at least 36 h. In addition, immobilized protein activity levels were high, typically between 85 and 95%, assayed by the interaction between His-CypA and CsA. The mean equilibrium dissociation constant for CsA (K_dCsA) binding to the immobilized His-CypA was 23 ± 6 nM, with on and off rates of 0.53 ± 0.1 μM⁻¹ s⁻¹ and 1.2 ± 0.1 (×10⁻²) s⁻¹, respectively. These values agree well with the values for the corresponding binding constants determined from steady-state and kinetic fluorescence titrations in solution.

Adenovirus type 5 intrinsic adsorption rates measured by surface plasmon resonance

Intrinsic adsorption rates of whole adenovirus type 5 (Ad5) onto a diethylaminoethyl (DEAE) anion exchange surface are measured for the first time by surface plasmon resonance (SPR). Fitting SPR sensorgrams to a two-compartment mass transport reaction model distinguishes intrinsic adsorption rates from slow diffusive Ad5 mass transport. Ad5 is a widely used viral vector for gene therapy that binds electrostatically to surfaces of cells and synthetics such as membranes, chromatographic resins, and glass. Increasing NaCl concentration from 4.8 to 14.4mM shifts binding of whole Ad5 from diffusion control to a regime where both sorption and diffusion affect binding. Intrinsic adsorption rates for Ad5-DEAE interaction are 16 times faster than intrinsic adsorption rates for Ad5 fiber knob interacting with soluble extracellular domain of coxsackievirus adenovirus receptors (s-CAR).

Solubilization, stabilization, and purification of chemokine receptors using biosensor technology

Establishing solubilization conditions for membrane-associated receptors is often a tedious empirical process. Here we describe a novel application of SPR biosensor technology to screen solubilization conditions automatically and to assess receptor activity directly. We focus on two chemokine receptors, CXCR4 and CCR5, which are important in HIV cell invasion. The autosampler in Biacore 3000 permitted whole cells expressing C-terminally tagged receptors to be automatically lysed under a given solubilization condition and the lysates to be injected over an antibody surface. The total amount of solubilized receptor could be quantitated from the antibody capture level, whereas the amount of active receptor could be quantitated using a subsequent injection of conformationally sensitive antibody or protein. Using this approach, we identified detergent/lipid/buffer combinations that enhanced and maintained receptor activity. We also used the biosensor to demonstrate CD4-dependent binding of gp120 to solubilized CCR5 and to develop affinity chromatography-based purification methods that increased receptor activity more than 300%. Together, these results illustrate the benefits of using the biosensor as a tool for isolating functional membrane receptors and for analyzing ligand/receptor interactions.

SPR Studies of Carbohydrate-Protein Interactions: Signal Enhancement of Low-Molecular-Mass Analytes by Organoplatinum(II)-Labeling

The relatively insensitive surface plasmon resonance (SPR) signal detection of low-molecular-mass analytes that bind with weak affinity to a protein--for example, carbohydrate-lectin binding--is hampering the use of biosensors in interaction studies. In this investigation, low-molecular-mass carbohydrates have been labeled with an organoplatinum(II) complex of the type [PtCl(NCN-R)]. The attachment of this complex increased the SPR response tremendously and allowed the detection of binding events between monosaccharides and lectins at very low analyte concentrations. The platinum atom inside the organoplatinum(II) complex was shown to be essential for the SPR-signal enhancement. The organoplatinum(II) complex did not influence the specificity of the biological interaction, but both the signal enhancement and the different binding character of labeled compounds when compared with unlabeled ones makes the method unsuitable for the direct calculation of biologically relevant kinetic parameters. However, the labeling procedure is expected to be of high relevance for qualitative binding studies and relative affinity ranking of small molecules (not restricted only to carbohydrates) to receptors, a process of immense interest in pharmaceutical research.

Microplate-based screening methods for the efficient development of sandwich immunoassays

The selection of suitable antibodies is a critical step in immunoassay development, since the final assay performance is predetermined by this decision to a large extent. Particularly, the screening for matching pairs in sandwich immunoassays is difficult, if both antibodies are derived from one species or when monoclonal antibodies are only available as cell supernatants. Several microplate-based approaches for in situ labeling of detection antibodies were tested, in order to avoid time consuming purification of antibodies for enzyme conjugate synthesis. We investigated labeling with anti-species antibodies and Fab fragments thereof, labeling with protein G and biotinylation of cell supernatants without prior purification. Antibodies against peanut proteins were used as a model and signal-to-blank ratios were used in all cases as a measure of the antibody pair performance. Amongst the investigated approaches, preincubation of the detection antibody with labeled anti-species antibody turned out to be most suitable under our conditions. Diagrams, showing the performance of all possible antibody combinations, were generated with this method and were compared to results obtained with covalently labeled detection antibodies. Finally, a flowchart is presented, suggesting an efficient strategy for the development of highly sensitive sandwich immunoassays.

Direct optical detection of protein-ligand interactions

Direct optical detection provides an excellent means to investigate interactions of molecules in biological systems. The dynamic equilibria inherent to these systems can be described in greater detail by recording the kinetics of a biomolecular interaction. Optical biosensors allow direct detection of interaction patterns without the need for labeling. An overview covering several commercially available biosensors is given, with a focus on instruments based on surface plasmon resonance (SPR) and reflectometric interference spectroscopy (RIFS). Potential assay formats and experimental design, appropriate controls, and calibration procedures, especially when handling low molecular weight substances, are discussed. The single steps of an interaction analysis combined with practical tips for evaluation, data processing, and interpretation of kinetic data are described in detail. In a practical example, a step-by-step procedure for the analysis of a low molecular weight compound interaction with serum protein, determined on a commercial SPR sensor, is presented.

Using surface plasmon resonance to directly identify molecules in a tripeptide library that bind tightly to a vancomycin chip

This paper describes a procedure, based on direct binding, for identifying tight-binding ligands for a receptor immobilized on a sensor chip from an array of equimolar tripeptides using surface plasmon resonance. Vancomycin and a library of 96 tripeptides, with molecular weight ranging from 316 to 560 Da, were used as a model system to illustrate the procedure. A consensus structure of the strongest interacting peptides consisted of D-Ala at the C terminus and aromatic amino acid in the penultimate position. Ligands having this structure bound more tightly to vancomycin than the known D-Ala-D-Ala peptide. The throughput of our continuous assay is 96 compounds in 3.3 h, and the sample consumption is less than 2 microg per peptide and 1 ng for vancomycin. This procedure should be applicable to peptide libraries of greater complexity than that used here and to mixtures of small organic compounds.