Deliquescence: Hygroscopicity of Water-Soluble Crystalline Solids

Optimizing Salt Leakage Mitigation and Comparing Sorption-Desorption Characteristics of Polyacrylamide-Based Hydrogels

Solid hygroscopic materials are extensively utilized in diverse fields, including adsorption heat transfer, adsorption heat storage, atmospheric water harvesting (AWH), and air conditioning dehumidification. The efficacy and energy efficiency of these materials in practical applications are significantly influenced by their adsorption and desorption properties. Yet, the introduction of inorganic salts to boost adsorption performance can result in issues like salt leakage. In this research, we prepared a polyacrylamide hydrogel through free radical polymerization, and its water-absorbing capabilities were improved by incorporating the hygroscopic salt lithium chloride. We compared it to a salt-based porous adsorbent, AlFum-LiCl, which also exhibited strong water adsorption properties and the potential for large-scale production. While AlFum-LiCl suffered from limited pores and salt leakage during high water uptake, the optimized PAM-LiCl displayed superior water sorption capabilities, showing no salt leakage even at water uptake of up to 3.5 g/g. At 25 °C, PAM-LiCl achieved equilibrium water uptake of 1.26 g/g at 30% RH and 3.15 g/g at 75% RH. In this context, utilizing 20 g of PAM-LiCl for the AWH experiment yielded daily water outputs of 8.34 L/kg at 30% RH and 16.86 L/kg at 75% RH. The salt-optimized PAM-LiCl hydrogel offers the benefit of application in higher relative humidity environments without the risk of deliquescence, underscoring its promise for atmospheric water harvesting.

A membrane-based seawater electrolyser for hydrogen generation

Electrochemical saline water electrolysis using renewable energy as input is a highly desirable and sustainable method for the mass production of green hydrogen^1-7; however, its practical viability is seriously challenged by insufficient durability because of the electrode side reactions and corrosion issues arising from the complex components of seawater. Although catalyst engineering using polyanion coatings to suppress corrosion by chloride ions or creating highly selective electrocatalysts has been extensively exploited with modest success, it is still far from satisfactory for practical applications^8-14. Indirect seawater splitting by using a pre-desalination process can avoid side-reaction and corrosion problems^15-21, but it requires additional energy input, making it economically less attractive. In addition, the independent bulky desalination system makes seawater electrolysis systems less flexible in terms of size. Here we propose a direct seawater electrolysis method for hydrogen production that radically addresses the side-reaction and corrosion problems. A demonstration system was stably operated at a current density of 250 milliamperes per square centimetre for over 3,200 hours under practical application conditions without failure. This strategy realizes efficient, size-flexible and scalable direct seawater electrolysis in a way similar to freshwater splitting without a notable increase in operation cost, and has high potential for practical application. Importantly, this configuration and mechanism promises further applications in simultaneous water-based effluent treatment and resource recovery and hydrogen generation in one step.

Scalable super hygroscopic polymer films for sustainable moisture harvesting in arid environments

Extracting ubiquitous atmospheric water is a sustainable strategy to enable decentralized access to safely managed water but remains challenging due to its limited daily water output at low relative humidity (≤30% RH). Here, we report super hygroscopic polymer films (SHPFs) composed of renewable biomasses and hygroscopic salt, exhibiting high water uptake of 0.64–0.96 g g⁻¹ at 15–30% RH. Konjac glucomannan facilitates the highly porous structures with enlarged air-polymer interfaces for active moisture capture and water vapor transport. Thermoresponsive hydroxypropyl cellulose enables phase transition at a low temperature to assist the release of collected water via hydrophobic interactions. With rapid sorption-desorption kinetics, SHPFs operate 14–24 cycles per day in arid environments, equivalent to a water yield of 5.8–13.3 L kg⁻¹. Synthesized via a simple casting method using sustainable raw materials, SHPFs highlight the potential for low-cost and scalable atmospheric water harvesting technology to mitigate the global water crisis.

Extracting atmospheric water is a sustainable strategy to enable decentralized access to safely managed water but remains impractical due to its limited daily water output at low relative humidity. Here, the authors demonstrate a hygroscopic polymer composed of renewable biomass which allows high water uptake at low relative humidity

Materials Engineering for Atmospheric Water Harvesting: Progress and Perspectives

Atmospheric water harvesting (AWH) is emerging as a promising strategy to produce fresh water from abundant airborne moisture to overcome the global clean water shortage. The ubiquitous moisture resources allow AWH to be free from geographical restrictions and potentially realize decentralized applications, making it a vital parallel or supplementary freshwater production approach to liquid water resource-based technologies. Recent advances in regulating chemical properties and micro/nanostructures of moisture-harvesting materials have demonstrated new possibilities to promote enhanced device performance and new understandings. This perspective aims to provide a timely overview on the state-of-the-art materials design and how they serve as the active components in AWH. First, the key processes of AWH, including vapor condensation, droplet nucleation, growth, and departure are outlined, and the desired material properties based on the fundamental mechanisms are discussed. Then, how tailoring materials-water interactions at the molecular level play a vital role in realizing high water uptake and low energy consumption is shown. Last, the challenges and outlook on further improving AWH from material designs and system engineering aspects are highlighted.

Fresh water production from atmospheric air: Technology and innovation outlook

Capturing water vapor from atmospheric air is a possible solution to local water scarcity, but it is very energy demanding. Energy consumption estimates of water-from-air technologies involving adsorption processes, thermo-responsive hydrophilicity switching polymers, air cooling processes, and reverse osmosis of deliquescent salt solutions reveal that these technologies are not competitive when compared with seawater desalination, and the use of fresh water and wastewater sources. They only become a viable option in the absence of local liquid water sources and when long-distance transport for socio-economic reasons is not an option. Of interest, direct solar-driven technology for water-from-air production is an attractive means to disentangle the local water-energy nexus. It is expected that climate change will accelerate the introduction of water-from-air technologies in local water supply schemes. The optimal water-from-air technology depends on the climate, relative humidity, and temperature profiles. A world map is presented, indicating the optimal geographic location for each technology.

Phase solubility diagrams and energy surface calculations support the solubility enhancement with low hygroscopicity of Bergenin: 4-Aminobenzamide (1: 1) cocrystal

Herein, we reported a new bergenin: 4-aminobenzamide (BGN-4AM) cocrystal with significantly enhanced solubility and low hygroscopicity probed from two aspects such as phase solubility diagrams and theoretical calculations. Compared with anhydrous BGN, BGN-4AM solubilities in water and different buffer solutions (pH = 1.2, 4.5, 6.8) increase significantly. It is noted that BGN-4AM solubility in pH = 6.8 buffer solution presents 32.7 times higher than anhydrous BGN. Interestingly, BGN-4AM (0.31 ± 0.07%) showcases lower hygroscopicity than anhydrous BGN (9.31 ± 0.16%). The predicted and experimental solubilities agree with each other when considering solubility product (K_sp) and solution binding constant (K₁₁) in phase solubility diagrams, indicating the solution complexes formation occurs. Further crystal surface-water interactions and Bravais, Friedel, Donnay-Harker (BFDH) analyses based on Density Functional Theory with dispersion correction (DFT-d) methods support the enhanced solubility. The water probe demonstrates an average interaction energy of -6.48 kcal/mol on the 002 plane of BGN-4AM, and only -5.47 kcal/mol on the 011 plane of BGN monohydrate. The lower lattice energy of BGN-4AM guarantees its lower hygroscopicity than BGN monohydrate. BGN-4AM with enhanced solubility and low hygroscopicity can be a potential candidate for further formulation development.

Fugitive Dust Suppression in Unpaved Roads: State of the Art Research Review

Fugitive dust is a serious threat to unpaved road users from a safety and health point of view. Dust suppressing materials or dust suppressants are often employed to lower the fugitive dust. Currently, many dust suppressants are commercially available and are being developed for various applications. The performance of these dust suppressants depends on their physical and chemical properties, application frequency and rates, soil type, wind speed, atmospheric conditions, etc. This article presents a comprehensive review of various available and in-development dust suppression materials and their dust suppression mechanisms. Specifically, the dust suppressants that lower the fugitive dust either through hygroscopicity (ability to absorb atmospheric moisture) and/or agglomeration (ability to cement the dust particles) are reviewed. The literature findings, recommendations, and limitations pertaining to dust suppression on unpaved roads are discussed at the end of the review.

Adsorption Capacities of Hygroscopic Materials Based on NaCl-TiO2 and NaCl-SiO2 Core/Shell Particles

Hygroscopic materials which possess high moisture adsorption capacity were successfully upgraded by the functionalization of sodium chloride (NaCl) using two nuances of oxides. A procedure was developed to first prepare submicron-sized NaCl crystals; thereafter, these crystals were coated by choice of either titanium dioxide (TiO2) or silica (SiO2) to enhance the hygroscopic properties of NaCl and prevent its premature deliquescence. After coating, several analytical techniques were employed to evaluate the obtained composite materials. Our findings revealed that both composites NaCl-TiO2 and NaCl-SiO2 gave excellent performances by exhibiting interesting hydrophilic properties, compared to the sole NaCl. This was demonstrated by both environmental scanning electron microscope (ESEM) and water vapor adsorption experiments. In particular, NaCl-TiO2 composite showed the highest water adsorption capacity at low relative humidity and at a faster adsorption rate, induced by the high surface energy owing to the presence of TiO2. This result was also confirmed by the kinetics of adsorption, which revealed that not only does NaCl-TiO2 adsorb more water vapor than NaCl-SiO2 or sole NaCl but also the adsorption occurred at a much higher rate. While at room temperature and high relative humidity, the NaCl-SiO2 composite showed the best adsorption properties making it ideal to be used as a hygroscopic material, showing maximum adsorption performance compared to NaCl-TiO2 or sole NaCl. Therefore, NaCl-TiO2 and NaCl-SiO2 composites could be considered as promising hygroscopic materials and potential candidates to replace the existing salt seeding agents.

Core/Shell Microstructure Induced Synergistic Effect for Efficient Water-Droplet Formation and Cloud-Seeding Application

Cloud-seeding materials as a promising water-augmentation technology have drawn more attention recently. We designed and synthesized a type of core/shell NaCl/TiO₂ (CSNT) particle with controlled particle size, which successfully adsorbed more water vapor (∼295 times at low relative humidity, 20% RH) than that of pure NaCl, deliquesced at a lower environmental RH of 62-66% than the hygroscopic point (h_g.p., 75% RH) of NaCl, and formed larger water droplets ∼6-10 times its original measured size area, whereas the pure NaCl still remained as a crystal at the same conditions. The enhanced performance was attributed to the synergistic effect of the hydrophilic TiO₂ shell and hygroscopic NaCl core microstructure, which attracted a large amount of water vapor and turned it into a liquid faster. Moreover, the critical particle size of the CSNT particles (0.4-10 μm) as cloud-seeding materials was predicted via the classical Kelvin equation based on their surface hydrophilicity. Finally, the benefits of CSNT particles for cloud-seeding applications were determined visually through in situ observation under an environmental scanning electron microscope on the microscale and cloud chamber experiments on the macroscale, respectively. These excellent and consistent performances positively confirmed that CSNT particles could be promising cloud-seeding materials.

Pharmaceutical cocrystals, salts and polymorphs: Advanced characterization techniques

The main goal of a novel drug development is to obtain it with optimal physiochemical, pharmaceutical and biological properties. Pharmaceutical companies and scientists modify active pharmaceutical ingredients (APIs), which often are cocrystals, salts or carefully selected polymorphs, to improve the properties of a parent drug. To find the best form of a drug, various advanced characterization methods should be used. In this review, we have described such analytical methods, dedicated to solid drug forms. Thus, diffraction, spectroscopic, thermal and also pharmaceutical characterization methods are discussed. They all are necessary to study a solid API in its intrinsic complexity from bulk down to the molecular level, gain information on its structure, properties, purity and possible transformations, and make the characterization efficient, comprehensive and complete. Furthermore, these methods can be used to monitor and investigate physical processes, involved in the drug development, in situ and in real time. The main aim of this paper is to gather information on the current advancements in the analytical methods and highlight their pharmaceutical relevance.