Photoirradiation surface molecularly imprinted polymers for the separation of 6-O-α-d-maltosyl-β-cyclodextrin

A novel surface molecularly imprinted polymer based on the natural biological macromolecule sporopollenin for the specific and efficient adsorption of resveratrol from Polygonum cuspidatum extracts

Sporopollenin is a natural biological macromolecule consisting of highly cross-linked carbon, hydrogen, and oxygen atoms, with a highly porous structure and multifunctional groups. In this work, a novel surface molecularly imprinted polymer based on magnetically aminated cattail sporopollenin (MACSp-SMIP) was prepared for the specific and efficient adsorption of resveratrol, with the aim of purifying resveratrol from Polygonum cuspidatum extracts. MACSp-SMIP was found to have a porous structure covered with the multi-layered sponge-like imprinted polymers. MACSp-SMIP had a high adsorption capacity for resveratrol (65.77 mg·g-1) and excellent selectivity (imprinting factor 5.64). The adsorption of resveratrol by MACSp-SMIP was a homogeneous diffusion dominated by chemical adsorption with three stages of external diffusion, internal diffusion, and micropore diffusion. MACSp-SMIP was used as an adsorbent in molecularly imprinted solid-phase extraction for the purification of resveratrol from P. cuspidatum extracts, achieving a resveratrol recovery of 94.33 % and a purity of 76.67 % in the final products. MACSp-SMIP maintained a satisfactory recovery of resveratrol (88.18 %) after six cycles. Overall, this work developed a promising biological macromolecule-based adsorbent MACSp-SMIP for the specific and efficient adsorption of resveratrol, and also provided an efficient and simple approach for the selective purification of resveratrol from P. cuspidatum extracts for food/nutraceutical applications.

High selectivity molecularly imprinted polymer based on short amylose as bio-based functional monomers for selective extraction of λ-cyhalothrin

Nowadays, the development of sustainable molecularly imprinted polymers (MIPs) with high selectivity is still challenging due to the limitations of bio-based functional monomers. In this study, the highly selective and porous MIPs (LC-TMIPs) were designed and prepared on short amylose (SAM) as bio-based functional monomers, λ-cyhalothrin (LC) as a template molecule, and tetrafluoroterephthalonitrile as a rigid crosslinking agent. Static, dynamic, and selective adsorption experiments were conducted to investigate the adsorption performance. The results indicated that, compared to MIPs prepared using epichlorohydrin as flexible crosslinking agents, LC-TMIPs exhibited higher imprinting factor (3.93), selectivity (5.78), and adsorption capacity (35.79 mg g-1), as well as faster adsorption/desorption kinetics. The LC-TMIPs were used as sorbents for the selective determination of LC in both apple and cucumber samples by high-performance liquid chromatography. Under the optimal extraction conditions, the recoveries of the method reached 92.1-106.1 %, with a linear range of 1.5-30 ng g-1 and a detection limit of 0.5 ng g-1. The proposed preparation method of LC-TMIPs is expected to open a new way to prepare highly selective and sustainable MIPs for hydrophobic compounds.

Preparation of biochar-based surface molecularly imprinted polymers and evaluation of their selective adsorption and removal of carbaryl from rice and corn

The residue of carbaryl in food is a threat to human health. In this study, activated soybean shell biochar (A-SBC) was used as a carrier, methacrylic acid (MAA) was used as a functional monomer, and carbaryl was used as a template molecule to synthesize the activated biochar surface molecularly imprinted polymer (A-SBC@MIP). The synthesized A-SBC@MIP was characterized by SEM, FT-IR, XRD and XPS techniques, and then applied as adsorbent for carbaryl removal. The adsorption capacity of A-SBC@MIP for carbaryl was 8.6 mg‧g-1 and the imprinting factor was 1.49 at the optimum ionic strength and pH. The kinetic and isothermal data indicated that it had fast mass transfer rate and high binding capacity(Qmax=47.9 mg‧g-1). A-SBC@MIP showed good regenerative properties and the adsorption of carbaryl was excellent in its structural analogues. A solid-phase extraction (SPE) column composed of A-SBC@MIP was developed for the detection of rice and corn under optimized conditions, with recoveries of 93-101% for the spiked carbaryl. The limit of detection (LOD) of the method was 3.6 μg‧kg-1 with good linearity (R2=0.994) in the range of 0.01-5.00 mg‧L-1. The results show that the developed MIPs-SPE can enrich carbaryl from food samples as a specific and cost-effective method.

Synthesis of Mesoporous Silica Imprinted Salbutamol with Two TEOS/MTES Ratio Compositions through the Direct Incorporation Method for Salbutamol Separation

Molecularly imprinted mesoporous silica (MIPMS) is one of the methods to improve site accessibility molecule target on molecularly imprinted polymer (MIP) for application in solid-phase extraction (SPE). The MIPMS was prepared using salbutamol sulfate as template molecule, cetyltrimethylammonium bromide as a directing agent, and tetraethyl orthosilicate and methyltriethoxysilane were used as silica precursor and organosilane. In this study, two TEOS : MTES ratios were used. The MIPMS-2 with 3 : 1 ratio of TEOS : MTES has better analytical performance than the MIPMS-1 with 2 : 1 ratio of TEOS : MTES. The adsorption capacity of MIPMS-2 was about 0.0934 mg/g, and it was 0.0407 mg/g for NIPMS-2. The extraction ability of MIPMS-2 was good, with a recovery of about 104.79% ± 1.01% of salbutamol in spiked serum. The imprinting factor (IF) value obtained is 1.2. When serum was spiked with salbutamol and terbutaline, the ability of NIPMS-2 to recognize salbutamol increased. Therefore, optimizing the conditions for the MIPMS synthesis is necessary to produce a sorbent with better selectivity.

Application of starch-based nanoparticles and cyclodextrin for prebiotics delivery and controlled glucose release in the human gut: a review

Starches are a major constituent of staple foods and are the main source of energy in the human diet (55-70%). In the gastrointestinal tract, starches are hydrolyzed into glucose by α-amylase and α-glucosidase, which leads to a postprandial glucose elevation. High levels of blood glucose levels over sustained periods may promote type 2 diabetes mellitus (T2DM) and obesity. Increasing consumption of starchy foods with a lower glycemic index may therefore contribute to improved health. In this paper, the preparation and properties of several starch-based nanoparticles (SNPs) and cyclodextrins (CDs) derivatives are reviewed. In particular, we focus on the various mechanisms responsible for the ability of these edible nanomaterials to modulate glucose release and the gut microbiome in the gastrointestinal tract. The probiotic functions are achieved through encapsulation and protection of prebiotics or bioactive components in foods or the human gut. This review therefore provides valuable information that could be used to design functional foods for improving human health and wellbeing.

A comparative study of photoresponsive molecularly imprinted polymers with different shell thicknesses: Effects on 6-O-α-maltosyl-β-cyclodextrin separation

Photoresponsive surface molecularly imprinted polymers (PSMIPs) with controlled nanoshell thicknesses were synthesized using different amounts of precursor materials to determine the effects of polymer shell layer thickness on the separation and purification of 6-O-alpha-maltosyl-beta-cyclodextrin (Mal-β-CD). The physicochemical properties and adsorption and desorption capacities of PSMIPs with different shell thicknesses were studied. Interestingly, the uniform thickness of the imprinted polymer shell layer could be adjusted from 10 to 60 nm by varying the amount of polymerization precursors, and the average mesopore diameter of PSMIPs was not significantly affected by shell thickness. However, the removal efficiency and selective capacity of PSMIPs on Mal-β-CD were strongly correlated to their shell thickness. The adsorption behavior of PSMIPs on Mal-β-CD fitted well with the Langmuir adsorption model and pseudo-second-order kinetic model. Based on the obtained results, PSMIPs with a 30-nm imprinted layer were found to be an excellent adsorbent for Mal-β-CD separation, with an adsorption capacity of 18.12 mg/g. They can therefore be used for industrial chromatographic separations of Mal-β-CD in the future. PRACTICAL APPLICATION: This article clearly demonstrated that the shell thickness of core-shell molecularly imprinted materials affected the degree and rate of cyclodextrin separation. Determining the optimal thickness is of great significance for the material in the separation and purification of cyclodextrin.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.