Dual-column capillary microextraction (CME) combined with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) for the speciation of arsenic in human hair extracts

A novel zwitterionic magnetic nanocomposite developed for non-invasive speciation analysis of inorganic chromium

3-(2-Aminoethylamino)propyltriethoxysilane and carboxyethylsilanetriol sodium salt were grafted on silica-coated Fe3O4 nanoparticles via sol-gel process to prepare novel amine- and carboxyl-bifunctionalized magnetic nanocomposites (SMNPs-(NH2 + COOH)). After well characterized, this doubly functionalized material was used as magnetic solid-phase extraction (MSPE) adsorbent to separate and enrich inorganic chromium species followed by inductively coupled plasma-mass spectrometry detection. The optimization of MSPE operation parameters including pH was conducted. It is reasonably elucidated that the adsorption mechanisms of zwitterionic SMNPs-(NH2 + COOH) towards chromium species are electrostatic and/or coordination interactions. Cr(VI) and Cr(III) can be adsorbed around pH 3.0 and around 10.0 respectively with strong anti-interference ability not only from other co-existing ions but also from the two labile species each other, and eluted by dilute nitric acid solution. With a 15-fold enrichment factor, the limits of detection of Cr(VI) and Cr(III) were 0.008 and 0.009 μg L-1, respectively, profiting from the maximum adsorption capacities of 7.52 and 6.11 mg g-1. The just one magnetic extraction matrix based speciation scheme possesses excellent convenience and friendliness to Cr(VI) and Cr(III) without any oxidation or reduction prior to capture of these two species. This protocol has been successfully applied to the speciation analysis of inorganic chromium in real-world environmental water samples.

A combination approach using two functionalized magnetic nanoparticles for speciation analysis of inorganic arsenic

Mercapto- and amino-functionalized magnetic nanoparticles, Fe₃O₄@SiO₂@MPTMS (SMNPs-MPTMS) and Fe₃O₄@SiO₂@APTES (SMNPs-APTES), have been applied as magnetic solid-phase extraction (MSPE) sorbents to directly extract arsenite (As(III)) and arsenate (As(V)) respectively, followed by inductively coupled plasma-mass spectrometry (ICP-MS) detection. Various MSPE parameters were optimized including dose of magnetic adsorbent, pH of sample solution, loading and elution conditions of analytes, adsorption capacity and reusability of SMNPs-MPTMS and SMNPs-APTES for As(III) and As(V) respectively. Under the optimized MSPE conditions, this combined scheme possesses excellent selectivity and strong anti-interference ability without any oxidation or reduction prior to capture of these two species. It is found that with a 25-fold enrichment factor, the limits of detection of As(III) and As(V) were 23.5 and 10.5 ng L^-1, respectively. To verify the reliability of the proposed protocol, a certified reference material of environmental water was analyzed, and the results for inorganic arsenic species were in close agreement with the certified values. The applicability of the combination strategy for speciation analysis of inorganic arsenic was evaluated in spiked tap, river, lake and rain water samples. Good recoveries of 89%-96% and 90%-102% were achieved for As(III) and As(V), respectively, with the relative standard deviation ranges of 3.2%-8.0% and 2.5%-7.6%. Through the characterization of functionalized magnetic nanoparticles and the optimization of MSPE experiment, it is confirmed that the existence of mercapto and amino groups on SMNPs-MPTMS and SMNPs-APTES sorbents are responsible for the extraction of As(III) and As(V), respectively, via coordination and electrostatic interactions.

Trends in microextraction approaches for handling human hair extracts - A review

The complementary role of hair in testing scenarios has expanded across the spectrum of toxicological and clinical monitoring investigations and, over the last 20 years, hair analysis has gained increasing attention and recognition. Moreover, a great deal of attention has been paid to the miniaturisation of extraction procedures, minimising/eliminating toxic organic solvents consumption, making them user-friendly and rapid, in addition to maximising extraction efficiency. The aim of this work is to provide a critical review of the advances observed over the last 5 years in the use of miniaturised approaches for sample clean-up and drug pre-concentration in hair analysis. There have been major improvements in some well-established microextraction approaches, such as liquid phase microextraction, mainly through the use of supramolecular and ionic liquids. In addition, new developments have also been reported in solid phase microextraction, driven by d-SPE applications. In the last 5 years, a total of 69 articles have been published using some type of microextraction technique for hair specimens, thus justifying the relevance of a critical review of innovations, improvements and trends related to these miniaturised approaches for sample preparation.

A Wide Bandgap Ag/MgO@Fe3O4 Nanocomposite as Magnetic Sorbent for Cd(II) in Water Samples

Background:

The magnetic nanocomposites are very important as a reusable sorbents for the extraction of Cd(II) and other toxic metals from water samples.

Methods:

The Ag/MgO@Fe3O4 nanocomposite was synthesized by the coprecipitation method and characterized by the XRD, EDX, SEM, UV-vis spectroscopy and FTIR. This nanocomposite was used to extract Cd(II) from water samples prior to its quantitative analysis with FAAS. Different variables, i.e. pH, temperature, amount of nanosorbent, adsorption/desorption and dilution were optimized.

Results:

The method was successfully applied to determine Cd(II) in real water samples with excellent recoveries (98%). The present method has lower detection (0.29) and quantification limit (0.97 ng mL-1).

Conclusions:

The Ag/MgO@Fe3O4 nanocomposite based magnetic extraction is a simple, fast, reproducible, less expansive and efficient technique for the Cd(II) extraction in water samples. The developed sorbent can be recycled and reused (20 times).

On the Use of Hair Analysis for Assessing Arsenic Intoxication

Correlations between the concentrations of arsenic in scalp hair and in drinking water as well as in blood and/or urine have been reported. These correlations clearly show exposure–absorption–excretion relationships. In addition, arsenic metabolites such as monomethylarsonic acid and dimethylarsinic acid have been identified and quantified in these tissues and fluids, leaving little doubt that elevated levels of arsenic in the hair can reflect systemic arsenic intoxication. Consequently, hair analysis has potential merit as a screening procedure for poisoning by arsenic. However, questions regarding the exogenous versus the endogenous deposition of arsenic in the hair, and uncertainties about the normal level of arsenic in the hair remain unresolved. Pending their resolution, the determination of arsenic in hair should remain a screening tool, and clinical signs and symptoms should be employed to complete the diagnosis of arsenic poisoning.

Development of a new FT-IR method for the determination of iron oxide. Optimization of the synthesis of suitable magnetic nanoparticles as sorbent in magnetic solid phase extraction

Optimized 13 nm MNPs with 70.5% iron, determined by a simple FT-IR strategy for routine Fe₃O₄ determination in solid MNPs.

TiO₂ nanoparticles functionalized monolithic capillary microextraction online coupled with inductively coupled plasma mass spectrometry for the analysis of Gd ion and Gd-based contrast agents in human urine

In this work, a novel method of TiO2 nanoparticles (NPs) functionalized monolithic capillary microextraction (CME) online coupling with inductively coupled plasma mass spectrometry (ICPMS) was developed for the sequential determination of Gd(3+) and Gd-based contrast agents in human urine samples. The monolithic capillary was prepared by embedding anatase TiO2 NPS in the poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EDMA) framework. The Gd(3+) and Gd-based contrast agents (such as gadolinium-diethylene triamine pentaacetic acid (Gd-DTPA) and Gd-DTPA-bismethylamide (Gd-DTPA-BMA)) display different adsorption behaviors on the prepared monolithic capillary which possesses the adsorption properties of both anatase TiO2 NPS and poly(MAA-EDMA) monolith. Under the optimized conditions, the limits of detection (LODs) were found to be 3.6, 3.2, and 4.5 ng L(-1) for Gd(3+), Gd-DTPA, and Gd-DTPA-BMA, respectively, which are the lowest up to date. The enrichment factor was 25-fold with the sample throughput of 5 h(-1). The proposed method was validated by the analysis of Gd(3+) and Gd-DTPA in the healthy human urine samples as well as Gd(3+) and Gd-DTPA-BMA in patient urine samples. It was found that only a small amount of the free Gd(3+) was released from Gd-DTPA-BMA, and accurate results could be obtained since no oxidation/reduction or subtraction is involved in this method. This method is simple, sensitive, and rapid and provides a very attractive nonchromatography strategy for the speciation of Gd(3+) and Gd-based contrast agents in urine samples.

Application of functionalized magnetic nanoparticles in sample preparation

Functionalized magnetic nanoparticles have attracted much attention in sample preparation because of their excellent performance compared with traditional sample-preparation sorbents. In this review, we describe the application of magnetic nanoparticles functionalized with silica, octadecylsilane, carbon-based material, surfactants, and polymers as adsorbents for separation and preconcentration of analytes from a variety of matrices. Magnetic solid-phase extraction (MSPE) techniques, mainly reported in the last five years, are presented and discussed.