Synthesis of a metal-organic framework confined in periodic mesoporous silica with enhanced hydrostability as a novel fiber coating for solid-phase microextraction

Application of a needle trap device packed with a MIP@MOF nano-composite for efficient sampling and determination of airborne diazinon pesticide

In this research, a novel, selective, and efficient porous adsorbent nano-composite comprising a molecularly imprinted polymer and a metal-organic framework (MIP@MOF) was employed for sampling, extraction and analysis of diazinon from the air by a needle trap device (NTD), for the first time. The synthesized MIP@MOF sorbent was characterized by the FT-IR, XRD, FE-SEM, TEM, and EDS techniques. Then, the effective parameters of the sampling (temperature and humidity) and desorption (time and temperature) process were optimized by response surface methodology (RSM). The optimum values of temperature and humidity of the sampling chamber were estimated to be 20 °C and 25.0%, respectively. Also, the highest response during the analyte desorption was obtained at 262 °C and 4.5 minutes. For more details, the performance of the MIP@MOF:NTD method was evaluated by determination of important parameters such as repeatability, reproducibility, the limit of detection (LOD), and the limit of quantification (LOQ), and then compared with the NIOSH 5600 standard method. The values of LOD and LOQ for the targeted analyte were determined to be 0.02 and 0.1 μg m-3, respectively. Also, the repeatability and reproducibility of the proposed method were obtained in the range of (3.9-5.1)% and (5.1-6.4)%, respectively, which proved the acceptable precision of the method. Furthermore, the results of this study exhibited a high correlation coefficient (R 2 = 0.9781) between the proposed method and the recommended NIOSH method. Finally, the proposed procedure was utilized for sampling and determination of the airborne diazinon in real conditions. These results indicated that the proposed MIP@MOF:NTD method can be employed as a fast, simple, environmentally friendly, selective, and effective procedure for sampling and determining diazinon in air.

Best Practices in the Characterization of MOF@MSN Composites

Research on permanently porous nanomaterials has gripped the attention of materials chemists for decades. Mesoporous silica nanoparticles (MSNs) and metal-organic frameworks (MOFs) are two of the most studied classes of materials in this field. Recently, explorations into embedding MOFs within the mesopores of MSNs have aimed to create composites that are greater than the sum of their parts. While initial progress has been promising, it has become clear that the characterization of these MOF@MSN composite materials represents a significant challenge that is often overlooked, leading to an unfortunate ambiguity in the field. The greatest difficulty lies in determining whether the product of a synthesis is simply a physical mixture of the two materials or truly the targeted composite, with MOF exclusively crystallized in the pores or on the surfaces of the MSN. This challenge is aggravated by the dramatically different porosity and composition of the components, often resulting in ambiguous information from common characterization techniques. This Viewpoint will address this challenge by calling attention to the mentioned issues and proposing a standardized approach to characterizing these materials. In particular, the use of powder X-ray diffraction, gas physisorption, and electron microscopy with systematic control experiments and data analysis is outlined. This approach can provide the information needed to clearly validate the architecture of an apparent MOF@MSN composite.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

A Comprehensive Review on Metal Organic Framework Based Preconcentration Strategies for Chromatographic Analysis of Organic Pollutants

Organic pollutants (OPs) are of worldwide concern for being hazardous to human existence and natural flora and fauna in view of their contaminating nature, bio-aggregation properties and long range movement abilities in environment. Metal organic frameworks (MOFs) are a new kind of crystalline porous material, composed of metal ions and multi dentate organic ligands with well-defined co-ordination geometry exhibiting promising application respect to adsorptive evacuation of OPs for chromatographic analysis. Applications of MOFs as preconcentration material and column packing material are reviewed. Key analytical characteristics of MOF based preconcentration techniques and coupled chromatographic procedures are summarized in detail. MOF based preconcentration strategies are compared with conventional sorbent based extraction techniques for thorough evaluation of performance of MOF materials.

Polymeric metal-containing ionic liquid sorbent coating for the determination of amines using headspace solid-phase microextraction

This study describes the design, synthesis, and application of polymeric ionic liquid sorbent coatings featuring nickel metal centers for the determination of volatile and semivolatile amines from water samples using headspace solid-phase microextraction. The examined polymeric ionic liquid (PIL) sorbent coatings were composed of two ionic liquid monomers (tetra(3-vinylimidazolium)nickel bis[(trifluoromethyl)sulfonyl]imide [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] and 1-vinyl-3-hexylimidazolium [HVIM⁺ ][NTf₂ ^- ]), and an ionic liquid cross-linker (1,12-di(3-vinylimidazolium)dodecane  [(VIM)₂ C₁₂ ²⁺ ] 2[NTf₂ ^- ]). With these ionic liquid monomers and cross-linkers, three different types of coatings were prepared: PIL 1 based on the neat [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] monomer, PIL 2 consisting of the [Ni²⁺ (VIM)₄ ] 2[NTf₂ ^- ] monomer with addition of cross-linker, and PIL 3 composed of the [HVIM⁺ ][NTf₂ ^- ] monomer and cross-linker. Analytical performance of the prepared sorbent coatings using headspace solid-phase microextraction gas chromatography-mass spectrometry was compared with the polydimethylsiloxane and polyacrylate commercial coatings. The PIL 2 sorbent coating yielded the highest enrichment factors ranging from 5500 to over 160 000 for the target analytes. The developed headspace solid-phase microextraction gas chromatography-mass spectrometry method was applied for the analysis of real samples (the concentration of amines was 200 μg/L), producing relative recovery values in the range of 90.9-120.0% (PIL 1) and 83.0-122.7% (PIL 2) from tap water, and 84.8-112.4% (PIL 1) and 79.2-119.3% (PIL 2) from lake water.

Sample Preparation Using Graphene-Oxide-Derived Nanomaterials for the Extraction of Metals

Graphene oxide is a compound with a form similar to graphene, composed of carbon atoms in a sp2 single-atom layer of a hybrid connection. Due to its significant surface area and its good mechanical and thermal stability, graphene oxide has a plethora of applications in various scientific fields including heterogenous catalysis, gas storage, environmental remediation, etc. In analytical chemistry, graphene oxide has been successfully employed for the extraction and preconcentration of organic compounds, metal ions, and proteins. Since graphene oxide sheets are negatively charged in aqueous solutions, the material and its derivatives are ideal sorbents to bind with metal ions. To date, various graphene oxide nanocomposites have been successfully synthesized and evaluated for the extraction and preconcentration of metal ions from biological, environmental, agricultural, and food samples. In this review article, we aim to discuss the application of graphene oxide and functionalized graphene oxide nanocomposites for the extraction of metal ions prior to their determination via an instrumental analytical technique. Applications of ionic liquids and deep eutectic solvents for the modification of graphene oxide and its functionalized derivatives are also discussed.

Development of a needle trap device packed with titanium-based metal-organic framework sorbent for extraction of phenolic derivatives in air

We developed a novel method of needle trap device packed with titanium-based metal-organic framework for the extraction of phenolic derivatives in air followed by gas chromatography-flame ionization detector analysis. The synthetized adsorbent was packed inside a 22-gauge spinal needle. This method was first tested at laboratory scale, and then was used for field sampling of phenolic derivatives in air. A glass chamber placed on a heater at 60°C was used to provide different concentrations of phenolic derivatives. The desorption conditions and breakthrough volume were optimized using response surface methodology. The limit of detection and limit of quantitation of the proposed method were estimated to be in the range of 0.001-0.12 and 0.003-0.62 ng/mL, respectively, indicating a high sensitivity for the suggested sampler. Storing the packed needle trap device in a refrigerator at 4˚C for 60 days did not dramatically affect the storage stability. Our findings indicated that there was a high correlation coefficient (R²  = 0.99) between the measurement results of this method and the NIOSH recommended method (XAD-7 sorbent tube). Therefore, it can be concluded that the needle trap device packed with titanium-based metal-organic framework can be used as a efficient method for extraction of phenolic derivatives in air.

Functional Metal Organic Framework/SiO2 Nanocomposites: From Versatile Synthesis to Advanced Applications

Metal organic frameworks (MOFs), also called porous coordination polymers, have attracted extensive attention as molecular-level organic-inorganic hybrid supramolecular solid materials bridged by metal ions/clusters and organic ligands. Given their advantages, such as their high specific surface area, high porosity, and open active metal sites, MOFs offer great potential for gas storage, adsorption, catalysis, pollute removal, and biomedicine. However, the relatively weak stability and poor mechanical property of most MOFs have limited the practical application of such materials. Recently, the combination of MOFs with inorganic materials has been found to provide a possible strategy to solve such limitations. Silica, which has excellent chemical stability and mechanical properties, shows great advantages in compounding with MOFs to improve their properties and performance. It not only provides structured support for MOF materials but also improves the stability of materials through hydrophobic interaction or covalent bonding. This review summarizes the fabrication strategy, structural characteristics, and applications of MOF/silica composites, focusing on their application in chromatographic column separation, catalysis, biomedicine, and adsorption. The challenges of the application of MOF/SiO2 composites are addressed, and future developments are prospected.

Metal–Organic Frameworks as Key Materials for Solid-Phase Microextraction Devices—A Review

Metal–organic frameworks (MOFs) have attracted recently considerable attention in analytical sample preparation, particularly when used as novel sorbent materials in solid-phase microextraction (SPME). MOFs are highly ordered porous crystalline structures, full of cavities. They are formed by inorganic centers (metal ion atoms or metal clusters) and organic linkers connected by covalent coordination bonds. Depending on the ratio of such precursors and the synthetic conditions, the characteristics of the resulting MOF vary significantly, thus drifting into a countless number of interesting materials with unique properties. Among astonishing features of MOFs, their high chemical and thermal stability, easy tuneability, simple synthesis, and impressive surface area (which is the highest known), are the most attractive characteristics that makes them outstanding materials in SPME. This review offers an overview on the current state of the use of MOFs in different SPME configurations, in all cases covering extraction devices coated with (or incorporating) MOFs, with particular emphases in their preparation.

Double -shelled hollow ZnO/carbon nanocubes as an efficient solid-phase microextraction coating for the extraction of broad-spectrum pollutants

Efficient extraction of pollutants with different chemical properties from environmental samples has attracted great attention in the development of analytical chemistry. However, it is still a challenge to develop an appropriate and sensitive adsorbent for determining broad-spectrum analytes. Herein, zeolitic imidazole framework-8 (ZIF-8)-derived double-shelled hollow zinc oxide/carbon (ZnO/C) nanocubes were reported as a novel coating for solid-phase microextraction (SPME). The nanocubes with a unique structure and composition were obtained by controlled etching of ZIF-8 with tannic acid (TA) followed by pyrolysis. When a ZnO/C nanocube-coated fiber (ZnO/C-F) was used to extract the complex environmental samples containing both nonpolar (benzene compounds (BTEX)) and polar (chlorophenols (CPs)) pollutants, excellent extraction performance was achieved; we obtained low detection limits (0.14-0.56 ng L-1 for BTEX and 1.10-2.84 ng L-1 for CPs), good repeatability (2.2-5.9% for six replicated extractions) and excellent reproducibility (0.61-7.8%, fiber to fiber). The broad-spectrum SPME performance was ascribed to the synergistic effect between the composition and structure of ZnO/C nanocubes. Compositionally, the uniform dispersion of ZnO and carbon framework could provide abundant adsorption active sites, where Zn-OHs bound CPs by hydrogen bonding and carbon absorbed BTEX through π-π stacking interaction and hydrophobic interaction. Structurally, the double-shelled hollow morphology of the nanocubes was favorable for the sensitive extraction. Finally, the established ZnO/C-F-based headspace-SPME method was used for the preconcentration and determination of abundant analytes from real water samples. These findings open the door for the practical use of double-shelled hollow multicompositional inorganic materials.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Recent applications of metal-organic frameworks in sample pretreatment

Metal-organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal-organic frameworks are divided into moisture-sensitive and water-stable types. In the actual applications, both kinds of metal-organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal-organic frameworks derived carbon. These metal-organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal-organic frameworks and their composites in sample pretreatment modes, that is, solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction, solid-phase microextraction, and stir bar solid extraction.