Simultaneous identification and quantification of bisphenol A and 12 bisphenol analogues in environmental samples using precolumn derivatization and ultra high performance liquid chromatography with tandem mass spectrometry

Transcriptome Analysis of the Developmental Effects of Bisphenol F Exposure in Chinese Medaka (Oryzias sinensis)

Bisphenol F (BPF) has been used in the syntheses of polymers, which are widely used in coatings, varnishes, adhesives, and other plastics. During the past decades, BPF contamination in the aquatic environment has dramatically increased due to its release from manmade products. Concerns have driven much attention to whether it may adversely impact aquatic lives or human beings. The present study performed an acute toxic exposure experiment and a 15 d developmental exposure of BPF at environmental concentrations (20, 200, and 2000 ng/L) using Chinese medaka (Oryzias sinensis). In the acute toxic exposure, the LC₅₀ of BPF to Chinese medaka is 87.90 mg/L at 96 h. Developmental exposure induced a significant increase in the frequency of larvae with abnormalities in the 2000 ng/L BPF group compared to the control group. Transcriptomic analysis of the whole larvae revealed 565 up-regulated and 493 down-regulated genes in the 2000 ng/L BPF exposure group. Analysis of gene ontology and KEGG pathways enrichments indicated endocrine disorders to be associated with BPF-induced developmental toxicity. The present results suggest that BPF is developmentally toxic at 2000 ng/L concentration in Chinese medaka and causes endocrine-related aberrations in the transcriptional network of genes.

A robust multi-residue method for the monitoring of 25 endocrine disruptors at ultra-trace levels in surface waters by SPE-LC-MS/MS

Estrogenic endocrine disruptors are one of the biggest ecotoxicological threats in water that pose a significant ecological burden and health-risk for humans due to their high biological activity and proven additive effects. Therefore, we have developed and validated the most comprehensive and ultra-sensitive analytical method published to date, for reliable quantification of 25 high-risk endocrine disruptors at their ecologically relevant concentrations: naturally excreted hormones (estradiol, estrone, estriol, testosterone, corticosterone, and progesterone), synthetic hormones used for contraception and menopausal symptoms (ethinylestradiol, drospirenone, chlormadinone acetate, norgestrel, gestodene, tibolone, norethindrone, dienogest, and cyproterone) and bisphenols (BPS, BPA, BPF, BPE, BPAF, BPB, BPC, and BPZ). It is based on a solid-phase extraction of water samples, followed by a robust dansyl chloride derivatization with detection by liquid chromatography-tandem mass spectrometry with a single sample preparation and two analytical methods using the same analytical column and mobile phases. The achieved limits of quantitation are in the sub-ng L^-1 range, and detection limits as low as 0.02 ng L^-1, meeting the newest proposal for environmental quality standards (EQS) by the EU water framework directive for estradiol and ethinylestradiol. The method was extensively validated and applied to seven representative Slovenian water samples, where we detected 21 out of 25 analytes; 13 were quantified in at least one sample. Estrone and progesterone were quantified in all samples, reaching levels up to 50 ng L^-1; ethinylestradiol was higher than the current EQS (0.035 ng L^-1) in three samples, and estradiol was above its EQS (0.4 ng L^-1) in one sample, proving the method's applicability and the necessity for monitoring these pollutants.

A new on-line SPE LC-HRMS method for simultaneous analysis of selected emerging contaminants in surface waters

In recent years emerging contaminants (ECs) have received significant attention due to their widespread detection in surface waters and concerns that these compounds can cause adverse ecological and/or human health effects. Therefore, accurate methods for determining and quantifying ECs in surface water are essential for estimating their environmental impact. This work describes the development, validation and application of a sensitive multiclass method for simultaneous determination of 22 per and polyfluorinated alkyl substances (PFASs), 3 pharmaceuticals, 15 pesticides, and 2 bisphenols in surface water using on-line solid phase extraction (SPE) coupled with ultra-performance liquid chromatography-high-resolution mass spectrometry (UPLC-HRMS). The method allows simultaneous sample clean-up from interfering matrices and lower limits of detection (LODs) by injecting a large sample volume into the LC system without compromising chromatographic efficiency and resolution. Linearity of response over several orders of magnitude was demonstrated for all tested compounds (R2 > 0.99), with the LODs ranging from 0.8 and 33.7 pg mL-1, allowing detection of ECs at trace levels in surface water. The method showed acceptable accuracy and precision (CV, % and RE below 20%) for all tested ECs. It also provided recoveries between 60% and 130% for all tested ECs. The validated method was successfully applied for analysis of surface water samples from three rivers (Cam, Ouse and Thames) in England. Several ECs, including perfluorooctanesulfonic acid (PFOS), perfluorobutanesulfonic acid (PFBS), perfluorohexanoic acid (PFHxA), perfluorohexane sulfonic acid (PFHxS), dimethyl-metatoluamide (DEET) and ibuprofen were observed in analysed surface water above the method's limit of quantitation (LOQ), with concentrations ranging between 3.5 and 460 pg mL-1.

Determination of multiple bisphenol analogues and their metabolites in human serum by liquid chromatography tandem mass spectrometry

To date, knowledge of internal human exposure to BPA and its analogues (particularly bisphenol S and bisphenol F, etc.) remains limited. In the present study, a method involving dispersive solid-phase extraction and LC/MS was proposed to investigate the contamination levels of 28 precursor bisphenols and 9 major metabolites in serum. The critical variables of preparation method were screened out by Plackett-Burman design and further optimized by central composite design. Left in optimal conditions, a total of 286 samples consisting of 153 males and 133 females were analyzed. The results showed that BPA dominated over all the cases with the highest positive rate (82.2% of all the surveyed people), and totally four metabolites (BPA β-D-glucuronide, BPA monosulfate, BPA bis-(β-D-glucuronide) and BPS monosulfate) were detectable. The occurrence of BPA bis-(β-D-glucuronide) in serum is reported for the first time and its higher positive rate and contamination concentrations suggested that it may be a more important metabolite of BPA than others. Negligible potential risk of health effects to blood donors was observed, since the estimated exposure levels (mean 32.1 ng/kg bw/day, 95th 123.2 ng/kg bw/day) were well below far less than the temporary tolerable reference dose of BPA that recommended by the European Food Safety Authority (4 μg/kg bw/day by). The reference level of BPA for healthy population was determined to be 4.09 μg/L via the percentile method.

Multi-residue determination of bisphenol analogues in organism tissues by ultra-high performance liquid chromatography-tandem mass spectrometry

A reliable and sensitive analyzing method was developed and validated for determination of 13 novel bisphenol analogues (BPs) along with bisphenol A (BPA) in organism tissues. The complex organism tissues were treated by ultrasonic-assisted extraction using acetonitrile/formic acid (99:1, v/v), followed by successive purification using enhanced matrix removal-lipid sorbents and primary secondary amine sorbents. The BPs were finally determined by ultra-high performance liquid chromatography-tandem mass spectrometry after derivatization using pyridine-3-sulfonyl chloride. Satisfactory recoveries of 75 - 118% were obtained for the BPs, with good repeatability (RSD < 20%). Matrix interferences were efficiently diminished. The method quantification limits (MQLs) reached 0.003 - 0.1 ng g^-1 dry weight (dw). The validated method was successfully applied to a preliminary investigation of the BPs in wild marine organisms collected from the nearshore waters along the coast of Guangdong, China. Besides BPA, novel BPs such as bisphenol F, bisphenol AF, and tetrabromobisphenol A were also detected at < MDL - 15.5 ng g^-1 dw. This work laid a strong basis for further in-depth research on bioaccumulation of the novel BPs in the environment.

Bisphenol A in the environment and recent advances in biodegradation by fungi

Bisphenol A (BPA) is a compound used in the manufacture of a wide variety of everyday materials that, when released into the environment, causes multiple detrimental effects on humans and other organisms. The reason for this review is to provide an overview of the presence, distribution, and concentration of BPA in water, soil, sediment, and air, as well as the process of release and migration, biomagnification, and exposure mechanisms that cause various toxic effects in humans. Therefore, it is important to seek efficient and economic strategies that allow its removal from the environment and prevent it from reaching humans through food chains. Likewise, the main removal techniques are analyzed, focusing on biological treatments, particularly the most recent advances in the degradation of BPA in different environmental matrices through the use of ligninolytic fungi, non-ligninolytic fungi and yeasts, as well as the possible routes of metabolic processes that allow their biotransformation or biodegradation due to their efficient extracellular enzyme systems. This review supports the importance of the application of new biotechnological tools for the degradation of BPA.

Determination of trace concentrations of simple phenols in ambient PM samples

Phenols are hazardous, but yet ubiquitous in the environment, including in atmospheric aerosols due to combustion emissions. There, phenols are subjected to secondary transformations, producing even more toxic nitrophenolic air pollutants. However, primary simple phenols, i.e. those containing only hydroxyl, methyl and methoxy substituents are not easy to detect. Trace concentrations, semi-volatile character and poorly ionizable functional groups prevent us from their determination by the most common analytical techniques, such as gas and liquid chromatography with mass spectrometric detection (GC/LC-MS). Here, we present a new derivatization method for MS/MS detection with positive ion electrospray ionization (+ESI-MS/MS) of simple phenols in atmospheric particulate matter (PM) extracts. The method is sensitive, selective, and robust, and requires no sample concentration step, which is critical due to the volatile character of the target analytes. After derivatization with dansyl chloride, phenol, catechol, cresols and guaiacol were detected in urban PM samples from Ljubljana, Slovenia. This method finally enables to study the abundance of primary phenols in atmospheric PM from different sources, which will improve understanding of secondary aerosol (trans)formation pathways and allow for more targeted mitigation strategies in respect to airborne phenolic pollutants.

A fast and direct determination of bisphenol S in thermal paper samples using paper spray ionization mass spectrometry

Concerns about human health regarding the large use of bisphenol A in thermal papers have led to its replacement by bisphenol S. Analyses of bisphenols require several sample pretreatment steps, which are laborious, expensive, and time-consuming. A paper spray ionization mass spectrometry (PSI-MS) was developed to detect and quantify bisphenol S in three different brands of thermal papers commercially available. Parameters such as paper size, and paper position relative to the mass spectrometer inlet were evaluated. The analyses were performed in selected ion monitoring mode on a linear ion trap mass spectrometer. The developed method presented absolute recovery values ranging from 92.2 to 109.04%, accuracy values from -1.2 to 9.0%, and inter assay precision from 1.8 to 5.6% and enabled LOD as low as 5 ng g^-1. The concentration of bisphenol S in all of the three brands of BPA-free thermal papers evaluated ranged from 1.36 to 6.77 μg g^-1, and the concentrarion of BPA ranged from 6.56 to 16.4 μg g^-1 in all samples of thermal paper evaluated. The PSI-MS method described here was comparable to the conventional ones, such as liquid chromatography coupled with mass spectrometry and gas chromatography coupled with mass spectrometry described in the literature. The present study proved to be practical, fast, and efficient for the direct determination of bisphenol S in thermal papers. Furthermore, the methodology here described showed to be a promising alternative to replace the classical methods for determination of bisphenol S, due to its simplicity, and no needing of any sample pretreatment.

Quantitative analysis of γ-glutamylisoleucine, γ-glutamylthreonine, and γ-glutamylvaline in HeLa cells using UHPLC-MS/MS

γ-Glutamylpeptides have been identified as potential biomarkers for a number of diseases including cancer, diabetes, and liver disease. In this study, we developed and validated a novel quantitative analytical strategy for measuring γ-glutamylisoleucine, γ-glutamylthreonine, and γ-glutamylvaline, all of which have been previously reported as potential biomarkers for prostate cancer in HeLa cells using ultra-high-performance liquid chromatography-tandem mass spectrometry. A BEH C18 column was used as the stationary phase. Mobile phase A was 99:1 water:formic acid and mobile phase B was acetonitrile. Chemical isotope labeling using benzoyl chloride was used as the internal standardization strategy. Sample preparation consisted of the addition of water to a frozen cell pellet, sonication, derivatization, centrifugation, and subsequent addition of an internal standard solution. The method was validated for selectivity, accuracy, precision, linearity, and stability. The determined concentrations of γ-glutamylisoleucine, γ-glutamylthreonine, and γ-glutamylvaline in HeLa cells were 1.92 ± 0.06, 10.8 ± 0.4, and 1.96 ± 0.04 pmol/mg protein, respectively. In addition, the qualitative analysis of these analytes in human serum was achieved using a modified sample preparation strategy. To the best of our knowledge, this is the first report of the use of benzoyl chloride for chemical isotope labeling for metabolite quantitation in cells.

The dose effect of dansyl chloride on the derivative products of bisphenols and its application for the determination of bisphenols in human serum by high-performance liquid chromatography-tandem mass spectrometry

Human exposure to bisphenols has rarely been reported. The most important challenges in this regard are the sensitivity and accuracy of the analytical methods employed. Dansyl chloride derivatization prior to high-performance liquid chromatography-tandem mass spectrometry has been prevalently employed to improve sensitivity. However, the dose effect of the derivatization reagent on the reaction products is not well understood, especially for reactants with two or more active groups. This study investigated the mass ratio of dansyl chloride to bisphenols and found the mass ratio played a vital role in changing the composition of derivatives; further, the optimal ratio for obtaining di-substituted derivatives was confirmed. Under optimal conditions, solid-phase extraction followed by dansyl chloride derivatization coupled with high-performance liquid chromatography-tandem mass spectrometry was used to detect eight bisphenols in human serum samples. The method detection limits of the eight bisphenols were 0.025-0.28 ng/mL, and the recoveries were 72.9-121.7% by spiking bisphenols (2, 5, and 20 ng/mL) into bovine serum. The detection frequencies of bisphenol A and bisphenol F in 73 serum samples obtained from children from Guangzhou were 41.1% and 71.2%, respectively, while the detection frequencies of other bisphenols were below 20%. The concentrations of bisphenol A and bisphenol F were < 0.28-8.0 ng/mL and < 0.028-7.6 ng/mL, respectively.

A new LC/MS method for specific determination of human systemic exposure to bisphenol A, F and S through their metabolites: Application to cord blood samples

Due to restriction of the use of BPA, several structural analogues such as BPS and BPF have been proposed for its replacement in many consumer products. This has increased the prevalence of BPS and BPF in urine from tested cohorts. However, these substitutes have similar endocrine disrupting properties to BPA, particularly on reproductive and metabolic functions, which suggests that fetal exposure to these analogues could be of concern for human health. Bisphenols (BPs) are mainly metabolized to glucuronides (BP-Gs), which are considered as inactive but provide a relevant marker of fetal exposure during pregnancy. In most instances, these metabolites are indirectly quantified after hydrolysis and measurement of the corresponding native BPs, which may lead to bias due to spurious BPs contamination during blood collection and/or analyses. We have developed a new method for direct quantification of BP-Gs, which has the advantage of not being affected by errors related to the presence of BPs. First, BP-Gs were extracted from plasma by anion exchange solid phase extraction. They were then labelled with dansyl chloride, using experimentally-optimized incubation conditions, after which the dansyl derivatives were injected into an on-line SPE-UHPLC/MS/MS system. The performance of the method, in terms of sensitivity, precision and accuracy, was evaluated in plasma over a concentration range of 0.05-5 ng/mL. The intra- and inter-day CV% precision were lower than 20% with accuracies ranging from 93% to 115%. The limit of quantification was set at 0.05 ng/mL. The method was then applied to measure BP-Gs in forty-four cord plasma samples. Although no BPF-G was found, BPA-G and BPS-G was determined in almost half of the cord plasma samples with concentration ranges nd-0.089 ng/mL and nd-0.586 ng/mL, respectively.

Detection of biogenic amines in pet food ingredients by RP-HPLC with automated dansyl chloride derivatization

The detection of biogenic amines is of significant interest to the food industry, as they can be used as indicators of food spoilage and they are potentially toxic. Because of their importance, there is a need for automated methods suitable for industry use that can detect a wide range of biogenic amines at sufficient levels for food analysis. In this work, optimized conditions for the automated determination of biogenic amines (histamine, putrescine, cadaverine, spermine, spermidine, tyramine, and tryptamine) derivatized with dansyl chloride are presented. Limits of detection below 0.2 ppm were achieved for seven biogenic amines and percentage recoveries were between 80 and 109% for the seven analytes spiked into meat meal samples. The method is simple and compared well to an existing method for the detection of biogenic amines in pet food ingredients.