Analysis of chlorophenols in environmental water using polydopamine-coated magnetic graphene as an extraction material coupled with high-performance liquid chromatography

Charge-controllable mussel-inspired magnetic nanocomposites for selective dye adsorption and separation

Magnetic polydopamine (PDA) nanocomposites were prepared with a facile and sustainable synthetic method. The as-synthesized polymer-based hybrid composites inherited the intrinsic adhesiveness contributed by catechol and amino moieties of PDA as well as the magnetic property of Fe₃O₄. With the unique properties of PDA, the surface charges of Fe₃O₄@PDA could be easily tuned by pH for smart adsorption-desorption behaviors. Four commercially available dyestuffs including crystal violet, rhodamine B, direct blue 71 and orange G with different structures and surface charges in solution were selected to investigate the adsorption ability and universality of Fe₃O₄@PDA in wastewater treatment. It was found that the nanocomposites could successfully adsorb these cationic and anionic dyes under suitable pH conditions. This confirmed the ability of the nanoadsorbents for the removal of common textile dyes. The dispersed magnetic nanoadsorbents also demonstrated the ease of collection from dye mixtures, and the possibility of reusing them for several cycles. Selective dye separation was found to be achievable via simple charge control without large consumption of organic solvent and energy. These bio-inspired nanocomposite adsorbents have shown high potential in wastewater treatment and selective recovery of dye waste, especially for wastewater containing ionic dyes.

Field-amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE-ultraviolet (UV) detection based on the on-line preconcentration strategy of field-amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4-chlorophenol (4-CP), 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and 2,6-dichlorophenol (2,6-DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP, and 2,6-DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI-CZE-UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018-0.019 µg/mL and 0.0089-0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006-0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6-TCP, 2,4-DCP, and 2-CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0-119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37-8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.

Dispersive liquid-liquid microextraction coupled with pressure-assisted electrokinetic injection for simultaneous enrichment of seven phenolic compounds in water samples followed by determination using capillary electrophoresis

Offline dispersive liquid-liquid microextraction combined with online pressure-assisted electrokinetic injection was developed to simultaneously enrich seven phenolic compounds in water samples, followed by determination using capillary electrophoresis, namely phenol, 4-chlorophenol, pentachlorophenol, 2,4,6-trichlorophenol, 2,4-dichlorophenol, 2-chlorophenol, and 2,6-dichlorophenol. Several parameters affecting separation performance of capillary electrophoresis and the enrichment efficiency of pressure-assisted electrokinetic injection and dispersive liquid-liquid microextraction were systematically investigated. Under the optimal conditions, seven phenolic compounds were completely separated within 14 min and good enrichment factors were obtained of 61, 236, 3705, 3288, 920, 86, and 1807 for phenol, 4-chlorophenol, pentachlorophenol, 2,4,6-trichlorophenol, 2,4-dichlorophenol, 2-chlorophenol, and 2,6-dichlorophenol, respectively. Good linearity was attained in the range of 0.1-200 μg/L for 2,4-dichlorophenol, 0.5-200 μg/L for 4-chlorophenol, pentachlorophenol, 2,4,6-trichlorophenol, 2-chlorophenol, and 2,6-dichlorophenol, as well as 1-200 μg/L for phenol, with correlation coefficients (r) over 0.9905. The limits of detection and quantification ranging from 0.03-0.28 and 0.07-0.94 μg/L were attained. This two step enrichment method was potentially applicable for the rapid and simultaneous determination of phenolic compounds in water samples.

Analysis of Perfluorinated Compounds in Environmental Water Using Decyl-perfluorinated Magnetic Mesoporous Microspheres as Magnetic Solid-Phase Extraction Materials and Microwave-Assisted Derivatization Followed by Gas Chromatography-mass Spectrometry

In this work, a new method was developed for perfluorinated compounds (PFCs) analysis in water samples based on decyl-perfluorinated magnetic mesoporous nanocomposites microspheres-assisted extraction and microwave-assisted derivatization followed by gas chromatography-mass spectrometry analysis. The decyl-perfluorinated magnetic mesoporous nanocomposites have several advantages such as fast separation ability, good dispersibility in water sample and high selective preconcentration of PFCs. Various parameters, including eluting solvent and volume, the amounts of absorbents, extraction time and elution time, the microwave-assisted derivatization conditions were optimized. Validation studies showed that this method has good linearity (r2 > 0.9970), satisfactory precision (RSD < 7.8%) and high recovery (93-107%). The limits of detection were found to be 0.055-0.086 μg/L and the limits of quantification be 0.18-0.28 μg/L, respectively. The results indicated that the proposed method has advantages of convenience, good sensitivity and high efficiency. The method has been applied successfully to analyze perfluorinated organic acids in real water samples.

Solid-phase microextraction of volatile organic compounds in headspace of PM-induced MRC-5 cell lines

The exploration of volatile organic compounds (VOCs) produced by cell lines may be a powerful and non-invasive tool for the study of the health risk of human exposure to atmospheric particulate matter (PM). In this work, we developed a sensitive solid phase microextraction-gas chromatography-mass spectrometry method (SPME-GC-MS) to analyze VOCs in breathed gas of PM2.5-induced human embryonic fibroblast cell line (MRC-5). A novel graphene oxide/polyaniline/polydopamine (GO/PANI/PDA) coating was prepared on a stainless steel wire via electrochemical deposition and self-polymerization for the first time. The GO/PANI/PDA coating exhibited high extraction efficiency, good thermal stability (> 380 ℃), excellent mechanical stability as well as long service time (> 150 times). Parameters that may affect the results were optimized systematically. Under the optimal conditions, VOCs including benzene series, aldehydes and alkane were detected with low limit of detection (0.2-2.0 μg L^-1) and good correlation (correlation coefficients above 0.9922). The relative standard deviations of within-day and between-day were 1.1-8.4% and 0.2-11.2%, respectively. Satisfactory recoveries of 82-117% indicated good repeatability of the method. The method has been successfully applied for the determination of target VOCs in the headspace gas of PM2.5-induced MRC-5 cell. And it is expected to provide an alternative tool for the study of cytotoxicology of atmospheric particulates.

Assessment of graphene aerogel matrix solid-phase dispersion as sample preparation for the determination of chlorophenols in soil

Three-dimensional graphene aerogels (GAs) were synthesized by hydrothermal reduction and introduced as dispersing materials of matrix solid-phase dispersion for the determination of six chlorophenols in soil via high performance liquid chromatography.

Rapid magnetic solid-phase extraction of Congo Red and Basic Red 2 from aqueous solution by ZIF-8@CoFe2 O4 hybrid composites

Core-shell metal-organic framework materials have attracted considerable attention mainly due to their enhanced or new physicochemical properties compared with their single-component counterparts. In this work, a core-shell heterostructure of CoFe2 O4 -Zeolitic Imidazolate Framework-8 (ZIF-8@CoFe2 O4 ) is successfully fabricated and used as an solid-phase extraction adsorbent to efficiently extract Congo Red and Basic Red 2 dyes from contaminated aqueous solution. Vibrating sample magnetometry indicates that the saturated magnetization of ZIF-8@CoFe2 O4 is 3.3 emu/g, which is large enough for magnetic separation. The obtained hybrid magnetic metal-organic framework based material ZIF-8@CoFe2 O4 can remove the investigated dyes very fast within 1 min of the contact time. The adsorbent ZIF-8@CoFe2 O4 also shows a good reusability. After regeneration, the adsorbent can still exhibit high removal efficiency (∼97%) toward Congo Red for five cycles of desorption-adsorption. This work reveals the great potential of core-shell ZIF-8@CoFe2 O4 sorbents for the fast separation and preconcentration of organic pollutants in aqueous solution before high-performance liquid chromatography analysis.