Measuring the stratum corneum reservoir: desorption kinetics from keratin

Transdermal and lateral effective diffusivities for drug transport in stratum corneum from a microscopic anisotropic diffusion model

This paper presents a computational model of molecular diffusion through the interfollicular stratum corneum. Specifically, it extends an earlier two-dimensional microscopic model for the permeability in two ways: (1) a microporous leakage pathway through the intercellular lipid lamellae allows slow permeation of highly hydrophilic permeants through the tissue; and (2) the model yields explicit predictions of both lateral (D‾_‖^sc) and transdermal (D‾_⊥^sc) effective (average, homogenized) diffusivities of solutes within the tissue. We present here the mathematical framework for the analysis and a comparison of the predictions with experimental data on desorption of both hydrophilic and lipophilic solutes from human stratum corneum in vitro. Diffusion in the lipid lamellae is found to make the effective diffusivity highly anisotropic, with the predicted ratio D‾_‖^sc/D‾_⊥^sc ranging from 34-39 for fully hydrated skin and 150 to more than 1000 for partially hydrated skin. The diffusivities and their ratio are in accord with both experimental data and the results of mathematical analyses performed by others.

Multi-phase multi-layer mechanistic dermal absorption (MPML MechDermA) model to predict local and systemic exposure of drug products applied on skin

Physiologically-based pharmacokinetic models combine knowledge about physiology, drug product properties, such as physicochemical parameters, absorption, distribution, metabolism, excretion characteristics, formulation attributes, and trial design or dosing regimen to mechanistically simulate drug pharmacokinetics (PK). The current work describes the development of a multiphase, multilayer mechanistic dermal absorption (MPML MechDermA) model within the Simcyp Simulator capable of simulating uptake and permeation of drugs through human skin following application of drug products to the skin. The model was designed to account for formulation characteristics as well as body site- and sex- population variability to predict local and systemic bioavailability. The present report outlines the structure and assumptions of the MPML MechDermA model and includes results from simulations comparing absorption at multiple body sites for two compounds, caffeine and benzoic acid, formulated as solutions. Finally, a model of the Feldene (piroxicam) topical gel, 0.5% was developed and assessed for its ability to predict both plasma and local skin concentrations when compared to in vivo PK data.

Impact of solvent dry down, vehicle pH and slowly reversible keratin binding on skin penetration of cosmetic relevant compounds: I. Liquids

To measure progress and evaluate performance of the newest UB/UC/P&G skin penetration model we simulated an 18-compound subset of finite dose in vitro human skin permeation data taken from a solvent-deposition study of cosmetic-relevant compounds (Hewitt et al., J. Appl. Toxicol. 2019, 1-13). The recent model extension involved slowly reversible binding of solutes to stratum corneum keratins. The selected subset was compounds that are liquid at skin temperature. This set was chosen to distinguish between slow binding and slow dissolution effects that impact solid phase compounds. To adequately simulate the physical experiments there was a need to adjust the evaporation mass transfer coefficient to better represent the diffusion cell system employed in the study. After this adjustment the model successfully predicted both dermal delivery and skin surface distribution of 12 of the 18 compounds. Exceptions involved compounds that were cysteine-reactive, highly water-soluble or highly ionized in the dose solution. Slow binding to keratin, as presently parameterized, was shown to significantly modify the stratum corneum kinetics and diffusion lag times, but not the ultimate disposition, of the more lipophilic compounds in the dataset. Recommendations for further improvement of both modeling methods and experimental design are offered.

Modeling the Percutaneous Absorption of Solvent-deposited Solids Over a Wide Dose Range

The transient absorption of two skin care agents, niacinamide (nicotinamide, NA) and methyl nicotinate (MN), solvent-deposited on ex vivo human skin mounted in Franz diffusion cells has been analyzed according to a new variation on a recently published mechanistic skin permeability model (Yu et al. 2020. J Pharm Sci 110:2149-56). The model follows the absorption and evaporation of two components, solute and solvent, and it includes both a follicular transport component and a dissolution rate limitation for high melting, hydrophilic solids deposited on the skin. Explicit algorithms for improving the simulation of transient diffusion of solvent-deposited solids are introduced. The simulations can account for the ex vivo skin permeation time course of both NA and MN over a dose range exceeding 4.5 orders of magnitude. The model allows one to describe on a mechanistic basis why the percutaneous absorption rate of NA is approximately 60-fold lower than that of its lower melting, more lipophilic analog, MN. It furthermore suggests that MN perturbs stratum corneum barrier lipids and increases their permeability while NA does not, presenting a challenge to molecular modelers engaged in simulating biological lipid barriers.

Topical drug delivery: History, percutaneous absorption, and product development

Topical products, widely used to manage skin conditions, have evolved from simple potions to sophisticated delivery systems. Their development has been facilitated by advances in percutaneous absorption and product design based on an increasingly mechanistic understanding of drug-product-skin interactions, associated experiments, and a quality-by-design framework. Topical drug delivery involves drug transport from a product on the skin to a local target site and then clearance by diffusion, metabolism, and the dermal circulation to the rest of the body and deeper tissues. Insights have been provided by Quantitative Structure Permeability Relationships (QSPR), molecular dynamics simulations, and dermal Physiologically Based PharmacoKinetics (PBPK). Currently, generic product equivalents of reference-listed products dominate the topical delivery market. There is an increasing regulatory interest in understanding topical product delivery behavior under 'in use' conditions and predicting in vivo response for population variations in skin barrier function and response using in silico and in vitro findings.

Injectable Capsaicin for the Management of Pain Due to Osteoarthritis

Capsaicin is a potent agonist of the TRPV1 channel, a transduction channel that is highly expressed in nociceptive fibers (pain fibers) throughout the peripheral nervous system. Given the importance of TRPV1 as one of several transduction channels in nociceptive fibers, much research has been focused on the potential therapeutic benefits of using TRPV1 antagonists for the management of pain. However, an antagonist has two limitations. First, an antagonist in principle generally only affects one receptor. Secondly, most antagonists must have an ongoing presence on the receptor to have an effect. Capsaicin overcomes both liabilities by disrupting peripheral terminals of nociceptive fibers that express TRPV1, and thereby affects all of the potential means of activating that pain fiber (not just TRPV1 function). This disruptive effect is dependent on the dose and can occur within minutes. Thus, unlike a typical receptor antagonist, continued bioavailability at the level of the receptor is not necessary. By disrupting the entire terminal of the TRPV1-expressing nociceptive fiber, capsaicin blocks all the activation mechanisms within that fiber, and not just TRPV1 function. Topical capsaicin, an FDA approved treatment for neuropathic pain, addresses pain from abnormal nociceptor activity in the superficial layers of the skin. Effects after a single administration are evident over a period of weeks to months, but in time are fully reversible. This review focuses on the rationale for using capsaicin by injection for painful conditions such as osteoarthritis (OA) and provides an update on studies completed to date.

Physiologically Based Pharmacokinetic Modeling of Transdermal Selegiline and Its Metabolites for the Evaluation of Disposition Differences between Healthy and Special Populations

A physiologically based pharmacokinetic (PBPK) model of selegiline (SEL), and its metabolites, was developed in silico to evaluate the disposition differences between healthy and special populations. SEL is metabolized to methamphetamine (MAP) and desmethyl selegiline (DMS) by several CYP enzymes. CYP2D6 metabolizes the conversion of MAP to amphetamine (AMP), while CYP2B6 and CYP3A4 predominantly mediate the conversion of DMS to AMP. The overall prediction error in simulated PK, using the developed PBPK model, was within 0.5-1.5-fold after intravenous and transdermal dosing in healthy and elderly populations. Simulation results generated in the special populations demonstrated that a decrease in cardiac output is a potential covariate that affects the SEL exposure in renally impaired (RI) and hepatic impaired (HI) subjects. A decrease in CYP2D6 levels increased the systemic exposure of MAP. DMS exposure increased due to a reduction in the abundance of CYP2B6 and CYP3A4 in RI and HI subjects. In addition, an increase in the exposure of the primary metabolites decreased the exposure of AMP. No significant difference between the adult and adolescent populations, in terms of PK, were observed. The current PBPK model predictions indicate that subjects with HI or RI may require closer clinical monitoring to identify any untoward effects associated with the administration of transdermal SEL patch.

In silico prediction of dermal absorption of pesticides - an evaluation of selected models against results from in vitro testing

Current guidance for the estimation of dermal absorption (DA) of pesticides recommends the use of default values, read-across of information between formulations and in vitro testing. While QSARs exist to estimate percutaneous absorption, their use is currently not encouraged. Therefore, the potential of publicly available models for DA estimation was investigated based on data from 564 human in vitro DA experiments on pesticides. The classic Potts Guy model, the correction of Cleek Bunge for highly lipophilic chemicals, the mechanistic model of Mitragotri, and the COSMOS model were used to estimate the permeability coefficient k_p. Different approaches were explored to calculate the percentage of external dose absorbed. IH SkinPerm was examined as stand-alone model. The models generally failed to accurately predict experimental values. For 30-40% of the predictions, there was overestimation by one order of magnitude. Three models underpredicted >10% of the cases, the remaining models <5%. DA of hydrophilic substances was typically underpredicted. Overprediction was more prominent for solid preparations and suspensions. The molecular weight, irritation potential and skin thickness did not correlate with the models' predictivity. Of the models investigated, IH SkinPerm performed best with 38% of the predictions within one order of magnitude and 2% underpredicted cases.

Determining the Effect of pH on the Partitioning of Neutral, Cationic and Anionic Chemicals to Artificial Sebum: New Physicochemical Insight and QSPR Model

PURPOSE

Sebum is an important shunt pathway for transdermal permeation and targeted delivery, but there have been limited studies on its permeation properties. Here we report a measurement and modelling study of solute partition to artificial sebum.

METHODS

Equilibrium experiments were carried out for the sebum-water partition coefficients of 23 neutral, cationic and anionic compounds at different pH.

RESULTS

Sebum-water partition coefficients not only depend on the hydrophobicity of the chemical but also on pH. As pH increases from 4.2 to 7.4, the partition of cationic chemicals to sebum increased rapidly. This appears to be due to increased electrostatic attraction between the cationic chemical and the fatty acids in sebum. Whereas for anionic chemicals, their sebum partition coefficients are negligibly small, which might result from their electrostatic repulsion to fatty acids. Increase in pH also resulted in a slight decrease of sebum partition of neutral chemicals.

CONCLUSIONS

Based on the observed pH impact on the sebum-water partition of neutral, cationic and anionic compounds, a new quantitative structure-property relationship (QSPR) model has been proposed. This mathematical model considers the hydrophobic interaction and electrostatic interaction as the main mechanisms for the partition of neutral, cationic and anionic chemicals to sebum.

A Measurement and Modeling Study of Hair Partition of Neutral, Cationic, and Anionic Chemicals

Various neutral, cationic, and anionic chemicals contained in hair care products can be absorbed into hair fiber to modulate physicochemical properties such as color, strength, style, and volume. For environmental safety, there is also an interest in understanding hair absorption to wide chemical pollutants. There have been very limited studies on the absorption properties of chemicals into hair. Here, an experimental and modeling study has been carried out for the hair-water partition of a range of neutral, cationic, and anionic chemicals at different pH. The data showed that hair-water partition not only depends on the hydrophobicity of the chemical but also the pH. The partition of cationic chemicals to hair increased with pH, and this is due to their electrostatic interaction with hair increased from repulsion to attraction. For anionic chemicals, their hair-water partition coefficients decreased with increasing pH due to their electrostatic interaction with hair decreased from attraction to repulsion. Increase in pH did not change the partition of neutral chemicals significantly. Based on the new physicochemical insight of the pH effect on hair-water partition, a new quantitative structure property relationship model has been proposed, taking into account of both the hydrophobic interaction and electrostatic interaction of chemical with hair fiber.

Ex vivo skin permeation and penetration of nonivamide from and in vivo skin tolerability of film-forming formulations containing porous silica

AIM

The purpose of this study was to evaluate skin permeation and penetration of nonivamide which has been formulated in novel film-forming formulations (FFFs). These formulations aim to prolong the availability of capsaicinoids which are used in long-term treatment of chronic pruritus.

METHODS

An oily solution of nonivamide was loaded into porous silica particles which then were suspended in an aqueous dispersion of a sustained release polymer. Permeation and penetration experiments were performed ex vivo with postauricular porcine skin using modified Franz diffusion cells. The penetrated drug amount was assessed ex vivo by skin surface biopsy followed by cryo-sectioning. Furthermore, in vivo skin irritation experiments were performed to compare the potential skin irritation caused by the FFFs to conventionally used semi-solid formulations.

RESULTS

Permeation rates of nonivamide from FFF through the skin are comparable to that from clinically used immediate release formulations. This elucidates the therapeutic safety profile of the novel FFF. Penetration studies confirmed the prolonged drug availability at the site of action. FFFs were found not to irritate the skin of healthy volunteers.

CONCLUSION

FFFs with sustained nonivamide penetration represent safe and easy-to-use formulations. They therefore may improve the treatment of chronic pruritus with capsaicinoids by enhancing patient compliance through a sustained release regime.

A mechanistic approach to modelling the formation of a drug reservoir in the skin

It has been shown that prolonged systemic presence of a drug can cause a build-up of that drug in the skin. This drug 'reservoir', if properly understood, could provide useful information about recent drug-taking history of the patient. We create a pair of coupled mathematical models which combine to explore the potential for a drug reservoir to establish based on the kinetic properties of the drug. The first compartmental model is used to characterise time-dependent drug concentrations in plasma and tissue following a customisable drug regimen. Outputs from this model provide boundary conditions for the second, spatio-temporal model of drug build-up in the skin. We focus on drugs that are highly bound as this will restrict their potential to move freely into the skin but which are lipophilic so that, in the unbound form, they would demonstrate an affinity to the outer layers of the skin. Buprenorphine, a drug used to treat opiate addiction, is one example of a drug satisfying these properties. In the discussion we highlight how our study might be used to inform future experimental design and data collection to provide relevant parameter estimates for reservoir formation and its potential to contribute to enhanced drug monitoring techniques.

Vehicle effects on human stratum corneum absorption and skin penetration

This study evaluated the effects of three vehicles-ethanol (EtOH), isopropyl alcohol (IPA), and isopropyl myristate (IPM)-on stratum corneum (SC) absorption and diffusion of the [¹⁴C]-model compounds benzoic acid and butenafine hydrochloride to better understand the transport pathways of chemicals passing through and resident in SC. Following application of topical formulations to human dermatomed skin for 30 min, penetration flux was observed for 24 h post dosing, using an in vitro flow-through skin diffusion system. Skin absorption and penetration was compared to the chemical-SC (intact, delipidized, or SC lipid film) binding levels. A significant vehicle effect was observed for chemical skin penetration and SC absorption. IPA resulted in the greatest levels of intact SC/SC lipid absorption, skin penetration, and total skin absorption/penetration of benzoic acid, followed by IPM and EtOH, respectively. For intact SC absorption and total skin absorption/penetration of butenafine, the vehicle that demonstrated the highest level of sorption/penetration was EtOH, followed by IPA and IPM, respectively. The percent doses of butenafine that were absorbed in SC lipid film and penetrated through skin in 24 h were greatest for IPA, followed by EtOH and IPM, respectively. The vehicle effect was consistent between intact SC absorption and total chemical skin absorption and penetration, as well as SC lipid absorption and chemical penetration through skin, suggesting intercellular transport as a main pathway of skin penetration for model chemicals. These results suggest the potential to predict vehicle effects on skin permeability with simple SC absorption assays. As decontamination was applied 30 min after chemical exposure, significant vehicle effects on chemical SC partitioning and percutaneous penetration also suggest that skin decontamination efficiency is vehicle dependent, and an effective decontamination method should act on chemical solutes in the lipid domain.

A prodrug approach to enhance azelaic acid percutaneous availability

Azelaic acid is a dicarboxylic acid compound used in treatment of acne vulgaris. However, high concentration (ca 20%) is needed to guarantee the drug availability in the skin. The latter increases the incidence of side effects such as local irritation. The prodrug strategy to enhance azelaic acid diffusion through skin was not reported before. Thus, a lipophilic prodrug of azelaic acid (diethyl azelate [DEA]) was synthesized and investigated to improve percutaneous availability of azelaic acid, with a subsequent full physical, chemical, and biological characterization. Expectedly, DEA exhibited a significant increase in diffusion compared to azelaic acid through silicone membrane. In contrast, the diffusion results through human stratum corneum (SC) displayed weaker permeation for DEA with expected retention in the SC. Therefore, a desorption study of DEA from SC was conducted to examine the reservoir behavior in SC. Results showed an evidence of sustained release behavior of DEA from SC. Consequently, enhancement of keratolytic effect is expected due to azelaic acid produced from enzymatic conversion of DEA released from SC.

Antioxidant activity, lipophilicity and extractability of polyphenols from pig skin - development of analytical methods for skin permeation studies

Permeation of polyphenols through the stratum corneum barrier is a precondition for the protective action of polyphenols against oxidative skin damage. Prior to in vitro skin permeation experiments, we developed a method for the quantification of polyphenols in pig skin, including organic solvent extraction and HPLC analysis. Catechine hydrate, epigallocatechin gallate, trans-resveratrol, quercetin, rutin and protocatechuic acid were chosen for this study as representatives of phenolics with different lipophilicity and molecular weight. The antioxidative activities of polyphenols as well as their octanol-water partition coefficients at different pH values were determined. Extraction of polyphenols from pig skin was optimized by variation of solvent composition, homogenization intensity and time, as well as partial exclusion of oxygen during extraction. The highest recovery rates could be reached by extraction with the methanol-water mixture (90:10, v/v), containing 0.2 g/L l-ascorbic acid, after the cryo-milling for 4 min. Recoveries of 72% for total phenolics, 96% for quercetin and protocatechuic acid, 90% for rutin and 74% for trans-resveratrol, were achieved. These extraction parameters will be selected for the polyphenol extraction from pig skin for further in vitro drug permeation studies.