Graphene-based pipette tip solid-phase extraction with ultra-high performance liquid chromatography and tandem mass spectrometry for the analysis of carbamate pesticide residues in fruit juice

Neonicotinoid insecticides in plant-derived Foodstuffs: A review of separation and determination methods based on liquid chromatography

Neonicotinoids (NEOs) are the most widely used insecticides globally. They can contaminate or migrate into foodstuffs and exert severe neonic toxicity on humans. Therefore, lots of feasible analytical methods were developed to assure food safety. Nevertheless, there is a lack of evaluation that the impacts of food attributes on the accurate determination of NEOs. This review aims to provide a comprehensive overview of sample preparation methods regarding 6 categories of plant-derived foodstuffs. Currently, QuEChERS as the common strategy can effectively extract NEOs from plant-derived foodstuffs. Various enrichment technologies were developed for trace levels of NEOs in processed foodstuffs, and multifarious novel sorbents provided more possibility for removing complex matrices to lower matrix effects. Additionally, detection methods based on liquid chromatography were summarized and discussed in this review. Finally, some limitations were summarized and new directions were proposed for better advancement.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

Reduced Graphene Oxide Aerogels Cartridges for Solid Phase Extraction of Benzotriazoles

UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes. This work evaluates the potential of novel reduced graphene oxide aerogels (rGO) as extractants of mixtures of three UV-benzotriazoles in water at low concentrations. These rGO aerogels incorporate graphenic domains into a tough structure of polymeric chains by adding graphene oxide during the synthesis of resorcinol-formaldehyde gels. Aerogels with a different content and ordering of graphenic domains were obtained and characterized using Raman, XRD, SEM and nitrogen adsorption isotherms (-196 °C). The rGO aerogels that performed better as solid phase extractants were those containing 60% rGO. Aerogels with lower rGO contents (40%) required a high-temperature (2000 °C) treatment to render competitive results. The SPE methodology using selected rGO aerogels was optimized by varying the elution solvent, elution time and volume. The best performances, i.e., recoveries of 80-100% and enrichment factors of 12.5-50, were accomplished when using 0.8 mL of tetrahydrofuran (THF) as an elution solvent. As a result, a fast (10 min) and simple extraction method of UV-benzotriazoles in water was attained, achieving a detection limit of 1 ng mL^-1. Selected aerogels were finally tested for the SPE of spiked samples of river waters, showing a similar performance to that observed with synthetic mixtures.

Determination of selected herbicides in sugarcane-derived foods by graphene-oxide based disposable pipette extraction followed by liquid chromatography-tandem mass spectrometry

Sugarcane is widely cultivated in Brazil. Although there are Maximum Residue Limits of pesticides determined for this plant, there is no legislation covering alimentary products from sugarcane. In this study, Disposable Pipette Tip Extraction (DPX) technique was evaluated as a sample preparation technique for simultaneous determination of eleven herbicides followed by LC-MS/MS analysis in three sugarcane-derived food matrices: juice, candy, and syrup. First, graphene oxide anchored to silica functionalized with octadecyl silane and endcapped was synthesized, which was evaluated as a sorbent in DPX. Then, after evaluating the parameters involved in DPX extraction, the method was validated following the ICH guide. As a result, the method showed acceptable linearity (r ≥ 0.99), limits of quantification (1.0 - 5.0 ng mL^-1 for juice and 5.0 - 25.0 ng g ^- 1 for candy and syrup, varying according to the pesticide), precision, and accuracy within the limits of the literature, and recoveries ranging from 48 - 69% (juice), 34 - 89% (candy), and 28 - 76% (syrup). Finally, the developed method was successfully applied in actual samples of the three studied matrices.

Porous organic framework as coating for stir bar sorptive extraction of carbamate pesticides from corn and potato samples

Three porous organic frameworks (POFs) were synthesized by the reaction between phloroglucinol and 1,4-phthalaldehyde, 4,4'-biphenyldialdehyde or tris-(4-formylphenyl) amine; the products are named as POF-a, POF-b and POF-c, respectively. They were used to prepare POFs coated stir bars respectively for the extraction of four carbamate pesticides (CMPs). POF-c coated stir bar exhibited better adsorption performance than POF-a/b coated stir bar and commercial stir bars, probably due to the stronger conjugated structure and hydrophobicity of POF-c, and resultant hydrophobic, π-π and hydrogen bonding interactions between them. The adsorption mechanism for target CMPs was verified by characterization techniques and molecular dynamics simulation. A method of POF-c coated stir bar sorptive extraction-high performance liquid chromatography-variable wavelength ultraviolet detector was developed for the analysis of four CMPs in corn and potato samples. Under the optimal conditions, LODs of the method were between 0.017 and 0.048 μg/L, and the linear range for four CMPs was 0.1/0.2-200 μg/L.

Dissipation Dynamics, Terminal Residues and Dietary Risk Assessment of Two Isomers of Dimethacarb in Rice by HPLC-MS/MS

Dimethacarb is a carbamate insecticide developed in China that contains 3,5-dimethylphenyl methylcarbamate (XMC) and 3,4-dimethylphenyl methylcarbamate (MPMC) isomers. Dimethacarb has been registered for use in rice in China, but no residue or degradation of dimethacarb in rice has been reported and the maximum residue limits (MRLs) for rice have not been established. A versatile high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method was developed with modified QuEChERS sample preparation to determine two isomers of dimethacarb in rice. The average recovery of XMC and MPMC in brown rice, rice husk, and rice straw ranged from 71.69 to 100.60%, with spike levels of 0.01 to 1 mg/kg and relative standard deviations (RSDs) of 0.21 to 8.41%. Field experiments showed that the half-lives of XMC and MPMC in rice straw were 4.08 to 4.23 days and 3.48 to 3.69 days, respectively. Final residues of XMC and MPMC in rice husk after 21 days of spraying at six sites ranged from 0.23-2.65 mg/kg and 0.06-1.10 mg/kg, and <0.01-0.16 mg/kg and <0.01-0.04 mg/kg in brown rice. The ratio of XMC to MPMC content in the rice husk differed from the original 50% dimethacarb EC, indicating the difference in the degradation rate of XMC and MPMC. The estimated risk quotient (RQ) for both XMC and MPMC was less than 30%. These data for residues from six representative locations could provide a reference for establishing the MRL of dimethacarb in rice.

Perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine as a sorbent for the extraction of fluorine-containing pesticides from water samples

Perfluoro octanoic acid was modified on the surface of magnetic hyperbranched polyamideamine by acid amine condensation. The morphology and chemical composition of perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine was characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential, particle size analysis, Brunauer-Emmett-Teller measurement, and X-ray photoelectron spectroscopy. Perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine was applied in magnetic solid phase extraction for the separation and enrichment of four fluorine-containing pesticides (indoxacarb, metaflumizone, cyflumetofen, and cyhalothrin). The magnetic solid phase extraction method based on perfluoro octanoic acid-modified magnetic hyperbranched polyamideamine has low method detection limits (0.30-0.49 μg/L), a satisfactory coefficient of determination (0.9995-0.9999), wide linear ranges (2.5-250 μg/L), and good repeatability (intraday: 2.6-4.7%; interday: 1.1-7.9%). The enrichment factors and extraction efficiences varied from 55 to 76 and 69 to 96%, respectively. The sorbent-to-sorbent reproducibility was in the range of 3.2-7.6%, indicating that the synthesis of the sorbent was reliable. For the detection of actual water samples, the relative recoveries were in the range from 80.1 to 114.4% with relative standard deviations less than 9.6%. The calculation results of quantum chemistry calculations showed that after the modification of perfluoro octanoic acid, the interaction between the sorbent and four fluorine-containing pesticides was stronger.

Rational hapten design to produce high-quality antibodies against carbamate pesticides and development of immunochromatographic assays for simultaneous pesticide screening

Carbamate pesticides (CPs) are the most used pesticides in agricultural production and pest control. In this study, carbofuran, isoprocarb and carbaryl were employed as models, and a general hapten strategy based on carbamate moiety recognition was proposed. Molecular modeling of the three-dimensional (3D) structure and surface electrostatic potential of the CPs indicated that the amide group formed by conjugation significantly influenced recognition by antibodies. The proposed strategy was used to obtain three sensitive and specific monoclonal antibodies (mAbs) with IC₅₀ values of 1.4 ng/mL, 8.4 ng/mL and 13.8 ng/mL for carbofuran, isoprocarb and carbaryl, respectively. Negligible cross-reactivity (%) with analogs was observed, except for fenobucarb (84.6%) for isoprocarb. The obtained antibodies were used to develop an immunochromatographic assay (ICA) to simultaneously and quantitatively detect the three CPs. A strip reader was used to determine the limits of quantitation (LOQs) as 0.05 ng/mL (carbofuran), 31.3 ng/mL (isoprocarb) and 31.3 ng/mL (carbaryl). The recoveries of cucumber and Chinese cabbage samples ranged from 76% to 111%, with CVs from 1.3% to 10.6%, indicating good potential for the rapid simultaneous detection of multiple pesticide residues in a large batch of samples.

Neonicotinoid insecticide and their metabolite residues in fruit juices: Implications for dietary intake in China

Neonicotinoid insecticides (NEOs) have become the most widely used insecticides worldwide, and they are ubiquitous in food (i.e., fruit juices). In the present study, occurrence of seven NEOs and four metabolites (m-NEOs) in 400 fruit juice samples were investigated. NEOs and m-NEOs were frequently detected (65%-86%) in fruit juice samples. The median residues of NEOs and m-NEOs were ranged from 0.06 ng/mL to 0.94 ng/mL. Seasonal variations in NEOs and m-NEOs in fruit juices were found, indicating that the target analyte residues during the dry season were remarkably higher than those of residues during wet season. The relative potency factor (RPF) method was used to integrate individual NEOs into a single metric [imidacloprid (IMI_RPF)] representing the intakes of IMI equivalent to total NEOs for each fruit juice sample. The estimated daily intake (EDI) of total NEOs for the general Chinese population was obtained. The median IMI_RPF for total fruit juices was 13.4 ng/g, and the median EDI of NEOs was 18.2 ng/kg bw/day for the general population. Although the EDIs in this study were considerably lower than the acceptable daily intake (60 μg/kg bw/day, ADI), the dietary exposure risks for total NEOs should not be ignored because of the increasing usage of NEOs and their ubiquitous presence in fruit juices in China. To the best of our knowledge, this report was the first time to document residues of NEO and m-NEO in fruit juice samples collected from China.

Determination of Nitrofuran Metabolites in Fish by Ultraperformance Liquid Chromatography-Photodiode Array Detection with Thermostatic Ultrasound-Assisted Derivatization

Nitrofuran (NF) is a class of broad-spectrum antibiotics that are used illegally in animal feeding. NF and its metabolites have proven to pose potential risk to human health. To address the current analytical needs to quantify low levels of NF metabolites in animal foods, a sensitive method was developed for simultaneous detection of four NF metabolites in fish products by an ultraperformance liquid chromatography-diode array detector (UPLC-DAD). With 2-nitrobenzaldehyde (2-NBA) as the derivatizing reagent, the metabolites were hydrolyzed and derivatized under the assistance of thermostatic ultrasound. Compared with the current detection methods, the time of the derivatization reaction has been shortened from 16 to 2 h. The relative coefficient of four NF metabolite derivatives reached more than 0.998, with excellent linear relationship. The limits of detection (LODs) and limits of quantification (LOQs) of six repeated determinations reached 0.25-0.33 and 0.80-1.10 μg/kg, respectively. For all four NF metabolites, the limit of detection of the method was below the minimum required performance limit (MRPL) of 1.0 μg/kg, which makes it compatible with the EU requirements. The recoveries ranging from 89.8 to 101.9% with relative standard deviation below 6.5% were obtained for all of the NF metabolites. What's more, this method was successfully applied for the determination of four NF metabolites in the fish products. As a promising approach, this method could also be extended for the quantitation of NF metabolites in aquaculture and poultry products.

Green Approaches to Sample Preparation Based on Extraction Techniques

Preparing a sample for analysis is a crucial step of many analytical procedures. The goal of sample preparation is to provide a representative, homogenous sample that is free of interferences and compatible with the intended analytical method. Green approaches to sample preparation require that the consumption of hazardous organic solvents and energy be minimized or even eliminated in the analytical process. While no sample preparation is clearly the most environmentally friendly approach, complete elimination of this step is not always practical. In such cases, the extraction techniques which use low amounts of solvents or no solvents are considered ideal alternatives. This paper presents an overview of green extraction procedures and sample preparation methodologies, briefly introduces their theoretical principles, and describes the recent developments in food, pharmaceutical, environmental and bioanalytical chemistry applications.

Materials for Solid-Phase Extraction of Organic Compounds

This review provides an overview of the most recent developments involving materials for solid-phase extraction applied to determine organic contaminants. It mainly concerns polymer-based sorbents that include high-capacity, as well as selective sorbents, inorganic-based sorbents that include those prepared using sol-gel technology along with structured porous materials based on inorganic species, and carbon nanomaterials, such as graphene and carbon nanotubes. Different types of magnetic nanoparticles coated with these materials are also reviewed. Such materials, together with their main morphological and chemical features, are described, as are some representative examples of their application as solid-phase extraction materials to extract organic compounds from different types of samples, including environmental water, biological fluids, and food.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.

A hierarchically porous composite monolith polypyrrole/octadecyl silica/graphene oxide/chitosan cryogel sorbent for the extraction and pre-concentration of carbamate pesticides in fruit juices

A hierarchically porous structured composite monolith sorbent of polypyrrole-coated graphene oxide and octadecyl silica incorporated in chitosan cryogel (PPY/GOx/C18/chitosan) was synthesized and used as solid-phase extraction sorbent for the determination of carbamate pesticides. Various factors affecting the characteristics of the adsorbents (chemistry of the sorbent, polymerization time, concentrations of graphene oxide and octadecyl silica) and the extraction efficiency using the prepared sorbents, such as sample loading, desorption conditions, sample volume, sample flow rate, sample pH, and ionic strength, were investigated and optimized. Under the optimal conditions of sorbent preparation and extraction, the developed composite monolith sorbent provided wide linear responses from 1.0 to 500 μg L^-1 for carbofuran and diethofencarb, from 0.5 to 500 μg L^-1 for carbaryl, and from 2.0 to 500 μg L^-1 for isoprocarb. The limits of detection using HPLC-UV at 203, 220, and 208 nm were in the range of 0.5-2.0 μg L^-1. When the composite monolith sorbent was applied for the pre-concentration and determination of carbamate in fruit juices, good recoveries (84.1-99.5%) were achieved. The developed sorbents were porous and exhibited low back pressure enabling their use at high flow rates during sample loading. Extraction and clean-up were highly efficient, and the good physical and chemical stability of the sorbent enables reuse up to 13 times. Graphical abstract ᅟ.

The Potential of Graphene as an Adsorbent for Five Pesticides from Different Classes in Rape Oil Samples Using Dispersive Solid-Phase Extraction

Isolation conditions for five pesticides (metazachlor, tebuconazole, λ-cyhalothrin, chlorpyrifos, and deltamethrin) from rape oil samples were examined using the dispersive solid-phase graphene extraction technique. To determine the optimal extraction conditions, a number of experimental factors (amount of graphene, amount of salt, type and volume of the desorbing solvent, desorption time with and without sonication energy, and temperature during desorption) were studied. The compounds of interest were separated and detected by an HPLC-UV employing a Kinetex XB-C18 column and a mobile phase consisting of acetonitrile and water flowing in a gradient mode. The optimized extraction conditions were: the amount of graphene 15 mg, desorbing solvent (acetonitrile) 5 mL, time desorption 10 min at 40°C, and amount of NaCl 1 g. The detection limit for metazachlor, tebuconazole, λ-cyhalothrin, and chlorpyrifos was 62.5 ng·g^-1, and for deltamethrin, it was 500 ng·g^-1. The obtained results lead to the conclusion that graphene may be successfully used for the isolation of the five pesticides from rape oil. However, their determination at low concentration levels, as they occur in real oil samples, requires the employment of appropriately highly sensitive analytical methods, as well as a more suitable graphene form (e.g., magnetically modified graphene).

Magnetic graphene coated inorganic-organic hybrid nanocomposite for enhanced preconcentration of selected pesticides in tomato and grape

The new magnetic graphene based hybrid silica-N-[3-(trimethoxysilyl)propyl]ethylenediamine (MG@SiO₂-TMSPED) nanocomposite was synthesized via sol-gel process, and used as an effective adsorbent in magnetic solid phase extraction (MSPE) of three selected pesticides followed by gas chromatography micro-electron capture detection (GC-μECD). The adsorbent was characterized using Fourier transform-infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDXS) techniques. The analytical validity of the developed method was evaluated under optimized conditions and the following figures of merit were obtained: linearity, 1-20μgkg^-1 with good determination coefficients (R²=0.995-0.999); limits of detection (LODs), 0.23-0.30μgkg^-1 (3×SD/m, n=3); and limits of quantitation (LOQ), 0.76-1.0μgkg^-1 (10×SD/m, n=3). The precision (RSD%) of the proposed MSPE method was studied based on intra-day (3.43-8.83%, n=3) and inter-day (6.68-8.37%, n=12) precisions. Finally, the adsorbent was applied to determination of pesticides in tomato and grape samples and good recoveries were obtained in the range from 82 to 113% (RSDs 5.1-8.1%, n=3).

Zinc sulfide nanosheets as a novel solid-phase extraction material for flavonoids

As a novel solid-phase extraction material, zinc sulfide nanosheets were prepared by a simple method and were used to extract flavonoids. We used scanning electron microscopy to show its nanosheet morphology and energy dispersive X-ray spectroscopy and powder X-ray diffraction to confirm its chemical and phase compositions. Coupled to a high-performance liquid chromatography, the zinc sulfide nanosheets were packed into a microcolumn and were used to extract four model flavonoids to examine their extraction ability. The parameters of sample loading and elution were investigated. Under optimized conditions, the analytical method for flavonoids was established. For the method, wide linearities from 1 to 250 μg/L and low limits of detection from 0.25 to 0.5 μg/L were obtained. The relative standard deviations for single column repeatability and column to column reproducibility were less than 7.7 and 10.4%, respectively. The established method was also used to analyze two real samples and the recoveries from 88.7 to 98.2% further proved the reliability of the method. Moreover, the zinc sulfide nanosheets have good stability and that in one column can be reused for more than 50 times. This work proves that the prepared zinc sulfide nanosheets are a good candidate as the flavonoids sorbent.