Comparisons of glyphosate adsorption properties of different functional Cr-based metal-organic frameworks

Ultra-thin FeCoNi-LDH hollow nanoflower as solid-phase microextraction coating for targeted capture of six pesticides by electrostatic adsorption

Pesticides are common pollutants that cause detriment to the ecological environmental safety and health of human due to their toxicity, volatility and bioaccumulation. In this work, an ultra-thin polymetallic layered double hydroxide (FeCoNi-LDH) with hollow nanoflower structure composite was synthesized using ZIF-67 as a self-sacrificial template, which was used as solid-phase microextraction (SPME) coating for the targeted capture pesticides, which could be combined with high-performance liquid chromatography (HPLC) to sensitive inspection pesticides in real water samples. Orthogonal experimental design (OAD) was applied to ensure the best SPME condition. Additionally, the adsorption properties were evaluated by chemical thermodynamics and kinetics. Under the optimized conditions, high adsorption capacity was obtained (117.0-21.5 mg g-1). A wide linear range (0.020-1000.0 μg L-1), low detection limit (0.008-0.172 μg L-1) and excellent reproducibility were obtained under the established method. This research provided a new strategy for designing hollow materials with multiple cations for the adsorption of anion or organic pollutants.

Sustainable approach for the expulsion of metaldehyde: risk, interactions, and mitigation: a review

All pests can be eliminated with the help of pesticides, which can be either natural or synthetic. Because of the excessive use of pesticides, it is harmful to both ecology and people's health. Pesticides are categorised according to several criteria: their chemical composition, method of action, effects, timing of use, source of manufacture, and formulations. Many aquatic animals, birds, and critters live in danger owing to hazardous pesticides. Metaldehyde is available in various forms and causes significant impact even when small amounts are ingested. Metaldehyde can harm wildlife, including dogs, cats, and birds. This review discusses pesticides, their types and potential environmental issues, and metaldehyde's long-term effects. In addition, it examines ways to eliminate metaldehyde from the aquatic ecosystem before concluding by anticipating how pesticides may affect society. The metal-organic framework and other biosorbents have been appropriately synthesized and subsequently represent the amazing removal of pesticides from effluent as an enhanced adsorbent, such as magnetic nano adsorbents. A revision of the risk assessment for metaldehyde residuals in aqueous sources is also attempted.

Microorganisms@aMIL-125 (Ti): An Amorphous Metal-Organic Framework Induced by Microorganisms and Their Applications

Amorphous metal-organic framework (aMOF)-based materials have attracted considerable attention as an emerging class of nanomaterials. Herein, novel microorganisms@aMIL-125 (Ti) composites including yeast@aMIL-125 (Ti), PCC 6803@aMIL-125 (Ti), and Escherichia coli@aMIL-125 (Ti) composites were respectively synthesized by self-assembling aMOFs on the microorganisms' surface. The functional groups on the microorganisms' surface induced structural defects and participated in the formation of aMIL-125 (Ti) composites. Finally, the application of microorganisms@aMIL-125 (Ti) composites for the removal of glyphosate from aqueous solution was selected as a model reaction to illustrate their potential for environmental protection. The present method is not only economical but also has other advantages including ease of operation, environmentally friendly assay, and high adsorption. The maximum adsorption capacity of aMIL-125 (Ti) was 1096.25 mg g^-1, which was 1.74 times that of crystalline MIL-125 (Ti). Therefore, the microorganisms@aMOFs composites will have broad application prospects in energy storage, drug delivery, catalysis, adsorbing toxic substances, sensing, encapsulating and delivering enzymes, and in other fields.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Metal-Organic Frameworks as Potential Agents for Extraction and Delivery of Pesticides and Agrochemicals

Pesticide contamination is a global issue, affecting nearly 44% of the global farming population, and disproportionately affecting farmers and agricultural workers in developing countries. Despite this, global pesticide usage is on the rise, with the growing demand of global food production with increasing population. Different types of porous materials, such as carbon and zeolites, have been explored for the remediation of pesticides from the environment. However, there are some limitations with these materials, especially due to lack of functional groups and relatively modest surface areas. In this regard, metal-organic frameworks (MOFs) provide us with a better alternative to conventionally used porous materials due to their versatile and highly porous structure. Recently, a number of MOFs have been studied for the extraction of pesticides from the environment as well as for targeted and controlled release of agrochemicals. Different types of pesticides and conditions have been investigated, and MOFs have proved their potential in agricultural applications. In this review, the latest studies on delivery and extraction of pesticides using MOFs are systematically reviewed, along with some recent studies on greener ways of pest control through the slow release of chemical compounds from MOF composites. Finally, we present our insights into the key issues concerning the development and translational applications of using MOFs for targeted delivery and pesticide control.

Selective recovery of glyphosine from glyphosate mother liquor using a modified biosorbent: Competitive substitution adsorption

Here, an easy to prepare, environmentally friendly, and highly efficient biosorbent was synthesized for the selective recovery of glyphosine from glyphosate mother liquor. Batch adsorption and continuous fixed-bed column experiments were conducted to determine its adsorption properties and evaluate its potential towards practical applications. The results showed that the biosorbent exhibited a fast adsorption rate and high adsorption capacity (296.1 mg/g) toward glyphosine. Further, the biosorbent performed better under acidic conditions, and was easily regenerated using an alkaline solution, maintaining a high removal efficiency even after 5 adsorption-desorption cycles. Competitive adsorption experiments in binary and ternary systems revealed that the biosorbent showed a higher adsorption affinity toward the target glyphosine compared with glyphosate and phosphorous acid (which are the other main constituents of glyphosate mother liquor), enabling the selective recycling of glyphosine. These observations were further supported through density functional theory (DFT) calculations of the adsorption energy. Moreover, fixed-bed column experiments showed that the prepared biosorbent could maintain its high performance in actual glyphosate mother liquor. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) analyses revealed that the adsorption mechanism is strongly associated with electrostatic attraction and hydrogen bonding between -NH₃⁺ and glyphosine. Overall, the prepared biosorbent can be considered as an excellent candidate for the selective recovery of glyphosine from complicated industrial wastewater systems.

Removal of organic micropollutans by adsorptive membrane

Various emerging organic micropollutants, such as pharmaceuticals, have attracted the interest of the water industry during the last two decades due to their insufficient removal during conventional water and wastewater treatment methods and increasing demand for pharmaceuticals projected to climate change-related impacts and COVID-19, nanosorbents such as carbon nanotubes (CNTs), graphene oxides (GOs), and metallic organic frameworks (MOFs) have recently been extensively explored regarding their potential environmental applications. Due to their unique physicochemical features, the use of these nanoadsorbents for organic micropollutans in water and wastewater treatment processes has been a rapidly growing topic of research in recent literature. Adsorptive membranes, which include these nanosorbents, combine the benefits of adsorption with membrane separation, allowing for high flow rates and faster adsorption/desorption rates, and have received a lot of publicity in recent years. The most recent advances in the fabrication of adsorptive membranes (including homogeneous membranes, mixed matrix membranes, and composite membranes), as well as their basic principles and applications in water and wastewater treatment, are discussed in this review. This paper covers ten years, from 2011 to 2021, and examines over 100 published studies, highlighting that micropollutans can pose a serious threat to surface water environments and that adsorptive membranes are promising, particularly in the adsorption of trace substances with fast kinetics. Membrane fouling, on the other hand, should be given more attention in future studies due to the high costs and restricted reusability.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Ecotoxicology of glyphosate and recent advances in its mitigation by adsorption

Glyphosate (N-[phosphonomethyl]glycine) is one of the most popular herbicides now used in agricultural practice. The aim of this paper was to discuss the research progress and innovations in recent years on the mitigation of glyphosate (GLY) from aqueous media by adsorption. The ecotoxicology of GLY was discussed in the domain of its chronic and sub-chronic toxicity, genotoxicity, reproductive toxicity, and carcinogenicity, and potential risks of food contamination were discussed. It was observed that polymers and resins are the best class of adsorbents for GLY adsorption from aqueous media. GLY adsorption was best fit to either Freundlich or Langmuir isotherm depending on the nature of the adsorbent. The pseudo-second-order kinetics was also the best fit for modelling the kinetics of GLY adsorption. A review of the thermodynamics revealed that GLY adsorption was usually spontaneous and exothermic. Research trends and knowledge gaps are in the area of chemical mobility in environmental systems (especially in the presence of other chemical species), the use of heavy metal-laden adsorbent and molecular modelling. Furthermore, it was observed that the ecotoxicology of GLY still has some contentious areas where there is no conclusive stance.

Development of a needle trap device packed with titanium-based metal-organic framework sorbent for extraction of phenolic derivatives in air

We developed a novel method of needle trap device packed with titanium-based metal-organic framework for the extraction of phenolic derivatives in air followed by gas chromatography-flame ionization detector analysis. The synthetized adsorbent was packed inside a 22-gauge spinal needle. This method was first tested at laboratory scale, and then was used for field sampling of phenolic derivatives in air. A glass chamber placed on a heater at 60°C was used to provide different concentrations of phenolic derivatives. The desorption conditions and breakthrough volume were optimized using response surface methodology. The limit of detection and limit of quantitation of the proposed method were estimated to be in the range of 0.001-0.12 and 0.003-0.62 ng/mL, respectively, indicating a high sensitivity for the suggested sampler. Storing the packed needle trap device in a refrigerator at 4˚C for 60 days did not dramatically affect the storage stability. Our findings indicated that there was a high correlation coefficient (R²  = 0.99) between the measurement results of this method and the NIOSH recommended method (XAD-7 sorbent tube). Therefore, it can be concluded that the needle trap device packed with titanium-based metal-organic framework can be used as a efficient method for extraction of phenolic derivatives in air.

Insights into the Glyphosate Adsorption Behavior and Mechanism by a MnFe2O4@Cellulose-Activated Carbon Magnetic Hybrid

To enhance the removal of the negatively charged organophosphorus pesticide (OPP) glyphosate (GLY), we prepared a positively charged MnFe₂O₄@cellulose activated carbon (CAC) hybrid by immobilizing MnFe₂O₄ nanoparticles on the CAC surface via a simple one-pot solvothermal method, scanning electron microscopy, BET, transmission electron microscopy, IR, Raman, X-ray diffraction, and X-ray photoelectron spectroscopy analysis which proved the successful synthesis of MnFe₂O₄ with a particle size of 100-300 nm. The particles were distributed on the surface of CAC to form the MnFe₂O₄@CAC hybrid. MnFe₂O₄@CAC exhibited a positive charge at pH below 6 and had good magnetic properties and dispersion stability. The maximum GLY adsorption capacity of MnFe₂O₄@CAC (167.2 mg/g) was much higher than that of CAC (61.44 mg/g) and MnFe₂O₄ nanoparticles (93.48 mg/g). The adsorption process was dominated by chemisorption, and the formation of new chemical bonds between GLY and MnFe₂O₄ was confirmed by simulations. The newly formed chemical bonds were attributed to the conjugation between p electrons of the adsorbent and the d electrons of the adsorbate. Collectively, the results indicate that the as-prepared MnFe₂O₄@CAC is promising for anionic pollutant adsorption and the removal of OPPs, and our mechanistic results are of guiding significance in environmental cleanup.

Synthesis of dendrimer functionalized adsorbents for rapid removal of glyphosate from aqueous solution

Protonated PAMAM grafted adsorbents for rapid removal of glyphosate.