Electrochemically controlled solid phase microextraction based on a conductive polyaniline-graphene oxide nanocomposite for extraction of tetracyclines in milk and water

Recent progress in lanthanide-based fluorescent nanomaterials for tetracycline detection and removal

Tetracycline (TC) has been widely used in clinical medicine and animal growth promotion due to its broad-spectrum antibacterial properties and affordable prices. Unfortunately, the high toxicity and difficult degradation rate of TC molecules make them easy to accumulate in the environment, which breaks the ecological balance and seriously threatens human health. Rapid and accurate detection of TC residue levels is important for ensuring water quality and food safety. Recently, fluorescence detection technology of TC residues has developed rapidly. Lanthanide nanomaterials, based on the high luminescence properties of lanthanide ions and the high matching with TC energy levels, are favored in the real-time trace detection of TC due to their advantages of high sensitivity, rapidity, and high selectivity. Therefore, they are considered potential substitutes for traditional detection methods. This review summarizes the synthesis strategy, TC response mechanism, removal mechanism, and applications in intelligent sensing. Finally, the development of lanthanide nanomaterials for TC fluorescence detection and removal is reasonably summarized and prospected. This review provides a reference for the establishment of a method for the accurate determination of TC content in complex food matrices.

Fabrication of MXene/chitosan/polyurea nanocomposite decorated on a graphenized substrate for electro-enhanced solid-phase microextraction of diclofenac followed by its determination using differential pulse voltammetry

A novel solid-phase microextraction fiber based on MXene-chitosan-polyurea (MXene/CS/EPPU) nanocomposite decorated on a graphenized pencil lead fiber (MXene/CS/EPPU/GPLF) was prepared and utilized for electro-enhanced solid-phase microextraction (EE-SPME) of diclofenac (DCF) in biological samples. After extraction and desorption of DCF, it was determined by differential pulse voltammetry (DPV). For this purpose, the working electrode was prepared by deposition of the mentioned MXene/CS/EPPU nanocomposite onto the graphenized pencil lead. The synthesized SPME fiber was characterized using scanning electron microscopy and X-ray diffraction techniques. The effect of various parameters influencing the extraction and the desorption process were investigated, including applied voltage in the extraction and desorption steps, extraction and desorption times, and pH. The developed method exhibited a rather wide linearity in the range 2-1200 ng mL-1 (R2 = 0.985) for the determination of DCF in plasma samples. The limit of detection and the limit of quantification for plasma samples were estimated to be 0.58 and 1.9 ng mL-1 based on the 3Sb/m and 10Sb/m definitions, respectively. The method's accuracy and applicability have been evaluated by the analysis of plasma samples, leading to the relative recoveries in the range 87.0% and 98.0% with the relative standard deviations lower than 3.1%.

Advances in two-dimensional engineered nanomaterials applications for the agro- and food-industries

Two-dimensional nanomaterials, such as graphene, transition metal dichalcogenides, MXenes, and other layered compounds, are the subject of intense theoretical and experimental research for applications in a wide range of advanced technological solutions, given their outstanding physical, chemical, and mechanical properties. In the context of food science and technology, their contributions are starting to appear, based on the advantages that two-dimensional nanostructures offer to agricultural- and food-related key topics, such as sustainable water use, nano-agrochemicals, novel nanosensing devices, and smart packaging technologies. These application categories facilitate the grasping of the current and potential uses of such advanced nanomaterials in the field, backed by their advantageous physical, chemical, and structural properties. Developments for water cleaning and reuse, efficient nanofertilizers and pesticides, ultrasensitive sensors for food contamination, and intelligent nanoelectronic disposable food packages are among the most promising application examples reviewed here and demonstrate the tremendous impact that further developments would have in the area as the fundamental and applied research of two-dimensional nanostructures continues. We expect this work will contribute to a better understanding of the promising characteristics of two-dimensional nanomaterials that could be used for the design of novel and feasible solutions in the agriculture and food areas. © 2023 Society of Chemical Industry.

Polyaniline and Polyaniline-Based Materials as Sorbents in Solid-Phase Extraction Techniques

Polyaniline (PANI) is one of the best known and widely studied conducting polymers with multiple applications and unique physicochemical properties. Due to its porous structure and relatively high surface area as well as the affinity toward many analytes related to the ability to establish different types of interactions, PANI has a great potential as a sorbent in sample pretreatment before instrumental analyses. This study provides an overview of the applications of polyaniline and polyaniline composites as sorbents in sample preparation techniques based on solid-phase extraction, including conventional solid-phase extraction (SPE) and its modifications, solid-phase microextraction (SPME), dispersive solid-phase extraction (dSPE), magnetic solid-phase extraction (MSPE) and stir-bar sorptive extraction (SBSE). The utility of PANI-based sorbents in chromatography was also summarized. It has been shown that polyaniline is willingly combined with other components and PANI-based materials may be formed in a variety of shapes. Polyaniline alone and PANI-based composites were successfully applied for sample preparation before determination of various analytes, both metal ions and organic compounds, in different matrices such as environmental samples, food, human plasma, urine, and blood.

Emerging Applications of Versatile Polyaniline-Based Polymers in the Food Industry

Intrinsically conducting polymers (ICPs) have been widely studied in various applications, such as sensors, tissue engineering, drug delivery, and semiconductors. Specifically, polyaniline (PANI) stands out in food industry applications due to its advantageous reversible redox properties, electrical conductivity, and simple modification. The rising concerns about food safety and security have encouraged the development of PANI as an antioxidant, antimicrobial agent, food freshness indicator, and electronic nose. At the same time, it plays an important role in food safety control to ensure the quality of food. This study reviews the emerging applications of PANI in the food industry. It has been found that the versatile applications of PANI allow the advancement of modern active and intelligent food packaging and better food quality monitoring systems.

Selective capture and determination of doxycycline in marine sediments by using magnetic imprinting dispersive solid-phase extraction coupled with high performance liquid chromatography

Antibiotics are frequently used in aquaculture as feed additives and finally enter the marine environment that can pose potential threat to humans. In this study, magnetic molecularly imprinted nanocomposites were prepared by surface imprinting and applied as selective sorbents for specific capture of doxycycline. A multivariate approach based on response surface methodology with Box-Behnken design was adopted to optimize the dispersive solid-phase extraction of doxycycline from marine sediment. Three key parameters, including adsorbent amount and type of washing/eluting solvent, were screened. Under optimum conditions, the limit of detection was 0.03 μg g^-1 with good linearity from 0.5 to 20 μg g^-1 followed by HPLC detection. Finally, two sediment samples were analysed and satisfactory recoveries between 90.60 % and 93.76 % were obtained with acceptable relative standard deviations (≤4.12 %), suggesting a promising applicability of the developed method for efficient extraction and sensitive quantification of antibiotics in complex marine environmental matrix.

Polymer based nanocomposites: A strategic tool for detection of toxic pollutants in environmental matrices

A large fraction of population is suffering from waterborne diseases due to the contaminated drinking water. Both anthropogenic and natural sources are responsible for water contamination. Revolution in industrial and agriculture sectors along with a huge increase in human population has brought more amount of wastes like heavy metals, pesticides and antibiotics. These toxins are very harmful for human health, therefore, it is necessary to sense their presence in environment. Conventional strategies face various problems in detection and quantification of these pollutants such as expensive equipment and requirement of high maintenance with limited portability. Recently, nanostructured devices have been developed to detect environmental pollutants. Polymeric nanocomposites have been found robust, cost effective, highly efficient and accurate for sensing various environmental pollutants and this is due to their porous framework, multi-functionalities, redox properties, great conductivity, catalytic features, facile operation at room temperature and large surface area. Synergistic effects between polymeric matrix and nanomaterials are responsible for improved sensing features and environmental adaptability. This review focuses on the recent advancement in polymeric nanocomposites for sensing heavy metals, pesticides and antibiotics. The advantages, disadvantages, operating conditions and future perspectives of polymeric nanocomposites for sensing toxic pollutants have also been discussed.

Green vortex-assisted emulsification microextraction using a ternary deep eutectic solvent for extraction of tetracyclines in infant formulas

A novel green alternative vortex-assisted emulsification liquid-liquid microextraction based on a new hydrophobic deep eutectic solvent (DES) was developed to extract tetracyclines in infant formulas. Five new ternary DESs were synthesized and tested in this regard. Among them [thymol]:[ethylene glycol]:[benzyl alcohol] (2:2:1) DES demonstrated the highest extraction efficiency. The analyzes were performed by HPLC. The DES was characterized by attenuated total reflectance-FTIR, nuclear magnetic resonance spectroscopy, and octanol-water partition coefficient. The effect of type, mole ratio, and volume of DES, dispersing agent, pH, and ionic strength was studied. The limits of quantification and linear range were 3-9.32 and 3-500 μg kg^-1, respectively. The method was applied to detect tetracyclines in infant formulas, and the recoveries were obtained as 68.9-102.0 % with relative standard deviations < 9 %. The procedure greenness was assessed using the Analytical Eco-Scale. This paper represents the first application of a novel ternary DES to analyze tetracyclines in infant formulas.

Contrasted effects of Metaphire guillelmi on tetracycline diffusion and dissipation in soil

Earthworms are important in soil bioremediation because of their capability of pollutant degradation. However, the trade-off between pollutant dissemination and degradation arising from earthworm activities remains unclear, as well as the potential biodegradation mechanism. Herein, an earthworm avoidance experiment was established to investigate Metaphire guillelmi-mediated tetracycline (TC) diffusion and degradation. The results showed that above 1600 mg kg^-1 TC pollution in soil induced avoidance behaviour of earthworms (p < 0.05), below which the random worm behaviour accelerated TC diffusion by 8.2% at most (p < 0.05), resulting in elevated levels of antibiotic-resistant bacteria and genes in the soil. Nevertheless, earthworms enhanced TC degradation regardless of whether their avoidance behaviour occurred (14.6-25.8%, p < 0.05). Compared with in soil, metabolic pathways affiliated with xenobiotic degradation and metabolism in the intestines were enriched (LDA >3). Given the abundant glutathione S-transferases in the intestines and their close relationship with Δ degradation, they may play a key role in intestinal TC biodegradation. In general, earthworms had good tolerance to soil TC contamination and their impact on promoting TC degradation outweighed that accelerating TC diffusion. This work provides a comprehensive view of earthworms as a potential remediation method for TC-contaminated soil.

Conductive Polymer-Based Nanocomposites as Powerful Sorbents: Design, Preparation and Extraction Applications

Conductive polymers as composite materials have been attracted tremendous attention due to their versatile and excellent features such as tunable conductivity, facile synthesis and fabrication, high chemical and thermal stability etc. These characteristics make them versatile and let them being used in numerous fields including microelectronics, optics and biosensors. Throughout the mentioned fields, conductive polymers particularly perform as effective sorbents. Although tremendous efforts have been put into this topic, to the best of our knowledge, a comprehensive up-to-date review on the applications of conductive polymers as efficient sorbents has not been reported. The main objective of this paper is to make a significant contribution to the recent literature toward the synthesis and extraction applications of conductive polymers as efficient sorbents.

Highly effective pre-concentration of thymol and carvacrol using nano-sized magnetic molecularly imprinted polymer based on experimental design optimization and their trace determination in summer savoury, Origanum majorana and Origanum vulgare extracts

To ascertain thymol and carvacrol in pharmaceutical syrups, a valid and effective magnetic molecular imprinted polymer dispersive solid phase microextraction (MMIP-DSPME) process was developed in this study, which was in combination with a high performance liquid chromatography-ultra violet (HPLC-UV) technique for the assessment of thymol and carvacrol separation and pre-concentration. Contact time, eluent kind and volume, pH, the mass of the MMIP were all taken into consideration as key factors. Design expert and multi-objective response surface methodology (RSM) were used to optimize these variables. The mass of the MMIP, sample pH, eluent kind, time of sorption, the volume of eluent, and time of elution were 10 mg, 6, acetonitrile, 28 min, 200 µL, and 5.5 min, respectively, for the maximum extraction recovery of the analytes. The limit of detection (LOD) was 0.042 ng mL^-1 at the optimal conditions, while the value for the limit of quantification (LOQ) was 0.140 ng mL^-1. At the optimized conditions for thymol and carvacrol, the suggested MMIP sorbent had sorption capacities of 64.1 and 72.6 mg g^-1, respectively. Furthermore, for triplicate measurements, the linear dynamic range (LDR) was 0.40-5000 ng mL^-1, and the method's accuracy (RSD %) was 6.26%. The saturation magnetization for the MMIP was 19.0 emu g^-1 obtained by VSM, allowing the sorbent to be separated quickly. The sorption experiments confirmed the large sorption capacity of the MMIP for thymol and carvacrol, as well as its homogeneous binding sites. The extraction recovery for thymol and carvacrol was 96.9-103.8% and 96.6-105.4%, respectively, at all spiked amounts (20, 100, 200, and 500 ng mL^-1). The findings of seven desorption-regeneration cycles using MMIP demonstrated the high stability of the sorbent. The MMIP revealed a particular behavior of sorption for thymol and carvacrol, implying a selective, simple, effective, and flexible analytical method.

Natural thymol-based ternary deep eutectic solvents: Application in air-bubble assisted-dispersive liquid-liquid microextraction for the analysis of tetracyclines in water

Four new thymol-based ternary deep eutectic solvents were prepared and evaluated as the extractive phase in air-bubbles assisted dispersive liquid-liquid microextraction for extraction of tetracycline, doxycycline, and oxytetracycline from the water before high-performance liquid chromatography. The maximum extraction efficiencies were obtained using 400 μL of [choline chloride]:[thymol]:[nonanoic acid] in the molar ratio of 1:2:2 at pH = 5. The solvent was characterized by FTIR and NMR spectroscopy. The hydrophobicity of the deep eutectic solvent and its effect on the pH of water samples after mixing was also studied. Besides, the extraction efficiency of the ternary deep eutectic solvent was compared with that of two binary thymol-based deep eutectic solvents, including [choline chloride]:[thymol] and [thymol]:[nonanoic acid] at the same conditions. Under optimal conditions, limits of detection and quantification were 1.2-8.0 and 3.8-26.6 μg/L, respectively. The linear ranges were 18.2-500 μg/L for oxytetracycline, 26.6-500 μg/L for tetracycline, and 3.8-500 μg/L for doxycycline with the determination coefficients > 0.9912. Intra- and inter-day relative standard deviations were 1.2-3.8 and 7.7-11.2%, respectively. The developed method was applied to the analysis of tetracyclines in unspiked and spiked environmental water samples, and the obtained recoveries were 74.5-95.4% with relative standard deviations of 1.2-4.0%.

Mechanical power driven SPME-SERS ultra-fast detection of illegal additives in aquaculture water

A dual-function (extraction and detection) porous silver fiber with high enhancement effect was constructed based on a convenient electrochemical etching method. The prepared silver fiber not only had high enrichment capacity and good Surface Enhanced Raman Spectroscopy (SERS) performance but also had good laser stability and uniformity. A strategy combining mechanical power and integration of solid phase extraction (SPME) and SERS detection was used. Driven by mechanical power, the analyte malachite green (MG) was enriched on the prepared silver fiber after 40 seconds, which can realize an ultra-fast and sensitive detection with a detection limit of 8.48 × 10-9 M. At the same time, this fiber can be regenerated after being treated with NaBH4. The silver fiber can be used for the detection of MG and CV after being immersed in NaBH4 solution for a few minutes. After 5 cycles of processing, the measurement signals of the silver fiber can reach 70% of the initial signals. The mechanical power driven SPME-SERS (MPD-SPME-SERS) integrated detection method can be used to analyse aquaculture water within 1 minute with a good linear relationship.