Chondrocyte cells respond mechanically to compressive loads

Tension regulates the cartilage phenotypic expression of endplate chondrocytes through the α-catenin/actin skeleton/Hippo pathway

The study aimed to investigate the regulatory mechanism of intracellular tension signaling in endplate chondrocytes and its impact on extracellular matrix synthesis. Human endplate chondrocytes were subjected to tension load using Flexcell FX-5000™, and changes in phenotype, morphology, and the expression of Hippo signaling pathway and α-Catenin were assessed through various techniques. Through the overexpression of YAP and inhibition of α-Catenin, the study clarified the intracellular tension signaling pathway and its regulation of extracellular matrix synthesis in endplate cartilage. In vitro-cultured human endplate chondrocytes significantly suppressed phenotype-related genes and proteins, accompanied by distinct changes in cytoskeleton morphology. Tension activation resulted in the substantial activation of the Hippo pathway, increased phosphorylation of YAP, and reduced nuclear translocation of YAP. YAP overexpression alleviated the inhibitory effect of tension on extracellular matrix synthesis in endplate chondrocytes. Tension also upregulated the expression of α-Catenin in endplate chondrocytes, which was attenuated by inhibiting α-Catenin expression, thereby reducing the impact of tension on cytoskeletal morphology and YAP nuclear translocation. Taken together, the α-Catenin/actin skeleton/Hippo-coupled network is a crucial signaling pathway for tension signaling in endplate chondrocytes, providing potential therapeutic targets for the treatment of endplate cartilage degeneration.

Biomechanics of Chondrocytes and Chondrons in Healthy Conditions and Osteoarthritis: A Review of the Mechanical Characterisations at the Microscale

Biomechanical studies are expanding across a variety of fields, from biomedicine to biomedical engineering. From the molecular to the system level, mechanical stimuli are crucial regulators of the development of organs and tissues, their growth and related processes such as remodelling, regeneration or disease. When dealing with cell mechanics, various experimental techniques have been developed to analyse the passive response of cells; however, cell variability and the extraction process, complex experimental procedures and different models and assumptions may affect the resulting mechanical properties. For these purposes, this review was aimed at collecting the available literature focused on experimental chondrocyte and chondron biomechanics with direct connection to their biochemical functions and activities, in order to point out important information regarding the planning of an experimental test or a comparison with the available results. In particular, this review highlighted (i) the most common experimental techniques used, (ii) the results and models adopted by different authors, (iii) a critical perspective on features that could affect the results and finally (iv) the quantification of structural and mechanical changes due to a degenerative pathology such as osteoarthritis.

LAP2β transmits force to upregulate genes via chromatin domain stretching but not compression

There is increasing evidence that force impacts almost every aspect of cells and tissues in physiology and disease including gene regulation. However, the molecular pathway of force transmission from the nuclear lamina to the chromatin remain largely elusive. Here we employ two different approaches of a local stress on cell apical surface via an RGD (Arg-Gly-Asp)-coated magnetic bead and whole cell deformation at cell basal surface via uniaxial or biaxial deformation of a fibronectin-coated flexible polydimethylsiloxane substrate. We find that nuclear protein LAP2β mediates force transmission from the nuclear lamina to the chromatin. Knocking down LAP2β increases spontaneous movements of the chromatin by reducing tethering of the chromatin and substantially inhibits the magnetic bead-stress or the substrate-deformation induced chromatin domain stretching and the ensuing dihydrofolate reductase (DHFR) gene upregulation. Analysis of DHFR gene-containing chromatin domain alignments along or perpendicular to the direction of the stretching/compressing reveals that the chromatin domain must be stretched and not compressed in order for the gene to be rapidly upregulated. Together these results suggest that external-load induced rapid transcription upregulation originates from chromatin domain stretching but not compressing and depends on the molecular force transmission pathway of LAP2β. STATEMENT OF SIGNIFICANCE: How force regulates gene expression has been elusive. Here we show that the orientation of the chromatin domain relative to the stress direction is crucial in determining if the chromatin domain will be stretched or compressed in response to a cell surface loading. We also show that nuclear protein Lap2b is a critical molecule that mediates force transmission from the nuclear laminar to the chromatin to regulate gene transcription. This study reveals the molecular force transmission pathway for force-induced gene regulation.

Cartilage Tissue Engineering Approaches Need to Assess Fibrocartilage When Hydrogel Constructs Are Mechanically Loaded

Chondrocytes that are impregnated within hydrogel constructs sense applied mechanical force and can respond by expressing collagens, which are deposited into the extracellular matrix (ECM). The intention of most cartilage tissue engineering is to form hyaline cartilage, but if mechanical stimulation pushes the ratio of collagen type I (Col1) to collagen type II (Col2) in the ECM too high, then fibrocartilage can form instead. With a focus on Col1 and Col2 expression, the first part of this article reviews the latest studies on hyaline cartilage regeneration within hydrogel constructs that are subjected to compression forces (one of the major types of the forces within joints) in vitro. Since the mechanical loading conditions involving compression and other forces in joints are difficult to reproduce in vitro, implantation of hydrogel constructs in vivo is also reviewed, again with a focus on Col1 and Col2 production within the newly formed cartilage. Furthermore, mechanotransduction pathways that may be related to the expression of Col1 and Col2 within chondrocytes are reviewed and examined. Also, two recently-emerged, novel approaches of load-shielding and synchrotron radiation (SR)–based imaging techniques are discussed and highlighted for future applications to the regeneration of hyaline cartilage. Going forward, all cartilage tissue engineering experiments should assess thoroughly whether fibrocartilage or hyaline cartilage is formed.

The Effects of Crosslinking on the Rheology and Cellular Behavior of Polymer-Based 3D-Multilayered Scaffolds for Restoring Articular Cartilage

Polymer-based tri-layered (bone, intermediate and top layers) scaffolds used for the restoration of articular cartilage were prepared and characterized in this study to emulate the concentration gradient of cartilage. The scaffolds were physically or chemically crosslinked. In order to obtain adequate scaffolds for the intended application, the impact of the type of calcium phosphate used in the bone layer, the polymer used in the intermediate layer and the interlayer crosslinking process were analyzed. The correlation among SEM micrographs, physical-chemical characterization, swelling behavior, rheological measurements and cell studies were examined. Storage moduli at 1 Hz were 0.3-1.7 kPa for physically crosslinked scaffolds, and 4-5 kPa (EDC/NHS system) and 15-20 kPa (glutaraldehyde) for chemically crosslinked scaffolds. Intrinsic viscoelasticity and poroelasticity were considered in discussing the physical mechanism dominating in different time/frequency scales. Cell evaluation showed that all samples are available as alternatives to repair and/or substitute cartilage in articular osteoarthritis.

Chondrocyte Deformations Under Mild Dynamic Loading Conditions

Dynamic deformation of chondrocytes are associated with cell mechanotransduction and thus may offer a new understanding of the mechanobiology of articular cartilage. Despite extensive research on chondrocyte deformations for static conditions, work for dynamic conditions remains rare. However, it is these dynamic conditions that articular cartilage in joints are exposed to everyday, and that seem to promote biological signaling in chondrocytes. Therefore, the objective of this study was to develop an experimental technique to determine the in situ deformations of chondrocytes when the cartilage is dynamically compressed. We hypothesized that dynamic deformations of chondrocytes vastly differ from those observed under steady-state static strain conditions. Real-time chondrocyte geometry was reconstructed at 10, 15, and 20% compression during ramp compressions with 20% ultimate strain, applied at a strain rate of 0.2% s^-1, followed by stress relaxation. Dynamic compressive chondrocyte deformations were non-linear as a function of nominal strain, with large deformations in the early and small deformations in the late part of compression. Early compression (up to about 10%) was associated with chondrocyte volume loss, while late compression (> ~ 10%) was associated with cell deformation but minimal volume loss. Force continued to decrease for 5 min in the stress-relaxation phase, while chondrocyte shape/volume remained unaltered after the first minute of stress-relaxation.

LRP receptors in chondrocytes are modulated by simulated microgravity and cyclic hydrostatic pressure

Mechanical loading is essential for the maintenance of musculoskeletal homeostasis. Cartilage has been demonstrated to be highly mechanoresponsive, but the mechanisms by which chondrocytes respond to mechanical stimuli are not clearly understood. The goal of the study was to determine how LRP4, LRP5, and LRP6 within canonical Wnt-signaling are regulated in simulated microgravity and cyclic hydrostatic pressure, and to investigate the potential role of LRP 4/5/6 in cartilage degeneration. Rat chondrosacroma cell (RCS) pellets were stimulated using either cyclic hydrostatic pressure (1Hz, 7.5 MPa, 4hr/day) or simulated microgravity in a rotating wall vessel (RWV) bioreactor (11RPM, 24hr/day). LRP4/5/6 mRNA expression was assessed by RT-qPCR and LRP5 protein expression was determined by fluorescent immunostaining. To further evaluate our in vitro findings in vivo, mice were subjected to hindlimb suspension for 14 days and the femoral heads stained for LRP5 expression. We found that, in vitro, LRP4/5/6 mRNA expression is modulated in a time-dependent manner by mechanical stimulation. Additionally, LRP5 protein expression is upregulated in response to both simulated microgravity and cyclic hydrostatic pressure. LRP5 is also upregulated in vivo in the articular cartilage of hindlimb suspended mice. This is the first study to examine how LRP4/5/6, critical receptors within musculoskeletal biology, respond to mechanical stimulation. Further elucidation of this mechanism could provide significant clinical benefit for the identification of pharmaceutical targets for the maintenance of cartilage health.

Low-level cyclic tibial compression attenuates early osteoarthritis progression after joint injury in mice

OBJECTIVE

Mechanical loading and joint health have a unique relationship in osteoarthritis (OA) onset and progression. Although high load levels adversely affect cartilage health, exercise that involves low to moderate load levels can alleviate OA symptoms. We sought to isolate the beneficial effects of mechanical loading using controlled in vivo cyclic tibial compression. We hypothesized that low-level cyclic compression would attenuate post-traumatic OA symptoms induced by destabilization of the medial meniscus (DMM).

METHODS

10-week-old C57Bl/6J male mice underwent DMM surgery (n = 51). After a 5-day post-operative recovery period, we applied daily cyclic tibial compression to the operated limbs at low (1.0N or 2.0N) or moderate (4.5N) magnitudes for 2 or 6 weeks. At the completion of loading, we compared cartilage and peri-articular bone features of mice that underwent DMM and loading to mice that only underwent DMM.

RESULTS

Compared to DMM alone, low-level cyclic compression for 6 weeks attenuated DMM-induced cartilage degradation (OARSI score, P = 0.008, 95% confidence interval (CI): 0.093 to 0.949). Low-level loading attenuated DMM-induced osteophyte formation after 2 weeks (osteophyte size, P = 0.033, 95% CI: 3.27-114.45 μm), and moderate loading attenuated subchondral bone sclerosis after 6 weeks (tissue mineral density (TMD), P = 0.011, 95% CI: 6.32-70.60 mg HA/ccm) compared to limbs that only underwent DMM. Finally, loading had subtle beneficial effects on cartilage cellularity and aggrecanase activity after DMM.

CONCLUSION

Low-level cyclic compression is beneficial to joint health after an injury. Therefore, the progression of early OA may be attenuated by applying well controlled, low-level loading shortly following joint trauma.

In Situ Investigation of Interrelationships Between Morphology and Biomechanics of Endothelial and Glial Cells and their Nuclei

Morphology and biomechanics of cells and nuclei are interlinked with one another and play key roles in fundamental physiological processes. While powerful approaches are available for performing separate morphological and biomechanical investigations on cells and nuclei, simultaneous investigations in situ are challenging. Here, an appropriate approach is presented based on the simultaneous combination of atomic force microscopy and confocal microscopy in situ. Two cell types with entirely different morphologies, physiological roles, and biomechanical environments are investigated: vascular endothelial cells (ECs) with dense cytoskeletal actin, and nervous system glial cells (Schwann cells (SCs)) with dense vimentin network. Results reveal that ECs and their nuclei show high pliability and tend to undergo deformation only at compression sites. SCs, in contrast, show greater ability to resist mechanical deformation. Likewise, SC nuclei are harder to deform than EC nuclei, despite that SC nuclei have significantly lower amounts of lamins A/C, which reportedly scale with nuclear stiffness. The morphology-biomechanics interrelationships in SCs, ECs, and their nuclei may be a key factor in ensuring their physiological functions. In adult SCs, mechanosensitivity is presumably traded for mechanical strength to protect the neurons they encase, whereas ECs maintain mechanosensitivity to ensure specific local physiological response to mechanical stimuli.

Collagen Scaffolds in Cartilage Tissue Engineering and Relevant Approaches for Future Development

BACKGROUND

Cartilage tissue engineering (CTE) aims to obtain a structure mimicking native cartilage tissue through the combination of relevant cells, three-dimensional scaffolds, and extraneous signals. Implantation of 'matured' constructs is thus expected to provide solution for treating large injury of articular cartilage. Type I collagen is widely used as scaffolds for CTE products undergoing clinical trial, owing to its ubiquitous biocompatibility and vast clinical approval. However, the long-term performance of pure type I collagen scaffolds would suffer from its limited chondrogenic capacity and inferior mechanical properties. This paper aims to provide insights necessary for advancing type I collagen scaffolds in the CTE applications.

METHODS

Initially, the interactions of type I/II collagen with CTE-relevant cells [i.e., articular chondrocytes (ACs) and mesenchymal stem cells (MSCs)] are discussed. Next, the physical features and chemical composition of the scaffolds crucial to support chondrogenic activities of AC and MSC are highlighted. Attempts to optimize the collagen scaffolds by blending with natural/synthetic polymers are described. Hybrid strategy in which collagen and structural polymers are combined in non-blending manner is detailed.

RESULTS

Type I collagen is sufficient to support cellular activities of ACs and MSCs; however it shows limited chondrogenic performance than type II collagen. Nonetheless, type I collagen is the clinically feasible option since type II collagen shows arthritogenic potency. Physical features of scaffolds such as internal structure, pore size, stiffness, etc. are shown to be crucial in influencing the differentiation fate and secreting extracellular matrixes from ACs and MSCs. Collagen can be blended with native or synthetic polymer to improve the mechanical and bioactivities of final composites. However, the versatility of blending strategy is limited due to denaturation of type I collagen at harsh processing condition. Hybrid strategy is successful in maximizing bioactivity of collagen scaffolds and mechanical robustness of structural polymer.

CONCLUSION

Considering the previous improvements of physical and compositional properties of collagen scaffolds and recent manufacturing developments of structural polymer, it is concluded that hybrid strategy is a promising approach to advance further collagen-based scaffolds in CTE.

Mechanoactivation of Wnt/β-catenin pathways in health and disease

Mechanical forces play an important role in regulating tissue development and homeostasis in multiple cell types including bone, joint, epithelial and vascular cells, and are also implicated in the development of diseases, e.g. osteoporosis, cardiovascular disease and osteoarthritis. Defining the mechanisms by which cells sense and respond to mechanical forces therefore has important implications for our understanding of tissue function in health and disease and may lead to the identification of targets for therapeutic intervention. Mechanoactivation of the Wnt signalling pathway was first identified in osteoblasts with a key role for β-catenin demonstrated in loading-induced osteogenesis. Since then, mechanoregulation of the Wnt pathway has also been observed in stem cells, epithelium, chondrocytes and vascular and lymphatic endothelium. Wnt can signal through both canonical and non-canonical pathways, and evidence suggests that both can mediate responses to mechanical strain, stretch and shear stress. This review will discuss our current understanding of the activation of the Wnt pathway in response to mechanical forces.

Cartilage Regeneration in Preannealed Silk Elastin-Like Co-Recombinamers Injectable Hydrogel Embedded with Mature Chondrocytes in an Ex Vivo Culture Platform

Tissue engineering for cartilage repair requires biomaterials that show rapid gelation and adequate mechanical properties. Although the use of hydrogel is the most promising biomaterial, it often lacks in rigidity and anchorage of cells when they are surrounded by synovial fluid while they are subjected to heavy loads. We developed and produced the Silk Elastin-Like co-Recombinamer (SELR), which contains both the physical interaction from elastin motifs and from silk motifs. In the first part of this work, we set up and optimized a preannealing treatment based on the evolution of silk motifs into β-sheet structures in order to fulfill the required mechanical properties of hydrogels for cartilage repair. The new preannealed SELRs (pA(EIS)₂-(I₅R)₆) were characterized with the combination of several experimental techniques (CD, TEM, SEM, and rheology) to provide a deep insight into the material features. Finally, the regeneration properties of the pA(EIS)₂-(I₅R)₆ hydrogel embedded with chondrocytes were evaluated. After 4 weeks of culturing in a standardized and representative ex vivo model, the biochemical and histological analysis revealed the production of glycosaminglycans and collagen. Moreover, the immunohistochemistry showed the absence of fibro-cartilage and the presence of hyaline cartilage. Hence, we conclude that the pA(EIS)₂-(I₅R)₆ hydrogel presents improved mechanical properties while conserving the injectability, which leads to successful regeneration of hyaline cartilage in an ex vivo model.

Emerging views of the nucleus as a cellular mechanosensor

The ability of cells to respond to mechanical forces is critical for numerous biological processes. Emerging evidence indicates that external mechanical forces trigger changes in nuclear envelope structure and composition, chromatin organization and gene expression. However, it remains unclear if these processes originate in the nucleus or are downstream of cytoplasmic signals. Here we discuss recent findings that support a direct role of the nucleus in cellular mechanosensing and highlight novel tools to study nuclear mechanotransduction.

Dietary variation and mechanical properties of articular cartilage in the temporomandibular joint: implications for the role of plasticity in mechanobiology and pathobiology

Due to their nature as tissue composites, skeletal joints pose an additional challenge in terms of evaluating the functional significance of morphological variation in their bony and cartilaginous components in response to altered loading conditions. Arguably, this complexity requires more direct means of investigating joint plasticity and performance than typically employed to analyze macro- and micro-anatomical phenomena. To address a significant gap in our understanding of the plasticity of the mammalian temporomandibular joint (TMJ), we investigated the histology and mechanical properties of condylar articular cartilage in rabbits subjected to long-term variation in diet-induced masticatory stresses, specifically cyclical loading. Three cohorts of male weanlings were raised for six months on different diets until adulthood. Following euthanasia, the TMJ condyles on one side were dissected away, fixed, decalcified, dehydrated, embedded and sectioned. Safranin O staining was employed to identify variation in proteoglycan content, which in turn was used to predict patterns of articular cartilage stiffness in contralateral condylar specimens for each treatment group. Hematoxylin and eosin staining was used to quantify diet-induced changes in chondrocyte hypertrophy and cellularity. Mechanical tests document significant decreases in articular cartilage stiffness corresponding to patterns of extracellular matrix relative protein abundance in rabbits subjected to greater cyclical loading. This indicates that TMJs routinely subjected to higher masticatory stresses due to a challenging diet eventually develop postnatal decreases in the ability to counter compressive loads during postcanine biting and chewing. These findings provide novel information regarding TMJ performance, with broader implications about the costs and benefits of phenotypic plasticity as well as implications for how such biological processes affect connective tissue mechanobiology and pathobiology.

Acute and Stress-related Injuries of Bone and Cartilage: Pertinent Anatomy, Basic Biomechanics, and Imaging Perspective

Bone or cartilage, or both, are frequently injured related to either a single episode of trauma or repetitive overuse. The resulting structural damage is varied, governed by the complex macroscopic and microscopic composition of these tissues. Furthermore, the biomechanical properties of both cartilage and bone are not uniform, influenced by the precise age and activity level of the person and the specific anatomic location within the skeleton. Of the various histologic components that are found in cartilage and bone, the collagen fibers and bundles are most influential in transmitting the forces that are applied to them, explaining in large part the location and direction of the resulting internal stresses that develop within these tissues. Therefore, thorough knowledge of the anatomy, physiology, and biomechanics of normal bone and cartilage serves as a prerequisite to a full understanding of both the manner in which these tissues adapt to physiologic stresses and the patterns of tissue failure that develop under abnormal conditions. Such knowledge forms the basis for more accurate assessment of the diverse imaging features that are encountered following acute traumatic and stress-related injuries to the skeleton. (©) RSNA, 2016.

Combined effects of oscillating hydrostatic pressure, perfusion and encapsulation in a novel bioreactor for enhancing extracellular matrix synthesis by bovine chondrocytes

The influence of combined shear stress and oscillating hydrostatic pressure (OHP), two forms of physical forces experienced by articular cartilage (AC) in vivo, on chondrogenesis, is investigated in a unique bioreactor system. Our system introduces a single reaction chamber design that does not require transfer of constructs after seeding to a second chamber for applying the mechanical forces, and, as such, biochemical and mechanical stimuli can be applied in combination. The biochemical and mechanical properties of bovine articular chondrocytes encapsulated in agarose scaffolds cultured in our bioreactors for 21 days are compared to cells statically cultured in agarose scaffolds in addition to static micromass and pellet cultures. Our findings indicate that glycosaminoglycan and collagen secretions were enhanced by at least 1.6-fold with scaffold encapsulation, 5.9-fold when adding 0.02 Pa of shear stress and 7.6-fold with simultaneous addition of 4 MPa of OHP when compared to micromass samples. Furthermore, shear stress and OHP have chondroprotective effects as evidenced by lower mRNA expression of β1 integrin and collagen X to non-detectable levels and an absence of collagen I upregulation as observed in micromass controls. These collective results are further supported by better mechanical properties as indicated by 1.6-19.8-fold increases in elastic moduli measured by atomic force microscopy.

The effect of matrix stiffness on biomechanical properties of chondrocytes

The behavior of chondrocytes is regulated by multiple mechanical microenvironmental cues. During development and degenerative disease of articular cartilage, as an external signal, the extracellular matrix stiffness of chondrocytes changes significantly, but whether and how this biophysical cue affects biomechanical properties of chondrocytes remain elusive. In the present study, we designed supporting-biomaterials as  mimics of native pericellular matrix to study the effect of matrix stiffness on chondrocyte morphology and F-actin distribution. Furthermore, the active mechanical behavior of chondrocytes during sensing and responding to different matrix stiffness was quantitatively investigated using atom force microscope technique and theoretical model. Our results indicated that stiffer matrix tends to increase the cell spreading area, the percentage of irregular cell shape distribution and mechanical parameters including elastic modulus (E_elastic), instantaneous modulus (E₀), relaxed modulus (E_R) and apparent viscosity (μ) of chondrocytes. Knowledge of matrix stiffness-dependent biomechanical behaviors of chondrocytes has important implications for optimizing matrix material and advancing chondrocyte-based applications for functional tissue engineering.

Cell elasticity with altered cytoskeletal architectures across multiple cell types

The cytoskeleton is primarily responsible for providing structural support, localization and transport of organelles, and intracellular trafficking. The structural support is supplied by actin filaments, microtubules, and intermediate filaments, which contribute to overall cell elasticity to varying degrees. We evaluate cell elasticity in five different cell types with drug-induced cytoskeletal derangements to probe how actin filaments and microtubules contribute to cell elasticity and whether it is conserved across cell type. Specifically, we measure elastic stiffness in primary chondrocytes, fibroblasts, endothelial cells (HUVEC), hepatocellular carcinoma cells (HUH-7), and fibrosarcoma cells (HT 1080) subjected to two cytoskeletal destabilizers: cytochalasin D and nocodazole, which disrupt actin and microtubule polymerization, respectively. Elastic stiffness is measured by atomic force microscopy (AFM) and the disruption of the cytoskeleton is confirmed using fluorescence microscopy. The two cancer cell lines showed significantly reduced elastic moduli values (~0.5kPa) when compared to the three healthy cell lines (~2kPa). Non-cancer cells whose actin filaments were disrupted using cytochalasin D showed a decrease of 60-80% in moduli values compared to untreated cells of the same origin, whereas the nocodazole-treated cells showed no change in elasticity. Overall, we demonstrate actin filaments contribute more to elastic stiffness than microtubules but this result is cell type dependent. Cancer cells behaved differently, exhibiting increased stiffness as well as stiffness variability when subjected to nocodazole. We show that disruption of microtubule dynamics affects cancer cell elasticity, suggesting therapeutic drugs targeting microtubules be monitored for significant elastic changes.

FINITE ELEMENT ANALYSIS OF MECHANICAL DEFORMATION OF CHONDROCYTE TO 2D SUBSTRATE AND 3D SCAFFOLD

The mechanical properties of cells are important in regulation of many aspects of cell functions. The cell may respond differently to a 2D plate and a 3D scaffold. In this study, the finite element analysis (FEA) was adopted to investigate mechanical deformation of chondrocyte on a 2D glass plate and chondrocyte seeded in a 3D scaffold. The elastic properties of the cell differ in these two different compression tests. This is because that the cell sensed different environment (2D plate and 3D construct) which can alter its structure and mechanical properties. It reveals how the apparent Poisson's ratio of a cell changes with the applied strain depends on its mechanical environment (e.g., the elastic moduli and Poisson's ratios of the scaffold and extracellular matrix) which regulates cell mechanics. In addition, the elastic modulus of the nucleus also plays a significant role in the determination of the Poisson's ratio of the cell for the cells seeded scaffold. It also reveals the intrinsic Poisson's ratio of the cell cannot be obtained by extrapolating the measured apparent Poisson's ratio to zero strain, particularly when scaffold's Poisson's ratio is quite different from the cell.

Acute Osteochondral Fractures in the Lower Extremities - Approach to Identification and Treatment

Chondral and osteochondral fractures of the lower extremities are important injuries because they can cause pain and dysfunction and often lead to osteoarthritis. These injuries can be misdiagnosed initially which may impact on the healing potential and result in poor long-term outcome. This comprehensive review focuses on current pitfalls in diagnosing acute osteochondral lesions, potential investigative techniques to minimize diagnostic errors as well as surgical treatment options. Acute osteochondral fractures are frequently missed and can be identified more accurately with specific imaging techniques. A number of different methods can be used to fix these fractures but attention to early diagnosis is required to limit progression to osteoarthritis. These fractures are common with joint injuries and early diagnosis and treatment should lead to improved long term outcomes.

Passive strain-induced matrix synthesis and organization in shape-specific, cartilaginous neotissues

Tissue-engineered musculoskeletal soft tissues typically lack the appropriate mechanical robustness of their native counterparts, hindering their clinical applicability. With structure and function being intimately linked, efforts to capture the anatomical shape and matrix organization of native tissues are imperative to engineer functionally robust and anisotropic tissues capable of withstanding the biomechanically complex in vivo joint environment. The present study sought to tailor the use of passive axial compressive loading to drive matrix synthesis and reorganization within self-assembled, shape-specific fibrocartilaginous constructs, with the goal of developing functionally anisotropic neotissues. Specifically, shape-specific fibrocartilaginous neotissues were subjected to 0, 0.01, 0.05, or 0.1 N axial loads early during tissue culture. Results found the 0.1-N load to significantly increase both collagen and glycosaminoglycan synthesis by 27% and 67%, respectively, and to concurrently reorganize the matrix by promoting greater matrix alignment, compaction, and collagen crosslinking compared with all other loading levels. These structural enhancements translated into improved functional properties, with the 0.1-N load significantly increasing both the relaxation modulus and Young's modulus by 96% and 255%, respectively, over controls. Finite element analysis further revealed the 0.1-N uniaxial load to induce multiaxial tensile and compressive strain gradients within the shape-specific neotissues, with maxima of 10.1%, 18.3%, and -21.8% in the XX-, YY-, and ZZ-directions, respectively. This indicates that strains created in different directions in response to a single axis load drove the observed anisotropic functional properties. Together, results of this study suggest that strain thresholds exist within each axis to promote matrix synthesis, alignment, and compaction within the shape-specific neotissues. Tailoring of passive axial loading, thus, presents as a simple, yet effective way to drive in vitro matrix development in shape-specific neotissues toward more closely achieving native structural and functional properties.

Effects of cyclic tensile strain on chondrocyte metabolism: a systematic review

Chondrocytes reorganize the extracellular matrix of articular cartilage in response to externally applied loads. Thereby, different loading characteristics lead to different biological responses. Despite of active research in this area, it is still unclear which parts of the extracellular matrix adapt in what ways, and how specific loading characteristics affect matrix changes. This review focuses on the influence of cyclic tensile strain on chondrocyte metabolism in vitro. It also aimed to identify anabolic or catabolic chondrocyte responses to different loading protocols. The key findings show that loading cells up to 3% strain, 0.17 Hz, and 2 h, resulted in weak or no biological responses. Loading between 3–10% strain, 0.17–0.5 Hz, and 2–12 h led to anabolic responses; and above 10% strain, 0.5 Hz, and 12 h catabolic events predominated. However, this review also discusses that various other factors are involved in the remodeling of the extracellular matrix in response to loading, and that parameters like an inflammatory environment might influence the biological response.

Biocompatible elastin-like click gels: design, synthesis and characterization

Elastin-like recombinamer click gels (ELR-CGs) for biomedical applications, such as drug delivery or tissue engineering, have been developed by taking advantage of the click reaction (CuAAC) in the absence of traditional crosslinking agents. ELRs are functionalized with alkyne and azide groups using conventional chemical techniques to introduce the reactivity required to carry out the 1,3-dipolar cycloaddition under mild biocompatible conditions, with no toxic by-products and in short reaction times. Hydrogels with moduli in the range 1,000-10,000 Pa have been synthesized, characterized, and tested in vitro against several cell types. The cells embedded into ELR-CGs possessed high viability and proliferation rate. The mechanical properties, porosity and swelling of the resulting ELR-CGs can easily be tuned by adjusting the ELR concentration. We also show that it is possible to replicate different patterns on the hydrogel surface, thus allowing the use of this type of hydrogel to improve applications that require cell guidance or even differentiation depending on the surface topography.

Dynamic nanomechanics of individual bone marrow stromal cells and cell-matrix composites during chondrogenic differentiation

Dynamic nanomechanical properties of bovine bone marrow stromal cells (BMSCs) and their newly synthesized cartilage-like matrices were studied at nanometer scale deformation amplitudes. The increase in their dynamic modulus, |E(*)| (e.g., 2.4±0.4 kPa at 1 Hz to 9.7±0.2 kPa at 316 Hz at day 21, mean±SEM), and phase angle, δ, (e.g., 15±2° at 1 Hz to 74±1° at 316 Hz at day 21) with increasing frequency were attributed to the fluid flow induced poroelasticity, governed by both the newly synthesized matrix and the intracellular structures. The absence of culture duration dependence suggested that chondrogenesis of BMSCs had not yet resulted in the formation of a well-organized matrix with a hierarchical structure similar to cartilage. BMSC-matrix composites demonstrated different poro-viscoelastic frequency-dependent mechanical behavior and energy dissipation compared to chondrocyte-matrix composites due to differences in matrix molecular constituents, structure and cell properties. This study provides important insights into the design of optimal protocols for tissue-engineered cartilage products using chondrocytes and BMSCs.

The application of multiple biophysical cues to engineer functional neocartilage for treatment of osteoarthritis. Part II: signal transduction

The unique mechanoelectrochemical environment of cartilage has motivated researchers to investigate the effect of multiple biophysical cues, including mechanical, magnetic, and electrical stimulation, on chondrocyte biology. It is well established that biophysical stimuli promote chondrocyte proliferation, differentiation, and maturation within "biological windows" of defined dose parameters, including mode, frequency, magnitude, and duration of stimuli (see companion review Part I: Cellular Response). However, the underlying molecular mechanisms and signal transduction pathways activated in response to multiple biophysical stimuli remain to be elucidated. Understanding the mechanisms of biophysical signal transduction will deepen knowledge of tissue organogenesis, remodeling, and regeneration and aiding in the treatment of pathologies such as osteoarthritis. Further, this knowledge will provide the tissue engineer with a potent toolset to manipulate and control cell fate and subsequently develop functional replacement cartilage. The aim of this article is to review chondrocyte signal transduction pathways in response to mechanical, magnetic, and electrical cues. Signal transduction does not occur along a single pathway; rather a number of parallel pathways appear to be activated, with calcium signaling apparently common to all three types of stimuli, though there are different modes of activation. Current tissue engineering strategies, such as the development of "smart" functionalized biomaterials that enable the delivery of growth factors or integration of conjugated nanoparticles, may further benefit from targeting known signal transduction pathways in combination with external biophysical cues.

Elastin-like recombinamer catalyst-free click gels: characterization of poroelastic and intrinsic viscoelastic properties

Elastin-like recombinamer catalyst-free click gels (ELR-CFCGs) have been prepared and characterized by modifying both a structural ELR (VKVx24) and a biofunctionalized ELR-bearing RGD cell-adhesion sequence (HRGD6) to bear the reactive groups needed to form hydrogels via a click reaction. Prior to formation of the ELR-CFCGs, azide-bearing and cyclooctyne-modified ELRs were also synthesized. Subsequent covalent crosslinking was based on the reaction between these azide and cyclooctyne groups, which takes place under physiological conditions and without the need for a catalyst. The correlation among SEM micrographs, porosity, swelling ratio, and rheological measurements have been carried out. The storage and loss moduli at 1Hz are in the range 1-10kPa and 100-1000Pa, respectively. The linear dependence of |G∗| on f(½) and the peak value of tan δ were considered to be consistent with a poroelastic mechanism dominating the frequency range 0.3-70Hz. The discrete relaxation spectrum was obtained from stress relaxation measurements (t>5s). The good fit of the relaxation modulus to decrease exponential functions suggests that an intrinsic viscoelastic mechanism dominates the transients. Several recombinamer concentrations and temperatures were tested to obtain gels with fully tuneable properties that could find applications in the biomedical field.

Deformation thresholds for chondrocyte death and the protective effect of the pericellular matrix

In cartilage tissue engineering studies, the stimulatory effect of mechanical perturbation declines after the first 2 weeks of culture. Similarly, it is known that chondrocyte-agarose constructs should not be loaded within the first days after seeding, to prevent considerable cell death, suggesting a mechanical threshold. This study aims to establish a relationship between chondrocyte deformation and death, and to evaluate the protective effect of the pericellular matrix (PCM) that is formed in 3D cultures. Chondrocyte viability was monitored every hour for 24 h after applying a strain range of 0% to 25% to agarose constructs containing chondrocytes, cultured for 1, 3, 5, 7, or 10 days. At these culture time points, the PCM thickness and chondrocyte deformation were assessed by means of histology and assayed for biochemical contents. Inverse finite element (FE) simulations were used to evaluate the change of mechanical properties of the chondrocyte and PCM over the 10-day culture duration. Chondrocyte death was demonstrated to be dependent on both the magnitude and duration of straining. The highest cell death was observed at day 1 (43%), reducing over culture duration (15% at day 3 and 2.5% at day 10). Cell deformation at 25% compression decreased significantly over culture duration (aspect ratio of 2.24±0.67 at day 1 and 1.45±0.24 at day 3) and with increased matrix production. Inverse FE simulations showed an increasing PCM Young's modulus of 45 kPa at day 3 to 162 kPa at day 10. The current results provide evidence for a mechanical threshold for chondrocyte death and for the protective effect of the PCM. As such, these insights may help in establishing mechanical loading protocols for cartilage tissue engineering studies.

Nanobiomechanics of living cells: a review

Nanobiomechanics of living cells is very important to understand cell-materials interactions. This would potentially help to optimize the surface design of the implanted materials and scaffold materials for tissue engineering. The nanoindentation techniques enable quantifying nanobiomechanics of living cells, with flexibility of using indenters of different geometries. However, the data interpretation for nanoindentation of living cells is often difficult. Despite abundant experimental data reported on nanobiomechanics of living cells, there is a lack of comprehensive discussion on testing with different tip geometries, and the associated mechanical models that enable extracting the mechanical properties of living cells. Therefore, this paper discusses the strategy of selecting the right type of indenter tips and the corresponding mechanical models at given test conditions.

The effect of the endothelial cell cortex on atomic force microscopy measurements

We examined whether the presence of the cell cortex might explain, in part, why previous studies using atomic force microscopy (AFM) to measure cell modulus (E) gave higher values with sharp tips than for larger spherical tips. We confirmed these AFM findings in human umbilical vein endothelial cells (HUVEC) and Schlemm's canal (SC) endothelial cells with AFM indentation ≤ 400 nm, two cell types with prominent cortices (312 ± 65 nm in HUVEC and 371 ± 91 nm in SC cells). With spherical tips, E (kPa) was 0.71 ± 0.16 in HUVEC and 0.94 ± 0.06 in SC cells. Much higher values of E were measured using sharp tips: 3.23 ± 0.54 in HUVEC and 6.67 ± 1.07 in SC cells. Previous explanations for this difference such as strain hardening or a substrate effect were shown to be inconsistent with our measurements. Finite element modeling studies showed that a stiff cell cortex could explain the results. In both cell types, Latrunculin-A greatly reduced E for sharp and rounded tips, and also reduced the ratio of the values measured with a sharp tip as compared to a rounded tip. Our results suggest that the cell cortex increases the apparent endothelial cell modulus considerably when measured using a sharp AFM tip.

Biomechanical properties and mechanobiology of the articular chondrocyte

To withstand physiological loading over a lifetime, human synovial joints are covered and protected by articular cartilage, a layer of low-friction, load-bearing tissue. The unique mechanical function of articular cartilage largely depends on the composition and structural integrity of the cartilage matrix. The matrix is produced by highly specialized resident cells called chondrocytes. Under physiological loading, chondrocytes maintain the balance between degradation and synthesis of matrix macromolecules. Under excessive loading or injury, however, degradation exceeds synthesis, causing joint degeneration and, eventually, osteoarthritis (OA). Hence, the mechanoresponses of chondrocytes play an important role in the development of OA. Despite its clear importance, the mechanobiology of articular chondrocytes is not well understood. To summarize our current understanding, here we review studies of the effect of mechanical forces on mechanical and biological properties of articular chondrocytes. First, we present the viscoelastic properties of the cell nucleus, chondrocyte, pericellular matrix, and chondron. Then we discuss how these properties change in OA. Finally, we discuss the responses of normal and osteoarthritic chondrocytes to a variety of mechanical stimuli. Studies reviewed here may provide novel insights into the pathogenesis of OA and may help in development of effective biophysical treatment.

Functional morphometric analysis in cellular behaviors: shape and size matter

Cellular morphogenesis in response to biophysical and topographical cues provides insights into cytoskeletal status, biointerface communications, and phenotypic adaptations in an incessant signaling feedback that governs cellular fate. Morphometric characterization is an important element in the study of the dynamic cellular behaviors, in their interactive response to environmental influence exerted by culture system. They collectively serve to reflect cellular proliferation, migration, and differentiation, which may serve as prognostic indices for clinical and pathological diagnosis. Various parameters are proposed to categorize morphological adaptations in relation to cellular function. In this review, the underlying principles, assumptions, and limitations of morphological characterizations are discussed. The significance, challenges, and implications of quantitative morphometric characterization of cell shapes and sizes in determining cellular functions are discussed.

Mechanical regulation of chondrogenesis

Mechanical factors play a crucial role in the development of articular cartilage in vivo. In this regard, tissue engineers have sought to leverage native mechanotransduction pathways to enhance in vitro stem cell-based cartilage repair strategies. However, a thorough understanding of how individual mechanical factors influence stem cell fate is needed to predictably and effectively utilize this strategy of mechanically-induced chondrogenesis. This article summarizes some of the latest findings on mechanically stimulated chondrogenesis, highlighting several new areas of interest, such as the effects of mechanical stimulation on matrix maintenance and terminal differentiation, as well as the use of multifactorial bioreactors. Additionally, the roles of individual biophysical factors, such as hydrostatic or osmotic pressure, are examined in light of their potential to induce mesenchymal stem cell chondrogenesis. An improved understanding of biomechanically-driven tissue development and maturation of stem cell-based cartilage replacements will hopefully lead to the development of cell-based therapies for cartilage degeneration and disease.

Cell mechanics, structure, and function are regulated by the stiffness of the three-dimensional microenvironment

This study adopts a combined computational and experimental approach to determine the mechanical, structural, and metabolic properties of isolated chondrocytes cultured within three-dimensional hydrogels. A series of linear elastic and hyperelastic finite-element models demonstrated that chondrocytes cultured for 24 h in gels for which the relaxation modulus is <5 kPa exhibit a cellular Young's modulus of ∼5 kPa. This is notably greater than that reported for isolated chondrocytes in suspension. The increase in cell modulus occurs over a 24-h period and is associated with an increase in the organization of the cortical actin cytoskeleton, which is known to regulate cell mechanics. However, there was a reduction in chromatin condensation, suggesting that changes in the nucleus mechanics may not be involved. Comparison of cells in 1% and 3% agarose showed that cells in the stiffer gels rapidly develop a higher Young's modulus of ∼20 kPa, sixfold greater than that observed in the softer gels. This was associated with higher levels of actin organization and chromatin condensation, but only after 24 h in culture. Further studies revealed that cells in stiffer gels synthesize less extracellular matrix over a 28-day culture period. Hence, this study demonstrates that the properties of the three-dimensional microenvironment regulate the mechanical, structural, and metabolic properties of living cells.

A fluid-structure interaction model to characterize bone cell stimulation in parallel-plate flow chamber systems

Bone continuously adapts its internal structure to accommodate the functional demands of its mechanical environment and strain-induced flow of interstitial fluid is believed to be the primary mediator of mechanical stimuli to bone cells in vivo. In vitro investigations have shown that bone cells produce important biochemical signals in response to fluid flow applied using parallel-plate flow chamber (PPFC) systems. However, the exact mechanical stimulus experienced by the cells within these systems remains unclear. To fully understand this behaviour represents a most challenging multi-physics problem involving the interaction between deformable cellular structures and adjacent fluid flows. In this study, we use a fluid-structure interaction computational approach to investigate the nature of the mechanical stimulus being applied to a single osteoblast cell under fluid flow within a PPFC system. The analysis decouples the contribution of pressure and shear stress on cellular deformation and for the first time highlights that cell strain under flow is dominated by the pressure in the PPFC system rather than the applied shear stress. Furthermore, it was found that strains imparted on the cell membrane were relatively low whereas significant strain amplification occurred at the cell-substrate interface. These results suggest that strain transfer through focal attachments at the base of the cell are the primary mediators of mechanical signals to the cell under flow in a PPFC system. Such information is vital in order to correctly interpret biological responses of bone cells under in vitro stimulation and elucidate the mechanisms associated with mechanotransduction in vivo.

Computational aspects in mechanical modeling of the articular cartilage tissue

This review focuses on the modeling of articular cartilage (at the tissue level), chondrocyte mechanobiology (at the cell level) and a combination of both in a multiscale computation scheme. The primary objective is to evaluate the advantages and disadvantages of conventional models implemented to study the mechanics of the articular cartilage tissue and chondrocytes. From monophasic material models as the simplest form to more complicated multiscale theories, these approaches have been frequently used to model articular cartilage and have contributed significantly to modeling joint mechanics, addressing and resolving numerous issues regarding cartilage mechanics and function. It should be noted that attentiveness is important when using different modeling approaches, as the choice of the model limits the applications available. In this review, we discuss the conventional models applicable to some of the mechanical aspects of articular cartilage such as lubrication, swelling pressure and chondrocyte mechanics and address some of the issues associated with the current modeling approaches. We then suggest future pathways for a more realistic modeling strategy as applied for the simulation of the mechanics of the cartilage tissue using multiscale and parallelized finite element method.

Chondrocyte deformation under extreme tissue strain in two regions of the rabbit knee joint

Articular cartilage and its native cells-chondrocytes-are exposed to a wide range of mechanical loading. Chondrocytes are responsible for maintaining the cartilage matrix, yet relatively little is known regarding their behavior under a complete range of mechanical loads or how cell mechanics are affected by region within the joint. The purpose of this study was to investigate chondrocyte deformations in situ under tissue loads ranging from physiological to extreme (0-80% nominal strain) in two regions of the rabbit knee joint (femoral condyles and patellae). Local matrix strains and cell compressive strains increased with increasing loads. At low loads the extracellular matrix (ECM) strains in the superficial zone were greater than the applied tissue strains, while at extreme loads, the local ECM strains were smaller than the applied strains. Cell compressive strains were always smaller than the applied tissue strains and, in our intact, in situ preparation, were substantially smaller than those previously found in hemi-cylindrical explants. This resulted in markedly different steady-state cell volume changes in the current study compared to those working with cartilage explants. Additionally, cells from different regions in the knee exhibited striking differences in deformation behavior under load. The current results suggest: (i) that the local extracellular and pericellular matrix environment is intimately linked to chondrocyte mechanobiology, protecting chondrocytes from potentially damaging strains at high tissue loads; and (ii) that cell mechanics are a function of applied load and local cartilage tissue structure.

Potassium channels in articular chondrocytes

Chondrocytes are the resident cells of cartilage, which synthesize and maintain the extracellular matrix. The range of known potassium channels expressed by these unique cells is continually increasing. Since chondrocytes are non-excitable, and do not need to be repolarized following action potentials, the function of potassium channels in these cells has, until recently, remained completely unknown. However, recent advances in both traditional physiology and “omic” technologies have enhanced our knowledge and understanding of the chondrocyte channelome. A large number of potassium channels have been identified and a number of putative, but credible, functions have been proposed. Members of each of the potassium channel sub-families (calcium activated, inward rectifier, voltage-gated and tandem pore) have all been identified. Mechanotransduction, cell volume regulation, apoptosis and chondrogenesis all appear to involve potassium channels. Since evidence suggests that potassium channel gene transcription is altered in osteoarthritis, future studies are needed that investigate potassium channels as potential cellular biomarkers and therapeutic targets for treatment of degenerative joint conditions.

Cell volume regulation in chondrocytes

Chondrocytes are the cells within cartilage which produce and maintain the extracellular matrix. Volume regulation in these cells is vital to their function and occurs in several different physiological and pathological contexts. Firstly, chondrocytes exist within an environment of changing osmolarity and compressive loads. Secondly, in osteoarthritic joint failure, cartilage water content changes and there is a notable increase in chondrocyte apoptosis. Thirdly, endochondral ossification requires chondrocyte swelling in association with hypertrophy. Regulatory volume decrease (RVD) and regulatory volume increase (RVI) have both been observed in articular chondrocytes and this review focuses on the mechanisms identified to account for these. There has been evidence so far to suggest TRPV4 is central to RVD; however other elements of the pathway have not yet been identified. Unlike RVD, RVI appears less robust in articular chondrocytes and there have been fewer mechanistic studies; the primary focus being on the Na(+)-K(+)-2Cl(-) co-transporter. The clinical significance of chondrocyte volume regulation remains unproven. Importantly however, transcript abundances of several ion channels implicated in volume control are changed in chondrocytes from osteoarthritic cartilage. A critical question is whether disturbances of volume regulation mechanisms lead to, result from or are simply coincidental to cartilage damage.

Pneumatic pressure bioreactor for cyclic hydrostatic stress application: mechanobiology effects on periodontal ligament cells

A bioreactor system was developed to provide high-amplitude cyclic hydrostatic compressive stress (cHSC) using compressed air mixed commercially as needed to create partial pressures of oxygen and carbon dioxide appropriate for the cells under investigation. Operating pressures as high as 300 psi are achievable in this system at cyclic speeds of up to 0.2 Hz. In this study, ligamentous fibroblasts from human periodontal ligaments (n = 6) were compressed on two consecutive days at 150 psi for 3 h each day, and the mRNA for families of extracellular matrix protein and protease isoforms was evaluated by real-time PCR array. Several integrins were significantly upregulated, most notably alpha-3 (6.4-fold), as was SPG7 (12.1-fold). Among the collagens, Col8a1 was highly upregulated at 53.5-fold, with Col6a1, Col6a2, and Col7a1 also significantly upregulated 4.4- to 8.5-fold. MMP-1 was the most affected at 122.9-fold upregulation. MMP-14 likewise increased 17.8-fold with slight reductions for the gelatinases and a significant increase of TIMP-2 at 5.8-fold. The development of this bioreactor system and its utility in characterizing periodontal ligament fibroblast mechanobiology in intermediate-term testing hold promise for better simulating the conditions of the musculoskeletal system and the large cyclic compressive stresses joints may experience in gait, exertion, and mastication.

The Intrinsic Incompressibility of Osteoblast-like Cells

This paper presents a new methodology, apparatus design, and the experimental results of ongoing research into the measurement of the mechanical properties of musculoskeletal tissue at the cellular level. A microchamber was constructed that provides a controlled hydrostatic pressure environment for these cells where optical sectioning, via epifluorescence microscopy, was used to acquire volume information about the individual cell. The microchamber was integrated into a hydraulic system that, via computer control, provided a regulated adjustable hydrostatic pressure environment for living cells suspended in culture media. The techniques applied in this study include fluorescent labeling of the cell volume, hydrostatic pressure application, optical sectioning, and digital volume reconstruction. To determine the mechanical response (compressibility) of cultured MG-63 osteoblast-like cells under physiologically high hydrostatic pressures two experiments were devised: In the first experiment changes in volume of 10 cells were measured as the applied hydrostatic pressure was increased from 0 to 7 MPa. Volume changes in response to pressure magnitudes were not significant (p > 0.49). In the second experiment, the mechanical role of the plasma membrane to act as a supportive component in cell compressibility was studied by permeabilizing the membrane of six cells and again applying hydrostatic pressure. Again, no significant volume differences between pressurized and unpressurized cells were found (p > 0.46). A retrospective power analysis of the results of the first and second experiments indicates that the sample size was sufficient. The results of this study show that MG-63 osteoblast-like cells are intrinsically incompressible in the 0-7 MPa hydrostatic pressure range. They also support the hypothesis that the plasma membrane plays an insignificant mechanical role in terms of cell compressibility.

The effects of dynamic loading on the intervertebral disc

Loading is important to maintain the balance of matrix turnover in the intervertebral disc (IVD). Daily cyclic diurnal assists in the transport of large soluble factors across the IVD and its surrounding circulation and applies direct and indirect stimulus to disc cells. Acute mechanical injury and accumulated overloading, however, could induce disc degeneration. Recently, there is more information available on how cyclic loading, especially axial compression and hydrostatic pressure, affects IVD cell biology. This review summarises recent studies on the response of the IVD and stem cells to applied cyclic compression and hydrostatic pressure. These studies investigate the possible role of loading in the initiation and progression of disc degeneration as well as quantifying a physiological loading condition for the study of disc degeneration biological therapy. Subsequently, a possible physiological/beneficial loading range is proposed. This physiological/beneficial loading could provide insight into how to design loading regimes in specific system for the testing of various biological therapies such as cell therapy, chemical therapy or tissue engineering constructs to achieve a better final outcome. In addition, the parameter space of 'physiological' loading may also be an important factor for the differentiation of stem cells towards most ideally 'discogenic' cells for tissue engineering purpose.

A Finite Element Model of Cell-Matrix Interactions to Study the Differential Effect of Scaffold Composition on Chondrogenic Response to Mechanical Stimulation

Mechanically induced cell deformations have been shown to influence chondrocyte response in 3D culture. However, the relationship between the mechanical stimulation and cell response is not yet fully understood. In this study a finite element model was developed to investigate cell-matrix interactions under unconfined compression conditions, using a tissue engineered encapsulating hydrogel seeded with chondrocytes. Model predictions of stress and strain distributions within the cell and on the cell boundary were shown to exhibit space-dependent responses that varied with scaffold mechanical properties, the presence of a pericellular matrix (PCM), and the cell size. The simulations predicted that when the cells were initially encapsulated into the hydrogel scaffolds, the cell size hardly affected the magnitude of the stresses and strains that were reaching the encapsulated cells. However, with the inclusion of a PCM layer, larger cells experienced enhanced stresses and strains resulting from the mechanical stimulation. It was also noted that the PCM had a stress shielding effect on the cells in that the peak stresses experienced within the cells during loading were significantly reduced. On the other hand, the PCM caused the stresses at the cell-matrix interface to increase. Based on the model predictions, the PCM modified the spatial stress distribution within and around the encapsulated cells by redirecting the maximum stresses from the periphery of the cells to the cell nucleus. In a tissue engineered cartilage exposed to mechanical loading, the formation of a neo-PCM by encapsulated chondrocytes appears to protect them from initially excessive mechanical loading. Predictive models can thus shed important insight into how chondrocytes remodel their local environment in order to redistribute mechanical signals in tissue engineered constructs.