Development of A Liquid-Phase Microextraction Method for Simultaneous Determination of Parabens in Lipstick Samples at Trace Levels by High-Performance Liquid Chromatography

The endocrine-disrupting potential of parabens, as well as their relation to cancer, has sparked significant discussions over their impact. Consequently, analyses of cosmetic products are an essential necessity, particularly in terms of human health and safety. In this study, a highly accurate and sensitive liquid-phase-based microextraction method was developed to determine the five parabens at trace levels by high-performance liquid chromatography. All prominent parameters of the method such as extraction solvent type and amount (1,2-dichloroethane/250 μL), and dispersive solvent type and amount (isopropyl alcohol/2.0 mL) were optimized to enhance the extraction efficiency of the analytes. The mobile phase consisting of 50 mM ammonium formate aqueous solution (pH 4.0) and acetonitrile (60:40, v/v) was used to elute the analytes at a flow rate of 1.2 mL min-1 in the isocratic mode. Analytical performance of the optimum method for methyl, ethyl, propyl, butyl and benzyl parabens were determined and the analytes recorded detection limit values of 0.78, 0.75, 0.34, 0.33 and 0.75 μg kg-1, respectively. Four different lipstick samples were analyzed under optimum conditions of the developed method, and the amount of parabens quantified in the samples using matrix matched calibration standards was in the range of 0.11-1.03%.

Mass-Spectrometry-Based Research of Cosmetic Ingredients

Cosmetic products are chemical substances or mixtures used on the skin, hair, nails, teeth, and the mucous membranes of the oral cavity, whose use is intended to clean, protect, correct body odor, perfume, keep in good condition, or change appearance. The analysis of cosmetic ingredients is often challenging because of their huge complexity and their adulteration. Among various analytical tools, mass spectrometry (MS) has been largely used for compound detection, ingredient screening, quality control, detection of product authenticity, and health risk evaluation. This work is focused on the MS applications in detecting and quantification of some common cosmetic ingredients, i.e., preservatives, dyes, heavy metals, allergens, and bioconjugates in various matrices (leave-on or rinse-off cosmetic products). As a global view, MS-based analysis of bioconjugates is a narrow field, and LC- and GC/GC×GC-MS are widely used for the investigation of preservatives, dyes, and fragrances, while inductively coupled plasma (ICP)-MS is ideal for comprehensive analysis of heavy metals. Ambient ionization approaches and advanced separation methods (i.e., convergence chromatography (UPC2)) coupled to MS have been proven to be an excellent choice for the analysis of scented allergens. At the same time, the current paper explores the challenges of MS-based analysis for cosmetic safety studies.

MIL-68 (Ga) for the extraction of derivatized and non-derivatized parabens from healthcare products

This study was the first-ever attempt to apply MIL-68 (Ga) in developing an analytical method. The method extracts and preconcentrates some parabens from mouthwash and hydrating gel samples. The variable extraction parameters were optimized, and the figures of merit were documented. Avogadro software was used besides discussing intermolecular interactions to clarify the absorption process. ComplexGAPI software was also exploited to assess the greenness of the method. After the derivatization of the parabens using acetic anhydride in the presence of sodium carbonate, sodium chloride was added to the solution and vortexed to dissolve. A few milligrams of MIL-68 (Ga) were added into the solution and vortexed. Centrifugation separated the analyte-loaded absorbent, which was treated with mL volume of methanol through vortexing for desorption aim. A few microliters of 1,2-dibromoethane were merged with the methanolic phase and injected into a sodium chloride solution. One microliter of the extracted phase was injected into a gas chromatograph equipped with a flame ionization detector. High enrichment factors (200-330), reasonable extraction recoveries (40-66%), wide linear ranges (265-30,000 µg L-1), and appreciable coefficients of determination (0.996-0.999) were documented. The applicability of dispersive solid phase extraction for extracting polar analytes, imposing no additional step for performing derivatization, the capability of MIL-68 (Ga) for the absorption of both derivatized and non-derivatized parabens, the use of only 10 mg absorbent, and one-pot synthesis besides no high temperature or long reaction time in the sorbent provision are the highlights of the method.

Ultrasound-assisted cloud point microextraction of certain preservatives in real samples and determination by HPLC

Ultrasound-assisted cloud point microextraction (UA-CPME) was performed for certain preservatives (p-hydroxy benzoic acid and its alkyl esters, methyl, ethyl, propyl and butyl parabens). Then, an HPLC method was developed for their simultaneous determination in pharmaceutical and cosmetic samples. The chromatograms of these substances were recorded on a C18 column using a gradient elution technique with various solvent systems at different flow rates and at 254 nm wavelength using a diode-array detector (DAD). The analysis conditions found by the classical method were optimized using the Box-Behnken design (BBD). In the design, the effect of each factor was examined with 3 and 4 factors for UA-CPME and HPLC analyses, respectively. The brij 58 concentration (BC), Na₂SO₄ amount (SA) and extraction time (ET) for UA-CPME, and the mobile phase 1 (MP1) ratio, mobile phase 2 (MP2) ratio, flow rate (FR) and column temperature parameters for HPLC analysis were obtained for the investigated levels. The factors affecting the resolution were determined by applying regression analysis to the experimental results. The analysis of variance (ANOVA) test was applied to ensure result reliability. The ANOVA test was used to determine the reliability of the results. A model was created with the obtained data. The developed method was validated by examining linearity, reproducibility, accuracy, limit of quantification and limit of the detection. Methyl paraben (with 0.148% RSD value and 0.060% relative error), and propyl paraben (with 0.149% RSD value and 0.120% relative error) were determined in the syrup sample by the developed method. Methyl paraben with recovery values of (98.32-99.42)% and ethyl paraben with recovery values of (99.17-99.41)%, were determined in a hand cream.

Extraction of parabens by melamine sponge with determination by high-performance liquid chromatography

In the present study, we propose a novel method for the extraction of parabens in personal care products. A new, simple adsorptive material was obtained by combining metal-organic frameworks and melamine sponges using the adhesive property of polyvinylidene fluoride. This new material, metal-organic frameworks/melamine sponges, was found to be particularly suitable for solid-phase extraction. The structural characteristics of metal-organic frameworks/melamine sponges were first analyzed by scanning electron microscopy. Subsequently, solid-phase extraction was performed on sample solutions, and the extracted substances were then analyzed by high-performance liquid chromatography. Following optimization of important experimental conditions, excellent recovery rates were obtained. Our novel method was then applied to the extraction of four parabens (methylparahydroxybenzoates, ethylparahydroxybenzoates, propylparahydroxybenzoates, and butylparahydroxybenzoates) from real samples. The results yielded LODs of 0.26-0.41 ng/mL. The inter- and intra-day recoveries were 104.0-109.7% and 91.2-98.1%, respectively (relative standard deviation, <13.8%).

Determination of Phthalate Esters in Cosmetics and Baby Care Products by a Biosorbent Based on Lawsone Capped Chitosan and Followed by Liquid Chromatography

This research presents a green synthetic pathway for the preparation of a new biosorbent and eco-friendly extraction process of three phthalate esters: dimethyl phthalate, di-butyl phthalate and benzyl butyl phthalate, from cosmetics and baby care products. Dispersive solid-phase extraction was used based on a new core-shell biomass/sorbent; chitosan-loaded lawsone. The proposed method provides fortunate trapping of phthalate esters in a one-step extraction. Under the optimized extraction conditions, the current work was presented low detection limits (0.03-0.15 ng. g-1), limits of quantification (0.1-0.5 ng·g-1) and reasonable linearity (0.1-10 000 ng. g-1). The applicability of the method was estimated by recovery experiments at different spiking levels (n = 5) for phthalate esters in the real samples.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

Miniaturized Matrix Solid-Phase Dispersion for the Analysis of Ultraviolet Filters and Other Cosmetic Ingredients in Personal Care Products

A method based on micro-matrix solid-phase dispersion (μ-MSPD) followed by gas-chromatography tandem mass spectrometry (GC–MS/MS) was developed to analyze UV filters in personal care products. It is the first time that MSPD is employed to extract UV filters from cosmetics samples. This technique provides efficient and low-cost extractions, and allows performing extraction and clean-up in one step, which is one of their main advantages. The amount of sample employed was only 0.1 g and the extraction procedure was performed preparing the sample-sorbent column in a glass Pasteur pipette instead of the classic plastic columns in order to avoid plastizicer contamination. Factors affecting the process such as type of sorbent, and amount and type of elution solvent were studied by a factorial design. The method was validated and extended to other families of cosmetic ingredients such as fragrance allergens, preservatives, plasticizers and synthetic musks, including a total of 78 target analytes. Recovery studies in real sample at several concentration levels were also performed. Finally, the green extraction methodology was applied to the analysis of real cosmetic samples of different nature.

In-Syringe Micro Solid-Phase Extraction Method for the Separation and Preconcentration of Parabens in Environmental Water Samples

In this study, a simple, rapid and effective in-syringe micro-solid phase extraction (MSPE) method was developed for the separation and preconcetration of parabens (methyl, ethyl, propyl and butyl paraben) in environmental water samples. The parabens were determined and quantified using high performance liquid chromatography and a photo diode array detector (HPLC-PDA). Chitosan-coated activated carbon (CAC) was used as the sorbent in the in-syringe MSPE device. A response surface methodology based on central composite design was used for the optimization of factors (eluent solvent type, eluent volume, number of elution cycles, sample volume, sample pH) affecting the extraction efficiency of the preconcentration procedure. The adsorbent used displayed excellent absorption performance and the adsorption capacity ranged from 227–256 mg g⁻¹. Under the optimal conditions the dynamic linear ranges for the parabens were between 0.04 and 380 µg L⁻¹. The limits of detection and quantification ranged from 6–15 ng L⁻¹ and 20–50 ng L⁻¹, respectively. The intraday (repeatability) and interday (reproducibility) precisions expressed as relative standard deviations (%RSD) were below 5%. Furthermore, the in-syringe MSPE/HPLC procedure was validated using spiked wastewater and tap water samples and the recoveries ranged between from 96.7 to 107%. In conclusion, CAC based in-syringe MSPE method demonstrated great potential for preconcentration of parabens in complex environmental water.

3D-Printed Microflow Injection Analysis Platform for Online Magnetic Nanoparticle Sorptive Extraction of Antimicrobials in Biological Specimens as a Front End to Liquid Chromatographic Assays

In this work, the concept of 3D-printed microflow injection (3D-μFI) embodying a dedicated multifunctional 3D-printed stator onto a rotary microvalve along with a mesofluidic sample preparation platform is proposed for the first time. A transparent 3D-printed stereolithographic mesofluidic chip device accommodating polyaniline (PANI) decorated magnetic nanoparticles (32.5 ± 3.8 mg) is harnessed to in-line sorptive microextraction as a front end to liquid chromatography with peak focusing. As a proof-of-concept application, the 3D-μFI assembly was resorted to matrix cleanup and automatic programmable-flow determination of organic emerging contaminants (4-hydroxybenzoate analogues and triclosan as antimicrobial model analytes) in human saliva and urine samples. By using a sample volume of 1.0 mL with a loading flow rate of 200 μL min^-1, an eluent volume of 120 μL at 80 μL min^-1, and online HPLC injection of 300 μL of the mixture of eluate and Milli-Q water (in a 1:2 ratio) to prevent band broadening effects of the most polar analytes, the limits of detection (3σ criterion) ranged from 1.1 to 4.5 ng mL^-1 for methylparaben (MP), ethylparaben (EP), propylparaben (PrP), phenylparaben (PhP), butylparaben (BP), and triclosan (TCS). Enhancement factors of 16-25 were obtained for the target analytes. Spike recoveries ranged from 84 to 117% for both saliva and urine samples. The online 3D-μFI hyphenated method is synchronized with the chromatographic separation and features a chip lifetime of more than 20 injections with minimal losses of moderately nonpolar compounds on the walls of the mesofluidic device.

Current trends in sample preparation for cosmetic analysis

The widespread applications of cosmetics in modern life make their analysis particularly important from a safety point of view. There is a wide variety of restricted ingredients and prohibited substances that primarily influence the safety of cosmetics. Sample preparation for cosmetic analysis is a crucial step as the complex matrices may seriously interfere with the determination of target analytes. In this review, some new developments (2010-2016) in sample preparation techniques for cosmetic analysis, including liquid-phase microextraction, solid-phase microextraction, matrix solid-phase dispersion, pressurized liquid extraction, cloud point extraction, ultrasound-assisted extraction, and microwave digestion, are presented. Furthermore, the research and progress in sample preparation techniques and their applications in the separation and purification of allowed ingredients and prohibited substances are reviewed.

Positive lists of cosmetic ingredients: Analytical methodology for regulatory and safety controls - A review

Cosmetic products placed on the market and their ingredients, must be safe under reasonable conditions of use, in accordance to the current legislation. Therefore, regulated and allowed chemical substances must meet the regulatory criteria to be used as ingredients in cosmetics and personal care products, and adequate analytical methodology is needed to evaluate the degree of compliance. This article reviews the most recent methods (2005-2015) used for the extraction and the analytical determination of the ingredients included in the positive lists of the European Regulation of Cosmetic Products (EC 1223/2009): comprising colorants, preservatives and UV filters. It summarizes the analytical properties of the most relevant analytical methods along with the possibilities of fulfilment of the current regulatory issues. The cosmetic legislation is frequently being updated; consequently, the analytical methodology must be constantly revised and improved to meet safety requirements. The article highlights the most important advances in analytical methodology for cosmetics control, both in relation to the sample pretreatment and extraction and the different instrumental approaches developed to solve this challenge. Cosmetics are complex samples, and most of them require a sample pretreatment before analysis. In the last times, the research conducted covering this aspect, tended to the use of green extraction and microextraction techniques. Analytical methods were generally based on liquid chromatography with UV detection, and gas and liquid chromatographic techniques hyphenated with single or tandem mass spectrometry; but some interesting proposals based on electrophoresis have also been reported, together with some electroanalytical approaches. Regarding the number of ingredients considered for analytical control, single analyte methods have been proposed, although the most useful ones in the real life cosmetic analysis are the multianalyte approaches.

Multi-residue method for determination of 58 pesticides, pharmaceuticals and personal care products in water using solvent demulsification dispersive liquid-liquid microextraction combined with liquid chromatography-tandem mass spectrometry

A rapid and efficient sample pretreatment using solvent-based de-emulsification dispersive liquid-liquid microextraction (SD-DLLME) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was studied for the extraction of 58 pharmaceuticals and personal care products (PPCPs) and pesticides from water samples. Type and volume of extraction and disperser solvents, pH, salt addition, amount of salt and type of demulsification solvent were evaluated. Limits of quantification (LOQ) in the range from 0.0125 to 1.25 µg L(-1) were reached, and linearity was in the range from the LOQ of each compound to 25 μg L(-1). Recoveries ranged from 60% to 120% for 84% of the compounds, with relative standard deviations lower than 29%. The proposed method demonstrated, for the first time, that sample preparation by SD-DLLME with determination by LC-MS/MS can be successfully used for the simultaneous extraction of 32 pesticides and 26 PPCPs from water samples. The entire procedure, including the extraction of 58 organic compounds from the aqueous sample solution and the breaking up of the emulsion after extraction with water, rather than with an organic solvent, was environmentally friendly. In addition, this technique was less expensive and faster than traditional techniques. Finally, the analytical method under study was successfully applied to the analysis of all 58 pesticides and PPCPs in surface water samples.

Gas Chromatographic determination of parabens after derivatization and dispersive microextraction

In this study a dispersive liquid–liquid microextraction method combines with an in situ derivatization. The proposed method is used for the extraction and pre-concentration of some preservatives including methyl paraben, ethyl paraben, propyl paraben and butyl paraben from different water matrices. The extracted compounds are monitored by gas chromatography-flame ionization detector. Parabens are derivatizated by propionic anhydride. The effects of the extraction solvent type, extraction and acylation time, derivative agent volume, temperature, pH and the ionic strength of the solution on the extraction efficiency were investigated. 50 mkl chloroform and 500 mkl acetonitrile is a mixture of suitable extraction and dispersive solvents. The mixture is centrifuged for 3min at 4000 rpm. 20 mkl propionic anhydride is used for derivatization parabens in the concentration range of 0.05 - 1 mg within 2 - 3 minutes. The optimum pH range is 8 - 9. The relative standard deviations (RSDs) of parabens were in the range of 2.0–10.0% (n = 3). The method was applied to the analysis of the four parabens in water. For the analysis of the spiked samples, a recovery above 100 % were obtained.

Rapid determination of parabens in personal care products by stable isotope GC-MS/MS with dynamic selected reaction monitoring

In this study, a rapid and sensitive analytical method for the determination of methyl-, ethyl-, propyl-, and butyl esters of para-hydroxy benzoic acid (parabens) in personal care products was developed and fully validated. Test portions were extracted with methanol followed by vortexing, sonication, centrifugation, and filtration without derivatization. The four parabens were quantified by GC-MS/MS in the electron ionization mode. Four corresponding isotopically labeled parabens were selected as internal standards, which were added at the beginning of the sample preparation and used to correct for recovery and matrix effects. Sensitivity, extraction efficiency, and recovery of the respective analytes were evaluated. The coefficients of determination (r(2)) were all greater than 0.995 for the four parabens investigated. The recoveries ranged from 97 to 107% at three spiked levels and a one-time (single) extraction efficiency greater than 97% was obtained. This method has been applied to screen 26 personal care products. This is the first time that a unique GC-MS/MS method with dynamic selected reaction monitoring and confirmation of analytes has been used to determine these parabens in cosmetic personal care products.

Analysis of multi-class preservatives in leave-on and rinse-off cosmetics by matrix solid-phase dispersion

Matrix solid-phase extraction has been successfully applied for the determination of multi-class preservatives in a wide variety of cosmetic samples including rinse-off and leave-on products. After extraction, derivatization with acetic anhydride, and gas chromatography-mass spectrometry analysis were performed. Optimization studies were done on real non-spiked and spiked leave-on and rinse-off cosmetic samples. The selection of the most suitable extraction conditions was made using statistical tools such as ANOVA, as well as factorial experimental designs. The final optimized conditions were common for both groups of cosmetics and included the dispersion of the sample with Florisil (1:4), and the elution of the MSPD column with 5 mL of hexane/acetone (1:1). After derivatization, the extract was analyzed without any further clean-up or concentration step. Accuracy, precision, linearity and detection limits were evaluated to assess the performance of the proposed method. The recovery studies on leave-on and rinse-off cosmetics gave satisfactory values (>78% for all analytes in all the samples) with an average relative standard deviation value of 4.2%. The quantification limits were well below those set by the international cosmetic regulations, making this multi-component analytical method suitable for routine control. The analysis of a broad range of cosmetics including body milk, moisturizing creams, anti-stretch marks creams, hand creams, deodorant, shampoos, liquid soaps, makeup, sun milk, hand soaps, among others, demonstrated the high use of most of the target preservatives, especially butylated hydroxytoluene, methylparaben, propylparaben, and butylparaben.

A new liquid chromatography-tandem mass spectrometry method for determination of parabens in human placental tissue samples

Endocrine disruptors are a group of organic compounds widely used, which are ubiquitous in the environment and in biological samples. The main effect of these compounds is associated with their ability to mimic or block the action of natural hormones in living organisms, including humans. Parabens (esters of p-hydroxybenzoic acid) belong to this group of compounds. In this work, we propose a new liquid chromatography-tandem mass spectrometry (LC-MS/MS) method to asses the presence of parabens most commonly used in industrial applications (methyl-, ethyl-, propyl- and butyl-paraben) in samples of human placental tissue. The method involves the extraction of the analytes from the samples using ethyl acetate, followed by a clean-up step using centrifugation prior to their quantification by LC-MS/MS using an atmospheric pressure chemical ionization (APCI) interface in the negative mode. Deuterated bisphenol A (BPA-d(16)) was used as surrogate. Found detection limits (LOD) ranged from 0.03 to 0.06 ng g(-1) and quantification limits (LOQ) from 0.1 to 0.2 ng g(-1), while inter- and intra-day variability was under 13.8%. The method was validated using standard addition calibration and a spike recovery assay. Recovery rates for spiked samples ranged from 82% to 108%. This method was satisfactorily applied for the determination of parabens in 50 placental tissue samples collected from women who live in the province of Granada (Spain).