Oseltamivir Phosphate–Amberlite™ IRP 64 Ionic Complex for Taste Masking: Preparation and Chemometric Evaluation

Solid-State NMR Characterization of Mefloquine Resinate Complexes Designed for Taste-Masking Pediatric Formulations

Mefloquine (MQ) is an antimalarial medication prescribed to treat or malaria prevention.. When taken by children, vomiting usually occurs, and new doses of medication frequently need to be taken. So, developing pediatric medicines using taste-masked antimalarial drug complexes is mandatory for the success of mefloquine administration. The hypothesis that binding mefloquine to an ion-exchange resin (R) could circumvent the drug's bitter taste problem was proposed, and solid-state 13C cross-polarization magic angle spinning (CPMAS) NMR was able to follow MQ-R mixtures through chemical shift and relaxation measurements. The nature of MQ-R complex formation could then be determined. Impedimetric electronic tongue equipment also verified the resinate taste-masking efficiency in vitro. Variations in chemical shifts and structure dynamics measured by proton relaxation properties (e.g., T1ρH) were used as probes to follow the extension of mixing and specific interactions that would be present in MQ-R. A significant decrease in T1ρH values was observed for MQ carbons in MQ-R complexes, compared to the ones in MQ (from 100-200 ms in MQ to 20-50 ms in an MQ-R complex). The results evidenced that the cationic resin interacts strongly with mefloquine molecules in the formulation of a 1:1 ratio complex. Thus, 13C CPMAS NMR allowed the confirmation of the presence of a binding between mefloquine and polacrilin in the MQ-R formulation studied.

Evaluation of the bioavailability of a Tamiflu taste-masking pediatric formulation using a juvenile pig model and LC-MS/MS

Aim: To improve the palatability and increase compliance in pediatric patients, different taste-masking technologies have been evaluated to support the NIH Pediatric Formulation Initiative.Methods: This bioavailability approach combined a juvenile porcine model which represented the pediatric population, and an advanced UHPLCMS/MS method. Juvenile pigs were administered with either commercial Tamiflu or its taste-masking formulation and plasma samples were obtained from 0 to 48 h. The mass spectrometer was operated in positive mode with electrospray ionization.Results: The bioavailability profiles were not significantly different between the two formulations which demonstrated that taste-masking by forming an ionic complex was a promising approach for formulation modification.Conclusion: The pre-clinical study revealed a promising model platform for developing and screening taste-masking formulations.

Recent Advances in Bitterness-Sensing Systems

Bitterness is one of the basic tastes, and sensing bitterness plays a significant role in mammals recognizing toxic substances. The bitter taste of food and oral medicines may decrease consumer compliance. As a result, many efforts have been made to mask or decrease the bitterness in food and oral pharmaceutical products. The detection of bitterness is critical to evaluate how successful the taste-masking technology is, and many novel taste-sensing systems have been developed on the basis of various interaction mechanisms. In this review, we summarize the progress of bitterness response mechanisms and the development of novel sensors in detecting bitterness ranging from commercial electronic devices based on modified electrodes to micro-type sensors functionalized with taste cells, polymeric membranes, and other materials in the last two decades. The challenges and potential solutions to improve the taste sensor quality are also discussed.

Mesoporous Silica Carrier-Based Composites for Taste-Masking of Bitter Drug: Fabrication and Palatability Evaluation

Palatability is one of the most critical characteristics of oral preparations. Therefore, the exploration of new techniques to mask the aversive taste of drugs is in continuous demand. In this study, we fabricated and characterized composites based on mesoporous silica (MPS) that consisted of MPS, a bitter drug, and release regulators. We conducted a palatability evaluation to assess the taste-masking efficacy of the composites. The composites were prepared using the dry impregnation method combined with hot-melt extrusion. Morphology and components distribution in composites were characterized by scanning electron microscopy, confocal laser scanning microscopy, X-ray photoelectron spectroscopy, powder flow properties evaluation, and nitrogen-sorption measurement. The results demonstrated that drugs mainly existed in the inner pore of composites, and release regulators existed in the inner pore and covered the composites' surface. Interactions among the composite components were studied using powder X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy. The drug loaded into the composites was amorphous, and an intermolecular interaction occurred between the drug and the MPS. Taste-masked composites significantly reduced drug release levels under mouth conditions; thus, they prevented the interaction of the dissolved drug with taste receptors and improved palatability. An electronic tongue evaluation and a human taste panel assessment confirmed the better palatability of taste-masked composites. Moreover, the desired drug release behavior can be adjusted by choosing an appropriate release regulator, with stronger hydrophobicity of release regulators resulting in slower drug release. This work has provided new insights into taste-masking strategies for drugs with unpleasant tastes.

Investigation of Chloroquine Resinate Feasibility and In Vitro Taste Masking Evaluation for Pediatric Formulations

In this study, chloroquine resinates were prepared at a 1:1 (w:w) drug-to-resin ratio using the batch method with polacrilex (PC), sodium polystyrene sulfonate (SPS), and polacrilin potassium (PP) ion exchange resins (IER). The influence of drug/resin ratio and pH of the medium on drug loading efficiency was explored. UV-VIS spectrophotometric analysis showed that SPS resin had high loading efficiency for chloroquine diphosphate (CLP), above 89%, regardless of the pH. PP resin was more effective at pH 5.0 (90.68%) than at pH 1.0 (2.09%), and PC resin had only 27.63% of CLP loading efficiency. CLP complexation with IER yielded amorphous mixtures according to results from differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD), thus indicating drug-resin interaction. The taste masking efficiency was evaluated with in vitro methods using an adapted dissolution test and an electronic tongue system. During dissolution tests, SPS released only 1.0% of CLP after 300 s, while PP released over 10% after 90 s in simulated saliva solution. The electronic tongue distinguished the samples containing CLP, resins, and resinates by using multidimensional projection techniques that indicated an effective drug taste masking. In an accelerated stability study, the drug contents did not decrease in chloroquine resinates, and there was no physical degradation of the resinates after 60 days. Using chloroquine resinates therefore represents a novel way to evaluate taste masking in vitro which is relevant for the early formulation development process.

Behaviours of antiviral Oseltamivir in different media: DFT and SQMFF calculations

The synthetic cyclohexenecarboxylate ester antiviral Oseltamivir (O) have been theoretically studied by B3LYP/6–311 +  + G** calculations to estimate its reactivity and behaviour in gas and aqueous media. The most stable structure obtained in above media is consistent with that reported experimental for Oseltamivir phosphate. The solvation energy value of (O) in aqueous media is between the predicted for antiviral Idoxuridine and Ribavirin. Besides, (O) containing a NH₂ group and NH group reveals lower solvation energy compared with other antiviral agents with an NH₂ group, such as Ribavirin, Cidofovir, and Brincidofovir. Atomic charges on N and O atoms in acceptors and donor groups reveal different behaviours in both media, while the natural bond orbital (NBO) studies show a raised stability of (O) in aqueous solution. This latter resulted is in concordance with the lower reactivity evidenced in water. Frontier orbital studies have revealed that (O) in gas phase has a very similar gap value to antiviral Cidofovir used against the ebola disease, while Chloroquine in the two media are more reactive than (O). This study will allow to identify (O) by using vibrational spectroscopy because the 144 vibration modes expected have been assigned using the harmonic force fields calculated from the scaled mechanical force field methodology (SQMFF). Scaled force constants for (O) in the mentioned media are also reported for first time. Due to hydration of the C = O and NH₂ groups by solvent molecules, the calculations in solution produce variations not only in the IR wavenumbers bands, but also in their intensities.

Oseltamivir phosphate loaded pegylated-Eudragit nanoparticles for lung cancer therapy: Characterization, prolonged release, cytotoxicity profile, apoptosis pathways and in vivo anti-angiogenic effect by using CAM assay

The target of the current investigation was the delivery of oseltamivir phosphate (OSE) into the lung adenocarcinoma tissues by means of designing nanosized, non-toxic and biocompatible pegylated Eudragit based NPs and investigating their anticancer and antiangiogenic activity. The rationale for this strategy is to provide a novel perspective to cancer treatment with OSE loaded pegylated ERS NPs under favor of smaller particle size, biocompatible feature, cationic characteristic, examining their selective effectiveness on lung cell lines (A549 lung cancer cell line and CCD-19Lu normal cell line) and examining antiangiogenic activity by in vivo CAM analysis. For this purpose, OSE encapsulated pegylated ERS based NPs were developed and investigated for zeta potential, particle size, encapsulation efficiency, morphology, DSC, FT-IR, ¹H NMR analyses. In vitro release, cytotoxicity, determination apoptotic pathways and in vivo CAM assay were carried out. Considering characterizations, NPs showed smaller particle size, cationic zeta potential, relatively higher EE%, nearly spherical shape, amorphous matrix formation and prolonged release pattern (Peppas-Sahlin and Weibull model with Fickian and non-Fickian release mechanisms). Flow cytometry was used to assess the apoptotic pathways using the Annexin V-FITC/PI staining assay, FITC Active Caspase-3 staining assay, and mitochondrial membrane potential detection tests. Activations on caspase-3 pathways made us think that OSE loaded pegylated ERS NPs triggered to apoptosis using intrinsic pathway. As regards to the in vivo studies, OSE loaded pegylated ERS based NPs demonstrated strong and moderate antiangiogenic activity for ERS-OSE 2 and ERS-OSE 3, respectively. With its cationic character, smaller particle size, relative superior EE%, homogenous amorphous polymeric matrix constitution indicated using solid state tests, prolonged release manner, highly selective to the human lung adenocarcinoma cell lines, could trigger apoptosis intrinsically and effectively, possess good in vivo antiangiogenic activity, ERS-OSE 2 formulation is chosen as a promising candidate and a potent drug delivery system to treat lung cancer.

The use of electronic tongue and sensory panel on taste evaluation of pediatric medicines: a systematic review

The palatability of medications is an essential factor for children's adherence to drug treatment. Several methods for drug taste assessment have been developed. The aim of this review is to explore the literature reports of the main methods for the evaluation of medicines taste, named electronic tongue (e-tongue, in vitro) and human sensory panel. A systematic search was performed up to March 2020 and a total of 88 articles were selected. The e-tongue (57.5%) has been more frequently described than the sensory panel (10.3%), while some articles (32.2%) used both techniques. 74.7% of the articles mentioned 'pediatric', 'paediatric' or 'children' in the text, but only 19.5% developed formulations targeting pediatric audience and sensory testing in children is rarely seen. The e-tongue has predominance of use in the taste evaluation of pediatric medicines probably since it is fast, easy to perform and risk free, besides presenting less imprecise data and no fatigue. The human panel is more realistic, despite its intrinsic variability. In this sense, it is proposed the use of e-tongue as a fast way to select the most promising sample(s) and, after that, the sensory panel should be applied in order to confirm the taste masking.

Development and evaluation of orally disintegrating tablets containing the mosapride resin complex

The purpose of this study was to prepare a mosapride citrate-resin (Amberlite® IRP 88) complex and orally fast-disintegrating tablets of the resin complex. The resinate complex of mosapride-Amberlite® IRP 88, mass ratio 2:1, was prepared in an ethanol-water solution. The effects of alcohol concentration, temperature, and pH of the solution on complex formation were evaluated. The complex physicochemical properties were characterized by differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. Orally disintegrating tablets were prepared by direct compression and were optimized using the response surface method. Optimized orally fast-disintegrating tablets disintegrated within 18 s. The pH dependence of mosapride release from the tablet decreased drug dissolution in simulated saliva, whereas it promptly released in the pH 1.0 solution. The data reported herein clearly demonstrate that tablets containing the mosapride-Amberlite® IRP 88 complex for oral disintegration could be particularly useful for patients with swallowing difficulties.

Preparation and Evaluation of Taste Masking Iron Suspension: Taking Advantage of Weak Cationic Exchange Resin

The objective of this study is to use weak acid cation exchange resin to mask the taste and eliminate the teeth staining problems of ferrous sulfate liquid preparations for use in pediatrics. Amberlite IPR64 was loaded by Fe(II). Then, different suspensions of the iron-resin complex were prepared using various polymers as the suspending agents, and sorbitol as well as sucrose as sweeteners. Physical stability, rheological assessment, kinetics of Fe(II) release, and taste evaluation of suspensions were studied. The results implied that the prepared iron suspension was more stable when xanthan gum is used as the suspending agent. It was also shown that iron release in 0.7% NaCl (similar to saliva) was very negligible compared to relatively quick release in acidic medium (resembled the stomach). Overall, the volunteers confirmed that the formulations were successful in iron taste masking. The pH-dependent process of ion exchange by weak cationic resins opens an attractive approach to access a taste-masked iron suspension for infants.

Taste masking of ofloxacin and formation of interpenetrating polymer network beads for sustained release

The objective of this study was to carry out taste masking of ofloxacin (Ofl) by ion exchange resins (IERs) followed by sustained release of Ofl by forming interpenetrating polymer network (IPN) beads. Drug-resin complexes (DRCs) with three different ratios of Ofl to IERs (1:1, 1:2, 1:4) were prepared by batch method and investigated for in vivo and in vitro taste masking. DRC of methacrylic acid-divinyl benzene (MD) resin and Ofl prepared at a ratio of 1:4 was used to form IPN beads. IPN beads of MD 1:4 were prepared by following the ionic cross-linking method using sodium carboxymethyl xanthan gum (SCMXG) and SCMXG-sodium carboxymethyl cellulose (SCMXG-SCMC). IPN beads were characterized with FT-IR and further studied on sustained release of Ofl at different pH. In vivo taste masking carried out by human volunteers showed that MD 1:4 significantly reduced the bitterness of Ofl. Characterization studies such as FT-IR, DSC, P-XRD and taste masking showed that complex formation took place between drug and resin. In vitro study at gastric pH showed complete release of drug from MD 1:4 within 30 min whereas IPN beads took 5 h at gastric pH and 10 h at salivary pH for the complete release of drug. As the crosslinking increased the release kinetics changed into non-Fickian diffusion to zero-order release mechanism. MD 1:4 showed better performance for the taste masking of Ofl and IPNs beads prepared from it were found useful for the sustained release of Ofl at both the pH, indicating a versatile drug delivery system.

Development and in vivo evaluation of child-friendly lopinavir/ritonavir pediatric granules utilizing novel in situ self-assembly nanoparticles

The aim of this study was to develop a nanotechnology to formulate a fixed-dose combination of poorly water-soluble drugs in a children-friendly, flexible solid dosage form. For diseases like HIV, pediatric patients are taking multiple drugs for effective treatments. Fixed-dose combinations could reduce pill burdens and costs as well as improving patient adherence. However, development of fixed-dose combinations of poorly water-soluble drugs for pediatric formulations is very challenging. We discovered a novel nanotechnology that produced in situ self-assembly nanoparticles (ISNPs) when the ISNP granules were introduced to water. In this study, antiretroviral drug granules, including lopinavir (LPV) ISNP granules and a fixed-dose combination of LPV/ritonavir (RTV) ISNP granules, were prepared using the ISNP nanotechnology, which spontaneously produced drug-loaded ISNPs in contact with water. Drug-loaded ISNPs had particle size less than 158nm with mono-dispersed distribution, over 95% entrapment efficiency for both LPV and RTV and stability over 8h in simulated physiological conditions. Drug-loaded ISNP granules with about 16% of LPV and 4% of RTV were palatable and stable at room temperature over 6months. Furthermore, LPV/RTV ISNP granules displayed a 2.56-fold increase in bioavailability and significantly increased LPV concentrations in tested tissues, especially in HIV sanctuary sites, as compared to the commercial LPV/RTV tablet (Kaletra®) in rats. Overall, the results demonstrated that the novel ISNP nanotechnology is a promising platform to manufacture palatable, "heat" stable, and flexible pediatric granules for fixed-dose combinations that can be used as sachets and sprinkles. To the best of our knowledge, this is the first report on this kind of novel nanotechnology for pediatric fixed-dose combinations of poorly water-soluble drugs.

Development of taste masked caffeine citrate formulations utilizing hot melt extrusion technology and in vitro-in vivo evaluations

The objective of this study was to develop caffeine citrate orally disintegrating tablet (ODT) formulations utilizing hot-melt extrusion technology and evaluate the ability of the formulation composition to mask the unpleasant bitter taste of the drug using in vitro and in vivo methods. Ethylcellulose, along with a suitable plasticizer, was used as a polymeric carrier. Pore forming agents were incorporated into the extruded matrix to enhance drug release. A modified screw configuration was applied to improve the extrusion processability and to preserve the crystallinity of the API. The milled extrudates were subjected to dissolution testing in an artificial salivary fluid and investigations using e-tongue, to assess the extent of masking of bitter taste of the API. There was an insignificant amount of drug released from the formulation in the salivary medium while over 80% of drug released within 30 min in 0.1N HCl. ODTs were also developed with the extrudate mixed with mannitol and crospovidone. The quality properties such as friability and disintegration time of the ODTs met the USP specifications. The lead extrudate formulations and the ODTs prepared using this formulation were subjected to human gustatory evaluation. The formulations were found to mask the unpleasant taste of caffeine citrate significantly.