Biosorption of copper by yeast, Loddermyces elongisporus, isolated from industrial effluents: its potential use in wastewater treatment

Copper Tolerance of Novel Rhodotorula sp. Yeast Isolated from Gold Mining Ore in Gia Lai, Vietnam

In this study, twenty-five yeast strains were isolated from soil samples collected in the gold mining ore in Gia Lai, Vietnam. Among them, one isolate named GL1T could highly tolerate Cu2+ up to 10 mM, and the isolates could also grow in a wide range of pH (3-7), and temperature (10-40 °C). Dried biomass of GL1 was able to remove Cu2+ effectively up to 90.49% with a maximal biosorption capacity of 18.1 mg/g at pH 6, temperature 30 °C, and incubation time 60 min. Sequence analysis of rDNA indicated this strain was closely related to Rhodotorula mucilaginosa but with 1.53 and 3.46% nucleotide differences in the D1/D2 domain of the 28S rRNA gene and the ITS1-5.8S rRNA gene-ITS2 region sequence, respectively. Based on phylogenetic tree analysis and the biochemical characteristics, the strain appears to be a novel Rhodotorula species, and the name Rhodotorula aurum sp. nov. is proposed. This study provides us with more information about heavy metal-tolerant yeasts and it may produce a new tool for environmental control and metal recovery operations.

Optimising Wastewater Treatment: Acinetobacter sp. IrC1 as a potential multi-resistant bacterium for copper accumulation and dyes decolourisation

Improper disposal of waste containing copper and dye is an environmental issue that must be resolved immediately due to its harmful, non-degradable and toxic properties. Bioremediation efficiency can improve by cultivating copper and dye multi-resistant bacteria to remove various pollutant types simultaneously. This study aims at establishing the multi-resistance of Acinetobacter sp. IrC1 to copper and dyes. The effects of copper concentration on growth were determined using a spectrophotometer, while accumulation was analysed using an atomic absorption spectrophotometer. Bacteria-mediated dye decolourisation dyes were observed based on clear zone formation around bacterial colonies, while decolourisation percentage was calculated using a spectrophotometer. Results demonstrate that Acinetobacter sp. IrC1 resisted up to 8 mM CuSO4 and accumulated up to 292.93 mg/g dry weight of copper cells. Acinetobacter sp. IrC1 isolates were also resistant to 500 ppm Methylene Blue, Malachite Green, Congo Red, Mordant Orange, Reactive Black, Direct Yellow, Reactive Orange, Remazol, Wantex Red and Wantex Yellow dye, successfully removing up to 68.35% and 79.50% Methylene Blue and Basic Fuchsine in a medium containing 3 mM CuSO4, respectively. Further investigations are required to analyse the genetic composition of multi-resistant bacteria to optimise the effectiveness of indigenous bacterial isolates as bioremediation agents.

Yeasts Inhabiting Extreme Environments and Their Biotechnological Applications

Yeasts are microscopic fungi inhabiting all Earth environments, including those inhospitable for most life forms, considered extreme environments. According to their habitats, yeasts could be extremotolerant or extremophiles. Some are polyextremophiles, depending on their growth capacity, tolerance, and survival in the face of their habitat's physical and chemical constitution. The extreme yeasts are relevant for the industrial production of value-added compounds, such as biofuels, lipids, carotenoids, recombinant proteins, enzymes, among others. This review calls attention to the importance of yeasts inhabiting extreme environments, including metabolic and adaptive aspects to tolerate conditions of cold, heat, water availability, pH, salinity, osmolarity, UV radiation, and metal toxicity, which are relevant for biotechnological applications. We explore the habitats of extreme yeasts, highlighting key species, physiology, adaptations, and molecular identification. Finally, we summarize several findings related to the industrially-important extremophilic yeasts and describe current trends in biotechnological applications that will impact the bioeconomy.

Analysis of Soil Fungal and Bacterial Communities in Tianchi Volcano Crater, Northeast China

High-altitude volcanoes, typical examples of extreme environments, are considered of particular interest in biology as a possible source of novel and exclusive microorganisms. We analyzed the crater soil microbial diversity of Tianchi Volcano, northeast China, by combining molecular and morphological analyses of culturable microbes, and metabarcoding based on Illumina sequencing, in order to increase our understanding of high-altitude volcanic microbial community structure. One-hundred and seventeen fungal strains belonging to 51 species and 31 genera of Ascomycota, Basidiomycota and Mucoromycota were isolated. Penicillium, Trichoderma, Cladosporium, Didymella, Alternaria and Fusarium dominated the culturable fungal community. A considerable number of isolated microbes, including filamentous fungi, such as Aureobasidium pullulans and Epicoccum nigrum, yeasts (Leucosporidium creatinivorum), and bacteria (Chryseobacterium lactis and Rhodococcus spp.), typical of high-altitude, cold, and geothermal extreme environments, provided new insights in the ecological characterization of the investigated environment, and may represent a precious source for the isolation of new bioactive compounds. A total of 1254 fungal and 2988 bacterial operational taxonomic units were generated from metabarcoding. Data analyses suggested that the fungal community could be more sensitive to environmental and geographical change compared to the bacterial community, whose network was characterized by more complicated and closer associations.

Heavy metal capture by autochthonous yeasts from a volcanic influenced environment of Patagonia

Heavy metals at elevated concentrations are a major threat to agricultural and human health. Typically, human activities tend to release these metals to the environment in aqueous solutions, generating high levels of pollution due to the mobility of the heavy metals. The aim of the present work was to assess heavy metal tolerance in yeasts isolated from Río Agrio - Lake Caviahue volcanic acidic aquatic environment and to evaluate the capacity of selected strains to capture metals in acidic culture media conditions. The ability of three yeast species, Cryptococcus agrionensis, Cryptococcus sp. 2, and Coniochaeta fodinicola, to tolerate and capture metals in live cultures has been evaluated. These three yeast species showed high tolerance to low pH and elevated concentrations of metals, thus implying their autochthonous status. Minimal inhibitory concentration (MIC) for growth obtained for these isolates showed elevated tolerance to the six heavy metals evaluated and were significantly higher than those registered for other microorganisms. C. agrionensis was able to capture 15.80 mg (g biomass)^-1 of Cu²⁺ (MIC: 0.22 g L^-1 ), Cryptococcus sp. 2 was able to capture 36.25 and 65.28 mg (g biomass)^-1 of Ni²⁺ and Zn²⁺ , respectively (MIC: 0.56 and 1.68, respectively), and C. fodinicola was able to capture 67.11 mg (g biomass)^-1 of Zn²⁺ (MIC: 3.75). This work reported the ability of yeasts to capture metals in acidic conditions for the first time. We hope that it represents the step-stone for future researches in the ability and metabolism of yeasts form acidic aquatic environment related to metal tolerance and capture.

Heavy metal tolerance in the psychrotolerant Cryptococcus sp. isolated from deep-sea sediments of the Central Indian Basin

A deep-sea isolate of the psychrotolerant yeast Cryptococcus sp. (NIOCC#PY13) obtained from polymetallic nodule-bearing sediments of the Central Indian Basin was examined for its capacity to grow in the presence of various concentrations of the heavy metal salts i.e., ZnSO4 , CuSO4 , Pb(CH3 COO)2 and CdCl2 . It demonstrated considerable growth in the presence of 100 mg/l concentrations of the above-mentioned four heavy metal salts both at 30°C and 15°C. This strain tolerated comparatively higher levels of these four metal salts than other deep-sea and terrestrial yeast isolates belonging to Cryptococcus, Rhodotorula, Rhodosporidium and Sporidiobolus spp. Optimum pH for growth of this isolate was in the range of 6-8 in the presence of heavy metal salts at these two temperatures. Scanning electron microscopic (SEM) studies exhibited altered cell surface morphology of the cells under the influence of heavy metals compared to that with control. The adsorption of heavy metals to the cells was demonstrated by FTIR and EDAX analysis. As evidenced by atomic absorption spectrophotometric (AAS) analysis, about 30-90% of the heavy metals were removed from the culture supernatant after 4 days of growth at 30°C. This deep-sea yeast isolate appears to be a potential candidate for bioremediation of metal-contaminated sites. Moreover, its metal tolerance properties provide a significant insight into its ecological role and adaptations to growth in such extreme conditions.

Biotechnology of marine fungi

Filamentous fungi are the most widely used eukaryotes in industrial and pharmaceutical applications. Their biotechnological uses include the production of enzymes, vitamins, polysaccharides, pigments, lipids and others. Marine fungi are a still relatively unexplored group in biotechnology. Taxonomic and habitat diversity form the basis for exploration of marine fungal biotechnology. This review covers what is known of the potential applications of obligate and marine-derived fungi obtained from coastal to the oceanic and shallow water to the deep-sea habitats. Recent studies indicate that marine fungi are potential candidates for novel enzymes, bioremediation, biosurfactants, polysaccharides, polyunsaturated fatty acids and secondary metabolites. Future studies that focus on culturing rare and novel marine fungi, combined with knowledge of their physiology and biochemistry will provide a firm basis for marine mycotechnology.

Multiple metal tolerance and biosorption of cadmium by Candida tropicalis isolated from industrial effluents: glutathione as detoxifying agent

The ability of cadmium uptake by metal-resistant yeast, Candida tropicalis, from the liquid medium and wastewater was evaluated. The minimum inhibitory concentration of Cd(2+) against C. tropicalis was 2,500 mg L(-1). The yeast also showed tolerance toward Zn(2+) (1,400 mg L(-1)), Ni(2+) (1,000 mg L(-1)), Hg(2+) (1,400 mg L(-1)), Cu(2+) (1,000 mg L(-1)), Cr(6+) (1,200 mg L(-1)), and Pb(2+) (1,000 mg L(-1)). The yeast isolate showed typical growth curves, but lag and log phases extended in the presence of cadmium. The yeast isolate showed optimum growth at 30°C and pH 8. The metal processing ability of the isolate was determined in a medium containing 100 mg L(-1) of Cd(2+). C. tropicalis could decline Cd(2+) 70%, 85%, and 92% from the medium after 48, 96, and 144 h, respectively. C. tropicalis was also able to remove Cd(2+) 40% and 78% from the wastewater after 6 and 12 days, respectively. Cd produced an increase in glutathione (GSH) and nonprotein thiol levels by 135% and 134% at 100-mg L(-1) concentration, respectively. An increase in the synthesis of GSH is involved in metal tolerance, and the presence of increasing GSH concentrations may be a marker for high metal stress in C. tropicalis. C. tropicalis, which is resistant to heavy metal ions and is adaptable to the local environmental conditions, may be employed for metal detoxification operations.

Toxicity and uptake of iron ions by Synechocystis sp. E35 isolated from Kucukcekmece Lagoon, Istanbul

The study demonstrates the potential of using unicellular cyanobacteria species, isolated from Kucukcekmece Lake, Turkey, for biological Iron removal from aqueous solutions. EC(50) at 96h was estimated to be 13.92 mg/L for Synechocystis sp. E35. The optimum pH value and incubation temperature for the resistant isolate were 7.0 and 23 degrees C, respectively. The Iron biosorption/bioaccumulation by Synechocystis sp. E35 was evaluated by fractionating the Fe content as the remaining metal in supernatant, the adsorbed metal on the cell surface and the intracellular accumulation. Synechocystis sp. E35 adsorbed appreciable quantities of Iron ions on the cell surface within 5 min. Metal ions were adsorbed onto the surface of cells followed by active uptake resulting in the transportation of the metal ions across the cell membrane and into the cytoplasm. Intracellular metal uptake increased with increasing metal concentrations from 10 to 15 mg/L. Extracellular polysaccharides (EPSs) were clearly seen in SEM images of Synechocystis sp. E35 grown at a 10mg/L metal concentration. EPS region was analyzed with Energy Dispersive X-Ray Analysis (EDXA) and the SEM images further confirmed our experimental observations about the Iron biosorption/bioaccumulation mechanism.