T1, T2, and Fat Fraction Cardiac MR Fingerprinting: Preliminary Clinical Evaluation

Multiparametric quantification of T1 and T2 relaxation time of bone metastasis in comparison with red or fatty bone marrow using magnetic resonance fingerprinting

OBJECTIVES

To assess the T1 and T2 values of bone marrow lesions in spine and pelvis derived from magnetic resonance fingerprinting (MRF) and to evaluate the differences in values among bone metastasis, red marrow and fatty marrow.

METHODS

Sixty patients who underwent lumbar spine and pelvic MRI with magnetic resonance fingerprinting were retrospectively included. Among eligible patients, those with bone metastasis, benign red marrow deposition and normal fatty marrow were identified. Two radiologists independently measured the T1 and T2 values from metastatic bone lesions, fatty marrow, and red marrow deposition on three-dimensional-magnetic resonance fingerprinting. Intergroup comparison and interobserver agreement were analyzed.

RESULTS

T1 relaxation time was significantly higher in osteoblastic metastasis than in red marrow (1674.6 ± 436.3 vs 858.7 ± 319.5, p < .001). Intraclass correlation coefficients for T1 and T2 values were 0.96 (p < 0.001) and 0.83 (p < 0.001), respectively. T2 relaxation time of osteoblastic metastasis and red marrow deposition had no evidence of a difference (osteoblastic metastasis, 57.9 ± 25.0 vs red marrow, 58.0 ± 34.4, p = 0.45), as were the average T2 values of osteolytic metastasis and red marrow deposition (osteolytic metastasis, 45.3 ± 15.1 vs red marrow, 58.0 ± 34.4, p = 0.63).

CONCLUSIONS

We report the feasibility of three-dimensional-magnetic resonance fingerprinting based quantification of bone marrow to differentiate bone metastasis from red marrow. Simultaneous T1 and T2 quantification of metastasis and red marrow deposition was possible in spine and pelvis and showed significant different values with excellent inter-reader agreement.

ADVANCE IN KNOWLEDGE

T1 values from three-dimensional-magnetic resonance fingerprinting might be a useful quantifier for evaluating bone marrow lesions.

Bi-component dictionary matching for MR fingerprinting for efficient quantification of fat fraction and water T1 in skeletal muscle

PURPOSE

To propose an efficient bi-component MR fingerprinting (MRF) fitting method using a Variable Projection (VARPRO) strategy, applied to the quantification of fat fraction (FF) and water T1 (T 1 H 2 0 $$ \mathrm{T}{1}_{{\mathrm{H}}_20} $$ ) in skeletal muscle tissues.

METHODS

The MRF signals were analyzed in a two-step process by comparing them to the elements of separate water and fat dictionaries (bi-component dictionary matching). First, each pair of water and fat dictionary elements was fitted to the acquired signal to determine an optimal FF that was used to merge the fingerprints in a combined water/fat dictionary. Second, standard dictionary matching was applied to the combined dictionary for determining the remaining parameters. A clustering method was implemented to further accelerate the fitting. Accuracy, precision, and matching time of this approach were evaluated on both numerical and in vivo datasets, and compared to the reference dictionary-matching approach that includes FF as a dictionary parameter.

RESULTS

In numerical phantoms, all MRF parameters showed high correlation with ground truth for the reference and the bi-component method (R2  > 0.98). In vivo, the estimated parameters from the proposed method were highly correlated with those from the reference approach (R2  > 0.997). The bi-component method achieved an acceleration factor of up to 360 compared to the reference dictionary matching.

CONCLUSION

The proposed bi-component fitting approach enables a significant acceleration of the reconstruction of MRF parameter maps for fat-water imaging, while maintaining comparable precision and accuracy to the reference on FF andT 1 H 2 0 $$ \mathrm{T}{1}_{{\mathrm{H}}_20} $$ estimation.

Cardiac MR Fingerprinting: Overview, Technical Developments, and Applications

Cardiovascular magnetic resonance (CMR) is an established imaging modality with proven utility in assessing cardiovascular diseases. The ability of CMR to characterize myocardial tissue using T1 - and T2 -weighted imaging, parametric mapping, and late gadolinium enhancement has allowed for the non-invasive identification of specific pathologies not previously possible with modalities like echocardiography. However, CMR examinations are lengthy and technically complex, requiring multiple pulse sequences and different anatomical planes to comprehensively assess myocardial structure, function, and tissue composition. To increase the overall impact of this modality, there is a need to simplify and shorten CMR exams to improve access and efficiency, while also providing reproducible quantitative measurements. Multiparametric MRI techniques that measure multiple tissue properties offer one potential solution to this problem. This review provides an in-depth look at one such multiparametric approach, cardiac magnetic resonance fingerprinting (MRF). The article is structured as follows. First, a brief review of single-parametric and (non-Fingerprinting) multiparametric CMR mapping techniques is presented. Second, a general overview of cardiac MRF is provided covering pulse sequence implementation, dictionary generation, fast k-space sampling methods, and pattern recognition. Third, recent technical advances in cardiac MRF are covered spanning a variety of topics, including simultaneous multislice and 3D sampling, motion correction algorithms, cine MRF, synthetic multicontrast imaging, extensions to measure additional clinically important tissue properties (proton density fat fraction, T2 *, and T1ρ ), and deep learning methods for image reconstruction and parameter estimation. The last section will discuss potential clinical applications, concluding with a perspective on how multiparametric techniques like MRF may enable streamlined CMR protocols. LEVEL OF EVIDENCE: 5 TECHNICAL EFFICACY: Stage 1.

Magnetic Resonance Fingerprinting: A Review of Clinical Applications

ABSTRACT

Magnetic resonance fingerprinting (MRF) is an approach to quantitative magnetic resonance imaging that allows for efficient simultaneous measurements of multiple tissue properties, which are then used to create accurate and reproducible quantitative maps of these properties. As the technique has gained popularity, the extent of preclinical and clinical applications has vastly increased. The goal of this review is to provide an overview of currently investigated preclinical and clinical applications of MRF, as well as future directions. Topics covered include MRF in neuroimaging, neurovascular, prostate, liver, kidney, breast, abdominal quantitative imaging, cardiac, and musculoskeletal applications.

Toward a realistic in silico abdominal phantom for QSM

PURPOSE

QSM outside the brain has recently gained interest, particularly in the abdominal region. However, the absence of reliable ground truths makes difficult to assess reconstruction algorithms, whose quality is already compromised by additional signal contributions from fat, gases, and different kinds of motion. This work presents a realistic in silico phantom for the development, evaluation and comparison of abdominal QSM reconstruction algorithms.

METHODS

Synthetic susceptibility andR 2 * $$ {R}_2^{\ast } $$ maps were generated by segmenting and postprocessing the abdominal 3T MRI data from a healthy volunteer. Susceptibility andR 2 * $$ {R}_2^{\ast } $$ values in different tissues/organs were assigned according to literature and experimental values and were also provided with realistic textures. The signal was simulated using as input the synthetic QSM andR 2 * $$ {R}_2^{\ast } $$ maps and fat contributions. Three susceptibility scenarios and two acquisition protocols were simulated to compare different reconstruction algorithms.

RESULTS

QSM reconstructions show that the phantom allows to identify the main strengths and limitations of the acquisition approaches and reconstruction algorithms, such as in-phase acquisitions, water-fat separation methods, and QSM dipole inversion algorithms.

CONCLUSION

The phantom showed its potential as a ground truth to evaluate and compare reconstruction pipelines and algorithms. The publicly available source code, designed in a modular framework, allows users to easily modify the susceptibility,R 2 * $$ {R}_2^{\ast } $$ and TEs, and thus creates different abdominal scenarios.

Free-breathing myocardial T1 mapping using inversion-recovery radial FLASH and motion-resolved model-based reconstruction

PURPOSE

To develop a free-breathing myocardialT 1 $$ {\mathrm{T}}_1 $$ mapping technique using inversion-recovery (IR) radial fast low-angle shot (FLASH) and calibrationless motion-resolved model-based reconstruction.

METHODS

Free-running (free-breathing, retrospective cardiac gating) IR radial FLASH is used for data acquisition at 3T. First, to reduce the waiting time between inversions, an analytical formula is derived that takes the incompleteT 1 $$ {\mathrm{T}}_1 $$ recovery into account for an accurateT 1 $$ {\mathrm{T}}_1 $$ calculation. Second, the respiratory motion signal is estimated from the k-space center of the contrast varying acquisition using an adapted singular spectrum analysis (SSA-FARY) technique. Third, a motion-resolved model-based reconstruction is used to estimate both parameter and coil sensitivity maps directly from the sorted k-space data. Thus, spatiotemporal total variation, in addition to the spatial sparsity constraints, can be directly applied to the parameter maps. Validations are performed on an experimental phantom, 11 human subjects, and a young landrace pig with myocardial infarction.

RESULTS

In comparison to an IR spin-echo reference, phantom results confirm goodT 1 $$ {\mathrm{T}}_1 $$ accuracy, when reducing the waiting time from 5 s to 1 s using the new correction. The motion-resolved model-based reconstruction further improvesT 1 $$ {\mathrm{T}}_1 $$ precision compared to the spatial regularization-only reconstruction. Aside from showing that a reliable respiratory motion signal can be estimated using modified SSA-FARY, in vivo studies demonstrate that dynamic myocardialT 1 $$ {\mathrm{T}}_1 $$ maps can be obtained within 2 min with good precision and repeatability.

CONCLUSION

Motion-resolved myocardialT 1 $$ {\mathrm{T}}_1 $$ mapping during free-breathing with good accuracy, precision and repeatability can be achieved by combining inversion-recovery radial FLASH, self-gating and a calibrationless motion-resolved model-based reconstruction.

Quantitative MRI in cardiometabolic disease: From conventional cardiac and liver tissue mapping techniques to multi-parametric approaches

Cardiometabolic disease refers to the spectrum of chronic conditions that include diabetes, hypertension, atheromatosis, non-alcoholic fatty liver disease, and their long-term impact on cardiovascular health. Histological studies have confirmed several modifications at the tissue level in cardiometabolic disease. Recently, quantitative MR methods have enabled non-invasive myocardial and liver tissue characterization. MR relaxation mapping techniques such as T₁, T_1ρ, T₂ and T₂* provide a pixel-by-pixel representation of the corresponding tissue specific relaxation times, which have been shown to correlate with fibrosis, altered tissue perfusion, oedema and iron levels. Proton density fat fraction mapping approaches allow measurement of lipid tissue in the organ of interest. Several studies have demonstrated their utility as early diagnostic biomarkers and their potential to bear prognostic implications. Conventionally, the quantification of these parameters by MRI relies on the acquisition of sequential scans, encoding and mapping only one parameter per scan. However, this methodology is time inefficient and suffers from the confounding effects of the relaxation parameters in each single map, limiting wider clinical and research applications. To address these limitations, several novel approaches have been proposed that encode multiple tissue parameters simultaneously, providing co-registered multiparametric information of the tissues of interest. This review aims to describe the multi-faceted myocardial and hepatic tissue alterations in cardiometabolic disease and to motivate the application of relaxometry and proton-density cardiac and liver tissue mapping techniques. Current approaches in myocardial and liver tissue characterization as well as latest technical developments in multiparametric quantitative MRI are included. Limitations and challenges of these novel approaches, and recommendations to facilitate clinical validation are also discussed.

Free-running 3D whole-heart T1 and T2 mapping and cine MRI using low-rank reconstruction with non-rigid cardiac motion correction

PURPOSE

To introduce non-rigid cardiac motion correction into a novel free-running framework for the simultaneous acquisition of 3D whole-heart myocardial <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> and <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> maps and cine images, enabling a <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mo>∼</mml:mo></mml:mrow> <mml:annotation>$$ \sim $$</mml:annotation></mml:semantics> </mml:math> 3-min scan.

METHODS

Data were acquired using a free-running 3D golden-angle radial readout interleaved with inversion recovery and <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> -preparation pulses. After correction for translational respiratory motion, non-rigid cardiac-motion-corrected reconstruction with dictionary-based low-rank compression and patch-based regularization enabled 3D whole-heart <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> and <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> mapping at any given cardiac phase as well as whole-heart cardiac cine imaging. The framework was validated and compared with established methods in 11 healthy subjects.

RESULTS

Good quality 3D <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> and <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> maps and cine images were reconstructed for all subjects. Septal <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> values using the proposed approach ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mn>1200</mml:mn> <mml:mo>±</mml:mo> <mml:mn>50</mml:mn></mml:mrow> <mml:annotation>$$ 1200\pm 50 $$</mml:annotation></mml:semantics> </mml:math> ms) were higher than those from a 2D MOLLI sequence ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mn>1063</mml:mn> <mml:mo>±</mml:mo> <mml:mn>33</mml:mn></mml:mrow> <mml:annotation>$$ 1063\pm 33 $$</mml:annotation></mml:semantics> </mml:math> ms), which is known to underestimate <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> , while <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> values from the proposed approach ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mn>51</mml:mn> <mml:mo>±</mml:mo> <mml:mn>4</mml:mn></mml:mrow> <mml:annotation>$$ 51\pm 4 $$</mml:annotation></mml:semantics> </mml:math> ms) were in good agreement with those from a 2D GraSE sequence ( <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mn>51</mml:mn> <mml:mo>±</mml:mo> <mml:mn>2</mml:mn></mml:mrow> <mml:annotation>$$ 51\pm 2 $$</mml:annotation></mml:semantics> </mml:math> ms).

CONCLUSION

The proposed technique provides 3D <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>1</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_1 $$</mml:annotation></mml:semantics> </mml:math> and <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics> <mml:mrow> <mml:msub><mml:mrow><mml:mi>T</mml:mi></mml:mrow> <mml:mrow><mml:mn>2</mml:mn></mml:mrow> </mml:msub> </mml:mrow> <mml:annotation>$$ {T}_2 $$</mml:annotation></mml:semantics> </mml:math> maps and cine images with isotropic spatial resolution in a single <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:semantics><mml:mrow><mml:mo>∼</mml:mo></mml:mrow> <mml:annotation>$$ \sim $$</mml:annotation></mml:semantics> </mml:math> 3.3-min scan.

Optimisation of data acquisition towards continuous cardiac Magnetic Resonance Fingerprinting applications

PURPOSE

Assess and optimise acquisition parameters for continuous cardiac Magnetic Resonance Fingerprinting (MRF).

METHODS

Different acquisition schemes (flip angle amplitude, lobe size, T2-preparation pulses) for cardiac MRF were assessed in simulations and phantom and demonstrated in one healthy volunteer. Three different experimental designs were evaluated using central composite and fractional factorial designs. Relative errors for T1 and T2 were calculated for a wide range of realistic T1 and T2 value combinations. The effect of different designs on the accuracy of T1 and T2 was assessed using response surface modelling and Cohen's f calculations.

RESULTS

Larger flip angle amplitudes lead to an improvement of T2 accuracy and precision for simulations and phantom experiments. Similar effects could also be shown qualitatively in in-vivo scans. Accuracy and precision of T1 were robust to different design parameters with improved values for faster flip angle variation. Cohen's f showed that T2-preparation pulses influence the accuracy of T2. The number of pulses used is the most important parameter. Without T2-preparation pulses, RMSE were 3.0 ± 8.09 % for T1 and 16.24 ± 14.47 % for T2. Using those pulses reduced the RMSE to 2.3 ± 8.4 % for T1 and 14.11 ± 13.46 % for T2. Nonetheless, even if the improvement is significant, RMSE are still too high for reliable quantification.

CONCLUSION

In contrast to previous study using triggered MRF sequences using < 30° flip angles, large flip angle amplitudes led to better results for continuous cardiac MRF sequences. T2-preparation pulse can improve the accuracy of T2 estimation but lead to longer scan times.

Imaging Methods: Magnetic Resonance Imaging

Myocardial inflammation occurs following activation of the cardiac immune system, producing characteristic changes in the myocardial tissue. Cardiovascular magnetic resonance is the non-invasive imaging gold standard for myocardial tissue characterization, and is able to detect image signal changes that may occur resulting from inflammation, including edema, hyperemia, capillary leak, necrosis, and fibrosis. Conventional cardiovascular magnetic resonance for the detection of myocardial inflammation and its sequela include T2-weighted imaging, parametric T1- and T2-mapping, and gadolinium-based contrast-enhanced imaging. Emerging techniques seek to image several parameters simultaneously for myocardial tissue characterization, and to depict subtle immune-mediated changes, such as immune cell activity in the myocardium and cardiac cell metabolism. This review article outlines the underlying principles of current and emerging cardiovascular magnetic resonance methods for imaging myocardial inflammation.

Analysing the effects of metallic biomaterial design and imaging sequences on MRI interpretation challenges due to image artefacts

Biometals cause signal loss and susceptibility artefacts in the surrounding tissue, resulting in deterioration in magnetic resonance (MR) images. This metal-artefact effect may lead to interpretation challenges for MR images. Therefore, artefact reduction is required to obtain higher-quality images. This paper aims to analyse the impact of imaging sequence and metallic biomaterial design on MR image artefacts. In this respect, implant specimens were designed in thin, thick, and pointed forms and manufactured using 316LVM, 316L, CoCr-alloy, and Ti-alloy, which are commonly utilized materials in the biomaterials field. Specimens were placed in a phantom that simulates average human anatomy separately and scanned in a 1.5 T MRI under four imaging conditions: "Axial-T₁-Gradient-Echo (GRE)", "Sagittal-T₁-GRE", "Axial-T₂-Spin-Echo (SE)" and "Sagittal-T₂-SE". Images were analysed regarding image artefact amount. The lower magnetic susceptibility of Ti-alloy specimens caused 84.76% less deterioration than 316LVM specimens in the MR images with the mean image artefact-to-specimen size ratio. Thinner implant designs provided better performance regarding the metal artefact by reducing the artefact-to-specimen size ratio. T₂SE decreased the image artefact by 44.7% for 316LVM and 54.6% for Ti-Alloy specimens and provided better image quality than T₁GRE for clinical interpretation. This study reveals that image artefacts directly depend on material content, implant volume, geometry, and imaging sequence selection. The minor artefact effect of T₂SE provides more accurate MR images than T₁GRE regarding the interpretation of the images of the patients with biometals. The higher magnetic susceptibility of biometals causes more deterioration of the images.

State of the Art: Quantitative Cardiac MRI in Cardiac Amyloidosis

Cardiac amyloidosis (CA) is characterized by amyloid infiltration in the myocardial extracellular space, causing heart failure. Patients with CA are currently underdiagnosed. Cardiac involvement is significantly associated with the prognosis and treatment decision-making for CA. Early identification and accurate stratification are the crucial first step in patient management. Comprehensive cardiac MRI-based evaluation of the cardiac structure, function, and myocardial tissue characterization assesses cardiac involvement by tracing disease processes. Emerging quantitative tissue characterization techniques have introduced new measures that can identify early staged CA and monitor disease progression or response after treatment. Quantitative cardiac MRI is becoming an instrumental tool in understanding CA, which leads to changes in individualized patient care. This review aimed to discuss the quantitative cardiac MRI-based assessment of CA using established and emerging techniques. EVIDENCE LEVEL: 5 TECHNICAL EFFICACY: Stage 3.

Simultaneous multi-parametric acquisition and reconstruction techniques in cardiac magnetic resonance imaging: Basic concepts and status of clinical development

Simultaneous multi-parametric acquisition and reconstruction techniques (SMART) are gaining attention for their potential to overcome some of cardiovascular magnetic resonance imaging's (CMR) clinical limitations. The major advantages of SMART lie within their ability to simultaneously capture multiple "features" such as cardiac motion, respiratory motion, T1/T2 relaxation. This review aims to summarize the overarching theory of SMART, describing key concepts that many of these techniques share to produce co-registered, high quality CMR images in less time and with less requirements for specialized personnel. Further, this review provides an overview of the recent developments in the field of SMART by describing how they work, the parameters they can acquire, their status of clinical testing and validation, and by providing examples for how their use can improve the current state of clinical CMR workflows. Many of the SMART are in early phases of development and testing, thus larger scale, controlled trials are needed to evaluate their use in clinical setting and with different cardiac pathologies.

Artificial intelligence in cardiac magnetic resonance fingerprinting

Magnetic resonance fingerprinting (MRF) is a fast MRI-based technique that allows for multiparametric quantitative characterization of the tissues of interest in a single acquisition. In particular, it has gained attention in the field of cardiac imaging due to its ability to provide simultaneous and co-registered myocardial T₁ and T₂ mapping in a single breath-held cardiac MRF scan, in addition to other parameters. Initial results in small healthy subject groups and clinical studies have demonstrated the feasibility and potential of MRF imaging. Ongoing research is being conducted to improve the accuracy, efficiency, and robustness of cardiac MRF. However, these improvements usually increase the complexity of image reconstruction and dictionary generation and introduce the need for sequence optimization. Each of these steps increase the computational demand and processing time of MRF. The latest advances in artificial intelligence (AI), including progress in deep learning and the development of neural networks for MRI, now present an opportunity to efficiently address these issues. Artificial intelligence can be used to optimize candidate sequences and reduce the memory demand and computational time required for reconstruction and post-processing. Recently, proposed machine learning-based approaches have been shown to reduce dictionary generation and reconstruction times by several orders of magnitude. Such applications of AI should help to remove these bottlenecks and speed up cardiac MRF, improving its practical utility and allowing for its potential inclusion in clinical routine. This review aims to summarize the latest developments in artificial intelligence applied to cardiac MRF. Particularly, we focus on the application of machine learning at different steps of the MRF process, such as sequence optimization, dictionary generation and image reconstruction.

Cardiac MRF using rosette trajectories for simultaneous myocardial T1, T2, and proton density fat fraction mapping

The goal of this work is to extend prior work on cardiac MR Fingerprinting (cMRF) using rosette k-space trajectories to enable simultaneous T₁, T₂, and proton density fat fraction (PDFF) mapping in the heart. A rosette trajectory designed for water-fat separation at 1.5T was used in a 2D ECG-triggered 15-heartbeat cMRF sequence. Water and fat specific T₁ and T₂ maps were generated from the cMRF data. A PDFF map was also retrieved using Hierarchical IDEAL by segmenting the rosette cMRF data into multiple echoes. The accuracy of rosette cMRF in T₁, T₂, and PDFF quantification was validated in the ISMRM/NIST phantom and an in-house built fat fraction phantom, respectively. The proposed method was also applied for myocardial tissue mapping of healthy subjects and cardiac patients at 1.5T. T₁, T₂, and PDFF values measured using rosette cMRF in the ISMRM/NIST phantom and the fat fraction phantom agreed well with the reference values. In 16 healthy subjects, rosette cMRF yielded T₁ values which were 80~90 ms higher than spiral cMRF and MOLLI. T₂ values obtained using rosette cMRF were ~3 ms higher than spiral cMRF and ~5 ms lower than conventional T₂-prep bSSFP method. Rosette cMRF was also able to detect abnormal T₁ and T₂ values in cardiomyopathy patients and may provide more accurate maps due to effective fat suppression. In conclusion, this study shows that rosette cMRF has the potential for efficient cardiac tissue characterization through simultaneous quantification of myocardial T₁, T₂, and PDFF.

Clinical evaluation of the Multimapping technique for simultaneous myocardial T1 and T2 mapping

The Multimapping technique was recently proposed for simultaneous myocardial T₁ and T₂ mapping. In this study, we evaluate its correlation with clinical reference mapping techniques in patients with a range of cardiovascular diseases (CVDs) and compare image quality and inter- and intra-observer repeatability. Multimapping consists of an ECG-triggered, 2D single-shot bSSFP readout with inversion recovery and T₂ preparation modules, acquired across 10 cardiac cycles. The sequence was implemented at 1.5T and compared to clinical reference mapping techniques, modified Look-Locker inversion recovery (MOLLI) and T₂ prepared bSSFP with four echo times (T₂bSSFP), and compared in 47 patients with CVD (of which 44 were analyzed). In diseased myocardial segments (defined as the presence of late gadolinium enhancement), there was a high correlation between Multimapping and MOLLI for native myocardium T₁ (r² = 0.73), ECV (r² = 0.91), and blood T₁ (r² = 0.88), and Multimapping and T₂bSSFP for native myocardial T₂ (r² = 0.80). In healthy myocardial segments, a bias for native T₁ (Multimapping = 1,116 ± 21 ms, MOLLI = 1,002 ± 21, P < 0.001), post-contrast T₁ (Multimapping = 479 ± 31 ms, MOLLI = 426 ± 27 ms, 0.001), ECV (Multimapping = 21.5 ± 1.9%, MOLLI = 23.7 ± 2.3%, P = 0.001), and native T₂ (Multimapping = 48.0 ± 3.0 ms, T₂bSSFP = 53.9 ± 3.5 ms, P < 0.001) was observed. The image quality for Multimapping was scored as higher for all mapping techniques (native T₁, post-contrast T₁, ECV, and T₂bSSFP) compared to the clinical reference techniques. The inter- and intra-observer agreements were excellent (intraclass correlation coefficient, ICC > 0.9) for most measurements, except for inter-observer repeatability of Multimapping native T₁ (ICC = 0.87), post-contrast T₁ (ICC = 0.73), and T₂bSSFP native T₂ (ICC = 0.88). Multimapping shows high correlations with clinical reference mapping techniques for T₁, T₂, and ECV in a diverse cohort of patients with different cardiovascular diseases. Multimapping enables simultaneous T₁ and T₂ mapping and can be performed in a short breath-hold, with image quality superior to that of the clinical reference techniques.

T2 mapping in myocardial disease: a comprehensive review

Cardiovascular magnetic resonance (CMR) is considered the gold standard imaging modality for myocardial tissue characterization. Elevated transverse relaxation time (T2) is specific for increased myocardial water content, increased free water, and is used as an index of myocardial edema. The strengths of quantitative T2 mapping lie in the accurate characterization of myocardial edema, and the early detection of reversible myocardial disease without the use of contrast agents or ionizing radiation. Quantitative T2 mapping overcomes the limitations of T2-weighted imaging for reliable assessment of diffuse myocardial edema and can be used to diagnose, stage, and monitor myocardial injury. Strong evidence supports the clinical use of T2 mapping in acute myocardial infarction, myocarditis, heart transplant rejection, and dilated cardiomyopathy. Accumulating data support the utility of T2 mapping for the assessment of other cardiomyopathies, rheumatologic conditions with cardiac involvement, and monitoring for cancer therapy-related cardiac injury. Importantly, elevated T2 relaxation time may be the first sign of myocardial injury in many diseases and oftentimes precedes symptoms, changes in ejection fraction, and irreversible myocardial remodeling. This comprehensive review discusses the technical considerations and clinical roles of myocardial T2 mapping with an emphasis on expanding the impact of this unique, noninvasive tissue parameter.

The Road Toward Reproducibility of Parametric Mapping of the Heart: A Technical Review

Parametric mapping of the heart has become an essential part of many cardiovascular magnetic resonance imaging exams, and is used for tissue characterization and diagnosis in a broad range of cardiovascular diseases. These pulse sequences are used to quantify the myocardial T₁, T₂, T2*, and T_1ρ relaxation times, which are unique surrogate indices of fibrosis, edema and iron deposition that can be used to monitor a disease over time or to compare patients to one another. Parametric mapping is now well-accepted in the clinical setting, but its wider dissemination is hindered by limited inter-center reproducibility and relatively long acquisition times. Recently, several new parametric mapping techniques have appeared that address both of these problems, but substantial hurdles remain for widespread clinical adoption. This review serves both as a primer for newcomers to the field of parametric mapping and as a technical update for those already well at home in it. It aims to establish what is currently needed to improve the reproducibility of parametric mapping of the heart. To this end, we first give an overview of the metrics by which a mapping technique can be assessed, such as bias and variability, as well as the basic physics behind the relaxation times themselves and what their relevance is in the prospect of myocardial tissue characterization. This is followed by a summary of routine mapping techniques and their variations. The problems in reproducibility and the sources of bias and variability of these techniques are reviewed. Subsequently, novel fast, whole-heart, and multi-parametric techniques and their merits are treated in the light of their reproducibility. This includes state of the art segmentation techniques applied to parametric maps, and how artificial intelligence is being harnessed to solve this long-standing conundrum. We finish up by sketching an outlook on the road toward inter-center reproducibility, and what to expect in the future.

Myocardial T1, T2, T2*, and fat fraction quantification via low-rank motion-corrected cardiac MR fingerprinting

Purpose

Develop a novel 2D cardiac MR fingerprinting (MRF) approach to enable simultaneous T1, T2, T2*, and fat fraction (FF) myocardial tissue characterization in a single breath‐hold scan.

Methods

Simultaneous, co‐registered, multi‐parametric mapping of T1, T2, and FF has been recently achieved with cardiac MRF. Here, we further incorporate T2* quantification within this approach, enabling simultaneous T1, T2, T2*, and FF myocardial tissue characterization in a single breath‐hold scan. T2* quantification is achieved with an eight‐echo readout that requires a long cardiac acquisition window. A novel low‐rank motion‐corrected (LRMC) reconstruction is exploited to correct for cardiac motion within the long acquisition window. The proposed T1/T2/T2*/FF cardiac MRF was evaluated in phantom and in 10 healthy subjects in comparison to conventional mapping techniques.

Results

The proposed approach achieved high quality parametric mapping of T1, T2, T2*, and FF with corresponding normalized RMS error (RMSE) T1 = 5.9%, T2 = 9.6% (T2 values <100 ms), T2* = 3.3% (T2* values <100 ms), and FF = 0.8% observed in phantom scans. In vivo, the proposed approach produced higher left‐ventricular myocardial T1 values than MOLLI (1148 vs 1056 ms), lower T2 values than T2‐GraSE (42.8 vs 50.6 ms), lower T2* values than eight‐echo gradient echo (GRE) (35.0 vs 39.4 ms), and higher FF values than six‐echo GRE (0.8 vs 0.3 %) reference techniques. The proposed approach achieved considerable reduction in motion artifacts compared to cardiac MRF without motion correction, improved spatial uniformity, and statistically higher apparent precision relative to conventional mapping for all parameters.

Conclusion

The proposed cardiac MRF approach enables simultaneous, co‐registered mapping of T1, T2, T2*, and FF in a single breath‐hold for comprehensive myocardial tissue characterization, achieving higher apparent precision than conventional methods.

Cartesian dictionary-based native T1 and T2 mapping of the myocardium

PURPOSE

To implement and evaluate a new dictionary-based technique for native myocardial T₁ and T₂ mapping using Cartesian sampling.

METHODS

The proposed technique (Multimapping) consisted of single-shot Cartesian image acquisitions in 10 consecutive cardiac cycles, with inversion pulses in cycle 1 and 5, and T₂ preparation (TE: 30 ms, 50 ms, and 70 ms) in cycles 8-10. Multimapping was simulated for different T₁ and T₂ , where entries corresponding to the k-space centers were matched to acquired data. Experiments were performed in a phantom, 16 healthy subjects, and 3 patients with cardiovascular disease.

RESULTS

Multimapping phantom measurements showed good agreement with reference values for both T₁ and T₂ , with no discernable heart-rate dependency for T₁ and T₂ within the range of myocardium. In vivo mean T₁ in healthy subjects was significantly higher using Multimapping (T₁ = 1114 ± 14 ms) compared to the reference (T₁ = 991 ± 26 ms) (p < 0.01). Mean Multimapping T₂ (47.1 ± 1.3 ms) and T₂ spatial variability (5.8 ± 1.0 ms) was significantly lower compared to the reference (T₂ = 54.7 ± 2.2 ms, p < 0.001; spatial variability = 8.4 ± 2.0 ms, p < 0.01). Increased T₁ and T₂ was detected in all patients using Multimapping.

CONCLUSIONS

Multimapping allows for simultaneous native myocardial T₁ and T₂ mapping with a conventional Cartesian trajectory, demonstrating promising in vivo image quality and parameter quantification results.

Simultaneous T1 , T2 , and T1ρ cardiac magnetic resonance fingerprinting for contrast agent-free myocardial tissue characterization

PURPOSE

To develop a simultaneous T₁ , T₂ , and T_1ρ cardiac magnetic resonance fingerprinting (MRF) approach to enable comprehensive contrast agent-free myocardial tissue characterization in a single breath-hold scan.

METHODS

A 2D gradient-echo electrocardiogram-triggered cardiac MRF sequence with low flip angles, varying magnetization preparation, and spiral trajectory was acquired at 1.5 T to encode T₁ , T₂ , and T_1⍴ simultaneously. The MRF images were reconstructed using low-rank inversion, regularized with a multicontrast patch-based higher-order reconstruction. Parametric maps were generated and matched in the singular value domain to extended phase graph-based dictionaries. The proposed approach was tested in phantoms and 10 healthy subjects and compared against conventional methods in terms of coefficients of determination and best fits for the phantom study, and in terms of Bland-Altman agreement, average values and coefficient of variation of T₁ , T₂ , and T_1⍴ for the healthy subjects study.

RESULTS

The T₁ , T₂ , and T_1⍴ MRF values showed excellent correlation with conventional spin-echo and clinical mapping methods in phantom studies (r² > 0.97). Measured MRF values in myocardial tissue (mean ± SD) were 1133 ± 33 ms, 38.8 ± 3.5 ms, and 52.0 ± 4.0 ms for T₁ , T₂ and T1_⍴ , respectively, against 1053 ± 47 ms, 50.4 ± 3.9 ms, and 55.9 ± 3.3 ms for T₁ modified Look-Locker inversion imaging, T₂ gradient and spin echo, and T_1⍴ turbo field echo, respectively.

CONCLUSION

A cardiac MRF approach for simultaneous quantification of myocardial T₁ , T₂ , and T_1ρ in a single breath-hold MR scan of about 16 seconds has been proposed. The approach has been investigated in phantoms and healthy subjects showing good agreement with reference spin echo measurements and conventional clinical maps.

Simultaneous comprehensive liver T1 , T2 , T 2 ∗ , T1ρ , and fat fraction characterization with MR fingerprinting

PURPOSE

To develop a novel simultaneous co-registered T₁ , T₂ , T 2 ∗ , T_1ρ , and fat fraction abdominal MR fingerprinting (MRF) approach for fully comprehensive liver-tissue characterization in a single breath-hold scan.

METHODS

A gradient-echo liver MRF sequence with low fixed flip angle, multi-echo radial readout, and varying magnetization preparation pulses for multiparametric encoding is performed at 1.5 T. The T 2 ∗ and fat fraction are estimated from a graph/cut water/fat separation method using a six-peak fat model. Water/fat singular images obtained are then matched to an MRF dictionary, estimating water-specific T₁ , T₂ , and T_1ρ . The proposed approach was tested in phantoms and 10 healthy subjects and compared against conventional sequences.

RESULTS

For the phantom studies, linear fits show excellent coefficients of determination (r² > 0.9) for every parametric map. For in vivo studies, the average values measured within regions of interest drawn on liver, spleen, muscle, and fat are statistically different from the reference scans (p < 0.05) for T₁ , T₂ , and T_1⍴ but not for T 2 ∗ and fat fraction, whereas correlation between MRF and reference scans is excellent for each parameter (r² > 0.92 for every parameter).

CONCLUSION

The proposed multi-echo inversion-recovery, T₂ , and T_1⍴ prepared liver MRF sequence presented in this work allows for quantitative T₁ , T₂ , T 2 ∗ , T_1⍴ , and fat fraction liver-tissue characterization in a single breath-hold scan of 18 seconds. The approach showed good agreement and correlation with respect to reference clinical maps.