Fresh bone marrow introduction into porous scaffolds using a simple low-pressure loading method for effective osteogenesis in a rabbit model

3D Culture Modeling of Metastatic Breast Cancer Cells in Additive Manufactured Scaffolds

Cancer biology research is increasingly moving toward innovative in vitro 3D culture models, as conventional and current 2D cell cultures fail to resemble in vivo cancer biology. In the current study, porous 3D scaffolds, designed with two different porosities along with 2D tissue culture polystyrene (TCP) plates were used with a model breast cancer human cell line. The 3D engineered system was evaluated for the optimal seeding method (dynamic versus static), adhesion, and proliferation rate of MDA-MB-231 breast cancer cells. The expression profiles of proliferation-, stemness-, and dormancy-associated cancer markers, namely, ki67, lamin A/C, SOX2, Oct3/4, stanniocalcin 1 (STC1), and stanniocalcin 2 (STC2), were evaluated in the 3D cultured cells and compared to the respective profiles of the cells cultured in the conventional 2D TCP. Our data suggested that static seeding was the optimal seeding method with porosity-dependent efficiency. Moreover, cells cultured in 3D scaffolds displayed a more dormant phenotype in comparison to 2D, which was manifested by the lower proliferation rate, reduced ki67 expression, increased lamin A/C expression, and overexpression of STCs. The possible relationship between the cell affinity to different extracellular matrix (ECM) proteins and the RANK expression levels was also addressed after deriving collagen type I (COL-I) and fibronectin (FN) MDA-MB-231 filial cell lines with enhanced capacity to attach to the respective ECM proteins. The new derivatives exhibited a more mesenchymal like phenotype and higher RANK levels in relation to the parental cells, suggesting a relationship between ECM cell affinity and RANK expression. Therefore, the present 3D cell culture model shows that cancer cells on printed scaffolds can work as better representatives in cancer biology and drug screening related studies.

Comparison of amniotic membrane versus the induced membrane for bone regeneration in long bone segmental defects using calcium phosphate cement loaded with BMP-2

Thanks to its biological properties, the human amniotic membrane (HAM) combined with a bone substitute could be a single-step surgical alternative to the two-step Masquelet induced membrane (IM) technique for regeneration of critical bone defects. However, no study has directly compared these two membranes. We first designed a 3D-printed scaffold using calcium phosphate cement (CPC). We assessed its suitability in vitro to support human bone marrow mesenchymal stromal cells (hBMSCs) attachment and osteodifferentiation. We then performed a rat femoral critical size defect to compare the two-step IM technique with a single-step approach using the HAM. Five conditions were compared. Group 1 was left empty. Group 2 received the CPC scaffold loaded with rh-BMP2 (CPC/BMP2). Group 3 and 4 received the CPC/BMP2 scaffold covered with lyophilized or decellularized/lyophilized HAM. Group 5 underwent a two- step induced membrane procedure with insertion of a polymethylmethacrylate (PMMA) spacer followed by, after 4 weeks, its replacement with the CPC/BMP2 scaffold wrapped in the IM. Micro-CT and histomorphometric analysis were performed after six weeks. Results showed that the CPC scaffold supported the proliferation and osteodifferentiation of hBMSCs in vitro. In vivo, the CPC/BMP2 scaffold very efficiently induced bone formation and led to satisfactory healing of the femoral defect, in a single-step, without autograft or the need for any membrane covering. In this study, there was no difference between the two-step induced membrane procedure and a single step approach. However, the results indicated that none of the tested membranes further enhanced bone healing compared to the CPC/BMP2 group.

Injectable, scalable 3D tissue-engineered model of marrow hematopoiesis

Modeling the interaction between the supportive stroma and the hematopoietic stem and progenitor cells (HSPC) is of high interest in the regeneration of the bone marrow niche in blood disorders. In this work, we present an injectable co-culture system to study this interaction in a coherent in vitro culture and in vivo transplantation model. We assemble a 3D hematopoietic niche in vitro by co-culture of supportive OP9 mesenchymal cells and HSPCs in porous, chemically defined collagen-coated carboxymethylcellulose microscaffolds (CCMs). Flow cytometry and hematopoietic colony forming assays demonstrate the stromal supportive capacity for in vitro hematopoiesis in the absence of exogenous cytokines. After in vitro culture, we recover a paste-like living injectable niche biomaterial from CCM co-cultures by controlled, partial dehydration. Cell viability and the association between stroma and HSPCs are maintained in this process. After subcutaneous injection of this living artificial niche in vivo, we find maintenance of stromal and hematopoietic populations over 12 weeks in immunodeficient mice. Indeed, vascularization is enhanced in the presence of HSPCs. Our approach provides a minimalistic, scalable, biomimetic in vitro model of hematopoiesis in a microcarrier format that preserves the HSPC progenitor function, while being injectable in vivo without disrupting the cell-cell interactions established in vitro.

Advantages of creation of holes and removal of air in artificial bone for early bone formation when used artificial bone as a gap filler in open wedge high tibial osteotomy

Recently, many facilities perform open wedge high tibial osteotomy (OWHTO) using artificial bone as a gap filler. However, there are many cases in which artificial bone is used without a clear purpose. We recommend a surgical technique to promote early synostosis between artificial bone and recipient bone due to mechanical support especially in the early stage after OWHTO. At our hospital, beta-tricalcium phosphate (β-TCP) with 60% porosity is used in OWHTO. Initially, a wedge-shaped block-type β-TCP, as large as possible, was inserted into the gap. However, from the standpoint of initial mechanical support, we changed the artificial bone size and created intentional holes. Furthermore, we removed air bubbles from β-TCP. We evaluated the synostosis on the basis of clinical results and diagnostic imaging. As a result of creating holes and removing air from the artificial bone, a trend toward faster synostosis was noted, especially at the early stage. No adverse events such as tibial plateau fracture, lateral cortical fracture, plate and screw failure and correction loss due to reducing the size of the artificial bone occurred, but placement of the artificial bone in contact with cortical bone and surface contact installation with the recipient bone tissue was important. When using artificial bone in OWHTO, holes formation and removal of air from the artificial bone are recommended for faster synostosis between artificial bone and recipient bone in the early stage after surgery. Artificial bone should be used, with attention to its positioning and shape, for efficient mechanical support.

Calcium Concentration in Culture Medium as a Nondestructive and Rapid Marker of Osteogenesis

Artificial bones made of β-tricalcium phosphate (β-TCP) combined with bone marrow-derived mesenchymal stromal cells (BM-MSCs) are used for effective reconstruction of bone defects caused by genetic defects, traumatic injury, or surgical resection of bone tumors. However, the selection of constructs with high osteogenic potential before implantation is challenging. The purpose of this study was to determine whether the calcium concentration in BM-MSC culture medium can be used as a nondestructive and simple osteogenic marker for selecting tissue-engineered grafts constructed using β-TCP and BM-MSCs. We prepared three cell passages of BM-MSCs derived from three 7-week-old, male Fischer 344 rats; the cells were cultured in osteoinductive medium in the presence of β-TCP for 15 days. The medium was replaced with fresh medium on day 1 in culture and subsequently changed every 48 h; it was collected for measurement of osteocalcin secretion and calcium concentration by enzyme-linked immunosorbent assay and X-ray fluorescence spectrometry, respectively. After cultivation, the constructs were implanted subcutaneously into the backs of recipient rats. Four weeks after implantation, the alkaline phosphatase (ALP) activity and osteocalcin content of the constructs were measured. A strong inverse correlation was observed between the calcium concentration in the medium and the ALP activity and osteocalcin content of the constructs, with Pearson's correlation coefficients of 0.92 and 0.90, respectively. These results indicate that tissue-engineered bone with high osteogenic ability can be selected before implantation based on low calcium content of the culture medium, resulting in successful bone formation after implantation. This nondestructive, simple method shows great promise for assessing the osteogenic ability of tissue-engineered bone.

Dexamethasone enhances osteogenic differentiation of bone marrow- and muscle-derived stromal cells and augments ectopic bone formation induced by bone morphogenetic protein-2

We evaluated whether dexamethasone augments the osteogenic capability of bone marrow-derived stromal cells (BMSCs) and muscle tissue-derived stromal cells (MuSCs), both of which are thought to contribute to ectopic bone formation induced by bone morphogenetic protein-2 (BMP-2), and determined the underlying mechanisms. Rat BMSCs and MuSCs were cultured in growth media with or without 10-7 M dexamethasone and then differentiated under osteogenic conditions with dexamethasone and BMP-2. The effects of dexamethasone on cell proliferation and osteogenic differentiation, and also on ectopic bone formation induced by BMP-2, were analyzed. Dexamethasone affected not only the proliferation rate but also the subpopulation composition of BMSCs and MuSCs, and subsequently augmented their osteogenic capacity during osteogenic differentiation. During osteogenic induction by BMP-2, dexamethasone also markedly affected cell proliferation in both BMSCs and MuSCs. In an in vivo ectopic bone formation model, bone formation in muscle-implanted scaffolds containing dexamethasone and BMP-2 was more than two fold higher than that in scaffolds containing BMP-2 alone. Our results suggest that dexamethasone potently enhances the osteogenic capability of BMP-2 and may thus decrease the quantity of BMP-2 required for clinical application, thereby reducing the complications caused by excessive doses of BMP-2.

Highlights: 1. Dexamethasone induced selective proliferation of bone marrow- and muscle-derived cells with higher differentiation potential. 2. Dexamethasone enhanced the osteogenic capability of bone marrow- and muscle-derived cells by altering the subpopulation composition. 3. Dexamethasone augmented ectopic bone formation induced by bone morphogenetic protein-2.

Static versus vacuum cell seeding on high and low porosity ceramic scaffolds

An adequate cell seeding technique is essential for effective bone regeneration on cell seeded constructs of porous tricalcium phosphates. In previous studies, dynamic cell seeding, in which an external force is applied to seed cells on a biomaterial, resulted in more homogeneous cell seeding in low porosity scaffolds than static seeding. The optimal cell seeding technique for high porosity scaffolds has not been defined yet. Human mesenchymal stem cells were isolated from bone marrow and characterized. The cells were seeded on low porosity (45%) and high porosity (90%) tricalcium phosphate scaffolds using a static and a vacuum seeding technique. LIVE/DEAD® staining of the cell-scaffold complexes followed by confocal laser scanning microscopy was used to measure cell proliferation, cell distribution and cell viability one, three and seven days after seeding. Cell proliferation was also quantified using a DNA quantification assay. Neither static nor vacuum seeding resulted in homogeneous cell seeding on both low and high porosity scaffolds. Cell density was lower on the inside than on the outside of the scaffolds. On low porosity scaffolds, the vacuum method yielded the highest numbers of cells compared to the static method. Low porosity scaffolds were seeded most homogeneously using the static seeding method. Seven days after seeding, numbers of adherent cells were comparable for both scaffold types and independent of the cell seeding technique used. In conclusion, on high porosity scaffolds, static seeding results in more homogeneous cell seeding and it is easier to use than a vacuum seeding technique.

After repeated division, bone marrow stromal cells express inhibitory factors with osteogenic capabilities, and EphA5 is a primary candidate

The differentiation capability of human bone marrow stromal cells (hBMSCs) is thought to deteriorate over multiple doubling processes. To clarify the deterioration mechanisms, the multilineage differentiation capabilities of short- and long-term passaged BMSCs were compared. Predictably, long-term passaged BMSCs showed reduced differentiation capacities compared to short-term passaged cells. Furthermore, a non-human primate heterotopic bone formation model demonstrated that long-term passaged BMSCs have bone formation capabilities but also exert inhibitory effects on bone formation. This finding indicated that long-term passaged BMSCs express higher levels of inhibitory factors than short-term passaged BMSCs do. Co-culture assays of short- and long-term passaged BMSCs suggested that the inhibitory signals required cell-cell contact and would therefore be expressed on the cell membrane. A microarray analysis of BMSCs identified ephrin type-A receptor 5 (EphA5) as an inhibitory factor candidate. Quantitative PCR revealed that among all members of the ephrin and Eph receptor families, only the expression of EphA5 was increased by BMSC proliferation. A gene knockdown analysis using siRNAs demonstrated that knockdown of EphA5 gene expression in long-term passaged BMSCs led to an increase in ALP mRNA expression. These results indicate that EphA5 may be a negative regulator of bone formation. A better understanding of the roles of the ephrin and Eph receptor families in hBMSCs may lead to alternative approaches for manipulating hBMSC fate. In addition, this avenue of discovery may provide new therapeutic targets and quality-control markers of the osteogenic differentiation capabilities of hBMSCs.

Massive bone reconstruction with heat-treated bone graft loaded autologous bone marrow-derived stromal cells and β-tricalcium phosphate composites in canine models

Bone marrow-derived stromal cells (BMSCs) contain mesenchymal stem cells that are capable of forming various mesenchymal tissues. We hypothesized that BMSCs and β-tricalcium phosphate (β-TCP) composites would promote the remodeling of large-sized autologous devitalized bone grafts; therefore, the aim of this study was to evaluate the effects of the composites on the remodeling of autologous devitalized bone grafts. Autologous BMSCs cultured in culture medium containing dexamethasone (10(-7)  M) were loaded into porous β-TCP granules under low-pressure. Theses BMSC/TCP composites were put into the bone marrow cavity of autologous heat-treated bone (femoral diaphysis, 65-mm long, 100°C, 30 min) and put back to the harvest site. In the contralateral side, β-TCP without BMSC were used in the same manner as the opposite side as the control. Treatment with the BMSC/TCP composites resulted in a significant increase in thickness, bone mineral density, and matured bone volume of the cortical bone at the center of the graft compared to the control. Histological analysis showed matured regenerated bone in the BMSC loaded group. These results indicate that BMSC/TCP composites facilitated bone regeneration and maturation at the graft site of large-sized devitalized bone. This method could potentially be applied for clinical use in the reconstruction of large bone defects such as those associated with bone tumors.

Local injection of lovastatin in biodegradable polyurethane scaffolds enhances bone regeneration in a critical-sized segmental defect in rat femora

Statins, a class of naturally-occurring compounds that inhibit HMG-CoA reductase, are known to increase endogenous bone morphogenetic protein-2 (BMP-2) expression. Local administration of statins has been shown to stimulate fracture repair in in vivo animal experiments. However, the ability of statins to heal more challenging critical-sized defects at the mid-diaphyseal region in long bones has not been investigated. In this study, we examined the potential of injectable lovastatin microparticles combined with biodegradable polyurethane (PUR) scaffolds in preclinical animal models: metaphyseal small plug defects and diaphyseal segmental bone defects in rat femora. Sustained release of lovastatin from the lovastatin microparticles was achieved over 14 days. The released lovastatin was bioactive, as evidenced by its ability to stimulate BMP-2 gene expression in osteoblastic cells. Micro-computed tomography (CT) and histological examinations showed that lovastatin microparticles, injected into PUR scaffolds implanted in femoral plug defects, enhanced new bone formation. Furthermore, bi-weekly multiple injections of lovastatin microparticles into PUR scaffolds implanted in critical-sized femoral segmental defects resulted in increased new bone formation compared to the vehicle control. In addition, bridging of the defect with newly formed bone was observed in four of nine defects in the lovastatin microparticle treatment group, whereas none of the defects in the vehicle group showed bridging. These observations suggest that local delivery of lovastatin combined with PUR scaffold can be an effective approach for treatment of orthopaedic bone defects and that multiple injections of lovastatin may be useful for large defects.

Porous scaffold architecture guides tissue formation

Critical-sized bone defect regeneration is a remaining clinical concern. Numerous scaffold-based strategies are currently being investigated to enable in vivo bone defect healing. However, a deeper understanding of how a scaffold influences the tissue formation process and how this compares to endogenous bone formation or to regular fracture healing is missing. It is hypothesized that the porous scaffold architecture can serve as a guiding substrate to enable the formation of a structured fibrous network as a prerequirement for later bone formation. An ovine, tibial, 30-mm critical-sized defect is used as a model system to better understand the effect of the scaffold architecture on cell organization, fibrous tissue, and mineralized tissue formation mechanisms in vivo. Tissue regeneration patterns within two geometrically distinct macroscopic regions of a specific scaffold design, the scaffold wall and the endosteal cavity, are compared with tissue formation in an empty defect (negative control) and with cortical bone (positive control). Histology, backscattered electron imaging, scanning small-angle X-ray scattering, and nanoindentation are used to assess the morphology of fibrous and mineralized tissue, to measure the average mineral particle thickness and the degree of alignment, and to map the local elastic indentation modulus. The scaffold proves to function as a guiding substrate to the tissue formation process. It enables the arrangement of a structured fibrous tissue across the entire defect, which acts as a secondary supporting network for cells. Mineralization can then initiate along the fibrous network, resulting in bone ingrowth into a critical-sized defect, although not in complete bridging of the defect. The fibrous network morphology, which in turn is guided by the scaffold architecture, influences the microstructure of the newly formed bone. These results allow a deeper understanding of the mode of mineral tissue formation and the way this is influenced by the scaffold architecture. © 2012 American Society for Bone and Mineral Research.

The effect of fresh bone marrow cells on reconstruction of mouse calvarial defect combined with calvarial osteoprogenitor cells and collagen-apatite scaffold

Fresh bone marrow cells have already exhibited its advantages as osteogenic donor cells, but the combination between fresh bone marrow cells and other donor cells utilized for bone healing has not been fully explored. To highlight the impact of fresh bone marrow cells on scaffold-based bone regeneration, single or a combination of calvarial osteoprogenitor cells (OPCs) and bone marrow cells (BMCs) were used as donor cells combined with collagen-apatite scaffold for calvarial defect healing. The host and donor contributions to bone formation were assessed using histological and GFP imaging analysis. Although the amount of new bone formed by different cell sources did not show significant differences, the origin of the bone formation in the defects mainly depended on the types of donor cells employed: when only calvarial OPCs were used as donor cells, a donor-derived bone healing instead of host-derived bone ingrowth was observed; when only fresh BMCs were loaded, the host bone could grow into the defect along the lamellar structure of the scaffolds, but the amount of new bone formed was significantly lower than the defect loaded with calvarial OPCs only. The combination of calvarial OPCs and fresh BMCs had similar amount of new bone formation as the group loaded with calvarial osteoprogenitors alone, but did not induce any host-derived bone formation. These results provide compelling evidence of the importance of fresh BMCs to induce host-implant integration in bone tissue engineering.

Rat bone marrow stromal cells-seeded porous gelatin/tricalcium phosphate/oligomeric proanthocyanidins composite scaffold for bone repair

Repair of bone defects remains a major challenge in orthopaedic surgery. Bone tissue engineering is an attractive approach for treating bone loss in various shapes and amounts. The aim of this study was to prepare and evaluate the feasibility of a porous scaffold, which was composed of oligomeric proanthocyanidin crosslinked gelatin mixed with β-tricalcium phosphate (GTP) and was seeded with bone marrow stromal cells (BMSCs) as a bone substitute. GTP scaffolds were made porous using a salt-leaching method. The physicochemical properties of the scaffold were evaluated to determine the optimal salt:composite weight ratio. The results indicated that the GTP scaffold had a favourable macroporous structure and higher porosity when the salt:composite weight ratio was 4:1. Cytotoxic tests demonstrated that extracts from the GTP scaffolds promoted the proliferation of BMSCs. Rat BMSCs were seeded on a GTP scaffold and cultured in a spinner flask. After 2 weeks of culture, scanning electron microscopy observation showed that the cells adhered well to the surfaces of the pores in the scaffold. Moreover, this study explored the biological response of rat calvarial bone to the scaffold to evaluate its potential in bone tissue engineering. Bone defects were filled with BMSC-seeded GTP scaffold and acellular GTP scaffold. After 8 weeks, the scaffold induced new bone formation at a bone defect, as was confirmed by X-ray microradiography and histology. The BMSC-seeded scaffold induced more new bone formation than did an acellular scaffold. These observations suggest that the BMSCs-seeded GTP scaffold can promote the regeneration of defective bone tissue.

Hybrid grafting using bone marrow aspirate combined with porous β-tricalcium phosphate and trephine bone for lumbar posterolateral spinal fusion: a prospective, comparative study versus local bone grafting

STUDY DESIGN

A prospective, comparative study.

OBJECTIVE

We developed a hybrid graft (HBG) of porous β-tricalcium phosphate ceramics/percutaneously harvested bone sticks/autologous bone marrow aspirate for lumbar posterolateral fusion (PLF). The aim of this study was to investigate the efficacy of the HBG as a substitute for conventional corticocancellous iliac autografts.

SUMMARY OF BACKGROUND DATA

Iliac crest bone graft (ICBG) has been traditionally used as the golden standard for lumbar spinal fusion. The significant complication rate associated with harvesting corticocancellous ICBG, however, has encouraged development of alternative graft substitutes.

METHODS

From September 2005, 61 consecutive patients underwent decompressive laminotomy and 1-level instrumented PLF. Each patient in this study had the constructs of the HBG placed on 1 side of the intertransverse process gutter. An autologous local bone graft (LBG) harvested during decompressive laminotomy was placed on the other side as a control. Radiographic evaluation was performed at 6 months, 1 year after surgery, and subsequently on an annual basis. The fusion statuses on either side of vertebra were compared.

RESULTS

The flexion-extension motion in the dynamic x-rays at the target level decreased over time. Only 1 case exhibited over 5° of angular motion 2 years after surgery. In the evaluation of fusion status, the fusion rate for the HBG side (68.9% at 6 months, 83.6% at 1 year, 93.5% at 2 years) was higher than that for the LBG side (49.2% at 6 months, 75.4% at 1 year, 89.1% at 2 years) with a significant difference at 6 months after surgery. No significant complications at the donor site were found postoperatively.

CONCLUSION

The HBG promoted posterolateral spinal fusion without significant donor site morbidity. Because of its efficacy and safety, this hybrid construct seems promising as an alternative to conventional iliac bone grafts for lumbar spinal fusion.

A bioactive and bioresorbable porous cubic composite scaffold loaded with bone marrow aspirate: a potential alternative to autogenous bone grafting

STUDY DESIGN

Experimental animal study.

OBJECTIVE

To investigate the osteogenic properties of a particulate uncalcined, unsintered hydroxyapatite/polydllactide (u-HA/PdlLA) composite scaffold loaded with bone marrow aspirate (BMA).

SUMMARY OF BACKGROUND DATA

Because of the high morbidity associated with bone graft harvesting, current research in spine surgery has largely focused on bone graft alternatives involving a combination of scaffolds and osteogenic substances. BMA is obtained by a simple and relatively noninvasive method and can easily be clinically applied as an osteogenic material. However, few studies have reported successful posterolateral spinal fusion (PLF) with BMA-loaded synthetic materials.

METHODS

Porous u-HA/PdlLA composites loaded with BMA were used as bone graft substitutes. In experiment 1, porous u-HA/PdlLA cylinders containing or lacking BMA were implanted in rabbit muscles. They were retrieved 4, 8, and 12 weeks after implantation, and ectopic bone formation was histologically evaluated. In experiment 2, 48 rabbits underwent PLF with 1 of 4 bone grafts: autogenous bone (group 1); single-strip u-HA/PdlLA alone (group 2); morselized u-HA/PdlLA + BMA (group 3); or single-strip u-HA/PdlLA + BMA (group 4). After 12 weeks, fusion was assessed by manual palpation, microcomputed tomography, mechanical tests, and histologic examination.

RESULTS

In experiment 1, ectopic bone formation was observed in BMA-loaded u-HA/PdlLA, and the new bone area increased until 12 weeks after implantation. In experiment 2, the fusion rates in groups 1, 2, 3, and 4 were 58.3%, 16.7%, 66.7%, and 91.7%, respectively, as determined by manual palpation, and 66.7%, 16.7%, 75.0%, and 91.7%, respectively, as determined by microcomputed tomography. The mechanical strength was significantly greater in group 4 than in the other groups (P < 0.05).

CONCLUSION

Conclusion. Our results indicate that BMA-loaded porous μ-HA/PdlLA is an effective alternative to autogenous bone grafts. The structure and composition of porous u-HA/PdlLA render it an effective scaffold for BMA.

Efficient Cell-seeding into Scaffolds Improves Bone Formation

Bone marrow stromal cells (BMSCs)/β-tricalcium phosphate (β-TCP) composites have attracted a great deal of attention in bone tissue engineering. If more effective bone regeneration is to be achieved, efficient cell-seeding systems need to be clarified. In this study, we investigated the number of cells contained in composites, and the in vitro/vivo osteogenic differentiation capacity of composites using 4 conventional systems of seeding rat BMSCs into β-TCP: soak, low-pressure, pipette, and syringe systems. The highest number of cells was contained in the composites from the syringe group. Moreover, after two-week osteogenic induction in vitro, the composites in the syringe group exhibited the highest osteogenic potential, which continued at 8 weeks after subcutaneous implantation in vivo. Our results indicated that efficient and appropriate cell-seeding could improve in vitro/vivo bone formation in composites and thus make a potential clinical contribution to successful bone tissue engineering. Abbreviations: BMSCs, bone marrow stromal cells; β-TCP, β-tricalcium phosphate; S-D, Sprague-Dawley; kPa, kilopascal; ALP, alkaline phosphatase; N, Newton; DNA, deoxyribonucleic acid; OCN, osteocalcin; ANOVA, analysis of variance; PLSD, protected least-significant difference; and HE, hematoxylin and eosin.

Developing a quantitative measurement system for assessing heterotopic ossification and monitoring the bioelectric metrics from electrically induced osseointegration in the residual limb of service members

Poor prosthetic fit is often the result of heterotopic ossification (HO), a frequent problem following blast injuries for returning service members. Osseointegration technology offers an advantage for individuals with significant HO and poor socket tolerance by using direct skeletal attachment of a prosthesis to the distal residual limb, but remains limited due to prolonged post-operative rehabilitation regimens. Therefore, electrical stimulation has been proposed as a catalyst for expediting skeletal attachment and the bioelectric effects of HO were evaluated using finite element analysis in 11 servicemen with transfemoral amputations. Retrospective computed tomography (CT) scans provided accurate reconstructions, and volume conductor models demonstrated the variability in residual limb anatomy and necessity for patient-specific modeling to characterize electrical field variance if patients were to undergo a theoretical osseointegration of a prosthesis. In this investigation, the volume of HO was statistically significant when selecting the optimal potential difference for enhanced skeletal fixation, since higher HO volumes required increased voltages at the periprosthetic bone (p = 0.024, r = 0.670). Results from Spearman's rho correlations also indicated that the age of the subject and volume of HO were statistically significant and inversely proportional, in which younger service members had a higher frequency of HO (p = 0.041, r = -0.622). This study demonstrates that the volume of HO and age may affect the voltage threshold necessary to improve current osseointegration procedures.