Low-magnitude high-frequency loading via whole body vibration enhances bone-implant osseointegration in ovariectomized rats

EnduroBone: A 3D printed bioreactor for extended bone tissue culture

Studies of the effects of external stimuli on bone tissue, disease transmission mechanisms, and potential medication discoveries benefit from long-term tissue viability ex vivo. By simulating the in-vivo environment, bioreactors are essential for studying bone cellular activity throughout biological processes. We present the development of an automated 3D-printed bioreactor EnduroBone designed to sustain the ex-vivo viability of 10 mm diameter cancellous bone cores for an extended period. The device is supplied with two critical parameters for maintaining bone tissue viability: closed-loop continuous flow perfusion of 1 mL/min for nutrient diffusion and waste removal and direct mechanical stimulation with cyclic compression at 13.2 RPM (revolutions per minute) to promote cell viability which can lead to improved tissue stability during ex vivo culturing. The bioreactor addresses several limitations of existing systems and provides a versatile open-source platform for bone cancer research, orthopedic device testing, and other related applications. To validate the bioreactor, fresh swine samples were cultured ex-vivo, and their cell viability was determined to be maintained for up to 28 days. Periodic cell viability assessment through live/dead cell staining and confocal imaging at the start (0 days) and at several time points throughout the culture period (7, 14, 21, and 28 days) was used to demonstrate EnduroBone effectiveness in sustaining bone cell health for the extended period tested.

Effects of whole-body vibration at different periods on lumbar vertebrae in female rats

The current study aimed to investigate the effects of whole-body vibration (WBV) before and after ovariectomy on lumbar vertebrae, and to observe whether the positive effects of WBV before and after ovariectomy on lumbar vertebrae in rats could be maintained after vibration stopped. Three-month-old female rats were divided into four groups (n = 45/group): control (CON), ovariectomy (OVA), WBV before ovariectomy (WBV-BO), and WBV after ovariectomy (WBV-AO) groups. For 1-8 weeks, WBV-BO group was subjected to vertical WBV. At the 9th week, the rats in WBV-BO, WBV-AO, and OVA groups were ovariectomized. During 11-18 weeks, WBV-AO group was subjected to vibration. For 19-26 weeks, no intervention was done for rats. The lumbar vertebrae were examined by Micro-CT, compressive test, creep test, and microindentation test. At the 8th week, the displacement of the L1-L2 annulus fibrosus in WBV-BO group was 18% smaller compared with CON group (p<0.05). At the 18th week, the elastic modulus of the L5 vertebral body in WBV-BO and WBV-AO groups was 53% and 57% higher than that in CON group, respectively (p<0.05); the displacement of the L1-L2 annulus fibrosus in WBV-BO group was 25% smaller than those in the other groups (p<0.05). At the 26th week, there was no significant difference in the displacement of the L1-L2 annulus fibrosus between WBV-BO group and other groups (p>0.05); the elastic modulus of the L5 vertebral body had no significant difference between WBV-AO group and CON group (p>0.05). Our results demonstrated that WBV before ovariectomy effectively prevented disc degeneration with significant effects up to 8 weeks after ovariectomy. The vertebral mechanical properties could be significantly improved by WBV after ovariectomy, but the residual effect did not maintain after WBV stopped.

Effects of orofacial applications of low-magnitude, high-frequency mechanical vibration on cranial sutures and calvarial bones: A micro-computed tomography study in rats

INTRODUCTION

The purpose of this study was to assess the effects of orthodontically aimed low-magnitude, high-frequency mechanical vibration (OLMHFMV) on intact calvarial bone, specifically the parietal and temporal, and cranial sutures, including the sagittal and parietotemporal, of rats in differing stages of growth and development.

METHODS

Forty Wistar rats were divided into 4 groups: 2 control groups and 2 OLMHFMV groups. Subsequently, 0.3 cN of force with a frequency of 30 Hz was applied as OLMHFMV on the temporomandibular joint region in the rats in the OLMHFMV-1 group, with the protocol of 20 min/d for 5 d/wk for 1 month, whereas the rats in the OLMHFMV-2 group received mechanical stimuli for 2 months with the same protocol. Morphometric and structural analyses, including suture width, cranial width and height, bone mineral density, bone volume/tissue volume, trabecular number, trabecular separation, and trabecular thickness analyses, were carried out using micro-computed tomography.

RESULTS

The width of the parietotemporal and sagittal sutures and the cranial height and width increased significantly by OLMHFMV (P <0.021). The structural analysis revealed that trabecular number and trabecular separation increased, whereas trabecular thickness decreased in the OLMHFMV groups compared with the control groups (P <0.048). Bone volume/tissue volume remained unchanged despite reducing the bone mineral density of the OLMHFMV groups.

CONCLUSIONS

OLMHFMV had a potential for modulating sutural and cranial growth in adolescent rats. OLMHFMV increased the structural quality of the temporal and parietal bones. These effects may have clinical implications as a treatment option for patients suffering from craniofacial anomalies such as craniosynostosis or a supportive approach for dentofacial orthodontic treatments.

Does Low-Magnitude High-Frequency Vibration (LMHFV) Worth for Clinical Trial on Dental Implant? A Systematic Review and Meta-Analysis on Animal Studies

Being as a non-pharmacological medical intervention, low-magnitude high-frequency vibration (LMHFV) has shown a positive effect on bone induction and remodeling for various muscle diseases in animal studies, among which dental implants osteointegration were reported to be improved as well. However, whether LMHFV can be clinically used in dental implant is still unknown. In this study, efficacy, parameters and side effects of LMHFV were analyzed via data before 15th July 2020, collecting from MEDLINE/PubMed, Embase, Ovid and Cochrane Library databases. In the screened 1,742 abstracts and 45 articles, 15 animal studies involving 972 implants were included. SYRCLE's tool was performed to assess the possible risk of bias for each study. The GRADE approach was applied to evaluate the quality of evidence. Random effects meta-analysis detected statistically significant in total BIC (P < 0.0001) and BV/TV (P = 0.001) upon loading LMHFV on implants. To conclude, LMHFV played an active role on BIC and BV/TV data according to the GRADE analysis results (medium and low quality of evidence). This might illustrate LMHFV to be a worthy way in improving osseointegration clinically, especially for osteoporosis.

Systematic Review Registration:https://www.crd.york.ac.uk/PROSPERO, identifier: NCT02612389

Influence of Low-Magnitude High-Frequency Vibration on Bone Cells and Bone Regeneration

Bone is a mechanosensitive tissue for which mechanical stimuli are crucial in maintaining its structure and function. Bone cells react to their biomechanical environment by activating molecular signaling pathways, which regulate their proliferation, differentiation, and matrix production. Bone implants influence the mechanical conditions in the adjacent bone tissue. Optimizing their mechanical properties can support bone regeneration. Furthermore, external biomechanical stimulation can be applied to improve implant osseointegration and accelerate bone regeneration. One promising anabolic therapy is vertical whole-body low-magnitude high-frequency vibration (LMHFV). This form of vibration is currently extensively investigated to serve as an easy-to-apply, cost-effective, and efficient treatment for bone disorders and regeneration. This review aims to provide an overview of LMHFV effects on bone cells in vitro and on implant integration and bone fracture healing in vivo. In particular, we review the current knowledge on cellular signaling pathways which are influenced by LMHFV within bone tissue. Most of the in vitro experiments showed that LMHFV is able to enhance mesenchymal stem cell (MSC) and osteoblast proliferation. Furthermore, osteogenic differentiation of MSCs and osteoblasts was shown to be accelerated by LMHFV, whereas osteoclastogenic differentiation was inhibited. Furthermore, LMHFV increased bone regeneration during osteoporotic fracture healing and osseointegration of orthopedic implants. Important mechanosensitive pathways mediating the effects of LMHFV might be the Wnt/beta-catenin signaling pathway, the estrogen receptor (ER) signaling pathway, and cytoskeletal remodeling.

Effect of low-level laser therapy on osseointegration of titanium dental implants in ovariectomized rabbits: biomechanics and micro-CT analysis

PURPOSE

The primary aim of this study is to assess, in an animal model, whether biostimulation of osteoporotic bone with low-level laser therapy improves the osseointegration of dental implants.

MATERIAL AND METHODS

Twenty-two female rabbits were randomly divided into two groups: sham-ovariectomy and bilateral-ovariectomy. Laser therapy was applied to the implants placed in the right tibial bones and was not applied to implants placed in the left tibial bones. The periotest device was used for the stability test. Periotest values were recorded after the implantation (T0) and when the animals were euthanized (T1). The removal torque test and micro-computed tomography examination were evaluated.

RESULTS

As a result of removal torque, the mean of ovariectomy-laser group (56.1 ± 5.1 Ncm) was higher than sham-ovariectomy group (55.4 ± 18.5 Ncm) (p = 0.9). In periotest analysis, a significant difference was found between the values of T1 and T0 in all groups, except sham-ovariectomy group (p < 0.05); and the highest difference was found in the ovariectomy-laser group. Micro-CT examination demonstrated that ovariectomy-laser group showed an increase of implant-bone contact when compared with ovariectomy (p < 0.05).

CONCLUSIONS

The values obtained from biomechanical tests and micro-CT in the ovariectomy-laser group were significantly higher than the ovariectomy group and achieved the values in the healthy bone.

Effects of combined human parathyroid hormone (1-34) and menaquinone-4 treatment on the interface of hydroxyapatite-coated titanium implants in the femur of osteoporotic rats

The objective of this study was to investigate the effects of human parathyroid hormone (1-34) (PTH_1-34; PTH) plus menaquinone-4 (vitamin K₂; MK) on the osseous integration of hydroxyapatite (HA)-coated implants in osteoporotic rats. Ovariectomized female Sprague-Dawley rats were used for the study. Twelve weeks after bilateral ovariectomy, HA-coated titanium implants were inserted bilaterally in the femoral medullary canal of the remaining 40 ovariectomized rats. All animals were then randomly assigned to four groups: Control, MK, PTH and PTH + MK. The rats from groups MK, PTH and PTH + MK received vitamin K₂ (30 mg/kg/day), PTH_1-34 (60 μg/kg, three times a week), or both for 12 weeks. Thereafter, serum levels of γ-carboxylated osteocalcin (Gla-OC) were quantitated by ELISA and the bilateral femurs of rats were harvested for evaluation. The combination of PTH and MK clearly increased the serum levels of Gla-OC (a specific marker for bone formation) compared to PTH or MK alone. The results of our study indicated that all treated groups had increased new bone formation around the surface of implants and increased push-out force compared to Control. In addition, PTH + MK treatment showed the strongest effects in histological, micro-computed tomography and biomechanical tests. In summary, our results confirm that treatment with PTH_1-34 and MK together may have a therapeutic advantage over PTH or MK monotherapy on bone healing around HA-coated implants in osteoporotic rats.

Enhanced bone healing in porous Ti implanted rabbit combining bioactive modification and mechanical stimulation

To improve the bone healing efficiency of porous titanium implants, desired biological properties of implants are mandatory, involving bioactivity, osteoconductivity, osteoinductivity and a stable environment. In this study, bare porous titanium (abbr. pTi) with the porosity of 70% was fabricated by vacuum diffusion bonding of titanium meshes. Hydroxyapatite-coated pTi (abbr. Hap-pTi) was obtained by successively subjecting pTi to alkali heat treatment, pre-calcification and simulated body fluid. Both pTi and Hap-pTi were respectively implanted into the tibia defect model (ϕ10 mm × 6 mm) in New Zealand white rabbits, then subjected to non-invasively axial compressive loads at high-magnitude low-frequency (HMLF), which were denoted as F-pTi and F-Hap-pTi, respectively. Bone repairing efficiencies were analyzed by postoperative X-ray examination, optical observation and HE staining after 14 and 30 days of implantation. ALP and OCN contents in serum were also examined at 30 days. Results showed that the sham group and sham group with mechanical stimulation (abbr. F-sham) preferably caused bone fractures. Qualitatively, Hap-pTi reduced the risk of bone fractures and enhanced bone healing slightly more effectively compared to bared pTi. However, both Hap-pTi combined with mechanical stimulation and F-pTi in the case of bioactive modification could result in a higher bone healing efficiency (F-Hap-pTi). The molecular signaling investigation of ALP and OCN contents in serum further revealed a probable synergistic effect of Hap coating coupling with HMLF compression on improving bone repairing efficiency. It provides a candidate of clinically applicable therapy for osseous defects.

Improved osseointegration with as-built electron beam melted textured implants and improved peri‑implant bone volume with whole body vibration

Transcutaneous osseointegrated prostheses provide stable connections to the skeleton while eliminating skin lesions experienced with socket prosthetics. Additive manufacturing can create custom textured implants capable of interfacing with amputees' residual bones. Our objective was to compare osseointegration of textured surface implants made by electron beam melting (EBM), an additive manufacturing process, to machine threaded implants. Whole body vibration was investigated to accelerate osseointegration. Two cohorts of Sprague-Dawley rats received bilateral, titanium implants (EBM vs. threaded) in their tibiae. One cohort comprising five groups vibrated at 45 Hz: 0.0 (control), 0.15, 0.3, 0.6 or 1.2 g was followed for six weeks. Osseointegration was evaluated through torsional testing and bone volume fraction (BV/TV). A second cohort, divided into two groups (control and 0.6 g), was followed for 24 days and evaluated for resonant frequency, bone-implant contact (BIC) and fluorochrome labeling. The EBM textured implants exhibited significantly improved mechanical stability independent of vibration, highlighting the benefits of using EBM to produce custom textured surfaces. Bone formation on and around the EBM textured implants increased compared to machined implants, as seen by BIC and fluorescence. No difference in torque, BIC or fluorescence among vibration levels was detected. BV/TV significantly increased at 0.6 g compared to control for both implant types.

Effect of high-frequency loading and parathyroid hormone administration on peri-implant bone healing and osseointegration

The objective of this study is to examine the effect of low-magnitude, high-frequency (LMHF) loading, and anti-osteoporosis medications such as parathyroid hormone (PTH) and bisphosphonates on peri-implant bone healing in an osteoporosis model, and to assess their combined effects on these processes. Thirteen-week-old ovariectomized rats (n = 44) were divided into three groups: PTH, alendronate, and saline. After 3 weeks of drug administration, titanium implants were inserted into the tibiae. Each group was subdivided into two groups: with or without LMHF loading via whole-body vibration (50 Hz at 0.5 g, 15 min per day, 5 days per week). Rats were killed 4 weeks following implantation. Removal torque test, micro-CT analyses (relative gray (RG) value, water = 0, and implant = 100), and histomorphometric analyses (bone-to-implant contact (BIC) and peri-implant bone formation (bone volume/tissue volume (BV/TV))) were performed. Removal torque values and BIC were significantly differed by loading and drug administration (ANOVA). Post hoc analysis showed that PTH-treated groups were significantly higher than the other drug-treated groups. BV/TV was significantly enhanced by PTH administration. In cortical bone, RG values were significantly increased by loading. In trabecular bone, however, RG values were significantly increased by PTH administration. These findings suggest that LMHF loading and PTH can act locally and additively on the bone healing process, improving the condition of implant osseointegration.

Whole-body vibration and administration of a hormone used to treat osteoporosis can enhance bone healing at the site of a titanium implant. Toru Ogawa of Tohoku University Graduate School of Dentistry in Sendai, Japan, and colleagues gave anti-osteoporosis medications, either parathyroid hormone or the bisphosphonate drug alendronate, to female rat models of osteoporosis. After three weeks of drug administration or a saline control, the researchers inserted titanium implants into the rats’ leg bones. Half the rats were then exposed to whole-body vibration, which applies low-magnitude, high-frequency mechanical forces. A multitude of tests showed that parathyroid hormone improved bone healing at the implant more than alendronate or saline did. The vibrational stimulus further increased the healing. The findings suggest that these treatments could aid in oral bone healing for patients receiving dental implants.

Bone remodeling and mechanobiology around implants: Insights from small animal imaging

Anchorage of orthopedic implants depends on the interfacial bonding between the implant and the host bone as well as on the mass and microstructure of peri-implant bone, with all these factors being continuously regulated by the biological process of bone (re)modeling. In osteoporotic bone, implant integration may be jeopardized not only by lower peri-implant bone quality but also by reduced intrinsic regeneration ability. The first aim of this review is to provide a critical overview of the influence of osteoporosis on bone regeneration post-implantation. Mechanical stimulation can trigger bone formation and inhibit bone resorption; thus, judicious administration of mechanical loading can be used as an effective non-pharmacological treatment to enhance implant anchorage. Our second aim is to report recent achievements on the application of external mechanical stimulation to improve the quantity of peri-implant bone. The review focuses on peri-implant bone changes in osteoporotic conditions and following mechanical loading, prevalently using small animals and in vivo monitoring approaches. We intend to demonstrate the necessity to reveal new biological information on peri-implant bone mechanobiology to better target implant anchorage and fracture fixation in osteoporotic conditions. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:584-593, 2018.

Lithium chloride enhances bone regeneration and implant osseointegration in osteoporotic conditions

Osteoporotic patients have a high risk of dental and orthopedic implant failure. Lithium chloride (LiCl) has been reported to enhance bone formation. However, the role of LiCl in the success rate of dental and orthopedic implants in osteoporotic conditions is still unknown. We investigated whether LiCl enhances implant osseointegration, implant fixation, and bone formation in osteoporotic conditions. Sprague-Dawley female rats (n = 18) were ovariectomized (OVX) to induce osteoporosis, and another nine rats underwent sham surgery. Three months after surgery, titanium implants were implanted in the tibia of the OVX and sham group rats. After implantation, the OVX rats were gavaged with 150 mg/kg/2 days of LiCl (OVX + LiCl group) or saline (OVX group), and sham group rats were gavaged with saline for 3 months. Implant osseointegration and bone formation were analyzed using histology, biomechanical testing, and micro computed tomography (micro-CT). More bone loss was observed in the OVX group compared to the control, and LiCl treatment enhanced bone formation and implant fixation in osteoporotic rats. In the OVX group, bone-implant contact (BIC) was decreased by 81.2 % compared to the sham group. Interestingly, the OVX + LiCl group showed 4.4-fold higher BIC compared to the OVX group. Micro-CT data of tibia from the OVX + LiCl group showed higher bone volume, trabecular thickness, trabecular number, and osseointegration compared to the OVX group. Maximum push-out force and implant-bone interface shear strength were 2.9-fold stronger in the OVX + LiCl group compared to the OVX group. In conclusion, LiCl enhanced implant osseointegration, implant fixation, and bone formation in osteoporotic conditions, suggesting LiCl as a promising therapeutic agent to prevent implant failure and bone loss in osteoporotic conditions.

Osseointegration of Coarse and Fine Textured Implants Manufactured by Electron Beam Melting and Direct Metal Laser Sintering

Osseointegrated implants transfer loads from native bone to a synthetic joint and can also function transdermally to provide a stable connection between the skeleton and the prostheses, eliminating many problems associated with socket prostheses. Additive manufacturing provides a cost-effective means to create patient-specific implants and allows for customized textures for integration with bone and other tissues. Our objective was to compare the osseointegration strength of two primary additive manufacturing methods of producing textured implants: electron beam melting (EBM) (mean Ra = 23 μm) and direct metal laser sintering (DMLS) (mean Ra = 10 μm). Due to spatial resolution, DMLS can produce surfaces with a roughness comparable to EBM. Two cohorts of Sprague-Dawley rats received bilateral, titanium implants in their distal femurs and were followed for 4 weeks. The first-cohort animals received EBM implants transcortically in one femur and a DMLS implant in the contralateral femur. The second cohort received DMLS implants (either fine textured or coarse textured to mimic EBM) in the intramedullary canal of each femur. Osseointegration was evaluated through mechanical testing and micro-computed tomography (bone volume fraction [BV/TV] and bone-implant contact [BIC]). The fixation strength of coarse textured implants provided superior interlocking relative to fine textured implants without affecting BV/TV or BIC in both cohorts. Coarse EBM implants in a transcortical model demonstrated an 85% increase in removal torque relative to the fine DMLS textured implants. The thrust load in the intramedullary model saw a 35% increase from fine to coarse DMLS implants.

The effect of local application of low-magnitude high-frequency vibration on the bone healing of rabbit calvarial defects-a pilot study

Background

The objective of this pilot study was to evaluate the effect of local application of low-magnitude high-frequency vibration (LMHFV) on the bone healing of rabbit calvarial defects that were augmented with different grafting materials and membranes.

Methods

Four calvarial defects were created in each of two New Zealand rabbits and filled with the following materials: biphasic calcium phosphate (BCP), deproteinized bovine bone mineral covered with a non-cross-linked collagen membrane (BO/BG), biphasic calcium phosphate covered with a strontium hydroxyapatite-containing collagen membrane (BCP/SR), and non-cross-linked collagen membrane (BG). Four defects in one rabbit served as a control, while the other was additionally subjected to the local LMHFV protocol of 40 Hz, 16 min per day. The rabbits were sacrificed 1 week after surgery. Histomorphometric analysis was performed to determine the percentages of different tissue compartments.

Results

Compared to the control defects, the higher percentage of osteoid tissue was found in LMHFV BG defects (35.3 vs. 19.3%), followed by BCP/SR (17.3 vs. 2.0%) and BO/BG (9.3 vs. 1.0%). The fraction occupied by the residual grafting material varied from 40.3% in BO/BG to 22.3% in BCP/SR LMHFV defects. Two-way models revealed that material type was only significant for the osteoid (P= 0.045) and grafting material (P = 0.001) percentages, while the vibration did not provide any statistical significance for all histomorphometric outcomes (P > 0.05).

Conclusion

Local application of LMHFV did not appear to offer additional benefit in the initial healing phase of rabbit calvarial defects. Histomorphometric measurements after 1 week of healing demonstrated more pronounced signs of early bone formation in both rabbits that were related with material type and independent of LMHFV.

Low-magnitude, high-frequency vibration promotes the adhesion and the osteogenic differentiation of bone marrow-derived mesenchymal stem cells cultured on a hydroxyapatite-coated surface: The direct role of Wnt/β-catenin signaling pathway activation

The positive effect of low-magnitude, high‑frequency (LMHF) vibration on implant osseointegration has been demonstrated; however, the underlying cellular and molecular mechanisms remain unknown. The aim of this study was to explore the effect of LMHF vibration on the adhesion and the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) cultured on hydroxyapatite (HA)-coated surfaces in an in vitro model as well as to elucidate the molecular mechanism responsible for the effects of LMHF vibration on osteogenesis. LMHF vibration resulted in the increased expression of fibronectin, which was measured by immunostaining and RT-qPCR. Stimulation of BMSCs by LMHF vibration resulted in the rearrangement of the actin cytoskeleton with more prominent F-actin. Moreover, the expression of β1 integrin, vinculin and paxillin was notably increased following LMHF stimulation. Scanning electron microscope observations revealed that there were higher cell numbers and more extracellular matrix attached to the HA-coated surface in the LMHF group. Alkaline phosphatase activity as well as the expression of osteogenic-specific genes, namely Runx2, osterix, collagen I and osteocalcin, were significantly elevated in the LMHF group. In addition, the protein expression of Wnt10B, β-catenin, Runx2 and osterix was increased following exposure to LMHF vibration. Taken together, the findings of this study indicate that LMHF vibration promotes the adhesion and the osteogenic differentiation of BMSCs on HA-coated surfaces in vitro, and LMHF vibration may directly induce osteogenesis by activating the Wnt/β‑catenin signaling pathway. These data suggest that LMHF vibration enhances the osseointegration of bone to a HA-coated implant, and provide a scientific foundation for improving bone-implant osseointegration through the application of LMHF vibration.

Combination treatment with whole body vibration and a kidney-tonifying herbal Fufang prevent osteoporosis in ovariectomized rats

OBJECTIVE

To assess the ability of whole body vibration (WBV) with the kidney-tonifying herbal Fufang (Bushen Zhuanggu Granules, BZG) to prevent osteoporosis in ovariectomized rats.

METHODS

Fifty 6-month-old female Sprague Dawley rats were divided into five groups: sham-operated (SHAM), ovariectomized (OVX), OVX with WBV (OVX + WBV), OVX with BZG (OVX + BZG), OVX with both WBV and BZG (OVX + WBV + BZG). The SHAM group received normal saline. After 12 weeks of treatment, the rats were killed, their serum concentrations of osteopontin (OPN), receptor activator of nuclear factor kappa-B ligand RANKL and bone turnover markers assayed and bone mineral density (BMD), histomorphometry and bone strength evaluated.

RESULTS

Concentrations of OPN were significantly lower in the SHAM, OVX + WBV and OVX + WBV + BZG groups at 12 weeks, whereas concentrations of RANKL had decreased significantly in the SHAM, OVX + WBV, OVX + BZG and OVX + WBV + BZG groups. In the OVX + WBV, OVX + BZG and OVX + WBV + BZG groups the amount of bone turnover had been significantly antagonized. Compared with OVX group, BMD, % trabecular area (Tb.Ar), number of trabeculae (Tb.N) and assessed biomechanical variables were higher in OVX+WBV group, whereas and BMD, %Tb.Ar, Tb.N, maximal load and yield load were higher in the OVX + BZG group. All tested indices were significantly lower in the OVX + WBV and OVX + BZG groups than in the OVX + WBV + BZG group.

CONCLUSION

Either WBV or BZG alone prevents OVX-induced bone loss. However, BZG enhances the effect of WBV by further enhancing BMD, bone architecture and strength.

The effects of combined human parathyroid hormone (1-34) and simvastatin treatment on osseous integration of hydroxyapatite-coated titanium implants in the femur of ovariectomized rats

The effect of human parathyroid hormone 1-34 (PTH) and simvastatin (SIM) alone could promote bone healing in osteoporotic osseous integration of the implant, but there are no reports about the combined use of PTH and SIM for promotion of bone healing around implant in osteoporotic settings still limited. This study aims to investigate effects of PTH+SIM on osseous integration of the implant in OVX rats. Female Sprague-Dawley rats were used for this study. Twelve weeks after bilateral ovariectomy, all animals were randomly divided into four groups: group control; group SIM; group PTH and group PTH+SIM. Afterwards, all OVX rats received hydroxyapatite (HA)-coated titanium rods (external diameter and length are 1.5mm and 20mm) in the femoral medullary canal. Subsequently, the animals from group SIM, group PTH and group PTH+SIM received human parathyroid hormone 1-34 (60μg/kg, three times a week), SIM (5mg/kg daily), or both for 12 weeks. Implants were inserted bilaterally in all animals until death at 12 weeks. The bilateral femurs of rats were harvested for evaluation. All groups increased new bone formation around the surface of titanium rods and push-out force; group PTH+SIM showed the strongest effects on new bone formation and biomechanical strength. Additionally, these are significant difference observed in bone formation and push-out force between groups SIM and PTH. This finding suggests that intermittent administration of PTH or SIM alone has an effect to increase new bone formation on the surface of HA-coated implants in the osteoporotic condition, and the additive effects of combination PTH and SIM on osseous integration of the implant in OVX rats.

Whole body vibration improves osseointegration by up-regulating osteoblastic activity but down-regulating osteoblast-mediated osteoclastogenesis via ERK1/2 pathway

Due to the reduction in bone mass and deterioration in bone microarchitecture, osteoporosis is an important risk factor for impairing implant osseointegration. Recently, low-magnitude, high-frequency (LMHF) vibration (LM: <1×g; HF: 20-90Hz) has been shown to exhibit anabolic, but anti-resorptive effects on skeletal homeostasis. Therefore, we hypothesized that LMHF loading, in terms of whole body vibration (WBV), may improve implant fixation under osteoporotic status. In the in vivo study, WBV treatment (magnitude: 0.3g, frequency: 40Hz, time: 30min/12h, 5days/week) was applied after hydroxyapatite-coated titanium implants were inserted in the bilateral tibiae of ovariectomized rats. The bone mass and the osteospecific gene expressions were measured at 12weeks post implantation. In the in vitro study, the cellular and molecular mechanisms underlying osteoblastic and osteoclastic activities were fully investigated using various experimental assays. Micro-CT examination showed that WBV could enhance osseointegration by improving microstructure parameters surrounding implants. WBV-regulated gene levels in favor of bone formation over resorption may be the reason for the favorable adaptive bone remolding on bone-implant surface. The in vitro study showed that vibration (magnitude: 0.3g, frequency: 40Hz, time: 30min/12h) up-regulated osteoblast differentiation, matrix synthesis and mineralization. However, mechanically regulated osteoclastic activity was mainly through the effect on osteoblastic cells producing osteoclastogenesis-associated key soluble factors, including RANKL and M-CSF. Osteoblasts were therefore the direct target cells during the mechanotransduction process. The ERK1/2 pathway was demonstrated to play an essential role in vibration-induced enhancement of bone formation and decreased bone resorption. Our data suggests that WBV was a helpful non-pharmacological intervention for improving osseointegration under osteoporosis.

Single and combined effect of high-frequency loading and bisphosphonate treatment on the bone micro-architecture of ovariectomized rats

Mechanical loading at high frequency affects bone. Whether this also applies to osteoporotic bone, combined or not with bisphosphonate therapy, was investigated in this animal study through imaging. An anabolic effect of high-frequency loading on osteoporotic bone, however non-synergistic with bisphosphonates, was found, thereby revealing its potential for treatment of osteoporosis.

INTRODUCTION

In an effort to elucidate the effect of high-frequency (HF) loading on bone and to optimize its potential for treatment osteoporosis, this study aimed to investigate the effect of HF loading via whole body vibration (WBV), alone or in association with bisphosphonate treatment (alendronate--ALN), on the micro-architecture of ovariectomy (OVX)-induced compromised bone.

METHODS

Eighty-four female Wistar rats were ovariectomized (OVX) or sham-operated (shOVX). OVX animals were treated either with ALN (3 days/week at a dose of 2 mg/kg) or with saline solution. Each group (shOVX, OVX, ALN) was further divided into subgroups relative to the loading status (sham-WBV versus WBV) and the duration of experimental period (4 days versus 14 days). (Sham)WBV loading was applied for 10 min/day using 10 consecutive steps of HF loading (130, 135, 140, 145, 150, 130, 135, 140, 145, 150 Hz). Tibial bone structural responses to WBV and/or ALN treatment were analyzed using ex vivo micro-computed tomography.

RESULTS

The animal's hormonal status displayed a major impact on the trabecular and cortical bone structural parameters. Furthermore, mechanical treatment with HF WBV increased the cortical thickness and reduced the medullar area in OVX rats. However, OVX trabecular bone was not affected by HF stimuli. Finally, ALN prevented OVX-associated bone loss, but the association of ALN with WBV did not lead to a synergistic bone response in OVX bone.

CONCLUSIONS

HF WBV mechanical stimulation displayed an anabolic effect on osteoporotic cortical bone, confirming its therapeutic properties for enhancing compromised bone. Additionally, its association with bisphosphonates' administration did not produce any additive effect on the bone micro-architecture in the present study.

High-frequency loading positively impacts titanium implant osseointegration in impaired bone

High-frequency loading via whole body vibration promotes bone formation and increases bone strength. Whether this translates to positive titanium implant osseointegration in osteoporotic bone was explored in this animal study. An anabolic effect of not only bisphosphonate treatment but also high-frequency loading on implant osseointegration in osteoporotic bone was observed.

INTRODUCTION

The present study investigated the impact of high-frequency (HF) loading, applied via whole body vibration (WBV), on titanium implant osseointegration in healthy versus ovariectomy-induced compromised versus pharmacologically treated compromised bone.

METHODS

A custom-made Ti implant was inserted into the metaphyseal tibia of 59 rats and left to heal for either 4 or 14 days. Rats were divided into six groups according to their hormonal and mechanical status. WBV, consisting of 10 consecutive frequency steps at an acceleration of 0.3 g, was applied daily for either 4 or 14 days. Tissue samples were processed for quantitative histology at the tibial cortical and medullar level. Data were analyzed by three-way ANOVA and by post hoc pairwise comparisons.

RESULTS

The bone healing response at the interface and surrounding titanium implants was negatively influenced by osteoporotic bone conditions, mainly at the trabecular bone level. Furthermore, the administration of bisphosphonates for preventing the ovariectomy-induced impaired peri-implant response was successful. Finally, the effect of HF WBV loading on the peri-implant bone healing was dependent on the bone condition and was anabolic solely in untreated osteoporotic trabecular bone when applied for an extended period of time.

CONCLUSIONS

The bone healing response to implant installation is compromised in osteoporotic bone conditions, in particular at the trabecular bone compartment. Meanwhile, not only pharmacological treatment but also mechanical loading via HF WBV can exert a positive effect on implant osseointegration in this specific bone micro-environment. The peri-implant cortical bone, however, seems to be less sensitive to HF WBV loading influences.

Stimulation of titanium implant osseointegration through high-frequency vibration loading is enhanced when applied at high acceleration

Low-magnitude high-frequency loading, applied by means of whole body vibration (WBV), affects the bone. Deconstructing a WBV loading stimulus into its constituent elements and investigating the effects of frequency and acceleration individually on bone tissue kinetics around titanium implants were aimed for in this study. A titanium implant was inserted in the tibia of 120 rats. The rats were divided into 1 control group (no loading) and 5 test groups with low (L), medium (M) or high (H) frequency ranges and accelerations [12-30 Hz at 0.3×g (F(L)A(H)); 70-90 Hz at 0.075×g (F(M)A(M)); 70-90 Hz at 0.3×g (F(M)A(H)); 130-150 Hz at 0.043×g (F(H)A(L)); 130-150 Hz at 0.3×g (F H A H)]. WBV was applied for 1 or 4 weeks. Implant osseointegration was evaluated by quantitative histology (bone-to-implant contact (BIC) and peri-implant bone formation (BV/TV)). A 2-way ANOVA (duration of experimental period; loading mode) with α = 0.05 was performed. BIC significantly increased over time and under load (p < 0.0001). The highest BICs were found for loading regimes at high acceleration with medium or high frequency (F(M)A(H) and F(H)A(H)), and significantly differing from F(L)A(H) and F(M)A(M) (p < 0.02 and p < 0.005 respectively). BV/TV significantly decreased over time (p < 0.0001). Loading led to a site-specific BV/TV increase (p < 0.001). The highest BV/TV responses were found for F(M)A(H) and F(H)A(H), significantly differing from F(M)A(M) (p < 0.005). The findings reveal the potential of high-frequency vibration loading to accelerate and enhance implant osseointegration, in particular when applied at high acceleration. Such mechanical signals hold great, though untapped, potential to be used as non-pharmacologic treatment for improving implant osseointegration in compromised bone.

Low-magnitude high-frequency loading, by whole-body vibration, accelerates early implant osseointegration in ovariectomized rats

Osteoporosis deteriorates jaw bone quality and may compromise early implant osseointegration and early implant loading. The influence of low-magnitude, high-frequency (LMHF) vibration on peri-implant bone healing and implant integration in osteoporotic bones remains poorly understood. LMHF loading via whole-body vibration (WBV) for 8 weeks has previously been demonstrated to significantly enhance bone-to-implant contact, peri-implant bone fraction and implant mechanical properties in osteoporotic rats. In the present study, LMHF loading by WBV was performed in osteoporotic rats, with a loading duration of 4 weeks during the early stages of bone healing. The results indicated that 4-week LMHF loading by WBV partly reversed the negative effects of osteoporosis and accelerated early peri-implant osseointegration in ovariectomized rats.

Direct Radial LMHF Microvibration Induced Bone Formation and Promoted Implant Osseointegration

BACKGROUND

Mechanical loading is known to play an important role in bone remodeling.

PURPOSE

This study aimed to evaluate the effect of direct low-magnitude high-frequency (LMHF) microvibration on dental implant bone formation and osseointegration.

MATERIALS AND METHODS

Titanium implants were installed in rabbit tibiae. The implants in the left legs were loaded with mechanical vibration (15 μm) at 10, 20, 30, and 40 Hz (10, 20, 30, and 40 Hz groups, respectively) for 30 minutes every day. The implants on the right legs were used as a sham control and did not receive a vibration load.

RESULTS

After 20 days, the 10, 20, and 30 Hz groups showed significantly greater newly formed bone volume, density, ratio of the bone surface area to the trabecular bone surface area, and ratio of the bone surface area in direct contact with osteoclasts versus the total bone surface area in the region of interest compared with the sham control group, especially the 20 Hz group. However, the 40 Hz group did not.

CONCLUSIONS

In conclusion, the application of direct LMHF (10, 20, or 30 Hz) vibration on the implants promoted bone formation and osseointegration, especially at 20 Hz; however, the use of 40 Hz did not result in any significant improvement.

Comparable effects of alendronate and strontium ranelate on femur in ovariectomized rats

This study compared the effects of alendronate (ALN) and strontium ranelate (SR) on bone mineral density (BMD), bone histomorphometry, and biomechanics in ovariectomized (OVX) rats. We randomly assigned 48 3-month-old female Sprague-Dawley rats to four groups: sham, OVX, ALN, and SR. Rats in the OVX, ALN, and SR groups received bilateral OVX. Rats in the ALN and SR groups were orally administrated ALN (7 mg/kg/week) and SR (500 mg/kg/day). Rats in the sham and OVX groups were treated with saline. All treatments continued for 12 weeks. Femoral BMD examination, distal femoral bone histomorphometry analysis, and biomechanical tests at the femoral diaphysis and metaphysis were performed to evaluate the effects of treatments in OVX rats. Results showed that both ALN and SR significantly increased femoral BMD (total femur, diaphyseal BMD, and distal metaphyseal BMD), distal femoral bone histomorphometric parameters (BV/TV, Tb.N, and Tb.Th), and femoral biomechanical parameters (maximum load, failure load, stiffness) compared with the OVX group (P < 0.05). No differences were found between ALN and SR in increasing femoral BMD, distal femoral bone histomorphometric parameters (BV/TV, Tb.N, and Tb.Th), and femoral diaphysis biomechanical parameters (maximum load, failure load, stiffness) (P > 0.05). The SR group was inferior to the ALN group in femoral metaphysis biomechanical parameters (P < 0.05). In conclusion, ALN (7 mg/kg/week) and SR (500 mg/kg/day) have similar effects by increasing BMD, distal femoral bone histomorphometric parameters, and femoral metaphysis biomechanical properties. Although ALN has greater effects than SR on distal femoral metaphysis biomechanical properties, in general, ALN and SR have comparable effects on the femur in OVX rats.

Zoledronic acid enhances bone-implant osseointegration more than alendronate and strontium ranelate in ovariectomized rats

This study was designed to compare the effects of alendronate (ALN), strontium ranelate (SR), and zoledronic acid (ZOL) on bone-implant osseointegration in ovariectomized rats. Histological examination and biomechanical tests show that ZOL, ALN, and SR enhance bone-implant osseointegration; ALN and SR have similar effects, while ZOL enhances bone-implant osseointegration more than ALN and SR INTRODUCTION: This study aims to compare the effects of ALN, SR, and ZOL on bone-implant osseointegration in ovariectomized rats.

METHODS

Sixty female Sprague-Dawley rats were included in this study. Of them, 48 rats were ovariectomized (OVX) and assigned to four groups: OVX (OVX + Veh), ALN (OVX + ALN), SR (OVX + SR), and ZOL (OVX + ZOL). And another 12 rats were sham-operated as a control group (Sham). Four weeks after ovariectomy, HA-coated titanium implants were inserted into the tibias bilaterally in all rats. Then the rats in groups ALN, SR, and ZOL were systemically administrated with alendronate (7 mg/kg/week, orally), strontium ranelate (500 mg/kg/day, orally), or a single injection of zoledronic acid (0.1 mg/kg, iv), respectively. Twelve weeks after implantation, all rats were sacrificed to get the femurs and tibias. Histological examination and biomechanical tests were used to evaluate bone-implant osseointegration in all groups.

RESULTS

ALN, SR, and ZOL significantly increased distal femoral BMD when compared with group OVX; ZOL increased BMD significantly more than ALN and SR (P < 0.05). Significant increase of bone-to-implant contact and peri-implant bone fraction were observed in groups ALN, SR, and ZOL when compared with group OVX (P < 0.05). Groups ALN and SR were inferior to groups ZOL and Sham (P < 0.05) in bone-to-implant contact and peri-implant bone fraction. Similar results were found in biomechanical testing (max pushout force).

CONCLUSIONS

In rats losing bone rapidly after ovariectomy, systemic administration of ZOL, ALN, and SR causes better bone-implant osseointegration when compared to OVX; ALN and SR have similar positive effects on osseointegration, while ZOL, that was given in a dose with more positive BMD effect than that of ALN or SR, causes better osseointegration than either ALN or SR.