Magnetic graphene oxide modified by imidazole-based ionic liquids for the magnetic-based solid-phase extraction of polysaccharides from brown alga

A guide to the use of bioassays in exploration of natural resources

Bioassays are the main tool to decipher bioactivities from natural resources thus their selection and quality are critical for optimal bioprospecting. They are used both in the early stages of compounds isolation/purification/identification, and in later stages to evaluate their safety and efficacy. In this review, we provide a comprehensive overview of the most common bioassays used in the discovery and development of new bioactive compounds with a focus on marine bioresources. We present a comprehensive list of practical considerations for selecting appropriate bioassays and discuss in detail the bioassays typically used to explore antimicrobial, antibiofilm, cytotoxic, antiviral, antioxidant, and anti-ageing potential. The concept of quality control and bioassay validation are introduced, followed by safety considerations, which are critical to advancing bioactive compounds to a higher stage of development. We conclude by providing an application-oriented view focused on the development of pharmaceuticals, food supplements, and cosmetics, the industrial pipelines where currently known marine natural products hold most potential. We highlight the importance of gaining reliable bioassay results, as these serve as a starting point for application-based development and further testing, as well as for consideration by regulatory authorities.

Ionic liquid-based magnetic nanoparticles for magnetic dispersive solid-phase extraction: A review

Due to their highly tunable nature and outstanding physicochemical properties, ionic liquids (ILs) have been widely reported for use in the synthesis of multitudinous magnetic nanoparticles (MNPs). IL-based magnetic nanoparticles (IL-MNPs) have great potential in magnetic dispersive solid-phase extraction (MDSPE). At present, IL-MNPs have been successfully applied in the pretreatment of MDSPE samples from medicines, pesticides, veterinary drugs, heavy metals, dyes, additives, and proteins in agricultural products, foods and beverages, environmental water, and biological samples. In this review, the preparation of IL-MNPs and their application in MDSPE are comprehensively summarized. The structural characteristics of the introduced ILs used to prepare the IL-MNPs and the synthetic routes employed to obtain the IL-MNPs are described, including physical coating and chemical bonding methods. The IL-MNPs are then classified and described according to different modified materials, including silica-based materials, carbon-based materials, metal-organic frameworks, molecularly imprinted polymers and other interesting large/small molecules. Finally, the research prospects and development directions of IL-MNPs in the context of MDSPE are further identified.

Magnetic Solid-Phase Extraction Based on Magnetic Sulfonated Reduced Graphene Oxide for HPLC-MS/MS Analysis of Illegal Basic Dyes in Foods

In this study, a magnetic solid-phase extraction (MSPE) method coupled with High-Performance Liquid Chromatography Mass Spectrometry (HPLC–MS/MS) for the determination of illegal basic dyes in food samples was developed and validated. This method was based on Magnetic sulfonated reduced graphene oxide (M-S-RGO), which was sensitive and selective to analytes with structure of multiaromatic rings and negatively charged ions. Several factors affecting MSPE efficiency such as pH and adsorption time were optimized. Under the optimum conditions, the calibration curves exhibited good linearity, ranging from 5 to 60 µg/g with correlation coefficients >0.9950. The limits of detection of 16 basic dyes were in the range of 0.01–0.2 µg/L. The recoveries ranged from 70% to 110% with RSD% < 10%. The results indicate that M-S-RGO is an efficient and selective adsorbent for the extraction and cleanup of basic dyes. Due to the MSPE procedures, matrix effect and interference were eliminated in the analysis of HPLC–MS/MS without the matrix-matched standards. Thus, validation data showed that the proposed MSPE–HPLC–MS/MS method was rapid, efficient, selective, and sensitive for the determination of illegal basic dyes in foods.

Iron nanoparticles decorated hierarchical carbon fiber forest for the magnetic solid-phase extraction of multi-pesticide residues from water samples

This study describes a versatile, robust and fast sample pre-concentration novel method based on chemical vapour deposition grown iron nanoparticles dispersed hierarchical carbon fiber forest (Fe-ACF/CNF) for the determination of multi-pesticide residue in water samples. This method was developed by the implementation of Fe-ACF/CNF to magnetic solid-phase extraction method (MSPE) for the adsorption of twenty-nine pesticides of various classes using gas chromatography equipped with an electron capture detector. Fe-ACF/CNF was grown via tip growth mechanism and Fe-nanoparticles are moved to the tip of CNF. The presence of Fe-nanoparticles is responsible for the magnetic property of proposed adsorbents. The Fe-ACF/CNF is competent enough to extract twenty-nine pesticides of different physico-chemical characteristics from water samples. All the predominant parameters including the amount of sorbent desorption time, temperature, sonication effect, regeneration, and reusability of Fe-ACF/CNF were thoroughly investigated. Acceptable linearity was obtained in the range of 20-500 μg/L with a correlation coefficient value ≥ 0.990 for all pesticides. The accuracy of the developed method was evaluated and the obtained recovery of the spiked samples was within 70-120% (standard deviation ≤ 15%) and reusability up to the 4th cycle. The limit of detection and quantification values was in the range of 1.44-5.15 and 4.76-17.0 μg/L, respectively. The obtained results are also cross verified with real water samples from the Gomti river (Lucknow, India) and shown the excellent extraction efficiency of Fe-ACF/CNF.

Magnetic solid-phase extraction based on multi-walled carbon nanotubes combined ferroferric oxide nanoparticles for the determination of five heavy metal ions in water samples by inductively coupled plasma mass spectrometry

An excellent magnetic multi-walled carbon nanotubes (MMWCNT) containing carboxyl material modified with ferroferric oxide (Fe₃O₄) nanoparticles was synthesized as the adsorbent for magnetic solid-phase extraction (MSPE) of five heavy metal ions (Pb²⁺, Cu²⁺, Co²⁺, Cd²⁺, Cr⁴⁺) in water samples followed by on-line inductively coupled plasma mass spectrometry (ICP-MS) detection. The characteristics of the adsorbent were analyzed using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). Some factors affecting extraction efficiency including pH of sample solution, the amount of adsorbent, extraction method and time, concentration and volume of desorption solvent, desorption time and evaluation of coexisting ions were optimized. Under the optimum conditions, good linearity (r ≥ 0.9951) was obtained within the range of 0.1-50.0 ng·mL^-1. The limits of detection (LODs) and limits of quantification (LOQs) were 4.0-25.0 ng·L^-1 and 15.0-80.0 ng·L^-1, respectively. And satisfactory recoveries of five heavy metal ions ranged from 81.11% to 105.53% were acquired, and the relative standard deviations (RSDs) were no more than 6.05%. The MMWCNT synthesized had strong adsorption force for the five investigated heavy metal ions, respectively. Hence, the proposed method was so suitable and sensitive that it can be applied to the determination of trace analysis of heavy metals in water samples.

Preparation of porous polymers based on high internal phase emulsion for enrichment of estrogens in urine

In this work, graphene oxide-hybridized high internal emulsion polymers with crosslinking and open-cell structure was prepared and applied for separation and enrichment of estrogens. The prepared graphene oxide-hybridized high internal emulsion polymer monoliths had hydrophobicity, porosity and stability, which were just obtained by one step in-situ emulsion polymerization of 2-ethylhexyl acrylate, glycidyl methacrylate, and divinylbenzene after doping with graphene oxide. Benefit from the advantages of its unique character, the graphene oxide-hybridized high internal emulsion polymers monolith with low background pressure (85 kPa) and high mechanical strength could be applied for efficient separation for trace estrogens in urine. Under the optimized condition, trace estrogens, including estrone, estradiol, and diethylstilbestrol in urine, were detected by high-performance liquid chromatography, all the sample preparation process were carried out in 15 min, the recovery rate was ranged from 85.0 to 106.0% and the relative standard deviation was less than 4.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

Role of Ionic Liquids in Composites in Analytical Sample Preparation

Ionic liquids (ILs) are a group of non-conventional salts with melting points below 100 °C. Apart from their negligible vapor pressure at room temperature, high thermal stability, and impressive solvation properties, ILs are characterized by their tunability. Given such nearly infinite combinations of cations and anions, and the easy modification of their structures, ILs with specific properties can be synthesized. These characteristics have attracted attention regarding their use as extraction phases in analytical sample preparation methods, particularly in liquid-phase extraction methods. Given the liquid nature of most common ILs, their incorporation in analytical sample preparation methods using solid sorbents requires the preparation of solid derivatives, such as polymeric ILs, or the combination of ILs with other materials to prepare solid IL-based composites. In this sense, many solid composites based on ILs have been prepared with improved features, including magnetic particles, carbonaceous materials, polymers, silica materials, and metal-organic frameworks, as additional materials forming the composites. This review aims to give an overview on the preparation and applications of IL-based composites in analytical sample preparation in the period 2017–2020, paying attention to the role of the IL material in those composites to understand the effect of the individual components in the sorbent.

Enhanced removal of As(Ⅲ) and As(Ⅴ) from aqueous solution using ionic liquid-modified magnetic graphene oxide

In this study, ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆])-modified magnetic graphene oxide (MGO-IL) was prepared for the first time, and was used to adsorb and remove arsenic (As(Ⅲ) and As(V)) ions from aqueous solution. MGO-IL was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and magnetization curves. Effects of ionic liquid type, solution pH, initial arsenic concentration and contact time on the adsorption performance of MGO-IL for As(Ⅲ) and As(V) were studied. The experimental results showed that the adsorption equilibrium was achieved within 30 min, with maximum adsorption capacities of 160.65 mg g^-1 for As(Ⅲ) and 104.13 mg g^-1 for As(V), respectively, and MGO-IL could be rapidly isolated from solution by applying a magnetic field. MGO-IL was reused for 5 times, without marked decrease in its adsorption capacities. Moreover, common coexisting anions did not interfere with the absorption of As(Ⅲ) and As(V). Compared with MGO, the sorption quantities of MGO-IL for As(Ⅲ) and As(V) were greatly enhanced, and the equilibrium time was significantly reduced. Therefore, MGO-IL can potentially serve as an excellent adsorbent for the simultaneous separation and removal of As(Ⅲ) and As(V) from water.

Magnetic mesoporous nanoparticles modified with poly(ionic liquids) with multi-functional groups for enrichment and determination of pyrethroid residues in apples

Considering that the determination of pyrethroid residues is of value for the safety of food, a new poly(ionic liquid)-functionalized magnetic mesoporous nanoparticle was designed and used as an adsorbent in magnetic solid-phase extraction for the enrichment of eight pyrethroids. The porous structure and large surface area of the mesoporous silica shell endow the adsorbent with abundant binding sites. In contrast to the reported poly(ionic liquids) with only one kind of functional group in the cationic part, the new poly(ionic liquids) with mixed cyano and phenyl groups in cationic part matched the chemical structure of the analytes to improve extraction efficiency. Under the optimum conditions, an effective method was established for the determination of eight pyrethroids in apples. Adsorption equilibrium can be quickly reached in 1 min, greatly decreasing the extraction time. The linearity range was found to be 10-200 ng/g, and the detection limits ranged from 0.24 to 1.99 ng/g. Recoveries of analytes in apple samples ranged from 87.3 to 119.0%, with relative standard deviations varying in the range of 3-21.2% (intraday) and 0.3-15.2% (interday). The results indicate that the proposed method is a good candidate for pyrethroid residues in apple samples.

Hydrophobic ionic liquid modified thermoresponsive molecularly imprinted monolith for the selective recognition and separation of tanshinones

A hydrophobic ionic liquid modified thermoresponsive molecularly imprinted monolith was synthesized using N-isopropylacrylamide as a thermoresponsive monomer and a long-chain hydrophobic ionic liquid as an auxiliary modification monomer. The ionic-liquid-modified thermoresponsive molecularly imprinted polymer was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. When the column temperature was 50°C, the synthesized monolithic column was successfully applied to the selective separation of homologue tanshinones within 7 min and eluted only by water (mobile phase) (theoretical plates more than 1.00 × 10⁵ per meter). The negative Gibbs free energy (≤-2.37) values showed that the transfer of the tanshinones from the mobile phase to the stationary phase on this monolithic column was a thermodynamically spontaneous process. Good linearity of the five tanshinones by thermoresponsive monolith was obtained in the range of 0.100-25.0 μg/mL. The limit of detection (S/N = 3) and limit of quantitation (S/N = 10) were less than 0.0390 and 0.0630 μg/mL, respectively, with a relative standard deviation of <4.8%. In this proposed thermoresponsive chromatography method, the separation of homologue analytes can be achieved by changing the column temperature, and the use of water as the mobile phase would decrease the economic cost and organic pollution.