An eco-friendly sample preparation procedure based on air-assisted liquid-liquid microextraction for the rapid determination of phthalate metabolites in urine samples by liquid chromatography-tandem mass spectrometry

Urinary phthalate metabolite (mPAEs) analysis is a reliable tool for assessing human exposure to phthalates. With growing interest in urinary biomonitoring of these metabolites, there is a need for fast and sensitive analytical methods. Therefore, a simple, rapid procedure for simultaneous determination of fifteen phthalate metabolites in human urine samples by liquid chromatography-tandem mass spectrometry was developed. The novelty of the present procedure is based on the use of diethyl carbonate as a green biobased extraction solvent and air-assisted liquid-liquid microextraction (AALLME) as a sample preparation step. A Plackett-Burman design was used for screening the factors that influence the AALLME extraction efficiency of mPAEs. The effective factors were then optimized by response surface methodology using a central composite rotatable design. Under the optimized conditions, good linearity can be achieved in a concentration range of 1.0-20.0 ng mL-1 with correlation coefficients higher than 0.99. The repeatability and reproducibility precision were in the range of 2-12% and 1-10% respectively. Recoveries ranging from 90% to 110%. This, and the low limits of detection, ranging from 0.01 to 0.05 ng mL-1, make the proposed procedure sensitive and suitable for human biomonitoring of phthalate exposures. For proof-of-principle, the new method was used to measure the urinary concentrations of mPAEs in 20 urine samples from Brazilian women. The high frequency of detections and in part high concentrations of mPAEs indicate to widespread exposure to several phthalates among Brazilian women.

Urinary levels of 30 metal/metalloids in the Brazilian southeast population: Findings from the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil)

The assessment of risks associated with environmental exposure to metals/metalloids requires well-established reference values for each population since it varies considerably according to distinct local/regional characteristics. However, very few studies establish baseline values for these elements (essential and toxic) in large population groups, especially in Latin American countries. This study was aimed at establishing urinary reference levels of 30 metals/metalloids: aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), cadmium (Cd), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), lanthanum (La), lead (Pb), lithium (Li), strontium (Sr), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), platinum (Pt), rubidium (Rb), selenium (Se), silver (Ag), tin (Sn), tellurium (Te), thallium (Tl), thorium (Th), tungsten (W), uranium (U) and zinc (Zn) in a Brazilian southeast adult population. This pilot study is a cross-sectional analysis conducted with the first wave of the ELSA-Brasil cohort (baseline examination). A total of 996 adults (45.5% men, N = 453, mean age: 50.5, and 54.5% women, N = 543, mean age: 50.6) were included in the study. Sample analyses were performed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Percentiles (2.5, 10, 25, 50, 75, 95 (CI95%), and 97.5) of each element (μg/g of creatinine) in the study are presented according to sex. Moreover, differences in the mean metal/metalloid urinary levels according to age, education, smoking, and alcohol intake are also presented. Finally, median found values were compared to established values of large human biomonitoring surveys previously conducted in North America and France. This is the first comprehensive and systematic human biomonitoring study that established population reference ranges for 30 (essential and/or toxic elements) in a Brazilian population group.

A fast and direct determination of bisphenol S in thermal paper samples using paper spray ionization mass spectrometry

Concerns about human health regarding the large use of bisphenol A in thermal papers have led to its replacement by bisphenol S. Analyses of bisphenols require several sample pretreatment steps, which are laborious, expensive, and time-consuming. A paper spray ionization mass spectrometry (PSI-MS) was developed to detect and quantify bisphenol S in three different brands of thermal papers commercially available. Parameters such as paper size, and paper position relative to the mass spectrometer inlet were evaluated. The analyses were performed in selected ion monitoring mode on a linear ion trap mass spectrometer. The developed method presented absolute recovery values ranging from 92.2 to 109.04%, accuracy values from -1.2 to 9.0%, and inter assay precision from 1.8 to 5.6% and enabled LOD as low as 5 ng g^-1. The concentration of bisphenol S in all of the three brands of BPA-free thermal papers evaluated ranged from 1.36 to 6.77 μg g^-1, and the concentrarion of BPA ranged from 6.56 to 16.4 μg g^-1 in all samples of thermal paper evaluated. The PSI-MS method described here was comparable to the conventional ones, such as liquid chromatography coupled with mass spectrometry and gas chromatography coupled with mass spectrometry described in the literature. The present study proved to be practical, fast, and efficient for the direct determination of bisphenol S in thermal papers. Furthermore, the methodology here described showed to be a promising alternative to replace the classical methods for determination of bisphenol S, due to its simplicity, and no needing of any sample pretreatment.

Evaluation of bisphenol A levels in Nigerian thermal receipts and estimation of daily dermal exposure

Bisphenol A (BPA) is a high production volume chemical that has wide industrial applications, especially as a color developer in thermal papers. The present study focused on the determination of levels of BPA in thermal receipts collected from different locations in Akure, Nigeria, and the estimation of daily intake of BPA through dermal absorption. Thermal receipts were collected from different locations, and the levels of extracted BPA were determined using fluorescence spectroscopy. The daily intake of BPA was estimated, and the amount was compared with the reference value. BPA was detected in all the samples analyzed with levels ranging from 1.50 to 3.16 mg/g. These values were lower than the values detected in thermal receipts obtained from other countries. The estimated mean daily intakes of BPA by dermal absorption due to handling of thermal receipts were 0.20 and 9.89 μg/day for the general population and the occupationally exposed individuals, respectively, and were much lower than the reference value of 50 μg/kg bw/day provided by the European Food Safety Authority. This indicates that dermal exposure to BPA is not a serious health risk to the population.

Occurrence and abundance of clinically relevant antimicrobial resistance genes in environmental samples after the Brumadinho dam disaster, Brazil

On January 25th 2019, the structure damming a pond containing ore mining wastes and iron burst at Brumadinho City, Brazil. About 11.7 million m³ of a tailings-mud mixture was released from the dam, causing destruction along 300 km of the Paraopeba River toward the São Francisco River. The environments with a high content of metals may provide a suitable environment for horizontal gene transfer, including antimicrobial resistance genes (ARGs). Therefore, this study aimed to detect and quantify clinically relevant ARGs in environmental samples after the Brumadinho dam disaster. Soil, sediment, and water samples were collected within 300 km of the Brumadinho dam disaster at unaffected and affected sites. Physical-chemical parameters of water samples were measured. Total DNA was extracted and 65 clinically relevant ARGs were researched by PCR. The most prevalent ARGs were selected for real-time quantitative PCR analysis. The average of the physical-chemical parameters was higher in the affected sites when compared to the unaffected sites, especially turbidity, concentration of Fe and Al. A total of 387 amplicons from 29 ARGs were detected, which confer resistance to β-lactams, quinolones, aminoglycosides, tetracyclines, sulphonamides, phenicols, macrolides, glycopeptides, and polymyxins, including extended-spectrum β-lactamases-encoding genes, and mcr-7.1. The sul1 gene had higher total concentrations than bla_TEM, tetB and qnrB in the environmental samples, and the diversity and abundance of ARGs increased at the sites affected by the Brumadinho dam disaster. Therefore, we point out that the contamination by the Brumadinho dam disaster tailings resulted in an increase in the amount and abundance of ARGs in the environment.

High Levels of Bisphenol A and Bisphenol S in Brazilian Thermal Paper Receipts and Estimation of Daily Exposure

Bisphenol A (BPA) is an endocrine and metabolic disruptor commonly employed as a color developer in thermal papers. Consequently, BPA derived from thermal papers has been considered an important source of exposure for humans, since this chemical may migrate from paper to skin upon contact. Further, due to recent restrictions on BPA use in some countries, it has been replaced by a new analogue, bisphenol S (BPS). The aim of the present study was to determine levels of BPA and BPS in 190 different thermal receipts, randomly collected from different locations in São Paulo State, Brazil, including receipts from supermarkets, general and fast-food restaurants, gas stations, bus and airplane tickets, and credit card and bank accounts. BPA and/or BPS were detected in 98% of samples at concentrations ranging from below the quantification limit to 4.3% (mg/100 mg paper). The obtained values were higher than amounts previously reported in other countries. The estimated daily intake through dermal absorption from handling of thermal receipt papers was estimated on the basis of concentrations and frequencies of handling of papers by humans in both the general population and occupationally exposed individuals. Fifth percentile, median, and 95th percentile daily intakes by the general population were 0.44, 1.42, and 2 μg/d, respectively, whereas the corresponding values for occupationally exposed population are 21.8, 71 and 101 μg/d. The potential adverse consequences of elevated occupational exposure are currently being examined.