Structure and mechanical function of the inter-lamellar matrix of the annulus fibrosus in the disc

Cellular behavior and extracellular matrix turnover in bovine annulus fibrosus cells under hydrostatic pressure and deviatoric strain

Intervertebral disc herniation is a common spinal disorder that is often treated with discectomy when conservative measures fail. To devise therapeutic strategies for tears in the annulus fibrosus (AF), the regenerative capability of AF cells under spinal loading needs to be addressed. We hypothesized that the compressive loading associated with deformation in AF cells reduces synthetic and degradative activities in extracellular matrix and cell proliferation. We evaluated expression of key matrix molecules and cell proliferation by RT-PCR and immunohistochemistry by inner and outer bovine AF cells incubated under hydrostatic pressure (HP), arc-bending strain (Strain), and combined HP and Strain (HP/Strain) mimicking spinal loading. Inner AF cells showed significantly increased levels of aggrecan core protein, chondroitin sulfate N-acetylgalactosaminyltransferase-1, and tissue inhibitor of metalloproteinases-2 by 6 days under HP (p < 0.05), with a tendency toward increased matrix metalloproteinase-13. Outer AF cells demonstrated a significant decline in collagen type-2 under Strain and HP/Strain (p < 0.05) and a tendency toward suppression of collagen type-1 and elastin expression compared to HP and unloaded control. On the other hand, proliferating cell nucleus antigen increased significantly under Strain and HP/Strain in inner AF and declined under unloaded and HP in outer AF (p < 0.05). Immunohistology findings supported reductions in gene expressions of matrix molecules. Thus, changes in HP/Strain in AF appear to diminish synthetic and degradative activities while increasing cell proliferation. To promote regeneration, continuous overloading should be avoided, as it converts the synthetic activity to a state in which tissue repair is limited.

In Vitro Models of Cell Senescence: A Systematic Review on Musculoskeletal Tissues and Cells

Ageing is an irreversible and inevitable biological process and a significant risk factor for the development of various diseases, also affecting the musculoskeletal system, resulting from the accumulation of cell senescence. The aim of this systematic review was to collect the in vitro studies conducted over the past decade in which cell senescence was induced through various methods, with the purpose of evaluating the molecular and cellular mechanisms underlying senescence and to identify treatments capable of delaying senescence. Through three electronic databases, 22 in vitro studies were identified and included in this systematic review. Disc, cartilage, or muscle cells or tissues and mesenchymal stem cells were employed to set-up in vitro models of senescence. The most common technique used to induce cell senescence was the addition to the culture medium of tumor necrosis factor (TNF)α and/or interleukin (IL)1β, followed by irradiation, compression, hydrogen peroxide (H2O2), microgravity, in vitro expansion up to passage 10, and cells harvested from damaged areas of explants. Few studies evaluated possible treatments to anti-senescence effects. The included studies used in vitro models of senescence in musculoskeletal tissues, providing powerful tools to evaluate age-related changes and pathologies, also contributing to the development of new therapeutic approaches.

Emerging tissue engineering strategies for annulus fibrosus therapy

Low back pain is a major public health concern experienced by 80% of the world's population during their lifetime, which is closely associated with intervertebral disc (IVD) herniation. IVD herniation manifests as the nucleus pulposus (NP) protruding beyond the boundaries of the intervertebral disc due to disruption of the annulus fibrosus (AF). With a deepening understanding of the importance of the AF structure in the pathogenesis of intervertebral disc degeneration, numerous advanced therapeutic strategies for AF based on tissue engineering, cellular regeneration, and gene therapy have emerged. However, there is still no consensus concerning the optimal approach for AF regeneration. In this review, we summarized strategies in the field of AF repair and highlighted ideal cell types and pro-differentiation targeting approaches for AF repair, and discussed the prospects and difficulties of implant systems combining cells and biomaterials to guide future research directions. STATEMENT OF SIGNIFICANCE: Low back pain is a major public health concern experienced by 80% of the world's population during their lifetime, which is closely associated with intervertebral disc (IVD) herniation. However, there is still no consensus concerning the optimal approach for annulus fibrosus (AF) regeneration. In this review, we summarized strategies in the field of AF repair and highlighted ideal cell types and pro-differentiation targeting approaches for AF repair, and discussed the prospects and difficulties of implant systems combining cells and biomaterials to guide future research directions.

A Microstructure-Based Mechanistic Approach to Detect Degeneration Effects on Potential Damage Zones and Morphology of Young and Old Human Intervertebral Discs

There is an increasing demand to develop predictive medicine through the creation of predictive models and digital twins of the different body organs. To obtain accurate predictions, real local microstructure, morphology changes and their accompanying physiological degenerative effects must be taken into account. In this article, we present a numerical model to estimate the long-term aging effect on the human intervertebral disc response by means of a microstructure-based mechanistic approach. It allows to monitor in-silico the variations in disc geometry and local mechanical fields induced by age-dependent long-term microstructure changes. Both lamellar and interlamellar zones of the disc annulus fibrosus are constitutively represented by considering the main underlying microstructure features in terms of proteoglycans network viscoelasticity, collagen network elasticity (along with content and orientation) and chemical-induced fluid transfer. With age, a noticeable increase in shear strain is especially observed in the posterior and lateral posterior regions of the annulus which is in correlation with the high vulnerability of elderly people to back problems and posterior disc hernia. Important insights about the relation between age-dependent microstructure features, disc mechanics and disc damage are revealed using the present approach. These numerical observations are hardly obtainable using current experimental technologies which makes our numerical tool useful for patient-specific long-term predictions.

Biomechanical effect of age-related structural changes on cervical intervertebral disc: A finite element study

Previous literature has investigated the biomechanical response of healthy and degenerative discs, but the biomechanical response of suboptimal healthy intervertebral discs received less attention. The purpose was to compare the biomechanical responses and risk of herniation of young healthy, suboptimal healthy, and degenerative intervertebral discs. A cervical spine model was established and validated using the finite element method. Suboptimal healthy, mildly, moderately, and severely degenerative disc models were developed. Disc height deformation, range of motion, intradiscal pressure, and von Mises stress in annulus fibrosus were analyzed by applying a moment of 4 Nm in flexion, extension, lateral bending, and axial rotation with 100 N compressive loads. Disc height deformation in young healthy, suboptimal healthy, mildly, moderately, and severely degenerative discs was 40%, 37%, 21%, 12%, and 8%, respectively. The decreasing order of the range of motion was young healthy spine > suboptimal healthy spine > mildly degenerative spine > moderately degenerative spine > severely degenerative spine. The mean stress of annulus ground substance in the suboptimal healthy disc was higher than in the young healthy disc. The mean stress of inter-lamellar matrix and annulus ground substance in moderately and severely degenerative discs was higher than in other discs. Age-related structural changes and degenerative changes increased the stiffness and reduced the elastic deformation of intervertebral discs. Decreased range of motion due to the effects of aging or degeneration on the intervertebral disc, may cause compensation of adjacent segments and lead to progressive degeneration of multiple segments. The effect of aging on the intervertebral disc increased the risk of annulus fibrosus damage from the biomechanical point of view. Moderately and severely degenerative discs may have a higher risk of herniation due to the higher risk of damage and layers separation of annulus fibrosus caused by increased stress in the annulus ground substance and inter-lamellar matrix.

Exosomes and exosomal miRNAs: A new therapy for intervertebral disc degeneration

Low back pain has been found as a major cause of global disease burden and disability. Intervertebral disc degeneration is recognized as the vital factor causing low back pain. Intervertebral disc degeneration has a complex mechanism and cannot be avoided. Traditional strategies for the treatment of intervertebral disc degeneration cannot meet the needs of intervertebral disc regeneration, so novel treatment methods are urgently required. Exosomes refer to extracellular vesicles that can be released by most cells, and play major roles in intercellular material transport and information transmission. MicroRNAs have been identified as essential components in exosomes, which can be selectively ingested by exosomes and delivered to receptor cells for the regulation of the physiological activities and functions of receptor cells. Existing studies have progressively focused on the role of exosomes and exosomal microRNAs in the treatment of intervertebral disc degeneration. The focus on this paper is placed on the changes of microenvironment during intervertebral disc degeneration and the biogenesis and mechanism of action of exosomes and exosomal microRNAs. The research results and deficiencies of exosomes and exosomal microRNAs in the regulation of apoptosis, extracellular matrix homeostasis, inflammatory response, oxidative stress, and angiogenesis in intervertebral disc degeneration are primarily investigated. The aim of this paper is to identify the latest research results, potential applications and challenges of this emerging treatment strategy.

Elastic Fibers in the Intervertebral Disc: From Form to Function and toward Regeneration

Despite extensive efforts over the past 40 years, there is still a significant gap in knowledge of the characteristics of elastic fibers in the intervertebral disc (IVD). More studies are required to clarify the potential contribution of elastic fibers to the IVD (healthy and diseased) function and recommend critical areas for future investigations. On the other hand, current IVD in-vitro models are not true reflections of the complex biological IVD tissue and the role of elastic fibers has often been ignored in developing relevant tissue-engineered scaffolds and realistic computational models. This has affected the progress of IVD studies (tissue engineering solutions, biomechanics, fundamental biology) and translation into clinical practice. Motivated by the current gap, the current review paper presents a comprehensive study (from the early 1980s to 2022) that explores the current understanding of structural (multi-scale hierarchy), biological (development and aging, elastin content, and cell-fiber interaction), and biomechanical properties of the IVD elastic fibers, and provides new insights into future investigations in this domain.

Degenerative Lumbar Spine Disease: Imaging and Biomechanics

Chronic low back pain (CLBP) is one of the most common diagnoses encountered when considering years lived with disability. The degenerative changes of the lumbar spine include a wide spectrum of morphological modifications visible on imaging, some of them often asymptomatic or not consistent with symptoms. Phenotyping by considering both clinical and imaging biomarkers can improve the management of CLBP. Depending on the clinical presentation, imaging helps determine the most likely anatomical nociceptive source, thereby enhancing the therapeutic approach by targeting a specific lesion. Three pathologic conditions with an approach based on our experience can be described: (1) pure painful syndromes related to single nociceptive sources (e.g., disk pain, active disk pain, and facet joint osteoarthritis pain), (2) multifactorial painful syndromes, representing a combination of several nociceptive sources (such as lumbar spinal stenosis pain, foraminal stenosis pain, and instability pain), and (3) nonspecific CLBP, often explained by postural (muscular) syndromes.

Delamination of the Annulus Fibrosus of the Intervertebral Disc: Using a Bovine Tail Model to Examine Effect of Separation Rate

The intervertebral disc (IVD) is a complex structure, and recent evidence suggests that separations or delamination between layers of the annulus may contribute to degeneration development, a common cause of low back pain The purpose of the present experiment was to quantify the mechanical response of the layer-adjoining interlamellar matrix at different rates of separation. Understanding the rate-dependency of the interlamellar matrix, or the adhesion between adjacent layers of the disc, is important as the spine experiences various loading velocities during activities of daily living. Twelve discs were dissected from four bovine tails (three extracts per tail). Two multi-layered annulus samples were collected from each IVD (total = 24, mean bond width = 3.82 ± 0.96 mm) and randomly assigned to a 180° peel test at one of three delamination rates; 0.05 mm/s, 0.5 mm/s, or 5 mm/s. Annulus extracts were found to have similar maximal adhesion strengths (p = 0.39) and stiffness (p = 0.97) across all rate conditions. However, a significant difference in lamellar adhesion strength variability was observed between the 5 mm/s condition (0.96 N/mm ± 0.31) when compared to the 0.5 mm/s (0.50 N/mm ± 0.19) and 0.05 mm/s (0.37 N/mm ± 0.13) conditions (p < 0.05). Increased variability may be indicative of non-uniform strength due to inconsistent adhesion throughout the interlamellar matrix, which is exacerbated by increased rates of loading. The observed non-uniform strength could possibly lead to a scenario more favourable to the development of microtrauma, and eventual delamination.

Importance of Matrix Cues on Intervertebral Disc Development, Degeneration, and Regeneration

Back pain is one of the leading causes of disability worldwide and is frequently caused by degeneration of the intervertebral discs. The discs’ development, homeostasis, and degeneration are driven by a complex series of biochemical and physical extracellular matrix cues produced by and transmitted to native cells. Thus, understanding the roles of different cues is essential for designing effective cellular and regenerative therapies. Omics technologies have helped identify many new matrix cues; however, comparatively few matrix molecules have thus far been incorporated into tissue engineered models. These include collagen type I and type II, laminins, glycosaminoglycans, and their biomimetic analogues. Modern biofabrication techniques, such as 3D bioprinting, are also enabling the spatial patterning of matrix molecules and growth factors to direct regional effects. These techniques should now be applied to biochemically, physically, and structurally relevant disc models incorporating disc and stem cells to investigate the drivers of healthy cell phenotype and differentiation. Such research will inform the development of efficacious regenerative therapies and improved clinical outcomes.

Diurnal Variation in Hydration of the Cervical Intervertebral Disc Assessed Using T2 Mapping of Magnetic Resonance Imaging

Objective

The study aimed to investigate the diurnal variation in cervical disc hydration and its relationship with cervical degeneration.

Materials and Methods

C3–C7 discs of 86 prospectively enrolled participants (37 males, 49 females; mean age ± standard deviation, 23.5 ± 2.5 years) were assessed using T2 mapping in the morning and evening. All discs were stratified by Miyazaki grade or C2–C7 Cobb angle and T2 values (T2). The degree of diurnal T2 variation (T2-DDV), defined as (morning T2 – evening T2)/morning T2 × 100%, was measured for the entire disc, annulus fibrosus (AF), nucleus pulposus (NP), and endplate zones.

Results

T2 of the entire disc decreased significantly after the daytime load (p < 0.001), with a T2-DDV of 13.3% for all discs and 16.0%, 12.2%, and 13.0% for healthy (grade I), mild degenerative (grade II), and advanced degenerative (grade III/IV) discs, respectively. T2 of regional NPs and AFs decreased significantly from morning to evening (p ≤ 0.049) except in the healthy anterior inner AF (p = 0.092). Compared with healthy discs, mild degenerative discs displayed lower T2 and T2-DDV in regional NPs (p < 0.001). Advanced degenerative discs showed higher T2-DDV in the anterior inner AF compared with healthy discs (p = 0.050). Significant diurnal T2 changes in the endplate zones were observed only in healthy discs (p = 0.013). Cervical discs in the low Cobb angle group showed higher T2-DDV in the anterior AFs and anterior NP and lower T2-DDV in the posterior AF than those in the high Cobb angle group (p ≤ 0.041).

Conclusion

This study characterized the diurnal variation in hydration of the cervical discs as assessed using T2 mapping and revealed early chemo-mechanical coupling dysfunction in degenerating discs. Cervical sagittal alignment on MRI can affect the diurnal stress patterns of the cervical discs. T2 mapping is sensitive to disc biomechanical dysfunction and offers translational potential from biomechanical research to clinical application.

Detailed mechanical characterization of the transition zone: New insight into the integration between the annulus and nucleus of the intervertebral disc

The Nucleus Pulposus (NP) and Annulus Fibrous (AF) are two primary regions of the intervertebral disc (IVD). The interface between the AF and NP, where the gradual transition in structure and type of fibers are observed, is known as the Transition Zone (TZ). Recent structural studies have shown that the TZ contains organized fibers that appear to connect the NP to the AF. However, the mechanical characteristics of the TZ are yet to be explored. The current study aimed to investigate the mechanical properties of the TZ at the anterolateral (AL) and posterolateral (PL) regions in both radial and circumferential directions of loading using ovine IVDs (N = 28). Young's and toe moduli, maximum stress, failure strain, strain at maximum stress, and toughness were calculated mechanical parameters. The findings from this study revealed that the mechanical properties of the TZ, including young's modulus (p = 0.001), failure strain (p < 0.001), strain at maximum stress (p = 0.002), toughness (p = 0.027), and toe modulus (p = 0.005), were significantly lower for the PL compared to the AL region. Maximum stress was not significantly different between the PL and AL regions (p = 0.164). We found that maximum stress (p = 0.002), failure strain (p < 0.001), and toughness (p = 0.001) were significantly different in different loading directions. No significant differences for modulus (young's; p = 0.169 and toe; p = 0.352) and strain at maximum stress (p = 0.727) were found between the radial and circumferential loading directions. STATEMENT OF SIGNIFICANCE: To date there has not been a study that has investigated the mechanical characterization of the annulus (AF)-nucleus (NP) interface (transition zone; TZ) in the intervertebral disc (IVD), nor is it known whether the posterolateral (PL) and anterolateral (AL) regions of the TZ exhibit different mechanical properties. Accordingly, the TZ mechanical properties have been rarely used in the development of computational IVD models and relevant tissue-engineered scaffolds. The current research reported the mechanical properties of the TZ region and revealed that its mechanical properties were significantly lower for the PL compared to the AL region. These new findings enhance our knowledge about the nature of AF-NP integration and may help to develop more realistic tissue-engineered or computational IVD models.

Modeling multiaxial damage regional variation in human annulus fibrosus

In the present article, a fully three-dimensional human annulus fibrosus model is developed by considering the regional variation of the complex structural organization of collagen network at different scales to predict the regional anisotropic multiaxial damage of the intervertebral disc. The model parameters are identified using experimental data considering as elementary structural unit, the single annulus lamellae stretched till failure along the micro-sized collagen fibers. The multi-layered lamellar/inter-lamellar annulus model is constructed by considering the effective interactions between adjacent layers and the chemical-induced volumetric strain. The regional dependent model predictions are analyzed under various loading modes and compared to experimental data when available. The stretching along the circumferential and radial directions till failure serves to check the predictive capacities of the annulus model. Model results under simple shear, biaxial stretching and plane-strain compression are further presented and discussed. Finally, a full disc model is constructed using the regional annulus model and simulations are presented to assess the most likely failed areas under disc axial compression. STATEMENT OF SIGNIFICANCE: The damage in annulus soft tissues is a complex multiscale phenomenon due to a complex structural arrangement of collagen network at different scales of hierarchical organization. A fully three-dimensional constitutive representation that considers the regional variation of the structural complexity to estimate annulus multiaxial mechanics till failure has not yet been developed. Here, a model is developed to predict deformation-induced damage and failure of annulus under multiaxial loading histories considering as time-dependent physical process both chemical-induced volumetric effects and damage accumulation. After model identification using single lamellae extracted from different disc regions, the model predictability is verified for various multiaxial elementary loading modes representative of the spine movement. The heterogeneous mechanics of a full human disc model is finally presented.

Mechanical Stretch Induces Annulus Fibrosus Cell Senescence through Activation of the RhoA/ROCK Pathway

Background

Intervertebral disc is responsible for absorbing and transmitting mechanical compression. Under physiological conditions, the peripheral annulus fibrosus (AF) cells are subjected to different magnitudes of transverse mechanical stretch depending on the swelling of the central nucleus pulposus tissue. However, the biological behavior of AF cells under mechanical stretch is not well studied.

Objective

This study was performed to study the effects of mechanical tension on AF cell senescence and the potential signaling transduction pathway.

Methods

Rat AF cells were made to experience different magnitudes of mechanical stretch (2% elongation and 20% elongation for 4 hours every day at 1 Hz) in a 10-day experiment period. The inhibitor RKI-1447 of the Rho-associated coiled-coil–containing protein kinases (ROCK) was added along with culture medium to investigate its role. Cell proliferation, cell cycle, telomerase activity, and expression of senescence markers (p16 and p53) were analyzed.

Results

We found that 20% elongation significantly decreased cell proliferation, promoted G0/G1 cell cycle arrest, decreased telomerase activity, and upregulated mRNA/protein expression of p16 and p53. Moreover, the inhibitor RKI-1447 partly resisted effects of 20% elongation on these parameters of cell senescence.

Conclusion

High mechanical stretch obviously induces AF cell senescence through the RhoA/ROCK pathway. This study provides us a deeper understanding on the AF cell's behavior under mechanical stretch.

Angle-ply scaffold supports annulus fibrosus matrix expression and remodeling by mesenchymal stromal and annulus fibrosus cells

The angle-ply multilaminate structure of the annulus fibrosus is not reestablished following discectomy which leads to reherniation of the intervertebral disc (IVD). Biomimetic scaffolds developed to repair these defects should be evaluated for their ability to support tissue regeneration by endogenous and exogenous cells. Herein a collagen-based, angle-ply multilaminate patch designed to repair the outer annulus fibrosus was assessed for its ability to support mesenchymal stromal and annulus fibrosus cell viability, elongation, alignment, extracellular matrix gene expression, and scaffold remodeling. Results demonstrated that the cells remained viable, elongated, and aligned along the collagen fiber preferred direction of the scaffold, upregulated genes associated with annulus fibrosus matrix and produced collagen on the scaffold yielding biaxial mechanical properties that resembled native annulus fibrosus tissue. In conclusion, these scaffolds have demonstrated their potential to promote a living repair of defects in the annulus fibrosus and thus may be used to prevent recurrent IVD herniations.

Biochemical and immuno-histochemical localization of type IIA procollagen in annulus fibrosus of mature bovine intervertebral disc

For next generation tissue-engineered constructs and regenerative medicine to succeed clinically, the basic biology and extracellular matrix composition of tissues that these repair techniques seek to restore have to be fully determined. Using the latest reagents coupled with tried and tested methodologies, we continue to uncover previously undetected structural proteins in mature intervertebral disc. In this study we show that the “embryonic” type IIA procollagen isoform (containing a cysteine-rich amino propeptide) was biochemically detectable in the annulus fibrosus of both calf and mature steer caudal intervertebral discs, but not in the nucleus pulposus where the type IIB isoform was predominantly localized. Specifically, the triple-helical type IIA procollagen isoform immunolocalized in the outer margins of the inner annulus fibrosus. Triple helical processed type II collagen exclusively localized within the inter-lamellae regions and with type IIA procollagen in the intra-lamellae regions. Mass spectrometry of the α1(II) collagen chains from the region where type IIA procollagen localized showed high 3-hydroxylation of Proline-944, a post-translational modification that is correlated with thin collagen fibrils as in the nucleus pulposus. The findings implicate small diameter fibrils of type IIA procollagen in select regions of the annulus fibrosus where it likely contributes to the organization of collagen bundles and structural properties within the type I-type II collagen transition zone.

Multiaxial validation of a finite element model of the intervertebral disc with multigenerational fibers to establish residual strain

Finite element models of the intervertebral disc are used to address research questions that cannot be tested through typical experimentation. A disc model requires complex geometry and tissue properties to be accurately defined to mimic the physiological disc. The physiological disc possesses residual strain in the annulus fibrosus (AF) due to osmotic swelling and due to inherently pre-strained fibers. We developed a disc model with residual contributions due to swelling-only, and a multigeneration model with residual contributions due to both swelling and AF fiber pre-strain and validated it against organ-scale uniaxial, quasi-static and multiaxial, dynamic mechanical tests. In addition, we demonstrated the models' ability to mimic the opening angle observed following radial incision of bovine discs. Both models were validated against organ-scale experimental data. While the swelling only model responses were within the experimental 95% confidence interval, the multigeneration model offered outcomes closer to the experimental mean and had a bovine model opening angle within one SD of the experimental mean. The better outcomes for the multigeneration model, which allowed for the inclusion of inherently pre-strained fibers in AF, is likely due to its uniform fiber contribution throughout the AF. We conclude that the residual contribution of pre-strained fibers in the AF should be included to best simulate the physiological disc and its behaviors.

Modeling of human intervertebral disc annulus fibrosus with complex multi-fiber networks

Collagen fibers within the annulus fibrosus (AF) lamellae are unidirectionally aligned with alternating orientations between adjacent layers. AF constitutive models often combine two adjacent lamellae into a single equivalent layer containing two fiber networks with a crisscross pattern. Additionally, AF models overlook the inter-lamellar matrix (ILM) as well as elastic fiber networks in between lamellae. We developed a nonhomogenous micromechanical model as well as two coarser homogenous hyperelastic and microplane models of the human AF, and compared their performances against measurements (tissue level uniaxial and biaxial tests as well as whole disc experiments) and seven published hyperelastic models. The micromechanical model had a realistic non-homogenous distribution of collagen fiber networks within each lamella and elastic fiber network in the ILM. For small matrix linear moduli (<0.2 MPa), the ILM showed substantial anisotropy (>10%) due to the elastic fiber network. However, at moduli >0.2 MPa, the effects of the elastic fiber network on differences in stress-strain responses at different directions disappeared (<10%). Variations in sample geometry and boundary conditions (due to uncertainty) markedly affected stress-strain responses of the tissue in uniaxial and biaxial tests (up to 16 times). In tissue level tests, therefore, simulations should represent testing conditions (e.g., boundary conditions, specimen geometry, preloads) as closely as possible. Stress/strain fields estimated from the single equivalent layer approach (conventional method) yielded different results from those predicted by the anatomically more accurate apparoach (i.e., layerwise). In addition, in a disc under a compressive force (symmetric loading), asymmetric stress-strain distributions were computed when using a layerwise simulation. Although all developed and selected published AF models predicted gross compression-displacement responses of the whole disc within the range of measured data, some showed excessively stiff or compliant responses under tissue-level uniaxial/biaxial tests. This study emphasizes, when constructing and validating constitutive models of AF, the importance of the proper simulation of individual lamellae as distinct layers, and testing parameters (sample geometric dimensions/loading/boundary conditions).

Perlecan in Pericellular Mechanosensory Cell-Matrix Communication, Extracellular Matrix Stabilisation and Mechanoregulation of Load-Bearing Connective Tissues

In this study, we review mechanoregulatory roles for perlecan in load-bearing connective tissues. Perlecan facilitates the co-acervation of tropoelastin and assembly of elastic microfibrils in translamellar cross-bridges which, together with fibrillin and elastin stabilise the extracellular matrix of the intervertebral disc annulus fibrosus. Pericellular perlecan interacts with collagen VI and XI to define and stabilize this matrix compartment which has a strategic position facilitating two-way cell-matrix communication between the cell and its wider extracellular matrix. Cues from the extracellular matrix are fed through this pericellular matrix back to the chondrocyte, allowing it to perceive and respond to subtle microenvironmental changes to regulate tissue homeostasis. Thus perlecan plays a key regulatory role in chondrocyte metabolism, and in chondrocyte differentiation. Perlecan acts as a transport proteoglycan carrying poorly soluble, lipid-modified proteins such as the Wnt or Hedgehog families facilitating the establishment of morphogen gradients that drive tissue morphogenesis. Cell surface perlecan on endothelial cells or osteocytes acts as a flow sensor in blood and the lacunar canalicular fluid providing feedback cues to smooth muscle cells regulating vascular tone and blood pressure, and the regulation of bone metabolism by osteocytes highlighting perlecan's multifaceted roles in load-bearing connective tissues.

A microstructure-based modeling approach to assess aging-sensitive mechanics of human intervertebral disc

BACKGROUND AND OBJECTIVE

The human body soft tissues are hierarchic structures interacting in a complex manner with the surrounding biochemical environment. The loss of soft tissues functionality with age leads to more vulnerability regarding to the external mechanical loadings and increases the risk of injuries. As a main example of the human body soft tissues, the intervertebral disc mechanical response evolution with age is explored. Although the age-dependence of the intervertebral disc microstructure is a well-known feature, no noticeable age effect on the disc stiffness is evidenced in the in-vitro experimental studies of the literature. So, if the disc intrinsic mechanics remains constant, how to explain the correlation of disc degeneration and disc functionality loss with age.

METHODS

A microstructure-based modeling approach was developed to assess in-silico the aging-sensitive mechanics of human intervertebral disc. The model considers the relationship between stress/volumetric macro-response and microstructure along with effective age effects acting at the lamellar and multi-lamellar scales. The stress-stretch and transversal responses of the different disc regions were computed for various age groups (13-18, 36, 58, 69 and 82 years old) and their evolution with age was studied.

RESULTS

While matching with in-vitro experimental data, the predicted stiffness was found to increase while passing from adolescent young discs to mature older discs and then to remain almost constant for the rest of life. Important age-related changes in the disc transversal behavior were also predicted affecting the flexibility of the disc, changing its volumetric behavior, and modifying its dimensions.

CONCLUSION

The developed approach was found able to bring new conclusions about age-dependent mechanical properties including regional dependency. The disc mechanics in terms of rigidity, radial and axial transversal responses were found to alter going from adolescent to middle age where the disc reaches a certain maturity. After reaching maturity, the mechanical properties undergo very slight changes until becoming almost constant with age.

Multiscale Regulation of the Intervertebral Disc: Achievements in Experimental, In Silico, and Regenerative Research

Intervertebral disc (IVD) degeneration is a major risk factor of low back pain. It is defined by a progressive loss of the IVD structure and functionality, leading to severe impairments with restricted treatment options due to the highly demanding mechanical exposure of the IVD. Degenerative changes in the IVD usually increase with age but at an accelerated rate in some individuals. To understand the initiation and progression of this disease, it is crucial to identify key top-down and bottom-up regulations' processes, across the cell, tissue, and organ levels, in health and disease. Owing to unremitting investigation of experimental research, the comprehension of detailed cell signaling pathways and their effect on matrix turnover significantly rose. Likewise, in silico research substantially contributed to a holistic understanding of spatiotemporal effects and complex, multifactorial interactions within the IVD. Together with important achievements in the research of biomaterials, manifold promising approaches for regenerative treatment options were presented over the last years. This review provides an integrative analysis of the current knowledge about (1) the multiscale function and regulation of the IVD in health and disease, (2) the possible regenerative strategies, and (3) the in silico models that shall eventually support the development of advanced therapies.

Using inverse finite element analysis to identify spinal tissue behaviour in situ

In computational modelling of musculoskeletal applications, one of the critical aspects is ensuring that a model can capture intrinsic population variability and not only representative of a "mean" individual. Developing and calibrating models with this aspect in mind is key for the credibility of a modelling methodology. This often requires calibration of complex models with respect to 3D experiments and measurements on a range of specimens or patients. Most Finite Element (FE) software's do not have such a capacity embedded in their core tools. This paper presents a versatile interface between Finite Element (FE) software and optimisation tools, enabling calibration of a group of FE models on a range of experimental data. It is provided as a Python toolbox which has been fully tested and verified on Windows platforms. The toolbox is tested in three case studies involving in vitro testing of spinal tissues.

Electrospinning and 3D bioprinting for intervertebral disc tissue engineering

Intervertebral disc (IVD) degeneration is a major cause of low back pain and represents a massive socioeconomic burden. Current conservative and surgical treatments fail to restore native tissue architecture and functionality. Tissue engineering strategies, especially those based on 3D bioprinting and electrospinning, have emerged as possible alternatives by producing cell-seeded scaffolds that replicate the structure of the IVD extracellular matrix. In this review, we provide an overview of recent advancements and limitations of 3D bioprinting and electrospinning for the treatment of IVD degeneration, focusing on future areas of research that may contribute to their clinical translation.

The ultrastructural organization of elastic fibers at the interface of the nucleus and annulus of the intervertebral disk

There has been no study to describe the ultrastructural organization of elastic fibers at the interface of the nucleus pulposus and annulus fibrosus of the intervertebral disk (IVD), a region called the transition zone (TZ). A previously developed digestion technique was optimized to eliminate cells and non-elastin ECM components except for the elastic fibers from the anterolateral (AL) and posterolateral (PL) regions of the TZ in ovine IVDs. Not previously reported, the current study identified a complex elastic fiber network across the TZ for both AL and PL regions. In the AL region, this network consisted of major thick elastic fibers (≈ 1 µm) that were interconnected with delicate (< 200 nm) elastic fibers. While the same ultrastructural organization was observed in the PL region, interestingly the size of the elastic fibers was smaller (< 100 nm) compared to those that were located in the AL region. Quantitative analysis of the elastic fibers revealed significant differences in the size (p < 0.001) and the orientation of elastic fibers (p = 0.001) between the AL and PL regions, with a higher orientation and larger size of elastic fibers observed in the AL region. The gradual elimination of cells and non-elastin extracellular matrix components identified that elastic fibers in the TZ region in combination with the extracellular matrix created a honeycomb structure that was more compact at the AF interface compared to that located close to the NP. Three different symmetrically organized angles of rotation (0⁰ and ±90⁰) were detected for the honeycomb structure at both interfaces, and the structure was significantly orientated at the TZ-AF compared to the TZ-NP interface (p = 0.003).

Elastic fibers: The missing key to improve engineering concepts for reconstruction of the Nucleus Pulposus in the intervertebral disc

The increasing prevalence of low back pain has imposed a heavy economic burden on global healthcare systems. Intense research activities have been performed for the regeneration of the Nucleus Pulposus (NP) of the IVD; however, tissue-engineered scaffolds have failed to capture the multi-scale structural hierarchy of the native tissue. The current study revealed for the first time, that elastic fibers form a network across the NP consisting of straight and thick parallel fibers that were interconnected by wavy fine fibers and strands. Both straight fibers and twisted strands were regularly merged or branched to form a fine elastic network across the NP. As a key structural feature, ultrathin (53 ± 7 nm), thin (215 ± 20 nm), and thick (890 ± 12 nm) elastic fibers were observed in the NP. While our quantitative analysis for measurement of the thickness of elastic fibers revealed no significant differences (p < 0.633), the preferential orientation of fibers was found to be significantly different (p < 0.001) across the NP. The distribution of orientation for the elastic fibers in the NP represented one major organized angle of orientation except for the central NP. We found that the distribution of elastic fibers in the central NP was different from those located in the peripheral regions representing two symmetrically organized major peaks (±45⁰). No significant differences in the maximum fiber count at the major angles of orientation (±45⁰) were observed for both peripheral (p = 0.427) and central NP (p = 0.788). Based on these new findings a structural model for the elastic fibers in the NP was proposed. The geometrical presentation, along with the distribution of elastic fibers orientation, resulting from the present study identifies the ultrastructural organization of elastic fibers in the NP important towards understanding their mechanical role which is still under investigation. Given the results of this new geometrical analysis, more-accurate multiscale finite element models can now be developed, which will provide new insights into the mechanobiology of the IVD. In addition, the results of this study can potentially be used for the fabrication of bio-inspired tissue-engineered scaffolds and IVD models to truly capture the multi-scale structural hierarchy of IVDs. STATEMENT OF SIGNIFICANCE: Visualization of elastic fibers in the nucleus of the intervertebral disk under high magnification was not reported before. The present research utilized extracellular matrix partial digestion to address significant gaps in understanding of nucleus microstructure that can potentially be used for the fabrication of bio-inspired tissue-engineered scaffolds and disk models to truly capture the multi-scale structural hierarchy of discs.

The therapeutic effect of TBK1 in intervertebral disc degeneration via coordinating selective autophagy and autophagic functions

Introduction

While its innate immune function has been known, recent works of literature have focused on the role of Tank binding kinase 1 (TBK1) in regulating autophagy and it is unknown whether TBK1 protects against intervertebral disc degeneration (IVDD) through affecting autophagy.

Objectives

Here, we aim to explore whether TBK1 is implicated in the pathogenesis of IVDD, and investigated the potential mechanism.

Methods

Western blotting and immunohistochemistry were used to detect the TBK1 expression in human and rat NP tissue. After TBK1 overexpression in NP cells with lentivirus transfection, autophagic flux, apoptosis and senescence percentage were assessed. Si-RNA , a utophagy inhibitors and protein phosphatase inhibitors were applied to study the mechanism of autophagy regulation. In vivo study, we further evaluated the therapeutic action of lentivirus-TBK1(Lv-TBK1)injection in a rodent IVDD model.

Results

The TBK1 level was reduced in rat and human NP tissue. TBK1 overexpression protected against apoptosis and premature senescence. These functions of TBK1 were abolished by chloroquine-medicated autophagy inhibition.P-TBK1, an activation form of TBK, is involved in selective autophagy through directly phosphorylating P62 at Ser 403, and the activation of TBK1 is also dependent on Parkin manner. TBK1 also activated NPCs autophagy to relieve puncture injury in vivo.

Conclusion

We demonstrated that TBK1 overexpression attenuated senescence and apoptosis and promoted NPCs survival via upregulating autophagy. TBK1 represents a promising avenue for IVDD treatment.

Advanced Strategies for the Regeneration of Lumbar Disc Annulus Fibrosus

Damage to the annulus fibrosus (AF), the outer region of the intervertebral disc (IVD), results in an undesirable condition that may accelerate IVD degeneration causing low back pain. Despite intense research interest, attempts to regenerate the IVD have failed so far and no effective strategy has translated into a successful clinical outcome. Of particular significance, the failure of strategies to repair the AF has been a major drawback in the regeneration of IVD and nucleus replacement. It is unlikely to secure regenerative mediators (cells, genes, and biomolecules) and artificial nucleus materials after injection with an unsealed AF, as IVD is exposed to significant load and large deformation during daily activities. The AF defects strongly change the mechanical properties of the IVD and activate catabolic routes that are responsible for accelerating IVD degeneration. Therefore, there is a strong need to develop effective therapeutic strategies to prevent or reconstruct AF damage to support operational IVD regenerative strategies and nucleus replacement. By the way of this review, repair and regenerative strategies for AF reconstruction, their current status, challenges ahead, and future outlooks were discussed.

Interlamellar-induced time-dependent response of intervertebral disc annulus: A microstructure-based chemo-viscoelastic model

The annulus fibrosus of the intervertebral disc exhibits an unusual transversal behavior for which a constitutive representation that considers as well regional effect, chemical sensitivity and time-dependency has not yet been developed, and it is hence the aim of the present contribution. A physically-based model is proposed by introducing a free energy function that takes into account the actual disc annulus structure in relation with the surrounding biochemical environment. The response is assumed to be dominated by the viscoelastic contribution of the extracellular matrix, the elastic contribution of the oriented collagen fibers and the osmo-induced volumetric contribution of the internal fluid content variation. The regional dependence of the disc annulus response due to variation in fibers content/orientation allows a micromechanical treatment of the soft tissue. A finite element model of the annulus specimen is designed while taking into consideration the 'interlamellar' ground substance zone between lamellae of the layered soft tissue. The kinetics is designed using full-field strain measurements performed on specimens extracted from two disc annulus regions and tested under different osmotic conditions. The time-dependency of the tissue response is reported on stress-free volumetric changes, on hysteretic stress and transversal strains during quasi-static stretching at different strain-rates and on their temporal changes during an interrupted stretching. Considering the effective contributions of the internal fluid transfer and the extracellular matrix viscosity, the microstructure-based chemo-mechanical model is found able to successfully reproduce the significant features of the macro-response and the unusual transversal behavior including the strong regional dependency from inner to outer parts of the disc: Poisson's ratio lesser than 0 (auxetic) in lamellae plane, higher than 0.5 in fibers plane, and their temporal changes towards usual values (between 0 and 0.5) at chemo-mechanical equilibrium. The underlying time-dependent mechanisms occurring in the tissue are analyzed via the local numerical fields and important insights about the effective role of the interlamellar zone are revealed for the different disc localizations. STATEMENT OF SIGNIFICANCE: The structural complexity of the annulus fibrosus has only been appreciated through recent experimental contributions and a constitutive representation that considers as well regional effect, chemical sensitivity and time-dependency of the unusual transversal behavior has not yet been developed. Here, a microstructure-based chemo-viscoelastic model is developed to highlight the interlamellar-induced time-dependent response by means of a two-scale strategy. The model provides important insights about the origin of the time-dependent phenomena in disc annulus along with regional dependency, essential for understanding disc functionality.

Multi-laminate annulus fibrosus repair scaffold with an interlamellar matrix enhances impact resistance, prevents herniation and assists in restoring spinal kinematics

Focal defects in the annulus fibrosus (AF) of the intervertebral disc (IVD) arising from herniation have detrimental impacts on the IVD's mechanical function. Thus, biomimetic-based repair strategies must restore the mechanical integrity of the AF to help support and restore native spinal loading and motion. Accordingly, an annulus fibrosus repair patch (AFRP); a collagen-based multi-laminate scaffold with an angle-ply architecture has been previously developed, which demonstrates similar mechanical properties to native outer AF (oAF). To further enhance the mimetic nature of the AFRP, interlamellar (ILM) glycosaminoglycan (GAG) was incorporated into the scaffolds. The ability of the scaffolds to withstand simulated impact loading and resist herniation of native IVD tissue while contributing to the restoration of spinal kinematics were assessed separately. The results demonstrate that incorporation of a GAG-based ILM significantly increased (p < 0.001) the impact strength of the AFRP (2.57 ± 0.04 MPa) compared to scaffolds without (1.51 ± 0.13 MPa). Additionally, repair of injured functional spinal units (FSUs) with an AFRP in combination with sequestering native NP tissue and a full-thickness AF tissue plug enabled the restoration of creep displacement (p = 0.134), short-term viscous damping coefficient (p = 0.538), the long-term viscous (p = 0.058) and elastic (p = 0.751) damping coefficients, axial neutral zone (p = 0.908), and axial range of motion (p = 0.476) to an intact state. Lastly, the AFRP scaffolds were able to prevent native IVD tissue herniation upon application of supraphysiologic loads (5.28 ± 1.24 MPa). Together, these results suggest that the AFRP has the strength to sequester native NP and AF tissue and/or implants, and thus, can be used in a composite repair strategy for IVDs with focal annular defects thereby assisting in the restoration of spinal kinematics.

Synchrotron tomography of intervertebral disc deformation quantified by digital volume correlation reveals microstructural influence on strain patterns

The intervertebral disc (IVD) has a complex and multiscale extracellular matrix structure which provides unique mechanical properties to withstand physiological loading. Low back pain has been linked to degeneration of the disc but reparative treatments are not currently available. Characterising the disc's 3D microstructure and its response in a physiologically relevant loading environment is required to improve understanding of degeneration and to develop new reparative treatments. In this study, techniques for imaging the native IVD, measuring internal deformation and mapping volumetric strain were applied to an in situ compressed ex vivo rat lumbar spine segment. Synchrotron X-ray micro-tomography (synchrotron CT) was used to resolve IVD structures at microscale resolution. These image data enabled 3D quantification of collagen bundle orientation and measurement of local displacement in the annulus fibrosus between sequential scans using digital volume correlation (DVC). The volumetric strain mapped from synchrotron CT provided a detailed insight into the micromechanics of native IVD tissue. The DVC findings showed that there was no slipping at lamella boundaries, and local strain patterns were of a similar distribution to the previously reported elastic network with some heterogeneous areas and maximum strain direction aligned with bundle orientation, suggesting bundle stretching and sliding. This method has the potential to bridge the gap between measures of macro-mechanical properties and the local 3D micro-mechanical environment experienced by cells. This is the first evaluation of strain at the micro scale level in the intact IVD and provides a quantitative framework for future IVD degeneration mechanics studies and testing of tissue engineered IVD replacements. STATEMENT OF SIGNIFICANCE: Synchrotron in-line phase contrast X-ray tomography provided the first visualisation of native intact intervertebral disc microstructural deformation in 3D. For two annulus fibrosus volumes of interest, collagen bundle orientation was quantified and local displacement mapped as strain. Direct evidence of microstructural influence on strain patterns could be seen such as no slipping at lamellae boundaries and maximum strain direction aligned with collagen bundle orientation. Although disc elastic structures were not directly observed, the strain patterns had a similar distribution to the previously reported elastic network. This study presents technical advances and is a basis for future X-ray microscopy, structural quantification and digital volume correlation strain analysis of soft tissue.

Extensive mechanical tension promotes annulus fibrosus cell senescence through suppressing cellular autophagy

Background: Mechanical load contributes a lot to the initiation and progression of disc degeneration. Annulus fibrosus (AF) cell biology under mechanical tension remains largely unclear.

Objective: The present study was aimed to investigate AF cell senescence under mechanical tension and the potential role of autophagy.

Methods: Rat AF cells were cultured and experienced different magnitudes (5% elongation and 20% elongation) of mechanical tension for 12 days. Control AF cells were kept static. Cell proliferation, telomerase activity, cell cycle fraction, and expression of senescence-related molecules (p16 and p53) and matrix macromolecules (aggrecan and collagen I) were analyzed to evaluate cell senescence. In addition, expression of Beclin-1 and LC3, and the ratio of LC3-II to LC3-I were analyzed to investigate cell autophagy.

Results: Compared with the control group and 5% tension group, 20% tension group significantly decreased cell proliferation potency and telomerase activity, increased G1/G0 phase fraction, and up-regulated gene/protein expression of p16 and p53, whereas down-regulated gene/protein expression of aggrecan and collagen I. In addition, autophagy-related parameters such as gene/protein expression of Beclin-1 and LC3, and the ratio of LC3-II to LC3-I, were obviously suppressed in the 20% tension group.

Conclusion: High mechanical tension promotes AF cell senescence though suppressing cellular autophagy. The present study will help us to better understand AF cell biology under mechanical tension and mechanical load-related disc degeneration.

A growth-based model for the prediction of fiber angle distribution in the intervertebral disc annulus fibrosus

There is a growing interest in the development of patient-specific finite element models of the human lumbar spine for both the assessment of injury risk and the development of treatment strategies. A current challenge in implementing these models is that the outer annulus fibrosus of the disc is composed of concentric sheets of aligned collagen fibers, the helical angles of which vary spatially. In finite element models, fiber angle is typically assumed to be constant, based on average experimental measurements from a small number of locations. The present study hypothesized that the full spatial distribution of fiber angles in the annulus fibrosus may be predicted for any disc geometry by assuming growth from a thin cylinder with constant fiber angle. This hypothesis was tested by developing an analytical model of disc growth and calibrating it with fiber angle measurements of adult bovine caudal discs. The calibrated model was then run on a representative human lumbar disc geometry. The model was able to accurately predict fiber angle distributions in both the experimental bovine caudal disc measurements and literature-reported human lumbar disc measurements. Despite its theoretical basis in development, the model requires only mature state geometry, making it practical for implementation in patient-specific finite element analyses, in which disc geometry is obtained from clinical imaging.

Responses of apoptosis and matrix metabolism of annulus fibrosus cells to different magnitudes of mechanical tension in vitro

Background: Annulus fibrosus (AF) is important to confine disc nucleus pulposus (NP) tissue during mechanical load experience. However, the knowledge on AF cell biology under mechanical load is much limited compared with disc NP. Objective: The present study aimed to investigate responses of apoptosis and matrix metabolism of AF cells to different magnitudes of mechanical tension in vitro. Methods: Rat AF cells were subjected to different magnitudes (5, 10, and 20% elongations at a frequency of 1.0 Hz for 6 h per day) of mechanical tension for 7 days. Control AF cells were cultured without mechanical tension. Cell apoptosis ratio, caspase-3 activity, gene/protein expression of apoptosis-related molecules (Bcl-2, Bax, caspase-3/cleaved caspase-3 and cleaved PARP), matrix macromolecules (aggrecan and collagen I) and matrix metabolism-related enzymes (TIMP-1, TIMP-3, MMP-3, and ADAMTS-4) were analyzed. Results: Compared with 5% tension group and control group, 10 and 20% tension groups significantly increased apoptosis ratio, caspase-3 activity, up-regulated gene/protein expression of Bax, caspase-3/cleaved caspase-3, cleaved PARP, MMP-3, and ADAMTS-4, whereas down-regulated gene/protein expression of Bcl-2, aggrecan, collagen I, TIMP-1, and TIMP-3. No significant difference was found in these parameters apart from Bcl-2 expression between the control group and 5% tension group. Conclusion: High mechanical tension promotes AF cell apoptosis and suppresses AF matrix synthesis compared with low mechanical tension. The present study indirectly indicates how mechanical overload induces disc degeneration through affecting AF biology.

Mesenchymal Stem Cells Induced by Microencapsulated Chondrocytes on Repairing of Intervertebral Disc Degeneration

OBJECTIVE

To evaluate the therapeutic effects of mesenchymal stem cells induced by microencapsulated chondrocytes on repairing of intervertebral disc degeneration.

METHODS

Rabbit chondrocytes and bone marrow-derived mesenchymal stem cells (MSC) were derived. Chondrocytes were microencapsulated by a microcapsule generator to produce microencapsulated chondrocytes (MEC). MSC were then co-cultured with MEC (MSC-MEC) and the properties and the therapeutic effects on repairing of intervertebral disc degeneration were studied. For the in vitro study, cell proliferation, type II collagen, and glycosaminoglycan (GAG) were studied. The MSC induced by chondrocytes in the Transwell system (MSC-MLC) and pure MSC were used as the control group. For the in vivo studied, MSC-MEC were implanted into the intervertebral disc degenerated (IDD) models, and the radiological images, biomechanical properties, collagen II, and histology of the discs were studied. The IDD, MSC, and MSC-MLC groups were used as the control group.

RESULTS

In the in vitro study, no significant differences were found among the three groups, indicating that the microcapsule co-culture system will not affect the proliferation of MSC. The type II collagen quantity secreted by MSC-MEC was 23.57 ± 2.46 ng/μL, which was more than for MSC-MLC (15.14 ± 2.31 ng/μL) and MSC groups (4.17 ± 1.23 ng/μL, all P < 0.025). GAG secreted by MSC-MEC was 0.184 ± 0.006 mg/well, which was more than for the MSC-MLC (0.151 ± 0.011 mg/well) and MSC groups (0.023 ± 0.002 mg/well, all P < 0.025). In the in vivo study, no obvious degenerative or protrusive disc was found in the MSC-MEC group, while protrusive discs could be found in the MSC-MLC group, and both degenerative and protrusive discs were found in MSC and IDD groups, which indicated that the reparative effects of MSC-MEC on degenerated discs were better than for the control groups. Biomechanical properties of discs in the MSC-MEC group were maintained at all four time points (2nd, 4th, 8th, and 16th week after implantation). The compressive strength (CS) and the elastic modulus (EM) of MSC and IDD groups were consistently decreased. The CS of the MSC-MLC group was increased in the 4th week but decreased again in the 8th week, while the EM of the MSC-MLC group consistently decreased. Western blot results indicated that discs of the MSC-MEC group had more collagen II, which is an important component of discs. Histology staining showed that the nucleus pulposus of MSC-MEC was complete; no obvious fragment of component loss was found, while those of MSC-MLC, MSC, and IDD groups were widened, broken, and hollow.

CONCLUSION

The microencapsulation method for half-contact co-culturing improves the differentiation extent of MSC, and MSC induced by chondrocytes could also be used for treatment of IDD.

The Mechanical Role of the Radial Fiber Network Within the Annulus Fibrosus of the Lumbar Intervertebral Disc: A Finite Elements Study

The annulus fibrosus (AF) of the intervertebral disc (IVD) consists of a set of concentric layers composed of a primary circumferential collagen fibers arranged in an alternating oblique orientation. Moreover, there exists an additional secondary set of radial translamellar collagen fibers which connects the concentric layers, creating an interconnected fiber network. The aim of this study was to investigate the mechanical role of the radial fiber network. Toward that goal, a three-dimensional (3D) finite element model of the L3–L4 spinal segment was generated and calibrated to axial compression and pure moment loading. The AF model explicitly recognizes the two heterogeneous networks of fibers. The presence of radial fibers demonstrated a pronounced effect on the local disc responses under lateral bending, flexion, and extension modes. In these modes, the radial fibers were in a tensile state in the disc region that subjected to compression. In addition, the circumferential fibers, on the opposite side of the IVD, were also under tension. The local stress in the matrix was decreased in up to 9% in the radial fibers presence. This implies an active fiber network acting collectively to reduce the stresses and strains in the AF lamellae. Moreover, a reduction of 26.6% in the matrix sideways expansion was seen in the presence of the radial fibers near the neutral bending axis of the disc. The proposed biomechanical model provided a new insight into the mechanical role of the radial collagen fibers in the AF structure. This model can assist in the design of future IVD substitutes.

Three-dimensional microstructural reconstruction of the ovine intervertebral disc using ultrahigh field MRI

BACKGROUND

The intervertebral disc (IVD) is a complex organ that acts as a flexible coupling between two adjacent vertebral bodies and must therefore accommodate compression, bending, and torsion. It consists of three main components, which are elegantly structured to allow this: the annulus fibrosus (AF), the nucleus pulposus (NP), and the end-plates (EP).

PURPOSE

Thus far, it has not been possible to examine the microarchitecture of the disc directly in three dimensions in its unaltered state and thus knowledge of the overall architecture of the disc has been inferred from a range of imaging sources, or by using destructive methods.

STUDY DESIGN

A nondestructive ultrahigh field Magnetic Resonance Imaging (MRI) of 11.7 T was used together with image analysis to visualize the ovine IVDs.

METHODS

Three-dimensional image stacks from eight IVDs harvested from sheep, half of which were 4 to 5 years old and the others approximately 2 years old were reconstructed and examined, and their microstructure were imaged. The overall structure of the disc, including the average of 14 AF lamellae (9-28), NP, and EP was then visualized with particular attention given to integrating elements as radial translamellar cross-links, AF-NP transition zone EP-AF integration and EP-NP insertion nodes (ie the connecting junctions between the EP and NP). Moreover, collagen fiber orientation was determined at different depths and locations throughout the annulus.

RESULTS

It was found that there was a clearer demarcation in the AF-NP transition zone of the younger discs compared with the older ones. This difference was reflected in the visibility of AF-NP and EP-AF integration. It was also possible to view the fiber architecture of the AF-NP integration in greater depth than was possible previously with histological techniques. These fibers were mainly observed in the younger discs and their length was measured to be of 2.6 ± 0.2 mm.

CONCLUSIONS

The present results provide a substantial advance in visualization of the three-dimensional architecture of an intact IVD and the integration of its components.

Annulus fibrosus cell phenotypes in homeostasis and injury: implications for regenerative strategies

Despite considerable efforts to develop cellular, molecular, and structural repair strategies and restore intervertebral disk function after injury, the basic biology underlying intervertebral disk healing remains poorly understood. Remarkably, little is known about the origins of cell populations residing within the annulus fibrosus, or their phenotypes, heterogeneity, and roles during healing. This review focuses on recent literature highlighting the intrinsic and extrinsic cell types of the annulus fibrosus in the context of the injury and healing environment. Spatial, morphological, functional, and transcriptional signatures of annulus fibrosus cells are reviewed, including inner and outer annulus fibrosus cells, which we propose to be referred to as annulocytes. The annulus also contains peripheral cells, interlamellar cells, and potential resident stem/progenitor cells, as well as macrophages, T lymphocytes, and mast cells following injury. Phases of annulus fibrosus healing include inflammation and recruitment of immune cells, cell proliferation, granulation tissue formation, and matrix remodeling. However, annulus fibrosus healing commonly involves limited remodeling, with granulation tissues remaining, and the development of chronic inflammatory states. Identifying annulus fibrosus cell phenotypes during health, injury, and degeneration will inform reparative regeneration strategies aimed at improving annulus fibrosus healing.

New insights into the viscoelastic and failure mechanical properties of the elastic fiber network of the inter-lamellar matrix in the annulus fibrosus of the disc

The mechanical role of elastic fibers in the inter-lamellar matrix (ILM) is unknown; however, it has been suggested that they play a role in providing structural integrity to the annulus fibrosus (AF). Therefore, the aim of this study was to measure the viscoelastic and failure properties of the elastic fiber network in the ILM of ovine discs under both tension and shear directions of loading. Utilizing a technique, isolated elastic fibers within the ILM from ovine discs were stretched to 40% of their initial length at three strain rates of 0.1% s^-1 (slow), 1% s^-1 (medium) and 10% s^-1 (fast), followed by a ramp test to failure at 10% s^-1. A significant strain-rate dependent response was found, particularly at the fastest rate for phase angle and normalized stiffness (p < 0.001). The elastic fibers in the ILM demonstrated a significantly higher capability for energy absorption at slow compared to medium and fast strain rates (p < 0.001). These finding suggests that the elastic fiber network of the ILM exhibits nonlinear elastic behavior. When tested to failure, a significantly higher normalized failure force was found in tension compared to shear loading (p = 0.011), which is consistent with the orthotropic structure of elastic fibers in the ILM. The results of this study confirmed the mechanical contribution of the elastic fiber network to the ILM and the structural integrity of the AF. This research serves as a foundation for future studies to investigate the relationship between degeneration and ILM mechanical properties.

STATEMENT OF SIGNIFICANCE

The mechanical role of elastic fibres in the inter-lamellar matrix (ILM) of the disc is unknown. The viscoelastic and failure properties of the elastic fibre network in the ILM in both tension and shear directions of loading was measured for the first time. We found a strain-rate dependent response for the elastic fibres in the ILM. The elastic fibres in the ILM demonstrated a significantly higher capability for energy absorption at slow compared to medium and fast strain rates. When tested to failure, a significantly higher normalized failure force was found in tension compared to shear loading, which is consistent with the orthotropic structure of elastic fibres in the ILM.

Polyurethane as a strategy for annulus fibrosus repair and regeneration: a systematic review

Aim: Disc herniation is a spine disease that leads to suffering and disability. Discectomy is a Janus-faced approach that relieves pain symptoms but leave the intervertebral discs predisposed to herniation. This systematic review discussed the mechanical and biological requirements for a polyurethane-based biomaterial to be used in annular repair. Methods: Search strategy was performed in PubMed, Web of Science and Scopus databases to define the main mechanical properties, biological findings and follow-up aspects of these biomaterials. The range was limited to articles published from January 2000 to December 2017 in English language. Results: The search identified 82 articles. From these, a total of 18 articles underwent a full-text analysis, and 16 studies were included in the review. Conclusion: The polyurethane presents suitable properties to be used as an engineered solution to re-establish the microenvironment and biomechanical features of the intervertebral disc.

New findings confirm the viscoelastic behaviour of the inter-lamellar matrix of the disc annulus fibrosus in radial and circumferential directions of loading

While few studies have improved our understanding of composition and organization of elastic fibres in the inter-lamellar matrix (ILM), its clinical relevance is not fully understood. Moreover, no studies have measured the direct tensile and shear failure and viscoelastic properties of the ILM. Therefore, the aim of this study was, for the first time, to measure the viscoelastic and failure properties of the ILM in both the tension and shear directions of loading. Using an ovine model, isolated ILM samples were stretched to 40% of their initial length at three strain rates of 0.1%s^-1 (slow), 1%s^-1 (medium) and 10%s^-1 (fast) and a ramp test to failure was performed at a strain rate of 10%s^-1. The findings from this study identified that the stiffness of the ILM was significantly larger at faster strain rates, and energy absorption significantly smaller, compared to slower strain rates, and the viscoelastic and failure properties were not significantly different under tension and shear loading. We found a strain rate dependent response of the ILM during dynamic loading, particularly at the fastest rate. The ILM demonstrated a significantly higher capability for energy absorption at slow strain rates compared to medium and fast strain rates. A significant increase in modulus was found in both loading directions and all strain rates, having a trend of larger modulus in tension and at faster strain rates. The finding of no significant difference in failure properties in both loading directions, was consistent with our previous ultra-structural studies that revealed a well-organized (±45°) elastic fibre orientation in the ILM. The results from this study can be used to develop and validate finite element models of the AF at the tissue scale, as well as providing new strategies for fabricating tissue engineered scaffolds.

STATEMENT OF SIGNIFICANCE

While few studies have improved our understanding of composition and organization of elastic fibres in the inter-lamellar matrix (ILM) of the annulus in the disc no studies have measured the direct mechanical failure and viscoelastic properties of the ILM. The findings from this study identified that the stiffness of the ILM was significantly larger at faster strain rates, and energy absorption significantly smaller, compared to slower strain rates. The failure properties of the ILM were not significantly different under tension and shear.

Ultrastructural organization of elastic fibres in the partition boundaries of the annulus fibrosus within the intervertebral disc

The relationship between elastic fibre disorders and disc degeneration, aging and progression of spine deformity have been discussed in a small number of studies. However, the clinical relevance of elastic fibres in the annulus fibrosus (AF) of the disc is poorly understood. Ultrastructural visualization of elastic fibres is an important step towards understanding their structure-function relationship. In our previous studies, a novel technique for visualization of elastic fibres across the AF was presented and their ultrastructural organization in intra- and inter-lamellar regions was compared. Using the same novel technique in the present study, the ultrastructural organization of elastic fibres in the partition boundaries (PBs), which are located between adjacent collagen bundles, is presented for the first time. Visualization of elastic fibres in the PBs in control and partially digested (digested) samples was compared, and their orientation in two different cutting planes (transverse and oblique) were discussed. The ultrastructural analysis revealed that elastic fibres in PBs were a well-organized dense and complex network having different size and shape. Adjacent collagen bundles in a cross section (CS) lamella appear to be connected to each other, where elastic fibres in the PBs were merged in parallel or penetrated into the collagen bundles. There was no significant difference in directional coherency coefficient of elastic fibres between the two different cutting planes (p = .35). The present study revealed that a continuous network of elastic fibres may provide disc integrity by connecting adjacent bundles of CS lamellae together. Compared to our previous studies, the density of the elastic fibre network in PBs was lower, and fibre orientation was similar to the intra-lamellar space and inter-lamellar matrix.

STATEMENT OF SIGNIFICANCE

A detailed ultrastructural study in the partition boundaries of the annulus fibrosus within the disc revealed a well-organized elastic fibre network with a complex ultrastructure. The continuous network of elastic fibres may provide disc integrity by connecting adjacent bundles of cross section lamellae together. The density of the elastic fibre network in PBs was lower, and fibre orientation was similar to the intra-lamellar space and the inter-lamellar matrix.

The ultra-structural organization of the elastic network in the intra- and inter-lamellar matrix of the intervertebral disc

The inter-lamellar matrix (ILM)-located between adjacent lamellae of the annulus fibrosus-consists of a complex structure of elastic fibers, while elastic fibers of the intra-lamellar region are aligned predominantly parallel to the collagen fibers. The organization of elastic fibers under low magnification, in both inter- and intra-lamellar regions, was studied by light microscopic analysis of histologically prepared samples; however, little is known about their ultrastructure. An ultrastructural visualization of elastic fibers in the inter-lamellar matrix is crucial for describing their contribution to structural integrity, as well as mechanical properties of the annulus fibrosus. The aims of this study were twofold: first, to present an ultrastructural analysis of the elastic fiber network in the ILM and intra-lamellar region, including cross section (CS) and in-plane (IP) lamellae, of the AF using Scanning Electron Microscopy (SEM) and second, to -compare the elastic fiber orientation between the ILM and intra-lamellar region. Four samples (lumbar sheep discs) from adjacent sections (30μm thickness) of anterior annulus were partially digested by a developed NaOH-sonication method for visualization of elastic fibers by SEM. Elastic fiber orientation and distribution were quantified relative to the tangential to circumferential reference axis. Visualization of the ILM under high magnification revealed a dense network of elastic fibers that has not been previously described. Within the ILM, elastic fibers form a complex network, consisting of different size and shape fibers, which differed to those located in the intra-lamellar region. For both regions, the majority of fibers were oriented near 0° with respect to tangential to circumferential (TCD) direction and two minor symmetrical orientations of approximately±45°. Statistically, the orientation of elastic fibers between the ILM and intra-lamellar region was not different (p=0.171). The present study used extracellular matrix partial digestion to address significant gaps in understanding of disc microstructure and will contribute to multidisciplinary ultrastructure-function studies.

STATEMENT OF SIGNIFICANCE

Visualization of the intra-lamellar matrix under high magnification revealed a dense network of elastic fibers that has not been previously described. The present study used extracellular matrix partial digestion to address significant gaps in understanding of disc microstructure and will contribute to multidisciplinary ultrastructure-function studies.