Recent development of monolithic materials as matrices in microcolumn separation systems

Thiol-radical-mediated polymerization for preparation of POSS-containing polyacrylate monoliths in capillary liquid chromatography

Through introducing octakis (3-mercaptopropyl) octasilsesquioxane (POSS-SH) synthesized in our lab to the prepolymerization solution containing stearyl acrylate (SA), 1,6-hexanediol ethoxylate diacrylate (HEDA) in the existence of porogenic solvents (tetrahydrofuran, 1,4-butanediol and 1-propanol), a POSS-containing hybrid monolithic column was fabricated via photo-initiated thiol-acrylate polymerization within 7 min. The resulting poly(SA-co-HEDA-co-POSS) monoliths were investigated by physical characterization and chromatographic evaluation. It was found that both the additive amount of thiol group and the proportion of porogenic solvents played vital effect on column efficiency, pore morphology and hydrophobicity of monolithic columns. Consequently, the poly(SA-co-HEDA-co-POSS) monolith possessed superior thermal stability, suitable permeability and homogeneous microstructure. The highest column efficiency was ∼111,000 N m^-1 for butylbenzene at the linear velocity of 0.71 mm s^-1 in reversed-phase liquid chromatography. Subsequently, baseline separations of 9 phenolic compounds, 5 anilines and 5 antibiotics were achieved, indicating the monolithic poly(SA-co-HEDA-co-POSS) column had great ability for separation of small molecules. The analytic results of the tryptic digest of BSA and HeLa were also proved that the hybrid monolith had potential for the analysis of complicated biological samples.

Separation and identification of oligomeric ethyl silicates by liquid chromatography with electrospray ionization mass spectrometry

Reversed-phase liquid chromatography coupled with electrospray ionization mass spectrometry was used to study the molecular structures of components and molar mass distributions in ethyl silicate-40, a versatile liquid precursor for silicon-based materials. Identity testing by standard spectroscopic techniques showed that a commercial sample of ethyl silicate-40 was composed of linear/branched ethoxysiloxane oligomers with the silicon atoms ranging from 2 to 12 together with minor monocyclic species. Analysis of the sample by liquid chromatography coupled with evaporative light scattering detection resulted in an elution profile consisting of a series of peak clusters. Peak identification showed that the linear/branched homologous series of oligomers were eluted in the order of increasing number of silicon atoms in the molecules and the time duration (width) of the resulting peak clusters increased in the same fashion corresponding to increasing number of geometric isomers. In addition, small amounts of monocyclic oligomers present in the sample were found to be less retained than each linear/branched counterpart. Finally, the molar mass distribution parameters for ethyl silicate-40 determined by the developed method were in good agreement with the literature values. Overall, this work demonstrates that reversed-phase liquid chromatography coupled with electrospray ionization mass spectrometry is an indispensable tool for the comprehensive characterization of complex mixtures of this type.

Effective and reusable monolith capillary trap of nitrosamine extraction by superheated water from frankfurter sausage

A novel, simple, rapid, and inexpensive method of extraction and cleanup of nitrosamines from frankfurter sausage was achieved with a capillary filled with monolith of either polystyrene-co-divinylbenzene (PS-DVB), Polydivinylbenzene (P-DVB), or silica that had been fabricated. The study of capability in trapping nonpolar matrix and monolith capillaries with varied lengths revealed that a silica monolith gave the best result for nitrosamine determination. With an online coupling between superheated water extraction (SWE) and silica monolith capillary connected to a 5% phenyl-methylpolysiloxane column, factors affecting the extraction and determination, namely, sensitivity with and without the monolith, reusability, injection-injection repeatability, capillary-capillary precision, and chromatographic separation, were investigated. This confirmed the feasibility of the method. The optimal length of silica monolith capillary was 30 mm, offering reuse more than 20 times. Separation and quantification of selected volatile nitrosamines were carried out using gas chromatography (GC) coupled with either a flame ionization detector (FID) or mass spectrometer (MS). The overall extraction and determination method determined by GC-MS allowed for a recovery of 75-88% with a <5% relative standard deviation (RSD) and detection limit of 2-5 ng of injected nitrosamine.

Parameters Governing the Formation of Photopolymerized Silica Sol-Gel Monoliths in PDMS Microfluidic Chips

Although polydimethylsiloxane (PDMS) microfluidic chips provide an alternative to more expensive microfabricated glass chips, formation of monolithic stationary phases in PDMS is not a trivial task. Photopolymerized silica sol-gel monoliths were fabricated in PDMS based microfluidic devices using 3-trimethoxysilylpropylmethacrylate (MPTMOS) and glycidyloxypropyltrimethoxysilane (GPTMOS). The monolith formation was optimized by identifying a suitable porogen, controlling monomer concentration, functional additives, salts, porogen, wall attachment methods, and rinsing procedures. The resulting monoliths were evaluated using scanning electron microscopy, image analysis, differential scanning calorimetry, and separation performance. Monoliths functionalized with boronic acid ligands were used for the separation of cis-diol containing compounds both in batch mode and in the microfluidic chip.

Integrated capillary zone electrophoresis-electrospray ionization tandem mass spectrometry system with an immobilized trypsin microreactor for online digestion and analysis of picogram amounts of RAW 264.7 cell lysate

A capillary zone electrophoresis (CZE) electrospray ionization (ESI) tandem mass spectrometry (MS/MS) system was integrated with an immobilized trypsin microreactor. The system was evaluated and then applied for online digestion and analysis of picogram loadings of RAW 264.7 cell lysate. Protein samples were dissolved in a buffer containing 50% (v/v) acetonitrile (ACN), and then directly loaded into the capillary for digestion, followed by CZE separation and MS/MS identification. The organic solvent (50% (v/v) ACN) assisted the immobilized trypsin digestion and simplified the protein sample preparation protocol. Neither protein reduction nor alkylation steps were employed, which minimized sample loss and contamination. The integrated CZE-ESI-MS/MS system generated confident identification of bovine serum albumin (BSA) with 19% sequence coverage and 14 peptide identifications (IDs) when 20 fmol was loaded. When only 1 fmol of BSA was injected, one BSA peptide was consistently detected. For the analysis of a standard protein mixture, the integrated system produced efficient protein digestion and confident identification for proteins with different molecular weights and isoelectric points when a low-femtomole amount was loaded for each protein. We further applied the system for triplicate analysis of a RAW 264.7 cell lysate; 2 ± 1 and 7 ± 2 protein groups were confidently identified from only 300 pg and 3 ng loadings, respectively. The 300 pg sample loading corresponds to the protein content of three RAW 264.7 cells. In addition to high-sensitivity analysis, the integrated CZE-ESI-MS/MS system produces good reproducibility in terms of peptide and protein IDs, peptide migration time, and peptide intensity.

Recent advances in preparation and application of hybrid organic-silica monolithic capillary columns

Hybrid organic-silica monolithic columns, regarded as a second generation of silica-based monoliths, have received much interest due to their unique properties over the pure silica-based monoliths. This review mainly focuses on development in the fields of preparation of hybrid monolithic columns in a capillary and their application for CEC and capillary liquid chromatography separation, as well as for sample pretreatment of solid-phase microextraction and immobilized enzyme reactor since July 2010. The preparation approaches are comprehensively summarized with three routes: (i) general sol-gel process using trialkoxysilanes and tetraalkoxysilanes as coprecursors; (ii) "one-pot" process of alkoxysilanes and organic monomers concomitantly proceeding sol-gel chemistry and free radical polymerization; and (iii) other polymerization approaches of organic monomers containing silanes. The modification of hybrid monoliths containing reactive groups to acquire the desired surface functionality is also described.

Multifunctional nanoparticles composite for MALDI-MS: Cd2+-doped carbon nanotubes with CdS nanoparticles as the matrix, preconcentrating and accelerating probes of microwave enzymatic digestion of peptides and proteins for direct MALDI-MS analysis

For the first time, we utilized multifunctional nanoparticles composite (NPs composite) for matrix-assisted laser desorption/ionization mass spectrometric (MALDI-MS) analysis of peptides and proteins. Multiwalled carbon nanotubes doped with Cd(2+) ions and modified with cadmium sulfide NPs were synthesized by a chemical reduction method at room temperature. The multifunctional NPs composite applied for the analysis of peptides and microwave-digested proteins in the atmospheric pressure matrix-assisted laser desorption/ionization ion-trap and MALDI time-of-flight (TOF) mass spectrometry (MS) was successfully demonstrated. The maximum detection sensitivity for peptides in MALDI-MS was achieved by the adsorption of negatively charged peptides onto the surfaces of NP composite through electrostatic interactions. The optimal conditions of peptide mixtures were obtained at 20 min of incubation time using 1 mg of NPs composite when the pH of the sample solution was kept higher than the pI values of peptides. The potentiality of the NP composite in the preconcentration of peptides was compared with that of the individual NP by calculating the preconcentration factors (PF) and found that the NPs composite showed a 4-6 times of PF than the other NPs. In addition, the NPs composite was also applied as heat-absorbing materials for efficient microwave tryptic digestion of cytochrome c and lysozyme from milk protein in MALDI-TOF-MS analysis. We believe that the use of NPs composite technique would be an efficient and powerful preconcentrating tool for MALDI-MS for the study of proteome research.

CEC-atmospheric pressure ionization MS of pesticides using a surfactant-bound monolithic column

A surfactant bound poly (11-acrylaminoundecanoic acid-ethylene dimethacrylate) monolithic column was simply prepared by in situ co-polymerization of 11-acrylaminoundecanoic acid and ethylene dimethacrylate with 1-propanol, 1,4-butanediol and water as porogens in 100 microm id fused-silica capillary in one step. This column was used in CEC-atmospheric pressure photoionization (APPI)-MS system for separation and detection of N-methylcarbamates pesticides. Numerous parameters are optimized for CEC-APPI-MS. After evaluation of the mobile phase composition, sheath liquid composition and the monolithic capillary outlet position, a fractional factorial design was selected as a screening procedure to identify factors of ionization source parameters, such as sheath liquid flow rate, drying gas flow rate, drying gas temperature, nebulizing gas pressure, vaporizer temperature and capillary voltage, which significantly influence APPI-MS sensitivity. A face-centered central composite design was further utilized to optimize the most significant parameters and predict the best sensitivity. Under optimized conditions, S/Ns around 78 were achieved for an injection of 100 ng/mL of each pesticide. Finally, this CEC-APPI-MS method was successfully applied to the analysis of nine N-methylcarbamates in spiked apple juice sample after solid phase extraction with recoveries in the range of 65-109%.

Recent advances in proteolysis and peptide/protein separation by chromatographic strategies

This review gives a broad glance on the progress of recent advances on proteolysis and peptide/protein separation by chromatographic strategies in the past ten years, covering the main research in these areas especially in China. The reviewed research focused on enzymatic micro-reactors and peptide separation in bottom-up approaches, and protein and peptide separation in top-down approaches. The new enzymatic micro-reactor is able to accelerate proteolytic reaction rate from conventionally a couple of hours to a few seconds, and the multiple dimensional chromatographic-separation with various models or arrays could sufficiently separate the proteomic mixture. These advances have significantly promoted the research of protein/peptide separation and identification in proteomics.

CEC of phytochemical bioactive compounds

Although there are many publications related to technological or methodological developments of CEC, few focus on the analysis of natural products, especially phytochemical bioactive compounds. This review summarized the application of CEC in the analysis of phytochemical bioactive components, including flavonoids, nucleosides, steroids, lignans, quinones and coumarins, as well as fingerprint analysis of herbs. The strategies for optimization of CEC conditions and detection were also discussed.

CEC: selected developments that caught my eye since the year 2000

During the last decade, a number of new developments have emerged in the field of CEC. This paper focuses only on monolithic columns prepared from synthetic polymers. Monolithic columns have become a well-established format of stationary phases for CEC immediately after their inception in the mid-1990s. They are readily prepared in situ from liquid precursors. Also, the control over both porous properties and surface chemistries is easy to achieve. These advantages make the monolithic separation media an attractive alternative to capillary columns packed with particulate materials. Since the number of papers concerned with just this single topic of polymer-based monolithic CEC columns is large, this overview describes only those approaches this author found interesting.

Restricted-access media supports for direct high-throughput analysis of biological fluid samples: review of recent applications

This review presents an update on the use of restricted-access materials (RAMs) for direct injection of biological samples. The fundamental improvements in the preparation of tailored RAMs and the diversity of applications with these phases are presented. Insights into diminishing the matrix effect by the use of RAM supports in methods by LC–MS and into the low number of methods for enantiomeric separations by direct injections of biological samples are addressed. The diversity of systems that incorporate RAMs for selective sample clean-up or fractionation in proteome and peptidome analysis is also covered.

Dynamically coated silica monolith with ionic liquids for capillary electrochromatography

An ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) was introduced as dynamic coating of a silica monolithic column for capillary electrochromatography of phenols and nucleoside monophosphates. The run-to-run and column-to-column repeatability of migration time for six phenols were satisfactory on this column with relative standard deviation values less than 0.90 and 4.31%, respectively. Anodic electroosmotic flow (EOF) was observed, which increased with the increase of [BMIM][BF4] concentration within 120 mM and when [BMIM][BF4] concentration was above 120 mM, EOF leveled off due to the saturation of [BMIM][BF4] on the monolith. Efficient separation of phenols and nucleoside monophosphates on this dynamically coated monolithic column was obtained, compared with a dynamically coated fused-silica column and unmodified silica monolithic column. The retention behavior of uncharged phenols is mainly manipulated by hydrophobic interactions due to the presence of butyl groups, and that of nucleoside monophosphates is governed by the electrostatic attraction mechanism based on the interaction between positively charged [BMIM][BF4] moieties and negatively charged phosphate groups. In addition, silica matrix also contributes to the separation resolution.

Neutral octadecyl monolith for reversed phase capillary electrochromatography of a wide range of solutes

A neutral octadecyl monolithic (ODM) column for RP capillary electrochromatography (RP-CEC) has been developed. The ODM column was prepared by the in situ polymerization of octadecyl acrylate (ODA) as the monomer and trimethylolpropanetrimethacrylate (TRIM) as the crosslinker, in a ternary porogenic solvent containing cyclohexanol, ethylene glycol, and water. The ODM column exhibited cathodal EOF over a wide range of pH and ACN concentration in the mobile phase despite the fact that it was devoid of any fixed charges. It is believed that the EOF is due to the adsorption of ions from the mobile phase onto the surface of the monolith thus imparting to the neutral ODM column the zeta potential necessary to support the EOF required for mass transport across the monolithic column. Furthermore, the adsorption of mobile phase ions to the neutral monolith modulated solute retention and affected the separation selectivity. The wide applications of the neutral ODM column were demonstrated by its ability to separate a wide range of small and large solutes, both neutral and charged. While the separation of the neutral solutes was based on RP retention mechanism, the charged solutes were separated on the basis of their electrophoretic mobility and hydrophobic interaction with the C18 ligands of the stationary phase. As a typical result, the neutral monolithic column was able to separate peptides quite rapidly with a separation efficiency of nearly 200,000 plates/m, and this efficiency was exploited in tryptic peptide mapping of standard proteins, e. g., lysozyme and cytochrome C, by isocratic elution.

Integrated analytical strategies for the study of phosphorylation and glycosylation in proteins

The post-translational modification (PTM) of proteins is a common biological mechanism for regulating protein localization, function, and turnover. The direct analysis of modifications is required because they are not coded by genes, and thus are not predictable. Different MS-based proteomic strategies are used for the analysis of PTMs, such as phosphorylation and glycosylation, and are composed of a structural simplification step of the protein followed by specific isolation step to extract the classes of modified peptides (also called "sub-proteomes") before mass spectrometry. This specific isolation step is necessary because PTMs occur at a sub-stoichiometric level and signal suppression of the modified fractions in the mass spectrometer occurs in the presence of the more-abundant non-modified counterpart. The request of innovative analytical strategies in PTM studies is the capability to localize the modification sites, give detailed structural information on the modification, and determine the isoform composition with increased selectivity, sensitivity, and throughput. This review focuses on the description of recent integrated analytical systems proposed for the analysis of PTMs in proteins, and their application to profile the glycoproteome and the phosphoproteome in biological samples. Comments on the difficulties and usefulness of the analytical strategies are given.

Development of a silica monolith microbioreactor entrapping highly activated lipase and an experiment toward integration with chromatographic separation of chiral esters

Microbioreactors are effective for high-throughput production of expensive products from small amounts of substrates. Lipases are versatile enzymes for chiral syntheses, and are highly activated when immobilized in alkyl-substituted silicates by the sol-gel method. For practical application of sol-gel immobilized lipases to a flow system, a microbioreactor loaded with a macroporous silica monolith is well suited, because it can be easily integrated with a chromatographic separator for optical resolution. We attempted to develop a microbioreactor containing a silica monolith-immobilized lipase. A nonshrinkable silica monolith was first formed from a 4:1 mixture of methyltrimethoxysilane (MTMS) and tetramethoxysilane (TMOS). It was then coated with silica precipitates entrapping lipase, derived from a 4:1 mixture of n-butyltrimethoxysilane (BTMS) and TMOS. As a result, monolith treated with the BTMS-based silicate entrapping lipase exhibited approximately ten times higher activity than nontreated monolith-immobilized lipase derived from the MTMS-based silicate, in transesterification between glycidol and vinyl n-butyrate in isooctane. A commercially available chiral column was connected in series to the monolith microbioreactor, and a pulse of substrate solution was supplied at the inlet of the reactor. Successful resolution of the racemic ester produced was achieved in the chromatographic column.

Separation efficiencies in hydrophilic interaction chromatography

Hydrophilic interaction chromatography (HILIC) is important for the separation of highly polar substances including biologically active compounds, such as pharmaceutical drugs, neurotransmitters, nucleosides, nucleotides, amino acids, peptides, proteins, oligosaccharides, carbohydrates, etc. In the HILIC mode separation, aqueous organic solvents are used as mobile phases on more polar stationary phases that consist of bare silica, and silica phases modified with amino, amide, zwitterionic functional group, polyols including saccharides and other polar groups. This review discusses the column efficiency of HILIC materials in relation to solute and stationary phase structures, as well as comparisons between particle-packed and monolithic columns. In addition, a literature review consisting of 2006-2007 data is included, as a follow up to the excellent review by Hemström and Irgum.