Determination of paraquat and diquat in human body fluids by high-performance liquid chromatography/tandem mass spectrometry

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Diagnostic Aspects of Paraquat in the Forensic Toxicology: A Systematic Review

Background

Paraquat (N, N-dimethyl-4,4-bipyridinium dichloride) is a nonselective, fast-acting, and contact chemical herbicide used extensively for weed control. It has high acute oral toxicity, the ability to accumulate in the lungs, and a high potential for pulmonary fibrosis after its intoxication. The present systematic review focuses on evaluating diagnostic aspects of paraquat (PQ) in forensic toxicology.

Methods

Evaluation of the literature according to the following criteria: only human studies published from February 1971 to March 2022 which are in English on the following databases: 1) Medline/PubMed/MeSH search words: ((Methyl viologen [Title/Abstract]) OR (paraquat [MeSH Terms])) AND (forensic [Title/Abstract]); 2) Scopus Keywords related to the study aim included forensic toxicology, paraquat, Methyl viologen; 3) Web of Science. Keywords related to the study aim included forensic toxicology, paraquat, and Methyl viologen.

Results

Thirty full-text articles were included. The results of our review indicate plasma and urine are more used for identifying PQ, and liver, lung, and gastric fluid are important in postmortem cases. Preparation methods, including liquid-liquid extraction (LLE), solid-phase extraction, and acetonitrile-precipitated protein, are often required for removing interfering substances. Chromatographic methods, among other analytical techniques, are more sensitive, specific, and applicable.

Conclusion

Our review suggests that plasma, urine, and lungs should be prioritized in sampling. Solid-phase extraction has better recovery than LLE in many samples. Colorimetric methods are not used much today, and radioimmunoassay (RIA) has limited application despite its high sensitivity. Gas and liquid chromatography methods appear to offer the best approach for the analysis of PQ.

Rapid identification and quantification of diquat in biological fluids within 30 s using a portable Raman spectrometer

Rapid detection of diquat (DQ) is essential in clinical diagnosis and rescue. Here, we developed a fast, simple-yet-practical detection strategy for the reliable identification and quantification of DQ in biological fluids. Based on surface-enhanced Raman spectroscopy (SERS), point-of-care detection was realized under the acidic condition with gold nanoparticles as the substrate. Under optimal experimental conditions, the detection limits of the strategy were 17.5 ppb and 1.99 ppm in human urine and gastric juice, respectively. High specificity and selectivity of the SERS strategy were demonstrated using common pesticides and coexisting biological substances. The method was also used to detect biofluids from 5 patients and urine samples from 10 healthy volunteers. The results were in high agreement with spectrophotometric and clinical liquid chromatography-mass spectrometry methods. The volume of urine samples required for this technique is merely 20 μL, and no preparation of the samples is required. Compared to traditional methods used in clinical settings, SERS-based methods are capable of real-time measurements that accurately provide rapid detection and response in non-laboratory settings, with great potential for on-site and point-of-care testing.

HPLC-MS/MS determination and the postmortem distribution or postmortem redistribution of paraquat and its metabolites in four fatal intoxication cases

HPLC-MS/MS analysis and postmortem distribution or postmortem redistribution of paraquat and its two metabolites in poisoning death cases were reported. Paraquat, monoquat, and paraquat monopyridone were extracted from the sample with acetonitrile or methanol, respectively, detected by ZORBAX HILIC Plus (4.6 × 100 mm, 3.5 μm) chromatographic column, with 0.1 % formic acid aqueous solution - 0.1 % formic acid acetonitrile solution (v/v) as mobile phase. Paraquat, monoquat, and paraquat monopyridone had a good linear relationship within the range of 10-1000, 1-400, and 1-1000 ng/mL (or g), the correlation coefficient (r) were all ≥ 0.9996. Their detection limits were lower than 1 ng/mL (or g). The detection accuracy was 91.25∼113.44 %. The intra-day and inter-day precision were 1.51-3.99 % and 1.92-4.93 %, respectively. This method was used to detect and analyze four rare paraquat poisoning cases. The distribution of paraquat, monoquat, and paraquat monopyridone is uneven, which is relatively high in the heart, blood, lung, and kidney. Heart blood/Peripheral blood ratio of paraquat, monoquat, paraquat monopyridone concentration in two poisoned cases were 1.4, 2.0, 1.5 and 1.9, 1.3, 1.2, which showed a location dependent postmortem redistribution. This is the first time that HPLC-MS/MS and the postmortem distribution or postmortem redistribution of paraquat metabolites in poisoned death cases have been reported. This research provides scientific basis for forensic identification of paraquat poisoning cases and extraction of biological specimen.

LC-MS/MS methods for the determination of 30 quaternary ammonium compounds including benzalkonium and paraquat in human serum and urine

Benzalkyldimethylammonium (or benzalkonium; BACs), alkyltrimethylammonium (ATMACs), and dialkyldimethylammonium compounds (DDACs) have been widely used for over six decades as disinfectants, especially during the COVID-19 pandemic. Here we describe methods for the determination of 7 BACs, 6 ATMACs, 6 DDACs, 8 BAC metabolites, and the structurally similar quaternary ammonium compound (QAC) herbicides diquat, paraquat, and difenzoquat in human serum and urine using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The methods were optimized using isotopically labelled internal standards and solid-phase extraction with weak cation-exchange cartridges. We separated diquat and paraquat chromatographically using a mixed-mode LC column, and BACs, ATMACs, DDACs, difenzoquat, and BAC metabolites using reversed-phase (C8 and C18) LC columns. Method limits of detection (MLODs) and quantification (MLOQs) were 0.002-0.42 and 0.006-1.40 ng/mL, respectively. Recoveries of all analytes fortified at 1, 5, and 20 ng/mL concentrations in serum and urine matrices were 61-129%, with standard deviations of 0-20%. Repeated analysis of similarly fortified serum and urine samples yielded intra-day and inter-day variations of 0.22-17.4% and 0.35-17.3%, respectively. Matrix effects for analytes spiked into serum and urine matrices ranged from -27% to 15.4%. Analysis of real urine and serum samples revealed the presence of several QACs in human serum. Although no parent BACs were found in urine, we detected, for the first time, several ω-hydroxy and ω-carboxylic acid metabolites of BACs at average concentrations in the range of 0.05-0.35 ng/mL. The developed method is suitable for application in large-scale biomonitoring of human exposure to QACs and their metabolites in human serum and urine.

Ready-to-use paraquat sensor using a graphene-screen printed electrode modified with a molecularly imprinted polymer coating on a platinum core

We propose the fabrication of a novel ready-to-use electrochemical sensor based on a screen-printed graphene paste electrode (SPGrE) modified with platinum nanoparticles and coated with a molecularly imprinted polymer (PtNPs@MIP) for sensitive and cost-effective detection of paraquat (PQ) herbicide. Successive coating of the PtNPs surface with SiO₂ and vinyl end-groups formed the PtNPs@MIP. Next, we terminated the vinyl groups with a molecularly imprinted polymer (MIP) shell. MIP was attached to the PtNPs cores using PQ as the template, methacrylic acid (MAA) as the monomer, ethylene glycol dimethacrylate (EGDMA) as the cross-linker, and 2,2'-azobisisobutyronitrile (AIBN) as the initiator. Coating the SPGrE surface with PtNPs@MIP furnished the PQ sensor. We studied the electrochemical mechanism of PQ on the MIP sensor using cyclic voltammetry (CV) experiments. The PQ oxidation current signal appears at -1.08 V and -0.71 V vs. Ag/AgCl using 0.1 M potassium sulfate solution. Quantitative analysis was performed by anodic stripping voltammetry (ASV) using a deposition potential of -1.4 V for 60 s and linear sweep voltammetric stripping. The MIP sensor provides linearity from 0.05 to 1000 μM (r² = 0.999), with a lower detection limit of 0.02 μM (at -0.71 V). The compact imprinted sensor gave a highly sensitive and selective signal toward PQ. The ready-to-use MIP sensor can provide an alternative approach to the determination of paraquat residue on vegetables and fruits for food safety applications.

Electrochemiluminescence response of a benzouril-constructed electrode to bipyridyl herbicides

An electrochemiluminescence sensor with modification of macrocyclic benzo[6]uril on the surface of a glass carbon electrode was achieved, which has been applied for the quantitative analysis of paraquat and diquat.

Clinical screening of paraquat in plasma samples using capillary electrophoresis with contactless conductivity detection: Towards rapid diagnosis and therapeutic treatment of acute paraquat poisoning in Vietnam

The employment of a purpose-made capillary electrophoresis (CE) instrument with capacitively coupled contactless conductivity detection (C⁴D) as a simple and cost-effective solution for clinical screening of paraquat in plasma samples for early-stage diagnosis of acute herbicide poisoning is reported. Paraquat was determined using an electrolyte composed of 10mM histidine adjusted to pH 4 with acetic acid. A detection limit of 0.5mg/L was achieved. Good agreement between results from CE-C⁴D and the confirmation method (HPLC-UV) was obtained, with relative errors for the two pairs of data better than 20% for 31 samples taken from paraquat-intoxicated patients. The results were used by medical doctors for identification and prognosis of acute paraquat poisoning cases. The objective of the work is the deployment of the developed approach in rural areas in Vietnam as a low-cost solution to reduce the mortality rate due to accidental or suicidal ingestion of paraquat.

Quantification of paraquat in postmortem samples by gas chromatography-ion trap mass spectrometry and review of the literature

Paraquat (PQ) is an herbicide implicated in numerous fatalities, mainly caused by voluntary ingestion. Several methods have been used to quantify PQ in plasma and urine samples of intoxicated humans as a predictor of clinical outcome. There is no validated method for the analysis of PQ in postmortem samples. Therefore, the aim of this study was to develop an analytical method, using gas chromatography-ion trap mass spectrometry (GC-IT/MS) after solid-phase extraction, to quantify PQ in postmortem samples, namely in whole blood, urine, liver, lung and kidney, to cover the routes of distribution, accumulation and elimination of PQ. The method proved to be selective as there were no interferences of endogenous compounds with the same retention time as PQ and ethyl paraquat (internal standard). The regression analysis for PQ was linear in the range 0-10 µg/mL. The detection limits ranged from 0.0076 µg/mL for urine to 0.047 µg/mL for whole blood, and the recoveries were suitable for forensic analysis. The proposed GC-IT/MS method provided an accurate and simple assay with adequate precision and recovery for the quantification of PQ in postmortem samples. The proof of applicability was performed in two fatal PQ intoxications. A review of the analytical methods for the determination of quaternary ammonium herbicides is also provided for a better understanding of the presently available techniques.

Travelling wave ion mobility mass spectrometry of 5-aminolaevulinic acid, porphobilinogen and porphyrins

RATIONALE

Human porphyrias, diseases caused by enzyme defects in haem biosynthesis, are characterised by the excessive production, accumulation and excretion of porphyrins and/or 5-aminolaevulinic acid (ALA) and porphobilinogen (PBG). A method for the simultaneous separation, detection and identification of ALA, PBG and porphyrins would greatly facilitate the screening and diagnosis of porphyrias. Such a method would also be invaluable for the biochemical study of the haem, chlorophyll and corrin pathways.

METHODS

An aqueous mixture containing ALA, PBG and type I isomer porphyrins was diluted with acetonitrile and infused (10 μL/min) into a Waters Synapt G2 high-definition mass spectrometer, equipped with a Z-Spray electrospray ionisation (ESI) source. Mass spectra were acquired in positive ionisation mode and the optimised ion mobility spectrometry (IMS) conditions were as follows: IMS wave height (V), 40; IMS wave velocity (m/s), 648; IMS gas flow (mL/min) 90.40; helium gas flow (mL/min), 182.60.

RESULTS

The IMS drift-time increased with increasing ion mass in the order of ALA, PBG, mesoporphyrin, coproporphyrin I, penta-, hexa- and heptacarboxylic acid porphyrin I and uroporphyrin I. The ESI-IMS-MS spectra shows that PBG could form two different positively charged ions by protonation [M+H](+) , m/z 227, or deprotonation [M - H](+) , m/z 225. The protonated PBG (m/z 227) easily eliminated ammonia in source and the fragment ion (m/z 210) was monitored instead. Doubly charged ions of porphyrins having different drift times from the protonated singly charged molecules were observed in high abundance, providing further structural characterisation.

CONCLUSIONS

We have shown, for the first time, an analytical method capable of simultaneously separating haem biosynthetic intermediates and metabolites, for a potential rapid clinical screening method for the porphyrias. IMS-MS allowed the separation of doubly charged porphyrin ions, which will be advantageous for the analysis of natural and synthetic tetrapyrrole compounds, while reducing the misinterpretation of contaminants.

Simple and sensitive liquid chromatography-tandem mass spectrometry methods for quantification of paraquat in plasma and urine: application to experimental and clinical toxicological studies

Simple, sensitive and specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods have been developed and validated for quantification of paraquat (PQ) in plasma and urine. Plasma and urine sample preparation were carried out by one-step protein precipitation using cold acetonitrile (-20 to -10 °C). After centrifugation, an aliquot of 10 μL of supernatant was injected into a Kinetex™ hydrophilic interaction chromatography (HILIC) column with a KrudKatcher™ Ultra in-line filter. The chromatographic separation was achieved using the mobile phase mixture of 250 mM ammonium formate (with 0.8% aqueous formic acid) in water and acetonitrile at a flow rate of 0.3 mL/min. Detection was performed using an API2000 triple quadrupole tandem mass spectrometer in multiple reaction monitoring (MRM) mode via an electrospray ionization (ESI) source. The calibration curve was linear over the concentration range of 10-5000 ng/mL, with an LLOQ of 10 ng/mL. The inter- and intra-day precision (% R.S.D.) were <8.5% and 6.4% for plasma and urine, respectively with the accuracies (%) within the range of 95.1-102.8%. PQ in plasma and urine samples was stable when stored at -70 °C for three freeze-thaw cycles. The methods were successfully applied to determine PQ concentration in rat and human samples.

Liquid chromatographic-electrospray mass spectrometric determination of 1-methyl-4-phenylpyridine (MPP+) in discrete regions of murine brain

1-Methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) is widely used as a neurotoxin in several models of Parkinson's disease in mice. MPTP is metabolized to 1-methyl-4-phenylpyridinium (MPP(+)), which is a mitochondrial toxicant of central dopamine (DA) neurons. There are species, strain, and age differences in sensitivity to MPTP. Simultaneous measurement of the MPTP active metabolite MPP(+) and dopamine (DA) in the brain would be helpful in mechanistic studies of this neurotoxin. The objective of this study was to develop a liquid chromatography-mass spectrometry (LC/MS) method for analysis of MPTP and MPP(+) in brain tissue and correlate these in the same sample with changes in DA measured via HPLC coupled with electrochemical detection. Twenty-five C57BL/6J7 8-week old female mice were used in the study. Mice were given a single subcutaneous injection of MPTP (20 mg/kg) and were sacrificed 1, 2, 4, or 8 h later. Zero time control mice received an injection of 0.9% normal saline (10 ml/kg) and were killed 1 h later. Brains were rapidly harvested and quickly frozen, and microdissected brain regions were placed in 0.1 M phosphate-citric acid buffer containing 20% methanol (pH 2.5). A new LC/MS method was successfully developed that utilized selected reaction monitoring (SRM) of MPP(+) m/z 170→127, 170→128, and 170→154 fragmentation for quantitation and area ratios (m/z 127)/(m/z 128) and (m/z 154)/(128) for identity confirmation. A similar SRM strategy from m/z 174 was unable to detect any significant levels of MPTP down to 0.4 ppb. According to this method, MPP(+) was detected in the nucleus accumbens (NA) and the striatum (ST), with the levels in the NA being 3-times higher than those in the ST. The advantage of this approach is that the tissue buffer used in this procedure allowed concurrent measurement of striatal DA, thus enabling direct correlation between accumulation of tissue MPP(+) and depletion of DA concentrations in discrete regions of the brain.

Enzymatic-spectrophotometric determination of paraquat in urine samples: a method based on its toxic mechanism

Paraquat is a broad-spectrum contact herbicide that has been encountered worldwide in several cases of accidental, homicidal, and suicidal poisonings. The pulmonary toxicity of this compound is related to the depletion of NADPH in the pneumocytes, which is continuously consumed by the reduction/oxidation of paraquat and reductase enzyme systems in the presence of O(2) (redox cycling). Based on this mechanism, an enzymatic-spectrophotometric method was developed for the determination of paraquat in urine samples. The velocity of NADPH consumption was monitored at 340 nm, every 10 s during 15 min. The velocity of NADPH oxidation correlated with the paraquat levels found in samples. The enzymatic-spectrophotometric method showed to be sensitive, making possible the detection of paraquat in urine samples at concentrations as low as 0.05 mg/L.

Method for measurement of the quaternary amine compounds paraquat and diquat in human urine using high-performance liquid chromatography-tandem mass spectrometry

We have developed a highly selective and sensitive analytical method to quantify paraquat and diquat by use of high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The sample preparation includes solid phase extraction that uses weak cation exchange cartridges. These highly charged dual quaternary amines were not retained by standard reversed phase columns, but they could be adequately separated through HPLC with a HILIC column. The detection was carried out with a triple quadrupole mass spectrometer with an electrospray ionization probe in positive ion mode in multiple reaction monitoring. Repeated analysis in human urine samples spiked with low (5 ng/ml), medium (15 ng/ml), and high (30 ng/ml) concentrations of the analytes yielded relative standard deviations of less than 9%. The extraction efficiencies ranged from 77.7% to 94.2%. The limits of detection were in the range of 1 ng/ml.

Determination of quaternary ammonium herbicides in soils. Comparison of digestion, shaking and microwave-assisted extractions

Very challenging analytical problems arise from the continuous introduction in agriculture of chemical pesticides. Particularly, diquat (DQ), paraquat (PQ) and difenzoquat (DF) are a difficult group of quaternary ammonium herbicides to analyze. This article reviews and addresses the most relevant analytical methods for determining the selected herbicides in soil. We discuss and critically evaluate procedures, such as digestion-based methods, shaking extraction and microwave-assisted extraction (MAE). Clean-up of extracts was performed by solid-phase extraction (SPE) using silica cartridges. Detection of these herbicides was carried out by liquid chromatography (LC) coupled to UV detection and mass spectrometry (MS) as confirmatory technique. Recoveries ranged from 98% to 100% by digestion, from no recovered to 61% by shaking, and from 102% to 109% by MAE with estimated quantification limits between 1.0 microg/kg and 2.0 microg/kg by digestion and 5.0 mug/kg and 7.5 microg/kg by MAE using LC/MS-MS as detection technique. The recoveries obtained under the optimum conditions are compared and discussed with those obtained from digestion extraction and MAE.

Quantitative determination of paraquat in meconium by sodium borohydride-nickel chloride chemical reduction and gas chromatography/mass spectrometry (GC/MS)

The objective of this study was to develop a procedure for the GC/MS assay of paraquat in meconium as a biomarker of fetal exposure to paraquat. The method involved a sodium borohydride-nickel chloride reduction procedure, liquid-liquid extraction of the perhydrogenated product, concentration, and GC/MS assay. The method demonstrated good overall recovery (102.56%) with %CV (inter-assay) of less than 13%, and a limit of detection of 0.0156microg/g. Analysis of meconium samples from a study population in the Philippines (n=70) showed a 2.8% prevalence of fetal exposure to paraquat.

A mixed-mode liquid chromatography-tandem mass spectrometric method for the determination of cytarabine in mouse plasma

A novel mixed-mode high performance liquid chromatographic system (HPLC) interfaced with an atmospheric pressure chemical ionization (APCI) source and a tandem mass spectrometer (MS/MS) was developed for the determination of cytarabine (ara-C) in mouse plasma to support pharmacodynamic studies. The mixed-mode reversed-phase ion-exchange chromatography column was adapted for sufficient retention and separation of a small and polar analyte. The impact of the mobile phase composition on both chromatographic separation and the ionization efficiency of the test compound in the positive mode was investigated. The potential of ionization suppression from endogenous biological matrices on the mixed-mode LC-APCI/MS/MS method was evaluated using the post-column infusion technique. Furthermore, the feasibility of using the mixed-mode HPLC-MS/MS method for the determination of the plasma concentrations of cytarabine in mice was demonstrated by comparing those obtained by the ion-pairing HPLC-MS/MS method.

Gas chromatographic-mass spectrometric method for the determination of the herbicides paraquat and diquat in plasma and urine samples

In the present work, a method was developed and optimized aiming to determinate the herbicides paraquat (PQ) and diquat (DQ) in human plasma and urine samples. An initial procedure of chemical reduction of the analytes by adding NaBH4 directly in the buffered samples (pH 8.0) was performed. This procedure was necessary to convert the quaternary ammonium substances into more volatile compounds for gas chromatographic analysis. The reduction compounds were extracted with C18 cartridges (solid-phase extraction). Ethyl paraquat (EPQ) was used as internal standard (IS). Gas chromatography-mass spectrometry (GC-MS) was used to identify and quantify the analytes in selected ion monitoring (SIM) mode. The limits of detection were 0.05 mg/l for both PQ and DQ. By using the weighted least squares linear regression (1/x1/2 for plasma and 1/y for urine), the accuracy of the analytical method was improved at the lower end of the calibration curve (from 0.1 to 50 mg/l; r>0.98). This method can be readily utilized as an important tool to confirm the suspicion of PQ and/or DQ poisoning and evaluate the extent of the intoxication.

Determination of chlorhexidine (CHD) and nonylphenolethoxylates (NPEOn) using LC-ESI-MS method and application to hemolyzed blood

Rapid and reliable methods for identification of chlorhexidine (CHD) and nonylphenolethoxylates (NPEOn) in antiseptic and hemolyzed blood using electrospray ionization mass spectrometry (ESI-MS) were developed. Fragmental analysis provides accurate evidence for the presence of CHD in the samples. For the determination of CHD in hemolyzed blood, the method was also developed using LC-ESI-MS. Linearity of calibration curve was obtained over the concentration range of 0.1-11 microg/mL with residuals from -4.3 to 6.7%. We applied the methods to the case of suicidal injection of antiseptic and successfully detected CHD and NPEOn from hemolyzed blood. The CHD concentration was 352 microg/mL.