Structural and functional assessment of trabecular and cortical bone by micro magnetic resonance imaging

Bio-Inspired Micro- and Nano-Scale Surface Features Produced by Femtosecond Laser-Texturing Enhance TiZr-Implant Osseointegration

Surface design plays a critical role in determining the integration of dental implants with bone tissue. Femtosecond laser-texturing has emerged as a breakthrough technology offering excellent uniformity and reproducibility in implant surface features. However, when compared to state-of-the-art sandblasted and acid-etched surfaces, laser-textured surface designs typically underperform in terms of osseointegration. This study investigates the capacity of a bio-inspired femtosecond laser-textured surface design to enhance osseointegration compared to state-of-the-art sandblasted & acid-etched surfaces. Laser-texturing facilitates the production of an organized trabeculae-like microarchitecture with superimposed nano-scale laser-induced periodic surface structures on both 2D and 3D samples of titanium-zirconium-alloy. Following a boiling treatment to modify the surface chemistry, improving wettability to a contact angle of 10°, laser-textured surfaces enhance fibrin network formation when in contact with human whole blood, comparable to state-of-the-art surfaces. In vitro experiments demonstrate that laser-textured surfaces significantly outperform state-of-the-art surfaces with a 2.5-fold higher level of mineralization by bone progenitor cells after 28 days of culture. Furthermore, in vivo evaluations reveal superior biomechanical integration of laser-textured surfaces after 28 days of implantation. Notably, during abiological pull-out tests, laser-textured surfaces exhibit comparable performance, suggesting that the observed enhanced osseointegration is primarily driven by the biological response to the surface.

More accurate trabecular bone imaging using UTE MRI at the resonance frequency of fat

High-resolution magnetic resonance imaging (HR-MRI) has been increasingly used to assess the trabecular bone structure. High susceptibility at the marrow/bone interface may significantly reduce the marrow's apparent transverse relaxation time (T2*), overestimating trabecular bone thickness. Ultrashort echo time MRI (UTE-MRI) can minimize the signal loss caused by susceptibility-induced T2* shortening. However, UTE-MRI is sensitive to chemical shift artifacts, which manifest as spatial blurring and ringing artifacts partially due to non-Cartesian sampling. In this study, we proposed UTE-MRI at the resonance frequency of fat to minimize marrow-related chemical shift artifacts and the overestimation of trabecular thickness. Cubes of trabecular bone from six donors (75 ± 4 years old) were scanned using a 3 T clinical scanner at the resonance frequencies of fat and water, respectively, using 3D UTE sequences with five TEs (0.032, 1.1, 2.2, 3.3, and 4.4 ms) and a clinical 3D gradient echo (GRE) sequence at 0.2 × 0.2 × 0.4 mm3 voxel size. Trabecular bone thickness was measured in 30 regions of interest (ROIs) per sample. MRI results were compared with thicknesses obtained from micro-computed tomography (μCT) at 50 μm3 voxel size. Linear regression models were used to calculate the coefficient of determination between MRI- and μCT-based trabecular thickness. All MRI-based trabecular thicknesses showed significant correlations with μCT measurements. The correlations were higher (examined with paired Student's t-test, P < 0.01) for 3D UTE images performed at the fat frequency (R2 = 0.59-0.74, P < 0.01) than those at the water frequency (R2 = 0.18-0.52, P < 0.01) and clinical GRE images (R2 = 0.39-0.47, P < 0.01). Significantly reduced correlations were observed with longer TEs. This study highlighted the feasibility of UTE-MRI at the fat frequency for a more accurate assessment of trabecular bone thickness.

The unexplored role of alkali and alkaline earth elements (ALAEs) on the structure, processing, and biological effects of bioactive glasses

Bioactive glass has been employed in several medical applications since its inception in 1969. The compositions of these materials have been investigated extensively with emphasis on glass network formers, therapeutic transition metals, and glass network modifiers. Through these experiments, several commercial and experimental compositions have been developed with varying chemical durability, induced physiological responses, and hydroxyapatite forming abilities. In many of these studies, the concentrations of each alkali and alkaline earth element have been altered to monitor changes in structure and biological response. This review aims to discuss the impact of each alkali and alkaline earth element on the structure, processing, and biological effects of bioactive glass. We explore critical questions regarding these elements from both a glass science and biological perspective. Should elements with little biological impact be included? Are alkali free bioactive glasses more promising for greater biological responses? Does this mixed alkali effect show increased degradation rates and should it be employed for optimized dissolution? Each of these questions along with others are evaluated comprehensively and discussed in the final section where guidance for compositional design is provided.

Magnetic resonance imaging for jawbone assessment: a systematic review

PURPOSE

To evaluate the accuracy of magnetic resonance imaging (MRI) for jawbone assessment compared to reference-standard measurements in the literature.

MATERIALS AND METHODS

An electronic database search was conducted in PubMed, EMBASE, Scopus, Web of Science, and the Cochrane Library in June 2022, and updated in August 2023. Studies evaluating the accuracy of MRI for jawbone assessment compared with reference-standard measurements (histology, physical measurements, or computed tomography) were included. The outcome measures included bone histomorphometry and linear measurements. The risk of bias was assessed by the Quality Assessment Tool for Diagnostic Accuracy Studies (QUADAS-2). The review was registered in the PROSPERO database (CRD42022342697).

RESULTS

From 63 studies selected for full-text analysis, nine manuscripts were considered eligible for this review. The studies included assessments of 54 participants, 35 cadavers, and one phantom. A linear measurement error ranging from 0.03 to 3.11 mm was shown. The accuracy of bone histomorphometry varies among studies. Limitations of the evidence included heterogeneity of MRI protocols and the methodology of the included studies.

CONCLUSION

Few studies have suggested the feasibility of MRI for jawbone assessment, as MRI provides comparable results to those of standard reference tests. However, further advancements and optimizations are needed to increase the applicability, validate the efficacy, and establish clinical utility of these methods.

Bone Biomarkers Based on Magnetic Resonance Imaging

Magnetic resonance imaging (MRI) is increasingly used to evaluate the microstructural and compositional properties of bone. MRI-based biomarkers can characterize all major compartments of bone: organic, water, fat, and mineral components. However, with a short apparent spin-spin relaxation time (T2*), bone is invisible to conventional MRI sequences that use long echo times. To address this shortcoming, ultrashort echo time MRI sequences have been developed to provide direct imaging of bone and establish a set of MRI-based biomarkers sensitive to the structural and compositional changes of bone. This review article describes the MRI-based bone biomarkers representing total water, pore water, bound water, fat fraction, macromolecular fraction in the organic matrix, and surrogates for mineral density. MRI-based morphological bone imaging techniques are also briefly described.

Six-minute, in vivo MRI quantification of proximal femur trabecular bone 3D microstructure

BACKGROUND

Assessment of proximal femur trabecular bone microstructure in vivo by magnetic resonance imaging has recently been validated for acquiring information independent of bone mineral density in osteoporotic patients. However, the requisite signal-to-noise ratio (SNR) and resolution for interrogation of the trabecular microstructure at this anatomical location prolongs the scan duration and renders the imaging protocol clinically infeasible. Parallel imaging and compressed sensing (PICS) techniques can reduce the scan duration of the imaging protocol without substantially compromising image quality. The present work investigates the limits of acceleration for a commonly used PICS technique, ℓ1-ESPIRiT, for the purpose of quantifying measures of trabecular bone microarchitecture. Based on a desired error tolerance, a six-minute, prospectively accelerated variant of the imaging protocol was developed and assessed for intersession reproducibility and agreement with the longer reference scan.

PURPOSE

To investigate the limits of acceleration for MRI-based trabecular bone quantification by parallel imaging and compressed sensing reconstruction, and to develop a prototypical imaging protocol for assessing the proximal femur microstructure in a clinically practical scan time.

METHODS

Healthy participants (n = 11) were scanned by a 3D balanced steady-state free precession (bSSFP) sequence satisfying the Nyquist criterion with a scan duration of about 18 min. The raw data were retrospectively undersampled and reconstructed to mimic various acceleration factors ranging from 2 to 6. Trabecular volumes-of-interest in four major femoral regions (greater trochanter, intertrochanteric region, femoral neck, and femoral head) were analyzed and six relevant measures of trabecular bone microarchitecture (bone volume fraction, surface-to-curve ratio, erosion index, elastic modulus, trabecular thickness, plates-to-rods ratio) were obtained for images of all accelerations. To assess agreement, median percent error and intraclass correlation coefficients (ICCs) were computed using the fully-sampled data as reference. Based on this analysis, a prospectively 3-fold accelerated sequence with a duration of about 6 min was developed and the analysis was repeated.

RESULTS

A prospective acceleration factor of 3 demonstrated comparable performance in reproducibility and absolute agreement to the fully-sampled scan. The median CoV over all image-derived metrics was generally <6 % and ICCs >0.70. Also, measurements from prospectively 3-fold accelerated scans demonstrated in general median percent errors of <7 % and ICCs >0.70.

CONCLUSION

The present work proposes a method to make in vivo quantitative assessment of proximal femur trabecular microstructure with a clinically practical scan duration of about 6 min.

Radiomics Texture Analysis of Bone Marrow Alterations in MRI Knee Examinations

Accurate diagnosis and timely intervention are key to addressing common knee conditions effectively. In this work, we aim to identify textural changes in knee lesions based on bone marrow edema (BME), injury (INJ), and osteoarthritis (OST). One hundred and twenty-one MRI knee examinations were selected. Cases were divided into three groups based on radiological findings: forty-one in the BME, thirty-seven in the INJ, and forty-three in the OST groups. From each ROI, eighty-one radiomic descriptors were calculated, encoding texture information. The results suggested differences in the texture characteristics of regions of interest (ROIs) extracted from PD-FSE and STIR sequences. We observed that the ROIs associated with BME exhibited greater local contrast and a wider range of structural diversity compared to the ROIs corresponding to OST. When it comes to STIR sequences, the ROIs related to BME showed higher uniformity in terms of both signal intensity and the variability of local structures compared to the INJ ROIs. A combined radiomic descriptor managed to achieve a high separation ability, with AUC of 0.93 ± 0.02 in the test set. Radiomics analysis may provide a non-invasive and quantitative means to assess the spatial distribution and heterogeneity of bone marrow edema, aiding in its early detection and characterization.

Correlation of bone mineral density using the dual energy x-ray absorptiometry and the magnetic resonance imaging of the lumbar spine in Indian patients

Background

Dual-energy x-ray absorptiometry (DEXA) scan is extensively used to diagnose osteoporosis. But surprisingly, osteoporosis remains an underdiagnosed condition with many fragility fracture patients who have failed to undergo DEXA or received concomitant treatment for osteoporosis. Magnetic resonance imaging (MRI) of the lumbar spine is a routine radiological investigation bring done for low back pain. MRI can detect changes in the bone marrow signal intensity on the standard T1-weighted images. This correlation can be explored to measure osteoporosis in elderly and post-menopausal patients. The present study aims to find any correlation of bone mineral density using the DEXA and MRI of the lumbar spine in Indian patients.

Methods

Five regions of interest (ROI) of size 130-180 mm2 were placed in the vertebral body in the mid-sagittal section and parasagittal sections on either side (four in L1-L4 and one outside body) of elderly patients who underwent MRI for back pain. They also underwent a DEXA scan for osteoporosis. Signal to Noise Ratio (SNR) was calculated by dividing the mean signal intensity obtained for each vertebra by the standard deviation of the noise. Similarly, SNR was measured for 24 controls. An MRI-based "M score" was calculated by getting the difference in SNR patients to SNR controls and then dividing it by the control's standard deviation (SD). Correlation between the T score on DEXA and M scores on MRI was found out.

Results

With the M score greater than or equal to 2.82, the sensitivity was 87.5%, and the specificity was 76.5%. M scores negatively correlated with the T score. With the increase in the T score, the M score decreased. The Spearman correlation coefficient for the spine T score was -0.651, with a p-value of <0.001, and the hip T score was -0.428, with a p-value of 0.013.

Conclusion

Our study indicates that MRI investigations are helpful in Osteoporosis assessments. Even though MRI may not replace DEXA, it can give insight into elderly patients who get an MRI routinely for back pain. It may also have a prognostic value.

Interleaved and simultaneous multi-nuclear magnetic resonance in vivo. Review of principles, applications and potential

Magnetic resonance signals from different nuclei can be excited or received at the same time,rendering simultaneous or rapidly interleaved multi-nuclear acquisitions feasible. The advan-tages are a reduction of total scan time compared to sequential multi-nuclear acquisitions or that additional information from heteronuclear data is obtained at thesame time and anatomical position. Information content can be qualitatively increased by delivering a more comprehensive MR-based picture of a transient state (such as an exercise bout). Also, combiningnon-proton MR acquisitions with 1 Hinformation (e.g., dynamic shim updates and motion correction) can be used to improve data quality during long scans and benefits image coregistration. This work reviews the literature on interleaved and simultaneous multi-nuclear MRI and MRS in vivo. Prominent use cases for this methodology in clinical and research applications are brain and muscle, but studies have also been carried out in other targets, including the lung, knee, breast and heart. Simultaneous multi-nuclear measurements in the liver and kidney have also been performed, but exclusively in rodents. In this review, a consistent nomenclature is proposed, to help clarify the terminology used for this principle throughout the literature on in-vivo MR. An overview covers the basic principles, the technical requirements on the MR scanner and the implementations realised either by MR system vendors or research groups, from the early days until today. Considerations regarding the multi-tuned RF coils required and heteronuclear polarisation interactions are briefly discussed, and fields for future in-vivo applications for interleaved multi-nuclear MR pulse sequences are identified.

Characterizing the Mechanical Behavior of Bone and Bone Surrogates in Compression Using pQCT

Many axial and appendicular skeleton bones are subjected to repetitive loading during daily activities. Until recently, the structural analysis of fractures has been limited to 2D sections, and the dynamic assessment of fracture progression has not been possible. The structural failure was analyzed using step-wise micro-compression combined with time-lapsed micro-computed tomographic imaging. The structural failure was investigated in four different sample materials (two different bone surrogates, lumbar vertebral bodies from bovine and red deer). The samples were loaded in different force steps based on uniaxial compression tests. The micro-tomography images were used to create three-dimensional models from which various parameters were calculated that provide information about the structure and density of the samples. By superimposing two 3D images and calculating the different surfaces, it was possible to precisely analyze which trabeculae failed in which area and under which load. According to the current state of the art, bone mineral density is usually used as a value for bone quality, but the question can be raised as to whether other values such as trabecular structure, damage accumulation, and bone mineralization can predict structural competence better than bone mineral density alone.

MRI-based mechanical competence assessment of bone using micro finite element analysis (micro-FEA): Review

Areal bone mineral density (aBMD) from dual-energy x-ray absorptiometry (DEXA) and volumetric bone mineral density (vBMD) have demonstrated limited capabilities in the evaluation of bone mechanical competence and prediction of bone fracture. Predicting the macroscopic mechanical behavior of the bone structure has been challenging because of the heterogeneous and anisotropic nature of bone, such as the dependencies on loading direction, anatomical location, and sample dimensions. Magnetic resonance imaging (MRI) has been introduced as a promising modality that can be coupled with finite element analysis (FEA) for the assessment of bone mechanical competence. This review article describes studies investigating MRI-based micro-FEA as a potential non-invasive method to predict bone mechanical competence and facilitate bone fracture risk estimation without exposure to ionizing radiation. Specifically, the steps, applications, and future potential of FEA using indirect and direct bone imaging are discussed.

Correlation among alveolar bone assessments provided by CBCT, micro-CT, and 14 T MRI

Objectives:

The aim of this study was to evaluate bone mineral adipose tissue (BMAT) volume in 21 alveolar bone specimens, as determined by 14 T magnetic resonance imaging (MRI), and correlate them to the radiodensity values obtained preoperatively of regions of interest by cone beam computed tomography (CBCT), and to the BV/TV ratio values obtained by micro-CT, the gold-standard for morphometric data collection.

Methods:

Partially edentulous patients were submitted to a CBCT scan, and the radiographic bone densities in each ROI were automatically calculated using coDiagnostiX software. Based on the CBCT surgical planning, a CAD/CAM stereolithographic surgical guide was fabricated to retrieve a bone biopsy from the same ROIs scanned preoperatively, and then to orientate the subsequent implant placement. The alveolar bone biopsies were then collected and scanned using the micro-CT and 14 T MRI techniques. Pearson’s correlation test was performed to correlate the results obtained using the three different techniques.

Results:

In the 21 eligible bone specimens (6 females, 15 males), age (mean age 52.9 years), micro-CT, and 14 T MRI variables were found to be normally distributed (p > 0.05). The strongest—and only statistically significant (p < 0.05)—correlation was found between micro-CT and 14 T MRI values (r = 0.943), and the weakest, between 14 T MRI and CBCT values (r = –0.068).

Conclusions:

The findings suggest that 14 T MRI can be used to evaluate BMAT as an indirect marker for bone volume, and that CBCT is not a reliable technique to provide accurate bone density values.

Generation of Vertebra Micro-CT-like Image from MDCT: A Deep-Learning-Based Image Enhancement Approach

This paper proposes a deep-learning-based image enhancement approach that can generate high-resolution micro-CT-like images from multidetector computed tomography (MDCT). A total of 12,500 MDCT and micro-CT image pairs were obtained from 25 vertebral specimens. Then, a pix2pixHD model was trained and evaluated using the structural similarity index measure (SSIM) and Fréchet inception distance (FID). We performed subjective assessments of the micro-CT-like images based on five aspects. Micro-CT and micro-CT-like image-derived trabecular bone microstructures were compared, and the underlying correlations were analyzed. The results showed that the pix2pixHD method (SSIM, 0.804 ± 0.037 and FID, 43.598 ± 9.108) outperformed the two control methods (pix2pix and CRN) in enhancing MDCT images (p < 0.05). According to the subjective assessment, the pix2pixHD-derived micro-CT-like images showed no significant difference from the micro-CT images in terms of contrast and shadow (p > 0.05) but demonstrated slightly lower noise, sharpness and trabecular bone texture (p < 0.05). Compared with the trabecular microstructure parameters of micro-CT images, those of pix2pixHD-derived micro-CT-like images showed no significant differences in bone volume fraction (BV/TV) (p > 0.05) and significant correlations in trabecular thickness (Tb.Th) and trabecular spacing (Tb.Sp) (Tb.Th, R = 0.90, p < 0.05; Tb.Sp, R = 0.88, p < 0.05). The proposed method can enhance the resolution of MDCT and obtain micro-CT-like images, which may provide new diagnostic criteria and a predictive basis for osteoporosis and related fractures.

Changes in bone microarchitecture following parathyroidectomy in patients with secondary hyperparathyroidism

Background

Secondary hyperparathyroidism (SHPT) in patients with chronic kidney disease (CKD) has a significant effect on bone, affecting both trabecular and cortical compartments. Although parathyroidectomy results in biochemical improvement in mineral metabolism, changes in bone microarchitecture as evaluated by high-resolution imaging modalities are not known. Magnetic resonance imaging (MRI) provides in-depth three-dimensional assessment of bone microarchitecture, as well as determination of mechanical bone strength determined by finite element analysis (FEA).

Methods

We conducted a single-centre longitudinal study to evaluate changes in bone microarchitecture with MRI in patients with SHPT undergoing parathyroidectomy. MRI was performed at the distal tibia at baseline (time of parathyroidectomy) and at least 12 months following surgery. Trabecular and cortical topological parameters as well as bone mechanical competence using FEA were assessed.

Results

Fifteen patients with CKD (12 male, 3 female) underwent both MRI scans at the time of surgery and at least 12 months post-surgery. At baseline, 13 patients were on dialysis, one had a functioning kidney transplant, and one was pre-dialysis with stage 5 CKD. Seven patients received a kidney transplant following parathyroidectomy prior to follow-up MRI. MRI parameters in patients at follow up were consistent with loss in trabecular and cortical bone thickness (p = 0.006 and 0.03 respectively). Patients who underwent a kidney transplant in the follow-up period had reduction in trabecular thickness (p = 0.05), whereas those who continued on dialysis had reduction in cortical thickness (p = 0.04) and mechanical bone strength on FEA (p = 0.03).

Conclusion

Patients with severe SHPT requiring parathyroidectomy have persistent changes in bone microarchitecture at least 12 months following surgery with evidence of ongoing decline in trabecular and cortical thickness.

Effects of Therapy with Fibrin Glue combined with Mesenchymal Stem Cells (MSCs) on Bone Regeneration: A Systematic Review

Cell therapy strategies using mesenchymal stem cells (MSCs) carried in fibrin glue have shown promising results in regenerative medicine. MSCs are crucial for tissue healing because they have angiogenic, anti-apoptotic and immunomodulatory properties, in addition to the ability to differentiate into several specialized cell lines. Fibrin sealant or fibrin glue is a natural polymer involved in the coagulation process. Fibrin glue provides a temporary structure that favors angiogenesis, extracellular matrix deposition and cell-matrix interactions. Additionally, fibrin glue maintains the local and paracrine functions of MSCs, providing tissue regeneration through less invasive clinical procedures. Thus, the objective of this systematic review was to assess the potential of fibrin glue combined with MSCs in bone or cartilage regeneration. The bibliographic search was performed in the PubMed/MEDLINE, LILACS and Embase databases, using the descriptors (“fibrin sealant” OR “fibrin glue”) AND “stem cells” AND “bone regeneration”, considering articles published until 2021. In this case, 12 preclinical and five clinical studies were selected to compose this review, according to the eligibility criteria. In preclinical studies, fibrin glue loaded with MSCs, alone or associated with bone substitute, significantly favored bone defects regeneration compared to scaffold without cells. Similarly, fibrin glue loaded with MSCs presented considerable potential to regenerate joint cartilage injuries and multiple bone fractures, with significant improvement in clinical parameters and absence of postoperative complications. Therefore, there is clear evidence in the literature that fibrin glue loaded with MSCs, alone or combined with bone substitute, is a promising strategy for treating lesions in bone or cartilaginous tissue.

Effects of Sex and Age on Fat Fraction, Diffusion-Weighted Image Signal Intensity and Apparent Diffusion Coefficient in the Bone Marrow of Asymptomatic Individuals: A Cross-Sectional Whole-Body MRI Study

We aimed to describe the relationships between the relative fat fraction (%FF), muscle-normalized diffusion-weighted (DW) image signal intensity and water apparent diffusion coefficient (ADC), sex and age for normal bone marrow, in the normal population. Our retrospective cohort consisted of 100 asymptomatic individuals, equally divided by sex and 10-year age groups, who underwent whole-body MRI at 1.5 T for early cancer detection. Semi-automated segmentation of global bone marrow volume was performed using the DW images and the resulting segmentation masks were projected onto the ADC and %FF maps for extraction of parameter values. Differences in the parameter values between sexes at age ranges were assessed using the Mann–Whitney and Kruskal–Wallis tests. The Spearman correlation coefficient r was used to assess the relationship of each imaging parameter with age, and of %FF with ADC and normalized DW signal intensity values. The average %FF of normal bone marrow was 65.6 ± 7.2%, while nSI_b50, nSI_b900 and ADC were 1.7 ± 0.5, 3.2 ± 0.9 and 422 ± 67 μm²/s, respectively. The bone marrow %FF values increased with age in both sexes (r = 0.63 and r = 0.64, respectively, p < 0.001). Values of nSI_b50 and nSI_b900 were higher in younger women compared to men of the same age groups (p < 0.017), but this difference decreased with age. In our cohort of asymptomatic individuals, the values of bone marrow relative %FF, normalized DW image signal intensity and ADC indicate higher cellularity in premenopausal women, with increasing bone marrow fat with aging in both sexes.

Bone physiological microenvironment and healing mechanism: Basis for future bone-tissue engineering scaffolds

Bone-tissue defects affect millions of people worldwide. Despite being common treatment approaches, autologous and allogeneic bone grafting have not achieved the ideal therapeutic effect. This has prompted researchers to explore novel bone-regeneration methods. In recent decades, the development of bone tissue engineering (BTE) scaffolds has been leading the forefront of this field. As researchers have provided deep insights into bone physiology and the bone-healing mechanism, various biomimicking and bioinspired BTE scaffolds have been reported. Now it is necessary to review the progress of natural bone physiology and bone healing mechanism, which will provide more valuable enlightenments for researchers in this field. This work details the physiological microenvironment of the natural bone tissue, bone-healing process, and various biomolecules involved therein. Next, according to the bone physiological microenvironment and the delivery of bioactive factors based on the bone-healing mechanism, it elaborates the biomimetic design of a scaffold, highlighting the designing of BTE scaffolds according to bone biology and providing the rationale for designing next-generation BTE scaffolds that conform to natural bone healing and regeneration.

The Role of Bone Biopsy in the Management of CKD-MBD

A bone biopsy is still considered the gold standard for diagnosis of renal osteodystrophy. It allows to measure both static and dynamic parameters of bone remodeling and is the only method able to evaluate mineralization and allows analysis of both cortical and trabecular bone. Although bone volume can be measured indirectly by dual-energy X-ray absorptiometry, mineralization defects, bone metal deposits, cellular number/activity, and even turnover abnormalities are difficult to determine by techniques other than qualitative bone histomorphometry. In this review, we evaluate the role of bone biopsy in the clinical practice.

Survey of MRI Usefulness for the Clinical Assessment of Bone Microstructure

Bone microarchitecture has been shown to provide useful information regarding the evaluation of skeleton quality with an added value to areal bone mineral density, which can be used for the diagnosis of several bone diseases. Bone mineral density estimated from dual-energy X-ray absorptiometry (DXA) has shown to be a limited tool to identify patients' risk stratification and therapy delivery. Magnetic resonance imaging (MRI) has been proposed as another technique to assess bone quality and fracture risk by evaluating the bone structure and microarchitecture. To date, MRI is the only completely non-invasive and non-ionizing imaging modality that can assess both cortical and trabecular bone in vivo. In this review article, we reported a survey regarding the clinically relevant information MRI could provide for the assessment of the inner trabecular morphology of different bone segments. The last section will be devoted to the upcoming MRI applications (MR spectroscopy and chemical shift encoding MRI, solid state MRI and quantitative susceptibility mapping), which could provide additional biomarkers for the assessment of bone microarchitecture.

Bone Structure Analysis of the Radius Using Ultrahigh Field (7T) MRI: Relevance of Technical Parameters and Comparison with 3T MRI and Radiography

Bone fractal signature analysis (FSA-also termed bone texture analysis) is a tool that assesses structural changes that may relate to clinical outcomes and functions. Our aim was to compare bone texture analysis of the distal radius in patients and volunteers using radiography and 3T and 7T magnetic resonance imaging (MRI)-a patient group (n = 25) and a volunteer group (n = 25) were included. Participants in the patient group had a history of chronic wrist pain with suspected or confirmed osteoarthritis and/or ligament instability. All participants had 3T and 7T MRI including T1-weighted turbo spin echo (TSE) sequences. The 7T MRI examination included an additional high-resolution (HR) T1 TSE sequence. Radiographs of the wrist were acquired for the patient group. When comparing patients and volunteers (unadjusted for gender and age), we found a statistically significant difference of horizontal and vertical fractal dimensions (FDs) using 7T T1 TSE-HR images in low-resolution mode (horizontal: p = 0.04, vertical: p = 0.01). When comparing radiography to the different MRI sequences, we found a statistically significant difference for low- and high-resolution horizontal FDs between radiography and 3T T1 TSE and 7T T1 TSE-HR. Vertical FDs were significantly different only between radiographs and 3T T1 TSE in the high-resolution mode; FSA measures obtained from 3T and 7T MRI are highly dependent on the sequence and reconstruction resolution used, and thus are not easily comparable between MRI systems and applied sequences.

Total-Body PET Imaging of Musculoskeletal Disorders

Imaging of musculoskeletal disorders, including arthritis, infection, osteoporosis, sarcopenia, and malignancies, is often limited when using conventional modalities such as radiography, computed tomography (CT), and MR imaging. As a result of recent advances in Positron Emission Tomography (PET) instrumentation, total-body PET/CT offers a longer axial field-of-view, higher geometric sensitivity, and higher spatial resolution compared with standard PET systems. This article discusses the potential applications of total-body PET/CT imaging in the assessment of musculoskeletal disorders.

Quantitative Ultrashort Echo Time (UTE) Magnetic Resonance Imaging of Bone: An Update

Bone possesses a highly complex hierarchical structure comprised of mineral (~45% by volume), organic matrix (~35%) and water (~20%). Water exists in bone in two forms: as bound water (BW), which is bound to bone mineral and organic matrix, or as pore water (PW), which resides in Haversian canals as well as in lacunae and canaliculi. Magnetic resonance (MR) imaging has been increasingly used for assessment of cortical and trabecular bone. However, bone appears as a signal void on conventional MR sequences because of its short T2*. Ultrashort echo time (UTE) sequences with echo times (TEs) 100-1,000 times shorter than those of conventional sequences allow direct imaging of BW and PW in bone. A series of quantitative UTE MRI techniques has been developed for bone evaluation. UTE and adiabatic inversion recovery prepared UTE (IR-UTE) sequences have been developed to quantify BW and PW. UTE magnetization transfer (UTE-MT) sequences have been developed to quantify collagen backbone protons, and UTE quantitative susceptibility mapping (UTE-QSM) sequences have been developed to assess bone mineral.

Quantitative Magnetic Resonance Imaging of Cortical and Trabecular Bone

Bone is a composite material consisting of mineral, organic matrix, and water. Water in bone can be categorized as bound water (BW), which is bound to bone mineral and organic matrix, or as pore water (PW), which resides in Haversian canals as well as in lacunae and canaliculi. Bone is generally classified into two types: cortical bone and trabecular bone. Cortical bone is much denser than trabecular bone that is surrounded by marrow and fat. Magnetic resonance (MR) imaging has been increasingly used for noninvasive assessment of both cortical bone and trabecular bone. Bone typically appears as a signal void with conventional MR sequences because of its short T2*. Ultrashort echo time (UTE) sequences with echo times 100 to 1,000 times shorter than those of conventional sequences allow direct imaging of BW and PW in bone. This article summarizes several quantitative MR techniques recently developed for bone evaluation. Specifically, we discuss the use of UTE and adiabatic inversion recovery prepared UTE sequences to quantify BW and PW, UTE magnetization transfer sequences to quantify collagen backbone protons, UTE quantitative susceptibility mapping sequences to assess bone mineral, and conventional sequences for high-resolution imaging of PW as well as the evaluation of trabecular bone architecture.

Bone microarchitecture in patients undergoing parathyroidectomy for management of secondary hyperparathyroidism

Background

Secondary hyperparathyroidism (SHPT) in patients with chronic kidney disease (CKD) leads to complex bone disease, affecting both trabecular and cortical bone, and increased fracture risk. Optimal assessment of bone in patients with CKD is yet to be determined. High-resolution magnetic resonance imaging (MRI) can provide three-dimensional assessment of bone microarchitecture, as well as determination of mechanical strength with finite element analysis (FEA).

Methods

We conducted a single-centre, cross-sectional study to determine bone microarchitecture with MRI in CKD patients with SHPT undergoing parathyroidectomy. Within two weeks of surgery, MRI was performed at the distal tibia and biochemical markers of SHPT (parathyroid hormone [PTH] and alkaline phosphatase [ALP]) were collected. Trabecular and cortical topological parameters as well as bone mechanical competence using FEA were assessed. Correlation of MRI findings of bone was made with biochemical markers.

Results

Twenty patients with CKD (15 male, 5 female) underwent MRI at the time of parathyroidectomy (16 on dialysis, 3 with functioning kidney transplant, one pre-dialysis with CKD stage 5). Median PTH at the time of surgery was 138.5 pmol/L [39.6–186.7 pmol/L]. MRI parameters in patients were consistent with trabecular deterioration, with erosion index (EI) 1.01 ± 0.3, and trabecular bone volume (BV/TV) 10.8 ± 2.9%, as well as poor trabecular network integrity with surface-to-curve ratio (S/C) 5.4 ± 2.3. There was also evidence of reduced cortical thickness, with CTh 2.698 ± 0.630 mm, and FEA demonstrated overall poor bone mechanical strength with mean elastic modulus of 2.07 ± 0.44.

Conclusion

Patients with severe SHPT requiring parathyroidectomy have evidence of significant changes in bone microarchitecture with trabecular deterioration, low trabecular and cortical bone volume, and reduced mechanical competence of bone.

Trabecular bone imaging using a 3D adiabatic inversion recovery prepared ultrashort TE Cones sequence at 3T

PURPOSE

To investigate direct imaging of trabecular bone using a 3D adiabatic inversion recovery prepared ultrashort TE cones (3D IR-UTE-Cones) sequence.

METHODS

The proposed 3D IR-UTE-Cones sequence used a broadband adiabatic inversion pulse together with a short TR/TI combination to suppress signals from long T2 tissues such as muscle and marrow fat, followed by multispoke UTE acquisition to detect signal from short T2 water components in trabecular bone. The feasibility of this technique for robust suppression of long T2 tissues was first demonstrated through numerical simulations. The proposed IR-UTE-Cones sequence was applied to a hip agarose bone phantom and to 6 healthy volunteers for morphologic and quantitative T 2 ∗ and proton density mapping of trabecular bone.

RESULTS

Numeric simulation suggests that the IR technique with a short TR/TI combination provides sufficient suppression of long T2 tissues with a wide range of T1 s. High contrast imaging of trabecular bone can be achieved ex vivo and in vivo, with fitted T 2 ∗ values of 0.3-0.45 ms and proton densities of 5-9 mol/L.

CONCLUSION

The 3D IR-UTE-Cones sequence with a short TR/TI combination provides robust suppression of long T2 tissues and allows both selective imaging and quantitative ( T 2 ∗ and proton density) assessment of short T2 water components in trabecular bone in vivo.

Diffusion MRI for Assessment of Bone Quality; A Review of Findings in Healthy Aging and Osteoporosis

Diffusion MRI (dMRI) is a growing imaging technique with the potential to provide biomarkers of tissue variation, such as cellular density, tissue anisotropy, and microvascular perfusion. However, the role of dMRI in characterizing different aspects of bone quality, especially in aging and osteoporosis, has not yet been fully established, particularly in clinical applications. The reason lies in the complications accompanied with implementation of dMRI in assessment of human bone structure, in terms of acquisition and quantification. Bone is a composite tissue comprising different elements, each contributing to the overall quality and functional competence of bone. As diffusion is a critical biophysical process in biological tissues, early changes of tissue microstructure and function can affect diffusive properties of the tissue. While there are multiple MRI methods to detect variations of individual properties of bone quality due to aging and osteoporosis, dMRI has potential to serve as a superior method for characterizing different aspects of bone quality within the same framework but with higher sensitivity to early alterations. This is mainly because several properties of the tissue including directionality and anisotropy of trabecular bone and cell density can be collected using only dMRI. In this review article, we first describe components of human bone that can be potentially detected by their diffusivity properties and contribute to variations in bone quality during aging and osteoporosis. Then we discuss considerations and challenges of dMRI in bone imaging, current status, and suggestions for development of dMRI in research studies and clinics to segregate different contributing components of bone quality in an integrated acquisition. Level of Evidence: 5 Technical Efficacy Stage: 2 J. Magn. Reson. Imaging 2020;51:975-992.

An Update in Qualitative Imaging of Bone Using Ultrashort Echo Time Magnetic Resonance

Bone is comprised of mineral, collagenous organic matrix, and water. X-ray-based techniques are the standard approach for bone evaluation in clinics, but they are unable to detect the organic matrix and water components in bone. Magnetic resonance imaging (MRI) is being used increasingly for bone evaluation. While MRI can non-invasively assess the proton pools in soft tissues, cortical bone typically appears as a signal void with clinical MR techniques because of its short T2*. New MRI techniques have been recently developed to image bone while avoiding the ionizing radiation present in x-ray-based methods. Qualitative bone imaging can be achieved using ultrashort echo time (UTE), single inversion recovery UTE (IR-UTE), dual-inversion recovery UTE (Dual-IR-UTE), double-inversion recovery UTE (Double-IR-UTE), and zero echo time (ZTE) sequences. The contrast mechanisms as well as the advantages and disadvantages of each technique are discussed.

Biomarkers of Osteoporosis: An Update

Background:

Osteoporosis, characterized by compromised bone quality and strength is associated with bone fragility and fracture risk. Biomarkers are crucial for the diagnosis or prognosis of a disease as well as elucidating the mechanism of drug action and improve decision making.

Objective:

An exhaustive description of traditional markers including bone mineral density, vitamin D, alkaline phosphatase, along with potential markers such as microarchitectural determination, trabecular bone score, osteocalcin, etc. is provided in the current piece of work. This review provides insight into novel pathways such as the Wnt signaling pathway, neuro-osseous control, adipogenic hormonal imbalance, gut-bone axis, genetic markers and the role of inflammation that has been recently implicated in osteoporosis.

Methods:

We extensively reviewed articles from the following databases: PubMed, Medline and Science direct. The primary search was conducted using a combination of the following keywords: osteoporosis, bone, biomarkers, bone turnover markers, diagnosis, density, architecture, genetics, inflammation.

Conclusion:

Early diagnosis and intervention delay the development of disease and improve treatment outcome. Therefore, probing for novel biomarkers that are able to recognize people at high risk for developing osteoporosis is an effective way to improve the quality of life of patients and to understand the pathomechanism of the disease in a better way.

Micro-scale assessment of the postoperative effect of anterior cruciate ligament reconstruction preclinical study using a 7.1T micro-magnetic resonance imaging

High-field micro-magnetic resonance imaging (MRI) scanning may provide additional information for quantitative analysis of graft bone healing processes, thus serving as a promising supplementary method in graft and bone healing evaluation following anterior cruciate ligament reconstruction (ACLR) surgery during preclinical studies. The present study included 12 New Zealand white rabbits that underwent ACLR with polyethylene terephthalate (PET) ligament. At 4, 8, and 16 weeks following surgery, 4 rabbits were euthanized and knee joint samples were harvested for a 7.1T micro-magnetic resonance imaging (MRI) scan. The graft bone tunnel diameter and signal noise ratio (SNR) at the region of interest (ROI) were measured. Hematoxylin-eosin staining was performed at each time point to verify the graft bone healing process in histology. The bone tunnel diameter at the graft tunnel interface decreased over time in both femoral and tibial parts. Notably, the tunnel size was smaller than the diameter of the drilling Kirschner wire that was used to observe the femoral part and proximal site of the tibial part at 16 weeks following surgery. SNR research demonstrated that both the femoral and tibial part PET ligaments selected in the ROI exhibited a marked increase in SNR from the initial 4-week results. The micro-MRI result was consistent with that of histological analysis. Micro-MRI scanning was applied in an animal model that underwent ACL reconstruction surgery with PET ligament, and it was determined that micro-MRI is promising in quantitatively observing graft bone healing processes directly with a focus on graft tunnel distances and SNRs.

Calcium Intake in Bone Health: A Focus on Calcium-Rich Mineral Waters

Calcium is an essential element that plays numerous biological functions in the human body, of which one of the most important is skeleton mineralization. Bone is a mineralized connective tissue in which calcium represents the major component, conferring bone strength and structure. Proper dietary calcium intake is important for bone development and metabolism, and its requirement can vary throughout life. The mineral composition of drinking water is becoming relevant in the modulation of calcium homeostasis. In fact, calcium present in mineral drinking waters is an important quantitative source of calcium intake. This, together with its excellent bioavailability, contributes to the maintenance of the bone health. This article aims to examine studies that assessed the bioavailability of the calcium contained in calcium-rich mineral waters and their impact on bone health, including original data collected in a recent study in humans.

Micro-Finite Element Analysis of the Proximal Femur on the Basis of High-Resolution Magnetic Resonance Images

PURPOSE OF REVIEW

Hip fractures have catastrophic consequences. The purpose of this article is to review recent developments in high-resolution magnetic resonance imaging (MRI)-guided finite element analysis (FEA) of the hip as a means to determine subject-specific bone strength.

RECENT FINDINGS

Despite the ability of DXA to predict hip fracture, the majority of fractures occur in patients who do not have BMD T scores less than - 2.5. Therefore, without other detection methods, these individuals go undetected and untreated. Of methods available to image the hip, MRI is currently the only one capable of depicting bone microstructure in vivo. Availability of microstructural MRI allows generation of patient-specific micro-finite element models that can be used to simulate real-life loading conditions and determine bone strength. MRI-based FEA enables radiation-free approach to assess hip fracture strength. With further validation, this technique could become a potential clinical tool in managing hip fracture risk.

Bone biopsy in nephrology practice

Renal osteodystrophy (ROD), a group of metabolic bone diseases secondary to chronic kidney disease (CKD), still represents a great challenge to nephrologists. Its management is tailored by the type of bone lesion - of high or low turnover - that cannot be accurately predicted by serum biomarkers of bone remodeling available in daily clinical practice, mainly parathyroid hormone (PTH) and alkaline phosphatase (AP). In view of this limitation, bone biopsy followed by bone quantitative histomorphometry, the gold-standard method for the diagnosis of ROD, is still considered of paramount importance. Bone biopsy has also been recommended for evaluation of osteoporosis in the CKD setting to help physicians choose the best anti-osteoporotic drug. Importantly, bone biopsy is the sole diagnostic method capable of providing dynamic information on bone metabolism. Trabecular and cortical bones may be analyzed separately by evaluating their structural and dynamic parameters, thickness and porosity, respectively. Deposition of metals, such as aluminum and iron, on bone may also be detected. Despite of these unique characteristics, the interest on bone biopsy has declined over the last years and there are currently few centers around the world specialized on bone histomorphometry. In this review, we will discuss the bone biopsy technique, its indications, and the main information it can provide. The interest on bone biopsy should be renewed and nephrologists should be capacitated to perform it as part of their training during medical residency.

Artificial Intelligence Applied to Osteoporosis: A Performance Comparison of Machine Learning Algorithms in Predicting Fragility Fractures From MRI Data

BACKGROUND

A current challenge in osteoporosis is identifying patients at risk of bone fracture.

PURPOSE

To identify the machine learning classifiers that predict best osteoporotic bone fractures and, from the data, to highlight the imaging features and the anatomical regions that contribute most to prediction performance.

STUDY TYPE

Prospective (cross-sectional) case-control study.

POPULATION

Thirty-two women with prior fragility bone fractures, of mean age = 61.6 and body mass index (BMI) = 22.7 kg/m² , and 60 women without fractures, of mean age = 62.3 and BMI = 21.4 kg/m² . Field Strength/ Sequence: 3D FLASH at 3T.

ASSESSMENT

Quantitative MRI outcomes by software algorithms. Mechanical and topological microstructural parameters of the trabecular bone were calculated for five femoral regions, and added to the vector of features together with bone mineral density measurement, fracture risk assessment tool (FRAX) score, and personal characteristics such as age, weight, and height. We fitted 15 classifiers using 200 randomized cross-validation datasets. Statistical Tests: Data: Kolmogorov-Smirnov test for normality. Model Performance: sensitivity, specificity, precision, accuracy, F1-test, receiver operating characteristic curve (ROC). Two-sided t-test, with P < 0.05 for statistical significance.

RESULTS

The top three performing classifiers are RUS-boosted trees (in particular, performing best with head data, F1 = 0.64 ± 0.03), the logistic regression and the linear discriminant (both best with trochanteric datasets, F1 = 0.65 ± 0.03 and F1 = 0.67 ± 0.03, respectively). A permutation of these classifiers comprised the best three performers for four out of five anatomical datasets. After averaging across all the anatomical datasets, the score for the best performer, the boosted trees, was F1 = 0.63 ± 0.03 for All-features dataset, F1 = 0.52 ± 0.05 for the no-MRI dataset, and F1 = 0.48 ± 0.06 for the no-FRAX dataset. Data Conclusion: Of many classifiers, the RUS-boosted trees, the logistic regression, and the linear discriminant are best for predicting osteoporotic fracture. Both MRI and FRAX independently add value in identifying osteoporotic fractures. The femoral head, greater trochanter, and inter-trochanter anatomical regions within the proximal femur yielded better F1-scores for the best three classifiers.

LEVEL OF EVIDENCE

2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2019;49:1029-1038.

Magnetic resonance imaging based assessment of bone microstructure as a non-invasive alternative to histomorphometry in patients with chronic kidney disease

BACKGROUND

Chronic kidney disease (CKD) adversely affects bone microarchitecture and increases fracture risk. Historically, bone biopsy has been the 'gold standard' for evaluating renal bone disease but is invasive and infrequently performed. High-resolution magnetic resonance imaging (MRI) quantifies bone microarchitecture noninvasively. In patients with CKD, it has not been compared with results derived from bone biopsy or with imaging using dual energy X-ray absorptiometry (DXA).

METHODS

Fourteen patients with end-stage kidney disease (ESKD) underwent MRI at the distal tibia, bone mineral density (BMD) by dual energy X-ray absorptiometry (DXA; hip and spine) and transiliac bone biopsies with histomorphometry and microcomputed tomography (micro-CT). All patients had biomarkers of mineral metabolism. Associations were determined by Spearman's or Pearson's rank correlation coefficients.

RESULTS

MRI indices of trabecular network integrity, surface to curve ratio (S/C) and erosion index (EI), correlated to histomorphometric trabecular bone volume (S/C r = 0.85, p = 0.0003; EI r = -0.82, p = 0.001), separation (S/C r = -0.58, p = 0.039; EI r = 0.79, p = 0.0012) and thickness (S/C, r = 0.65, p = 0.017). MRI EI and trabecular thickness (TbTh) also correlated to micro-CT trabecular separation (EI r = 0.63, p = 0.02; TbTh r = -0.60, p = 0.02). Significant correlations were observed between histomorphometric mineralization and turnover indices and various MRI parameters. MRI-derived trabecular parameters were also significantly related to femoral neck BMD.

CONCLUSIONS

This study highlights the heterogeneity of bone microarchitecture at differing skeletal sites. MRI demonstrates significant, relevant associations to important bone biopsy and DXA indices and warrants further investigation to assess its potential to non-invasively evaluate changes in bone structure and quality over time.

Current and Emerging Diagnostic Imaging-Based Techniques for Assessment of Osteoporosis and Fracture Risk

Osteoporosis is a metabolic bone disorder characterized by low bone mass, degradation of bone microarchitecture, and susceptibility to fracture. It is a growing major health concern across the world, especially in the elderly population. Osteoporosis can cause hip or spinal fractures that may lead to high morbidity and socio-economic burden. Therefore, there is a need for early diagnosis of osteoporosis and prediction of fragility fracture risk. In this review, state of the art and recent advances in imaging techniques for diagnosis of osteoporosis and fracture risk assessment have been explored. Segmentation methods used to segment the regions of interest and texture analysis methods used for classification of healthy and osteoporotic subjects are also presented. Furthermore, challenges posed by the current diagnostic tools have been studied and feasible solutions to circumvent the limitations are discussed. Early diagnosis of osteoporosis and prediction of fracture risk require the development of highly precise and accurate low-cost diagnostic techniques that would help the elderly population in low economies.

Subchondral bone microarchitecture analysis in the proximal tibia at 7-T MRI

Background Bone remodels in response to mechanical loads and osteoporosis results from impaired ability of bone to remodel. Bone microarchitecture analysis provides information on bone quality beyond bone mineral density (BMD). Purpose To compare subchondral bone microarchitecture parameters in the medial and lateral tibia plateau in individuals with and without fragility fractures. Material and Methods Twelve female patients (mean age = 58 ± 15 years; six with and six without previous fragility fractures) were examined with dual-energy X-ray absorptiometry (DXA) and 7-T magnetic resonance imaging (MRI) of the proximal tibia. A transverse high-resolution three-dimensional fast low-angle shot sequence was acquired (0.234 × 0.234 × 1 mm). Digital topological analysis (DTA) was applied to the medial and lateral subchondral bone of the proximal tibia. The following DTA-based bone microarchitecture parameters were assessed: apparent bone volume; trabecular thickness; profile-edge-density (trabecular bone erosion parameter); profile-interior-density (intact trabecular rods parameter); plate-to-rod ratio; and erosion index. We compared femoral neck T-scores and bone microarchitecture parameters between patients with and without fragility fracture. Results There was no statistical significant difference in femoral neck T-scores between individuals with and without fracture (-2.4 ± 0.9 vs. -1.8 ± 0.7, P = 0.282). Apparent bone volume in the medial compartment was lower in patients with previous fragility fracture (0.295 ± 0.022 vs. 0.317 ± 0.009; P = 0.016). Profile-edge-density, a trabecular bone erosion parameter, was higher in patients with previous fragility fracture in the medial (0.008 ± 0.003 vs. 0.005 ± 0.001) and lateral compartment (0.008 ± 0.002 vs. 0.005 ± 0.001); both P = 0.025. Other DTA parameters did not differ between groups. Conclusion 7-T MRI and DTA permit detection of subtle changes in subchondral bone quality when differences in BMD are not evident.

The robustness of T2 value as a trabecular structural index at multiple spatial resolutions of 7 Tesla MRI

PURPOSE

To evaluate the robustness of MR transverse relaxation times of trabecular bone from spin-echo and gradient-echo acquisitions at multiple spatial resolutions of 7 T.

METHODS

The effects of MRI resolutions to T₂ and T2* of trabecular bone were numerically evaluated by Monte Carlo simulations. T₂ , T2*, and trabecular structural indices from multislice multi-echo and UTE acquisitions were measured in defatted human distal femoral condyles on a 7 T scanner. Reference structural indices were extracted from high-resolution microcomputed tomography images. For bovine knee trabecular samples with intact bone marrow, T₂ and T2* were measured by degrading spatial resolutions on a 7 T system.

RESULTS

In the defatted trabecular experiment, both T₂ and T2* values showed strong ( |r| > 0.80) correlations with trabecular spacing and number, at a high spatial resolution of 125 µm³ . The correlations for MR image-segmentation-derived structural indices were significantly degraded ( |r| < 0.50) at spatial resolutions of 250 and 500 µm³ . The correlations for T2* rapidly dropped ( |r| < 0.50) at a spatial resolution of 500 µm³ , whereas those for T₂ remained consistently high ( |r| > 0.85). In the bovine trabecular experiments with intact marrow, low-resolution (approximately 1 mm³ , 2 minutes) T₂ values did not shorten ( |r| > 0.95 with respect to approximately 0.4 mm³ , 11 minutes) and maintained consistent correlations ( |r| > 0.70) with respect to trabecular spacing (turbo spin echo, 22.5 minutes).

CONCLUSION

T₂ measurements of trabeculae at 7 T are robust with degrading spatial resolution and may be preferable in assessing trabecular spacing index with reduced scan time, when high-resolution 3D micro-MRI is difficult to obtain.

Accuracy of MRI-based finite element assessment of distal tibia compared to mechanical testing

High-resolution MRI-derived finite element analysis (FEA) has been used in translational research to estimate the mechanical competence of human bone. However, this method has yet to be validated adequately under in vivo imaging spatial resolution or signal-to-noise conditions. We therefore compared MRI-based metrics of bone strength to those obtained from direct, mechanical testing. The study was conducted on tibiae from 17 human donors (12 males and five females, aged 33 to 88years) with no medical history of conditions affecting bone mineral homeostasis. A 25mm segment from each distal tibia underwent MR imaging in a clinical 3-Tesla scanner using a fast large-angle spin-echo (FLASE) sequence at 0.137mm×0.137mm×0.410mm voxel size, in accordance with in vivo scanning protocol. The resulting high-resolution MR images were processed and used to generate bone volume fraction maps, which served as input for the micro-level FEA model. Simulated compression was applied to compute stiffness, yield strength, ultimate strength, modulus of resilience, and toughness, which were then compared to metrics obtained from mechanical testing. Moderate to strong positive correlations were found between computationally and experimentally derived values of stiffness (R²=0.77, p<0.0001), yield strength (R²=0.38, p=0.0082), ultimate strength (R²=0.40, p=0.0067), and resilience (R²=0.46, p=0.0026), but only a weak, albeit significant, correlation was found for toughness (R²=0.26, p=0.036). Furthermore, experimentally derived yield strength and ultimate strength were moderately correlated with MRI-derived stiffness (R²=0.48, p=0.0022 and R²=0.58, p=0.0004, respectively). These results suggest that high-resolution MRI-based finite element (FE) models are effective in assessing mechanical parameters of distal skeletal extremities.

Is there a practical role for a virtual bone biopsy using high-resolution imaging of bone in patients with chronic kidney disease?

Renal osteodystrophy (ROD) refers to alterations in bone turnover, mineralisation, mass and microarchitecture in patients with chronic kidney disease (CKD) and represents the skeletal component of 'CKD-mineral and bone disorder'. Changes in bone structure lead to impaired bone quality, compromised bone strength and increased susceptibility to fractures with associated significant morbidity, mortality and financial cost. Diagnosis and management of ROD is hindered by the inadequacy of currently available diagnostic methods to interpret the complex pathophysiology. Bone biopsy, the perceived gold standard test to assess ROD, is invasive and suboptimal for disease screening and management in routine clinical practice. High-resolution imaging, such as high-resolution peripheral quantitative computed tomography and high-resolution magnetic resonance imaging provide accurate non-invasive quantification of bone microarchitecture and facilitate assessment of mechanical competence of bone, correlating with skeletal fragility. We discuss the potential for these imaging techniques in patients with CKD to provide quantification and assessment of bone structure and strength. When used in conjunction with serum biomarkers, these investigative tools may provide a non-invasive diagnostic virtual bone biopsy.

3-T MR Imaging of Proximal Femur Microarchitecture in Subjects with and without Fragility Fracture and Nonosteoporotic Proximal Femur Bone Mineral Density

Purpose To determine if 3-T magnetic resonance (MR) imaging of proximal femur microarchitecture can allow discrimination of subjects with and without fragility fracture who do not have osteoporotic proximal femur bone mineral density (BMD). Materials and Methods Sixty postmenopausal women (30 with and 30 without fragility fracture) who had BMD T scores of greater than -2.5 in the hip were recruited. All subjects underwent dual-energy x-ray absorptiometry to assess BMD and 3-T MR imaging of the same hip to assess bone microarchitecture. World Health Organization Fracture Risk Assessment Tool (FRAX) scores were also computed. We used the Mann-Whitney test, receiver operating characteristics analyses, and Spearman correlation estimates to assess differences between groups, discriminatory ability with parameters, and correlations among BMD, microarchitecture, and FRAX scores. Results Patients with versus without fracture showed a lower trabecular plate-to-rod ratio (median, 2.41 vs 4.53, respectively), lower trabecular plate width (0.556 mm vs 0.630 mm, respectively), and lower trabecular thickness (0.114 mm vs 0.126 mm) within the femoral neck, and higher trabecular rod disruption (43.5 vs 19.0, respectively), higher trabecular separation (0.378 mm vs 0.323 mm, respectively), and lower trabecular number (0.158 vs 0.192, respectively), lower trabecular connectivity (0.015 vs 0.027, respectively) and lower trabecular plate-to-rod ratio (6.38 vs 8.09, respectively) in the greater trochanter (P < .05 for all). Trabecular plate-to-rod ratio, plate width, and thickness within the femoral neck (areas under the curve [AUCs], 0.654-0.683) and trabecular rod disruption, number, connectivity, plate-to-rod ratio, and separation within the greater trochanter (AUCs, 0.662-0.694) allowed discrimination of patients with fracture from control subjects. Femoral neck, total hip, and spine BMD did not differ between and did not allow discrimination between groups. FRAX scores including and not including BMD allowed discrimination between groups (AUCs, 0.681-0.773). Two-factor models (one MR imaging microarchitectural parameter plus a FRAX score without BMD) allowed discrimination between groups (AUCs, 0.702-0.806). There were no linear correlations between BMD and microarchitectural parameters (Spearman ρ, -0.198 to 0.196). Conclusion 3-T MR imaging of proximal femur microarchitecture allows discrimination between subjects with and without fragility fracture who have BMD T scores of greater than -2.5 and may provide different information about bone quality than that provided by dual-energy x-ray absorptiometry. ^© RSNA, 2018.

Relationship between subchondral bone microstructure and articular cartilage in the osteoarthritic knee using 3T MRI

BACKGROUND

The importance of subchondral bone in the pathogenesis of osteoarthritis (OA) has drawn interest.

PURPOSE

To investigate subregional trabecular bone microstructural features and to determine the relationship between cartilage and trabecular bone in the osteoarthritic human knee.

STUDY TYPE

Prospective study.

SUBJECTS

In all, 92 knees were enrolled and divided into three groups: without OA, mild OA, and severe OA.

SEQUENCE

A sagittal 3D balanced fast field echo (3D B-FFE) sequence and FatSat 3D fast field echo (3D-FFE) sequence at 3T MRI.

ASSESSMENT

The trabecular bone in 12 sites of the knee joint was evaluated using digital topological analysis, and the cartilage thickness in four sites was calculated.

STATISTICAL TEST

Trabecular bone and cartilage parameters between groups were compared using analysis of variance (ANOVA) with Bonferroni adjustment, and their correlations were analyzed using Pearson's correlation coefficient.

RESULTS

Within both femoral condyles, the trabecular bone structure deteriorated in mild OA, showing a lower bone volume fraction (BVF) (0.15 to 0.12, P < 0.05), higher erosion index (EI) (2.25 to 2.28, P < 0.01), and a lower plate-to-rod ratio (SCR) (6.22 to 5.96, P < 0.05). Within medial and lateral tibia, deterioration in the trabecular bone was also observed, demonstrating a lower BVF (0.15 to 0.12 P < 0.05) and a higher EI (2.25 to 2.61, P < 0.05). Cartilage attrition mainly occurred in the medial joint. Extensive correlations were found between the medial cartilage thickness and subregional trabecular parameters. There was mainly a positive correlation with both femoral BVFs (r > 0.3, P < 0.05), and a negative correlation with the tibia SCR (r < -0.2, P < 0.05).

DATA CONCLUSION

In the early stage of OA, trabecular bone osteoporotic changes were observed in both femoral condyles and the tibia. Based on a strong correlation with the medial cartilage thickness, the trabecular structural topological analysis may be useful for elucidating OA onset and progression.

LEVEL OF EVIDENCE

2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2018.

MRI assessment of bone structure and microarchitecture

Osteoporosis is a disease of weak bone and increased fracture risk caused by low bone mass and microarchitectural deterioration of bone tissue. The standard-of-care test used to diagnose osteoporosis, dual-energy x-ray absorptiometry (DXA) estimation of areal bone mineral density (BMD), has limitations as a tool to identify patients at risk for fracture and as a tool to monitor therapy response. Magnetic resonance imaging (MRI) assessment of bone structure and microarchitecture has been proposed as another method to assess bone quality and fracture risk in vivo. MRI is advantageous because it is noninvasive, does not require ionizing radiation, and can evaluate both cortical and trabecular bone. In this review article, we summarize and discuss research progress on MRI of bone structure and microarchitecture over the last decade, focusing on in vivo translational studies. Single-center, in vivo studies have provided some evidence for the added value of MRI as a biomarker of fracture risk or treatment response. Larger, prospective, multicenter studies are needed in the future to validate the results of these initial translational studies.

LEVEL OF EVIDENCE

5 Technical Efficacy: Stage 5 J. MAGN. RESON. IMAGING 2017;46:323-337.

Assessing agreement between preclinical magnetic resonance imaging and histology: An evaluation of their image qualities and quantitative results

One consequence of demographic change is the increasing demand for biocompatible materials for use in implants and prostheses. This is accompanied by a growing number of experimental animals because the interactions between new biomaterials and its host tissue have to be investigated. To evaluate novel materials and engineered tissues the use of non-destructive imaging modalities have been identified as a strategic priority. This provides the opportunity for studying interactions repeatedly with individual animals, along with the advantages of reduced biological variability and decreased number of laboratory animals. However, histological techniques are still the golden standard in preclinical biomaterial research. The present article demonstrates a detailed method comparison between histology and magnetic resonance imaging. This includes the presentation of their image qualities as well as the detailed statistical analysis for assessing agreement between quantitative measures. Exemplarily, the bony ingrowth of tissue engineered bone substitutes for treatment of a cleft-like maxillary bone defect has been evaluated. By using a graphical concordance analysis the mean difference between MRI results and histomorphometrical measures has been examined. The analysis revealed a slightly but significant bias in the case of the bone volume [Formula: see text] and a clearly significant deviation for the remaining defect width [Formula: see text] But the study although showed a considerable effect of the analyzed section position to the quantitative result. It could be proven, that the bias of the data sets was less originated due to the imaging modalities, but mainly on the evaluation of different slice positions. The article demonstrated that method comparisons not always need the use of an independent animal study, additionally.

Quantitative MRI and spectroscopy of bone marrow

Bone marrow is one of the largest organs in the human body, enclosing adipocytes, hematopoietic stem cells, which are responsible for blood cell production, and mesenchymal stem cells, which are responsible for the production of adipocytes and bone cells. Magnetic resonance imaging (MRI) is the ideal imaging modality to monitor bone marrow changes in healthy and pathological states, thanks to its inherent rich soft‐tissue contrast. Quantitative bone marrow MRI and magnetic resonance spectroscopy (MRS) techniques have been also developed in order to quantify changes in bone marrow water–fat composition, cellularity and perfusion in different pathologies, and to assist in understanding the role of bone marrow in the pathophysiology of systemic diseases (e.g. osteoporosis). The present review summarizes a large selection of studies published until March 2017 in proton‐based quantitative MRI and MRS of bone marrow. Some basic knowledge about bone marrow anatomy and physiology is first reviewed. The most important technical aspects of quantitative MR methods measuring bone marrow water–fat composition, fatty acid composition, perfusion, and diffusion are then described. Finally, previous MR studies are reviewed on the application of quantitative MR techniques in both healthy aging and diseased bone marrow affected by osteoporosis, fractures, metabolic diseases, multiple myeloma, and bone metastases.

Level of Evidence: 3

Technical Efficacy: Stage 2

J. Magn. Reson. Imaging 2018;47:332–353.

Estimation of trabecular bone parameters in children from multisequence MRI using texture-based regression

PURPOSE

This paper presents a statistical approach for the prediction of trabecular bone parameters from low-resolution multisequence magnetic resonance imaging (MRI) in children, thus addressing the limitations of high-resolution modalities such as HR-pQCT, including the significant exposure of young patients to radiation and the limited applicability of such modalities to peripheral bones in vivo.

METHODS

A statistical predictive model is constructed from a database of MRI and HR-pQCT datasets, to relate the low-resolution MRI appearance in the cancellous bone to the trabecular parameters extracted from the high-resolution images. The description of the MRI appearance is achieved between subjects by using a collection of feature descriptors, which describe the texture properties inside the cancellous bone, and which are invariant to the geometry and size of the trabecular areas. The predictive model is built by fitting to the training data a nonlinear partial least square regression between the input MRI features and the output trabecular parameters.

RESULTS

Detailed validation based on a sample of 96 datasets shows correlations >0.7 between the trabecular parameters predicted from low-resolution multisequence MRI based on the proposed statistical model and the values extracted from high-resolution HRp-QCT.

CONCLUSIONS

The obtained results indicate the promise of the proposed predictive technique for the estimation of trabecular parameters in children from multisequence MRI, thus reducing the need for high-resolution radiation-based scans for a fragile population that is under development and growth.

Advances in imaging approaches to fracture risk evaluation

Fragility fractures are a growing problem worldwide, and current methods for diagnosing osteoporosis do not always identify individuals who require treatment to prevent a fracture and may misidentify those not a risk. Traditionally, fracture risk is assessed using dual-energy X-ray absorptiometry, which provides measurements of areal bone mineral density at sites prone to fracture. Recent advances in imaging show promise in adding new information that could improve the prediction of fracture risk in the clinic. As reviewed herein, advances in quantitative computed tomography (QCT) predict hip and vertebral body strength; high-resolution HR-peripheral QCT (HR-pQCT) and micromagnetic resonance imaging assess the microarchitecture of trabecular bone; quantitative ultrasound measures the modulus or tissue stiffness of cortical bone; and quantitative ultrashort echo-time MRI methods quantify the concentrations of bound water and pore water in cortical bone, which reflect a variety of mechanical properties of bone. Each of these technologies provides unique characteristics of bone and may improve fracture risk diagnoses and reduce prevalence of fractures by helping to guide treatment decisions.